The usage of the R-Car V4M VIN bindings where merged before the bindings
where approved. At that time the family fallback compatible was not
part of the bindings, add it.
Fixes: 2bb78d9fb7 ("arm64: dts: renesas: r8a779h0: Add video capture nodes")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20240704161620.1425409-7-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
To make it easier to support new R-Car Gen4 SoCs a family fallback
compatible similar to what is used for R-Car Gen2 has been added to the
VIN bindings. Add this fallback to the R-Car V3U DTSI.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V3U for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20240704161620.1425409-4-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
To make it easier to support new R-Car Gen4 SoCs a family fallback
compatible similar to what is used for R-Car Gen2 has been added to the
VIN bindings. Add this fallback to the R-Car V4H DTSI.
There is no functional change, but the addition of the family fallback
in the bindings produces warnings for R-Car V4H for DTS checks if they
are not added.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/20240704161620.1425409-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
DT bindings and binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZtWD0gAKCRCKwlD9ZEnx
cHMJAP9YsD4Okgk86R4m5yNmi9pOTRGOqNax9jXFzQsatAqkfwEAzRdRFw+POjw4
7kTI3sHgb7+h4Jh2VeR+FR3n8x5OfQE=
=V90C
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g057-dt-binding-defs-tag' into renesas-dts-for-v6.12
Renesas RZ/V2H DT Binding Definitions
DT bindings and binding definitions for the Renesas RZ/V2H (R9A09G057)
SoC, shared by driver and DT source files.
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable the Display Unit and link with the HDMI add-on board connected
to the parallel connector on the RZ/G2UL SMARC EVK by using a Device
Tree overlay.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240826101648.176647-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable HDMI audio on the RZ/G2LC SMARC EVK. Set SW 1.5 on the SoM
module to the OFF position to turn on HDMI audio.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240826090803.56176-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/G2L(C) SoC is equipped with the GIC-600. The GICD is 64KiB +
64KiB for the MBI alias (in total 128KiB), and the GICR is 128KiB per
CPU.
Fixes: 68a4552529 ("arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/V2L SoC is equipped with the GIC-600. The GICD is 64KiB + 64KiB
for the MBI alias (in total 128KiB), and the GICR is 128KiB per CPU.
Fixes: 7c2b8198f4 ("arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/G2UL SoC is equipped with the GIC-600. The GICD is 64KiB + 64KiB
for the MBI alias (in total 128KiB), and the GICR is 128KiB per CPU.
Despite the RZ/G2UL SoC being single-core, it has two instances of GICR.
Fixes: cf40c9689e ("arm64: dts: renesas: Add initial DTSI for RZ/G2UL SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/G3S SoC is equipped with the GIC-600. The GICD is 64KiB + 64KiB
for the MBI alias (in total 128KiB), and the GICR is 128KiB per CPU.
Despite the RZ/G3S SoC being single-core, it has two instances of GICR.
Fixes: e20396d65b ("arm64: dts: renesas: Add initial DTSI for RZ/G3S SoC")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/20240730122436.350013-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Move regulator-vbus device node from common to the usbphy-ctrl device node
of the individual SoC dtsi's as it embeds the vbus regulator.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240715140705.334183-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the V4H White Hawk Single board as opposed to the Quad board the
Ethernet TSN is wired up to a PHY (Marvel 88Q2110/QFN40). Wire up the
connection and enable the TSN0.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240701145012.2342868-3-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Enable confirmed-working CAN-FD channels 0 and 1 on the Gray Hawk Single
development board:
- Channel 0 uses an NXP TJR1443AT CAN transceiver, which must be
enabled through a GPIO,
- Channels 1-3 use Microchip MCP2558FD-H/SN CAN transceivers, which do
not need explicit description, but channels 2-3 do not seem to work.
Inspired by a patch for Gray Hawk in the BSP by Duy Nguyen.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/7c2a06b7abec4ce1025761003ccdbce559789708.1722519717.git.geert+renesas@glider.be
On the RZ/G2UL & RZ/Five SMARC SOMs, the RGMII interface between the SoC
and the Ethernet PHY operates at 1.8V.
The power supply for this interface may be correctly configured in
u-boot, but the kernel should not be relying on this. Now that the
RZ/G2L pinctrl driver supports configuring the Ethernet power supply
voltage, we can simply specify the desired voltage in the device tree.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-10-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the RZ/G2LC SMARC SOM, the RGMII interface between the SoC and the
Ethernet PHY operates at 1.8V.
The power supply for this interface may be correctly configured in
u-boot, but the kernel should not be relying on this. Now that the
RZ/G2L pinctrl driver supports configuring the Ethernet power supply
voltage, we can simply specify the desired voltage in the device tree.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-9-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
On the RZ/G2L & RZ/V2L SMARC SOMs, the RGMII interface between the SoC
and the Ethernet PHY operates at 1.8V.
The power supply for this interface may be correctly configured in
u-boot, but the kernel should not be relying on this. Now that the
RZ/G2L pinctrl driver supports configuring the Ethernet power supply
voltage, we can simply specify the desired voltage in the device tree.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-8-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/G2UL and
RZ/Five SMARC SoMs, as per RGMII specification.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-7-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/G2LC SMARC
SoM, as per RGMII specification.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-6-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/[GV]2L SMARC
SoMs, as per RGMII specification.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-5-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Add device nodes for the PWM timers on the Renesas R-Car V4M (R8A779H0)
SoC.
Signed-off-by: Khanh Le <khanh.le.xr@renesas.com>
[wsa: rebased, dropped TPU part to be upstreamed seperately]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240725194906.14644-11-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
