Add power sequence for vpu4 by reusing from previous generation wherever
possible. Hook up vpu4 op with vpu4 specific implemtation or resue from
earlier generation wherever feasible, like clock calculation in this
case.
Co-developed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some of the sequence and calculations for vpu4 is identical to vpu35,
namely power sequence for vpu controller and the clock frequency
calculation. Move those to common file that can be shared for both vpu35
and vpu4. This patch prepares for power sequence for vpu4 which is added
in subsequent patch.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Co-developed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some of vpu4 register defines are common with vpu3x. Move those into the
common register defines header. This is done to reuse the defines for
vpu4 in subsequent patch which enables the power sequence for vpu4.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Co-developed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
vpu4 needs an additional configuration with respect to CP regions. Make
the CP configuration as array such that the multiple configuration can be
managed per platform.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Co-developed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
vpu4 depends on more than one clock source. Thus far hardware versions
up to vpu3x have been clocked by a single source.
This adds support for multiple clocks by,
- Adding a lookup table
- Configuring OPP table for video device with different video clocks
- Setting OPP for multiple clocks during dev_pm_opp_set_opp()
This patch extends the support for multiple clocks in driver, which
would be used in subsequent patch for kaanapali, when the platform data
is prepared.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Co-developed-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD and
V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE controls.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for V4L2_CID_HFLIP and V4L2_CID_VFLIP controls in encoder.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add rotation control for encoder, enabling V4L2_CID_ROTATE and handling
90/180/270 degree rotation.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add members enc_scale_width, enc_scale_height to the struct iris_inst to
support scale requirements.
Add output width and height settings in iris_venc_s_fmt_output to
enable scaling functionality.
Add VPSS buffer to platform data, which the scale function requires.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The setting of HFI_PROP_CROP_OFFSETS for the OUTPUT port is correct,
but on the CAPTURE port it is used to inform the firmware about the
region of interest, so crop_offset needs to be handled accordingly.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add members enc_raw_width, enc_raw_height to the struct iris_inst to
support codec alignment requirements.
HFI_PROP_RAW_RESOLUTION needs to be set to the actual YUV resolution.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The message for attempting to set already configured input or output
parameter subscribe change properties is not an error condition.
Move it from error to debug level and make it more descriptive by
indicating which specific input or output psc was already set.
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
As we get ready for kzalloc checking for invalid sizes, let's add
documentation for the cases where the size is different but valid.
This patch fixes this cocci warning:
./platform/qcom/iris/iris_hfi_gen2_command.c:1215:9-25: WARNING: casting value returned by memory allocation function to (struct iris_inst *) is useless.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
During normal playback, stream-on for input is followed by output, and
only after input stream-on does actual streaming begin. However, when
gst-play performs a seek, both input and output streams are stopped,
and on restart, output stream-on occurs first. At this point, firmware
has not yet started streaming. Queuing output buffers before the firmware
begins streaming causes it to process buffers in an invalid state, leading
to an error response. These buffers are returned to the driver as errors,
forcing the driver into an error state and stopping playback.
Fix this by deferring output buffer queuing until stream-on completes.
Input buffers can still be queued before stream-on as required.
Fixes: 92e007ca5a ("media: iris: Add V4L2 streaming support for encoder video device")
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In iris_kill_session, inst->state is set to IRIS_INST_ERROR and
session_close is executed, which will kfree(inst_hfi_gen2->packet).
If stop_streaming is called afterward, it will cause a crash.
Add a NULL check for inst_hfi_gen2->packet before sendling STOP packet
to firmware to fix that.
Fixes: 11712ce70f ("media: iris: implement vb2 streaming ops")
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware.
Fixes: 73702f45db ("media: iris: allocate, initialize and queue internal buffers")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The resolution property is not supposed to be set during reconfig.
Existing iris_drc_pending(inst) check is insufficient, as it doesn't
cover the first port setting change.
Extend the conditional check to also skip resolution setting when
the instance is in IRIS_INST_SUB_FIRST_IPSC.
Fixes: caf2055487 ("media: iris: Avoid updating frame size to firmware during reconfig")
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Move `list_add_tail()` to after `dma_alloc_attrs()` succeeds when creating
internal buffers. Previously, the buffer was enqueued in `buffers->list`
before the DMA allocation. If the allocation failed, the function returned
`-ENOMEM` while leaving a partially initialized buffer in the list, which
could lead to inconsistent state and potential leaks.
By adding the buffer to the list only after `dma_alloc_attrs()` succeeds,
we ensure the list contains only valid, fully initialized buffers.
Fixes: 73702f45db ("media: iris: allocate, initialize and queue internal buffers")
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Two platform-data fields for SM8750 were missed:
- get_vpu_buffer_size = iris_vpu33_buf_size
Without this, the driver fails to allocate the required internal
buffers, leading to basic decode/encode failures during session
bring-up.
- max_core_mbps = ((7680 * 4320) / 256) * 60
Without this capability exposed, capability checks are incomplete and
v4l2-compliance for encoder fails.
Fixes: a5925a2ce0 ("media: iris: add VPU33 specific encoding buffer calculation")
Fixes: a6882431a1 ("media: iris: Add support for ENUM_FRAMESIZES/FRAMEINTERVALS for encoder")
Cc: stable@vger.kernel.org
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Currently v4l2_m2m_ioctl_{de,enc}coder_cmd is being invoked during STOP
command handling. However, this is not required as the iris driver has
its own drain and stop handling mechanism in place.
Using the m2m command API in this context leads to incorrect behavior,
where the LAST flag is prematurely attached to a capture buffer,
when there are no buffers in m2m source queue. But, in this scenario
even though the source buffers are returned to client, hardware might
still need to process the pending capture buffers.
Attaching LAST flag prematurely can result in the capture buffer being
removed from the destination queue before the hardware has finished
processing it, causing issues when the buffer is eventually returned by
the hardware.
To prevent this, remove the m2m API usage in stop handling.
Fixes: d09100763b ("media: iris: add support for drain sequence")
Fixes: 75db90ae06 ("media: iris: Add support for drain sequence in encoder video device")
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
According to 4.5.1.5 of the M2M stateful decoder UAPI documentation,
providing the width and the height to S_FMT is "required only if it
cannot be parsed from the stream", otherwise they can be left as 0
and the S_FMT implementation is expected to return a valid placeholder
resolution that would let REQBUFS succeed.
iris was missing the fallback, so clients like rpi-ffmpeg wouldn't work.
Fix by adding an explicit fallback to defaults.
Fixes: b530b95de2 ("media: iris: implement s_fmt, g_fmt and try_fmt ioctls")
Link: https://github.com/jc-kynesim/rpi-ffmpeg/issues/103
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
iris_venc_s_param() uses do_div to divide two 64 bits operators, this is
wrong. Luckily for us, both of the operators fit in 32 bits, so we can use
a normal division.
Now that we are at it, mark the fps smaller than 1 as invalid, the code
does not seem to handle them properly.
The following cocci warning is fixed with this patch:
./platform/qcom/iris/iris_venc.c:378:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_u64 instead
Fixes: 4ff586ff28 ("media: iris: Add support for G/S_PARM for encoder video device")
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When the ffmpeg decoder is running, the driver receives the
V4L2_BUF_FLAG_KEYFRAME flag in the input buffer. The driver then forwards
this flag information to the firmware. The firmware, in turn, copies the
input buffer flags directly into the output buffer flags. Upon receiving
the output buffer from the firmware, the driver observes that the buffer
contains the HFI_BUFFERFLAG_DATACORRUPT flag. The root cause is that both
V4L2_BUF_FLAG_KEYFRAME and HFI_BUFFERFLAG_DATACORRUPT are the same value.
As a result, the driver incorrectly interprets the output frame as
corrupted, even though the frame is actually valid. This misinterpretation
causes the driver to report an error and skip good frames, leading to
missing frames in the final video output and triggering ffmpeg's "corrupt
decoded frame" error.
To resolve this issue, the input buffer flags should not be sent to the
firmware during decoding, since the firmware does not require this
information.
Fixes: 17f2a485ca ("media: iris: implement vb2 ops for buf_queue and firmware response")
Cc: stable@vger.kernel.org
Signed-off-by: Vishnu Reddy <quic_bvisredd@quicinc.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This reverts commit ad699fa78b.
Revert the check that skipped stop_streaming when the instance was in
IRIS_INST_ERROR, as it caused multiple regressions:
1. Buffers were not returned to vb2 when the instance was already in
error state, triggering warnings in the vb2 core because buffer
completion was skipped.
2. If a session failed early (e.g. unsupported configuration), the
instance transitioned to IRIS_INST_ERROR. When userspace attempted
to stop streaming for cleanup, stop_streaming was skipped due to the
added check, preventing proper teardown and leaving the firmware
in an inconsistent state.
Fixes: ad699fa78b ("media: iris: Add sanity check for stop streaming")
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Venus encoder and decoder video devices currently report the same
bus_info string ("platform:qcom-venus").
Assign unique bus_info identifiers by appending ":dec" and ":enc" to the
parent device name. With this change v4l2-ctl will display two separate
logical devices
Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
On SM8250 (IRIS2) with firmware older than 1.0.087, the firmware could
not handle a dummy device address for EOS buffers, so a NULL device
address is sent instead. The existing check used IS_V6() alongside a
firmware version gate:
if (IS_V6(core) && is_fw_rev_or_older(core, 1, 0, 87))
fdata.device_addr = 0;
else
fdata.device_addr = 0xdeadb000;
However, SC7280 which is also V6, uses a firmware string of the form
"1.0.<commit-hash>", which the version parser translates to 1.0.0. This
unintentionally satisfies the `is_fw_rev_or_older(..., 1, 0, 87)`
condition on SC7280. Combined with IS_V6() matching there as well, the
quirk is incorrectly applied to SC7280, causing VP9 decode failures.
Constrain the check to IRIS2 (SM8250) only, which is the only platform
that needed this quirk, by replacing IS_V6() with IS_IRIS2(). This
restores correct behavior on SC7280 (no forced NULL EOS buffer address).
Fixes: 47f867cb1b ("media: venus: fix EOS handling in decoder stop command")
Cc: stable@vger.kernel.org
Reported-by: Mecid <mecid@mecomediagroup.de>
Closes: https://github.com/qualcomm-linux/kernel-topics/issues/222
Co-developed-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When hfi_session_flush is issued, all queued buffers are returned to
the V4L2 driver. Some of these buffers are not processed and have
bytesused = 0. Currently, the driver marks such buffers as error even
during drain operations, which can incorrectly flag EOS buffers.
Only capture buffers with zero payload (and not EOS) should be marked
with VB2_BUF_STATE_ERROR. The check is performed inside the non-EOS
branch to ensure correct handling.
Fixes: 51df3c81ba ("media: venus: vdec: Mark flushed buffers with error state")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the mgb4 GMSL1 and GMSL3-coax modules info.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for GMSL3 modules with a coaxial interface, a variant of the
already existing module with the id #4. The FW is the same as for all other
GMSL3 modules.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for GMSL1 modules. GMSL1 modules have 2 inputs, 2 outputs and
require a separate FW (id #3).
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Return 0 from disable_streams, use div_u64() instead of do_div(), use
dev_dbg() for a debug message and move loop variable definition into the
loop itself.
Signed-off-by: Himanshu Bhavani <himanshu.bhavani@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
This patch sets the current exposure time as maximum for the
flash_duration control. As Flash/Strobes which are longer than the
exposure time have no effect.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
[Sakari Ailus: Some lines rewrapped.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
As the granularity of the hardware supported values is lower than the
control value, implement a try_ctrl() function for
V4L2_CID_FLASH_DURATION. This function calculates the nearest possible
µs strobe duration for the given value and returns it back to the
caller.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add V4L2_CID_FLASH_DURATION support using the "strobe_frame_span"
feature of the sensor. This is implemented by transforming the given µs
value by an interpolated formula to a "span step width" value and
writing it to register PWM_CTRL_25, PWM_CTRL_26, PWM_CTRL_27,
PWM_CTRL_28 (0x3925, 0x3926, 0x3927, 0x3928).
The maximum control value is set to the period of the current default
framerate.
All register values are based on the OV9281 datasheet v1.53 (jan 2019)
and tested using an ov9281 VisionComponents module.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
[Sakari Ailus: Remove redundant assignment of ret, declare ret as last.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add V4L2_CID_FLASH_STROBE_OE enable/disable support using the
"strobe output enable" feature of the sensor.
All values are based on the OV9281 datasheet v1.53 (january 2019) and
tested using an ov9281 VisionComponents module.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add #define's for the output enable registers (0x3004, 0x3005, 0x3006),
also known as SC_CTRL_04, SC_CTRL_05, SC_CTRL_04. Use those register
definitions instead of the raw values in the `common_regs` struct.
All values are based on the OV9281 datasheet v1.53 (january 2019).
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add the new strobe duration and hardware strobe output enable to v4l
uAPI documentation. Additionally add labels for cross-referencing v4l
controls.
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a control V4L2_CID_FLASH_STROBE_OE to en- or disable the
strobe output of v4l2 devices (most likely sensors).
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add a V4L2_CID_FLASH_DURATION control to set the duration of a
flash/strobe pulse. This controls the length of the flash/strobe pulse
output by device (typically a camera sensor) and connected to the flash
controller. This is different to the V4L2_CID_FLASH_TIMEOUT control,
which is implemented by the flash controller and defines a limit after
which the flash is "forcefully" turned off again.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Richard Leitner <richard.leitner@linux.dev>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The imx219_update_pad_format() is short and called from a single place,
in imx219_set_pad_format(). Inline the code in the caller to keep all
format adjustments grouped in a single place and improve readability.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Prepare for adding more media bus codes.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
ccs_propagate() no longer stores information in the driver's context
struct. The which parameter can thus be removed.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Compute scaling configuration from sub-device state instead of storing it
to the driver's device context struct.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Calculate binning configuration from sub-device state so the state related
configuration can be removed from the driver's device context struct.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Replace the use of mutex_{,un}lock() by guard() and scoped_guard() where
it makes sense (i.e. everywhere).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Rely on sub-device state locking to serialise access to driver's data
structures. The driver-provided mutex is used as the state lock for all
driver sub-devices.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
As it's now easier to obtain the necessary information on crop and compose
rectangles after moving to sub-device state, remove the
ccs_get_crop_compose helper.
Also remove the comp arguments of the compose goodness calculators and
make related local variables and function arguments const where
applicable.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Digital gain wraps-around at the maximum of 16838 / 0x3fff.
Fix the maximum digital gain by setting it to 0x3fff.
Signed-off-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Fixes: 0827b58dab ("media: i2c: add ov01a10 image sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix indentation in ov01a10_get_pm_resources().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
