mirror of
https://github.com/torvalds/linux.git
synced 2026-07-29 18:51:21 +02:00
cfa262efab
1402727 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Chin-Yen Lee
|
cfa262efab |
wifi: rtw89: wow: abstract DMA check register for RTL8922DE
The coming RTL8922DE use different register and its bit to poll if DMA becomes idle before entering WoWLAN. Abstract to share common flow. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251229030926.27004-5-pkshih@realtek.com |
||
|
Chin-Yen Lee
|
295c47806b |
wifi: rtw89: wow: add WOW_CAM update function for 8922D
For WOW_CAM update function, 8922DE use different H2C command from 8922AE. Use chip to distinguish them. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251229030926.27004-4-pkshih@realtek.com |
||
|
Ping-Ke Shih
|
355f38849e |
wifi: rtw89: wow: change type of WoWLAN pattern mask to __le32
The WoWLAN pattern mask is generated in byte stream, and actually firmware expects to see the same byte stream too. Since these byte stream is sent to firmware with 32-bit stream in little-endian order. Change to mask to __le32, and just do assignment instead of le32 conversion to wkfm fields of H2C command. For little-endian machine, it doesn't change logic at all. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251229030926.27004-3-pkshih@realtek.com |
||
|
Chin-Yen Lee
|
0b92c2cc48 |
wifi: rtw89: wow: use struct style to fill WOW CAM H2C command
The WOW CAM H2C command is used to tell firmware the content of pattern match. Use struct instead of macros to fill the data. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251229030926.27004-2-pkshih@realtek.com |
||
|
Ali Tariq
|
86c946bcc0 |
wifi: rtl8xxxu: fix slab-out-of-bounds in rtl8xxxu_sta_add
The driver does not set hw->sta_data_size, which causes mac80211 to
allocate insufficient space for driver private station data in
__sta_info_alloc(). When rtl8xxxu_sta_add() accesses members of
struct rtl8xxxu_sta_info through sta->drv_priv, this results in a
slab-out-of-bounds write.
KASAN report on RISC-V (VisionFive 2) with RTL8192EU adapter:
BUG: KASAN: slab-out-of-bounds in rtl8xxxu_sta_add+0x31c/0x346
Write of size 8 at addr ffffffd6d3e9ae88 by task kworker/u16:0/12
Set hw->sta_data_size to sizeof(struct rtl8xxxu_sta_info) during
probe, similar to how hw->vif_data_size is configured. This ensures
mac80211 allocates sufficient space for the driver's per-station
private data.
Tested on StarFive VisionFive 2 v1.2A board.
Fixes:
|
||
|
Bitterblue Smith
|
fcac0f23d4 |
wifi: rtw88: Fix inadvertent sharing of struct ieee80211_supported_band data
Internally wiphy writes to individual channels in this structure,
so we must not share one static definition of channel list between
multiple device instances, because that causes hard to debug
breakage.
For example, with two rtw88 driven devices in the system, channel
information may get incoherent, preventing channel use.
Copied from commit
|
||
|
Bitterblue Smith
|
2ba12401cc |
wifi: rtw88: Use devm_kmemdup() in rtw_set_supported_band()
Simplify the code by using device managed memory allocations.
This also fixes a memory leak in rtw_register_hw(). The supported bands
were not freed in the error path.
Copied from commit
|
||
|
Bitterblue Smith
|
0177aa828d |
wifi: rtw88: Fix alignment fault in rtw_core_enable_beacon()
rtw_core_enable_beacon() reads 4 bytes from an address that is not a
multiple of 4. This results in a crash on some systems.
Do 1 byte reads/writes instead.
Unable to handle kernel paging request at virtual address ffff8000827e0522
Mem abort info:
ESR = 0x0000000096000021
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x21: alignment fault
Data abort info:
ISV = 0, ISS = 0x00000021, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000005492000
[ffff8000827e0522] pgd=0000000000000000, p4d=10000001021d9403, pud=10000001021da403, pmd=100000011061c403, pte=00780000f3200f13
Internal error: Oops: 0000000096000021 [#1] SMP
Modules linked in: [...] rtw88_8822ce rtw88_8822c rtw88_pci rtw88_core [...]
CPU: 0 UID: 0 PID: 73 Comm: kworker/u32:2 Tainted: G W 6.17.9 #1-NixOS VOLUNTARY
Tainted: [W]=WARN
Hardware name: FriendlyElec NanoPC-T6 LTS (DT)
Workqueue: phy0 rtw_c2h_work [rtw88_core]
pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : rtw_pci_read32+0x18/0x40 [rtw88_pci]
lr : rtw_core_enable_beacon+0xe0/0x148 [rtw88_core]
sp : ffff800080cc3ca0
x29: ffff800080cc3ca0 x28: ffff0001031fc240 x27: ffff000102100828
x26: ffffd2cb7c9b4088 x25: ffff0001031fc2c0 x24: ffff000112fdef00
x23: ffff000112fdef18 x22: ffff000111c29970 x21: 0000000000000001
x20: 0000000000000001 x19: ffff000111c22040 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000
x11: 0000000000000000 x10: 0000000000000000 x9 : ffffd2cb6507c090
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 0000000000000000
x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000007f10 x1 : 0000000000000522 x0 : ffff8000827e0522
Call trace:
rtw_pci_read32+0x18/0x40 [rtw88_pci] (P)
rtw_hw_scan_chan_switch+0x124/0x1a8 [rtw88_core]
rtw_fw_c2h_cmd_handle+0x254/0x290 [rtw88_core]
rtw_c2h_work+0x50/0x98 [rtw88_core]
process_one_work+0x178/0x3f8
worker_thread+0x208/0x418
kthread+0x120/0x220
ret_from_fork+0x10/0x20
Code: d28fe202 8b020000 f9524400 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
Fixes:
|
||
|
Martin Hrůza
|
3f90942473 |
wifi: rtw88: Increase the RX gain before scanning
The driver reduces the RX gain while connected to a network located close by. In this condition scans return few results because the more distant networks can't be heard. Temporarily increase the RX gain before scanning in order to detect all available networks. Reset the RX gain back to the last recorded value once the scan finishes. Link: https://github.com/lwfinger/rtw88/issues/337 Signed-off-by: Martin Hrůza <martin.hruza123@gmail.com> Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/c2e72aff-190d-4f59-9914-2588de756385@gmail.com |
||
|
Chih-Kang Chang
|
1b40c1c757 |
wifi: rtw89: mcc: reset probe counter when receiving beacon
For BE chips, needs to transmit QoS null data periodically to ensure the connection with AP in GC+STA mode. However, in environments with interference, the Qos null data might fail to transmit successfully. Therefore, when receive the beacon from AP will reset the QoS null data failure counter to avoid unnecessary disconnection. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-13-pkshih@realtek.com |
||
|
Chih-Kang Chang
|
5e5f83fba4 |
wifi: rtw89: setting TBTT AGG number when mac port initialization
When initializing mac port, needs to set TBTT AGG number to trigger TBTT related interrupts. Otherwise, after sending join info H2C command with disconnection mode, firmware will clear TBTT AGG number. Without the setting from mac port initialization after that, this port will not be able to transmit beacons. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-12-pkshih@realtek.com |
||
|
Ping-Ke Shih
|
7b0c36c968 |
wifi: rtw89: warn unexpected polling value of XTAL SI
XTAL SI is an indirect serial interface to access registers in another hardware domain. When BT driver initializes UART interface, firmware might rarely control XTAL SI at the same time causing access racing. Current is to adjust initialization flow to avoid the racing. To make the racing visible if it still presents, add a message to address this. USB adapters might be unplugged suddenly, causing flooding messages. Check RTW89_FLAG_UNPLUGGED flag to avoid them. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-11-pkshih@realtek.com |
||
|
Chih-Kang Chang
|
d38289fd12 |
wifi: rtw89: refine C2H reg event polling timeout for LPS
The each of C2H reg event have different polling timeout. Refine the LPS C2H reg event polling timeout. Otherwise, during SER, the FW has already crashed, the leave LPS check will wait until timeout expires, causing the SER recovery to take too long. Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-10-pkshih@realtek.com |
||
|
Zong-Zhe Yang
|
0ca9cb5b8d |
wifi: rtw89: debug: support SER L0/L1 simulation via halt H2C
Original methods of SER (system error recovery) L0/L1 simulations need to leave PS mode before working. Introduce new methods to simulate SER L0/L1 and they can work under PS. Since new methods require FW support, so add a FW feature flag and configure the supported chips. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-9-pkshih@realtek.com |
||
|
Zong-Zhe Yang
|
2ac399c5f5 |
wifi: rtw89: debug: add ser_counters dbgfs
Dump counters of SER (system error recoery) L0/L1 related cases. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-8-pkshih@realtek.com |
||
|
Zong-Zhe Yang
|
44ec302e02 |
wifi: rtw89: ser: L1 skip polling status if FW runs event mode
Originally, polling FW status was required during recovering from L1. Now, because newer FW support event mode, the polling can be skipped. Add a FW feature flag and configure the supported chips. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-7-pkshih@realtek.com |
||
|
Zong-Zhe Yang
|
f4de946bdb |
wifi: rtw89: ser: enable error IMR after recovering from L1
After recovering from L1, explicitly enable error IMR to ensure next L1 SER (system error recovery) can work normally. Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-6-pkshih@realtek.com |
||
|
Ping-Ke Shih
|
b0f1289fd6 |
wifi: rtw89: mac: reset power state before switching to power on
To run power on function properly, reset power states (off/on/PS) to initial state. Otherwise, it might be unusable due to fail to power on. Since a USB adapter might play as USB mass storage with driver and then switch to WiFi adapter, causing it stays on power-on state when doing WiFi USB probe. Exclude this case. Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-5-pkshih@realtek.com |
||
|
Kuan-Chung Chen
|
de1ba591d9 |
wifi: rtw89: mlo: fix incorrect link address in management frames
Deauth frames used wrong link address after switching from default link to another, causing AP to reject subsequent auth frames. This affected not only deauth but all management frames. Fixed by setting correct mac_id to let header conversion references correct address CAM. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-4-pkshih@realtek.com |
||
|
Kuan-Chung Chen
|
fdbff29874 |
wifi: rtw89: mlo: fix missing TX null-data 1 during link switch
Fix missing null-data 1 when switching links. The FW should send a null-data 1 to notify AP before disabling the old link. Adjust the position of the H2C rtw89_fw_h2c_mlo_link_cfg to ensure proper FW behavior during link transition. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-3-pkshih@realtek.com |
||
|
Kuan-Chung Chen
|
6b31738043 |
wifi: rtw89: 8852b: increase beacon loss to 6 seconds
Intermittent beacon loss from a specific AP can lead to disconnections. Increasing the beacon loss threshold helps stabilize the connection. Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251223030651.480633-2-pkshih@realtek.com |
||
|
Rohit Chourasia
|
af04c1e8e7 |
wifi: rtlwifi: fix typo 'received' in comment
Fix typo received -> received by review. Signed-off-by: Rohit Chourasia <chourasiarohit27@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251211161911.30611-1-chourasiarohit27@gmail.com |
||
|
Ping-Ke Shih
|
d3a9e132a4 |
wifi: rtw89: correct use sequence of driver_data in skb->info
As ieee80211_tx_info is used to assist filling TX descriptor, and layout of
IEEE80211_SKB_CB(skb)->driver_data (accessing by RTW89_TX_SKB_CB()) is
union, so driver_data must be used by/after rtw89_hci_tx_write() or just
before calling rtw89_hci_tx_write(). Otherwise, ieee80211_tx_info::control
data is overwritten.
Found this by using injected packets which uses ieee80211_tx_info::control,
but always sending incorrect data rate.
Cc: Fedor Pchelkin <pchelkin@ispras.ru>
Fixes:
|
||
|
Jan Gerber
|
a2f1fc9ab6 |
wifi: rtw89: 8852au: add support for TP TX30U Plus
the device shows up like this and everything seams to work: Bus 004 Device 003: ID 3625:010d Realtek 802.11ax WLAN Adapter Signed-off-by: Jan Gerber <j@mailb.org> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251212005515.2059533-1-j@mailb.org |
||
|
Marco Crivellari
|
36f2deb2f5 |
wifi: rtw89: add WQ_PERCPU to alloc_workqueue users
This continues the effort to refactor workqueue APIs, which began with the introduction of new workqueues and a new alloc_workqueue flag in: commit |
||
|
Jose Ignacio Tornos Martinez
|
41be33d3ef |
wifi: rtw89: 8922a: set random mac if efuse contains zeroes
I have some rtl8922ae devices with no permanent mac stored in efuse. It could be properly saved and/or configured from user tools like NetworkManager, but it would be desirable to be able to initialize it somehow to get the device working by default. So, in the same way as with other devices, if the mac address read from efuse contains zeros, a random mac address is assigned to at least allow operation, and the user is warned about this in case any action needs to be considered. Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251126091905.217951-1-jtornosm@redhat.com |
||
|
Hsiu-Ming Chang
|
77653c327e |
wifi: rtw88: rtw8821cu: Add ID for Mercusys MU6H
Add support for Mercusys MU6H AC650 High Gain Wireless Dual Band USB Adapter V1.30. It is based on RTL8811CU, usb device ID is 2c4e:0105. Signed-off-by: Hsiu-Ming Chang <cges30901@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251205003245.5762-1-cges30901@gmail.com |
||
|
Bitterblue Smith
|
44d1f624bb |
wifi: rtw88: 8822b: Avoid WARNING in rtw8822b_config_trx_mode()
rtw8822b_set_antenna() can be called from userspace when the chip is powered off. In that case a WARNING is triggered in rtw8822b_config_trx_mode() because trying to read the RF registers when the chip is powered off returns an unexpected value. Call rtw8822b_config_trx_mode() in rtw8822b_set_antenna() only when the chip is powered on. ------------[ cut here ]------------ write RF mode table fail WARNING: CPU: 0 PID: 7183 at rtw8822b.c:824 rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] CPU: 0 UID: 0 PID: 7183 Comm: iw Tainted: G W OE 6.17.5-arch1-1 #1 PREEMPT(full) 01c39fc421df2af799dd5e9180b572af860b40c1 Tainted: [W]=WARN, [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: LENOVO 82KR/LNVNB161216, BIOS HBCN18WW 08/27/2021 RIP: 0010:rtw8822b_config_trx_mode.constprop.0+0x835/0x840 [rtw88_8822b] Call Trace: <TASK> rtw8822b_set_antenna+0x57/0x70 [rtw88_8822b 370206f42e5890d8d5f48eb358b759efa37c422b] rtw_ops_set_antenna+0x50/0x80 [rtw88_core 711c8fb4f686162be4625b1d0b8e8c6a5ac850fb] ieee80211_set_antenna+0x60/0x100 [mac80211 f1845d85d2ecacf3b71867635a050ece90486cf3] nl80211_set_wiphy+0x384/0xe00 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? netdev_run_todo+0x63/0x550 genl_family_rcv_msg_doit+0xfc/0x160 genl_rcv_msg+0x1aa/0x2b0 ? __pfx_nl80211_pre_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_set_wiphy+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_nl80211_post_doit+0x10/0x10 [cfg80211 296485ee85696d2150309a6d21a7fbca83d3dbda] ? __pfx_genl_rcv_msg+0x10/0x10 netlink_rcv_skb+0x59/0x110 genl_rcv+0x28/0x40 netlink_unicast+0x285/0x3c0 ? __alloc_skb+0xdb/0x1a0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x39f/0x3d0 ? import_iovec+0x2f/0x40 ___sys_sendmsg+0x99/0xe0 ? refill_obj_stock+0x12e/0x240 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x81/0x970 ? do_syscall_64+0x81/0x970 ? ksys_read+0x73/0xf0 ? do_syscall_64+0x81/0x970 ? count_memcg_events+0xc2/0x190 ? handle_mm_fault+0x1d7/0x2d0 ? do_user_addr_fault+0x21a/0x690 ? exc_page_fault+0x7e/0x1a0 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- Link: https://github.com/lwfinger/rtw88/issues/366 Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/fb9a3444-9319-4aa2-8719-35a6308bf568@gmail.com |
||
|
Roman Peshkichev
|
9f68fdcdc9 |
wifi: rtw88: fix DTIM period handling when conf->dtim_period is zero
The function rtw_set_dtim_period() accepted an 'int' dtim_period parameter, while mac80211 provides dtim_period as 'u8' in struct ieee80211_bss_conf. In IBSS (ad-hoc) mode mac80211 may set dtim_period to 0. The driver unconditionally wrote (dtim_period - 1) to REG_DTIM_COUNTER_ROOT, which resulted in 0xFF when dtim_period was 0. This caused delays in broadcast/multicast traffic processing and issues with ad-hoc operation. Convert the function parameter to u8 to match ieee80211_bss_conf and avoid the underflow by writing 0 when dtim_period is 0. Link: https://github.com/lwfinger/rtw88/issues/406 Signed-off-by: Roman Peshkichev <roman.peshkichev@gmail.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Link: https://patch.msgid.link/20251125180937.22977-1-roman.peshkichev@gmail.com |
||
|
Linus Torvalds
|
8f7aa3d3c7 |
Networking changes for 6.19.
Core & protocols
----------------
- Replace busylock at the Tx queuing layer with a lockless list. Resulting
in a 300% (4x) improvement on heavy TX workloads, sending twice the
number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue. Normally we perform queue re-selection when flow comes out
of idle, but under extreme circumstances the flows may be constantly
busy. Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already did
for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is sadly
quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for packets.
- Make MPTCP use Rx backlog processing. This lowers the lock pressure,
improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor fit
for modern container workloads, where limits are imposed using cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid unnecessarily
aggressive rcvbuf growth and overshot when the connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC 5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API
----------
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics,
as defined by the OPEN Alliance's "Advanced diagnostic features
for 100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads IPsec
and performs RSS.
- Add info to devlink params whether the current setting is the default
or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame duplication
for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers
--------------
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback
for reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which supports
Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as other
drivers) to avoid wasting resources if feature is unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211 debugfs
interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UoDR
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Replace busylock at the Tx queuing layer with a lockless list.
Resulting in a 300% (4x) improvement on heavy TX workloads, sending
twice the number of packets per second, for half the cpu cycles.
- Allow constantly busy flows to migrate to a more suitable CPU/NIC
queue.
Normally we perform queue re-selection when flow comes out of idle,
but under extreme circumstances the flows may be constantly busy.
Add sysctl to allow periodic rehashing even if it'd risk packet
reordering.
- Optimize the NAPI skb cache, make it larger, use it in more paths.
- Attempt returning Tx skbs to the originating CPU (like we already
did for Rx skbs).
- Various data structure layout and prefetch optimizations from Eric.
- Remove ktime_get() from the recvmsg() fast path, ktime_get() is
sadly quite expensive on recent AMD machines.
- Extend threaded NAPI polling to allow the kthread busy poll for
packets.
- Make MPTCP use Rx backlog processing. This lowers the lock
pressure, improving the Rx performance.
- Support memcg accounting of MPTCP socket memory.
- Allow admin to opt sockets out of global protocol memory accounting
(using a sysctl or BPF-based policy). The global limits are a poor
fit for modern container workloads, where limits are imposed using
cgroups.
- Improve heuristics for when to kick off AF_UNIX garbage collection.
- Allow users to control TCP SACK compression, and default to 33% of
RTT.
- Add tcp_rcvbuf_low_rtt sysctl to let datacenter users avoid
unnecessarily aggressive rcvbuf growth and overshot when the
connection RTT is low.
- Preserve skb metadata space across skb_push / skb_pull operations.
- Support for IPIP encapsulation in the nftables flowtable offload.
- Support appending IP interface information to ICMP messages (RFC
5837).
- Support setting max record size in TLS (RFC 8449).
- Remove taking rtnl_lock from RTM_GETNEIGHTBL and RTM_SETNEIGHTBL.
- Use a dedicated lock (and RCU) in MPLS, instead of rtnl_lock.
- Let users configure the number of write buffers in SMC.
- Add new struct sockaddr_unsized for sockaddr of unknown length,
from Kees.
- Some conversions away from the crypto_ahash API, from Eric Biggers.
- Some preparations for slimming down struct page.
- YAML Netlink protocol spec for WireGuard.
- Add a tool on top of YAML Netlink specs/lib for reporting commonly
computed derived statistics and summarized system state.
Driver API:
- Add CAN XL support to the CAN Netlink interface.
- Add uAPI for reporting PHY Mean Square Error (MSE) diagnostics, as
defined by the OPEN Alliance's "Advanced diagnostic features for
100BASE-T1 automotive Ethernet PHYs" specification.
- Add DPLL phase-adjust-gran pin attribute (and implement it in
zl3073x).
- Refactor xfrm_input lock to reduce contention when NIC offloads
IPsec and performs RSS.
- Add info to devlink params whether the current setting is the
default or a user override. Allow resetting back to default.
- Add standard device stats for PSP crypto offload.
- Leverage DSA frame broadcast to implement simple HSR frame
duplication for a lot of switches without dedicated HSR offload.
- Add uAPI defines for 1.6Tbps link modes.
Device drivers:
- Add Motorcomm YT921x gigabit Ethernet switch support.
- Add MUCSE driver for N500/N210 1GbE NIC series.
- Convert drivers to support dedicated ops for timestamping control,
and away from the direct IOCTL handling. While at it support GET
operations for PHY timestamping.
- Add (and convert most drivers to) a dedicated ethtool callback for
reading the Rx ring count.
- Significant refactoring efforts in the STMMAC driver, which
supports Synopsys turn-key MAC IP integrated into a ton of SoCs.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support PPS in/out on all pins
- Intel (100G, ice, idpf):
- ice: implement standard ethtool and timestamping stats
- i40e: support setting the max number of MAC addresses per VF
- iavf: support RSS of GTP tunnels for 5G and LTE deployments
- nVidia/Mellanox (mlx5):
- reduce downtime on interface reconfiguration
- disable being an XDP redirect target by default (same as
other drivers) to avoid wasting resources if feature is
unused
- Meta (fbnic):
- add support for Linux-managed PCS on 25G, 50G, and 100G links
- Wangxun:
- support Rx descriptor merge, and Tx head writeback
- support Rx coalescing offload
- support 25G SPF and 40G QSFP modules
- Ethernet virtual:
- Google (gve):
- allow ethtool to configure rx_buf_len
- implement XDP HW RX Timestamping support for DQ descriptor
format
- Microsoft vNIC (mana):
- support HW link state events
- handle hardware recovery events when probing the device
- Ethernet NICs consumer, and embedded:
- usbnet: add support for Byte Queue Limits (BQL)
- AMD (amd-xgbe):
- add device selftests
- NXP (enetc):
- add i.MX94 support
- Broadcom integrated MACs (bcmgenet, bcmasp):
- bcmasp: add support for PHY-based Wake-on-LAN
- Broadcom switches (b53):
- support port isolation
- support BCM5389/97/98 and BCM63XX ARL formats
- Lantiq/MaxLinear switches:
- support bridge FDB entries on the CPU port
- use regmap for register access
- allow user to enable/disable learning
- support Energy Efficient Ethernet
- support configuring RMII clock delays
- add tagging driver for MaxLinear GSW1xx switches
- Synopsys (stmmac):
- support using the HW clock in free running mode
- add Eswin EIC7700 support
- add Rockchip RK3506 support
- add Altera Agilex5 support
- Cadence (macb):
- cleanup and consolidate descriptor and DMA address handling
- add EyeQ5 support
- TI:
- icssg-prueth: support AF_XDP
- Airoha access points:
- add missing Ethernet stats and link state callback
- add AN7583 support
- support out-of-order Tx completion processing
- Power over Ethernet:
- pd692x0: preserve PSE configuration across reboots
- add support for TPS23881B devices
- Ethernet PHYs:
- Open Alliance OATC14 10BASE-T1S PHY cable diagnostic support
- Support 50G SerDes and 100G interfaces in Linux-managed PHYs
- micrel:
- support for non PTP SKUs of lan8814
- enable in-band auto-negotiation on lan8814
- realtek:
- cable testing support on RTL8224
- interrupt support on RTL8221B
- motorcomm: support for PHY LEDs on YT853
- microchip: support for LAN867X Rev.D0 PHYs w/ SQI and cable diag
- mscc: support for PHY LED control
- CAN drivers:
- m_can: add support for optional reset and system wake up
- remove can_change_mtu() obsoleted by core handling
- mcp251xfd: support GPIO controller functionality
- Bluetooth:
- add initial support for PASTa
- WiFi:
- split ieee80211.h file, it's way too big
- improvements in VHT radiotap reporting, S1G, Channel Switch
Announcement handling, rate tracking in mesh networks
- improve multi-radio monitor mode support, and add a cfg80211
debugfs interface for it
- HT action frame handling on 6 GHz
- initial chanctx work towards NAN
- MU-MIMO sniffer improvements
- WiFi drivers:
- RealTek (rtw89):
- support USB devices RTL8852AU and RTL8852CU
- initial work for RTL8922DE
- improved injection support
- Intel:
- iwlwifi: new sniffer API support
- MediaTek (mt76):
- WED support for >32-bit DMA
- airoha NPU support
- regdomain improvements
- continued WiFi7/MLO work
- Qualcomm/Atheros:
- ath10k: factory test support
- ath11k: TX power insertion support
- ath12k: BSS color change support
- ath12k: statistics improvements
- brcmfmac: Acer A1 840 tablet quirk
- rtl8xxxu: 40 MHz connection fixes/support"
* tag 'net-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1381 commits)
net: page_pool: sanitise allocation order
net: page pool: xa init with destroy on pp init
net/mlx5e: Support XDP target xmit with dummy program
net/mlx5e: Update XDP features in switch channels
selftests/tc-testing: Test CAKE scheduler when enqueue drops packets
net/sched: sch_cake: Fix incorrect qlen reduction in cake_drop
wireguard: netlink: generate netlink code
wireguard: uapi: generate header with ynl-gen
wireguard: uapi: move flag enums
wireguard: uapi: move enum wg_cmd
wireguard: netlink: add YNL specification
selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py
selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py
selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py
selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py
selftests: drv-net: introduce Iperf3Runner for measurement use cases
selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS
net: ps3_gelic_net: Use napi_alloc_skb() and napi_gro_receive()
Documentation: net: dsa: mention simple HSR offload helpers
Documentation: net: dsa: mention availability of RedBox
...
|
||
|
Linus Torvalds
|
015e7b0b0e |
bpf-next-6.19
-----BEGIN PGP SIGNATURE----- iQIzBAABCAAdFiEE+soXsSLHKoYyzcli6rmadz2vbToFAmktzC4ACgkQ6rmadz2v bTpA1w/+PZ45N3y6O+NQVIpBlpnHG7DEMK7Lw19On0xVLwH+XPHz6J5PEfzjyJR1 SCbsV30qkJ1YCtgRHHf+ZCuWPWm58hY8dXYwSDyjNavdQyVGOdf17aBu9pvH45NW K20OhwQHpCHWIfDlijjPkDdiHnYf5S7Xy6ctt/3ztF0pMDHIaghGxJymG4wULcDT iLKnT37kwO8b2ihmw/HbcZPQYMWfHRye7X009K+wCv0dnhJ6q/Ny1m+Pg4kF92e6 ON/RY26ep2dq7LpaNWa1rI1yOgFlI7uUlVojqrAuAb+xrg+64wUDBxeijvE37EN1 s/+PuEKAR6xwz1dbY2cWAI0D633saz24UdV6kCBW9HrjHKVRQ7ZSsBF9ENkS4DTK nowx4wOe1ZHc/6YgTktZp9LEn/0YrmQtFxjqEAJiYUgD18FrBrSjmhHpBiL+HghP sTqy41qDQGoKtg3bRu42Co9wmNeeLsnxT8NQExCmTYQ4ufpdA/VMQux9cBVX3GBq EchJb465+AcvvCJUiKbnHLxDsHCQz1YYytz3RqyFLgGDFZnHOE0FjwPJmM8I5kkK gvDB3ZYdO3Halm8BZfZZBnKv5uK7myuAWwqRLgMRanuZcRgmIV1oUP5EP88HdH75 fB20vZSVcfzB17SLyhiM20ivEWodJa9VCLEw9WDOmDoml+33Pks= =kaCJ -----END PGP SIGNATURE----- Merge tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to test_progs runner (Alexis Lothoré) - Convert selftests/bpf/test_xsk to test_progs runner (Bastien Curutchet) - Replace bpf memory allocator with kmalloc_nolock() in bpf_local_storage (Amery Hung), and in bpf streams and range tree (Puranjay Mohan) - Introduce support for indirect jumps in BPF verifier and x86 JIT (Anton Protopopov) and arm64 JIT (Puranjay Mohan) - Remove runqslower bpf tool (Hoyeon Lee) - Fix corner cases in the verifier to close several syzbot reports (Eduard Zingerman, KaFai Wan) - Several improvements in deadlock detection in rqspinlock (Kumar Kartikeya Dwivedi) - Implement "jmp" mode for BPF trampoline and corresponding DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong) - Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul Chaignon) - Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel Borkmann) - Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko) - Optimize bpf_map_update_elem() for map-in-map types (Ritesh Oedayrajsingh Varma) - Introduce overwrite mode for BPF ring buffer (Xu Kuohai) * tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits) bpf: optimize bpf_map_update_elem() for map-in-map types bpf: make kprobe_multi_link_prog_run always_inline selftests/bpf: do not hardcode target rate in test_tc_edt BPF program selftests/bpf: remove test_tc_edt.sh selftests/bpf: integrate test_tc_edt into test_progs selftests/bpf: rename test_tc_edt.bpf.c section to expose program type selftests/bpf: Add success stats to rqspinlock stress test rqspinlock: Precede non-head waiter queueing with AA check rqspinlock: Disable spinning for trylock fallback rqspinlock: Use trylock fallback when per-CPU rqnode is busy rqspinlock: Perform AA checks immediately rqspinlock: Enclose lock/unlock within lock entry acquisitions bpf: Remove runqslower tool selftests/bpf: Remove usage of lsm/file_alloc_security in selftest bpf: Disable file_alloc_security hook bpf: check for insn arrays in check_ptr_alignment bpf: force BPF_F_RDONLY_PROG on insn array creation bpf: Fix exclusive map memory leak selftests/bpf: Make CS length configurable for rqspinlock stress test selftests/bpf: Add lock wait time stats to rqspinlock stress test ... |
||
|
Linus Torvalds
|
b6d993310a |
linux_kselftest-kunit-6.19-rc1
Makes filter parameters configurable via Kconfig. Adds description of kunit.enable parameter documentation. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmkvebAACgkQCwJExA0N Qxw+WQ/9FsRM52lyWrZdJFTJQ5+c/im7xi5h/S9eIpGQ61ZiNtnuGPQbmNtlXVVH EaL3/OQuZic3srx4tTpTOS5iJl3+OLFi9sjIxQ6341OeHjOtvaPm+9i6zCxrgkqM 64EnXi8IKiXnam6kFJGoQbn/Xkhsxh+1jreHgZHfiVPg3gxysp75sxzPQL1Lt1Ml jZxyPQFSqTJnyP2xq+c1qK5jskXkCQiXPQAcPEItEFmsH//ZTUa8rhk8xlW1LQNn Nz5C2I1/HRAHppM2DEcehsxnGOGxNu76x/vjHZ3w8D+tV3AzJtCy+NxVIaS3Xc4K 9egMVTwDOsnX1gx7wqJ8YBAD+2K1MWMFm5R/7guppImZa35oCmqFnrZ+cifgGU8l /1SqEmF/PZ18T+EIjEfnWVDL0dHX3uZTwzx+eMj8pLnIfBnGZC2elqTrg4zhJD2M khIJ8Szc43YOk33tkKrcUmyWcQTjQ0h3UejKLZ8MfSQgTSYPa/W/0gxMKn648a7s JeJ6F2LQ5Fyt1hbzp3arFY8DxVvW3Ks6G9EhNWFhwhNPMjmcCXpKLc4A1Fy8UlXH 4oyZvorKOUqdcHBRP6nIYiuJWwZ0qjb/p7REq50GTk6MnJlbuAlZ/FxP8oFN6fEl va6pCONKRx/m05qZB7EvomhQs1KSSyFodBO9cRpFZyL1FXNgQGQ= =6Rqh -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-kunit-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kunit updates from Shuah Khan: - Make filter parameters configurable via Kconfig - Add description of kunit.enable parameter to documentation * tag 'linux_kselftest-kunit-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: Make filter parameters configurable via Kconfig Documentation: kunit: add description of kunit.enable parameter |
||
|
Linus Torvalds
|
2488655b2f |
linux_kselftest-next-6.19-rc1
Adds basic test for trace_marker_raw file to tracing selftest. Fixes invalid array access in printf dma_map_benchmark selftest. Adds tprobe enable/disable testcase to tracing selftest. Updates fprobe selftest for ftrace based fprobe. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAmkvXJ0ACgkQCwJExA0N QxxLWg/+PjZJry0x3jzyQrYNzxewcjrtH8GwGXgBXJxBGwXZYPv1AubnC3o+Ru6Q AES5s5M3Fm+oMwPc/2VhVbSWLBX4HQthsiShTCZQf7eC0uuxkE/ZCQ4qqs1usT4G l6z+AecIJcflEjX/hwb9ALoKqniwuodrhIl8oNeFgQgB3VQ55Zt3LylxBvJAKACM cqJbDMxSPOqVcRF0xm+A/WFDU5GVmt79+XhxLLg6sZmLCmmjGjE/rtDxgLPZYdE4 NGPghjYlDiAqLJZNUVbxpSKlurq1o36zOKowZO+rlhqOilxaRYoNvrll13u8zIjb Y1AkZeIU9ITzbdXfjWWgMoYOcrevfRygUGZ1R5BEwoGQ9jD0qMCDkaT5cpeBcZ53 1oYcmyP65e2GWDSywVSKuetqtTCXT5xnGpo9TQmm9lNTasB7LwkEXbP9/4FH7BCl f52T14cclZHND3XbDBdaR1ZALj2Qb5CFfuWAG2pZCNdt/jrxyEqU2RdLG95S1yDz 8diKhtflxOq627V5VtOj9VgS3AGj9pkVSSmWiyS0KjdV/v7vZWUbYhFPrJntoTiY GLAwkdGiIS6edDqQ7lqgpr8/NLxtsZwzYYIwxul+DJybAyJSt7Q3YFe9vSdDPHlf rgj1VeW+byotE3A+92nL17Yy0MhjUVS/M31EyzFupChwxScDhhE= =NOnZ -----END PGP SIGNATURE----- Merge tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - Add basic test for trace_marker_raw file to tracing selftest - Fix invalid array access in printf dma_map_benchmark selftest - Add tprobe enable/disable testcase to tracing selftest - Update fprobe selftest for ftrace based fprobe * tag 'linux_kselftest-next-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: tracing: Update fprobe selftest for ftrace based fprobe selftests: tracing: Add tprobe enable/disable testcase selftests/run_kselftest.sh: exit with error if tests fail selftests/dma: fix invalid array access in printf selftests/tracing: Add basic test for trace_marker_raw file |
||
|
Linus Torvalds
|
2ddcf4962c |
Kbuild updates for v6.19
- Enable -fms-extensions, allowing anonymous use of tagged struct or
union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary
conversion patch is added here, too (btrfs).
- Introduce architecture-specific CC_CAN_LINK and flags for userprogs
- Add new packaging target 'modules-cpio-pkg' for building a initramfs
cpio w/ kmods
- Handle included .c files in gen_compile_commands
- Minor kbuild changes:
- Use objtree for module signing key path, fixing oot kmod signing
- Improve documentation of KBUILD_BUILD_TIMESTAMP
- Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice
- Rename scripts/Makefile.extrawarn to Makefile.warn
- Drop obsolete types.h check from headers_check.pl
- Remove outdated config leak ignore entries
Signed-off-by: Nicolas Schier <nsc@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEh0E3p4c3JKeBvsLGB1IKcBYmEmkFAmkttSoACgkQB1IKcBYm
Emkt6g/+NLW1rJBCcONXIe3UlfHvo4MBziA+ItuLkYx7FwhhTTOivQgav68wXSQK
/JqQ5N8O0nO4Gznv5aJWoW+GUCKFjqaDbJDXW9pRdDNGQjXJfL82OHu9gPiUAiDJ
ffZwyeRfXtBaglWv6ovM5z6817OqUCLErqjESAMHZv4nXbXjFNi2YKwgJGmAjfNM
kiNUU1ieO2/dxgI/mMCW0UuK0jjiC0EsY1as3IkxBdVZi3dRPobLNaL4JiKHGFlZ
BlrtAoGHrqwqEQgFACVJE2BzWhW+Hwz7SyfBvF4c8T0eM/02ogcL43COh6scq0pV
2om7hFwvE/NBdbCvz0KB/q3khx9jJRagCm0o/+YEexHb1rn+LcCbomQZYRjIEcHU
mBc3DTD+B+jwiN6mow6e6E1uuKvpTrmPGBNVyQ5BMFpdlhfga7zsttLO5kMIXqAH
Fc8MsSx06YggrwGevc/39C+3uzI501Rcxu9BWdyHXfeZKeq0gZGNtkXVN2edzzKm
c4uFeDbbF3M0oeGXmtlm8I//jqeJuc0wK8d8tSXjKodo+vgppXj0s2okAwALY2jW
NVAlxqKwS7CnjBbXOsHIXSCDDL5IQ+np/gIaOkSbl6DXU50BvFV+KGvqW9hdjmwR
AEQXemqUhSvGFmYG92mLwewXWAivnxUvGTCifOhXipyikXhX/wI=
=Gn4V
-----END PGP SIGNATURE-----
Merge tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild updates from Nicolas Schier:
- Enable -fms-extensions, allowing anonymous use of tagged struct or
union in struct/union (tag kbuild-ms-extensions-6.19). An exemplary
conversion patch is added here, too (btrfs).
[ Editor's note: the core of this actually came in early through a
shared branch and a few other trees - Linus ]
- Introduce architecture-specific CC_CAN_LINK and flags for userprogs
- Add new packaging target 'modules-cpio-pkg' for building a initramfs
cpio w/ kmods
- Handle included .c files in gen_compile_commands
- Minor kbuild changes:
- Use objtree for module signing key path, fixing oot kmod signing
- Improve documentation of KBUILD_BUILD_TIMESTAMP
- Reuse KBUILD_USERCFLAGS for UAPI, instead of defining twice
- Rename scripts/Makefile.extrawarn to Makefile.warn
- Drop obsolete types.h check from headers_check.pl
- Remove outdated config leak ignore entries
* tag 'kbuild-6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: add target to build a cpio containing modules
initramfs: add gen_init_cpio to hostprogs unconditionally
kbuild: allow architectures to override CC_CAN_LINK
init: deduplicate cc-can-link.sh invocations
kbuild: don't enable CC_CAN_LINK if the dummy program generates warnings
scripts: headers_install.sh: Remove two outdated config leak ignore entries
scripts/clang-tools: Handle included .c files in gen_compile_commands
kbuild: uapi: Drop types.h check from headers_check.pl
kbuild: Rename Makefile.extrawarn to Makefile.warn
MAINTAINERS, .mailmap: Update mail address for Nicolas Schier
kbuild: uapi: reuse KBUILD_USERCFLAGS
kbuild: doc: improve KBUILD_BUILD_TIMESTAMP documentation
kbuild: Use objtree for module signing key path
btrfs: send: make use of -fms-extensions for defining struct fs_path
|
||
|
Linus Torvalds
|
784faa8eca |
Rust changes for v6.19
Toolchain and infrastructure:
- Add support for 'syn'.
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
'syn' allows us to greatly simplify writing complex macros such as
'pin-init' (Benno has already prepared the 'syn'-based version). We
will use it in the 'macros' crate too.
'syn' is the most downloaded Rust crate (according to crates.io), and
it is also used by the Rust compiler itself. While the amount of code
is substantial, there should not be many updates needed for these
crates, and even if there are, they should not be too big, e.g. +7k
-3k lines across the 3 crates in the last year.
'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'.
I only modified their code to remove a third dependency
('unicode-ident') and to add the SPDX identifiers. The code can be
easily verified to exactly match upstream with the provided scripts.
They are all licensed under "Apache-2.0 OR MIT", like the other
vendored 'alloc' crate we had for a while.
Please see the merge commit with the cover letter for more context.
- Allow 'unreachable_pub' and 'clippy::disallowed_names' for doctests.
Examples (i.e. doctests) may want to do things like show public items
and use names such as 'foo'.
Nevertheless, we still try to keep examples as close to real code as
possible (this is part of why running Clippy on doctests is important
for us, e.g. for safety comments, which userspace Rust does not
support yet but we are stricter).
'kernel' crate:
- Replace our custom 'CStr' type with 'core::ffi::CStr'.
Using the standard library type reduces our custom code footprint,
and we retain needed custom functionality through an extension trait
and a new 'fmt!' macro which replaces the previous 'core' import.
This started in 6.17 and continued in 6.18, and we finally land the
replacement now. This required quite some stamina from Tamir, who
split the changes in steps to prepare for the flag day change here.
- Replace 'kernel::c_str!' with C string literals.
C string literals were added in Rust 1.77, which produce '&CStr's
(the 'core' one), so now we can write:
c"hi"
instead of:
c_str!("hi")
- Add 'num' module for numerical features.
It includes the 'Integer' trait, implemented for all primitive
integer types.
It also includes the 'Bounded' integer wrapping type: an integer
value that requires only the 'N' less significant bits of the wrapped
type to be encoded:
// An unsigned 8-bit integer, of which only the 4 LSBs are used.
let v = Bounded::<u8, 4>:🆕:<15>();
assert_eq!(v.get(), 15);
'Bounded' is useful to e.g. enforce guarantees when working with
bitfields that have an arbitrary number of bits.
Values can be constructed from simple non-constant expressions or,
for more complex ones, validated at runtime.
'Bounded' also comes with comparison and arithmetic operations (with
both their backing type and other 'Bounded's with a compatible
backing type), casts to change the backing type, extending/shrinking
and infallible/fallible conversions from/to primitives as applicable.
- 'rbtree' module: add immutable cursor ('Cursor').
It enables to use just an immutable tree reference where appropriate.
The existing fully-featured mutable cursor is renamed to 'CursorMut'.
kallsyms:
- Fix wrong "big" kernel symbol type read from procfs.
'pin-init' crate:
- A couple minor fixes (Benno asked me to pick these patches up for
him this cycle).
Documentation:
- Quick Start guide: add Debian 13 (Trixie).
Debian Stable is now able to build Linux, since Debian 13 (released
2025-08-09) packages Rust 1.85.0, which is recent enough.
We are planning to propose that the minimum supported Rust version in
Linux follows Debian Stable releases, with Debian 13 being the first
one we upgrade to, i.e. Rust 1.85.
MAINTAINERS:
- Add entry for the new 'num' module.
- Remove Alex as Rust maintainer: he hasn't had the time to contribute
for a few years now, so it is a no-op change in practice.
And a few other cleanups and improvements.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAmks0WkACgkQGXyLc2ht
IW3QQg/+LpBmrz0ZSKH24kcX3x/hpfA2Erd4cmn+qjXev9RSAM1bt9xf3dsAhhFd
BStUpf0aglHOSEuWAvNHqEb5+yu+6qy6EFXXqH0ASexHK93t77Jbztjtf3SMlykT
N/lSJ+LWw2WiRT0NRWoTfKaEWzZQ8j9fi9Jb/IGNZGdNMryisVUYWqzLwNupPuK+
RMcEitHdO2NWjyodk2GGRyYQ7+XxQgbXZoxtgeubPSrrmGuGTXV42RlQKC2KHPx3
gz6CwcO3Xd0bGHHSgP32QDtGRJtniO8iXBKxiooT+ys+M83fTKbwNrIrW3tHdheY
765qsd/NvUmAkcgTCoLqj5biU6LCsepyimNg1vf4pYFohBoTaGeN+UqzbXBrSjy2
pmrgxwMRVHsYz+zoSKAVKJl7ASba5BXFdI4Whgfqwwc9So/X7uyujIYXGbRoznCV
W5vu7OUboBy26NvcsPrf6BqWcsJEpGV/M4z2UBRjAoJTRGQMcm/ckuo/GfYm3yW+
bUW62UmVCdY5crpo7XPH/G4ZGBR/k3p9dLVt8OJxEoTlfw4KDE5BszJoXmejZqdi
9LEMhzTWwoFp9NspQuEGdYdfGRlfG6XXqrwGZtQI+dlc4RvFEgBBu2Lxotq+Ods0
EfCVCJQjWmyCodVdJ/QqbCRFuXtOFLr/hPdWnvlrRxVkPtF2CDw=
=9nM+
-----END PGP SIGNATURE-----
Merge tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add support for 'syn'.
Syn is a parsing library for parsing a stream of Rust tokens into a
syntax tree of Rust source code.
Currently this library is geared toward use in Rust procedural
macros, but contains some APIs that may be useful more generally.
'syn' allows us to greatly simplify writing complex macros such as
'pin-init' (Benno has already prepared the 'syn'-based version). We
will use it in the 'macros' crate too.
'syn' is the most downloaded Rust crate (according to crates.io),
and it is also used by the Rust compiler itself. While the amount
of code is substantial, there should not be many updates needed for
these crates, and even if there are, they should not be too big,
e.g. +7k -3k lines across the 3 crates in the last year.
'syn' requires two smaller dependencies: 'quote' and 'proc-macro2'.
I only modified their code to remove a third dependency
('unicode-ident') and to add the SPDX identifiers. The code can be
easily verified to exactly match upstream with the provided
scripts.
They are all licensed under "Apache-2.0 OR MIT", like the other
vendored 'alloc' crate we had for a while.
Please see the merge commit with the cover letter for more context.
- Allow 'unreachable_pub' and 'clippy::disallowed_names' for
doctests.
Examples (i.e. doctests) may want to do things like show public
items and use names such as 'foo'.
Nevertheless, we still try to keep examples as close to real code
as possible (this is part of why running Clippy on doctests is
important for us, e.g. for safety comments, which userspace Rust
does not support yet but we are stricter).
'kernel' crate:
- Replace our custom 'CStr' type with 'core::ffi::CStr'.
Using the standard library type reduces our custom code footprint,
and we retain needed custom functionality through an extension
trait and a new 'fmt!' macro which replaces the previous 'core'
import.
This started in 6.17 and continued in 6.18, and we finally land the
replacement now. This required quite some stamina from Tamir, who
split the changes in steps to prepare for the flag day change here.
- Replace 'kernel::c_str!' with C string literals.
C string literals were added in Rust 1.77, which produce '&CStr's
(the 'core' one), so now we can write:
c"hi"
instead of:
c_str!("hi")
- Add 'num' module for numerical features.
It includes the 'Integer' trait, implemented for all primitive
integer types.
It also includes the 'Bounded' integer wrapping type: an integer
value that requires only the 'N' least significant bits of the
wrapped type to be encoded:
// An unsigned 8-bit integer, of which only the 4 LSBs are used.
let v = Bounded::<u8, 4>:🆕:<15>();
assert_eq!(v.get(), 15);
'Bounded' is useful to e.g. enforce guarantees when working with
bitfields that have an arbitrary number of bits.
Values can also be constructed from simple non-constant expressions
or, for more complex ones, validated at runtime.
'Bounded' also comes with comparison and arithmetic operations
(with both their backing type and other 'Bounded's with a
compatible backing type), casts to change the backing type,
extending/shrinking and infallible/fallible conversions from/to
primitives as applicable.
- 'rbtree' module: add immutable cursor ('Cursor').
It enables to use just an immutable tree reference where
appropriate. The existing fully-featured mutable cursor is renamed
to 'CursorMut'.
kallsyms:
- Fix wrong "big" kernel symbol type read from procfs.
'pin-init' crate:
- A couple minor fixes (Benno asked me to pick these patches up for
him this cycle).
Documentation:
- Quick Start guide: add Debian 13 (Trixie).
Debian Stable is now able to build Linux, since Debian 13 (released
2025-08-09) packages Rust 1.85.0, which is recent enough.
We are planning to propose that the minimum supported Rust version
in Linux follows Debian Stable releases, with Debian 13 being the
first one we upgrade to, i.e. Rust 1.85.
MAINTAINERS:
- Add entry for the new 'num' module.
- Remove Alex as Rust maintainer: he hasn't had the time to
contribute for a few years now, so it is a no-op change in
practice.
And a few other cleanups and improvements"
* tag 'rust-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (53 commits)
rust: macros: support `proc-macro2`, `quote` and `syn`
rust: syn: enable support in kbuild
rust: syn: add `README.md`
rust: syn: remove `unicode-ident` dependency
rust: syn: add SPDX License Identifiers
rust: syn: import crate
rust: quote: enable support in kbuild
rust: quote: add `README.md`
rust: quote: add SPDX License Identifiers
rust: quote: import crate
rust: proc-macro2: enable support in kbuild
rust: proc-macro2: add `README.md`
rust: proc-macro2: remove `unicode_ident` dependency
rust: proc-macro2: add SPDX License Identifiers
rust: proc-macro2: import crate
rust: kbuild: support using libraries in `rustc_procmacro`
rust: kbuild: support skipping flags in `rustc_test_library`
rust: kbuild: add proc macro library support
rust: kbuild: simplify `--cfg` handling
rust: kbuild: introduce `core-flags` and `core-skip_flags`
...
|
||
|
Linus Torvalds
|
51ab33fc0a |
livepatching changes for 6.19
-----BEGIN PGP SIGNATURE----- iQJPBAABCAA5FiEESH4wyp42V4tXvYsjUqAMR0iAlPIFAmkumVobFIAAAAAABAAO bWFudTIsMi41KzEuMTEsMiwyAAoJEFKgDEdIgJTypHMQALImoj39UZiLLVMn2d4P 5droOQw+qMCfsVVY5m9Rqw3vrCsSds+7eC5Qa2GaXR480l4ZeMGyoYCr+2gDWcM3 vwTWuj8UuUOxQlMXubIFyL9r/SUtYSiqfAPK5tGtzHuNNUEHWGed9r5RrOGKZOnj SDe6ZL5G2Kekuua1mtSZhw8qpW/nK2IuFTRPxN6O243dUGtX0wkzWr1tVRpDDzoT UNWZ2xoE1lzb/EAviyuSgSIc5YsT50bM+fMzOUHsY/E9u8fI42N1z5B+P3ZlTvGx Z5nJ79ZMtbF3/4o6OaUqvR9Y4zZ73TtkMoV4sjrjYg28q+n4/tqVlCsjy0Hys/dP MlaKbLSI54+RldTWx02Yu0jcn2Artua3N0bURyEenqkhDLW9RXVfx/h29QQYPpE9 7FSlpUAQnFzFbGUGJcB02oClkxUSUcOuzVqC0n30wfdo+bVzDn19rr+Vi2bHe8TD MsASva96n2FhRVPkm8eBxnxpaYQj9Q6G1/7B1F30Et7PLzwD9qYUvXPXceyPATnd r3hdUiKgkPvUaDhApJRHwv/ZGnNDKujGBDc/YgBQrl3cPfG0ShGzJzWz892JjX0+ NB+O+eabHVs6tFRFNvxS2fu/ROZxrGfBzZUKoaZjZh3JEgOhlLKVlL7aRqtctFvP Dz0QYiOqlkjho7FykCIEKXxQ =6o9X -----END PGP SIGNATURE----- Merge tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching Pull livepatching updates from Petr Mladek: - Support both paths where tracefs is typically mounted in selftests - Make old_sympos 0 and 1 equal. They both are valid when there is only one symbol with the given name. * tag 'livepatching-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching: selftests: livepatch: use canonical ftrace path livepatch: Match old_sympos 0 and 1 in klp_find_func() |
||
|
Linus Torvalds
|
02baaa67d9 |
sched_ext: Changes for v6.19
- Improve recovery from misbehaving BPF schedulers. When a scheduler puts many tasks with varying affinity restrictions on a shared DSQ, CPUs scanning through tasks they cannot run can overwhelm the system, causing lockups. Bypass mode now uses per-CPU DSQs with a load balancer to avoid this, and hooks into the hardlockup detector to attempt recovery. Add scx_cpu0 example scheduler to demonstrate this scenario. - Add lockless peek operation for DSQs to reduce lock contention for schedulers that need to query queue state during load balancing. - Allow scx_bpf_reenqueue_local() to be called from anywhere in preparation for deprecating cpu_acquire/release() callbacks in favor of generic BPF hooks. - Prepare for hierarchical scheduler support: add scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs, make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in structs for future aux__prog parameter. - Implement cgroup_set_idle() callback to notify BPF schedulers when a cgroup's idle state changes. - Fix migration tasks being incorrectly downgraded from stop_sched_class to rt_sched_class across sched_ext enable/disable. Applied late as the fix is low risk and the bug subtle but needs stable backporting. - Various fixes and cleanups including cgroup exit ordering, SCX_KICK_WAIT reliability, and backward compatibility improvements. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaS4h1A4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGe/MAP9EZ0pLiTpmMtt6mI/11Fmi+aWfL84j1zt13cz9 W4vb4gEA9eVEH6n9xyC4nhcOk9AQwSDuCWMOzLsnhW8TbEHVTww= =8W/B -----END PGP SIGNATURE----- Merge tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext Pull sched_ext updates from Tejun Heo: - Improve recovery from misbehaving BPF schedulers. When a scheduler puts many tasks with varying affinity restrictions on a shared DSQ, CPUs scanning through tasks they cannot run can overwhelm the system, causing lockups. Bypass mode now uses per-CPU DSQs with a load balancer to avoid this, and hooks into the hardlockup detector to attempt recovery. Add scx_cpu0 example scheduler to demonstrate this scenario. - Add lockless peek operation for DSQs to reduce lock contention for schedulers that need to query queue state during load balancing. - Allow scx_bpf_reenqueue_local() to be called from anywhere in preparation for deprecating cpu_acquire/release() callbacks in favor of generic BPF hooks. - Prepare for hierarchical scheduler support: add scx_bpf_task_set_slice() and scx_bpf_task_set_dsq_vtime() kfuncs, make scx_bpf_dsq_insert*() return bool, and wrap kfunc args in structs for future aux__prog parameter. - Implement cgroup_set_idle() callback to notify BPF schedulers when a cgroup's idle state changes. - Fix migration tasks being incorrectly downgraded from stop_sched_class to rt_sched_class across sched_ext enable/disable. Applied late as the fix is low risk and the bug subtle but needs stable backporting. - Various fixes and cleanups including cgroup exit ordering, SCX_KICK_WAIT reliability, and backward compatibility improvements. * tag 'sched_ext-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (44 commits) sched_ext: Fix incorrect sched_class settings for per-cpu migration tasks sched_ext: tools: Removing duplicate targets during non-cross compilation sched_ext: Use kvfree_rcu() to release per-cpu ksyncs object sched_ext: Pass locked CPU parameter to scx_hardlockup() and add docs sched_ext: Update comments replacing breather with aborting mechanism sched_ext: Implement load balancer for bypass mode sched_ext: Factor out abbreviated dispatch dequeue into dispatch_dequeue_locked() sched_ext: Factor out scx_dsq_list_node cursor initialization into INIT_DSQ_LIST_CURSOR sched_ext: Add scx_cpu0 example scheduler sched_ext: Hook up hardlockup detector sched_ext: Make handle_lockup() propagate scx_verror() result sched_ext: Refactor lockup handlers into handle_lockup() sched_ext: Make scx_exit() and scx_vexit() return bool sched_ext: Exit dispatch and move operations immediately when aborting sched_ext: Simplify breather mechanism with scx_aborting flag sched_ext: Use per-CPU DSQs instead of per-node global DSQs in bypass mode sched_ext: Refactor do_enqueue_task() local and global DSQ paths sched_ext: Use shorter slice in bypass mode sched_ext: Mark racy bitfields to prevent adding fields that can't tolerate races sched_ext: Minor cleanups to scx_task_iter ... |
||
|
Linus Torvalds
|
8449d3252c |
cgroup: Changes for v6.19
- Defer task cgroup unlink until after the dying task's final context switch so that controllers see the cgroup properly populated until the task is truly gone. - cpuset cleanups and simplifications. Enforce that domain isolated CPUs stay in root or isolated partitions and fail if isolated+nohz_full would leave no housekeeping CPU. Fix sched/deadline root domain handling during CPU hot-unplug and race for tasks in attaching cpusets. - Misc fixes including memory reclaim protection documentation and selftest KTAP conformance. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaS3pEQ4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGYbrAP9H0kVyWH5tK9VhjSZyqidic8NuvtmNOyhIRrg0 8S8K0wD/YG9xlh2JUyRmS4B23ggc59+9y5xM2/sctrho51Pvsgg= =0MB+ -----END PGP SIGNATURE----- Merge tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup updates from Tejun Heo: - Defer task cgroup unlink until after the dying task's final context switch so that controllers see the cgroup properly populated until the task is truly gone - cpuset cleanups and simplifications. Enforce that domain isolated CPUs stay in root or isolated partitions and fail if isolated+nohz_full would leave no housekeeping CPU. Fix sched/deadline root domain handling during CPU hot-unplug and race for tasks in attaching cpusets - Misc fixes including memory reclaim protection documentation and selftest KTAP conformance * tag 'cgroup-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (21 commits) cpuset: Treat cpusets in attaching as populated sched/deadline: Walk up cpuset hierarchy to decide root domain when hot-unplug cgroup/cpuset: Introduce cpuset_cpus_allowed_locked() docs: cgroup: No special handling of unpopulated memcgs docs: cgroup: Note about sibling relative reclaim protection docs: cgroup: Explain reclaim protection target selftests/cgroup: conform test to KTAP format output cpuset: remove need_rebuild_sched_domains cpuset: remove global remote_children list cpuset: simplify node setting on error cgroup: include missing header for struct irq_work cgroup: Fix sleeping from invalid context warning on PREEMPT_RT cgroup/cpuset: Globally track isolated_cpus update cgroup/cpuset: Ensure domain isolated CPUs stay in root or isolated partition cgroup/cpuset: Move up prstate_housekeeping_conflict() helper cgroup/cpuset: Fail if isolated and nohz_full don't leave any housekeeping cgroup/cpuset: Rename update_unbound_workqueue_cpumask() to update_isolation_cpumasks() cgroup: Defer task cgroup unlink until after the task is done switching out cgroup: Move dying_tasks cleanup from cgroup_task_release() to cgroup_task_free() cgroup: Rename cgroup lifecycle hooks to cgroup_task_*() ... |
||
|
Linus Torvalds
|
2b60145734 |
workqueue: Changes for v6.19
- Rescuer affinity management: Affinity now updated only when detached using wq_unbound_cpumask consistently. DISASSOCIATED workers also follow unbound cpumask changes to avoid breaking CPU isolation. - Rescuer cleanups preparing for fetching work items one by one from pool list: Work assignment factored out, optimized to skip pwqs no longer needing rescue, and shutdown logic simplified. - Unused assert_rcu_or_wq_mutex_or_pool_mutex() removed. -----BEGIN PGP SIGNATURE----- iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaS3kYg4cdGpAa2VybmVs Lm9yZwAKCRCxYfJx3gVYGWkwAQC6zcYAbGTcEkfiDsg3GM6dCsHDk3hIXVguE7Em mOpnVQD/QxiYHZxt/SOY5LIIX9ZvTpBYeuW7MR5bCncSBdCLTw4= =VkvX -----END PGP SIGNATURE----- Merge tag 'wq-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue updates from Tejun Heo: - Rescuer affinity management: Affinity is now updated only when detached using wq_unbound_cpumask consistently. DISASSOCIATED workers also follow unbound cpumask changes to avoid breaking CPU isolation - Rescuer cleanups preparing for fetching work items one by one from pool list: Work assignment factored out, optimized to skip pwqs no longer needing rescue, and shutdown logic simplified - Unused assert_rcu_or_wq_mutex_or_pool_mutex() removed * tag 'wq-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Don't rely on wq->rescuer to stop rescuer workqueue: Only assign rescuer work when really needed workqueue: Factor out assign_rescuer_work() workqueue: Init rescuer's affinities as wq_unbound_cpumask workqueue: Let DISASSOCIATED workers follow unbound wq cpumask changes workqueue: Update the rescuer's affinity only when it is detached workqueue: Remove unused assert_rcu_or_wq_mutex_or_pool_mutex |
||
|
Linus Torvalds
|
4d38b88fd1 |
printk changes for 6.19
-----BEGIN PGP SIGNATURE-----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=FnfO
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
|
||
|
Linus Torvalds
|
4a4e019937 |
lkmm: Update documentation
Changes ------- * Sort the memory-barriers.txt file's wait_event* and wait_on_bit* list alphabetically. -----BEGIN PGP SIGNATURE----- iQJHBAABCgAxFiEEbK7UrM+RBIrCoViJnr8S83LZ+4wFAmktwu8THHBhdWxtY2tA a2VybmVsLm9yZwAKCRCevxLzctn7jEvKD/919GXHqRiUeDSXGySi/q8oCPLFEJcJ f2y0NAR5C7A0oHTs91aBJ8rmszMzqzKKYvOiwlS4UMRVzUP1uI1T1bPsoY1FJNZN B4U6BThyhgOR5bSzEkbXIwaF2Vil4IqDXP2pPgab7IHs2XK6Iei3OzlGcezgK/IB XRG2d7Zb4OAchuaxt9kZzM7Yl55++ksBWE14TERjpi2co8QzQVaZPRB2gr18x2+C T7nh7x0pg8hYKRrWHHB9jcjoQId4S6B/5iWCWSMv2Yt/mk0QYEXn7pa1CrUoRLuX RJVOlObT4ruiE4hShjDmq9wgHph8aqrO5O2L6i5U0LKUINMkpvvtWtWKSJhmBaoF NsaGChne9GZdFeQk3lzWlA6DPrr4JlBkI8WqOiQ2N8S4xv/Bh5XW3Z61vICG8itd IOsGaRnTF3qoZBBz6u/LxF6vbR4hNK4D86PM/Fjv2vv8bfqKaM4WDSdGWkPRh/Yt JD1xsuO7qkFIYwJmFM7MBvjICrK1Fp7zVcmLIWgxW9TBp/BYSsLC3KX/GHiBPUY9 kGhxqynFIKdMNVrAU2DMj9mPCvefYPDj8CSYKTuW+HD9xlk2Raz5hRmS/OvAlktt NtcYN1xrhBy/pEi0Jo22tdeUMWeHF5EvmJFJLrKrSQJi+MMNkwkif8zeiMhCGfOm mvch0DBkUmD2sw== =wByu -----END PGP SIGNATURE----- Merge tag 'lkmm.2025.12.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull lkmm documentation update from Paul McKenney: - Sort the memory-barriers.txt file's wait_event* and wait_on_bit* list alphabetically * tag 'lkmm.2025.12.01a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: memory-barriers.txt: Sort wait_event* and wait_on_bit* list alphabetically |
||
|
Linus Torvalds
|
98e7dcbb82 |
RCU pull request for v6.19
SRCU
----
_ Properly handle SRCU readers within IRQ disabled sections in tiny SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture.
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write side
(using full RCU grace period ordering instead of simply full
ordering) as compared to "traditional" non-fast SRCU. But those
srcu-fast flavours are going to be optimized in two different
ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next cycle.
Only the new interfaces are added for now, along with related
torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering) without
waiting for the read side to tell which to use. Also this optimizes
the read side altogether with moving flavour debug checks under debug
config and with removing a costly RmW operation on their first call.
- Make some diagnostic functions tracing safe.
REFSCALE
-------
Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code.
MISCELLANOUS
------
- In order to prepare the layout for nohz_full work deferral to
user exit, the context tracking state must shrink the counter
of transitions to/from RCU not watching. The only possible hazard
is to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption.
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN warnings.
On recent discussions, we also concluded that all those WRITE_ONCE()
and READ_ONCE() on list APIs deserve appropriate comments. Something
to be expected for the next cycle.
- Provide a script to apply several configs to several commits with torture.
- Allow torture to reuse a build directory in order to save needless
rebuild time.
- Various cleanups.
-----BEGIN PGP SIGNATURE-----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=XnUt
-----END PGP SIGNATURE-----
Merge tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Frederic Weisbecker:
"SRCU:
- Properly handle SRCU readers within IRQ disabled sections in tiny
SRCU
- Preparation to reimplement RCU Tasks Trace on top of SRCU fast:
- Introduce API to expedite a grace period and test it through
rcutorture
- Split srcu-fast in two flavours: SRCU-fast and SRCU-fast-updown.
Both are still targeted toward faster readers (without full
barriers on LOCK and UNLOCK) at the expense of heavier write
side (using full RCU grace period ordering instead of simply
full ordering) as compared to "traditional" non-fast SRCU. But
those srcu-fast flavours are going to be optimized in two
different ways:
- SRCU-fast will become the reimplementation basis for
RCU-TASK-TRACE for consolidation. Since RCU-TASK-TRACE must
be NMI safe, SRCU-fast must be as well.
- SRCU-fast-updown will be needed for uretprobes code in order
to get rid of the read-side memory barriers while still
allowing entering the reader at task level while exiting it
in a timer handler. It is considered semaphore-like in that
it can have different owners between LOCK and UNLOCK.
However it is not NMI-safe.
The actual optimizations are work in progress for the next
cycle. Only the new interfaces are added for now, along with
related torture and scalability test code.
- Create/document/debug/torture new proper initializers for RCU fast:
DEFINE_SRCU_FAST() and init_srcu_struct_fast()
This allows for using right away the proper ordering on the write
side (either full ordering or full RCU grace period ordering)
without waiting for the read side to tell which to use.
This also optimizes the read side altogether with moving flavour
debug checks under debug config and with removing a costly RmW
operation on their first call.
- Make some diagnostic functions tracing safe
Refscale:
- Add performance testing for common context synchronizations
(Preemption, IRQ, Softirq) and per-cpu increments. Those are
relevant comparisons against SRCU-fast read side APIs, especially
as they are planned to synchronize further tracing fast-path code
Miscellanous:
- In order to prepare the layout for nohz_full work deferral to user
exit, the context tracking state must shrink the counter of
transitions to/from RCU not watching. The only possible hazard is
to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN
warnings. On recent discussions, we also concluded that all those
WRITE_ONCE() and READ_ONCE() on list APIs deserve appropriate
comments. Something to be expected for the next cycle
- Provide a script to apply several configs to several commits with
torture
- Allow torture to reuse a build directory in order to save needless
rebuild time
- Various cleanups"
* tag 'rcu.release.v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (29 commits)
refscale: Add SRCU-fast-updown readers
refscale: Exercise DEFINE_STATIC_SRCU_FAST() and init_srcu_struct_fast()
rcutorture: Make srcu{,d}_torture_init() announce the SRCU type
srcu: Create an SRCU-fast-updown API
refscale: Do not disable interrupts for tests involving local_bh_enable()
refscale: Add non-atomic per-CPU increment readers
refscale: Add this_cpu_inc() readers
refscale: Add preempt_disable() readers
refscale: Add local_bh_disable() readers
refscale: Add local_irq_disable() and local_irq_save() readers
torture: Permit negative kvm.sh --kconfig numberic arguments
srcu: Add SRCU_READ_FLAVOR_FAST_UPDOWN CPP macro
rcu: Mark diagnostic functions as notrace
rcutorture: Make TREE04 use CONFIG_RCU_DYNTICKS_TORTURE
rcutorture: Remove redundant rcutorture_one_extend() from rcu_torture_one_read()
rcutorture: Permit kvm-again.sh to re-use the build directory
torture: Add kvm-series.sh to test commit/scenario combination
rcu: use WRITE_ONCE() for ->next and ->pprev of hlist_nulls
locktorture: Fix memory leak in param_set_cpumask()
doc: Update for SRCU-fast definitions and initialization
...
|
||
|
Linus Torvalds
|
b687034b1a |
slab updates for 6.19
-----BEGIN PGP SIGNATURE-----
iQFPBAABCAA5FiEEe7vIQRWZI0iWSE3xu+CwddJFiJoFAmksibgbFIAAAAAABAAO
bWFudTIsMi41KzEuMTEsMiwyAAoJELvgsHXSRYiavR8H/jTNKlb8jZtre1Q2xIGJ
PgU8+fc4PGX8C6XuKRgb4KYL+zn3VSnTyxLUc3ObKIRTrGOJOBw3YT8R0LvrMOJx
Ibx/6o0o+vjnDxmq6QGcuYdytDdL/rL6Gh8PR1dyWAqPz6jGtraP0nCJu7Y9jRZ0
JHbyRTfpC8I6fTZv/WHocTsUDUu/+M4jQx3kMAMgSSTc7IAF+El5GqhpwEaWv7u/
6D0px1lXI3rGimzmHeLy+CEjW041MTkxPH3GNzkiZwi2WUwI+ZEteMcs29KHcCOe
/sdqmlzn2CPxzqG3TkJ4LbJE3XThYkqxe56LmBVJnhHFe+vCF8urEX9UUTtMn1dh
3zs=
=iQ4N
-----END PGP SIGNATURE-----
Merge tag 'slab-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab
Pull slab updates from Vlastimil Babka:
- mempool_alloc_bulk() support for upcoming users in the block layer
that need to allocate multiple objects at once with the mempool's
guaranteed progress semantics, which is not achievable with an
allocation single objects in a loop. Along with refactoring and
various improvements (Christoph Hellwig)
- Preparations for the upcoming separation of struct slab from struct
page, mostly by removing the struct folio layer, as the purpose of
struct folio has shifted since it became used in slab code (Matthew
Wilcox)
- Modernisation of slab's boot param API usage, which removes some
unexpected parsing corner cases (Petr Tesarik)
- Refactoring of freelist_aba_t (now struct freelist_counters) and
associated functions for double cmpxchg, enabled by -fms-extensions
(Vlastimil Babka)
- Cleanups and improvements related to sheaves caching layer, that were
part of the full conversion to sheaves, which is planned for the next
release (Vlastimil Babka)
* tag 'slab-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (42 commits)
slab: Remove unnecessary call to compound_head() in alloc_from_pcs()
mempool: clarify behavior of mempool_alloc_preallocated()
mempool: drop the file name in the top of file comment
mempool: de-typedef
mempool: remove mempool_{init,create}_kvmalloc_pool
mempool: legitimize the io_schedule_timeout in mempool_alloc_from_pool
mempool: add mempool_{alloc,free}_bulk
mempool: factor out a mempool_alloc_from_pool helper
slab: Remove references to folios from virt_to_slab()
kasan: Remove references to folio in __kasan_mempool_poison_object()
memcg: Convert mem_cgroup_from_obj_folio() to mem_cgroup_from_obj_slab()
mempool: factor out a mempool_adjust_gfp helper
mempool: add error injection support
mempool: improve kerneldoc comments
mm: improve kerneldoc comments for __alloc_pages_bulk
fault-inject: make enum fault_flags available unconditionally
usercopy: Remove folio references from check_heap_object()
slab: Remove folio references from kfree_nolock()
slab: Remove folio references from kfree_rcu_sheaf()
slab: Remove folio references from build_detached_freelist()
...
|
||
|
Linus Torvalds
|
f96163865a |
This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules that
are imported by multiple programs. These modules have been pulled
together under tools/lib/python/ -- at least, for documentation-related
programs. There is other Python code in the tree that might eventually
want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer used by
default, and nobody has missed it, least of all anybody who actually had
to look at it.
- The docs build was controlled by a complex mess of makefilese that few
dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will be far
easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an end to
the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmkuHzEACgkQF0NaE2wM
flgiqAf/aFUA3zCMvOSjbOpX8EO/4rs0ISkhhb01rLSMsRs3P+v9SlGVJls734BE
0ZvVmBo0p7mNakZD4tFCryFn8Gntn28smCEmpDu/FRDMOEcXFUqxQ9st9OhRlar2
tETdFIKIF+yncFJ83Mjr7F5Yeqg38m82g5JdTxvh6FmvDhPLiSXDEeBV2L7hU+St
EX8D8KOZH74XM8LMr8eg3GbUXx72A7WELndlF7DfGIAC8rFC3C9wa0CUSx8wz2Zh
CoCOYsrmd7WdB+c30SUmQbtYLVyWraiqVQVUlCdZDeYPBT/mTo6zJI5L0WxgXuHz
6o+fQdfLA7zlMHTelVcM6y4Qwkmayg==
=1TPY
-----END PGP SIGNATURE-----
Merge tag 'docs-6.19' of git://git.lwn.net/linux
Pull documentation updates from Jonathan Corbet:
"This has been another busy cycle for documentation, with a lot of
build-system thrashing. That work should slow down from here on out.
- The various scripts and tools for documentation were spread out in
several directories; now they are (almost) all coalesced under
tools/docs/. The holdout is the kernel-doc script, which cannot be
easily moved without some further thought.
- As the amount of Python code increases, we are accumulating modules
that are imported by multiple programs. These modules have been
pulled together under tools/lib/python/ -- at least, for
documentation-related programs. There is other Python code in the
tree that might eventually want to move toward this organization.
- The Perl kernel-doc.pl script has been removed. It is no longer
used by default, and nobody has missed it, least of all anybody who
actually had to look at it.
- The docs build was controlled by a complex mess of makefilese that
few dared to touch. Mauro has moved that logic into a new program
(tools/docs/sphinx-build-wrapper) that, with any luck at all, will
be far easier to understand and maintain.
- The get_feat.pl program, used to access information under
Documentation/features/, has been rewritten in Python, bringing an
end to the use of Perl in the docs subsystem.
- The top-level README file has been reorganized into a more
reader-friendly presentation.
- A lot of Chinese translation additions
- Typo fixes and documentation updates as usual"
* tag 'docs-6.19' of git://git.lwn.net/linux: (164 commits)
docs: makefile: move rustdoc check to the build wrapper
README: restructure with role-based documentation and guidelines
docs: kdoc: various fixes for grammar, spelling, punctuation
docs: kdoc_parser: use '@' for Excess enum value
docs: submitting-patches: Clarify that removal of Acks needs explanation too
docs: kdoc_parser: add data/function attributes to ignore
docs: MAINTAINERS: update Mauro's files/paths
docs/zh_CN: Add wd719x.rst translation
docs/zh_CN: Add libsas.rst translation
get_feat.pl: remove it, as it got replaced by get_feat.py
Documentation/sphinx/kernel_feat.py: use class directly
tools/docs/get_feat.py: convert get_feat.pl to Python
Documentation/admin-guide: fix typo and comment in cscope example
docs/zh_CN: Add data-integrity.rst translation
docs/zh_CN: Add blk-mq.rst translation
docs/zh_CN: Add block/index.rst translation
docs/zh_CN: Update the Chinese translation of kbuild.rst
docs: bring some order to our Python module hierarchy
docs: Move the python libraries to tools/lib/python
Documentation/kernel-parameters: Move the kernel build options
...
|
||
|
Linus Torvalds
|
a619fe35ab |
This update includes the following changes:
API: - Rewrite memcpy_sglist from scratch. - Add on-stack AEAD request allocation. - Fix partial block processing in ahash. Algorithms: - Remove ansi_cprng. - Remove tcrypt tests for poly1305. - Fix EINPROGRESS processing in authenc. - Fix double-free in zstd. Drivers: - Use drbg ctr helper when reseeding xilinx-trng. - Add support for PCI device 0x115A to ccp. - Add support of paes in caam. - Add support for aes-xts in dthev2. Others: - Use likely in rhashtable lookup. - Fix lockdep false-positive in padata by removing a helper. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEn51F/lCuNhUwmDeSxycdCkmxi6cFAmktaHwACgkQxycdCkmx i6duthAAl4ZjsuSgt0P9ZPJXWgSH+QbNT/6fL1QzLEuzLVGn8Mt99LTQpaYU8HRh fced8+R7UpqA/FgZTYbRKopZJVJJqhmTf2zqjbe47CroRm2Wf5UO+6ZXBsiqbMwa 6fNLilhcrq5G3DrIHepCpIQ7NM2+ucTMnPRIWP3cvzLwX0JzPtYIpYUSiVPAtkjh 9g24oPz6LR/xZfyk+wPbHOSYeqz4sSXnGJkL+Vn33AtU5KJZLum9zMP4Lleim7HP XaNnUL/S/PYCspycrvfrnq6+YMLPw2USguttuZe0Dg0qhq/jPMyzdEkTAjcTD5LG NZavVUbQsf6BW+YjXgaE/ybcSs6WR3ySs8aza1Ev8QqsmpbJj9xdpF9fn4RsffGR mbhc5plJCKWzfiaparea8yY9n5vHwbOK4zoyF9P6kI5ykkoA+GmwRwTW73M9KCfa i1R6g97O+t4Yaq9JI9GG7dkm9bxJpY+XaKouW7rqv/MX0iND1ExDYaqdcA+Xa61c TNfdlVcGyX7Dolm2xnpvRv8EqF9NzeK4Vw1QslrdCijXfe7eJymabNKhLBlV4li0 tVfmh4vyQFgruyiR7r7AkXIKzsLZbji030UoOsQqiMW7ualBUQ0dCDbBa8J6kUcX /vjbSmxV3LKgVgYvUBRRGIi9CJbKfs29RkS6RFtdqcq/YT4KsJU= =DHes -----END PGP SIGNATURE----- Merge tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Rewrite memcpy_sglist from scratch - Add on-stack AEAD request allocation - Fix partial block processing in ahash Algorithms: - Remove ansi_cprng - Remove tcrypt tests for poly1305 - Fix EINPROGRESS processing in authenc - Fix double-free in zstd Drivers: - Use drbg ctr helper when reseeding xilinx-trng - Add support for PCI device 0x115A to ccp - Add support of paes in caam - Add support for aes-xts in dthev2 Others: - Use likely in rhashtable lookup - Fix lockdep false-positive in padata by removing a helper" * tag 'v6.19-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (71 commits) crypto: zstd - fix double-free in per-CPU stream cleanup crypto: ahash - Zero positive err value in ahash_update_finish crypto: ahash - Fix crypto_ahash_import with partial block data crypto: lib/mpi - use min() instead of min_t() crypto: ccp - use min() instead of min_t() hwrng: core - use min3() instead of nested min_t() crypto: aesni - ctr_crypt() use min() instead of min_t() crypto: drbg - Delete unused ctx from struct sdesc crypto: testmgr - Add missing DES weak and semi-weak key tests Revert "crypto: scatterwalk - Move skcipher walk and use it for memcpy_sglist" crypto: scatterwalk - Fix memcpy_sglist() to always succeed crypto: iaa - Request to add Kanchana P Sridhar to Maintainers. crypto: tcrypt - Remove unused poly1305 support crypto: ansi_cprng - Remove unused ansi_cprng algorithm crypto: asymmetric_keys - fix uninitialized pointers with free attribute KEYS: Avoid -Wflex-array-member-not-at-end warning crypto: ccree - Correctly handle return of sg_nents_for_len crypto: starfive - Correctly handle return of sg_nents_for_len crypto: iaa - Fix incorrect return value in save_iaa_wq() crypto: zstd - Remove unnecessary size_t cast ... |
||
|
Linus Torvalds
|
c832183148 |
ipe/stable-6.19 PR 20251202
-----BEGIN PGP SIGNATURE----- iIcEABYIAC8WIQQzmBmZPBN6m/hUJmnyomI6a/yO7QUCaS+zQhEcd3VmYW5Aa2Vy bmVsLm9yZwAKCRDyomI6a/yO7TfdAP4ngYyNKMwefqmrwG7akL9sRCWEH4Y/ZM/Z ZwFw0waDkAEA5gV5LH6DJme9rBsXjC8wkOiiUOerqopIVKPMeYKCmAc= =sOI5 -----END PGP SIGNATURE----- Merge tag 'ipe-pr-20251202' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe Pull IPE udates from Fan Wu: "The primary change is the addition of support for the AT_EXECVE_CHECK flag. This allows interpreters to signal the kernel to perform IPE security checks on script files before execution, extending IPE enforcement to indirectly executed scripts. Update documentation for it, and also fix a comment" * tag 'ipe-pr-20251202' of git://git.kernel.org/pub/scm/linux/kernel/git/wufan/ipe: ipe: Update documentation for script enforcement ipe: Add AT_EXECVE_CHECK support for script enforcement ipe: Drop a duplicated CONFIG_ prefix in the ifdeffery |
||
|
Linus Torvalds
|
777f817160 |
integrity-v6.19
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCaS896BQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5RDuAQDx4fmvctP8kc9PeRjd5X/UV1ip1pPD
beMKt8ghEThQiAEAzjFJbNGUDKhfR8yWODifAvYRurU5YQJZZI9wJ8skNw0=
=3Vc4
-----END PGP SIGNATURE-----
Merge tag 'integrity-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Bug fixes:
- defer credentials checking from the bprm_check_security hook to the
bprm_creds_from_file security hook
- properly ignore IMA policy rules based on undefined SELinux labels
IMA policy rule extensions:
- extend IMA to limit including file hashes in the audit logs
(dont_audit action)
- define a new filesystem subtype policy option (fs_subtype)
Misc:
- extend IMA to support in-kernel module decompression by deferring
the IMA signature verification in kernel_read_file() to after the
kernel module is decompressed"
* tag 'integrity-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Handle error code returned by ima_filter_rule_match()
ima: Access decompressed kernel module to verify appended signature
ima: add fs_subtype condition for distinguishing FUSE instances
ima: add dont_audit action to suppress audit actions
ima: Attach CREDS_CHECK IMA hook to bprm_creds_from_file LSM hook
|
||
|
Linus Torvalds
|
204a920f28 |
Patches for 6.19
-----BEGIN PGP SIGNATURE----- iQJLBAABCAA1FiEEC+9tH1YyUwIQzUIeOKUVfIxDyBEFAmkp4M4XHGNhc2V5QHNj aGF1Zmxlci1jYS5jb20ACgkQOKUVfIxDyBFc+BAAq564RJ19Nj7WxV3juDGYLyWR b2P2w4euHo1PvWng058G3WnCzzS14xj6xShLJL711jbuue40lngBqllP+djHIdGM /Mq4I7BnVSJ4z2svvovebiQLoaCiSHN4Uo/b8cdYRz6scueyOQdJUXZvyLwVb4fY CxzfXbcXzsS8MEZikSqyVrjdEZ8yLKzL+uJEqm9FU/suaTUuMNeXudZaXHv5sa8H wxd5iFQhNe2NYCN0EV8Pz57q36ewvzC6UhZLIM+NlIXorfBFWEq54pYpa9OOnNNW 4S+e4KWcNqcWtjxJbzh80Fyui3xv2/b1S73/0Akcf+yqp1mZjPLKZtmsFn83F9b3 SxXGqHNUIZ79U6f656nDYSYYuXzAKkqzmGC94aj7AjABBXNRejPASXqsLLAtm+KY qwqcM2W6WwG1ILEixj5UpfC7qpsBVPYGf5cOi9iPlZD2+/l7OgPOTxNDAe7M5m+E M30eJCqObdl1Uw7QlHvMG5VQT9XkwJFL93OEOADqvE1GqTphIwMb4vJmGuYe/Sgg xqEWMLA6hKBP/B8eQvA7d02WLvzvegwB7C5RTWv1M+QGyzlNxTwqOv+vecm//IVS A3LzfxjadSYyRm9nNbZrYWqdVpvYhVcxHrLwzJ4jBsPjBSZM9QlbJHaCjs/T9Sg5 pK0p5GsXIr3akV2BIvE= =n/1b -----END PGP SIGNATURE----- Merge tag 'Smack-for-6.19' of https://github.com/cschaufler/smack-next Pull smack updates from Casey Schaufler: - fix several cases where labels were treated inconsistently when imported from user space - clean up the assignment of extended attributes - documentation improvements * tag 'Smack-for-6.19' of https://github.com/cschaufler/smack-next: Smack: function parameter 'gfp' not described smack: fix kernel-doc warnings for smk_import_valid_label() smack: fix bug: setting task label silently ignores input garbage smack: fix bug: unprivileged task can create labels smack: fix bug: invalid label of unix socket file smack: always "instantiate" inode in smack_inode_init_security() smack: deduplicate xattr setting in smack_inode_init_security() smack: fix bug: SMACK64TRANSMUTE set on non-directory smack: deduplicate "does access rule request transmutation" |
||
|
Linus Torvalds
|
0eae3283c3 |
audit/stable-6.19 PR 20251201
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmkuAIcUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXMWlhAAgydMY1/oYPKbP3xdJTPJU6uc4GLk o1lRaO59FkwogA2iupU6rltKiqhPYH7lIzebMcOuRLzaHpO0sGk0anyCMjNW2Agl P/Zu+xkF+uGnzpO3gpaOLYFbCkpT98hNbyZu33l6ftxr37+S+DWHuThUhmOnxcgQ z7Kguq0jaruiW8oc219HjNI/VCWW0F1W/+PVjFUSZogty2K2UttsabZQFMJ8MHg6 9C2jP/f+tN2KD55u7oEA5QiucC/8BdNdyLGke4TvjhG38FG4bh71Q59LknHa5yMa 6+NeftpE76+Inb8e+ze7iNv1InRccBXurm0p6lZ/lU5nYrjRT245CleQ7nq9ppD1 hyhuGQP/fvvYExKdTl1VWXA0zGLb6+1rIn6f//MpDSbXShGj/5vK82Qo/ug1ZEGH QEAr6g2/S6xgudl2ui5OHSDb87nDWxzNo1t9TxGPBoQ6TG3ryPcm1ccTB0tb59+3 Poej26MOuZUrTpiQl3SLnfwjN0WnkiqGX5y/Cjh9tHFVk2OzOe/VqImZk9oeFgxt O+IEB2cUO/U0D/3tdECqiRVS/RFe3jSn/qYCzP9fQaLhD0IpqlhfJ5TXbWiQam8Y vGjNCx17a7mwvfxCIofEANw0wu3ooajq68UjRVhTpoKka0USKvktAoFirAB8r54I oNSBfWKl4polguo= =3hKh -----END PGP SIGNATURE----- Merge tag 'audit-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit updates from Paul Moore: - Consolidate the loops in __audit_inode_child() to improve performance When logging a child inode in __audit_inode_child(), we first run through the list of recorded inodes looking for the parent and then we repeat the search looking for a matching child entry. This pull request consolidates both searches into one pass through the recorded inodes, resuling in approximately a 50% reduction in audit overhead. See the commit description for the testing details. - Combine kmalloc()/memset() into kzalloc() in audit_krule_to_data() - Comment fixes * tag 'audit-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: merge loops in __audit_inode_child() audit: Use kzalloc() instead of kmalloc()/memset() in audit_krule_to_data() audit: fix comment misindentation in audit.h |
||
|
Linus Torvalds
|
51e3b98d73 |
selinux/stable-6.19 PR 20251201
-----BEGIN PGP SIGNATURE----- iQJIBAABCgAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmkuAKEUHHBhdWxAcGF1 bC1tb29yZS5jb20ACgkQ6iDy2pc3iXPKeA/8DSW+sTkQ9BMGGnyuH1uU/r84qtVh Ft6pnIPzrogE/GKcQeFgFA9D7gQbB8J39PSxZLS3lp0UiuPCuq+D09L+uzDKzDCD Avfe84dwsI5OiplPKyHiG3bF9W2+A1zkwH2j+5uC6yF8v9J9vglo4u5vAYeE2wxA X4b2r9jMm7WJ/KFNiSiiLGEhOSjVVUrJULcmWMRPPruplPDC4dLnqYTWTbkrfF8h /oXv/+ssqbj6FqfL4WaRnjN8GgZcwaWy1qu9LVlZ40iphpbVAyPBJPLJS6Q4hhOl mMHUbYkxALPyW7riQxoXAegQjJyGgKn8Bli9U6bkiKFA2yeIhJFX+OyV1SlOAs/J g6s5XfeCzqY0Tw3eqvT1YRhp10GcA7EtBYvhAe5ARq7PkMoqxmiI587piVX9hbos a0AH9CDNoOw+8QXx27sOoD1YIaiYD9fikXKymrzRRaW/GX6i43XIKiELBMuKoIVZ iwualvQiGBLLczzm5rdqPcLgp09Agn4AHfvFWXKFgS4+IJGKjeeXNOjsp9oFEivq RnXmDpa+nBud5zeTSeSpOY2L0pvuIG5N25N6U9bTsDe+4Y6p0qIAUy8e4sQ0PA8P xyp9/fcNr9jwHeLTjDbxZqZ+MU3GLIIVPdl0zq4z2J8nhkW3wD3pQX6B4qPIuXLx YP3nwhAT9T+hU7w= =IvVa -----END PGP SIGNATURE----- Merge tag 'selinux-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux updates from Paul Moore: - Improve the granularity of SELinux labeling for memfd files Currently when creating a memfd file, SELinux treats it the same as any other tmpfs, or hugetlbfs, file. While simple, the drawback is that it is not possible to differentiate between memfd and tmpfs files. This adds a call to the security_inode_init_security_anon() LSM hook and wires up SELinux to provide a set of memfd specific access controls, including the ability to control the execution of memfds. As usual, the commit message has more information. - Improve the SELinux AVC lookup performance Adopt MurmurHash3 for the SELinux AVC hash function instead of the custom hash function currently used. MurmurHash3 is already used for the SELinux access vector table so the impact to the code is minimal, and performance tests have shown improvements in both hash distribution and latency. See the commit message for the performance measurments. - Introduce a Kconfig option for the SELinux AVC bucket/slot size While we have the ability to grow the number of AVC hash buckets today, the size of the buckets (slot size) is fixed at 512. This pull request makes that slot size configurable at build time through a new Kconfig knob, CONFIG_SECURITY_SELINUX_AVC_HASH_BITS. * tag 'selinux-pr-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: improve bucket distribution uniformity of avc_hash() selinux: Move avtab_hash() to a shared location for future reuse selinux: Introduce a new config to make avc cache slot size adjustable memfd,selinux: call security_inode_init_security_anon() |