When xsend() returns -1 (error), the check 'n < sizeof(buf)' incorrectly
treats it as success due to unsigned promotion. Explicitly check for -1
first.
Fixes: a4b7193d8e ("selftests/bpf: Add sockmap test for redirecting partial skb data")
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com>
Link: https://lore.kernel.org/r/20250612084208.27722-1-wangfushuai@baidu.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test case absent_mark_in_the_middle_state is equivalent of the
following C program:
1: r8 = bpf_get_prandom_u32();
2: r6 = -32;
3: bpf_iter_num_new(&fp[-8], 0, 10);
4: if (unlikely(bpf_get_prandom_u32()))
5: r6 = -31;
6: for (;;) {
7: if (!bpf_iter_num_next(&fp[-8]))
8: break;
9: if (unlikely(bpf_get_prandom_u32()))
10: *(u64 *)(fp + r6) = 7;
11: }
12: bpf_iter_num_destroy(&fp[-8]);
13: return 0;
W/o a fix that instructs verifier to ignore branches count for loop
entries verification proceeds as follows:
- 1-4, state is {r6=-32,fp-8=active};
- 6, checkpoint A is created with {r6=-32,fp-8=active};
- 7, checkpoint B is created with {r6=-32,fp-8=active},
push state {r6=-32,fp-8=active} from 7 to 9;
- 8,12,13, {r6=-32,fp-8=drained}, exit;
- pop state with {r6=-32,fp-8=active} from 7 to 9;
- 9, push state {r6=-32,fp-8=active} from 9 to 10;
- 6, checkpoint C is created with {r6=-32,fp-8=active};
- 7, checkpoint A is hit, no precision propagated for r6 to C;
- pop state {r6=-32,fp-8=active} from 9 to 10;
- 10, state is {r6=-31,fp-8=active}, r6 is marked as read and precise,
these marks are propagated to checkpoints A and B (but not C, as
it is not the parent of current state;
- 6, {r6=-31,fp-8=active} checkpoint C is hit, because r6 is not
marked precise for this checkpoint;
- the program is accepted, despite a possibility of unaligned u64
stack access at offset -31.
The test case absent_mark_in_the_middle_state2 is similar except the
following change:
r8 = bpf_get_prandom_u32();
r6 = -32;
bpf_iter_num_new(&fp[-8], 0, 10);
if (unlikely(bpf_get_prandom_u32())) {
r6 = -31;
+ jump_into_loop:
+ goto +0;
+ goto loop;
+ }
+ if (unlikely(bpf_get_prandom_u32()))
+ goto jump_into_loop;
+ loop:
for (;;) {
if (!bpf_iter_num_next(&fp[-8]))
break;
if (unlikely(bpf_get_prandom_u32()))
*(u64 *)(fp + r6) = 7;
}
bpf_iter_num_destroy(&fp[-8])
return 0
The goal is to check that read/precision marks are propagated to
checkpoint created at 'goto +0' that resides outside of the loop.
The test case absent_mark_in_the_middle_state3 is a bit different and
is equivalent to the C program below:
int absent_mark_in_the_middle_state3(void)
{
bpf_iter_num_new(&fp[-8], 0, 10)
loop1(-32, &fp[-8])
loop1_wrapper(&fp[-8])
bpf_iter_num_destroy(&fp[-8])
}
int loop1(num, iter)
{
while (bpf_iter_num_next(iter)) {
if (unlikely(bpf_get_prandom_u32()))
*(fp + num) = 7;
}
return 0
}
int loop1_wrapper(iter)
{
r6 = -32;
if (unlikely(bpf_get_prandom_u32()))
r6 = -31;
loop1(r6, iter);
return 0;
}
The unsafe state is reached in a similar manner, but the loop is
located inside a subprogram that is called from two locations in the
main subprogram. This detail is important for exercising
bpf_scc_visit->backedges memory management.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250611200836.4135542-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent invalid
routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused transient
packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=0mtm
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth and wireless.
Current release - regressions:
- af_unix: allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD
Current release - new code bugs:
- eth: airoha: correct enable mask for RX queues 16-31
- veth: prevent NULL pointer dereference in veth_xdp_rcv when peer
disappears under traffic
- ipv6: move fib6_config_validate() to ip6_route_add(), prevent
invalid routes
Previous releases - regressions:
- phy: phy_caps: don't skip better duplex match on non-exact match
- dsa: b53: fix untagged traffic sent via cpu tagged with VID 0
- Revert "wifi: mwifiex: Fix HT40 bandwidth issue.", it caused
transient packet loss, exact reason not fully understood, yet
Previous releases - always broken:
- net: clear the dst when BPF is changing skb protocol (IPv4 <> IPv6)
- sched: sfq: fix a potential crash on gso_skb handling
- Bluetooth: intel: improve rx buffer posting to avoid causing issues
in the firmware
- eth: intel: i40e: make reset handling robust against multiple
requests
- eth: mlx5: ensure FW pages are always allocated on the local NUMA
node, even when device is configure to 'serve' another node
- wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850,
prevent kernel crashes
- wifi: ath11k: avoid burning CPU in ath11k_debugfs_fw_stats_request()
for 3 sec if fw_stats_done is not set"
* tag 'net-6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (70 commits)
selftests: drv-net: rss_ctx: Add test for ntuple rules targeting default RSS context
net: ethtool: Don't check if RSS context exists in case of context 0
af_unix: Allow passing cred for embryo without SO_PASSCRED/SO_PASSPIDFD.
ipv6: Move fib6_config_validate() to ip6_route_add().
net: drv: netdevsim: don't napi_complete() from netpoll
net/mlx5: HWS, Add error checking to hws_bwc_rule_complex_hash_node_get()
veth: prevent NULL pointer dereference in veth_xdp_rcv
net_sched: remove qdisc_tree_flush_backlog()
net_sched: ets: fix a race in ets_qdisc_change()
net_sched: tbf: fix a race in tbf_change()
net_sched: red: fix a race in __red_change()
net_sched: prio: fix a race in prio_tune()
net_sched: sch_sfq: reject invalid perturb period
net: phy: phy_caps: Don't skip better duplex macth on non-exact match
MAINTAINERS: Update Kuniyuki Iwashima's email address.
selftests: net: add test case for NAT46 looping back dst
net: clear the dst when changing skb protocol
net/mlx5e: Fix number of lanes to UNKNOWN when using data_rate_oper
net/mlx5e: Fix leak of Geneve TLV option object
net/mlx5: HWS, make sure the uplink is the last destination
...
Add test_rss_default_context_rule() to verify that ntuple rules can
correctly direct traffic to the default RSS context (context 0).
The test creates two ntuple rules with explicit location priorities:
- A high-priority rule (loc 0) directing specific port traffic to
context 0.
- A low-priority rule (loc 1) directing all other TCP traffic to context
1.
This validates that:
1. Rules targeting the default context function properly.
2. Traffic steering works as expected when mixing default and
additional RSS contexts.
The test was written by AI, and reviewed by humans.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250612071958.1696361-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the selftests we added this cycle easier to read.
Link: https://lore.kernel.org/20250603-work-coredump-socket-protocol-v2-3-05a5f0c18ecc@kernel.org
Acked-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Fix various warnings in the selftest build.
Link: https://lore.kernel.org/20250603-work-coredump-socket-protocol-v2-2-05a5f0c18ecc@kernel.org
Acked-by: Lennart Poettering <lennart@poettering.net>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Unlike the other cases gup_longterm's memfd tests previously skipped the
test when failing to set up the file descriptor to test. Restore this
behavior to avoid hitting failures when hugetlb isn't configured.
Link: https://lkml.kernel.org/r/20250605-selftest-mm-gup-longterm-tweaks-v1-1-2fae34b05958@kernel.org
Fixes: 66bce7afba ("selftests/mm: fix test result reporting in gup_longterm")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reported-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Closes: https://lkml.kernel.org/r/a76fc252-0fe3-4d4b-a9a1-4a2895c2680d@lucifer.local
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Tested-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Simple test for crash involving multicast loopback and stale dst.
Reuse exising NAT46 program.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610001245.1981782-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit introduces a new vmtest.sh runner for vsock.
It uses virtme-ng/qemu to run tests in a VM. The tests validate G2H,
H2G, and loopback. The testing tools from tools/testing/vsock/ are
reused. Currently, only vsock_test is used.
VMCI and hyperv support is included in the config file to be built with
the -b option, though not used in the tests.
Only tested on x86.
To run:
$ make -C tools/testing/selftests TARGETS=vsock
$ tools/testing/selftests/vsock/vmtest.sh
or
$ make -C tools/testing/selftests TARGETS=vsock run_tests
Example runs (after make -C tools/testing/selftests TARGETS=vsock):
$ ./tools/testing/selftests/vsock/vmtest.sh
1..3
ok 0 vm_server_host_client
ok 1 vm_client_host_server
ok 2 vm_loopback
SUMMARY: PASS=3 SKIP=0 FAIL=0
Log: /tmp/vsock_vmtest_m7DI.log
$ ./tools/testing/selftests/vsock/vmtest.sh vm_loopback
1..1
ok 0 vm_loopback
SUMMARY: PASS=1 SKIP=0 FAIL=0
Log: /tmp/vsock_vmtest_a1IO.log
$ mkdir -p ~/scratch
$ make -C tools/testing/selftests install TARGETS=vsock INSTALL_PATH=~/scratch
[... omitted ...]
$ cd ~/scratch
$ ./run_kselftest.sh
TAP version 13
1..1
# timeout set to 300
# selftests: vsock: vmtest.sh
# 1..3
# ok 0 vm_server_host_client
# ok 1 vm_client_host_server
# ok 2 vm_loopback
# SUMMARY: PASS=3 SKIP=0 FAIL=0
# Log: /tmp/vsock_vmtest_svEl.log
ok 1 selftests: vsock: vmtest.sh
Future work can include vsock_diag_test.
Because vsock requires a VM to test anything other than loopback, this
patch adds vmtest.sh as a kselftest itself. This is different than other
systems that have a "vmtest.sh", where it is used as a utility script to
spin up a VM to run the selftests as a guest (but isn't hooked into
kselftest).
Signed-off-by: Bobby Eshleman <bobbyeshleman@gmail.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250609-vsock-vmtest-v10-1-7f37198e1cd4@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On arm64, the cgroup_mprog_ordering selftest failed with test_progs run
when building with clang compiler. The reason is due to socklen_t optlen
not initialized.
In kernel function do_ip_getsockopt(), we have
if (copy_from_sockptr(&len, optlen, sizeof(int)))
return -EFAULT;
if (len < 0)
return -EINVAL;
The above 'len' variable is a negative value and hence the test failed.
But the test is okay on x86_64. I checked the x86_64 asm code and I didn't
see explicit initialization of 'optlen' but its value is 0 so kernel
didn't return error. This should be a pure luck.
Fix the bug by initializing 'oplen' var properly.
Fixes: e422d5f118 ("selftests/bpf: Add two selftests for mprog API based cgroup progs")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250611162103.1623692-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
-----BEGIN PGP SIGNATURE-----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=OMHL
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #2
- Rework of system register accessors for system registers that are
directly writen to memory, so that sanitisation of the in-memory
value happens at the correct time (after the read, or before the
write). For convenience, RMW-style accessors are also provided.
- Multiple fixes for the so-called "arch-timer-edge-cases' selftest,
which was always broken.
The selftest can reproduce an issue where using bpf_msg_pop_data() in
ktls causes errors on the receiving end.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20250609020910.397930-3-jiayuan.chen@linux.dev
Most of the packetdrill tests have not flaked once last week.
Add the few which did to the XFAIL list.
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250610000001.1970934-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Once the THREADED napi is disabled, the napi kthread should also be
stopped. Keeping the kthread intact after disabling THREADED napi makes
the PID of this kthread show up in the output of netlink 'napi-get' and
ps -ef output.
The is discussed in the patch below:
https://lore.kernel.org/all/20250502191548.559cc416@kernel.org
NAPI kthread should stop only if,
- There are no pending napi poll scheduled for this thread.
- There are no new napi poll scheduled for this thread while it has
stopped.
- The ____napi_schedule can correctly fallback to the softirq for napi
polling.
Since napi_schedule_prep provides mutual exclusion over STATE_SCHED bit,
it is safe to unset the STATE_THREADED when SCHED_THREADED is set or the
SCHED bit is not set. SCHED_THREADED being set means that SCHED is
already set and the kthread owns this napi.
To disable threaded napi, unset STATE_THREADED bit safely if
SCHED_THREADED is set or SCHED is unset. Once STATE_THREADED is unset
safely then wait for the kthread to unset the SCHED_THREADED bit so it
safe to stop the kthread.
Add a new test in nl_netdev to verify this behaviour.
Tested:
./tools/testing/selftests/net/nl_netdev.py
TAP version 13
1..6
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
ok 4 nl_netdev.napi_list_check
ok 5 nl_netdev.dev_set_threaded
ok 6 nl_netdev.nsim_rxq_reset_down
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Ran neper for 300 seconds and did enable/disable of thread napi in a
loop continuously.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250609173015.3851695-1-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the netconsole selftest to validate both basic and extended
target formats. The basic format is a simpler variant that doesn't
support userdata or release functionality.
The test now validates that netconsole works correctly in both
configurations, improving test coverage for different netconsole
deployment scenarios.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-4-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the exit call from validate_result() function and move the
test exit logic to the main script. This allows the function to
be reused in scenarios where the test needs to continue execution
after validation, rather than terminating immediately.
The validate_result() function should focus on validation logic
only, while the calling script maintains control over program
flow and exit conditions. This change improves code modularity
and prepares for potential future enhancements where multiple
validations might be needed in a single test run.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250609-netcons_ext-v3-3-5336fa670326@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
nolibc only supports symbol-based stackprotectors, based on the global
variable __stack_chk_guard. Support for this differs between
architectures and toolchains. Some use the symbol mode by default, some
require a flag to enable it and some don't support it at all.
Before the nolibc test Makefile required the availability of
"-mstack-protector-guard=global" to enable stackprotectors.
While this flag makes sure that the correct mode is available it doesn't
work where the correct mode is the only supported one and therefore the
flag is not implemented.
Switch to a more dynamic probing mechanism.
This correctly enables stack protectors for mips, loongarch and m68k.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250609-nolibc-stackprotector-robust-v1-1-a1cfc92a568a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is based on the gadget from the description of commit 9183671af6db
("bpf: Fix leakage under speculation on mispredicted branches").
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250603212814.338867-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This implements the core of the series and causes the verifier to fall
back to mitigating Spectre v1 using speculation barriers. The approach
was presented at LPC'24 [1] and RAID'24 [2].
If we find any forbidden behavior on a speculative path, we insert a
nospec (e.g., lfence speculation barrier on x86) before the instruction
and stop verifying the path. While verifying a speculative path, we can
furthermore stop verification of that path whenever we encounter a
nospec instruction.
A minimal example program would look as follows:
A = true
B = true
if A goto e
f()
if B goto e
unsafe()
e: exit
There are the following speculative and non-speculative paths
(`cur->speculative` and `speculative` referring to the value of the
push_stack() parameters):
- A = true
- B = true
- if A goto e
- A && !cur->speculative && !speculative
- exit
- !A && !cur->speculative && speculative
- f()
- if B goto e
- B && cur->speculative && !speculative
- exit
- !B && cur->speculative && speculative
- unsafe()
If f() contains any unsafe behavior under Spectre v1 and the unsafe
behavior matches `state->speculative &&
error_recoverable_with_nospec(err)`, do_check() will now add a nospec
before f() instead of rejecting the program:
A = true
B = true
if A goto e
nospec
f()
if B goto e
unsafe()
e: exit
Alternatively, the algorithm also takes advantage of nospec instructions
inserted for other reasons (e.g., Spectre v4). Taking the program above
as an example, speculative path exploration can stop before f() if a
nospec was inserted there because of Spectre v4 sanitization.
In this example, all instructions after the nospec are dead code (and
with the nospec they are also dead code speculatively).
For this, it relies on the fact that speculation barriers generally
prevent all later instructions from executing if the speculation was not
correct:
* On Intel x86_64, lfence acts as full speculation barrier, not only as
a load fence [3]:
An LFENCE instruction or a serializing instruction will ensure that
no later instructions execute, even speculatively, until all prior
instructions complete locally. [...] Inserting an LFENCE instruction
after a bounds check prevents later operations from executing before
the bound check completes.
This was experimentally confirmed in [4].
* On AMD x86_64, lfence is dispatch-serializing [5] (requires MSR
C001_1029[1] to be set if the MSR is supported, this happens in
init_amd()). AMD further specifies "A dispatch serializing instruction
forces the processor to retire the serializing instruction and all
previous instructions before the next instruction is executed" [8]. As
dispatch is not specific to memory loads or branches, lfence therefore
also affects all instructions there. Also, if retiring a branch means
it's PC change becomes architectural (should be), this means any
"wrong" speculation is aborted as required for this series.
* ARM's SB speculation barrier instruction also affects "any instruction
that appears later in the program order than the barrier" [6].
* PowerPC's barrier also affects all subsequent instructions [7]:
[...] executing an ori R31,R31,0 instruction ensures that all
instructions preceding the ori R31,R31,0 instruction have completed
before the ori R31,R31,0 instruction completes, and that no
subsequent instructions are initiated, even out-of-order, until
after the ori R31,R31,0 instruction completes. The ori R31,R31,0
instruction may complete before storage accesses associated with
instructions preceding the ori R31,R31,0 instruction have been
performed
Regarding the example, this implies that `if B goto e` will not execute
before `if A goto e` completes. Once `if A goto e` completes, the CPU
should find that the speculation was wrong and continue with `exit`.
If there is any other path that leads to `if B goto e` (and therefore
`unsafe()`) without going through `if A goto e`, then a nospec will
still be needed there. However, this patch assumes this other path will
be explored separately and therefore be discovered by the verifier even
if the exploration discussed here stops at the nospec.
This patch furthermore has the unfortunate consequence that Spectre v1
mitigations now only support architectures which implement BPF_NOSPEC.
Before this commit, Spectre v1 mitigations prevented exploits by
rejecting the programs on all architectures. Because some JITs do not
implement BPF_NOSPEC, this patch therefore may regress unpriv BPF's
security to a limited extent:
* The regression is limited to systems vulnerable to Spectre v1, have
unprivileged BPF enabled, and do NOT emit insns for BPF_NOSPEC. The
latter is not the case for x86 64- and 32-bit, arm64, and powerpc
64-bit and they are therefore not affected by the regression.
According to commit a6f6a95f25 ("LoongArch, bpf: Fix jit to skip
speculation barrier opcode"), LoongArch is not vulnerable to Spectre
v1 and therefore also not affected by the regression.
* To the best of my knowledge this regression may therefore only affect
MIPS. This is deemed acceptable because unpriv BPF is still disabled
there by default. As stated in a previous commit, BPF_NOSPEC could be
implemented for MIPS based on GCC's speculation_barrier
implementation.
* It is unclear which other architectures (besides x86 64- and 32-bit,
ARM64, PowerPC 64-bit, LoongArch, and MIPS) supported by the kernel
are vulnerable to Spectre v1. Also, it is not clear if barriers are
available on these architectures. Implementing BPF_NOSPEC on these
architectures therefore is non-trivial. Searching GCC and the kernel
for speculation barrier implementations for these architectures
yielded no result.
* If any of those regressed systems is also vulnerable to Spectre v4,
the system was already vulnerable to Spectre v4 attacks based on
unpriv BPF before this patch and the impact is therefore further
limited.
As an alternative to regressing security, one could still reject
programs if the architecture does not emit BPF_NOSPEC (e.g., by removing
the empty BPF_NOSPEC-case from all JITs except for LoongArch where it
appears justified). However, this will cause rejections on these archs
that are likely unfounded in the vast majority of cases.
In the tests, some are now successful where we previously had a
false-positive (i.e., rejection). Change them to reflect where the
nospec should be inserted (using __xlated_unpriv) and modify the error
message if the nospec is able to mitigate a problem that previously
shadowed another problem (in that case __xlated_unpriv does not work,
therefore just add a comment).
Define SPEC_V1 to avoid duplicating this ifdef whenever we check for
nospec insns using __xlated_unpriv, define it here once. This also
improves readability. PowerPC can probably also be added here. However,
omit it for now because the BPF CI currently does not include a test.
Limit it to EPERM, EACCES, and EINVAL (and not everything except for
EFAULT and ENOMEM) as it already has the desired effect for most
real-world programs. Briefly went through all the occurrences of EPERM,
EINVAL, and EACCESS in verifier.c to validate that catching them like
this makes sense.
Thanks to Dustin for their help in checking the vendor documentation.
[1] https://lpc.events/event/18/contributions/1954/ ("Mitigating
Spectre-PHT using Speculation Barriers in Linux eBPF")
[2] https://arxiv.org/pdf/2405.00078 ("VeriFence: Lightweight and
Precise Spectre Defenses for Untrusted Linux Kernel Extensions")
[3] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/runtime-speculative-side-channel-mitigations.html
("Managed Runtime Speculative Execution Side Channel Mitigations")
[4] https://dl.acm.org/doi/pdf/10.1145/3359789.3359837 ("Speculator: a
tool to analyze speculative execution attacks and mitigations" -
Section 4.6 "Stopping Speculative Execution")
[5] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/software-techniques-for-managing-speculation.pdf
("White Paper - SOFTWARE TECHNIQUES FOR MANAGING SPECULATION ON AMD
PROCESSORS - REVISION 5.09.23")
[6] https://developer.arm.com/documentation/ddi0597/2020-12/Base-Instructions/SB--Speculation-Barrier-
("SB - Speculation Barrier - Arm Armv8-A A32/T32 Instruction Set
Architecture (2020-12)")
[7] https://wiki.raptorcs.com/w/images/5/5f/OPF_PowerISA_v3.1C.pdf
("Power ISA™ - Version 3.1C - May 26, 2024 - Section 9.2.1 of Book
III")
[8] https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/programmer-references/40332.pdf
("AMD64 Architecture Programmer’s Manual Volumes 1–5 - Revision 4.08
- April 2024 - 7.6.4 Serializing Instructions")
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Henriette Herzog <henriette.herzog@rub.de>
Cc: Dustin Nguyen <nguyen@cs.fau.de>
Cc: Maximilian Ott <ott@cs.fau.de>
Cc: Milan Stephan <milan.stephan@fau.de>
Link: https://lore.kernel.org/r/20250603212428.338473-1-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A test requires the following to happen:
* CONST_PTR_TO_MAP value is checked for null
* the code in the null branch fails verification
Add test cases:
* direct global map_ptr comparison to null
* lookup inner map, then two checks (the first transforms
map_value_or_null into map_ptr)
* lookup inner map, spill-fill it, then check for null
* use an array of ringbufs to recreate a common coding pattern [1]
[1] https://lore.kernel.org/bpf/CAEf4BzZNU0gX_sQ8k8JaLe1e+Veth3Rk=4x7MDhv=hQxvO8EDw@mail.gmail.com/
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-4-isolodrai@meta.com
Add a test for CONST_PTR_TO_MAP comparison with a non-0 constant. A
BPF program with this code must not pass verification in unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-3-isolodrai@meta.com
When reg->type is CONST_PTR_TO_MAP, it can not be null. However the
verifier explores the branches under rX == 0 in check_cond_jmp_op()
even if reg->type is CONST_PTR_TO_MAP, because it was not checked for
in reg_not_null().
Fix this by adding CONST_PTR_TO_MAP to the set of types that are
considered non nullable in reg_not_null().
An old "unpriv: cmp map pointer with zero" selftest fails with this
change, because now early out correctly triggers in
check_cond_jmp_op(), making the verification to pass.
In practice verifier may allow pointer to null comparison in unpriv,
since in many cases the relevant branch and comparison op are removed
as dead code. So change the expected test result to __success_unpriv.
Signed-off-by: Ihor Solodrai <isolodrai@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250609183024.359974-2-isolodrai@meta.com
Move static inline functions id_from_prog_fd() and id_from_link_fd()
from prog_tests/tc_helpers.h to test_progs.h so these two functions
can be reused for later cgroup mprog selftests.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250606163151.2429325-1-yonghong.song@linux.dev
When FRED is enabled, if the Trap Flag (TF) is set without an external
debugger attached, it can lead to an infinite loop in the SIGTRAP
handler. To avoid this, the software event flag in the augmented SS
must be cleared, ensuring that no single-step trap remains pending when
ERETU completes.
This test checks for that specific scenario—verifying whether the kernel
correctly prevents an infinite SIGTRAP loop in this edge case when FRED
is enabled.
The test should _always_ pass with IDT event delivery, thus no need to
disable the test even when FRED is not enabled.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-3-xin%40zytor.com
this cycle regression (well, bugfix for this cycle bugfix for v6.15-rc1 regression)
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
selftests/mount_setattr: adapt detached mount propagation test
v6.15 fs: allow clone_private_mount() for a path on real rootfs
v6.11 fs/fhandle.c: fix a race in call of has_locked_children()
v5.15 fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
v5.15 clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
v5.7 path_overmount(): avoid false negatives
v3.12 finish_automount(): don't leak MNT_LOCKED from parent to child
v2.6.15 do_change_type(): refuse to operate on unmounted/not ours mounts
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCaEXGDwAKCRBZ7Krx/gZQ
61WQAPwNBpcwum3F5fqT8rcKymqAUFpc0+rluJoBi+qfCQA9ywEAwn+Kh5qqtz++
cdVnUYQxBrh0u5IOzMEFITlgfYFJZA4=
=BIeU
-----END PGP SIGNATURE-----
Merge tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
fixes a longstanding and quite obscure bug related to the vma merging of
the uprobe mmap page.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaEN1LAAKCRDdBJ7gKXxA
jsfLAQCC+C8397X6lNKPI3bHGLGEHubP2uzb6bOFMAU6fIRobQEAqUnoUhfP+xsu
tDbcQEBZ+vfyeT9Zr9vA+uBDcA3OGw0=
=9oaG
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"The series 'Fix uprobe pte be overwritten when expanding vma' fixes a
longstanding and quite obscure bug related to the vma merging of the
uprobe mmap page"
* tag 'mm-stable-2025-06-06-16-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
selftests/mm: add test about uprobe pte be orphan during vma merge
selftests/mm: extract read_sysfs and write_sysfs into vm_util
mm: expose abnormal new_pte during move_ptes
mm: fix uprobe pte be overwritten when expanding vma
mm/damon: s/primitives/code/ on comments
or aren't considered necessary for -stable kernels. 11 are for MM.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaENzlAAKCRDdBJ7gKXxA
joNYAP9n38QNDUoRR6ChFikzzY77q4alD2NL0aqXBZdcSRXoUgEAlQ8Ea+t6xnzp
GnH+cnsA6FDp4F6lIoZBdENJyBYrkQE=
=ud9O
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes.
6 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels. 11 are for MM"
* tag 'mm-hotfixes-stable-2025-06-06-16-02' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
MAINTAINERS: add mm swap section
kmsan: test: add module description
MAINTAINERS: add tlb trace events to MMU GATHER AND TLB INVALIDATION
mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race
mm/hugetlb: unshare page tables during VMA split, not before
MAINTAINERS: add Alistair as reviewer of mm memory policy
iov_iter: use iov_offset for length calculation in iov_iter_aligned_bvec
mm/mempolicy: fix incorrect freeing of wi_kobj
alloc_tag: handle module codetag load errors as module load failures
mm/madvise: handle madvise_lock() failure during race unwinding
mm: fix vmstat after removing NR_BOUNCE
KVM: s390: rename PROT_NONE to PROT_TYPE_DUMMY
Make sure that detached trees don't receive mount propagation.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013626.1553001-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
and other related metrics properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013621.1552332-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, uffd_register.range.len is set to 4096 for command
'ioctl(uffd, UFFDIO_REGISTER, &uffd_register)'. For arm64 64KB page size,
the len must be 64KB size aligned as page size alignment is required.
See fs/userfaultfd.c:validate_unaligned_range().
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013615.1551783-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow, if tested failure,
I see a long list of log output like
...
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
test_xdp_adjust_frags_tail_grow:PASS:9Kb+10b-untouched 0 nsec
...
There are total 7374 lines of the above which is too much. Let us
only issue such logs when it is an assert failure.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013610.1551399-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
* Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions.
* Support for getrandom() in the VDSO.
* Support for mseal.
* Optimized routines for raid6 syndrome and recovery calculations.
* kexec_file() supports loading Image-formatted kernel binaries.
* Improvements to the instruction patching framework to allow for atomic
instruction patching, along with rules as to how systems need to
behave in order to function correctly.
* Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions.
* Various fixes and cleanups, including: misaligned access handling, perf
symbol mangling, module loading, PUD THPs, and improved uaccess
routines.
-----BEGIN PGP SIGNATURE-----
iQJNBAABCAA3FiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmhDLP8ZHHBhbG1lcmRh
YmJlbHRAZ29vZ2xlLmNvbQAKCRAuExnzX7sYiZhFD/4+Zikkld812VjFb9dTF+Wj
n/x9h86zDwAEFgf2BMIpUQhHru6vtdkO2l/Ky6mQblTPMWLafF4eK85yCsf84sQ0
+RX4sOMLZ0+qvqxKX+aOFe9JXOWB0QIQuPvgBfDDOV4UTm60sglIxwqOpKcsBEHs
2nplXXjiv0ckaMFLos8xlwu1uy4A/jMfT3Y9FDcABxYCqBoKOZ1frcL9ezJZbHbv
BoOKLDH8ZypFxIG/eQ511lIXXtrnLas0l4jHWjrfsWu6pmXTgJasKtbGuH3LoLnM
G/4qvHufR6lpVUOIL5L0V6PpsmYwDi/ciFIFlc8NH2oOZil3qiVaGSEbJIkWGFu9
8lWTXQWnbinZbfg2oYbWp8GlwI70vKomtDyYNyB9q9Cq9jyiTChMklRNODr4764j
ZiEnzc/l4KyvaxUg8RLKCT595lKECiUDnMytbIbunJu05HBqRCoGpBtMVzlQsyUd
ybkRt3BA7eOR8/xFA7ZZQeJofmiu2yxkBs5ggMo8UnSragw27hmv/OA0mWMXEuaD
aaWc4ZKpKqf7qLchLHOvEl5ORUhsisyIJgZwOqdme5rQoWorVtr51faA4AKwFAN4
vcKgc5qJjK8vnpW+rl3LNJF9LtH+h4TgmUI853vUlukPoH2oqRkeKVGSkxG0iAze
eQy2VjP1fJz6ciRtJZn9aw==
=cZGy
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for the FWFT SBI extension, which is part of SBI 3.0 and a
dependency for many new SBI and ISA extensions
- Support for getrandom() in the VDSO
- Support for mseal
- Optimized routines for raid6 syndrome and recovery calculations
- kexec_file() supports loading Image-formatted kernel binaries
- Improvements to the instruction patching framework to allow for
atomic instruction patching, along with rules as to how systems need
to behave in order to function correctly
- Support for a handful of new ISA extensions: Svinval, Zicbop, Zabha,
some SiFive vendor extensions
- Various fixes and cleanups, including: misaligned access handling,
perf symbol mangling, module loading, PUD THPs, and improved uaccess
routines
* tag 'riscv-for-linus-6.16-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (69 commits)
riscv: uaccess: Only restore the CSR_STATUS SUM bit
RISC-V: vDSO: Wire up getrandom() vDSO implementation
riscv: enable mseal sysmap for RV64
raid6: Add RISC-V SIMD syndrome and recovery calculations
riscv: mm: Add support for Svinval extension
RISC-V: Documentation: Add enough title underlines to CMODX
riscv: Improve Kconfig help for RISCV_ISA_V_PREEMPTIVE
MAINTAINERS: Update Atish's email address
riscv: uaccess: do not do misaligned accesses in get/put_user()
riscv: process: use unsigned int instead of unsigned long for put_user()
riscv: make unsafe user copy routines use existing assembly routines
riscv: hwprobe: export Zabha extension
riscv: Make regs_irqs_disabled() more clear
perf symbols: Ignore mapping symbols on riscv
RISC-V: Kconfig: Fix help text of CMDLINE_EXTEND
riscv: module: Optimize PLT/GOT entry counting
riscv: Add support for PUD THP
riscv: xchg: Prefetch the destination word for sc.w
riscv: Add ARCH_HAS_PREFETCH[W] support with Zicbop
riscv: Add support for Zicbop
...
-----BEGIN PGP SIGNATURE-----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=gs32
-----END PGP SIGNATURE-----
Merge tag 'block-6.16-20250606' of git://git.kernel.dk/linux
Pull more block updates from Jens Axboe:
- NVMe pull request via Christoph:
- TCP error handling fix (Shin'ichiro Kawasaki)
- TCP I/O stall handling fixes (Hannes Reinecke)
- fix command limits status code (Keith Busch)
- support vectored buffers also for passthrough (Pavel Begunkov)
- spelling fixes (Yi Zhang)
- MD pull request via Yu:
- fix REQ_RAHEAD and REQ_NOWAIT IO err handling for raid1/10
- fix max_write_behind setting for dm-raid
- some minor cleanups
- Integrity data direction fix and cleanup
- bcache NULL pointer fix
- Fix for loop missing write start/end handling
- Decouple hardware queues and IO threads in ublk
- Slew of ublk selftests additions and updates
* tag 'block-6.16-20250606' of git://git.kernel.dk/linux: (29 commits)
nvme: spelling fixes
nvme-tcp: fix I/O stalls on congested sockets
nvme-tcp: sanitize request list handling
nvme-tcp: remove tag set when second admin queue config fails
nvme: enable vectored registered bufs for passthrough cmds
nvme: fix implicit bool to flags conversion
nvme: fix command limits status code
selftests: ublk: kublk: improve behavior on init failure
block: flip iter directions in blk_rq_integrity_map_user()
block: drop direction param from bio_integrity_copy_user()
selftests: ublk: cover PER_IO_DAEMON in more stress tests
Documentation: ublk: document UBLK_F_PER_IO_DAEMON
selftests: ublk: add stress test for per io daemons
selftests: ublk: add functional test for per io daemons
selftests: ublk: kublk: decouple ublk_queues from ublk server threads
selftests: ublk: kublk: move per-thread data out of ublk_queue
selftests: ublk: kublk: lift queue initialization out of thread
selftests: ublk: kublk: tie sqe allocation to io instead of queue
selftests: ublk: kublk: plumb q_id in io_uring user_data
ublk: have a per-io daemon instead of a per-queue daemon
...
Currently, __split_vma() triggers hugetlb page table unsharing through
vm_ops->may_split(). This happens before the VMA lock and rmap locks are
taken - which is too early, it allows racing VMA-locked page faults in our
process and racing rmap walks from other processes to cause page tables to
be shared again before we actually perform the split.
Fix it by explicitly calling into the hugetlb unshare logic from
__split_vma() in the same place where THP splitting also happens. At that
point, both the VMA and the rmap(s) are write-locked.
An annoying detail is that we can now call into the helper
hugetlb_unshare_pmds() from two different locking contexts:
1. from hugetlb_split(), holding:
- mmap lock (exclusively)
- VMA lock
- file rmap lock (exclusively)
2. hugetlb_unshare_all_pmds(), which I think is designed to be able to
call us with only the mmap lock held (in shared mode), but currently
only runs while holding mmap lock (exclusively) and VMA lock
Backporting note:
This commit fixes a racy protection that was introduced in commit
b30c14cd61 ("hugetlb: unshare some PMDs when splitting VMAs"); that
commit claimed to fix an issue introduced in 5.13, but it should actually
also go all the way back.
[jannh@google.com: v2]
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-1-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250528-hugetlb-fixes-splitrace-v2-0-1329349bad1a@google.com
Link: https://lkml.kernel.org/r/20250527-hugetlb-fixes-splitrace-v1-1-f4136f5ec58a@google.com
Fixes: 39dde65c99 ("[PATCH] shared page table for hugetlb page")
Signed-off-by: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org> [b30c14cd6102: hugetlb: unshare some PMDs when splitting VMAs]
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extract read_sysfs and write_sysfs into vm_util. Meanwhile, rename the
function in thuge-gen that has the same name as read_sysfs.
Link: https://lkml.kernel.org/r/20250529155650.4017699-4-pulehui@huaweicloud.com
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hook up the generic vDSO implementation to the generic vDSO getrandom
implementation by providing the required __arch_chacha20_blocks_nostack
and getrandom_syscall implementations. Also wire up the selftests.
The benchmark result:
vdso: 25000000 times in 2.466341333 seconds
libc: 25000000 times in 41.447720005 seconds
syscall: 25000000 times in 41.043926672 seconds
vdso: 25000000 x 256 times in 162.286219353 seconds
libc: 25000000 x 256 times in 2953.855018685 seconds
syscall: 25000000 x 256 times in 2796.268546000 seconds
[ alex: - Fix dynamic relocation
- Squash Nathan's fix https://lore.kernel.org/all/20250423-riscv-fix-compat_vdso-lld-v2-1-b7bbbc244501@kernel.org/
- Add comment from Loongarch ]
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Link: https://lore.kernel.org/r/20250411024600.16045-1-xry111@xry111.site
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Palmer Dabbelt <palmer@dabbelt.com>
Within __add_three() function, should use function parameters instead of
global variables. So that the variables groot_nested.inner.root and
groot_nested.inner.glock in rbtree_add_nodes_nested() are tested
correctly.
Signed-off-by: Rong Tao <rongtao@cestc.cn>
Link: https://lore.kernel.org/r/tencent_3DD7405C0839EBE2724AC5FA357B5402B105@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When this mode is turned on, "emit_zeroes" and "compact" have no effect,
and embedded NUL characters always terminate printing of an array.
Signed-off-by: Blake Jones <blakejones@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250603203701.520541-2-blakejones@google.com
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN
in all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place,
fix GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth: stmmac: prevent div by 0 when clock rate is misconfigured
- eth: ice: fix Tx scheduler handling of XDP and changing queue count
- eth: b53: fix support for the RGMII interface when delays configured
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=sRQt
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, wireless, Bluetooth, and Netfilter.
Current release - regressions:
- Revert "kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in
all_tests", makes kunit error out if compiler is old
- wifi: iwlwifi: mvm: fix assert on suspend
- rxrpc: fix return from none_validate_challenge()
Current release - new code bugs:
- ovpn: couple of fixes for socket cleanup and UDP-tunnel teardown
- can: kvaser_pciefd: refine error prone echo_skb_max handling logic
- fix net_devmem_bind_dmabuf() stub when DEVMEM not compiled
- eth: airoha: fixes for config / accel in bridge mode
Previous releases - regressions:
- Bluetooth: hci_qca: move the SoC type check to the right place, fix
GPIO integration
- prevent a NULL deref in rtnl_create_link() after locking changes
- fix udp gso skb_segment after pull from frag_list
- hv_netvsc: fix potential deadlock in netvsc_vf_setxdp()
Previous releases - always broken:
- netfilter:
- nf_nat: also check reverse tuple to obtain clashing entry
- nf_set_pipapo_avx2: fix initial map fill (zeroing)
- fix the helper for incremental update of packet checksums after
modifying the IP address, used by ILA and BPF
- eth:
- stmmac: prevent div by 0 when clock rate is misconfigured
- ice: fix Tx scheduler handling of XDP and changing queue count
- eth: fix support for the RGMII interface when delays configured"
* tag 'net-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits)
calipso: unlock rcu before returning -EAFNOSUPPORT
seg6: Fix validation of nexthop addresses
net: prevent a NULL deref in rtnl_create_link()
net: annotate data-races around cleanup_net_task
selftests: drv-net: tso: make bkg() wait for socat to quit
selftests: drv-net: tso: fix the GRE device name
selftests: drv-net: add configs for the TSO test
wireguard: device: enable threaded NAPI
netlink: specs: rt-link: decode ip6gre
netlink: specs: rt-link: add missing byte-order properties
net: wwan: mhi_wwan_mbim: use correct mux_id for multiplexing
wifi: cfg80211/mac80211: correctly parse S1G beacon optional elements
net: dsa: b53: do not touch DLL_IQQD on bcm53115
net: dsa: b53: allow RGMII for bcm63xx RGMII ports
net: dsa: b53: do not configure bcm63xx's IMP port interface
net: dsa: b53: do not enable RGMII delay on bcm63xx
net: dsa: b53: do not enable EEE on bcm63xx
net: ti: icssg-prueth: Fix swapped TX stats for MII interfaces.
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
...
Commit 846742f7e3 ("selftests: drv-net: add a warning for
bkg + shell + terminate") added a warning for bkg() used
with terminate=True. The tso test was missed as we didn't
have it running anywhere in NIPA. Add exit_wait=True, to avoid:
# Warning: combining shell and terminate is risky!
# SIGTERM may not reach the child on zsh/ksh!
getting printed twice for every variant.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012055.891431-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The device type for IPv4 GRE is "gre" not "ipgre",
unlike for IPv6 which uses "ip6gre".
Not sure how I missed this when writing the test, perhaps
because all HW I have access to is on an IPv6-only network.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604012031.891242-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing config options for the tso.py test, specifically
to make sure the kernel is built with vxlan and gre tunnels.
I noticed this while adding a TSO-capable device QEMU to the CI.
Previously we only run virtio tests and it doesn't report LSO
stats on the QEMU we have.
Fixes: 0d0f4174f6 ("selftests: drv-net: add a simple TSO test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250604001653.853008-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
arch_timer_edge_cases uses ~0 as the maximum counter value, however there's
no architectural guarantee that this is valid.
Figure out the effective counter width based on the effective frequency
like it's done by the kernel.
This also serves as a workaround for AC03_CPU_14 that led to the
following assertion failure on ampere-one machines:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:169: timer_condition == istatus
pid=11236 tid=11236 errno=4 - Interrupted system call
1 0x0000000000404ce7: test_run at arch_timer_edge_cases.c:938
2 0x0000000000401ebb: main at arch_timer_edge_cases.c:1053
3 0x0000ffff9fa8625b: ?? ??:0
4 0x0000ffff9fa8633b: ?? ??:0
5 0x0000000000401fef: _start at ??:?
0x1 != 0x0 (timer_condition != istatus)
Note that the following subtest only worked since the counter initialized
with CVAL_MAX would instantly overflow (which is no longer the case):
test_set_cnt_after_cval_no_irq(timer, 0, DEF_CNT, CVAL_MAX, sm);
To fix this we could swap CVAL_MAX for 0 here but since that is already
done by test_move_counters_behind_timers() let's remove that subtest.
Link: https://lore.kernel.org/kvmarm/ac1de1d2-ef2b-d439-dc48-8615e121b07b@redhat.com
Link: https://amperecomputing.com/assets/AmpereOne_Developer_ER_v0_80_20240823_28945022f4.pdf
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-5-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
arch_timer_edge_cases hits the following assertion in < 10% of the test runs:
==== Test Assertion Failure ====
arm64/arch_timer_edge_cases.c:490: timer_get_cntct(timer) >= DEF_CNT + (timer_get_cntfrq() * (uint64_t)(delta_2_ms) / 1000)
pid=17110 tid=17110 errno=4 - Interrupted system call
1 0x0000000000404ec7: test_run at arch_timer_edge_cases.c:945
2 0x0000000000401fa3: main at arch_timer_edge_cases.c:1074
3 0x0000ffffa774b587: ?? ??:0
4 0x0000ffffa774b65f: ?? ??:0
5 0x000000000040206f: _start at ??:?
timer_get_cntct(timer) >= DEF_CNT + msec_to_cycles(delta_2_ms)
Enabling the timer without proper xval initialization in set_tval_irq()
resulted in an early interrupt during timer reprogramming. Make sure
to set the xval before setting the enable bit.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-4-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
arch_timer_edge_cases tries to migrate itself across host cpus. Before
the first test, it migrates to cpu 0 by setting up an affinity mask with
only bit 0 set. After that it looks for the next possible cpu in the
current affinity mask which still has only bit 0 set. So there is no
migration at all.
Fix this by reading the default mask at start and use this to find
the next cpu in each iteration.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-3-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fix the help text for arch_timer_edge_cases to show the correct
option for setting the wait time.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250605103613.14544-2-sebott@redhat.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The test fails at the MPOL step if multiple nodes are available. The
reason is that mbind() sets the policy but the home_node, which is
retrieved by the futex code, is not set. This causes to retrieve the
current node and with multiple nodes it fails on one of the iterations.
Use numa_set_mempolicy_home_node() to set the expected node.
Use ksft_exit_fail_msg() to fail and exit in order not to confuse ktap.
Fixes: 3163369407 ("selftests/futex: Add futex_numa_mpol")
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250528085521.1938355-3-bigeasy@linutronix.de
Mark reported that futex_priv_hash fails on ARM64.
It turns out that the command line parsing does not terminate properly
and ends in the default case assuming an invalid option was passed.
Use an int as the return type for getopt().
Closes: https://lore.kernel.org/all/31869a69-063f-44a3-a079-ba71b2506cce@sirena.org.uk/
Fixes: 3163369407 ("selftests/futex: Add futex_numa_mpol")
Fixes: cda95faef7 ("selftests/futex: Add futex_priv_hash")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250528085521.1938355-2-bigeasy@linutronix.de
-----BEGIN PGP SIGNATURE-----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=CFYz
-----END PGP SIGNATURE-----
Merge tag 'nf-25-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Zero out the remainder in nft_pipapo AVX2 implementation, otherwise
next lookup could bogusly report a mismatch. This is followed by two
patches to update nft_pipapo selftests to cover for the previous bug.
From Florian Westphal.
2) Check for reverse tuple too in case of esoteric NAT collisions for
UDP traffic and extend selftest coverage. Also from Florian.
netfilter pull request 25-06-05
* tag 'nf-25-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug
selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing
netfilter: nf_set_pipapo_avx2: fix initial map fill
====================
Link: https://patch.msgid.link/20250605085735.52205-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* dropped bogus call to setup_udp_tunnel_sock() during
cleanup, substituted by proper state unwind
* fixed race condition between peer removal (by kernel
space) and socket closing (by user space)
* fixed sleep in atomic context along TCP RX error path
* fixes for ovpn kselftests
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEmavcbPjUEuTeX8D8C3DlOqA41YcFAmg+17IACgkQC3DlOqA4
1YfGnQf7BCqweJAqPZs45DrMO/zu0mygbvzxI5x1VnBSQvtUfEEwgY3Mk9Y/8OxW
+QxD9yYl8sf30ZzGTFFYtBq0XwvcP0Nlo4WFD7+2ufvFgojIAwCsF25of+hODGLZ
5KF83VYDAMvUmK7Rq4gGyi/HC7+rWNhShfoXBh6nfQjNa75NWwIwp8wEsTMovq2Y
DiH6VzCjkUgnRjJYG5g/D6n0pHnbUkrAPi3AT+aB8PX9sikrTZhBWX4mmY8n6Xlo
KT83ByzJqc5svnbsQEGRuhXbyuKipBhcVmOohmulBB/uhXUZHDcem9L0wp1hR2SB
y/lZQxt9bNdEXfh0J7r5QxI2vkZgZQ==
=Y6+P
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-20250603' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
In this batch you can find the following bug fixes:
Patch 1: when releasing a UDP socket we were wrongly invoking
setup_udp_tunnel_sock() with an empty config. This was not
properly shutting down the UDP encap state.
With this patch we simply undo what was done during setup.
Patch 2: ovpn was holding a reference to a 'struct socket'
without increasing its reference counter. This was intended
and worked as expected until we hit a race condition where
user space tries to close the socket while kernel space is
also releasing it. In this case the (struct socket *)->sk
member would disappear under our feet leading to a null-ptr-deref.
This patch fixes this issue by having struct ovpn_socket hold
a reference directly to the sk member while also increasing
its reference counter.
Patch 3: in case of errors along the TCP RX path (softirq)
we want to immediately delete the peer, but this operation may
sleep. With this patch we move the peer deletion to a scheduled
worker.
Patch 4 and 5 are instead fixing minor issues in the ovpn
kselftests.
* tag 'ovpn-net-20250603' of https://github.com/OpenVPN/ovpn-net-next:
selftest/net/ovpn: fix missing file
selftest/net/ovpn: fix TCP socket creation
ovpn: avoid sleep in atomic context in TCP RX error path
ovpn: ensure sk is still valid during cleanup
ovpn: properly deconfigure UDP-tunnel
====================
Link: https://patch.msgid.link/20250603111110.4575-1-antonio@openvpn.net/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This will fail without the previous bug fix because we erronously
believe that the clashing entry went way.
However, the clash exists in the opposite direction due to an
existing nat mapping:
PASS: IP statless for ns2-LgTIuS
ERROR: failed to test udp ns1-x4iyOW to ns2-LgTIuS with dnat rule step 2, result: ""
This is partially adapted from test instructions from the below
ubuntu tracker.
Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2109889
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Shaun Brady <brady.1345@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit 0935ee6032 ("selftests: netfilter: add test case for recent mismatch bug")
added a regression check for incorrect initial fill of the result map
that was fixed with 791a615b7a ("netfilter: nf_set_pipapo: fix initial map fill").
The test used 'nft get element', i.e., control plane checks for
match/nomatch results.
The control plane however doesn't use avx2 version, so we need to
send+match packets.
As the additional packet match/nomatch is slow, don't do this for
every element added/removed: add and use maybe_send_(no)match
helpers and use them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The selftest uses following rule:
... @test counter name "test"
Then sends a packet, then checks if the named counter did increment or
not.
This is fine for the 'no-match' test case: If anything matches the
counter increments and the test fails as expected.
But for the 'should match' test cases this isn't optimal.
Consider buggy matching, where the packet matches entry x, but it
should have matched entry y.
In that case the test would erronously pass.
Rework the selftest to use per-element counters to avoid this.
After sending packet that should have matched entry x, query the
relevant element via 'nft reset element' and check that its counter
had incremented.
The 'nomatch' case isn't altered, no entry should match so the named
counter must be 0, changing it to the per-element counter would then
pass if another entry matches.
The downside of this change is a slight increase in test run-time by
a few seconds.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Some failure modes are handled poorly by kublk. For example, if ublk_drv
is built as a module but not currently loaded into the kernel, ./kublk
add ... just hangs forever. This happens because in this case (and a few
others), the worker process does not notify its parent (via a write to
the shared eventfd) that it has tried and failed to initialize, so the
parent hangs forever. Fix this by ensuring that we always notify the
parent process of any initialization failure, and have the parent print
a (not very descriptive) log line when this happens.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250603-ublk_init_fail-v1-1-87c91486230e@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Remove always true condition in cxl features code.
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL subsystem, including
documentation on CXL related platform and firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub", "Performance Maitenance"
and "Memory Sparing". The series connects CXL to EDAC.
-----BEGIN PGP SIGNATURE-----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=evKj
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Remove always true condition in cxl features code
- Add verification of CHBS length for CXL 2.0
- Ignore interleave granularity when interleave ways is 1
- Add update addressing mising MODULE_DESCRIPTION for cxl_test
- A series of cleanups/refactor to prep for AMD Zen5 translate code
- Clean %pa debug printk in core/hdm.c
- Documentation updates:
- Update to CXL Maturity Map
- Fixes to source linking in CXL documentation
- CXL documentation fixes, spelling corrections
- A large collection of CXL documentation for the entire CXL
subsystem, including documentation on CXL related platform and
firmware notes
- Remove redundant code of cxlctl_get_supported_features()
- Series to support CXL RAS Features
- Including "Patrol Scrub Control", "Error Check Scrub",
"Performance Maitenance" and "Memory Sparing". The series
connects CXL to EDAC.
* tag 'cxl-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (53 commits)
cxl/edac: Add CXL memory device soft PPR control feature
cxl/edac: Add CXL memory device memory sparing control feature
cxl/edac: Support for finding memory operation attributes from the current boot
cxl/edac: Add support for PERFORM_MAINTENANCE command
cxl/edac: Add CXL memory device ECS control feature
cxl/edac: Add CXL memory device patrol scrub control feature
cxl: Update prototype of function get_support_feature_info()
EDAC: Update documentation for the CXL memory patrol scrub control feature
cxl/features: Remove the inline specifier from to_cxlfs()
cxl/feature: Remove redundant code of get supported features
docs: ABI: Fix "firwmare" to "firmware"
cxl/Documentation: Fix typo in sysfs write_bandwidth attribute path
cxl: doc/linux/access-coordinates Update access coordinates calculation methods
cxl: docs/platform/acpi/srat Add generic target documentation
cxl: docs/platform/cdat reference documentation
Documentation: Update the CXL Maturity Map
cxl: Sync up the driver-api/cxl documentation
cxl: docs - add self-referencing cross-links
cxl: docs/allocation/hugepages
cxl: docs/allocation/reclaim
...
test-large-mtu.sh is referenced by the Makefile
but does not exist.
Add it along the other scripts.
Fixes: 944f8b6aba ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
TCP sockets cannot be created with AF_UNSPEC, but
one among the supported family must be used.
Since commit 944f8b6aba ("selftest/net/ovpn: extend
coverage with more test cases") the default address
family for all tests was changed from AF_INET to AF_UNSPEC,
thus breaking all TCP cases.
Restore AF_INET as default address family for TCP listeners.
Fixes: 944f8b6aba ("selftest/net/ovpn: extend coverage with more test cases")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
We have the logic to include net/lib automatically for net related
selftests. However, currently, this logic is only in install target
which means only `make install` will have net/lib included. This commit
adds the logic to all target so that all `make`, `make run_tests` and
`make install` will have net/lib included in net related selftests.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250601142914.13379-1-minhquangbui99@gmail.com
Fixes: b86761ff63 ("selftests: net: add scaffolding for Netlink tests in Python")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit a571a9a1b1.
The commit in question breaks kunit for older compilers:
$ gcc --version
gcc (GCC) 11.5.0 20240719 (Red Hat 11.5.0-5)
$ ./tools/testing/kunit/kunit.py run --alltests --json --arch=x86_64
Configuring KUnit Kernel ...
Regenerating .config ...
Populating config with:
$ make ARCH=x86_64 O=.kunit olddefconfig
ERROR:root:Not all Kconfig options selected in kunitconfig were in the generated .config.
This is probably due to unsatisfied dependencies.
Missing: CONFIG_INIT_STACK_ALL_PATTERN=y
Link: https://lore.kernel.org/20250529083811.778bc31b@kernel.org
Fixes: a571a9a1b1 ("kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in all_tests")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://patch.msgid.link/20250530135800.13437-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sergey Senozhatsky adds infrastructure for passing algorithm-specific
parameters into zram. A single parameter `winbits' is implemented at
this time.
- The 5 patch series "memcg: nmi-safe kmem charging" from Shakeel Butt
makes memcg charging nmi-safe, which is required by BFP, which can
operate in NMI context.
- The 5 patch series "Some random fixes and cleanup to shmem" from
Kemeng Shi implements small fixes and cleanups in the shmem code.
- The 2 patch series "Skip mm selftests instead when kernel features are
not present" from Zi Yan fixes some issues in the MM selftest code.
- The 2 patch series "mm/damon: build-enable essential DAMON components
by default" from SeongJae Park reworks DAMON Kconfig to make it easier
to enable CONFIG_DAMON.
- The 2 patch series "sched/numa: add statistics of numa balance task
migration" from Libo Chen adds more info into sysfs and procfs files to
improve visibility into the NUMA balancer's task migration activity.
- The 4 patch series "selftests/mm: cow and gup_longterm cleanups" from
Mark Brown provides various updates to some of the MM selftests to make
them play better with the overall containing framework.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDzA9wAKCRDdBJ7gKXxA
js8sAP9V3COg+vzTmimzP3ocTkkbbIJzDfM6nXpE2EQ4BR3ejwD+NsIT2ZLtTF6O
LqAZpgO7ju6wMjR/lM30ebCq5qFbZAw=
=oruw
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "zram: support algorithm-specific parameters" from Sergey Senozhatsky
adds infrastructure for passing algorithm-specific parameters into
zram. A single parameter `winbits' is implemented at this time.
- "memcg: nmi-safe kmem charging" from Shakeel Butt makes memcg
charging nmi-safe, which is required by BFP, which can operate in NMI
context.
- "Some random fixes and cleanup to shmem" from Kemeng Shi implements
small fixes and cleanups in the shmem code.
- "Skip mm selftests instead when kernel features are not present" from
Zi Yan fixes some issues in the MM selftest code.
- "mm/damon: build-enable essential DAMON components by default" from
SeongJae Park reworks DAMON Kconfig to make it easier to enable
CONFIG_DAMON.
- "sched/numa: add statistics of numa balance task migration" from Libo
Chen adds more info into sysfs and procfs files to improve visibility
into the NUMA balancer's task migration activity.
- "selftests/mm: cow and gup_longterm cleanups" from Mark Brown
provides various updates to some of the MM selftests to make them
play better with the overall containing framework.
* tag 'mm-stable-2025-06-01-14-06' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (43 commits)
mm/khugepaged: clean up refcount check using folio_expected_ref_count()
selftests/mm: fix test result reporting in gup_longterm
selftests/mm: report unique test names for each cow test
selftests/mm: add helper for logging test start and results
selftests/mm: use standard ksft_finished() in cow and gup_longterm
selftests/damon/_damon_sysfs: skip testcases if CONFIG_DAMON_SYSFS is disabled
sched/numa: add statistics of numa balance task
sched/numa: fix task swap by skipping kernel threads
tools/testing: check correct variable in open_procmap()
tools/testing/vma: add missing function stub
mm/gup: update comment explaining why gup_fast() disables IRQs
selftests/mm: two fixes for the pfnmap test
mm/khugepaged: fix race with folio split/free using temporary reference
mm: add CONFIG_PAGE_BLOCK_ORDER to select page block order
mmu_notifiers: remove leftover stub macros
selftests/mm: deduplicate test names in madv_populate
kcov: rust: add flags for KCOV with Rust
mm: rust: make CONFIG_MMU ifdefs more narrow
mmu_gather: move tlb flush for VM_PFNMAP/VM_MIXEDMAP vmas into free_pgtables()
mm/damon/Kconfig: enable CONFIG_DAMON by default
...
* Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/.
kernel/ patches acked by Peter Zijlstra.
* Add MGLRU support to the access tracking perf test.
ARM fixes:
* Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change.
* Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o private
IRQs allocated.
* Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum.
* Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping.
* Avoid dereferencing a NULL pointer in the VGIC debug code, which can
happen if the device doesn't have any mapping yet.
s390:
* Fix interaction between some filesystems and Secure Execution
* Some cleanups and refactorings, preparing for an upcoming big series
x86:
* Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
* Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
* Refine and harden handling of spurious faults.
* Add support for ALLOWED_SEV_FEATURES.
* Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
* Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
* Don't account temporary allocations in sev_send_update_data().
* Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
* Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU IBPB, between
SVM and VMX.
* Advertise support to userspace for WRMSRNS and PREFETCHI.
* Rescan I/O APIC routes after handling EOI that needed to be intercepted due
to the old/previous routing, but not the new/current routing.
* Add a module param to control and enumerate support for device posted
interrupts.
* Fix a potential overflow with nested virt on Intel systems running 32-bit kernels.
* Flush shadow VMCSes on emergency reboot.
* Add support for SNP to the various SEV selftests.
* Add a selftest to verify fastops instructions via forced emulation.
* Refine and optimize KVM's software processing of the posted interrupt bitmap, and share
the harvesting code between KVM and the kernel's Posted MSI handler
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg9TjwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOUxQf7B7nnWqIKd7jSkGzSD6YsSX9TXktr
2tJIOfWM3zNYg5GRCidg+m4Y5+DqQWd3Hi5hH2P9wUw7RNuOjOFsDe+y0VBr8ysE
ve39t/yp+mYalNmHVFl8s3dBDgrIeGKiz+Wgw3zCQIBZ18rJE1dREhv37RlYZ3a2
wSvuObe8sVpCTyKIowDs1xUi7qJUBoopMSuqfleSHawRrcgCpV99U8/KNFF5plLH
7fXOBAHHniVCVc+mqQN2wxtVJDhST+U3TaU4GwlKy9Yevr+iibdOXffveeIgNEU4
D6q1F2zKp6UdV3+p8hxyaTTbiCVDqsp9WOgY/0I/f+CddYn0WVZgOlR+ow==
=mYFL
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
Generic:
- Clean up locking of all vCPUs for a VM by using the *_nest_lock()
family of functions, and move duplicated code to virt/kvm/. kernel/
patches acked by Peter Zijlstra
- Add MGLRU support to the access tracking perf test
ARM fixes:
- Make the irqbypass hooks resilient to changes in the GSI<->MSI
routing, avoiding behind stale vLPI mappings being left behind. The
fix is to resolve the VGIC IRQ using the host IRQ (which is stable)
and nuking the vLPI mapping upon a routing change
- Close another VGIC race where vCPU creation races with VGIC
creation, leading to in-flight vCPUs entering the kernel w/o
private IRQs allocated
- Fix a build issue triggered by the recently added workaround for
Ampere's AC04_CPU_23 erratum
- Correctly sign-extend the VA when emulating a TLBI instruction
potentially targeting a VNCR mapping
- Avoid dereferencing a NULL pointer in the VGIC debug code, which
can happen if the device doesn't have any mapping yet
s390:
- Fix interaction between some filesystems and Secure Execution
- Some cleanups and refactorings, preparing for an upcoming big
series
x86:
- Wait for target vCPU to ack KVM_REQ_UPDATE_PROTECTED_GUEST_STATE
to fix a race between AP destroy and VMRUN
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for
the VM
- Refine and harden handling of spurious faults
- Add support for ALLOWED_SEV_FEATURES
- Add #VMGEXIT to the set of handlers special cased for
CONFIG_RETPOLINE=y
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing
features that utilize those bits
- Don't account temporary allocations in sev_send_update_data()
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock
Threshold
- Unify virtualization of IBRS on nested VM-Exit, and cross-vCPU
IBPB, between SVM and VMX
- Advertise support to userspace for WRMSRNS and PREFETCHI
- Rescan I/O APIC routes after handling EOI that needed to be
intercepted due to the old/previous routing, but not the
new/current routing
- Add a module param to control and enumerate support for device
posted interrupts
- Fix a potential overflow with nested virt on Intel systems running
32-bit kernels
- Flush shadow VMCSes on emergency reboot
- Add support for SNP to the various SEV selftests
- Add a selftest to verify fastops instructions via forced emulation
- Refine and optimize KVM's software processing of the posted
interrupt bitmap, and share the harvesting code between KVM and the
kernel's Posted MSI handler"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (93 commits)
rtmutex_api: provide correct extern functions
KVM: arm64: vgic-debug: Avoid dereferencing NULL ITE pointer
KVM: arm64: vgic-init: Plug vCPU vs. VGIC creation race
KVM: arm64: Unmap vLPIs affected by changes to GSI routing information
KVM: arm64: Resolve vLPI by host IRQ in vgic_v4_unset_forwarding()
KVM: arm64: Protect vLPI translation with vgic_irq::irq_lock
KVM: arm64: Use lock guard in vgic_v4_set_forwarding()
KVM: arm64: Mask out non-VA bits from TLBI VA* on VNCR invalidation
arm64: sysreg: Drag linux/kconfig.h to work around vdso build issue
KVM: s390: Simplify and move pv code
KVM: s390: Refactor and split some gmap helpers
KVM: s390: Remove unneeded srcu lock
s390: Remove unneeded includes
s390/uv: Improve splitting of large folios that cannot be split while dirty
s390/uv: Always return 0 from s390_wiggle_split_folio() if successful
s390/uv: Don't return 0 from make_hva_secure() if the operation was not successful
rust: add helper for mutex_trylock
RISC-V: KVM: use kvm_trylock_all_vcpus when locking all vCPUs
KVM: arm64: use kvm_trylock_all_vcpus when locking all vCPUs
x86: KVM: SVM: use kvm_lock_all_vcpus instead of a custom implementation
...
We have stress_03, stress_04 and stress_05 for checking new feature vs.
stress IO & device removal & ublk server crash & recovery, so let the
three existing stress tests cover PER_IO_DAEMON.
Then stress_06 can be removed, since the same test function is included in
stress_03.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250602132113.1398645-1-ming.lei@redhat.com
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
[axboe: remove test_stress_06.sh from Makefile too]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ihor Solodrai reported selftest 'btf_tag/btf_type_tag_percpu_vmlinux_helper'
failure ([1]) during 6.16 merge window. The failure log:
...
7: (15) if r0 == 0x0 goto pc+1 ; R0=ptr_css_rstat_cpu()
; *(volatile int *)rstat; @ btf_type_tag_percpu.c:68
8: (61) r1 = *(u32 *)(r0 +0)
cannot access ptr member updated_children with moff 0 in struct css_rstat_cpu with off 0 size 4
Two changes are needed. First, 'struct cgroup_rstat_cpu' needs to be
replaced with 'struct css_rstat_cpu' to be consistent with new data
structure. Second, layout of 'css_rstat_cpu' is changed compared
to 'cgroup_rstat_cpu'. The first member becomes a pointer so
the bpf prog needs to do 8-byte load instead of 4-byte load.
[1] https://lore.kernel.org/bpf/6f688f2e-7d26-423a-9029-d1b1ef1c938a@linux.dev/
Cc: Ihor Solodrai <ihor.solodrai@linux.dev>
Cc: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: JP Kobryn <inwardvessel@gmail.com>
Link: https://lore.kernel.org/r/20250529201151.1787575-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On linux-next, build for bpf selftest displays an error due to
mismatch in the expected function signature of bpf_testmod_test_read
and bpf_testmod_test_write.
Commit 97d06802d1 ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
changed the required type for struct bin_attribute to const struct bin_attribute.
To resolve the error, update corresponding signature for the callback.
Fixes: 97d06802d1 ("sysfs: constify bin_attribute argument of bin_attribute::read/write()")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/all/e915da49-2b9a-4c4c-a34f-877f378129f6@linux.ibm.com/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Link: https://lore.kernel.org/r/20250512091108.2015615-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The kselftest framework uses the string logged when a test result is
reported as the unique identifier for a test, using it to track test
results between runs. The gup_longterm test fails to follow this pattern,
it runs a single test function repeatedly with various parameters but each
result report is a string logging an error message which is fixed between
runs.
Since the code already logs each test uniquely before it starts refactor
to also print this to a buffer, then use that name as the test result.
This isn't especially pretty but is relatively straightforward and is a
great help to tooling.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-4-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The kselftest framework uses the string logged when a test result is
reported as the unique identifier for a test, using it to track test
results between runs. The cow test completely fails to follow this
pattern, it runs test functions repeatedly with various parameters with
each result report from those functions being a string logging an error
message which is fixed between runs.
Since the code already logs each test uniquely before it starts refactor
to also print this to a buffer, then use that name as the test result.
This isn't especially pretty but is relatively straightforward and is a
great help to tooling.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-3-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Several of the MM tests have a pattern of printing a description of the
test to be run then reporting the actual TAP result using a generic string
not connected to the specific test, often in a shared function used by
many tests. The name reported typically varies depending on the specific
result rather than the test too. This causes problems for tooling that
works with test results, the names reported with the results are used to
deduplicate tests and track them between runs so both duplicated names and
changing names cause trouble for things like UIs and automated bisection.
As a first step towards matching these tests better with the expectations
of kselftest provide helpers which record the test name as part of the
initial print and then use that as part of reporting a result.
This is not added as a generic kselftest helper partly because the use of
a variable to store the test name doesn't fit well with the header only
implementation of kselftest.h and partly because it's not really an
intended pattern. Ideally at some point the mm tests that use it will be
updated to not need it.
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-2-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: cow and gup_longterm cleanups", v2.
The bulk of these changes modify the cow and gup_longterm tests to report
unique and stable names for each test, bringing them into line with the
expectations of tooling that works with kselftest. The string reported as
a test result is used by tooling to both deduplicate tests and track tests
between test runs, using the same string for multiple tests or changing
the string depending on test result causes problems for user interfaces
and automation such as bisection.
It was suggested that converting to use kselftest_harness.h would be a
good way of addressing this, however that really wants the set of tests to
run to be known at compile time but both test programs dynamically
enumarate the set of huge page sizes the system supports and test each.
Refactoring to handle this would be even more invasive than these changes
which are large but straightforward and repetitive.
A version of the main gup_longterm cleanup was previously sent separately,
this version factors out the helpers for logging the start of the test
since the cow test looks very similar.
This patch (of 4):
The cow and gup_longterm test programs open code something that looks a
lot like the standard ksft_finished() helper to summarise the test results
and provide an exit code, convert to use ksft_finished().
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-0-ff198df8e38e@kernel.org
Link: https://lkml.kernel.org/r/20250527-selftests-mm-cow-dedupe-v2-1-ff198df8e38e@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_DAMON_SYSFS is disabled, the selftests fail with the following
outputs,
not ok 2 selftests: damon: sysfs_update_schemes_tried_regions_wss_estimation.py # exit=1
not ok 3 selftests: damon: damos_quota.py # exit=1
not ok 4 selftests: damon: damos_quota_goal.py # exit=1
not ok 5 selftests: damon: damos_apply_interval.py # exit=1
not ok 6 selftests: damon: damos_tried_regions.py # exit=1
not ok 7 selftests: damon: damon_nr_regions.py # exit=1
not ok 11 selftests: damon: sysfs_update_schemes_tried_regions_hang.py # exit=1
The root cause of this issue is that all the testcases above do not check
the sysfs interface of DAMON whether it exists or not. With this patch
applied, all the testcases above now pass successfully.
Link: https://lkml.kernel.org/r/20250531093937.1555159-1-lienze@kylinos.cn
Signed-off-by: Enze Li <lienze@kylinos.cn>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Check if "procmap_out->fd" is negative instead of "procmap_out" (which is
a pointer).
Link: https://lkml.kernel.org/r/aDbFuUTlJTBqziVd@stanley.mountain
Fixes: bd23f293a0 ("tools/testing: add PROCMAP_QUERY helper functions in mm self tests")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: levi.yun <yeoreum.yun@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The hugetlb fix introduced in commit ee40c9920a ("mm: fix copy_vma()
error handling for hugetlb mappings") mistakenly did not provide a stub
for the VMA userland testing, which results in a compile error when trying
to build this.
Provide this stub to resolve the issue.
Link: https://lkml.kernel.org/r/20250528-fix-vma-test-v1-1-c8a5f533b38f@oracle.com
Fixes: ee40c9920a ("mm: fix copy_vma() error handling for hugetlb mappings")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Jann Horn <jannh@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When unregistering the signal handler, we have to pass SIG_DFL, and
blindly reading from PFN 0 and PFN 1 seems to be problematic on !x86
systems. In particularly, on arm64 tx2 machines where noting resides at
these physical memory locations, we can generate RAS errors.
Let's fix it by scanning /proc/iomem for actual "System RAM".
Link: https://lkml.kernel.org/r/20250528195244.1182810-1-david@redhat.com
Fixes: 2616b37032 ("selftests/mm: add simple VM_PFNMAP tests based on mmap'ing /dev/mem")
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/all/232960c2-81db-47ca-a337-38c4bce5f997@arm.com/T/#u
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The madv_populate selftest has some repetitive code for several different
cases that it covers, included repeated test names used in
ksft_test_result() reports. This causes problems for automation, the test
name is used to both track the test between runs and distinguish between
multiple tests within the same run. Fix this by tweaking the messages
with duplication to be more specific about the contexts they're in.
Link: https://lkml.kernel.org/r/20250522-selftests-mm-madv-populate-dedupe-v1-1-fd1dedd79b4b@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running hugevm tests in a machine without kernel config present,
e.g., a VM running a kernel without CONFIG_IKCONFIG_PROC nor
/boot/config-*, skip hugevm tests, which reads kernel config to get page
table level information.
Link: https://lkml.kernel.org/r/20250516132938.356627-3-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Acked-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Adam Sindelar <adam@wowsignal.io>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Pedro Falcato <pfalcato@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Skip mm selftests instead when kernel features are not
present", v2.
Two guard_regions tests on userfaultfd fail when userfaultfd is not
present. Skip them instead.
hugevm test reads kernel config to get page table level information and
fails when neither /proc/config.gz nor /boot/config-* is present. Skip it
instead.
This patch (of 2):
When userfaultfd is not compiled into kernel, userfaultfd() returns -1,
causing guard_regions.uffd tests to fail. Skip the tests instead.
Link: https://lkml.kernel.org/r/20250516132938.356627-1-ziy@nvidia.com
Link: https://lkml.kernel.org/r/20250516132938.356627-2-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Cc: Adam Sindelar <adam@wowsignal.io>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The thuge-gen test program runs mmap() and shmget() tests for both every
available page size and the default page size, resulting in two tests for
the default size. These tests are distinct since the flags in the default
case do not specify an explicit size, add the flags to the test name that
is logged to deduplicate.
Link: https://lkml.kernel.org/r/20250515-selfests-mm-thuge-gen-dup-v1-1-057d2836553f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dev Jain <dev.jain@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The mlock2-tests test_mlock_lock() test reports two test results with an
identical string, one reporitng if it successfully locked a block of
memory and another reporting if the lock is still present after doing an
unlock (following a similar pattern to other tests in the same program).
This confuses test automation since the test string is used to deduplicate
tests, change the post unlock test to report "Unlocked" instead like the
other tests to fix this.
Link: https://lkml.kernel.org/r/20250515-selftest-mm-mlock2-dup-v1-1-963d5d7d243a@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Dev Jain <dev.jain@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
semaphore" from Lance Yang enhances the hung task detector. The
detector presently dumps the blocking tasks's stack when it is blocked
on a mutex. Lance's series extends this to semaphores.
- The 2 patch series "nilfs2: improve sanity checks in dirty state
propagation" from Wentao Liang addresses a couple of minor flaws in
nilfs2.
- The 2 patch series "scripts/gdb: Fixes related to lx_per_cpu()" from
Illia Ostapyshyn fixes a couple of issues in the gdb scripts.
- The 9 patch series "Support kdump with LUKS encryption by reusing LUKS
volume keys" from Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in the
series [0/N] cover letter.
- The 2 patch series "sysfs: add counters for lockups and stalls" from
Max Kellermann adds /sys/kernel/hardlockup_count and
/sys/kernel/hardlockup_count and /sys/kernel/rcu_stall_count.
- The 3 patch series "fork: Page operation cleanups in the fork code"
from Pasha Tatashin implements a number of code cleanups in fork.c.
- The 3 patch series "scripts/gdb/symbols: determine KASLR offset on
s390 during early boot" from Ilya Leoshkevich fixes some s390 issues in
the gdb scripts.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDuCvQAKCRDdBJ7gKXxA
jrkxAQCnFAp/uK9ckkbN4nfpJ0+OMY36C+A+dawSDtuRsIkXBAEAq3e6MNAUdg5W
Ca0cXdgSIq1Op7ZKEA+66Km6Rfvfow8=
=g45L
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
simplifies the act of creating a pte which addresses the first page in a
folio and reduces the amount of plumbing which architecture must
implement to provide this.
- The 8 patch series "Misc folio patches for 6.16" from Matthew Wilcox
is a shower of largely unrelated folio infrastructure changes which
clean things up and better prepare us for future work.
- The 3 patch series "memory,x86,acpi: hotplug memory alignment
advisement" from Gregory Price adds early-init code to prevent x86 from
leaving physical memory unused when physical address regions are not
aligned to memory block size.
- The 2 patch series "mm/compaction: allow more aggressive proactive
compaction" from Michal Clapinski provides some tuning of the (sadly,
hard-coded (more sadly, not auto-tuned)) thresholds for our invokation
of proactive compaction. In a simple test case, the reduction of a guest
VM's memory consumption was dramatic.
- The 8 patch series "Minor cleanups and improvements to swap freeing
code" from Kemeng Shi provides some code cleaups and a small efficiency
improvement to this part of our swap handling code.
- The 6 patch series "ptrace: introduce PTRACE_SET_SYSCALL_INFO API"
from Dmitry Levin adds the ability for a ptracer to modify syscalls
arguments. At this time we can alter only "system call information that
are used by strace system call tampering, namely, syscall number,
syscall arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- The 3 patch series "fs/proc: extend the PAGEMAP_SCAN ioctl to report
guard regions" from Andrei Vagin extends the info returned by the
PAGEMAP_SCAN ioctl against /proc/pid/pagemap. This permits CRIU to more
efficiently get at the info about guard regions.
- The 2 patch series "Fix parameter passed to page_mapcount_is_type()"
from Gavin Shan implements that fix. No runtime effect is expected
because validate_page_before_insert() happens to fix up this error.
- The 3 patch series "kernel/events/uprobes: uprobe_write_opcode()
rewrite" from David Hildenbrand basically brings uprobe text poking into
the current decade. Remove a bunch of hand-rolled implementation in
favor of using more current facilities.
- The 3 patch series "mm/ptdump: Drop assumption that pxd_val() is u64"
from Anshuman Khandual provides enhancements and generalizations to the
pte dumping code. This might be needed when 128-bit Page Table
Descriptors are enabled for ARM.
- The 12 patch series "Always call constructor for kernel page tables"
from Kevin Brodsky "ensures that the ctor/dtor is always called for
kernel pgtables, as it already is for user pgtables". This permits the
addition of more functionality such as "insert hooks to protect page
tables". This change does result in various architectures performing
unnecesary work, but this is fixed up where it is anticipated to occur.
- The 9 patch series "Rust support for mm_struct, vm_area_struct, and
mmap" from Alice Ryhl adds plumbing to permit Rust access to core MM
structures.
- The 3 patch series "fix incorrectly disallowed anonymous VMA merges"
from Lorenzo Stoakes takes advantage of some VMA merging opportunities
which we've been missing for 15 years.
- The 4 patch series "mm/madvise: batch tlb flushes for MADV_DONTNEED
and MADV_FREE" from SeongJae Park optimizes process_madvise()'s TLB
flushing. Instead of flushing each address range in the provided iovec,
we batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- The 6 patch series "Track node vacancy to reduce worst case allocation
counts" from Sidhartha Kumar makes the maple tree smarter about its node
preallocation. stress-ng mmap performance increased by single-digit
percentages and the amount of unnecessarily preallocated memory was
dramaticelly reduced.
- The 3 patch series "mm/gup: Minor fix, cleanup and improvements" from
Baoquan He removes a few unnecessary things which Baoquan noted when
reading the code.
- The 3 patch series ""Enhance sysfs handling for memory hotplug in
weighted interleave" from Rakie Kim "enhances the weighted interleave
policy in the memory management subsystem by improving sysfs handling,
fixing memory leaks, and introducing dynamic sysfs updates for memory
hotplug support". Fixes things on error paths which we are unlikely to
hit.
- The 7 patch series "mm/damon: auto-tune DAMOS for NUMA setups
including tiered memory" from SeongJae Park introduces new DAMOS quota
goal metrics which eliminate the manual tuning which is required when
utilizing DAMON for memory tiering.
- The 5 patch series "mm/vmalloc.c: code cleanup and improvements" from
Baoquan He provides cleanups and small efficiency improvements which
Baoquan found via code inspection.
- The 2 patch series "vmscan: enforce mems_effective during demotion"
from Gregory Price "changes reclaim to respect cpuset.mems_effective
during demotion when possible". because "presently, reclaim explicitly
ignores cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated." "This is useful for isolating workloads on a
multi-tenant system from certain classes of memory more consistently."
- The 2 patch series ""Clean up split_huge_pmd_locked() and remove
unnecessary folio pointers" from Gavin Guo provides minor cleanups and
efficiency gains in in the huge page splitting and migrating code.
- The 3 patch series "Use kmem_cache for memcg alloc" from Huan Yang
creates a slab cache for `struct mem_cgroup', yielding improved memory
utilization.
- The 4 patch series "add max arg to swappiness in memory.reclaim and
lru_gen" from Zhongkun He adds a new "max" argument to the "swappiness="
argument for memory.reclaim MGLRU's lru_gen. This directs proactive
reclaim to reclaim from only anon folios rather than file-backed folios.
- The 17 patch series "kexec: introduce Kexec HandOver (KHO)" from Mike
Rapoport is the first step on the path to permitting the kernel to
maintain existing VMs while replacing the host kernel via file-based
kexec. At this time only memblock's reserve_mem is preserved.
- The 7 patch series "mm: Introduce for_each_valid_pfn()" from David
Woodhouse provides and uses a smarter way of looping over a pfn range.
By skipping ranges of invalid pfns.
- The 2 patch series "sched/numa: Skip VMA scanning on memory pinned to
one NUMA node via cpuset.mems" from Libo Chen removes a lot of pointless
VMA scanning when a task is pinned a single NUMA mode. Dramatic
performance benefits were seen in some real world cases.
- The 2 patch series "JFS: Implement migrate_folio for
jfs_metapage_aops" from Shivank Garg addresses a warning which occurs
during memory compaction when using JFS.
- The 4 patch series "move all VMA allocation, freeing and duplication
logic to mm" from Lorenzo Stoakes moves some VMA code from kernel/fork.c
into the more appropriate mm/vma.c.
- The 6 patch series "mm, swap: clean up swap cache mapping helper" from
Kairui Song provides code consolidation and cleanups related to the
folio_index() function.
- The 2 patch series "mm/gup: Cleanup memfd_pin_folios()" from Vishal
Moola does that.
- The 8 patch series "memcg: Fix test_memcg_min/low test failures" from
Waiman Long addresses some bogus failures which are being reported by
the test_memcontrol selftest.
- The 3 patch series "eliminate mmap() retry merge, add .mmap_prepare
hook" from Lorenzo Stoakes commences the deprecation of
file_operations.mmap() in favor of the new
file_operations.mmap_prepare(). The latter is more restrictive and
prevents drivers from messing with things in ways which, amongst other
problems, may defeat VMA merging.
- The 4 patch series "memcg: decouple memcg and objcg stocks"" from
Shakeel Butt decouples the per-cpu memcg charge cache from the objcg's
one. This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- The 6 patch series "mm/damon: minor fixups and improvements for code,
tests, and documents" from SeongJae Park is "yet another batch of
miscellaneous DAMON changes. Fix and improve minor problems in code,
tests and documents."
- The 7 patch series "memcg: make memcg stats irq safe" from Shakeel
Butt converts memcg stats to be irq safe. Another step along the way to
making memcg charging and stats updates NMI-safe, a BPF requirement.
- The 4 patch series "Let unmap_hugepage_range() and several related
functions take folio instead of page" from Fan Ni provides folio
conversions in the hugetlb code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaDt5qgAKCRDdBJ7gKXxA
ju6XAP9nTiSfRz8Cz1n5LJZpFKEGzLpSihCYyR6P3o1L9oe3mwEAlZ5+XAwk2I5x
Qqb/UGMEpilyre1PayQqOnct3aSL9Ao=
=tYYm
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "Add folio_mk_pte()" from Matthew Wilcox simplifies the act of
creating a pte which addresses the first page in a folio and reduces
the amount of plumbing which architecture must implement to provide
this.
- "Misc folio patches for 6.16" from Matthew Wilcox is a shower of
largely unrelated folio infrastructure changes which clean things up
and better prepare us for future work.
- "memory,x86,acpi: hotplug memory alignment advisement" from Gregory
Price adds early-init code to prevent x86 from leaving physical
memory unused when physical address regions are not aligned to memory
block size.
- "mm/compaction: allow more aggressive proactive compaction" from
Michal Clapinski provides some tuning of the (sadly, hard-coded (more
sadly, not auto-tuned)) thresholds for our invokation of proactive
compaction. In a simple test case, the reduction of a guest VM's
memory consumption was dramatic.
- "Minor cleanups and improvements to swap freeing code" from Kemeng
Shi provides some code cleaups and a small efficiency improvement to
this part of our swap handling code.
- "ptrace: introduce PTRACE_SET_SYSCALL_INFO API" from Dmitry Levin
adds the ability for a ptracer to modify syscalls arguments. At this
time we can alter only "system call information that are used by
strace system call tampering, namely, syscall number, syscall
arguments, and syscall return value.
This series should have been incorporated into mm.git's "non-MM"
branch, but I goofed.
- "fs/proc: extend the PAGEMAP_SCAN ioctl to report guard regions" from
Andrei Vagin extends the info returned by the PAGEMAP_SCAN ioctl
against /proc/pid/pagemap. This permits CRIU to more efficiently get
at the info about guard regions.
- "Fix parameter passed to page_mapcount_is_type()" from Gavin Shan
implements that fix. No runtime effect is expected because
validate_page_before_insert() happens to fix up this error.
- "kernel/events/uprobes: uprobe_write_opcode() rewrite" from David
Hildenbrand basically brings uprobe text poking into the current
decade. Remove a bunch of hand-rolled implementation in favor of
using more current facilities.
- "mm/ptdump: Drop assumption that pxd_val() is u64" from Anshuman
Khandual provides enhancements and generalizations to the pte dumping
code. This might be needed when 128-bit Page Table Descriptors are
enabled for ARM.
- "Always call constructor for kernel page tables" from Kevin Brodsky
ensures that the ctor/dtor is always called for kernel pgtables, as
it already is for user pgtables.
This permits the addition of more functionality such as "insert hooks
to protect page tables". This change does result in various
architectures performing unnecesary work, but this is fixed up where
it is anticipated to occur.
- "Rust support for mm_struct, vm_area_struct, and mmap" from Alice
Ryhl adds plumbing to permit Rust access to core MM structures.
- "fix incorrectly disallowed anonymous VMA merges" from Lorenzo
Stoakes takes advantage of some VMA merging opportunities which we've
been missing for 15 years.
- "mm/madvise: batch tlb flushes for MADV_DONTNEED and MADV_FREE" from
SeongJae Park optimizes process_madvise()'s TLB flushing.
Instead of flushing each address range in the provided iovec, we
batch the flushing across all the iovec entries. The syscall's cost
was approximately halved with a microbenchmark which was designed to
load this particular operation.
- "Track node vacancy to reduce worst case allocation counts" from
Sidhartha Kumar makes the maple tree smarter about its node
preallocation.
stress-ng mmap performance increased by single-digit percentages and
the amount of unnecessarily preallocated memory was dramaticelly
reduced.
- "mm/gup: Minor fix, cleanup and improvements" from Baoquan He removes
a few unnecessary things which Baoquan noted when reading the code.
- ""Enhance sysfs handling for memory hotplug in weighted interleave"
from Rakie Kim "enhances the weighted interleave policy in the memory
management subsystem by improving sysfs handling, fixing memory
leaks, and introducing dynamic sysfs updates for memory hotplug
support". Fixes things on error paths which we are unlikely to hit.
- "mm/damon: auto-tune DAMOS for NUMA setups including tiered memory"
from SeongJae Park introduces new DAMOS quota goal metrics which
eliminate the manual tuning which is required when utilizing DAMON
for memory tiering.
- "mm/vmalloc.c: code cleanup and improvements" from Baoquan He
provides cleanups and small efficiency improvements which Baoquan
found via code inspection.
- "vmscan: enforce mems_effective during demotion" from Gregory Price
changes reclaim to respect cpuset.mems_effective during demotion when
possible. because presently, reclaim explicitly ignores
cpuset.mems_effective when demoting, which may cause the cpuset
settings to violated.
This is useful for isolating workloads on a multi-tenant system from
certain classes of memory more consistently.
- "Clean up split_huge_pmd_locked() and remove unnecessary folio
pointers" from Gavin Guo provides minor cleanups and efficiency gains
in in the huge page splitting and migrating code.
- "Use kmem_cache for memcg alloc" from Huan Yang creates a slab cache
for `struct mem_cgroup', yielding improved memory utilization.
- "add max arg to swappiness in memory.reclaim and lru_gen" from
Zhongkun He adds a new "max" argument to the "swappiness=" argument
for memory.reclaim MGLRU's lru_gen.
This directs proactive reclaim to reclaim from only anon folios
rather than file-backed folios.
- "kexec: introduce Kexec HandOver (KHO)" from Mike Rapoport is the
first step on the path to permitting the kernel to maintain existing
VMs while replacing the host kernel via file-based kexec. At this
time only memblock's reserve_mem is preserved.
- "mm: Introduce for_each_valid_pfn()" from David Woodhouse provides
and uses a smarter way of looping over a pfn range. By skipping
ranges of invalid pfns.
- "sched/numa: Skip VMA scanning on memory pinned to one NUMA node via
cpuset.mems" from Libo Chen removes a lot of pointless VMA scanning
when a task is pinned a single NUMA mode.
Dramatic performance benefits were seen in some real world cases.
- "JFS: Implement migrate_folio for jfs_metapage_aops" from Shivank
Garg addresses a warning which occurs during memory compaction when
using JFS.
- "move all VMA allocation, freeing and duplication logic to mm" from
Lorenzo Stoakes moves some VMA code from kernel/fork.c into the more
appropriate mm/vma.c.
- "mm, swap: clean up swap cache mapping helper" from Kairui Song
provides code consolidation and cleanups related to the folio_index()
function.
- "mm/gup: Cleanup memfd_pin_folios()" from Vishal Moola does that.
- "memcg: Fix test_memcg_min/low test failures" from Waiman Long
addresses some bogus failures which are being reported by the
test_memcontrol selftest.
- "eliminate mmap() retry merge, add .mmap_prepare hook" from Lorenzo
Stoakes commences the deprecation of file_operations.mmap() in favor
of the new file_operations.mmap_prepare().
The latter is more restrictive and prevents drivers from messing with
things in ways which, amongst other problems, may defeat VMA merging.
- "memcg: decouple memcg and objcg stocks"" from Shakeel Butt decouples
the per-cpu memcg charge cache from the objcg's one.
This is a step along the way to making memcg and objcg charging
NMI-safe, which is a BPF requirement.
- "mm/damon: minor fixups and improvements for code, tests, and
documents" from SeongJae Park is yet another batch of miscellaneous
DAMON changes. Fix and improve minor problems in code, tests and
documents.
- "memcg: make memcg stats irq safe" from Shakeel Butt converts memcg
stats to be irq safe. Another step along the way to making memcg
charging and stats updates NMI-safe, a BPF requirement.
- "Let unmap_hugepage_range() and several related functions take folio
instead of page" from Fan Ni provides folio conversions in the
hugetlb code.
* tag 'mm-stable-2025-05-31-14-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (285 commits)
mm: pcp: increase pcp->free_count threshold to trigger free_high
mm/hugetlb: convert use of struct page to folio in __unmap_hugepage_range()
mm/hugetlb: refactor __unmap_hugepage_range() to take folio instead of page
mm/hugetlb: refactor unmap_hugepage_range() to take folio instead of page
mm/hugetlb: pass folio instead of page to unmap_ref_private()
memcg: objcg stock trylock without irq disabling
memcg: no stock lock for cpu hot-unplug
memcg: make __mod_memcg_lruvec_state re-entrant safe against irqs
memcg: make count_memcg_events re-entrant safe against irqs
memcg: make mod_memcg_state re-entrant safe against irqs
memcg: move preempt disable to callers of memcg_rstat_updated
memcg: memcg_rstat_updated re-entrant safe against irqs
mm: khugepaged: decouple SHMEM and file folios' collapse
selftests/eventfd: correct test name and improve messages
alloc_tag: check mem_profiling_support in alloc_tag_init
Docs/damon: update titles and brief introductions to explain DAMOS
selftests/damon/_damon_sysfs: read tried regions directories in order
mm/damon/tests/core-kunit: add a test for damos_set_filters_default_reject()
mm/damon/paddr: remove unused variable, folio_list, in damon_pa_stat()
mm/damon/sysfs-schemes: fix wrong comment on damons_sysfs_quota_goal_metric_strs
...
Add a new test_stress_06 for the per io daemons feature. This is just a
copy of test_stress_01 with the per_io_tasks flag added, with varying
amounts of nthreads. This test is able to reproduce a panic which was
caught manually during development [1]; in the current version of this
patch set, it passes.
Note that this commit also makes all stress tests using the
run_io_and_remove helper more stressful by additionally exercising the
batch submit (queue_rqs) path.
[1] https://lore.kernel.org/linux-block/aDgwGoGCEpwd1mFY@fedora/
Suggested-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-8-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new test test_generic_12 which:
- sets up a ublk server with per_io_tasks and a different number of ublk
server threads and ublk_queues. This is possible now that these
objects are decoupled
- runs some I/O load from a single CPU
- verifies that all the ublk server threads handle some I/O
Before this changeset, this test fails, since I/O issued from one CPU is
always handled by the one ublk server thread. After this changeset, the
test passes.
In the future, the last check above may be strengthened to "verify that
all ublk server threads handle the same amount of I/O." However, this
requires some adjustments/bugfixes to tag allocation, so this work is
postponed to a followup.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-7-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support in kublk for decoupled ublk_queues and ublk server threads.
kublk now has two modes of operation:
- (preexisting mode) threads and queues are paired 1:1, and each thread
services all the I/Os of one queue
- (new mode) thread and queue counts are independently configurable.
threads service I/Os in a way that balances load across threads even
if load is not balanced over queues.
The default is the preexisting mode. The new mode is activated by
passing the --per_io_tasks flag.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-6-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Towards the goal of decoupling ublk_queues from ublk server threads,
move resources/data that should be per-thread rather than per-queue out
of ublk_queue and into a new struct ublk_thread.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-5-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, each ublk server I/O handler thread initializes its own
queue. However, as we move towards decoupled ublk_queues and ublk server
threads, this model does not make sense anymore, as there will no longer
be a concept of a thread having "its own" queue. So lift queue
initialization out of the per-thread ublk_io_handler_fn and into a loop
in ublk_start_daemon (which runs once for each device).
There is a part of ublk_queue_init (ring initialization) which does
actually need to happen on the thread that will use the ring; that is
separated into a separate ublk_thread_init which is still called by each
I/O handler thread.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-4-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We currently have a helper ublk_queue_alloc_sqes which the ublk targets
use to allocate SQEs for their own operations. However, as we move
towards decoupled ublk_queues and ublk server threads, this helper does
not make sense anymore. SQEs are allocated from rings, and we will have
one ring per thread to avoid locking. Change the SQE allocation helper
to ublk_io_alloc_sqes. Currently this still allocates SQEs from the io's
queue's ring, but when we fully decouple threads and queues, it will
allocate from the io's thread's ring instead.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-3-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, when we process CQEs, we know which ublk_queue we are working
on because we know which ring we are working on, and ublk_queues and
rings are in 1:1 correspondence. However, as we decouple ublk_queues
from ublk server threads, ublk_queues and rings will no longer be in 1:1
correspondence - each ublk server thread will have a ring, and each
thread may issue commands against more than one ublk_queue. So in order
to know which ublk_queue a CQE refers to, plumb that information in the
associated SQE's user_data.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250529-ublk_task_per_io-v8-2-e9d3b119336a@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The newly added anon_inode_test test fails to build due to attempting to
include a nonexisting overlayfs/wrapper.h:
anon_inode_test.c:10:10: fatal error: overlayfs/wrappers.h: No such file or directory
10 | #include "overlayfs/wrappers.h"
| ^~~~~~~~~~~~~~~~~~~~~~
This is due to 0bd92b9fe5 ("selftests/filesystems: move wrapper.h out
of overlayfs subdir") which was added in the vfs-6.16.selftests branch
which was based on -rc5 and did not contain the newly added test so once
things were merged into mainline the build started failing - both parent
commits are fine.
Fixes: 3e406741b1 ("Merge tag 'vfs-6.16-rc1.selftests' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address is
in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to point
to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the fields
directly, have the fields for preempt off and irqs off events still show
the function name (via kallsyms) instead of just showing the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold this
information and have a separate location for each context level (thread,
softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a "subops"
that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that calls
the subops functions, also show the subops functions that will get called
for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write into,
but the old tooling has the top level instance hardcoded into the
application. New tools want to consume the data from an instance and not
the top level buffer. By adding a copy_trace_marker option, whenever the
top instance trace_marker is written into, a copy of it is also written
into the instance with this option set. This allows new tools to read what
old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written into
the trace_marker is not written into the top instance. This is a way to
redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of TRACE_EVENT(),
then it will not be exposed via tracefs. Currently there's no way to
differentiate in the kernel the tracepoint functions between those that
are exposed via tracefs or not. A calling convention has been made
manually to append a "_tp" prefix for events created by DECLARE_TRACE().
Instead of doing this manually, force it so that all DECLARE_TRACE()
events have this notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if these
events are parsed by user space it they may break, and the event may have
to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph event is
signed due to -1 being used for end of boundary. What actually gets
recorded in the event itself is zero or positive. Reflect this to user
space by showing "depth" as unsigned int and be consistent across all
events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a machine
has 256 CPUs, and the filter is to filter every other CPU, the write would
take a string larger than 256 bytes. Instead of using a fixed size buffer
on the stack that is 256 bytes, allocate it to handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace functions
is checked to know if tracing has been disabled or not. This flag was
added back in 2008 before the ring buffer had its own way to disable
tracing. The "disable" flag is now not always set when needed, and the
ring buffer flag should be used in all locations where the disabled is
needed. Since the "disable" flag is redundant and incorrect, stop using it.
Fix up some locations that use the "disable" flag to use the ring buffer
info.
- Use a new tracer_tracing_disable/enable() instead of data->disable flag
There's a few cases that set the data->disable flag to stop tracing, but
this flag is not consistently used. It is also an on/off switch where if a
function set it and calls another function that sets it, the called
function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that uses a
counter and can be nested. These use the ring buffer flags which are
always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer and set
it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaDhiqRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qkheAQDpyRHoXF1AIoEqyahDax8f3vpZQeCH
B/mn+YJmU1wuVgEA7AFALov5SHKv4IzoARz68GXtR0jGhP5D8uebUhUqDAQ=
=WmFG
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
* Add large stage-2 mapping (THP) support for non-protected guests when
pKVM is enabled, clawing back some performance.
* Enable nested virtualisation support on systems that support it,
though it is disabled by default.
* Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
* Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is automatically
extracted from the published JSON files), and helps dealing with the
evolution of the architecture.
* Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
* New selftest checking the pKVM ownership transition rules
* Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
* Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
* Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
* Add a new selftest for the SVE host state being corrupted by a
guest.
* Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
* Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
* Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
* and the usual random cleanups.
LoongArch:
* Don't flush tlb if the host supports hardware page table walks.
* Add KVM selftests support.
RISC-V:
* Add vector registers to get-reg-list selftest
* VCPU reset related improvements
* Remove scounteren initialization from VCPU reset
* Support VCPU reset from userspace using set_mpstate() ioctl
x86:
* Initial support for TDX in KVM. This finally makes it possible to use the
TDX module to run confidential guests on Intel processors. This is quite a
large series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some TDVMCALLs
to userspace, and handling several special VM exits from the TDX module.
This has been in the works for literally years and it's not really possible
to describe everything here, so I'll defer to the various merge commits
up to and including commit 7bcf7246c4 ("Merge branch 'kvm-tdx-finish-initial'
into HEAD").
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmg02hwUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNnkwf/db4xeWKSMseCIvBVR+ObDn3LXhwT
hAgmTkDkP1zq9RfbfJSbUA1DXRwfP+f1sWySLMWECkFEQW9fGIJF9fOQRDSXKmhX
158U3+FEt+3jxLRCGFd4zyXAqyY3C8JSkPUyJZxCpUbXtB5tdDNac4rZAXKDULwe
sUi0OW/kFDM2yt369pBGQAGdN+75/oOrYISGOSvMXHxjccNqvveX8MUhpBjYIuuj
73iBWmsfv3vCtam56Racz3C3v44ie498PmWFtnB0R+CVfWfrnUAaRiGWx+egLiBW
dBPDiZywMn++prmphEUFgaStDTQy23JBLJ8+RvHkp+o5GaTISKJB3nedZQ==
=adZU
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"As far as x86 goes this pull request "only" includes TDX host support.
Quotes are appropriate because (at 6k lines and 100+ commits) it is
much bigger than the rest, which will come later this week and
consists mostly of bugfixes and selftests. s390 changes will also come
in the second batch.
ARM:
- Add large stage-2 mapping (THP) support for non-protected guests
when pKVM is enabled, clawing back some performance.
- Enable nested virtualisation support on systems that support it,
though it is disabled by default.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE
and protected modes.
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. While this has no functional
impact, it ensures correctness of emulation (the data is
automatically extracted from the published JSON files), and helps
dealing with the evolution of the architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
LoongArch:
- Don't flush tlb if the host supports hardware page table walks.
- Add KVM selftests support.
RISC-V:
- Add vector registers to get-reg-list selftest
- VCPU reset related improvements
- Remove scounteren initialization from VCPU reset
- Support VCPU reset from userspace using set_mpstate() ioctl
x86:
- Initial support for TDX in KVM.
This finally makes it possible to use the TDX module to run
confidential guests on Intel processors. This is quite a large
series, including support for private page tables (managed by the
TDX module and mirrored in KVM for efficiency), forwarding some
TDVMCALLs to userspace, and handling several special VM exits from
the TDX module.
This has been in the works for literally years and it's not really
possible to describe everything here, so I'll defer to the various
merge commits up to and including commit 7bcf7246c4 ('Merge
branch 'kvm-tdx-finish-initial' into HEAD')"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (248 commits)
x86/tdx: mark tdh_vp_enter() as __flatten
Documentation: virt/kvm: remove unreferenced footnote
RISC-V: KVM: lock the correct mp_state during reset
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: np-guest CMOs with PMD_SIZE fixmap
KVM: arm64: Stage-2 huge mappings for np-guests
KVM: arm64: Add a range to pkvm_mappings
KVM: arm64: Convert pkvm_mappings to interval tree
KVM: arm64: Add a range to __pkvm_host_test_clear_young_guest()
KVM: arm64: Add a range to __pkvm_host_wrprotect_guest()
KVM: arm64: Add a range to __pkvm_host_unshare_guest()
KVM: arm64: Add a range to __pkvm_host_share_guest()
KVM: arm64: Introduce for_each_hyp_page
KVM: arm64: Handle huge mappings for np-guest CMOs
KVM: arm64: nv: Release faulted-in VNCR page from mmu_lock critical section
KVM: arm64: nv: Handle TLBI S1E2 for VNCR invalidation with mmu_lock held
KVM: arm64: nv: Hold mmu_lock when invalidating VNCR SW-TLB before translating
RISC-V: KVM: add KVM_CAP_RISCV_MP_STATE_RESET
RISC-V: KVM: Remove scounteren initialization
KVM: RISC-V: remove unnecessary SBI reset state
...
-----BEGIN PGP SIGNATURE-----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=j3t8
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
Core
----
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing
again the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter
---------
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools
still use this interface.
- Implement support for wildcard netdevice in netdev basechain
and flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF
---
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols
---------
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the single
flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API
----------
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling
-----------------
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers
----------------------
- OpenVPN virtual driver: offload OpenVPN data channels processing
to the kernel-space, increasing the data transfer throughput WRT
the user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers
-------
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the stearing table handling to reduce significantly
the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmg3D64SHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkcIsQAK2eEc+BxQer975wzvtMg6gF9eoex4a+
rZ7jxfDzDtNvTauoQsrpehDZp0FnySaVGCU36lHGB2OvDnhCpPc5hXzKDWQpOuqQ
SHrGG3/6FTbdTG/HfHUcbNyrUzIf53SADSObiQ3qg4gyEQ3sCpcOKtVtMcU8rvsY
/HqMnsJWFaROUMjMtCcnUSgjmeY9kBvha3sTXUqgeRugEOCvZD7z4rpqFIcQqHw7
e2Fi8dwIXEYNxqPp6MRq2qdyUTewCRruE8ZIMAFuhtfYeMElUZMPlqlMENX3AzTQ
cr0EgwcFOUxRA7oZRxhoBNBsVXavtSpQr4ZDoWplxP4aQ37n5tc1E9Q72axpB/Og
FbJRl6GvWYnCd8071BczgmfHlKaTAigPvt2Z4r6JjM5I/Bij/IZ3k+On1OTuOAj/
EqfFkdZ0a5cfKrwUMP+oSGtSAywkMVUtnIKJlZeRbjSj2432sCfe2jVAlS8ELM43
3LUgXYrAKtA87g171LlsRu5EEpI5QmqPb+i5LpPlEXe2TJEgPisyfecJ3NafF/2+
j575lm+TFNm9NTNhGGjDPEvw0djI5wSGGMe9J4gC74eWi6s5t6C4cuUf84TKWdwR
x+9H0IB7rfFncAwXHJuUUtzd+fPHaYzs5dDGbSgMQOXr1cr1wlubCK8mQ1r/Wt/a
3GjFIOQKW2Q5
=t/Tz
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree.
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls.
- Fix a node refcount imbalance in the PSCI device-tree code.
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4.
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM guests
can reliably query the underlying CPU types from the VMM.
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code.
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected.
Memory management:
- Prevent BSS exports from being used by the early PI code.
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries.
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible.
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end of
the mapping operation.
- Extend mmap() randomisation for 52-bit virtual addresses (on par with
48-bit addressing) and remove limited support for randomisation of
the linear map.
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI.
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers.
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support.
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location.
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function.
Miscellaneous:
- Add some missing header inclusions to the CCA headers.
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical).
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree blob.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmg1uTgQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNFv2CAC9S5OW0btOAo7V/LFBpLhJM3hdIV6Sn6N1
d/K5znuqPBG6VPfBrshaZltEl/C3U8KG4H8xrlX5cSo7CRuf3DgVBw3kiZ6ERZj6
1gnKR54juA1oWhcroPl0s76ETWj3N4gO036u2qOhWNAYflDunh1+bCIGJkG4H/yP
wqtWn974YUbad/zQJSbG3IMO1yvxZ/PsNpVF8HjyQ0/ZPWsYTscrhNQ0hWro17sR
CTcUaGxH4GrXW24EGNgkLB9aq67X2rtGGtaIlp5oFl8FuLklc7TYbPwJp8cPCTNm
0Sp0mpuR9M675pYIKoCI9m5twc46znRIKmbXi5LvPd77418y3jTf
=03N4
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"The headline feature is the re-enablement of support for Arm's
Scalable Matrix Extension (SME) thanks to a bumper crop of fixes
from Mark Rutland.
If matrices aren't your thing, then Ryan's page-table optimisation
work is much more interesting.
Summary:
ACPI, EFI and PSCI:
- Decouple Arm's "Software Delegated Exception Interface" (SDEI)
support from the ACPI GHES code so that it can be used by platforms
booted with device-tree
- Remove unnecessary per-CPU tracking of the FPSIMD state across EFI
runtime calls
- Fix a node refcount imbalance in the PSCI device-tree code
CPU Features:
- Ensure register sanitisation is applied to fields in ID_AA64MMFR4
- Expose AIDR_EL1 to userspace via sysfs, primarily so that KVM
guests can reliably query the underlying CPU types from the VMM
- Re-enabling of SME support (CONFIG_ARM64_SME) as a result of fixes
to our context-switching, signal handling and ptrace code
Entry code:
- Hook up TIF_NEED_RESCHED_LAZY so that CONFIG_PREEMPT_LAZY can be
selected
Memory management:
- Prevent BSS exports from being used by the early PI code
- Propagate level and stride information to the low-level TLB
invalidation routines when operating on hugetlb entries
- Use the page-table contiguous hint for vmap() mappings with
VM_ALLOW_HUGE_VMAP where possible
- Optimise vmalloc()/vmap() page-table updates to use "lazy MMU mode"
and hook this up on arm64 so that the trailing DSB (used to publish
the updates to the hardware walker) can be deferred until the end
of the mapping operation
- Extend mmap() randomisation for 52-bit virtual addresses (on par
with 48-bit addressing) and remove limited support for
randomisation of the linear map
Perf and PMUs:
- Add support for probing the CMN-S3 driver using ACPI
- Minor driver fixes to the CMN, Arm-NI and amlogic PMU drivers
Selftests:
- Fix FPSIMD and SME tests to align with the freshly re-enabled SME
support
- Fix default setting of the OUTPUT variable so that tests are
installed in the right location
vDSO:
- Replace raw counter access from inline assembly code with a call to
the the __arch_counter_get_cntvct() helper function
Miscellaneous:
- Add some missing header inclusions to the CCA headers
- Rework rendering of /proc/cpuinfo to follow the x86-approach and
avoid repeated buffer expansion (the user-visible format remains
identical)
- Remove redundant selection of CONFIG_CRC32
- Extend early error message when failing to map the device-tree
blob"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: cputype: Add cputype definition for HIP12
arm64: el2_setup.h: Make __init_el2_fgt labels consistent, again
perf/arm-cmn: Add CMN S3 ACPI binding
arm64/boot: Disallow BSS exports to startup code
arm64/boot: Move global CPU override variables out of BSS
arm64/boot: Move init_pgdir[] and init_idmap_pgdir[] into __pi_ namespace
perf/arm-cmn: Initialise cmn->cpu earlier
kselftest/arm64: Set default OUTPUT path when undefined
arm64: Update comment regarding values in __boot_cpu_mode
arm64: mm: Drop redundant check in pmd_trans_huge()
arm64/mm: Re-organise setting up FEAT_S1PIE registers PIRE0_EL1 and PIR_EL1
arm64/mm: Permit lazy_mmu_mode to be nested
arm64/mm: Disable barrier batching in interrupt contexts
arm64/cpuinfo: only show one cpu's info in c_show()
arm64/mm: Batch barriers when updating kernel mappings
mm/vmalloc: Enter lazy mmu mode while manipulating vmalloc ptes
arm64/mm: Support huge pte-mapped pages in vmap
mm/vmalloc: Gracefully unmap huge ptes
mm/vmalloc: Warn on improper use of vunmap_range()
arm64/mm: Hoist barriers out of set_ptes_anysz() loop
...
The script is supposed to skip wildcard interface testing if unsupported
by the host's nft tool. The failing check caused script abort due to
'set -e' though. Fix this by running the potentially failing nft command
inside the if-conditional pipe.
Fixes: 73db1b5dab ("selftests: netfilter: Torture nftables netdev hooks")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://patch.msgid.link/20250527094117.18589-1-phil@nwl.cc
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reproduce the UAF scenario where netem is a child of HFSC and HFSC
is configured to use the eltree. In such case, this TDC test would
cause the HFSC class to be added to the eltree twice resulting
in a UAF.
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Pedro Tammela <pctammela@mojatatu.com>
Link: https://patch.msgid.link/20250522181448.1439717-3-pctammela@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- More in-kernel idle CPU selection improvements. Expand topology awareness
coverage add scx_bpf_select_cpu_and() to allow more flexibility. The idle
CPU selection kfuncs can now be called from unlocked contexts too.
- A bunch of reorganization changes to lay the foundation for multiple
hierarchical scheduler support. This isn't ready yet and the included
changes don't make meaningful behavior differences. One notable change is
replacing some static_key tests with dynamic tests as the test results may
differ depending on the scheduler instance. This isn't expected to cause
meaningful performance difference.
- Other minor and doc updates.
- There were multiple patches in for-6.15-fixes which conflicted with
changes in for-6.16. for-6.15-fixes were pulled three times into for-6.16
to resolve the conflicts.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaDYZMw4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGfbcAQDRloVb/d5RfC6VYlue9EV1jHuoJefTYHvR3jmO
ju70EQEAjLBXw58XAePQ9La/570JELgsC5FzJp3tLTilGx2JyQA=
=7cDG
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- More in-kernel idle CPU selection improvements. Expand topology
awareness coverage add scx_bpf_select_cpu_and() to allow more
flexibility. The idle CPU selection kfuncs can now be called from
unlocked contexts too.
- A bunch of reorganization changes to lay the foundation for multiple
hierarchical scheduler support. This isn't ready yet and the included
changes don't make meaningful behavior differences. One notable
change is replacing some static_key tests with dynamic tests as the
test results may differ depending on the scheduler instance. This
isn't expected to cause meaningful performance difference.
- Other minor and doc updates.
- There were multiple patches in for-6.15-fixes which conflicted with
changes in for-6.16. for-6.15-fixes were pulled three times into
for-6.16 to resolve the conflicts.
* tag 'sched_ext-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (49 commits)
sched_ext: Call ops.update_idle() after updating builtin idle bits
sched_ext, docs: convert mentions of "CFS" to "fair-class scheduler"
selftests/sched_ext: Update test enq_select_cpu_fails
sched_ext: idle: Consolidate default idle CPU selection kfuncs
selftests/sched_ext: Add test for scx_bpf_select_cpu_and() via test_run
sched_ext: idle: Allow scx_bpf_select_cpu_and() from unlocked context
sched_ext: idle: Validate locking correctness in scx_bpf_select_cpu_and()
sched_ext: Make scx_kf_allowed_if_unlocked() available outside ext.c
sched_ext, docs: add label
sched_ext: Explain the temporary situation around scx_root dereferences
sched_ext: Add @sch to SCX_CALL_OP*()
sched_ext: Cleanup [__]scx_exit/error*()
sched_ext: Add @sch to SCX_CALL_OP*()
sched_ext: Clean up scx_root usages
Documentation: scheduler: Changed lowercase acronyms to uppercase
sched_ext: Avoid NULL scx_root deref in __scx_exit()
sched_ext: Add RCU protection to scx_root in DSQ iterator
sched_ext: Clean up SCX_EXIT_NONE handling in scx_disable_workfn()
sched_ext: Move disable machinery into scx_sched
sched_ext: Move event_stats_cpu into scx_sched
...
- cgroup rstat shared the tracking tree across all controlers with the
rationale being that a cgroup which is using one resource is likely to be
using other resources at the same time (ie. if something is allocating
memory, it's probably consuming CPU cycles). However, this turned out to
not scale very well especially with memcg using rstat for internal
operations which made memcg stat read and flush patterns substantially
different from other controllers. JP Kobryn split the rstat tree per
controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can be
added easily. The two of the patches which implement this are mislabeled
as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates.
- Documentation updates.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCaDYUmA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGRhbAP90v8QwUkWEKGQSam8JY3by7PvrW6pV5ot+BGuM
4xu3BAEAjsJ9FdiwYLwKYqG7y59xhhBFOo6GpcP52kPp3znl+QQ=
=6MIT
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup updates from Tejun Heo:
- cgroup rstat shared the tracking tree across all controllers with the
rationale being that a cgroup which is using one resource is likely
to be using other resources at the same time (ie. if something is
allocating memory, it's probably consuming CPU cycles).
However, this turned out to not scale very well especially with memcg
using rstat for internal operations which made memcg stat read and
flush patterns substantially different from other controllers. JP
Kobryn split the rstat tree per controller.
- cgroup BPF support was hooking into cgroup init/exit paths directly.
Convert them to use a notifier chain instead so that other usages can
be added easily. The two of the patches which implement this are
mislabeled as belonging to sched_ext instead of cgroup. Sorry.
- Relatively minor cpuset updates
- Documentation updates
* tag 'cgroup-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (23 commits)
sched_ext: Convert cgroup BPF support to use cgroup_lifetime_notifier
sched_ext: Introduce cgroup_lifetime_notifier
cgroup: Minor reorganization of cgroup_create()
cgroup, docs: cpu controller's interaction with various scheduling policies
cgroup, docs: convert space indentation to tab indentation
cgroup: avoid per-cpu allocation of size zero rstat cpu locks
cgroup, docs: be specific about bandwidth control of rt processes
cgroup: document the rstat per-cpu initialization
cgroup: helper for checking rstat participation of css
cgroup: use subsystem-specific rstat locks to avoid contention
cgroup: use separate rstat trees for each subsystem
cgroup: compare css to cgroup::self in helper for distingushing css
cgroup: warn on rstat usage by early init subsystems
cgroup/cpuset: drop useless cpumask_empty() in compute_effective_exclusive_cpumask()
cgroup/rstat: Improve cgroup_rstat_push_children() documentation
cgroup: fix goto ordering in cgroup_init()
cgroup: fix pointer check in css_rstat_init()
cgroup/cpuset: Add warnings to catch inconsistency in exclusive CPUs
cgroup/cpuset: Fix obsolete comment in cpuset_css_offline()
cgroup/cpuset: Always use cpu_active_mask
...
* Move kern_table members out of kernel/sysctl.c
Moved a subset (tracing, panic, signal, stack_tracer and sparc) out of the
kern_table array. The goal is for kern_table to only have sysctl elements. All
this increases modularity by placing the ctl_tables closer to where they are
used while reducing the chances of merge conflicts in kernel/sysctl.c.
* Fixed sysctl unit test panic by relocating it to selftests
* Testing
These have been in linux-next from rc2, so they have had more than a month
worth of testing.
-----BEGIN PGP SIGNATURE-----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=45X2
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move kern_table members out of kernel/sysctl.c
Moved a subset (tracing, panic, signal, stack_tracer and sparc) out
of the kern_table array. The goal is for kern_table to only have
sysctl elements. All this increases modularity by placing the
ctl_tables closer to where they are used while reducing the chances
of merge conflicts in kernel/sysctl.c.
- Fixed sysctl unit test panic by relocating it to selftests
* tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Close test ctl_headers with a for loop
sysctl: call sysctl tests with a for loop
sysctl: Add 0012 to test the u8 range check
sysctl: move u8 register test to lib/test_sysctl.c
sparc: mv sparc sysctls into their own file under arch/sparc/kernel
stack_tracer: move sysctl registration to kernel/trace/trace_stack.c
tracing: Move trace sysctls into trace.c
signal: Move signal ctl tables into signal.c
panic: Move panic ctl tables into panic.c
The current test just sends "hello\nworld" and verifies that is the
string received on the RX side. That is fine, but improve the test a bit
by sending 1K data. The test should be improved further to send more
data, but for now this should be a welcome improvement.
The test will send a repeating pattern of 0x01, 0x02, ... 0x06. The
ncdevmem `-v 7` flag will verify this pattern. ncdevmem will provide
useful debugging info when the test fails, such as the frags received
and verified fine, and which frag exactly failed, what was the expected
byte pattern, and what is the actual byte pattern received. All this
debug information will be useful when the test fails.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-8-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ncdevmem supports drivers that are limited to either 3-tuple or 5-tuple
FS support, but the ksft is currently 3-tuple only. Support drivers that
have 5-tuple FS supported by adding a ksft arg.
Signed-off-by: Mina Almasry <almasrymina@google.com>
fix 5-tuple
fix 5-tuple
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-7-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This exit_wait seems necessary to make the rx side test pass for me.
I think this is just missed from the original test add patch. Add it now.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-6-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ncdevmem supports both ipv4 and ipv6, but the ksft is currently
ipv6-only. Propagate the ipv4 support to the ksft, so that folks that
are limited to these networks can also test.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250523230524.1107879-5-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni says:
Recently the nipa CI infra went through some tuning, and the mentioned
self-test now often fails.
The failing test is the sctp+nfqueue one, where the file transfer takes
too long and hits the timeout (1 minute).
Because SCTP nfqueue tests had timeout related issues before (esp. on debug
kernels) print the file transfer duration in the PASS/FAIL message.
This would aallow us to see if there is/was an unexpected slowdown
(CI keeps logs around) or 'creeping slowdown' where things got slower
over time until 'fail point' was reached.
Output of altered lines looks like this:
PASS: tcp and nfqueue in forward chan (duration: 2s)
PASS: tcp via loopback (duration: 2s)
PASS: sctp and nfqueue in forward chain (duration: 42s)
PASS: sctp and nfqueue in output chain with GSO (duration: 21s)
Reported-by: Paolo Abeni <pabeni@redhat.com
Closes: https://lore.kernel.org/netdev/584524ef-9fd7-4326-9f1b-693ca62c5692@redhat.com/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250523121700.20011-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function wait_local_port_listen() is the only function defined in
net_helper.sh. Since some tests source both lib.sh and net_helper.sh,
we can simplify the setup by moving wait_local_port_listen() to lib.sh.
With this change, net_helper.sh becomes redundant and can be removed.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250526014600.9128-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where applicable
which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which will
take off the burden from GPIO drivers of checking this down the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter callbacks
- convert more drivers to making the irq_chip immutable as is recommended
by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built with
COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that makes
the setup easier for user-space than the existing driver-level sysfs
attributes and also adds more advanced configuration features (such as
referring to aggregated lines by their original names or modifying
their names as exposed by the aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the global
GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600 (new
drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmg0NtQACgkQEacuoBRx
13Iolg/+P8fe1hTek+UgdKm/EAQ1Mn3oijNE1Ix15VD8Iqacu+URyB2SJMFcg27n
S/tsuwogQeQmdgXPfYDJkQmiZEyln/ytWf5W2lNwYhGfGujVa8h1FueB7Wb8Zs7G
PNMnobyAIGivodJfvikDEyczMuxhkOH04ZOT7UpTSPI47BSGsujX/1vgmRQLid1Z
3wFDJ0yDhVcuxit/VC+LzFpHIV0MiRzGpvHzYid5jjEaGSiRMpHixf27VJGc0gG1
IJLkhNkwZ3InisWVGvqdRg/FUNErRYKYQSARb4AjCU+/y1H0SWdB0R6sZDTZpP+e
YqAc8FW31Lw1L7PWBLRTaVS3KT868tdXDCsArNzfBbb3u/WikO2GY/AXuzveZatp
pHwyPA0JS9QvxaTXU9yjCpGqdNfjbrmU5OkZxTTe+Nyz84fUfiURiE8g4Rl6riy4
fNzaywRBmVZlEECWSWGzyNw9ZEYDRPZ1ZHmOA+8FWE+/XKJIsVf8w3x2QIC5b/HO
hYKH4mar8oiEYJFZqoko3iQURJq+AD9wILCNpws5bSsi//VyyNT0mZV/q5hj7+Xx
pqeEGDInvycN5fDWWJlkN1lj5dDyHZi4uus05mYI9Ec+eX3XNWRUHXUskbpzdgCs
XepjP9kFQmMSL7y4z2d7tLd7gFup/uGny7o/KyMsIPDw7qVL5rY=
=PQqp
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
Add two tests:
- one test has 'rX <op> r10' where rX is not r10, and
- another test has 'rX <op> rY' where rX and rY are not r10
but there is an early insn 'rX = r10'.
Without previous verifier change, both tests will fail.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250524041340.4046304-1-yonghong.song@linux.dev
Highlights:
* New supported architectures: m68k, SPARC (32 and 64 bit)
* Compatibility with kselftest_harness.h
* A more robust mechanism to include all of nolibc from each header
* Split existing features into new headers to simplify adoption
* Compatibility with UBSAN and it is used in the testsuite
* Many small new features focussing on usage in kselftests
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTg4lxklFHAidmUs57B+h1jyw5bOAUCaDTMAgAKCRDB+h1jyw5b
ONycAQD35X+ca33v05Zup3oEne2zZtKqeRlStcFTp2AY03MpngEA46IsX5yBf1Hj
GgsmC/RFGicF9RjaymgdAB5WOg0CeAc=
=tjwV
-----END PGP SIGNATURE-----
Merge tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- New supported architectures: m68k, SPARC (32 and 64 bit)
- Compatibility with kselftest_harness.h
- A more robust mechanism to include all of nolibc from each header
- Split existing features into new headers to simplify adoption
- Compatibility with UBSAN and it is used in the testsuite
- Many small new features focussing on usage in kselftests
* tag 'nolibc-20250526-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (83 commits)
selftests: harness: Stop using setjmp()/longjmp()
selftests: harness: Add "variant" and "self" to test metadata
selftests: harness: Add teardown callback to test metadata
selftests: harness: Move teardown conditional into test metadata
selftests: harness: Don't set setup_completed for fixtureless tests
selftests: harness: Implement test timeouts through pidfd
selftests: harness: Remove dependency on libatomic
selftests: harness: Remove inline qualifier for wrappers
selftests: harness: Mark functions without prototypes static
selftests: harness: Ignore unused variant argument warning
selftests: harness: Use C89 comment style
selftests: harness: Add kselftest harness selftest
selftests/nolibc: drop include guards around standard headers
tools/nolibc: move NULL and offsetof() to sys/stddef.h
tools/nolibc: move uname() and friends to sys/utsname.h
tools/nolibc: move makedev() and friends to sys/sysmacros.h
tools/nolibc: move getrlimit() and friends to sys/resource.h
tools/nolibc: move reboot() to sys/reboot.h
tools/nolibc: move prctl() to sys/prctl.h
tools/nolibc: move mount() to sys/mount.h
...
Now that support for up to 12 args is enabled for tracing programs on
ARM64, enable the existing tests for this feature on this architecture.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20250527-many_args_arm64-v3-2-3faf7bb8e4a2@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add some inline-asm tests and C tests where __bpf_trap() or
__builtin_trap() is used in the code. The __builtin_trap()
test is guarded with llvm21 ([1]) since otherwise the compilation
failure will happen.
[1] https://github.com/llvm/llvm-project/pull/131731
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250523205331.1291734-1-yonghong.song@linux.dev
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use the same test buffers as the traditional iterator and a new BPF map
to verify the test buffers can be found with the open coded dmabuf
iterator.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-6-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test creates a udmabuf, and a dmabuf from the system dmabuf heap,
and uses a BPF program that prints dmabuf metadata with the new
dmabuf_iter to verify they can be found.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250522230429.941193-5-tjmercier@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
-----BEGIN PGP SIGNATURE-----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=k6rK
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-svm-6.16' of https://github.com/kvm-x86/linux into HEAD
KVM SVM changes for 6.16:
- Wait for target vCPU to acknowledge KVM_REQ_UPDATE_PROTECTED_GUEST_STATE to
fix a race between AP destroy and VMRUN.
- Decrypt and dump the VMSA in dump_vmcb() if debugging enabled for the VM.
- Add support for ALLOWED_SEV_FEATURES.
- Add #VMGEXIT to the set of handlers special cased for CONFIG_RETPOLINE=y.
- Treat DEBUGCTL[5:2] as reserved to pave the way for virtualizing features
that utilize those bits.
- Don't account temporary allocations in sev_send_update_data().
- Add support for KVM_CAP_X86_BUS_LOCK_EXIT on SVM, via Bus Lock Threshold.
- Add support for SNP to the various SEV selftests.
- Add a selftest to verify fastops instructions via forced emulation.
- Add MGLRU support to the access tracking perf test.
-----BEGIN PGP SIGNATURE-----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=v9bp
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.16' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.16:
- Add support for SNP to the various SEV selftests.
- Add a selftest to verify fastops instructions via forced emulation.
- Add MGLRU support to the access tracking perf test.
There was an issue with SO_LINGER: instead of blocking until all queued
messages for the socket have been successfully sent (or the linger timeout
has been reached), close() would block until packets were handled by the
peer.
Add a test to alert on close() lingering when it should not.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-5-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Distill the virtio_vsock_sock::bytes_unsent checking loop (ioctl SIOCOUTQ)
and move it to utils. Tweak the comment.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250522-vsock-linger-v6-3-2ad00b0e447e@rbox.co
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current netlink API for WireGuard does not directly support removal
of allowed ips from a peer. A user can remove an allowed ip from a peer
in one of two ways:
1. By using the WGPEER_F_REPLACE_ALLOWEDIPS flag and providing a new
list of allowed ips which omits the allowed ip that is to be removed.
2. By reassigning an allowed ip to a "dummy" peer then removing that
peer with WGPEER_F_REMOVE_ME.
With the first approach, the driver completely rebuilds the allowed ip
list for a peer. If my current configuration is such that a peer has
allowed ips 192.168.0.2 and 192.168.0.3 and I want to remove 192.168.0.2
the actual transition looks like this.
[192.168.0.2, 192.168.0.3] <-- Initial state
[] <-- Step 1: Allowed ips removed for peer
[192.168.0.3] <-- Step 2: Allowed ips added back for peer
This is true even if the allowed ip list is small and the update does
not need to be batched into multiple WG_CMD_SET_DEVICE requests, as the
removal and subsequent addition of ips is non-atomic within a single
request. Consequently, wg_allowedips_lookup_dst and
wg_allowedips_lookup_src may return NULL while reconfiguring a peer even
for packets bound for ips a user did not intend to remove leading to
unintended interruptions in connectivity. This presents in userspace as
failed calls to sendto and sendmsg for UDP sockets. In my case, I ran
netperf while repeatedly reconfiguring the allowed ips for a peer with
wg.
/usr/local/bin/netperf -H 10.102.73.72 -l 10m -t UDP_STREAM -- -R 1 -m 1024
send_data: data send error: No route to host (errno 113)
netperf: send_omni: send_data failed: No route to host
While this may not be of particular concern for environments where peers
and allowed ips are mostly static, systems like Cilium manage peers and
allowed ips in a dynamic environment where peers (i.e. Kubernetes nodes)
and allowed ips (i.e. pods running on those nodes) can frequently
change making WGPEER_F_REPLACE_ALLOWEDIPS problematic.
The second approach avoids any possible connectivity interruptions
but is hacky and less direct, requiring the creation of a temporary
peer just to dispose of an allowed ip.
Introduce a new flag called WGALLOWEDIP_F_REMOVE_ME which in the same
way that WGPEER_F_REMOVE_ME allows a user to remove a single peer from
a WireGuard device's configuration allows a user to remove an ip from a
peer's set of allowed ips. This enables incremental updates to a
device's configuration without any connectivity blips or messy
workarounds.
A corresponding patch for wg extends the existing `wg set` interface to
leverage this feature.
$ wg set wg0 peer <PUBKEY> allowed-ips +192.168.88.0/24,-192.168.0.1/32
When '+' or '-' is prepended to any ip in the list, wg clears
WGPEER_F_REPLACE_ALLOWEDIPS and sets the WGALLOWEDIP_F_REMOVE_ME flag on
any ip prefixed with '-'.
Signed-off-by: Jordan Rife <jordan@jrife.io>
[Jason: minor style nits, fixes to selftest, bump of wireguard-tools version]
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://patch.msgid.link/20250521212707.1767879-5-Jason@zx2c4.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Boot code changes:
- A large series of changes to reorganize the x86 boot code into a better isolated
and easier to maintain base of PIC early startup code in arch/x86/boot/startup/,
by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86 boot code
reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S. Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish, Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix CONFIG_HARDENED_USERCOPY=y
(Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary (Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo Molnar)
- Make smp_text_poke_batch_process() subsume smp_text_poke_batch_finish()
(Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs (David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>
(Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy Shevchenko,
Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav Petkov, Chang S. Bae,
Chao Gao, Dan Williams, Dave Hansen, David Kaplan, David Woodhouse,
Eric Biggers, Ingo Molnar, Josh Poimboeuf, Juergen Gross, Malaya Kumar Rout,
Mario Limonciello, Nathan Chancellor, Oleg Nesterov, Pawan Gupta,
Peter Zijlstra, Shivank Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak,
Xin Li)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=JgQo
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"Boot code changes:
- A large series of changes to reorganize the x86 boot code into a
better isolated and easier to maintain base of PIC early startup
code in arch/x86/boot/startup/, by Ard Biesheuvel.
Motivation & background:
| Since commit
|
| c88d71508e ("x86/boot/64: Rewrite startup_64() in C")
|
| dated Jun 6 2017, we have been using C code on the boot path in a way
| that is not supported by the toolchain, i.e., to execute non-PIC C
| code from a mapping of memory that is different from the one provided
| to the linker. It should have been obvious at the time that this was a
| bad idea, given the need to sprinkle fixup_pointer() calls left and
| right to manipulate global variables (including non-pointer variables)
| without crashing.
|
| This C startup code has been expanding, and in particular, the SEV-SNP
| startup code has been expanding over the past couple of years, and
| grown many of these warts, where the C code needs to use special
| annotations or helpers to access global objects.
This tree includes the first phase of this work-in-progress x86
boot code reorganization.
Scalability enhancements and micro-optimizations:
- Improve code-patching scalability (Eric Dumazet)
- Remove MFENCEs for X86_BUG_CLFLUSH_MONITOR (Andrew Cooper)
CPU features enumeration updates:
- Thorough reorganization and cleanup of CPUID parsing APIs (Ahmed S.
Darwish)
- Fix, refactor and clean up the cacheinfo code (Ahmed S. Darwish,
Thomas Gleixner)
- Update CPUID bitfields to x86-cpuid-db v2.3 (Ahmed S. Darwish)
Memory management changes:
- Allow temporary MMs when IRQs are on (Andy Lutomirski)
- Opt-in to IRQs-off activate_mm() (Andy Lutomirski)
- Simplify choose_new_asid() and generate better code (Borislav
Petkov)
- Simplify 32-bit PAE page table handling (Dave Hansen)
- Always use dynamic memory layout (Kirill A. Shutemov)
- Make SPARSEMEM_VMEMMAP the only memory model (Kirill A. Shutemov)
- Make 5-level paging support unconditional (Kirill A. Shutemov)
- Stop prefetching current->mm->mmap_lock on page faults (Mateusz
Guzik)
- Predict valid_user_address() returning true (Mateusz Guzik)
- Consolidate initmem_init() (Mike Rapoport)
FPU support and vector computing:
- Enable Intel APX support (Chang S. Bae)
- Reorgnize and clean up the xstate code (Chang S. Bae)
- Make task_struct::thread constant size (Ingo Molnar)
- Restore fpu_thread_struct_whitelist() to fix
CONFIG_HARDENED_USERCOPY=y (Kees Cook)
- Simplify the switch_fpu_prepare() + switch_fpu_finish() logic (Oleg
Nesterov)
- Always preserve non-user xfeatures/flags in __state_perm (Sean
Christopherson)
Microcode loader changes:
- Help users notice when running old Intel microcode (Dave Hansen)
- AMD: Do not return error when microcode update is not necessary
(Annie Li)
- AMD: Clean the cache if update did not load microcode (Boris
Ostrovsky)
Code patching (alternatives) changes:
- Simplify, reorganize and clean up the x86 text-patching code (Ingo
Molnar)
- Make smp_text_poke_batch_process() subsume
smp_text_poke_batch_finish() (Nikolay Borisov)
- Refactor the {,un}use_temporary_mm() code (Peter Zijlstra)
Debugging support:
- Add early IDT and GDT loading to debug relocate_kernel() bugs
(David Woodhouse)
- Print the reason for the last reset on modern AMD CPUs (Yazen
Ghannam)
- Add AMD Zen debugging document (Mario Limonciello)
- Fix opcode map (!REX2) superscript tags (Masami Hiramatsu)
- Stop decoding i64 instructions in x86-64 mode at opcode (Masami
Hiramatsu)
CPU bugs and bug mitigations:
- Remove X86_BUG_MMIO_UNKNOWN (Borislav Petkov)
- Fix SRSO reporting on Zen1/2 with SMT disabled (Borislav Petkov)
- Restructure and harmonize the various CPU bug mitigation methods
(David Kaplan)
- Fix spectre_v2 mitigation default on Intel (Pawan Gupta)
MSR API:
- Large MSR code and API cleanup (Xin Li)
- In-kernel MSR API type cleanups and renames (Ingo Molnar)
PKEYS:
- Simplify PKRU update in signal frame (Chang S. Bae)
NMI handling code:
- Clean up, refactor and simplify the NMI handling code (Sohil Mehta)
- Improve NMI duration console printouts (Sohil Mehta)
Paravirt guests interface:
- Restrict PARAVIRT_XXL to 64-bit only (Kirill A. Shutemov)
SEV support:
- Share the sev_secrets_pa value again (Tom Lendacky)
x86 platform changes:
- Introduce the <asm/amd/> header namespace (Ingo Molnar)
- i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to
<asm/amd/fch.h> (Mario Limonciello)
Fixes and cleanups:
- x86 assembly code cleanups and fixes (Uros Bizjak)
- Misc fixes and cleanups (Andi Kleen, Andy Lutomirski, Andy
Shevchenko, Ard Biesheuvel, Bagas Sanjaya, Baoquan He, Borislav
Petkov, Chang S. Bae, Chao Gao, Dan Williams, Dave Hansen, David
Kaplan, David Woodhouse, Eric Biggers, Ingo Molnar, Josh Poimboeuf,
Juergen Gross, Malaya Kumar Rout, Mario Limonciello, Nathan
Chancellor, Oleg Nesterov, Pawan Gupta, Peter Zijlstra, Shivank
Garg, Sohil Mehta, Thomas Gleixner, Uros Bizjak, Xin Li)"
* tag 'x86-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (331 commits)
x86/bugs: Fix spectre_v2 mitigation default on Intel
x86/bugs: Restructure ITS mitigation
x86/xen/msr: Fix uninitialized variable 'err'
x86/msr: Remove a superfluous inclusion of <asm/asm.h>
x86/paravirt: Restrict PARAVIRT_XXL to 64-bit only
x86/mm/64: Make 5-level paging support unconditional
x86/mm/64: Make SPARSEMEM_VMEMMAP the only memory model
x86/mm/64: Always use dynamic memory layout
x86/bugs: Fix indentation due to ITS merge
x86/cpuid: Rename hypervisor_cpuid_base()/for_each_possible_hypervisor_cpuid_base() to cpuid_base_hypervisor()/for_each_possible_cpuid_base_hypervisor()
x86/cpu/intel: Rename CPUID(0x2) descriptors iterator parameter
x86/cacheinfo: Rename CPUID(0x2) descriptors iterator parameter
x86/cpuid: Rename cpuid_get_leaf_0x2_regs() to cpuid_leaf_0x2()
x86/cpuid: Rename have_cpuid_p() to cpuid_feature()
x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header
x86/cpuid: Move CPUID(0x2) APIs into <cpuid/api.h>
x86/msr: Add rdmsrl_on_cpu() compatibility wrapper
x86/mm: Fix kernel-doc descriptions of various pgtable methods
x86/asm-offsets: Export certain 'struct cpuinfo_x86' fields for 64-bit asm use too
x86/boot: Defer initialization of VM space related global variables
...
Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to
the Intel driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the
x86 and PowerPC platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker,
Ian Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang,
Sandipan Das, Thorsten Blum)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=tPRs
-----END PGP SIGNATURE-----
Merge tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events updates from Ingo Molnar:
"Core & generic-arch updates:
- Add support for dynamic constraints and propagate it to the Intel
driver (Kan Liang)
- Fix & enhance driver-specific throttling support (Kan Liang)
- Record sample last_period before updating on the x86 and PowerPC
platforms (Mark Barnett)
- Make perf_pmu_unregister() usable (Peter Zijlstra)
- Unify perf_event_free_task() / perf_event_exit_task_context()
(Peter Zijlstra)
- Simplify perf_event_release_kernel() and perf_event_free_task()
(Peter Zijlstra)
- Allocate non-contiguous AUX pages by default (Yabin Cui)
Uprobes updates:
- Add support to emulate NOP instructions (Jiri Olsa)
- selftests/bpf: Add 5-byte NOP uprobe trigger benchmark (Jiri Olsa)
x86 Intel PMU enhancements:
- Support Intel Auto Counter Reload [ACR] (Kan Liang)
- Add PMU support for Clearwater Forest (Dapeng Mi)
- Arch-PEBS preparatory changes: (Dapeng Mi)
- Parse CPUID archPerfmonExt leaves for non-hybrid CPUs
- Decouple BTS initialization from PEBS initialization
- Introduce pairs of PEBS static calls
x86 AMD PMU enhancements:
- Use hrtimer for handling overflows in the AMD uncore driver
(Sandipan Das)
- Prevent UMC counters from saturating (Sandipan Das)
Fixes and cleanups:
- Fix put_ctx() ordering (Frederic Weisbecker)
- Fix irq work dereferencing garbage (Frederic Weisbecker)
- Misc fixes and cleanups (Changbin Du, Frederic Weisbecker, Ian
Rogers, Ingo Molnar, Kan Liang, Peter Zijlstra, Qing Wang, Sandipan
Das, Thorsten Blum)"
* tag 'perf-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
perf/headers: Clean up <linux/perf_event.h> a bit
perf/uapi: Clean up <uapi/linux/perf_event.h> a bit
perf/uapi: Fix PERF_RECORD_SAMPLE comments in <uapi/linux/perf_event.h>
mips/perf: Remove driver-specific throttle support
xtensa/perf: Remove driver-specific throttle support
sparc/perf: Remove driver-specific throttle support
loongarch/perf: Remove driver-specific throttle support
csky/perf: Remove driver-specific throttle support
arc/perf: Remove driver-specific throttle support
alpha/perf: Remove driver-specific throttle support
perf/apple_m1: Remove driver-specific throttle support
perf/arm: Remove driver-specific throttle support
s390/perf: Remove driver-specific throttle support
powerpc/perf: Remove driver-specific throttle support
perf/x86/zhaoxin: Remove driver-specific throttle support
perf/x86/amd: Remove driver-specific throttle support
perf/x86/intel: Remove driver-specific throttle support
perf: Only dump the throttle log for the leader
perf: Fix the throttle logic for a group
perf/core: Add the is_event_in_freq_mode() helper to simplify the code
...
Futexes:
- Add support for task local hash maps (Sebastian Andrzej Siewior,
Peter Zijlstra)
- Implement the FUTEX2_NUMA ABI, which feature extends the futex
interface to be NUMA-aware. On NUMA-aware futexes a second u32
word containing the NUMA node is added to after the u32 futex value
word. (Peter Zijlstra)
- Implement the FUTEX2_MPOL ABI, which feature extends the futex
interface to be mempolicy-aware as well, to further refine futex
node mappings and lookups. (Peter Zijlstra)
Locking primitives:
- Misc cleanups (Andy Shevchenko, Borislav Petkov, Colin Ian King,
Ingo Molnar, Nam Cao, Peter Zijlstra)
Lockdep:
- Prevent abuse of lockdep subclasses (Waiman Long)
- Add number of dynamic keys to /proc/lockdep_stats (Waiman Long)
Plus misc cleanups and fixes.
Note that the tree includes the following dependent out-of-subsystem
changes as well:
- rcuref: Provide rcuref_is_dead()
- mm: Add vmalloc_huge_node()
- mm: Add the mmap_read_lock guard to <linux/mmap_lock.h>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=La/x
-----END PGP SIGNATURE-----
Merge tag 'locking-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"Futexes:
- Add support for task local hash maps (Sebastian Andrzej Siewior,
Peter Zijlstra)
- Implement the FUTEX2_NUMA ABI, which feature extends the futex
interface to be NUMA-aware. On NUMA-aware futexes a second u32 word
containing the NUMA node is added to after the u32 futex value word
(Peter Zijlstra)
- Implement the FUTEX2_MPOL ABI, which feature extends the futex
interface to be mempolicy-aware as well, to further refine futex
node mappings and lookups (Peter Zijlstra)
Locking primitives:
- Misc cleanups (Andy Shevchenko, Borislav Petkov, Colin Ian King,
Ingo Molnar, Nam Cao, Peter Zijlstra)
Lockdep:
- Prevent abuse of lockdep subclasses (Waiman Long)
- Add number of dynamic keys to /proc/lockdep_stats (Waiman Long)
Plus misc cleanups and fixes"
* tag 'locking-core-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (35 commits)
selftests/futex: Fix spelling mistake "unitiliazed" -> "uninitialized"
futex: Correct the kernedoc return value for futex_wait_setup().
tools headers: Synchronize prctl.h ABI header
futex: Use RCU_INIT_POINTER() in futex_mm_init().
selftests/futex: Use TAP output in futex_numa_mpol
selftests/futex: Use TAP output in futex_priv_hash
futex: Fix kernel-doc comments
futex: Relax the rcu_assign_pointer() assignment of mm->futex_phash in futex_mm_init()
futex: Fix outdated comment in struct restart_block
locking/lockdep: Add number of dynamic keys to /proc/lockdep_stats
locking/lockdep: Prevent abuse of lockdep subclass
locking/lockdep: Move hlock_equal() to the respective #ifdeffery
futex,selftests: Add another FUTEX2_NUMA selftest
selftests/futex: Add futex_numa_mpol
selftests/futex: Add futex_priv_hash
selftests/futex: Build without headers nonsense
tools/perf: Allow to select the number of hash buckets
tools headers: Synchronize prctl.h ABI header
futex: Implement FUTEX2_MPOL
futex: Implement FUTEX2_NUMA
...
- Enables qemu_config for riscv32, sparc 64-bit, PowerPC 32-bit BE and
64-bit LE.
- Enables CONFIG_SPARC32 to clearly differentiate between sparc 32-bit
and 64-bit configurations.
- Enables CONFIG_CPU_BIG_ENDIAN to clearly differentiate between powerpc
LE and BE configurations.
- Add feature to list available architectures to kunit tool.
- Fixes to bugs and changes to documentation.
-----BEGIN PGP SIGNATURE-----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=32OH
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- Enable qemu_config for riscv32, sparc 64-bit, PowerPC 32-bit BE and
64-bit LE
- Enable CONFIG_SPARC32 to clearly differentiate between sparc 32-bit
and 64-bit configurations
- Enable CONFIG_CPU_BIG_ENDIAN to clearly differentiate between powerpc
LE and BE configurations
- Add feature to list available architectures to kunit tool
- Fixes to bugs and changes to documentation
* tag 'linux_kselftest-kunit-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Fix wrong parameter to kunit_deactivate_static_stub()
kunit: tool: add test counts to JSON output
Documentation: kunit: improve example on testing static functions
kunit: executor: Remove const from kunit_filter_suites() allocation type
kunit: qemu_configs: Disable faulting tests on 32-bit SPARC
kunit: qemu_configs: Add 64-bit SPARC configuration
kunit: qemu_configs: sparc: Explicitly enable CONFIG_SPARC32=y
kunit: qemu_configs: Add PowerPC 32-bit BE and 64-bit LE
kunit: qemu_configs: powerpc: Explicitly enable CONFIG_CPU_BIG_ENDIAN=y
kunit: tool: Implement listing of available architectures
kunit: qemu_configs: Add riscv32 config
kunit: configs: Enable CONFIG_INIT_STACK_ALL_PATTERN in all_tests
-- Fixes
- cpufreq test to not double suspend in rtcwake case.
- compile error in pid_namespace test.
- run_kselftest.sh to use readlink if realpath is not available.
- cpufreq basic read and update testcases.
- ftrace to add poll to a gen_file so test can find it at run-time.
- spelling errors in perf_events test.
-----BEGIN PGP SIGNATURE-----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=9kTs
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
"Fixes:
- cpufreq test to not double suspend in rtcwake case
- compile error in pid_namespace test
- run_kselftest.sh to use readlink if realpath is not available
- cpufreq basic read and update testcases
- ftrace to add poll to a gen_file so test can find it at run-time
- spelling errors in perf_events test"
* tag 'linux_kselftest-next-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/run_kselftest.sh: Use readlink if realpath is not available
selftests/timens: timerfd: Use correct clockid type in tclock_gettime()
selftests/timens: Make run_tests() functions static
selftests/timens: Print TAP headers
selftests: pid_namespace: add missing sys/mount.h include in pid_max.c
kselftest: cpufreq: Get rid of double suspend in rtcwake case
selftests/cpufreq: Fix cpufreq basic read and update testcases
selftests/ftrace: Convert poll to a gen_file
selftests/perf_events: Fix spelling mistake "sycnhronize" -> "synchronize"
Summary of changes:
- Removed swake_up_one_online() workaround
- Reverted an incorrect rcuog wake-up fix from offline softirq
- Rust RCU Guard methods marked as inline
- Updated MAINTAINERS with Joel’s and Zqiang's new email address
- Replaced magic constant in rcu_seq_done_exact() with named constant
- Added warning mechanism to validate rcu_seq_done_exact()
- Switched SRCU polling API to use rcu_seq_done_exact()
- Commented on redundant delta check in rcu_seq_done_exact()
- Made ->gpwrap tests in rcutorture more frequent
- Fixed reuse of ARM64 images in rcutorture
- rcutorture improved to check Kconfig and reader conflict handling
- Extracted logic from rcu_torture_one_read() for clarity
- Updated LWN RCU API documentation links
- Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
- Added tests for SRCU up/down reader primitives
- Added comments and delays checks in rcutorture
- Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
- Added --do-normal and --do-no-normal to torture.sh
- Added RCU Rust binding tests to torture.sh
- Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
- Replaced kmalloc() with kcalloc() in rcuscale
- Refined listRCU example code for stale data elimination
- Fixed hardirq count bug for x86 in cpu_stall_cputime
- Added safety checks in rcu/nocb for offloaded rdp access
- Other miscellaneous changes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEcoCIrlGe4gjE06JJqA4nf2o45hAFAmgoF5oACgkQqA4nf2o4
5hDvVw//TNsJ/g0HTMu02uXMmtFIrgvpTnH7OEGJ+2p/KErrmWYsBJQw41ueLAQL
Drtq3q9888UFF5LLA43HC88DFmT9uV8V8TmmURH+pZWdmJY1Ekn8UBSBhDPGGpC5
sGIO2jJKjHN8G7fyJKoPtL9jxKSulHF/XQTIL2pP23jopAIwosoCHVAwGvnGVvBC
smXfMSu+bd3IifNFroodsqjVXgnNQwWUNboOkz0KfkiiosgZsWWW8DaM3NGjdp+C
tUHLs1zfC6sgJUjdpokTE3TcNudlMgVlB2Quj5jhh1YvsvedgIJXl4wpR6JVutyN
F9awKt1AZkyZ+cTp+JpohaWaN9aKfNNG7jZ+rxQ0VcuRh35wmBJtiWNjEtJ38R82
kTC1RI7MEus+6OZRt92jv5TNSa9t3wHbi5fBjNRiQ8PYq5cibZy7Lyrj2JOK7Zqs
pgmdUnhQH2Uhf52b+clG5hWO55gEtACY8pin6kNewClcRtz04Jew7gkiYDGka4F4
EXbuDHSWi25eSb3FzT2BqR72OZcJ0kv747OTp+2yTv2TaBA5p+OD8hvL/WbWC2Ok
DK1YQ4RgEerTSZ4PbgPtWkNnlf6xjdWBaYNwmo+G/DgfjPoTOy1Jp73Z4b1AqSB5
IPEQy1d/799QgGTYkbrvRtvWHg8yfOMz3ByZoHg31rafr0AsrXM=
=6mun
-----END PGP SIGNATURE-----
Merge tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Joel Fernandes:
- Removed swake_up_one_online() workaround
- Reverted an incorrect rcuog wake-up fix from offline softirq
- Rust RCU Guard methods marked as inline
- Updated MAINTAINERS with Joel’s and Zqiang's new email address
- Replaced magic constant in rcu_seq_done_exact() with named constant
- Added warning mechanism to validate rcu_seq_done_exact()
- Switched SRCU polling API to use rcu_seq_done_exact()
- Commented on redundant delta check in rcu_seq_done_exact()
- Made ->gpwrap tests in rcutorture more frequent
- Fixed reuse of ARM64 images in rcutorture
- rcutorture improved to check Kconfig and reader conflict handling
- Extracted logic from rcu_torture_one_read() for clarity
- Updated LWN RCU API documentation links
- Enabled --do-rt in torture.sh for CONFIG_PREEMPT_RT
- Added tests for SRCU up/down reader primitives
- Added comments and delays checks in rcutorture
- Deprecated srcu_read_lock_lite() and srcu_read_unlock_lite() via checkpatch
- Added --do-normal and --do-no-normal to torture.sh
- Added RCU Rust binding tests to torture.sh
- Reduced CPU overcommit and removed MAXSMP/CPUMASK_OFFSTACK in TREE01
- Replaced kmalloc() with kcalloc() in rcuscale
- Refined listRCU example code for stale data elimination
- Fixed hardirq count bug for x86 in cpu_stall_cputime
- Added safety checks in rcu/nocb for offloaded rdp access
- Other miscellaneous changes
* tag 'next.2025.05.17a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (27 commits)
rcutorture: Fix issue with re-using old images on ARM64
rcutorture: Remove MAXSMP and CPUMASK_OFFSTACK from TREE01
rcutorture: Reduce TREE01 CPU overcommit
torture: Check for "Call trace:" as well as "Call Trace:"
rcutorture: Perform more frequent testing of ->gpwrap
torture: Add testing of RCU's Rust bindings to torture.sh
torture: Add --do-{,no-}normal to torture.sh
checkpatch: Deprecate srcu_read_lock_lite() and srcu_read_unlock_lite()
rcutorture: Comment invocations of tick_dep_set_task()
rcu/nocb: Add Safe checks for access offloaded rdp
rcuscale: using kcalloc() to relpace kmalloc()
doc/RCU/listRCU: refine example code for eliminating stale data
doc: Update LWN RCU API links in whatisRCU.rst
Revert "rcu/nocb: Fix rcuog wake-up from offline softirq"
rust: sync: rcu: Mark Guard methods as inline
rcu/cpu_stall_cputime: fix the hardirq count for x86 architecture
rcu: Remove swake_up_one_online() bandaid
MAINTAINERS: Update Zqiang's email address
rcutorture: Make torture.sh --do-rt use CONFIG_PREEMPT_RT
srcu: Use rcu_seq_done_exact() for polling API
...
API:
- Fix memcpy_sglist to handle partially overlapping SG lists.
- Use memcpy_sglist to replace null skcipher.
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK.
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS.
- Hide CRYPTO_MANAGER.
- Add delayed freeing of driver crypto_alg structures.
Compression:
- Allocate large buffers on first use instead of initialisation in scomp.
- Drop destination linearisation buffer in scomp.
- Move scomp stream allocation into acomp.
- Add acomp scatter-gather walker.
- Remove request chaining.
- Add optional async request allocation.
Hashing:
- Remove request chaining.
- Add optional async request allocation.
- Move partial block handling into API.
- Add ahash support to hmac.
- Fix shash documentation to disallow usage in hard IRQs.
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64.
- Drop avx10_256 xts(aes)/ctr(aes) on x86.
- Improve avx-512 optimisations for xts(aes).
- Move chacha arch implementations into lib/crypto.
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm.
- Disable powerpc/poly1305 as it has no SIMD fallback.
- Move sha256 arch implementations into lib/crypto.
- Convert deflate to acomp.
- Set block size correctly in cbcmac.
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss.
- Fix warm-reboot failure by making shutdown do more work in qat.
- Add locking in zynqmp-sha.
- Remove cavium/zip.
- Add support for PCI device 0x17D8 to ccp.
- Add qat_6xxx support in qat.
- Add support for RK3576 in rockchip-rng.
- Add support for i.MX8QM in caam.
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up.
- Add new SEV/SNP platform shutdown API in ccp.
-----BEGIN PGP SIGNATURE-----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=O8L5
-----END PGP SIGNATURE-----
Merge tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
-----BEGIN PGP SIGNATURE-----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=Jju3
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.16
* New features:
- Add large stage-2 mapping support for non-protected pKVM guests,
clawing back some performance.
- Add UBSAN support to the standalone EL2 object used in nVHE/hVHE and
protected modes.
- Enable nested virtualisation support on systems that support it
(yes, it has been a long time coming), though it is disabled by
default.
* Improvements, fixes and cleanups:
- Large rework of the way KVM tracks architecture features and links
them with the effects of control bits. This ensures correctness of
emulation (the data is automatically extracted from the published
JSON files), and helps dealing with the evolution of the
architecture.
- Significant changes to the way pKVM tracks ownership of pages,
avoiding page table walks by storing the state in the hypervisor's
vmemmap. This in turn enables the THP support described above.
- New selftest checking the pKVM ownership transition rules
- Fixes for FEAT_MTE_ASYNC being accidentally advertised to guests
even if the host didn't have it.
- Fixes for the address translation emulation, which happened to be
rather buggy in some specific contexts.
- Fixes for the PMU emulation in NV contexts, decoupling PMCR_EL0.N
from the number of counters exposed to a guest and addressing a
number of issues in the process.
- Add a new selftest for the SVE host state being corrupted by a
guest.
- Keep HCR_EL2.xMO set at all times for systems running with the
kernel at EL2, ensuring that the window for interrupts is slightly
bigger, and avoiding a pretty bad erratum on the AmpereOne HW.
- Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers
from a pretty bad case of TLB corruption unless accesses to HCR_EL2
are heavily synchronised.
- Add a per-VM, per-ITS debugfs entry to dump the state of the ITS
tables in a human-friendly fashion.
- and the usual random cleanups.
-----BEGIN PGP SIGNATURE-----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=1PNK
-----END PGP SIGNATURE-----
Merge tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPUAAKCRCRxhvAZXjc
ooziAP9vZifOayDPF/do8fG8BQZ3RpOmAeNqkLdGliX6kMOEIAEApfa00Y+EVeaJ
gyUY+Ui7k5xb5pzlDbHwrZxX4Q6wEwY=
=MUXL
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.selftests' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs selftests updates from Christian Brauner:
"This contains various cleanups, fixes, and extensions for out
filesystem selftests"
* tag 'vfs-6.16-rc1.selftests' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/fs/mount-notify: add a test variant running inside userns
selftests/filesystems: create setup_userns() helper
selftests/filesystems: create get_unique_mnt_id() helper
selftests/fs/mount-notify: build with tools include dir
selftests/mount_settattr: remove duplicate syscall definitions
selftests/pidfd: move syscall definitions into wrappers.h
selftests/fs/statmount: build with tools include dir
selftests/filesystems: move wrapper.h out of overlayfs subdir
selftests/mount_settattr: ensure that ext4 filesystem can be created
selftests/mount_settattr: add missing STATX_MNT_ID_UNIQUE define
selftests/mount_settattr: don't define sys_open_tree() twice
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTwAKCRCRxhvAZXjc
oliqAQCVdrBn7D2+dB04hjefFq6W6LhyLGrtCCliflicN5SyxAD+PHHiB9nFKe6J
xQkaNArCJjPd2QEx73aGjHzi3UQq6Qs=
=Pk9c
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull coredump updates from Christian Brauner:
"This adds support for sending coredumps over an AF_UNIX socket. It
also makes (implicit) use of the new SO_PEERPIDFD ability to hand out
pidfds for reaped peer tasks
The new coredump socket will allow userspace to not have to rely on
usermode helpers for processing coredumps and provides a saf way to
handle them instead of relying on super privileged coredumping helpers
This will also be significantly more lightweight since the kernel
doens't have to do a fork()+exec() for each crashing process to spawn
a usermodehelper. Instead the kernel just connects to the AF_UNIX
socket and userspace can process it concurrently however it sees fit.
Support for userspace is incoming starting with systemd-coredump
There's more work coming in that direction next cycle. The rest below
goes into some details and background
Coredumping currently supports two modes:
(1) Dumping directly into a file somewhere on the filesystem.
(2) Dumping into a pipe connected to a usermode helper process
spawned as a child of the system_unbound_wq or kthreadd
For simplicity I'm mostly ignoring (1). There's probably still some
users of (1) out there but processing coredumps in this way can be
considered adventurous especially in the face of set*id binaries
The most common option should be (2) by now. It works by allowing
userspace to put a string into /proc/sys/kernel/core_pattern like:
|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h
The "|" at the beginning indicates to the kernel that a pipe must be
used. The path following the pipe indicator is a path to a binary that
will be spawned as a usermode helper process. Any additional
parameters pass information about the task that is generating the
coredump to the binary that processes the coredump
In the example the core_pattern shown causes the kernel to spawn
systemd-coredump as a usermode helper. There's various conceptual
consequences of this (non-exhaustive list):
- systemd-coredump is spawned with file descriptor number 0 (stdin)
connected to the read-end of the pipe. All other file descriptors
are closed. That specifically includes 1 (stdout) and 2 (stderr).
This has already caused bugs because userspace assumed that this
cannot happen (Whether or not this is a sane assumption is
irrelevant)
- systemd-coredump will be spawned as a child of system_unbound_wq.
So it is not a child of any userspace process and specifically not
a child of PID 1. It cannot be waited upon and is in a weird hybrid
upcall which are difficult for userspace to control correctly
- systemd-coredump is spawned with full kernel privileges. This
necessitates all kinds of weird privilege dropping excercises in
userspace to make this safe
- A new usermode helper has to be spawned for each crashing process
This adds a new mode:
(3) Dumping into an AF_UNIX socket
Userspace can set /proc/sys/kernel/core_pattern to:
@/path/to/coredump.socket
The "@" at the beginning indicates to the kernel that an AF_UNIX
coredump socket will be used to process coredumps
The coredump socket must be located in the initial mount namespace.
When a task coredumps it opens a client socket in the initial network
namespace and connects to the coredump socket:
- The coredump server uses SO_PEERPIDFD to get a stable handle on the
connected crashing task. The retrieved pidfd will provide a stable
reference even if the crashing task gets SIGKILLed while generating
the coredump. That is a huge attack vector right now
- By setting core_pipe_limit non-zero userspace can guarantee that
the crashing task cannot be reaped behind it's back and thus
process all necessary information in /proc/<pid>. The SO_PEERPIDFD
can be used to detect whether /proc/<pid> still refers to the same
process
The core_pipe_limit isn't used to rate-limit connections to the
socket. This can simply be done via AF_UNIX socket directly
- The pidfd for the crashing task will contain information how the
task coredumps. The PIDFD_GET_INFO ioctl gained a new flag
PIDFD_INFO_COREDUMP which can be used to retreive the coredump
information
If the coredump gets a new coredump client connection the kernel
guarantees that PIDFD_INFO_COREDUMP information is available.
Currently the following information is provided in the new
@coredump_mask extension to struct pidfd_info:
* PIDFD_COREDUMPED is raised if the task did actually coredump
* PIDFD_COREDUMP_SKIP is raised if the task skipped coredumping
(e.g., undumpable)
* PIDFD_COREDUMP_USER is raised if this is a regular coredump and
doesn't need special care by the coredump server
* PIDFD_COREDUMP_ROOT is raised if the generated coredump should
be treated as sensitive and the coredump server should restrict
access to the generated coredump to sufficiently privileged
users"
* tag 'vfs-6.16-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
mips, net: ensure that SOCK_COREDUMP is defined
selftests/coredump: add tests for AF_UNIX coredumps
selftests/pidfd: add PIDFD_INFO_COREDUMP infrastructure
coredump: validate socket name as it is written
coredump: show supported coredump modes
pidfs, coredump: add PIDFD_INFO_COREDUMP
coredump: add coredump socket
coredump: reflow dump helpers a little
coredump: massage do_coredump()
coredump: massage format_corename()
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTwAKCRCRxhvAZXjc
ov4zAP4yfqKBAz6eMt9CzDgHCdVQJ9Nuur1EiRdot3maPzHTcQEA2hVkJrvVo1Y/
jCVAf7gmGX1Uu6nCUF6Vjy35g8i20gA=
=nzYS
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pidfs updates from Christian Brauner:
"Features:
- Allow handing out pidfds for reaped tasks for AF_UNIX SO_PEERPIDFD
socket option
SO_PEERPIDFD is a socket option that allows to retrieve a pidfd for
the process that called connect() or listen(). This is heavily used
to safely authenticate clients in userspace avoiding security bugs
due to pid recycling races (dbus, polkit, systemd, etc.)
SO_PEERPIDFD currently doesn't support handing out pidfds if the
sk->sk_peer_pid thread-group leader has already been reaped. In
this case it currently returns EINVAL. Userspace still wants to get
a pidfd for a reaped process to have a stable handle it can pass
on. This is especially useful now that it is possible to retrieve
exit information through a pidfd via the PIDFD_GET_INFO ioctl()'s
PIDFD_INFO_EXIT flag
Another summary has been provided by David Rheinsberg:
> A pidfd can outlive the task it refers to, and thus user-space
> must already be prepared that the task underlying a pidfd is
> gone at the time they get their hands on the pidfd. For
> instance, resolving the pidfd to a PID via the fdinfo must be
> prepared to read `-1`.
>
> Despite user-space knowing that a pidfd might be stale, several
> kernel APIs currently add another layer that checks for this. In
> particular, SO_PEERPIDFD returns `EINVAL` if the peer-task was
> already reaped, but returns a stale pidfd if the task is reaped
> immediately after the respective alive-check.
>
> This has the unfortunate effect that user-space now has two ways
> to check for the exact same scenario: A syscall might return
> EINVAL/ESRCH/... *or* the pidfd might be stale, even though
> there is no particular reason to distinguish both cases. This
> also propagates through user-space APIs, which pass on pidfds.
> They must be prepared to pass on `-1` *or* the pidfd, because
> there is no guaranteed way to get a stale pidfd from the kernel.
>
> Userspace must already deal with a pidfd referring to a reaped
> task as the task may exit and get reaped at any time will there
> are still many pidfds referring to it
In order to allow handing out reaped pidfd SO_PEERPIDFD needs to
ensure that PIDFD_INFO_EXIT information is available whenever a
pidfd for a reaped task is created by PIDFD_INFO_EXIT. The uapi
promises that reaped pidfds are only handed out if it is guaranteed
that the caller sees the exit information:
TEST_F(pidfd_info, success_reaped)
{
struct pidfd_info info = {
.mask = PIDFD_INFO_CGROUPID | PIDFD_INFO_EXIT,
};
/*
* Process has already been reaped and PIDFD_INFO_EXIT been set.
* Verify that we can retrieve the exit status of the process.
*/
ASSERT_EQ(ioctl(self->child_pidfd4, PIDFD_GET_INFO, &info), 0);
ASSERT_FALSE(!!(info.mask & PIDFD_INFO_CREDS));
ASSERT_TRUE(!!(info.mask & PIDFD_INFO_EXIT));
ASSERT_TRUE(WIFEXITED(info.exit_code));
ASSERT_EQ(WEXITSTATUS(info.exit_code), 0);
}
To hand out pidfds for reaped processes we thus allocate a pidfs
entry for the relevant sk->sk_peer_pid at the time the
sk->sk_peer_pid is stashed and drop it when the socket is
destroyed. This guarantees that exit information will always be
recorded for the sk->sk_peer_pid task and we can hand out pidfds
for reaped processes
- Hand a pidfd to the coredump usermode helper process
Give userspace a way to instruct the kernel to install a pidfd for
the crashing process into the process started as a usermode helper.
There's still tricky race-windows that cannot be easily or
sometimes not closed at all by userspace. There's various ways like
looking at the start time of a process to make sure that the
usermode helper process is started after the crashing process but
it's all very very brittle and fraught with peril
The crashed-but-not-reaped process can be killed by userspace
before coredump processing programs like systemd-coredump have had
time to manually open a PIDFD from the PID the kernel provides
them, which means they can be tricked into reading from an
arbitrary process, and they run with full privileges as they are
usermode helper processes
Even if that specific race-window wouldn't exist it's still the
safest and cleanest way to let the kernel provide the pidfd
directly instead of requiring userspace to do it manually. In
parallel with this commit we already have systemd adding support
for this in [1]
When the usermode helper process is forked we install a pidfd file
descriptor three into the usermode helper's file descriptor table
so it's available to the exec'd program
Since usermode helpers are either children of the system_unbound_wq
workqueue or kthreadd we know that the file descriptor table is
empty and can thus always use three as the file descriptor number
Note, that we'll install a pidfd for the thread-group leader even
if a subthread is calling do_coredump(). We know that task linkage
hasn't been removed yet and even if this @current isn't the actual
thread-group leader we know that the thread-group leader cannot be
reaped until
@current has exited
- Allow telling when a task has not been found from finding the wrong
task when creating a pidfd
We currently report EINVAL whenever a struct pid has no tasked
attached anymore thereby conflating two concepts:
(1) The task has already been reaped
(2) The caller requested a pidfd for a thread-group leader but the
pid actually references a struct pid that isn't used as a
thread-group leader
This is causing issues for non-threaded workloads as in where they
expect ESRCH to be reported, not EINVAL
So allow userspace to reliably distinguish between (1) and (2)
- Make it possible to detect when a pidfs entry would outlive the
struct pid it pinned
- Add a range of new selftests
Cleanups:
- Remove unneeded NULL check from pidfd_prepare() for passed struct
pid
- Avoid pointless reference count bump during release_task()
Fixes:
- Various fixes to the pidfd and coredump selftests
- Fix error handling for replace_fd() when spawning coredump usermode
helper"
* tag 'vfs-6.16-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
pidfs: detect refcount bugs
coredump: hand a pidfd to the usermode coredump helper
coredump: fix error handling for replace_fd()
pidfs: move O_RDWR into pidfs_alloc_file()
selftests: coredump: Raise timeout to 2 minutes
selftests: coredump: Fix test failure for slow machines
selftests: coredump: Properly initialize pointer
net, pidfs: enable handing out pidfds for reaped sk->sk_peer_pid
pidfs: get rid of __pidfd_prepare()
net, pidfs: prepare for handing out pidfds for reaped sk->sk_peer_pid
pidfs: register pid in pidfs
net, pidfd: report EINVAL for ESRCH
release_task: kill the no longer needed get/put_pid(thread_pid)
pidfs: ensure consistent ENOENT/ESRCH reporting
exit: move wake_up_all() pidfd waiters into __unhash_process()
selftest/pidfd: add test for thread-group leader pidfd open for thread
pidfd: improve uapi when task isn't found
pidfd: remove unneeded NULL check from pidfd_prepare()
selftests/pidfd: adapt to recent changes
-----BEGIN PGP SIGNATURE-----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=fBhd
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next,
specifically 26 patches: 5 patches adding/updating selftests,
4 fixes, 3 PREEMPT_RT fixes, and 14 patches to enhance nf_tables):
1) Improve selftest coverage for pipapo 4 bit group format, from
Florian Westphal.
2) Fix incorrect dependencies when compiling a kernel without
legacy ip{6}tables support, also from Florian.
3) Two patches to fix nft_fib vrf issues, including selftest updates
to improve coverage, also from Florian Westphal.
4) Fix incorrect nesting in nft_tunnel's GENEVE support, from
Fernando F. Mancera.
5) Three patches to fix PREEMPT_RT issues with nf_dup infrastructure
and nft_inner to match in inner headers, from Sebastian Andrzej Siewior.
6) Integrate conntrack information into nft trace infrastructure,
from Florian Westphal.
7) A series of 13 patches to allow to specify wildcard netdevice in
netdev basechain and flowtables, eg.
table netdev filter {
chain ingress {
type filter hook ingress devices = { eth0, eth1, vlan* } priority 0; policy accept;
}
}
This also allows for runtime hook registration on NETDEV_{UN}REGISTER
event, from Phil Sutter.
netfilter pull request 25-05-23
* tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: (26 commits)
selftests: netfilter: Torture nftables netdev hooks
netfilter: nf_tables: Add notifications for hook changes
netfilter: nf_tables: Support wildcard netdev hook specs
netfilter: nf_tables: Sort labels in nft_netdev_hook_alloc()
netfilter: nf_tables: Handle NETDEV_CHANGENAME events
netfilter: nf_tables: Wrap netdev notifiers
netfilter: nf_tables: Respect NETDEV_REGISTER events
netfilter: nf_tables: Prepare for handling NETDEV_REGISTER events
netfilter: nf_tables: Have a list of nf_hook_ops in nft_hook
netfilter: nf_tables: Pass nf_hook_ops to nft_unregister_flowtable_hook()
netfilter: nf_tables: Introduce nft_register_flowtable_ops()
netfilter: nf_tables: Introduce nft_hook_find_ops{,_rcu}()
netfilter: nf_tables: Introduce functions freeing nft_hook objects
netfilter: nf_tables: add packets conntrack state to debug trace info
netfilter: conntrack: make nf_conntrack_id callable without a module dependency
netfilter: nf_dup_netdev: Move the recursion counter struct netdev_xmit
netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx
netfilter: nf_dup{4, 6}: Move duplication check to task_struct
netfilter: nft_tunnel: fix geneve_opt dump
selftests: netfilter: nft_fib.sh: add type and oif tests with and without VRFs
...
====================
Link: https://patch.msgid.link/20250523132712.458507-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmgu4Z8THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnBV7B/9i36vJXJuRMvLhP6vQNeEtixa5YkWe
AZ/ALtAlYVzQXIKYJs7st+bxzQLmN7BfvcGdtXmtgIsNttNL1Kl1asvKFuRN3hqp
CNjH83vqmoJMbKjcnPmxi/t3IfprfTU99g34gz5ayJN15rYptQAZRIFoX63Di6jC
XvJbhM2ztJqHA5o5kMseCJ8kRq+RCAunI5Z1hltaAUWmypdc1RPWAJQed4x1ssSM
8ctyWGy32ctyIoZ+B8tXzE3FoTay5UditN0lfdOe9pE+j6ZeYZRKdquKh4gLvK9c
mFjxQm/TqbWWIWuts30iy2dp2PgNEyFrcJUZWu8/y5rhZSQQeqzQww8v
=ILU2
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.16-20250522' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-05-22
this is a pull request of 22 patches for net-next/main.
The series by Biju Das contains 19 patches and adds RZ/G3E CANFD
support to the rcar_canfd driver.
The patch by Vincent Mailhol adds a struct data_bittiming_params to
group FD parameters as a preparation patch for CAN-XL support.
Felix Maurer's patch imports tst-filter from can-tests into the kernel
self tests and Vincent Mailhol adds support for physical CAN
interfaces.
linux-can-next-for-6.16-20250522
* tag 'linux-can-next-for-6.16-20250522' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
selftests: can: test_raw_filter.sh: add support of physical interfaces
selftests: can: Import tst-filter from can-tests
can: dev: add struct data_bittiming_params to group FD parameters
can: rcar_canfd: Add RZ/G3E support
can: rcar_canfd: Enhance multi_channel_irqs handling
can: rcar_canfd: Add external_clk variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add sh variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add struct rcanfd_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add shared_can_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add ch_interface_mode variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add {nom,data}_bittiming variables to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_cftml variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_aflpn variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add rnc_field_width variable to struct rcar_canfd_hw_info
can: rcar_canfd: Update RCANFD_GAFLCFG macro
can: rcar_canfd: Add rcar_canfd_setrnc()
can: rcar_canfd: Drop the mask operation in RCANFD_GAFLCFG_SETRNC macro
can: rcar_canfd: Update RCANFD_GERFL_ERR macro
can: rcar_canfd: Drop RCANFD_GAFLCFG_GETRNC macro
can: rcar_canfd: Use of_get_available_child_by_name()
...
====================
Link: https://patch.msgid.link/20250522084128.501049-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCaDBPTwAKCRCRxhvAZXjc
om0+AQDMxKLweJXplqQQ7jxuvW2dEa60YpE2EalEKWGg9YA3KgEA3nI4kyKMKn7Y
PRFXgIcKvhs62oJLKsq8SGQUqExqvAE=
=atEw
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Use folios for symlinks in the page cache
FUSE already uses folios for its symlinks. Mirror that conversion
in the generic code and the NFS code. That lets us get rid of a few
folio->page->folio conversions in this path, and some of the few
remaining users of read_cache_page() / read_mapping_page()
- Try and make a few filesystem operations killable on the VFS
inode->i_mutex level
- Add sysctl vfs_cache_pressure_denom for bulk file operations
Some workloads need to preserve more dentries than we currently
allow through out sysctl interface
A HDFS servers with 12 HDDs per server, on a HDFS datanode startup
involves scanning all files and caching their metadata (including
dentries and inodes) in memory. Each HDD contains approximately 2
million files, resulting in a total of ~20 million cached dentries
after initialization
To minimize dentry reclamation, they set vfs_cache_pressure to 1.
Despite this configuration, memory pressure conditions can still
trigger reclamation of up to 50% of cached dentries, reducing the
cache from 20 million to approximately 10 million entries. During
the subsequent cache rebuild period, any HDFS datanode restart
operation incurs substantial latency penalties until full cache
recovery completes
To maintain service stability, more dentries need to be preserved
during memory reclamation. The current minimum reclaim ratio (1/100
of total dentries) remains too aggressive for such workload. This
patch introduces vfs_cache_pressure_denom for more granular cache
pressure control
The configuration [vfs_cache_pressure=1,
vfs_cache_pressure_denom=10000] effectively maintains the full 20
million dentry cache under memory pressure, preventing datanode
restart performance degradation
- Avoid some jumps in inode_permission() using likely()/unlikely()
- Avid a memory access which is most likely a cache miss when
descending into devcgroup_inode_permission()
- Add fastpath predicts for stat() and fdput()
- Anonymous inodes currently don't come with a proper mode causing
issues in the kernel when we want to add useful VFS debug assert.
Fix that by giving them a proper mode and masking it off when we
report it to userspace which relies on them not having any mode
- Anonymous inodes currently allow to change inode attributes because
the VFS falls back to simple_setattr() if i_op->setattr isn't
implemented. This means the ownership and mode for every single
user of anon_inode_inode can be changed. Block that as it's either
useless or actively harmful. If specific ownership is needed the
respective subsystem should allocate anonymous inodes from their
own private superblock
- Raise SB_I_NODEV and SB_I_NOEXEC on the anonymous inode superblock
- Add proper tests for anonymous inode behavior
- Make it easy to detect proper anonymous inodes and to ensure that
we can detect them in codepaths such as readahead()
Cleanups:
- Port pidfs to the new anon_inode_{g,s}etattr() helpers
- Try to remove the uselib() system call
- Add unlikely branch hint return path for poll
- Add unlikely branch hint on return path for core_sys_select
- Don't allow signals to interrupt getdents copying for fuse
- Provide a size hint to dir_context for during readdir()
- Use writeback_iter directly in mpage_writepages
- Update compression and mtime descriptions in initramfs
documentation
- Update main netfs API document
- Remove useless plus one in super_cache_scan()
- Remove unnecessary NULL-check guards during setns()
- Add separate separate {get,put}_cgroup_ns no-op cases
Fixes:
- Fix typo in root= kernel parameter description
- Use KERN_INFO for infof()|info_plog()|infofc()
- Correct comments of fs_validate_description()
- Mark an unlikely if condition with unlikely() in
vfs_parse_monolithic_sep()
- Delete macro fsparam_u32hex()
- Remove unused and problematic validate_constant_table()
- Fix potential unsigned integer underflow in fs_name()
- Make file-nr output the total allocated file handles"
* tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (43 commits)
fs: Pass a folio to page_put_link()
nfs: Use a folio in nfs_get_link()
fs: Convert __page_get_link() to use a folio
fs/read_write: make default_llseek() killable
fs/open: make do_truncate() killable
fs/open: make chmod_common() and chown_common() killable
include/linux/fs.h: add inode_lock_killable()
readdir: supply dir_context.count as readdir buffer size hint
vfs: Add sysctl vfs_cache_pressure_denom for bulk file operations
fuse: don't allow signals to interrupt getdents copying
Documentation: fix typo in root= kernel parameter description
include/cgroup: separate {get,put}_cgroup_ns no-op case
kernel/nsproxy: remove unnecessary guards
fs: use writeback_iter directly in mpage_writepages
fs: remove useless plus one in super_cache_scan()
fs: add S_ANON_INODE
fs: remove uselib() system call
device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission()
fs/fs_parse: Remove unused and problematic validate_constant_table()
fs: touch up predicts in inode_permission()
...
Use prime 3 for length to make offset slowly drift away.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Acked-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new -z argument to specify max IOV size. By default, use
single large IOV.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add CXL RAS Features support. Features include "patrol scrub control",
"error check scrub", "perform maintenance", and "memory sparing". This
support connects the RAS Featurs to EDAC.
CXL spec 3.2 section 8.2.10.9.11.1 describes the device patrol scrub
control feature. The device patrol scrub proactively locates and makes
corrections to errors in regular cycle.
Allow specifying the number of hours within which the patrol scrub must be
completed, subject to minimum and maximum limits reported by the device.
Also allow disabling scrub allowing trade-off error rates against
performance.
Add support for patrol scrub control on CXL memory devices.
Register with the EDAC device driver, which retrieves the scrub attribute
descriptors from EDAC scrub and exposes the sysfs scrub control attributes
to userspace. For example, scrub control for the CXL memory device
"cxl_mem0" is exposed in /sys/bus/edac/devices/cxl_mem0/scrubX/.
Additionally, add support for region-based CXL memory patrol scrub control.
CXL memory regions may be interleaved across one or more CXL memory
devices. For example, region-based scrub control for "cxl_region1" is
exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.
[dj: A few formatting fixes from Jonathan]
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Co-developed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Shiju Jose <shiju.jose@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20250521124749.817-4-shiju.jose@huawei.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add a basic test for the ability to mmap /sys/kernel/btf/vmlinux.
Ensure that the data is valid BTF and that it is padded with zero.
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20250520-vmlinux-mmap-v5-2-e8c941acc414@isovalent.com
Add test generic_10 for covering new control command of UBLK_U_CMD_UPDATE_SIZE.
Add 'update_size -s|--size size_in_bytes' sub-command on ublk utility for
supporting this feature, then verify the feature via generic_10.
Cc: Omri Mann <omri@nvidia.com>
Cc: Jared Holzman <jholzman@nvidia.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250522163523.406289-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a ruleset which binds to various interface names via netdev-family
chains and flowtables and massage the notifiers by frequently renaming
interfaces to match these names. While doing so:
- Keep an 'nft monitor' running in background to receive the notifications
- Loop over 'nft list ruleset' to exercise ruleset dump codepath
- Have iperf running so the involved chains/flowtables see traffic
If supported, also test interface wildcard support separately by
creating a flowtable with 'wild*' interface spec and quickly add/remove
matching dummy interfaces.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace the existing VRF test with a more comprehensive one.
It tests following combinations:
- fib type (returns address type, e.g. unicast)
- fib oif (route output interface index
- both with and without 'iif' keyword (changes result, e.g.
'fib daddr type local' will be true when the destination address
is configured on the local machine, but
'fib daddr . iif type local' will only be true when the destination
address is configured on the incoming interface.
Add all types of addresses to test with for both ipv4 and ipv6:
- local address on the incoming interface
- local address on another interface
- local address on another interface thats part of a vrf
- address on another host
The ruleset stores obtained results from 'fib' in nftables sets and
then queries the sets to check that it has the expected results.
Perform one pass while packets are coming in on interface NOT part of
a VRF and then again when it was added and make sure fib returns the
expected routes and address types for the various addresses in the
setup.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
* kvm-arm64/misc-6.16:
: .
: Misc changes and improvements for 6.16:
:
: - Add a new selftest for the SVE host state being corrupted by a guest
:
: - Keep HCR_EL2.xMO set at all times for systems running with the kernel at EL2,
: ensuring that the window for interrupts is slightly bigger, and avoiding
: a pretty bad erratum on the AmpereOne HW
:
: - Replace a couple of open-coded on/off strings with str_on_off()
:
: - Get rid of the pKVM memblock sorting, which now appears to be superflous
:
: - Drop superflous clearing of ICH_LR_EOI in the LR when nesting
:
: - Add workaround for AmpereOne's erratum AC04_CPU_23, which suffers from
: a pretty bad case of TLB corruption unless accesses to HCR_EL2 are
: heavily synchronised
:
: - Add a per-VM, per-ITS debugfs entry to dump the state of the ITS tables
: in a human-friendly fashion
: .
KVM: arm64: Fix documentation for vgic_its_iter_next()
KVM: arm64: vgic-its: Add debugfs interface to expose ITS tables
arm64: errata: Work around AmpereOne's erratum AC04_CPU_23
KVM: arm64: nv: Remove clearing of ICH_LR<n>.EOI if ICH_LR<n>.HW == 1
KVM: arm64: Drop sort_memblock_regions()
KVM: arm64: selftests: Add test for SVE host corruption
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Replace ternary flags with str_on_off() helper
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/mte-frac:
: .
: Prevent FEAT_MTE_ASYNC from being accidently exposed to a guest,
: courtesy of Ben Horgan. From the cover letter:
:
: "The ID_AA64PFR1_EL1.MTE_frac field is currently hidden from KVM.
: However, when ID_AA64PFR1_EL1.MTE==2, ID_AA64PFR1_EL1.MTE_frac==0
: indicates that MTE_ASYNC is supported. On a host with
: ID_AA64PFR1_EL1.MTE==2 but without MTE_ASYNC support a guest with the
: MTE capability enabled will incorrectly see MTE_ASYNC advertised as
: supported. This series fixes that."
: .
KVM: selftests: Confirm exposing MTE_frac does not break migration
KVM: arm64: Make MTE_frac masking conditional on MTE capability
arm64/sysreg: Expose MTE_frac so that it is visible to KVM
Signed-off-by: Marc Zyngier <maz@kernel.org>
scm_rights.c has various patterns of tests to exercise GC.
Let's add cases where SO_PASSRIGHTS is disabled.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk->sk_txrehash is only used for TCP.
Let's restrict SO_TXREHASH to TCP to reflect this.
Later, we will make sk_txrehash a part of the union for other
protocol families.
Note that we need to modify BPF selftest not to get/set
SO_TEREHASH for non-TCP sockets.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- Rename test from eventfd_chek_flag_cloexec_and_nonblock to
eventfd_check_flag_cloexec_and_nonblock.
- Make the RDWR‐flag comment declarative:
“The kernel automatically adds the O_RDWR flag.”
- Update semaphore‐flag failure message to:
“eventfd semaphore flag check failed: …”
Link: https://lkml.kernel.org/r/20250513074411.6965-1-seokwoo.chung130@gmail.com
Signed-off-by: Ryan Chung <seokwoo.chung130@gmail.com>
Reviewed-by: Wen Yang <wen.yang@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kdamond.update_schemes_tried_regions() reads and stores tried regions
information out of address order. It makes debugging a test failure
difficult. Change the behavior to do the reading and writing in the
address order.
Link: https://lkml.kernel.org/r/20250513002715.40126-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Higgins <brendan.higgins@linux.dev>
Cc: David Gow <davidgow@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The map_fixed_noreplace test does two blocks of test starting from a
mapping of 5 pages at the base address, logging a test result for each
initial mapping. These are logged with the same test name, causing test
automation software to see two reports for the same test in a single run.
Tweak the log message for the second one to deduplicate.
Link: https://lkml.kernel.org/r/20250518-selftests-mm-map-fixed-noreplace-dup-v1-1-1a11a62c5e9f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Let's test some basic functionality using /dev/mem. These tests will
implicitly cover some PAT (Page Attribute Handling) handling on x86.
These tests will only run when /dev/mem access to the first two pages in
physical address space is possible and allowed; otherwise, the tests are
skipped.
On current x86-64 with PAT inside a VM, all tests pass:
TAP version 13
1..6
# Starting 6 tests from 1 test cases.
# RUN pfnmap.madvise_disallowed ...
# OK pfnmap.madvise_disallowed
ok 1 pfnmap.madvise_disallowed
# RUN pfnmap.munmap_split ...
# OK pfnmap.munmap_split
ok 2 pfnmap.munmap_split
# RUN pfnmap.mremap_fixed ...
# OK pfnmap.mremap_fixed
ok 3 pfnmap.mremap_fixed
# RUN pfnmap.mremap_shrink ...
# OK pfnmap.mremap_shrink
ok 4 pfnmap.mremap_shrink
# RUN pfnmap.mremap_expand ...
# OK pfnmap.mremap_expand
ok 5 pfnmap.mremap_expand
# RUN pfnmap.fork ...
# OK pfnmap.fork
ok 6 pfnmap.fork
# PASSED: 6 / 6 tests passed.
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
However, we are able to trigger:
[ 27.888251] x86/PAT: pfnmap:1790 freeing invalid memtype [mem 0x00000000-0x00000fff]
There are probably more things worth testing in the future, such as
MAP_PRIVATE handling. But this set of tests is sufficient to cover most
of the things we will rework regarding PAT handling.
Link: https://lkml.kernel.org/r/20250509153033.952746-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Dev Jain <dev.jain@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test redirection logic. All supported and unsupported redirect combinations
are tested for success and failure respectively.
BPF_MAP_TYPE_SOCKMAP
BPF_MAP_TYPE_SOCKHASH
x
sk_msg-to-egress
sk_msg-to-ingress
sk_skb-to-egress
sk_skb-to-ingress
x
AF_INET, SOCK_STREAM
AF_INET6, SOCK_STREAM
AF_INET, SOCK_DGRAM
AF_INET6, SOCK_DGRAM
AF_UNIX, SOCK_STREAM
AF_UNIX, SOCK_DGRAM
AF_VSOCK, SOCK_STREAM
AF_VSOCK, SOCK_SEQPACKET
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-5-a1ea723f7e7e@rbox.co
Instead of piggybacking on test_sockmap_listen, introduce
test_sockmap_redir especially for sockmap redirection tests.
Suggested-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-4-a1ea723f7e7e@rbox.co
Add integer wrappers for convenient sockmap usage.
While there, fix misaligned trailing slashes.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-3-a1ea723f7e7e@rbox.co
Add function that returns string representation of socket's domain/type.
Suggested-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-2-a1ea723f7e7e@rbox.co
Handle af_unix in init_addr_loopback(). For pair creation, bind() the peer
socket to make SOCK_DGRAM connect() happy.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20250515-selftests-sockmap-redir-v3-1-a1ea723f7e7e@rbox.co
Cross-merge networking fixes after downstream PR (net-6.15-rc8).
Conflicts:
80f2ab46c2 ("irdma: free iwdev->rf after removing MSI-X")
4bcc063939 ("ice, irdma: fix an off by one in error handling code")
c24a65b6a2 ("iidc/ice/irdma: Update IDC to support multiple consumers")
https://lore.kernel.org/20250513130630.280ee6c5@canb.auug.org.au
No extra adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce SKIP_LLVM makefile variable that allows to avoid using llvm
dependencies when building BPF selftests. This is different from
existing feature-llvm, as the latter is a result of automatic detection
and should not be set by user explicitly.
Avoiding llvm dependencies could be useful for environments that do not
have them, given that as of now llvm dependencies are required only by
jit_disasm_helpers.c.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250522013813.125428-1-mykyta.yatsenko5@gmail.com
It was located in conntrack_vrf.sh because that already had the VRF bits.
Lets not add to this and move it to nft_fib.sh where this belongs.
No functional changes for the subtest intended.
The subtest is limited, it only covered 'fib oif'
(route output interface query) when the incoming interface is part
of a VRF.
Next we can extend it to cover 'fib type' for VRFs and also check fib
results when there is an unrelated VRF in same netns.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
fib can either lookup the interface id/name of the output interface that
would be used for the given address, or it can check for the type of the
address according to the fib, e.g. local, unicast, multicast and so on.
This can be used to e.g. make a locally configured address only reachable
through its interface.
Example: given eth0:10.1.1.1 and eth1:10.1.2.1 then 'fib daddr type' for
10.1.1.1 arriving on eth1 will be 'local', but 'fib daddr . iif type' is
expected to return 'unicast', whereas 'fib daddr' and 'fib daddr . iif'
are expected to indicate 'local' if such a packet arrives on eth0.
So far nft_fib.sh only covered oif/oifname, not type.
Repeat tests both with default and a policy (ip rule) based setup.
Also try to run all remaining tests even if a subtest has failed.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pipapo supports a more compact '4 bit group' format that is chosen when
the memory needed for the default exceeds a threshold (2mb).
Add coverage for those code paths, the existing tests use small sets that
are handled by the default representation.
This comes with a test script run-time increase, but I think its ok:
normal: 2m35s -> 3m9s
debug: 3m24s -> 5m29s (with KSFT_MACHINE_SLOW=yes).
Cc: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This test reproduces a scenario where HFSC queue length and backlog accounting
can become inconsistent when a peek operation triggers a dequeue and possible
drop before the parent qdisc updates its counters. The test sets up a DRR root
qdisc with an HFSC class, netem, and blackhole children, and uses Scapy to
inject a packet. It helps to verify that HFSC correctly tracks qlen and backlog
even when packets are dropped during peek-induced dequeue.
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250518222038.58538-3-xiyou.wangcong@gmail.com
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With commit 08699d20467b6 ("sched_ext: idle: Consolidate default idle
CPU selection kfuncs") allowing scx_bpf_select_cpu_dfl() to be invoked
from multiple contexts, update the test to validate that the kfunc
behaves correctly when used from ops.enqueue() and via BPF test_run.
Additionally, rename the test to enq_select_cpu, dropping "fails" from
the name, as the logic has now been inverted.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Allow the user to specify a physical interface through the $CANIF
environment variable. Add a $BITRATE environment variable set with a
default value of 500000.
If $CANIF is omitted or if it starts with vcan (e.g. vcan1), the test
will use the virtual can interface type. Otherwise, it will assume
that the provided interface is a physical can interface.
For example:
CANIF=can1 BITRATE=1000000 ./test_raw_filter.sh
will run set the can1 interface with a bitrate of one million and run
the tests on it.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tests for the can subsystem have been in the can-tests repository[1] so
far. Start moving the tests to kernel selftests by importing the current
tst-filter test. The test is now named test_raw_filter and is substantially
updated to be more aligned with the kernel selftests, follow the coding
style, and simplify the validation of received CAN frames. We also include
documentation of the test design. The test verifies that the single filters
on raw CAN sockets work as expected.
We intend to import more tests from can-tests and add additional test cases
in the future. The goal of moving the CAN selftests into the tree is to
align the tests more closely with the kernel, improve testing of CAN in
general, and to simplify running the tests automatically in the various
kernel CI systems.
[1]: https://github.com/linux-can/can-tests
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/87d289f333cba7bbcc9d69173ea1c320e4b5c3b8.1747833283.git.fmaurer@redhat.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Usage of longjmp() was added to ensure that teardown is always run in
commit 63e6b2a423 ("selftests/harness: Run TEARDOWN for ASSERT failures")
However instead of calling longjmp() to the teardown handler it is easier to
just call the teardown handler directly from __bail().
Any potential duplicate teardown invocations are harmless as the actual
handler will only ever be executed once since
commit fff37bd32c ("selftests/harness: Fix fixture teardown").
Additionally this removes a incompatibility with nolibc,
which does not support setjmp()/longjmp().
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-12-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
To get rid of setjmp()/longjmp(), the variant and self need to be usable
from __bail().
Make them available from the test metadata.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-11-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
To get rid of setjmp()/longjmp(), the teardown logic needs to be usable
from __bail(). Introduce a new callback for it.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-10-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
To get rid of setjmp()/longjmp(), the teardown logic needs to be usable
from __bail(). To access the atomic teardown conditional from there,
move it into the test metadata.
This also allows the removal of "setup_completed".
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-9-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Make the kselftest harness compatible with nolibc which does not implement
signals by replacing the signal logic with pidfds.
The code also becomes simpler.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-7-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
__sync_bool_compare_and_swap() is deprecated and requires libatomic on
GCC. Compiler toolchains don't necessarily have libatomic available, so
avoid this requirement by using atomics that don't need libatomic.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-6-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The pointers to the wrappers are stored in function pointers,
preventing them from actually being inlined.
Remove the inline qualifier, aligning these wrappers with the other
functions defined through macros.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-5-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
With -Wmissing-prototypes the compiler will warn about non-static
functions which don't have a prototype defined.
As they are not used from a different compilation unit they don't need to
be defined globally.
Avoid the issue by marking the functions static.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-4-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
For tests without fixtures the variant argument is unused.
This is intentional, prevent to compiler from complaining.
Example warning:
harness-selftest.c: In function 'wrapper_standalone_pass':
../kselftest_harness.h:181:52: error: unused parameter 'variant' [-Werror=unused-parameter]
181 | struct __fixture_variant_metadata *variant) \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~
../kselftest_harness.h:156:25: note: in expansion of macro '__TEST_IMPL'
156 | #define TEST(test_name) __TEST_IMPL(test_name, -1)
| ^~~~~~~~~~~
harness-selftest.c:15:1: note: in expansion of macro 'TEST'
15 | TEST(standalone_pass) {
| ^~~~
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-3-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
All comments in this file use C89 comment style.
Except for this one. Change it to get one step closer to C89
compatibility.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-2-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add a selftest for the kselftest harness itself so any changes can be
validated.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250505-nolibc-kselftest-harness-v4-1-ee4dd5257135@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Only the standard POSIX modes are supported.
No extensions nor the (noop) "b" from ISO C are accepted.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-13-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Not all configurations support namespaces, so skip the tests where
necessary. Also if the tests are running without privileges.
Enable the namespace configuration for those architectures where it is not
enabled by default.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-12-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-11-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-10-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-9-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-8-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-7-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-6-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-5-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-4-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The %m format can be used to format the current errno.
It is non-standard but supported by other commonly used libcs like glibc and
musl, so applications do rely on them.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-2-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
This is used in various selftests and will be handy when integrating
those with nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250428-nolibc-misc-v2-1-3c043eeab06c@linutronix.de
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add nolibc support for m68k. Should be helpful for nommu where
linking libc can bloat even hello world to the point where you get
an OOM just trying to load it.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://lore.kernel.org/r/20250426224738.284874-1-daniel@0x0f.com
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Add a simple test for generating coredumps via AF_UNIX sockets.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-9-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add PIDFD_INFO_COREDUMP infrastructure so we can use it in tests.
Link: https://lore.kernel.org/20250516-work-coredump-socket-v8-8-664f3caf2516@kernel.org
Acked-by: Luca Boccassi <luca.boccassi@gmail.com>
Reviewed-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There is a spelling mistake in a fail error message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250520080657.30726-1-colin.i.king@gmail.com
The prctl.h ABI header was slightly updated during the development of
the interface. In particular the "immutable" parameter became a bit in
the option argument.
Synchronize prctl.h ABI header again and make use of the definition in
the testsuite and "perf bench futex".
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250517151455.1065363-5-bigeasy@linutronix.de
Use TAP output for easier automated testing.
Suggested-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250517151455.1065363-3-bigeasy@linutronix.de
Use TAP output for easier automated testing.
Suggested-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250517151455.1065363-2-bigeasy@linutronix.de
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgqSbkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGr6sH/1ICAvlin1GuxffE
ISVNz3xhXQpXG2k8yl9r0umpdCfPQbGrxm30vZyuIDNutY/FuMvkIqfu+Z1NnLg0
GidZW015LtXrp7/puKtTnUD5CPSjdETMXig+Q7c1PrxkkmHwz8sBbbm173AIDbDB
t7wwqSEUQh2AIDouGwN+DXB+6bR2FoOXb/k/njmtappIwR3rBc2f1HQJnP095rKO
5AKw1c9DMv5Wq2cEdBOCP48e4CFZEIN1ycW0nvtjpnOmcPOJjLoEothRbntQolqF
udtj5UeTGdAJqmjigv7KHmlrmFNe+GqBq4+beHl5MRxhBaT2uGGaM9jCJiSxT3Jx
sHyYYr8=
=Ddma
-----END PGP SIGNATURE-----
Merge tag 'v6.15-rc7' into x86/core, to pick up fixes
Pick up build fixes from upstream to make this tree more testable.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Add vector related tests with the ISA extension standard template.
However, the vector registers are bit tricky as the register length is
variable based on vlenb value of the system. That's why the macros are
defined with a default and overidden with actual value at runtime.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250430-kvm_selftest_improve-v3-3-eea270ff080b@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Currently, the sbi_pmu_test continues if the exception type is illegal
instruction because access to hpmcounter will generate that. However
illegal instruction exception may occur due to the other reasons
which should result in test assertion.
Use the stval to decode the exact type of instructions and which csrs are
being accessed if it is csr access instructions. Assert in all cases
except if it is a csr access instructions that access valid PMU related
registers.
Take this opportunity to remove the CSR_CYCLEH reference as the test is
compiled for RV64 only.
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250430-kvm_selftest_improve-v3-2-eea270ff080b@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The current exeception register structure in selftests are missing
few registers (e.g stval). Instead of adding it manually, change
the ex_regs to align with pt_regs to make it future proof.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250430-kvm_selftest_improve-v3-1-eea270ff080b@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
Cover three recent cases:
1. missing ops locking for the lowers during netdev_sync_lower_features
2. missing locking for dev_set_promiscuity (plus netdev_ops_assert_locked
with a comment on why/when it's needed)
3. rcu lock during team_change_rx_flags
Verified that each one triggers when the respective fix is reverted.
Not sure about the placement, but since it all relies on teaming,
added to the teaming directory.
One ugly bit is that I add NETIF_F_LRO to netdevsim; there is no way
to trigger netdev_sync_lower_features without it.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Link: https://patch.msgid.link/20250516232205.539266-1-stfomichev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend split BTF test to cover case where we create split BTF on top of
existing split BTF and add info to it; ensure that such BTF can be
created and handled by searching within it, dumping/comparing to expected.
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250519165935.261614-3-alan.maguire@oracle.com
Update the allowed_cpus selftest to include a check to validate the
behavior of scx_bpf_select_cpu_and() when invoked via a BPF test_run
call.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add test for covering UBLK_AUTO_BUF_REG_FALLBACK:
- pass '--auto_zc_fallback' to null target, which requires both F_AUTO_BUF_REG
and F_SUPPORT_ZERO_COPY for handling UBLK_AUTO_BUF_REG_FALLBACK
- add ->buf_index() method for returning invalid buffer index to trigger
UBLK_AUTO_BUF_REG_FALLBACK
- add generic_09 for running the test
- add --auto_zc_fallback test in stress_03/stress_04/stress_05
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable UBLK_F_AUTO_BUF_REG support for ublk utility by argument `--auto_zc`,
meantime support this feature in null, loop and stripe target code.
Add function test generic_08 for covering basic UBLK_F_AUTO_BUF_REG feature.
Also cover UBLK_F_AUTO_BUF_REG in stress_03, stress_04 and stress_05 test too.
'fio/t/io_uring -p0 /dev/ublkb0' shows that F_AUTO_BUF_REG can improve
IOPS by 50% compared with F_SUPPORT_ZERO_COPY in my test VM.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250520045455.515691-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
__run_io_and_remove() is used in several stress tests for running heavy
IO vs. removing device meantime.
However, sequential `readwrite` is taken in the fio script, which isn't
correct, we should take random IO for saturating ublk device.
Also turns out '--num_jobs=4' isn't stressful enough, so change it to
'--num_jobs=$(nproc)'.
Finally we don't cover single queue test in `test_stress_02.sh`, so add
single queue test which can trigger request tag recycling easier.
With above change the issue in #1 can be reproduced reliably in stress_02.sh.
Link:https://lore.kernel.org/linux-block/mruqwpf4tqenkbtgezv5oxwq7ngyq24jzeyqy4ixzvivatbbxv@4oh2wzz4e6qn/#1
Cc: Jared Holzman <jholzman@nvidia.com>
Cc: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250519031620.245749-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Some common KVM test cases are supported on LoongArch now as following:
coalesced_io_test
demand_paging_test
dirty_log_perf_test
dirty_log_test
guest_print_test
hardware_disable_test
kvm_binary_stats_test
kvm_create_max_vcpus
kvm_page_table_test
memslot_modification_stress_test
memslot_perf_test
set_memory_region_test
And other test cases are not supported by LoongArch such as rseq_test,
since it is not supported on LoongArch physical machine either.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add ucall test support for LoongArch, ucall method on LoongArch uses
undefined mmio area. It will cause vCPU exiting to hypervisor so that
hypervisor can communicate with vCPU.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add core KVM selftests support for LoongArch, it includes exception
handler, mmu page table setup and vCPU startup entry support.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add KVM selftests header files for LoongArch, including processor.h
and kvm_util_arch.h. It mainly contains LoongArch CSR register and page
table entry definition.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
On LoongArch system, 16K page is used in general and GVA width is 47 bit
while GPA width is 47 bit also, here add new VM mode VM_MODE_P47V47_16K.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Different subsystems may call cgroup_rstat_updated() within the same
cgroup, resulting in a tree of pending updates from multiple subsystems.
When one of these subsystems is flushed via cgroup_rstat_flushed(), all
other subsystems with pending updates on the tree will also be flushed.
Change the paradigm of having a single rstat tree for all subsystems to
having separate trees for each subsystem. This separation allows for
subsystems to perform flushes without the side effects of other subsystems.
As an example, flushing the cpu stats will no longer cause the memory stats
to be flushed and vice versa.
In order to achieve subsystem-specific trees, change the tree node type
from cgroup to cgroup_subsys_state pointer. Then remove those pointers from
the cgroup and instead place them on the css. Finally, change update/flush
functions to make use of the different node type (css). These changes allow
a specific subsystem to be associated with an update or flush. Separate
rstat trees will now exist for each unique subsystem.
Since updating/flushing will now be done at the subsystem level, there is
no longer a need to keep track of updated css nodes at the cgroup level.
The list management of these nodes done within the cgroup (rstat_css_list
and related) has been removed accordingly.
Conditional guards for checking validity of a given css were placed within
css_rstat_updated/flush() to prevent undefined behavior occuring from kfunc
usage in bpf programs. Guards were also placed within css_rstat_init/exit()
in order to help consolidate calls to them. At call sites for all four
functions, the existing guards were removed.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add the test counts to the JSON output from kunit.py. For example:
...
"git_branch": "kselftest",
"misc":
{
"tests": 2,
"passed": 1.
"failed": 1,
"crashed": 0,
"skipped": 0,
"errors": 0,
}
...
To output the JSON using the following command:
./tools/testing/kunit/kunit.py run example --json
This has been requested by KUnit users. The counts are in a "misc"
field because the JSON output needs to be compliant with the KCIDB
submission guide. There are no counts fields but there is a "misc" field
in the guide.
Link: https://lore.kernel.org/r/20250516201615.1237037-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a test case to verify x86's bus lock exit functionality, which is now
supported on both Intel and AMD. Trigger bus lock exits by performing a
split-lock access, i.e. an atomic access that splits two cache lines.
Verify that the correct number of bus lock exits are generated, and that
the counter is incremented correctly and at the appropriate time based on
the underlying architecture.
Generate bus locks in both L1 and L2 (if nested virtualization is enabled),
as SVM's functionality in particular requires non-trivial logic to do the
right thing when running nested VMs.
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Co-developed-by: Manali Shukla <manali.shukla@amd.com>
Signed-off-by: Manali Shukla <manali.shukla@amd.com>
Link: https://lore.kernel.org/r/20250502050346.14274-6-manali.shukla@amd.com
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove llvm dependencies from binaries that do not use llvm libraries.
Filter out libxml2 from llvm dependencies, as it seems that
it is not actually used. This patch reduced link dependencies
for BPF selftests.
The next line was adding llvm dependencies to every target in the
makefile, while the only targets that require those are test
runnners (test_progs, test_progs-no_alu32,...):
```
$(OUTPUT)/$(TRUNNER_BINARY): LDLIBS += $$(LLVM_LDLIBS)
```
Before this change:
ldd linux/tools/testing/selftests/bpf/veristat
linux-vdso.so.1 (0x00007ffd2c3fd000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007fe1dcf89000)
libz.so.1 => /lib64/libz.so.1 (0x00007fe1dcf6f000)
libm.so.6 => /lib64/libm.so.6 (0x00007fe1dce94000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007fe1dcddd000)
libxml2.so.2 => /lib64/libxml2.so.2 (0x00007fe1dcc54000)
libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007fe1dca00000)
libc.so.6 => /lib64/libc.so.6 (0x00007fe1dc600000)
/lib64/ld-linux-x86-64.so.2 (0x00007fe1dcfb1000)
liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fe1dc9d4000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fe1dcc38000)
After:
ldd linux/tools/testing/selftests/bpf/veristat
linux-vdso.so.1 (0x00007ffc83370000)
libelf.so.1 => /lib64/libelf.so.1 (0x00007f4b87515000)
libz.so.1 => /lib64/libz.so.1 (0x00007f4b874fb000)
libc.so.6 => /lib64/libc.so.6 (0x00007f4b87200000)
libzstd.so.1 => /lib64/libzstd.so.1 (0x00007f4b87444000)
/lib64/ld-linux-x86-64.so.2 (0x00007f4b8753d000)
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250516195522.311769-1-mykyta.yatsenko5@gmail.com
- update MAINTAINERS entry for ovpn
- extend selftest with more cases
- avoid crash in selftest in case of getaddrinfo() failure
- fix ndo_start_xmit return value on error
- set ignore_df flag for IPv6 packets
- drop useless reg_state check in keepalive worker
- retain skb's dst when entering xmit function
- fix check on skb_to_sgvec_nomark() return value
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEmavcbPjUEuTeX8D8C3DlOqA41YcFAmgly3gACgkQC3DlOqA4
1Yce5QgAq0UK170Dk8yrq97PevhAc35OekOvZ2kC7rS/Mp7E7de6puVR0Xawh9rU
xLJC9ldAXCFS8jKzW/9yd6hJqe03KXVULtHD0tdOCoxkp5jfQCx+RWG9BaHljs9T
NWIqKP93Fe83qqWgnSjtG1lTPPNbx++JD61xvnl/eMEh/xU0kVeuhxuqhdyoj1NT
8IzSSFIJBnh4LtgCzGxhNkA8Ar+SShKdFkc+4nL3AoD9DTRx5NiFDfG6OKWTK75h
GA0VB3Ip7Jt8PTFBdxXYcEEe7sYXGtjkiNUHYa+sv4VdU83BTfYgyBi+6PeIADjq
N9BI418qfSkt2VBV1cYHZwe+O89fvw==
=nC7o
-----END PGP SIGNATURE-----
Merge tag 'ovpn-net-next-20250515' of https://github.com/OpenVPN/ovpn-net-next
Antonio Quartulli says:
====================
ovpn: pull request for net-next: ovpn 2025-05-15
this is a new version of the previous pull request.
These time I have removed the fixes that we are still discussing,
so that we don't hold the entire series back.
There is a new fix though: it's about properly checking the return value
of skb_to_sgvec_nomark(). I spotted the issue while testing pings larger
than the iface's MTU on a TCP VPN connection.
I have added various Closes and Link tags where applicable, so
that we have references to GitHub tickets and other public discussions.
Since I have resent the PR, I have also added Andrew's Reviewed-by to
the first patch.
Please pull or let me know if something should be changed!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Patchset highlights:
- update MAINTAINERS entry for ovpn
- extend selftest with more cases
- avoid crash in selftest in case of getaddrinfo() failure
- fix ndo_start_xmit return value on error
- set ignore_df flag for IPv6 packets
- drop useless reg_state check in keepalive worker
- retain skb's dst when entering xmit function
- fix check on skb_to_sgvec_nomark() return value
In the sigpipe test, we expect send() to fail, but we do not check if
send() fails with the errno we expect (EPIPE).
Add this check and repeat the send() in case of EINTR as we do in other
tests.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-4-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the other peer calls shutdown(SHUT_RD), there is a chance that
the send() call could occur before the message carrying the close
information arrives over the transport. In such cases, the send()
might still succeed. To avoid this race, let's retry the send() call
a few times, ensuring the test is more reliable.
Sleep a little before trying again to avoid flooding the other peer
and filling its receive buffer, causing false-negative.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-3-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The timeout API uses signals, so we have documented not to use sleep(),
but we can use nanosleep(2) since POSIX.1 explicitly specifies that it
does not interact with signals.
Let's provide timeout_usleep() for that.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20250514141927.159456-2-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use MGLRU's debugfs interface to do access tracking instead of
page_idle. The logic to use the page_idle bitmap is left in, as it is
useful for kernels that do not have MGLRU built in.
When MGLRU is enabled, page_idle will report pages as still idle even
after being accessed, as MGLRU doesn't necessarily clear the Idle folio
flag when accessing an idle page, so the test will not attempt to use
page_idle if MGLRU is enabled but otherwise not usable.
Aging pages with MGLRU is much faster than marking pages as idle with
page_idle.
Co-developed-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-8-jthoughton@google.com
[sean: print parsed features, not raw string]
Signed-off-by: Sean Christopherson <seanjc@google.com>
libcgroup.o is built separately from KVM selftests and cgroup selftests,
so different compiler flags used by the different selftests will not
conflict with each other.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-7-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an API in the cgroups library to find the root of a specific
controller. KVM selftests will use the API to find the memory controller.
Search for the controller on both v1 and v2 mounts, as KVM selftests'
usage will be completely oblivious of v1 versus v2.
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-6-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
KVM selftests will soon need to use some of the cgroup creation and
deletion functionality from cgroup_util.
Suggested-by: David Matlack <dmatlack@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20250508184649.2576210-5-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move a handful of helpers out of cgroup_util.c and into test_memcontrol.c
that have nothing to with cgroups in general, in anticipation of making
cgroup_util.c a generic library that can be used by other selftests.
Make read_text() and write_text() non-static so test_memcontrol.c can
use them.
Signed-off-by: James Houghton <jthoughton@google.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-4-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an option to skip sanity check of number of still idle pages,
and set it by default to skip, in case hypervisor or NUMA balancing
is detected.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Co-developed-by: James Houghton <jthoughton@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-3-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extract the guts of thp_configured() and get_trans_hugepagesz() to
standalone helpers so that the core logic can be reused for other sysfs
files, e.g. to query numa_balancing.
Opportunistically assert that the initial fscanf() read at least one byte,
and add a comment explaining the second call to fscanf().
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Link: https://lore.kernel.org/r/20250508184649.2576210-2-jthoughton@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
On ARM64, when running with --configs '36*SRCU-P', I noticed that only 1 instance
instead of 36 for starting.
Fix it by checking for Image files, instead of bzImage which ARM does
not seem to have. With this I see all 36 instances running at the same
time in the batch.
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Back in the day, rcutorture was about the only thing that tested off-stack
CPU masks, but now any arm64 system with more than 256 CPUs tests it
full time. In fact, it is necessary to hack the kernel to prevent such
a system from testing off-stack CPU masks. This means that there is
no longer much point in rcutorture going out of its way to test this.
And given the differences in how CPUMASK_OFFSTACK is enabled in x86 and
arm64, rcutorture would need to go out of its way.
This commit therefore removes CONFIG_CPUMASK_OFFSTACK=y (and the
CONFIG_MAXSMP=y required to enable it on x86) from TREE01.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The TREE01.boot nr_cpus kernel boot parameter has been set to 43 for
more than seven years, but it can cause RCU CPU stall warnings on arm64,
most of the time involving the stop-machine subsystem. This should
not be too surprising, given that this causes 43 vCPUs to spin with
interrupts disabled when there are only eight physical CPUs.
The point of this CPU overcommit is to test the ability of expedited RCU
grace period initialization to handle races with incoming CPUs that have
never previously been online. But limiting to 17 CPUs instead of 43
allows time for this code to be exercised, and eliminates (or at least
greatly reduces) the incidence of RCU CPU stall warnings on arm64.
So this commit therefore sets nr_cpus=17 in TREE01.boot.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Different architectures capitalize their splats differently. Who knew?
This commit therefore checks for both arm64 "Call trace:" and x86
"Call Trace:".
Reported-by: Joel Fernandes <joelagnelf@nvidia.com>
Closes: https://lore.kernel.org/all/553c33d8-2b51-4772-8aef-97b0163bc78e@nvidia.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
This commit adds a --do-rcu-rust parameter to torture.sh, which invokes
a rust_doctests_kernel kunit run. Note that kunit wants a clean source
tree, so this runs "make mrproper", which might come as a surprise to
some users. Should there be a --mrproper parameter to torture.sh to make
the user explicitly ask for it?
Co-developed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Right now, torture.sh runs normal runs unconditionally, which can be slow
and thus annoying when you only want to test --kcsan or --kasan runs.
This commit therefore adds a --do-normal argument so that "--kcsan
--do-no-kasan --do-no-normal" runs only KCSAN runs. Note that specifying
"--do-no-kasan --do-no-kcsan --do-no-normal" gets normal runs, so you
should not try to use this as a synonym for --do-none.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
When running 'make' in tools/testing/selftests/arm64/ without explicitly
setting the OUTPUT variable, the build system will creates test
directories (e.g., /bti) in the root filesystem due to OUTPUT defaulting
to an empty string. This causes unintended pollution of the root directory.
This patch adds proper handling for the OUTPUT variable: Sets OUTPUT
to the current directory (.) if not specified
Signed-off-by: tanze <tanze@kylinos.cn>
Link: https://lore.kernel.org/r/20250515051839.3409658-1-tanze@kylinos.cn
Signed-off-by: Will Deacon <will@kernel.org>
When MTE is supported but MTE_ASYMM is not (ID_AA64PFR1_EL1.MTE == 2)
ID_AA64PFR1_EL1.MTE_frac == 0xF indicates MTE_ASYNC is unsupported
and MTE_frac == 0 indicates it is supported.
As MTE_frac was previously unconditionally read as 0 from the guest
and user-space, check that using SET_ONE_REG to set it to 0 succeeds
but does not change MTE_frac from unsupported (0xF) to supported (0).
This is required as values originating from KVM from user-space must
be accepted to avoid breaking migration.
Also, to allow this MTE field to be tested, enable KVM_ARM_CAP_MTE
for the set_id_regs test. No effect on existing tests is expected.
Signed-off-by: Ben Horgan <ben.horgan@arm.com>
Link: https://lore.kernel.org/r/20250512114112.359087-4-ben.horgan@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
'realpath' is not always available, fallback to 'readlink -f' if is not
available. They seem to work equally well in this context.
Link: https://lore.kernel.org/r/20250318160510.3441646-1-yosry.ahmed@linux.dev
Signed-off-by: Yosry Ahmed <yosry.ahmed@linux.dev>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
A few more fixes for the locking changes trickling in. Nothing
too alarming, I suspect those will continue for another release.
Other than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error "nvsp_rndis_pkt_complete error status: 2"
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=UUcH
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth and wireless.
A few more fixes for the locking changes trickling in. Nothing too
alarming, I suspect those will continue for another release. Other
than that things are slowing down nicely.
Current release - fix to a fix:
- Bluetooth: hci_event: use key encryption size when its known
- tools: ynl-gen: allow multi-attr without nested-attributes again
Current release - regressions:
- locking fixes:
- lock lower level devices when updating features
- eth: bnxt_en: bring back rtnl_lock() in the bnxt_open() path
- devmem: fix panic when Netlink socket closes after module unload
Current release - new code bugs:
- eth: txgbe: fixes for FW communication on new AML devices
Previous releases - always broken:
- sched: flush gso_skb list too during ->change(), avoid potential
null-deref on reconfig
- wifi: mt76: disable NAPI on driver removal
- hv_netvsc: fix error 'nvsp_rndis_pkt_complete error status: 2'"
* tag 'net-6.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
net: devmem: fix kernel panic when netlink socket close after module unload
tsnep: fix timestamping with a stacked DSA driver
net/tls: fix kernel panic when alloc_page failed
bnxt_en: bring back rtnl_lock() in the bnxt_open() path
mlxsw: spectrum_router: Fix use-after-free when deleting GRE net devices
wifi: mac80211: Set n_channels after allocating struct cfg80211_scan_request
octeontx2-pf: Do not reallocate all ntuple filters
wifi: mt76: mt7925: fix missing hdr_trans_tlv command for broadcast wtbl
wifi: mt76: disable napi on driver removal
Drivers: hv: vmbus: Remove vmbus_sendpacket_pagebuffer()
hv_netvsc: Remove rmsg_pgcnt
hv_netvsc: Preserve contiguous PFN grouping in the page buffer array
hv_netvsc: Use vmbus_sendpacket_mpb_desc() to send VMBus messages
Drivers: hv: Allow vmbus_sendpacket_mpb_desc() to create multiple ranges
octeontx2-af: Fix CGX Receive counters
net: ethernet: mtk_eth_soc: fix typo for declaration MT7988 ESW capability
net: libwx: Fix FW mailbox unknown command
net: libwx: Fix FW mailbox reply timeout
net: txgbe: Fix to calculate EEPROM checksum for AML devices
octeontx2-pf: macsec: Fix incorrect max transmit size in TX secy
...
To increase code coverage, extend the ovpn selftests with the following
cases:
* connect UDP peers using a mix of IPv6 and IPv4 at the transport layer
* run full test with tunnel MTU equal to transport MTU (exercising
IP layer fragmentation)
* ping "LAN IP" served by VPN peer ("LAN behind a client" test case)
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
getaddrinfo() may fail with error code different from EAI_FAIL
or EAI_NONAME, however in this case we still try to free the
results object, thus leading to a crash.
Fix this by bailing out on any possible error.
Fixes: 959bc330a4 ("testing/selftests: add test tool and scripts for ovpn module")
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Most tracepoints in the kernel are created with TRACE_EVENT(). The
TRACE_EVENT() macro (and DECLARE_EVENT_CLASS() and DEFINE_EVENT() where in
reality, TRACE_EVENT() is just a helper macro that calls those other two
macros), will create not only a tracepoint (the function trace_<event>()
used in the kernel), it also exposes the tracepoint to user space along
with defining what fields will be saved by that tracepoint.
There are a few places that tracepoints are created in the kernel that are
not exposed to userspace via tracefs. They can only be accessed from code
within the kernel. These tracepoints are created with DEFINE_TRACE()
Most of these tracepoints end with "_tp". This is useful as when the
developer sees that, they know that the tracepoint is for in-kernel only
(meaning it can only be accessed inside the kernel, either directly by the
kernel or indirectly via modules and BPF programs) and is not exposed to
user space.
Instead of making this only a process to add "_tp", enforce it by making
the DECLARE_TRACE() append the "_tp" suffix to the tracepoint. This
requires adding DECLARE_TRACE_EVENT() macros for the TRACE_EVENT() macro
to use that keeps the original name.
Link: https://lore.kernel.org/all/20250418083351.20a60e64@gandalf.local.home/
Cc: netdev <netdev@vger.kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: David Ahern <dsahern@kernel.org>
Cc: Juri Lelli <juri.lelli@gmail.com>
Cc: Breno Leitao <leitao@debian.org>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/20250510163730.092fad5b@gandalf.local.home
Acked-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Patch series "eliminate mmap() retry merge, add .mmap_prepare hook", v2.
During the mmap() of a file-backed mapping, we invoke the underlying
driver file's mmap() callback in order to perform driver/file system
initialisation of the underlying VMA.
This has been a source of issues in the past, including a significant
security concern relating to unwinding of error state discovered by Jann
Horn, as fixed in commit 5de195060b ("mm: resolve faulty mmap_region()
error path behaviour") which performed the recent, significant, rework of
mmap() as a whole.
However, we have had a fly in the ointment remain - drivers have a great
deal of freedom in the .mmap() hook to manipulate VMA state (as well as
page table state).
This can be problematic, as we can no longer reason sensibly about VMA
state once the call is complete (the ability to do - anything - here does
rather interfere with that).
In addition, callers may choose to do odd or unusual things which might
interfere with subsequent steps in the mmap() process, and it may do so
and then raise an error, requiring very careful unwinding of state about
which we can make no assumptions.
Rather than providing such an open-ended interface, this series provides
an alternative, far more restrictive one - we expose a whitelist of fields
which can be adjusted by the driver, along with immutable state upon which
the driver can make such decisions:
struct vm_area_desc {
/* Immutable state. */
struct mm_struct *mm;
unsigned long start;
unsigned long end;
/* Mutable fields. Populated with initial state. */
pgoff_t pgoff;
struct file *file;
vm_flags_t vm_flags;
pgprot_t page_prot;
/* Write-only fields. */
const struct vm_operations_struct *vm_ops;
void *private_data;
};
The mmap logic then updates the state used to either merge with a VMA or
establish a new VMA based upon this logic.
This is achieved via new file hook .mmap_prepare(), which is, importantly,
invoked very early on in the mmap() process.
If an error arises, we can very simply abort the operation with very
little unwinding of state required.
The existing logic contains another, related, peccadillo - since the
.mmap() callback might do anything, it may also cause a previously
unmergeable VMA to become mergeable with adjacent VMAs.
Right now the logic will retry a merge like this only if the driver
changes VMA flags, and changes them in such a way that a merge might
succeed (that is, the flags are not 'special', that is do not contain any
of the flags specified in VM_SPECIAL).
This has also been the source of a great deal of pain - it's hard to
reason about an .mmap() callback that might do - anything - but it's also
hard to reason about setting up a VMA and writing to the maple tree, only
to do it again utilising a great deal of shared state.
Since .mmap_prepare() sets fields before the first merge is even
attempted, the use of this callback obviates the need for this retry merge
logic.
A driver may only specify .mmap_prepare() or the deprecated .mmap()
callback. In future we may add futher callbacks beyond .mmap_prepare() to
faciliate all use cass as we convert drivers.
In researching this change, I examined every .mmap() callback, and
discovered only a very few that set VMA state in such a way that a. the
VMA flags changed and b. this would be mergeable.
In the majority of cases, it turns out that drivers are mapping kernel
memory and thus ultimately set VM_PFNMAP, VM_MIXEDMAP, or other
unmergeable VM_SPECIAL flags.
Of those that remain I identified a number of cases which are only
applicable in DAX, setting the VM_HUGEPAGE flag:
* dax_mmap()
* erofs_file_mmap()
* ext4_file_mmap()
* xfs_file_mmap()
For this remerge to not occur and to impact users, each of these cases
would require a user to mmap() files using DAX, in parts, immediately
adjacent to one another.
This is a very unlikely usecase and so it does not appear to be worthwhile
to adjust this functionality accordingly.
We can, however, very quickly do so if needed by simply adding an
.mmap_prepare() callback to these as required.
There are two further non-DAX cases I idenitfied:
* orangefs_file_mmap() - Clears VM_RAND_READ if set, replacing with
VM_SEQ_READ.
* usb_stream_hwdep_mmap() - Sets VM_DONTDUMP.
Both of these cases again seem very unlikely to be mmap()'d immediately
adjacent to one another in a fashion that would result in a merge.
Finally, we are left with a viable case:
* secretmem_mmap() - Set VM_LOCKED, VM_DONTDUMP.
This is viable enough that the mm selftests trigger the logic as a matter
of course. Therefore, this series replace the .secretmem_mmap() hook with
.secret_mmap_prepare().
This patch (of 3):
Provide a means by which drivers can specify which fields of those
permitted to be changed should be altered to prior to mmap()'ing a range
(which may either result from a merge or from mapping an entirely new
VMA).
Doing so is substantially safer than the existing .mmap() calback which
provides unrestricted access to the part-constructed VMA and permits
drivers and file systems to do 'creative' things which makes it hard to
reason about the state of the VMA after the function returns.
The existing .mmap() callback's freedom has caused a great deal of issues,
especially in error handling, as unwinding the mmap() state has proven to
be non-trivial and caused significant issues in the past, for instance
those addressed in commit 5de195060b ("mm: resolve faulty mmap_region()
error path behaviour").
It also necessitates a second attempt at merge once the .mmap() callback
has completed, which has caused issues in the past, is awkward, adds
overhead and is difficult to reason about.
The .mmap_prepare() callback eliminates this requirement, as we can update
fields prior to even attempting the first merge. It is safer, as we
heavily restrict what can actually be modified, and being invoked very
early in the mmap() process, error handling can be performed safely with
very little unwinding of state required.
The .mmap_prepare() and deprecated .mmap() callbacks are mutually
exclusive, so we permit only one to be invoked at a time.
Update vma userland test stubs to account for changes.
Link: https://lkml.kernel.org/r/cover.1746792520.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/adb36a7c4affd7393b2fc4b54cc5cfe211e41f71.1746792520.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test_memcg_protection() function is used for the test_memcg_min and
test_memcg_low sub-tests. This function generates a set of parent/child
cgroups like:
parent: memory.min/low = 50M
child 0: memory.min/low = 75M, memory.current = 50M
child 1: memory.min/low = 25M, memory.current = 50M
child 2: memory.min/low = 0, memory.current = 50M
After applying memory pressure, the function expects the following actual
memory usages.
parent: memory.current ~= 50M
child 0: memory.current ~= 29M
child 1: memory.current ~= 21M
child 2: memory.current ~= 0
In reality, the actual memory usages can differ quite a bit from the
expected values. It uses an error tolerance of 10% with the
values_close() helper.
Both the test_memcg_min and test_memcg_low sub-tests can fail sporadically
because the actual memory usage exceeds the 10% error tolerance. Below
are a sample of the usage data of the tests runs that fail.
Child Actual usage Expected usage %err
----- ------------ -------------- ----
1 16990208 22020096 -12.9%
1 17252352 22020096 -12.1%
0 37699584 30408704 +10.7%
1 14368768 22020096 -21.0%
1 16871424 22020096 -13.2%
The current 10% error tolerenace might be right at the time
test_memcontrol.c was first introduced in v4.18 kernel, but memory reclaim
have certainly evolved quite a bit since then which may result in a bit
more run-to-run variation than previously expected.
Increase the error tolerance to 15% for child 0 and 20% for child 1 to
minimize the chance of this type of failure. The tolerance is bigger for
child 1 because an upswing in child 0 corresponds to a smaller %err than a
similar downswing in child 1 due to the way %err is used in
values_close().
Before this patch, a 100 test runs of test_memcontrol produced the
following results:
17 not ok 1 test_memcg_min
22 not ok 2 test_memcg_low
After applying this patch, there were no test failure for test_memcg_min
and test_memcg_low in 100 test runs. However, these tests may still fail
once in a while if the memory usage goes beyond the newly extended range.
Link: https://lkml.kernel.org/r/20250502010443.106022-3-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Michal Koutný <mkoutny@suse.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "memcg: Fix test_memcg_min/low test failures", v8.
The test_memcontrol selftest consistently fails its test_memcg_low
sub-test (with memory_recursiveprot enabled) and sporadically fails its
test_memcg_min sub-test. This patchset fixes the test_memcg_min and
test_memcg_low failures by adjusting the test_memcontrol selftest to fix
these test failures.
This patch (of 8):
The test_memcontrol selftest consistently fails its test_memcg_low
sub-test due to the fact that its 3rd test child cgroup which have a
memmory.low of 0 have low event count. This happens when
memory_recursiveprot mount option is enabled which is the default setting
used by systemd to mount cgroup2 filesystem.
This issue was originally fixed by commit cdc69458a5 ("cgroup: account
for memory_recursiveprot in test_memcg_low()"). It was later reverted by
commit 1d09069f53 ("selftests: memcg: expect no low events in
unprotected sibling") expecting the memory reclaim code would be fixed.
However, it turns out the unprotected cgroup may still have some residual
effective memory.low protection depending on the memory.low settings in
its parent and its siblings. As a result, low events may still be
triggered.
One way to fix the test failure is to revert the revert commit. However,
Michal suggested that it might be better to ignore the low event count
with memory_recursiveprot enabled as low event may or may not happen
depending on the actual test configuration.
Modify the test_memcontrol.c to ignore low event in the 3rd child cgroup
with memory_recursiveprot on.
The 4th child cgroup has no memory usage and so has an effective low of 0.
It has no low event count because the mem_cgroup_below_low() check in
shrink_node_memcgs() is skipped as mem_cgroup_below_min() returns true.
If we ever change mem_cgroup_below_min() in such a way that it no longer
skips the no usage case, we will have to add code to explicitly skip it.
With this patch applied, the test_memcg_low sub-test finishes successfully
without failure in most cases. Though both test_memcg_low and
test_memcg_min sub-tests may still fail occasionally if the memory.current
values fall outside of the expected ranges.
Link: https://lkml.kernel.org/r/20250502010443.106022-1-longman@redhat.com
Link: https://lkml.kernel.org/r/20250502010443.106022-2-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Suggested-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
These tests:
"SOCK_STREAM ioctl(SIOCOUTQ) 0 unsent bytes"
"SOCK_SEQPACKET ioctl(SIOCOUTQ) 0 unsent bytes"
output: "Unexpected 'SIOCOUTQ' value, expected 0, got 64 (CLIENT)".
They test that the SIOCOUTQ ioctl reports 0 unsent bytes after the data
have been received by the other side. However, sometimes there is a delay
in updating this "unsent bytes" counter, and the test fails even though
the counter properly goes to 0 several milliseconds later.
The delay occurs in the kernel because the used buffer notification
callback virtio_vsock_tx_done(), called upon receipt of the data by the
other side, doesn't update the counter itself. It delegates that to
a kernel thread (via vsock->tx_work). Sometimes that thread is delayed
more than the test expects.
Change the test to poll SIOCOUTQ until it returns 0 or a timeout occurs.
Signed-off-by: Konstantin Shkolnyy <kshk@linux.ibm.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: 18ee44ce97 ("test/vsock: add ioctl unsent bytes test")
Link: https://patch.msgid.link/20250507151456.2577061-1-kshk@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for devmem TX in ncdevmem.
This is a combination of the ncdevmem from the devmem TCP series RFCv1
which included the TX path, and work by Stan to include the netlink API
and refactored on top of his generic memory_provider support.
Signed-off-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250508004830.4100853-10-almasrymina@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Prepare to resolve conflicts with an upstream series of fixes that conflict
with pending x86 changes:
6f5bf947ba Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Right now these are performed in kernel/fork.c which is odd and a
violation of separation of concerns, as well as preventing us from
integrating this and related logic into userland VMA testing going
forward.
There is a fly in the ointment - nommu - mmap.c is not compiled if
CONFIG_MMU not set, and neither is vma.c.
To square the circle, let's add a new file - vma_init.c. This will be
compiled for both CONFIG_MMU and nommu builds, and will also form part of
the VMA userland testing.
This allows us to de-duplicate code, while maintaining separation of
concerns and the ability for us to userland test this logic.
Update the VMA userland tests accordingly, additionally adding a
detach_free_vma() helper function to correctly detach VMAs before freeing
them in test code, as this change was triggering the assert for this.
[akpm@linux-foundation.org: remove stray newline, per Liam]
Link: https://lkml.kernel.org/r/f97b3a85a6da0196b28070df331b99e22b263be8.1745853549.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
There are peculiarities within the kernel where what is very clearly mm
code is performed elsewhere arbitrarily.
This violates separation of concerns and makes it harder to refactor code
to make changes to how fundamental initialisation and operation of mm
logic is performed.
One such case is the creation of the VMA containing the initial stack upon
execve()'ing a new process. This is currently performed in
__bprm_mm_init() in fs/exec.c.
Abstract this operation to create_init_stack_vma(). This allows us to
limit use of vma allocation and free code to fork and mm only.
We previously did the same for the step at which we relocate the initial
stack VMA downwards via relocate_vma_down(), now we move the initial VMA
establishment too.
Take the opportunity to also move insert_vm_struct() to mm/vma.c as it's
no longer needed anywhere outside of mm.
Link: https://lkml.kernel.org/r/118c950ef7a8dd19ab20a23a68c3603751acd30e.1745853549.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "move all VMA allocation, freeing and duplication logic to
mm", v3.
Currently VMA allocation, freeing and duplication exist in kernel/fork.c,
which is a violation of separation of concerns, and leaves these functions
exposed to the rest of the kernel when they are in fact internal
implementation details.
Resolve this by moving this logic to mm, and making it internal to vma.c,
vma.h.
This also allows us, in future, to provide userland testing around this
functionality.
We additionally abstract dup_mmap() to mm, being careful to ensure
kernel/fork.c acceses this via the mm internal header so it is not exposed
elsewhere in the kernel.
As part of this change, also abstract initial stack allocation performed
in __bprm_mm_init() out of fs code into mm via the
create_init_stack_vma(), as this code uses vm_area_alloc() and
vm_area_free().
In order to do so sensibly, we introduce a new mm/vma_exec.c file, which
contains the code that is shared by mm and exec. This file is added to
both memory mapping and exec sections in MAINTAINERS so both sets of
maintainers can maintain oversight.
As part of this change, we also move relocate_vma_down() to mm/vma_exec.c
so all shared mm/exec functionality is kept in one place.
We add code shared between nommu and mmu-enabled configurations in order
to share VMA allocation, freeing and duplication code correctly while also
keeping these functions available in userland VMA testing.
This is achieved by adding a mm/vma_init.c file which is also compiled by
the userland tests.
This patch (of 4):
There is functionality that overlaps the exec and memory mapping
subsystems. While it properly belongs in mm, it is important that exec
maintainers maintain oversight of this functionality correctly.
We can establish both goals by adding a new mm/vma_exec.c file which
contains these 'glue' functions, and have fs/exec.c import them.
As a part of this change, to ensure that proper oversight is achieved, add
the file to both the MEMORY MAPPING and EXEC & BINFMT API, ELF sections.
scripts/get_maintainer.pl can correctly handle files in multiple entries
and this neatly handles the cross-over.
[akpm@linux-foundation.org: fix comment typo]
Link: https://lkml.kernel.org/r/80f0d0c6-0b68-47f9-ab78-0ab7f74677fc@lucifer.local
Link: https://lkml.kernel.org/r/cover.1745853549.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/91f2cee8f17d65214a9d83abb7011aa15f1ea690.1745853549.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add an unit test to verify the recent mmap_changing ABI breakage.
Note that I used some tricks here and there to make the test simple, e.g.
I abused UFFDIO_MOVE on top of shmem with the fact that I know what I want
to test will be even earlier than the vma type check. Rich comments were
added to explain trivial details.
Before that fix, -EAGAIN would have been written to the copy field most of
the time but not always; the test should be able to reliably trigger the
outlier case. After the fix, it's written always, the test verifies that
making sure corresponding field (e.g. copy.copy for UFFDIO_COPY) is
updated.
[akpm@linux-foundation.org: coding-style cleanups]
Link: https://lkml.kernel.org/r/20250424215729.194656-3-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "kexec: introduce Kexec HandOver (KHO)", v8.
Kexec today considers itself purely a boot loader: When we enter the new
kernel, any state the previous kernel left behind is irrelevant and the
new kernel reinitializes the system.
However, there are use cases where this mode of operation is not what we
actually want. In virtualization hosts for example, we want to use kexec
to update the host kernel while virtual machine memory stays untouched.
When we add device assignment to the mix, we also need to ensure that
IOMMU and VFIO states are untouched. If we add PCIe peer to peer DMA, we
need to do the same for the PCI subsystem. If we want to kexec while an
SEV-SNP enabled virtual machine is running, we need to preserve the VM
context pages and physical memory. See "pkernfs: Persisting guest memory
and kernel/device state safely across kexec" Linux Plumbers Conference
2023 presentation for details:
https://lpc.events/event/17/contributions/1485/
To start us on the journey to support all the use cases above, this patch
implements basic infrastructure to allow hand over of kernel state across
kexec (Kexec HandOver, aka KHO). As a really simple example target, we
use memblock's reserve_mem.
With this patchset applied, memory that was reserved using "reserve_mem"
command line options remains intact after kexec and it is guaranteed to
reside at the same physical address.
== Alternatives ==
There are alternative approaches to (parts of) the problems above:
* Memory Pools [1] - preallocated persistent memory region + allocator
* PRMEM [2] - resizable persistent memory regions with fixed metadata
pointer on the kernel command line + allocator
* Pkernfs [3] - preallocated file system for in-kernel data with fixed
address location on the kernel command line
* PKRAM [4] - handover of user space pages using a fixed metadata page
specified via command line
All of the approaches above fundamentally have the same problem: They
require the administrator to explicitly carve out a physical memory
location because they have no mechanism outside of the kernel command line
to pass data (including memory reservations) between kexec'ing kernels.
KHO provides that base foundation. We will determine later whether we
still need any of the approaches above for fast bulk memory handover of
for example IOMMU page tables. But IMHO they would all be users of KHO,
with KHO providing the foundational primitive to pass metadata and bulk
memory reservations as well as provide easy versioning for data.
== Overview ==
We introduce a metadata file that the kernels pass between each other.
How they pass it is architecture specific. The file's format is a
Flattened Device Tree (fdt) which has a generator and parser already
included in Linux. KHO is enabled in the kernel command line by `kho=on`.
When the root user enables KHO through
/sys/kernel/debug/kho/out/finalize, the kernel invokes callbacks to every
KHO users to register preserved memory regions, which contain drivers'
states.
When the actual kexec happens, the fdt is part of the image set that we
boot into. In addition, we keep "scratch regions" available for kexec:
physically contiguous memory regions that are guaranteed to not have any
memory that KHO would preserve. The new kernel bootstraps itself using
the scratch regions and sets all handed over memory as in use. When
drivers initialize that support KHO, they introspect the fdt, restore
preserved memory regions, and retrieve their states stored in the
preserved memory.
== Limitations ==
Currently KHO is only implemented for file based kexec. The kernel
interfaces in the patch set are already in place to support user space
kexec as well, but it is still not implemented it yet inside kexec tools.
== How to Use ==
To use the code, please boot the kernel with the "kho=on" command line
parameter. KHO will automatically create scratch regions. If you want to
set the scratch size explicitly you can use "kho_scratch=" command line
parameter. For instance, "kho_scratch=16M,512M,256M" will reserve a 16
MiB low memory scratch area, a 512 MiB global scratch region, and 256 MiB
per NUMA node scratch regions on boot.
Make sure to have a reserved memory range requested with reserv_mem
command line option, for example, "reserve_mem=64m:4k:n1".
Then before you invoke file based "kexec -l", finalize KHO FDT:
# echo 1 > /sys/kernel/debug/kho/out/finalize
You can preview the generated FDT using `dtc`,
# dtc /sys/kernel/debug/kho/out/fdt
# dtc /sys/kernel/debug/kho/out/sub_fdts/memblock
`dtc` is available on ubuntu by `sudo apt-get install device-tree-compiler`.
Now kexec into the new kernel,
# kexec -l Image --initrd=initrd -s
# kexec -e
(The order of KHO finalization and "kexec -l" does not matter.)
The new kernel will boot up and contain the previous kernel's reserve_mem
contents at the same physical address as the first kernel.
You can also review the FDT passed from the old kernel,
# dtc /sys/kernel/debug/kho/in/fdt
# dtc /sys/kernel/debug/kho/in/sub_fdts/memblock
This patch (of 17):
To denote areas that were reserved for kernel use either directly with
memblock_reserve_kern() or via memblock allocations.
Link: https://lore.kernel.org/lkml/20250424083258.2228122-1-changyuanl@google.com/
Link: https://lore.kernel.org/lkml/aAeaJ2iqkrv_ffhT@kernel.org/
Link: https://lore.kernel.org/lkml/35c58191-f774-40cf-8d66-d1e2aaf11a62@intel.com/
Link: https://lore.kernel.org/lkml/20250424093302.3894961-1-arnd@kernel.org/
Link: https://lkml.kernel.org/r/20250509074635.3187114-1-changyuanl@google.com
Link: https://lkml.kernel.org/r/20250509074635.3187114-2-changyuanl@google.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Co-developed-by: Changyuan Lyu <changyuanl@google.com>
Signed-off-by: Changyuan Lyu <changyuanl@google.com>
Cc: Alexander Graf <graf@amazon.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Ashish Kalra <ashish.kalra@amd.com>
Cc: Ben Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Betkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Gowans <jgowans@amazon.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Rutland <mark.rutland@arm.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pratyush Yadav <ptyadav@amazon.de>
Cc: Rob Herring <robh@kernel.org>
Cc: Saravana Kannan <saravanak@google.com>
Cc: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleinxer <tglx@linutronix.de>
Cc: Thomas Lendacky <thomas.lendacky@amd.com>
Cc: Will Deacon <will@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Change the type of 'dwRegionSize' in wp_init() and wp_free() from int to
long to match callers that pass long or unsigned long long values.
wp_addr_range function is left unchanged because it passes 'dwRegionSize'
parameter directly to pagemap_ioctl, which expects an int.
This patch does not fix any actual known issues. It aligns parameter
types with their actual usage and avoids any potential future issues.
Link: https://lkml.kernel.org/r/20250427102639.39978-1-siddarthsgml@gmail.com
Signed-off-by: Siddarth G <siddarthsgml@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Remove the rp_filter configuration from MPTCP tests, as it is now handled
by setup_ns.
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250508081910.84216-7-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the rp_filter configuration in netfilter lib, as setup_ns already
sets it appropriately by default
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250508081910.84216-6-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some SRv6 tests manually set up network namespaces and disable rp_filter.
Since the setup_ns library function already handles rp_filter configuration,
convert these SRv6 tests to use setup_ns and remove the redundant rp_filter
settings.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Link: https://patch.msgid.link/20250508081910.84216-5-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch bareudp testing to use setup_ns, which sets up rp_filter by default.
This allows us to remove the manual rp_filter configuration from the script.
Additionally, since setup_ns handles namespace naming and cleanup, we no
longer need a separate cleanup function. We also move the trap setup earlier
in the script, before the test setup begins.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508081910.84216-4-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The following tests use setup_ns to create a network namespace, which
will disables rp_filter immediately after namespace creation. Therefore,
it is no longer necessary to disable rp_filter again within these individual
tests.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508081910.84216-3-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some distributions enable rp_filter globally by default. To ensure consistent
behavior across environments, we explicitly disable it in several test cases.
This patch moves the rp_filter disabling logic to immediately after the
network namespace is initialized. With this change, individual test cases
with creating namespace via setup_ns no longer need to disable rp_filter
again.
This helps avoid redundancy and ensures test consistency.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250508081910.84216-2-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ping test flips checksum offload on and off.
Make sure the original value is restored if test fails.
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250508214005.1518013-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently rst2man is required to build bpf selftests, as the tool is
used by Makefile.docs. rst2man may be missing in some build
environments and is not essential for selftests. It makes sense to
allow user to skip building docs.
This patch adds SKIP_DOCS variable into bpf selftests Makefile that when
set to 1 allows skipping building docs, for example:
make -C tools/testing/selftests TARGETS=bpf SKIP_DOCS=1
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250510002450.365613-1-mykyta.yatsenko5@gmail.com
Tests:
- 458/p ld_dw: xor semi-random 64-bit imms, test 5
- 501/p scale: scale test 1
- 502/p scale: scale test 2
fail in verbose mode due to bpf_vlog[] overflowing. These tests
generate large verifier logs that exceed the current buffer size,
causing them to fail to load.
Increase the size of the bpf_vlog[] buffer to accommodate larger
logs and prevent false failures during test runs with verbose output.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/e49267100f07f099a5877a3a5fc797b702bbaf0c.1747058195.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When running test_verifier with the -v flag and a test with
`expected_ret==VERBOSE_ACCEPT`, the opts.log_level is unintentionally
overwritten because the verbose flag takes precedence. This leads to
a mismatch in the expected and actual contents of bpf_vlog, causing
tests to fail incorrectly.
Reorder the conditional logic that sets opts.log_level to preserve
the expected log level and prevent it from being overridden by -v.
Signed-off-by: Gregory Bell <grbell@redhat.com>
Link: https://lore.kernel.org/r/182bf00474f817c99f968a9edb119882f62be0f8.1747058195.git.grbell@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
unshare userns in addition to mntns and verify that:
1. watching tmpfs mounted inside userns is allowed with any mark type
2. watching orig root with filesystem mark type is not allowed
3. watching mntns of orig userns is not allowed
4. watching mntns in userns where fanotify_init was called is allowed
mount events are only tested with the last case of mntns mark.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-9-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add helper to utils.c and use it in statmount userns tests.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-8-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add helper to utils.c and use it in mount-notify and statmount tests.
Linking with utils.c drags in a dependecy with libcap, so add it to the
Makefile of the tests.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-7-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Copy the fanotify uapi header files to the tools include dir
and define __kernel_fsid_t to decouple dependency with headers_install
and then remove the redundant re-definitions of fanotify macros.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-6-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Which are already defined in wrappers.h.
For now, the syscall defintions of mount_settattr() itself
remain in the test, which is the only test to use them.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-5-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
There was already duplicity in some of the defintions.
Remove syscall number defintions for __ia64__ that are
both stale and incorrect.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-4-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Copy the required headers files (mount.h, nsfs.h) to the tools
include dir and define the statmount/listmount syscall numbers
to decouple dependency with headers_install for the common cases.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-3-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This is not an overlayfs specific header.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/20250509133240.529330-2-amir73il@gmail.com
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Filesystem too small for a journal
mount: /mnt/D/: mount failed: Operation not permitted.
mount_setattr_test.c:1076:idmap_mount_tree_invalid:Expected system("mount -o loop -t ext4 /mnt/C/ext4.img /mnt/D/") (256) == 0 (0)
Signed-off-by: Christian Brauner <brauner@kernel.org>
CC mount_setattr_test
In file included from mount_setattr_test.c:24:
mount_setattr_test.c: In function ‘mount_setattr_mount_detached_mount_on_detached_mount_and_attach’:
mount_setattr_test.c:1850:60: error: ‘STATX_MNT_ID_UNIQUE’ undeclared (first use in this function); did you mean ‘STATX_MNT_ID’?
1850 | ASSERT_EQ(statx(fd_tree_subdir, "", AT_EMPTY_PATH, STATX_MNT_ID_UNIQUE, &stx), 0);
| ^~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:757:20: note: in definition of macro ‘__EXPECT’
757 | __typeof__(_expected) __exp = (_expected); \
| ^~~~~~~~~
mount_setattr_test.c:1850:9: note: in expansion of macro ‘ASSERT_EQ’
1850 | ASSERT_EQ(statx(fd_tree_subdir, "", AT_EMPTY_PATH, STATX_MNT_ID_UNIQUE, &stx), 0);
| ^~~~~~~~~
mount_setattr_test.c:1850:60: note: each undeclared identifier is reported only once for each function it appears in
1850 | ASSERT_EQ(statx(fd_tree_subdir, "", AT_EMPTY_PATH, STATX_MNT_ID_UNIQUE, &stx), 0);
| ^~~~~~~~~~~~~~~~~~~
../kselftest_harness.h:757:20: note: in definition of macro ‘__EXPECT’
757 | __typeof__(_expected) __exp = (_expected); \
| ^~~~~~~~~
mount_setattr_test.c:1850:9: note: in expansion of macro ‘ASSERT_EQ’
1850 | ASSERT_EQ(statx(fd_tree_subdir, "", AT_EMPTY_PATH, STATX_MNT_ID_UNIQUE, &stx), 0);
| ^~~~~~~~~
Signed-off-by: Christian Brauner <brauner@kernel.org>
CC mount_setattr_test
mount_setattr_test.c:176:19: error: redefinition of ‘sys_open_tree’
176 | static inline int sys_open_tree(int dfd, const char *filename, unsigned int flags)
| ^~~~~~~~~~~~~
In file included from mount_setattr_test.c:23:
../filesystems/overlayfs/wrappers.h:59:19: note: previous definition of ‘sys_open_tree’ with type ‘int(int, const char *, unsigned int)’
59 | static inline int sys_open_tree(int dfd, const char *filename, unsigned int flags)
Signed-off-by: Christian Brauner <brauner@kernel.org>
The ChaCha state matrix is 16 32-bit words. Currently it is represented
in the code as a raw u32 array, or even just a pointer to u32. This
weak typing is error-prone. Instead, introduce struct chacha_state:
struct chacha_state {
u32 x[16];
};
Convert all ChaCha and HChaCha functions to use struct chacha_state.
No functional changes.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Right now test_kmod has hardcoded dependencies on btrfs/xfs. That is not
optimal since you end up needing to select/build them, but it is not
really required since other fs could be selected for the testing. Also,
we can't change the default/driver module used for testing on
initialization.
Thus make it more generic: introduce two module parameters (start_driver
and start_test_fs), which allow to select which modules/fs to use for the
testing on test_kmod initialization. Then it's up to the user to select
which modules/fs to use for testing based on his config. However, keep
test_module as required default.
This way, config/modules becomes selectable as when the testing is done
from selftests (userspace).
While at it, also change trigger_config_run_type, since at module
initialization we already set the defaults at __kmod_config_init and
should not need to do it again in test_kmod_init(), thus we can avoid to
again set test_driver/test_fs.
Link: https://lkml.kernel.org/r/20250418165047.702487-1-herton@redhat.com
Signed-off-by: Herton R. Krzesinski <herton@redhat.com>
Reviewed-by: Luis Chambelrain <mcgrof@kernel.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
During cleanup, the value of /proc/sys/vm/nr_hugepages is currently being
set to 0. At the end of the test, if all tests pass, the original
nr_hugepages value is restored. However, if any test fails, it remains
set to 0.
With this patch, we ensure that the original nr_hugepages value is
restored during cleanup, regardless of whether the test passes or fails.
Link: https://lkml.kernel.org/r/20250410100748.2310-1-donettom@linux.ibm.com
Fixes: 29750f71a9 ("hugetlb_cgroup: add hugetlb_cgroup reservation tests")
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Cc: Li Wang <liwang@redhat.com>
Cc: "Ritesh Harjani (IBM)" <ritesh.list@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to support rebalancing and spanning stores using less than the
worst case number of nodes, we need to track more than just the vacant
height. Using only vacant height to reduce the worst case maple node
allocation count can lead to a shortcoming of nodes in the following
scenarios.
For rebalancing writes, when a leaf node becomes insufficient, it may be
combined with a sibling into a single node. This means that the parent
node which has entries for this children will lose one entry. If this
parent node was just meeting the minimum entries, losing one entry will
now cause this parent node to be insufficient. This leads to a cascading
operation of rebalancing at different levels and can lead to more node
allocations than simply using vacant height can return.
For spanning writes, a similar situation occurs. At the location at which
a spanning write is detected, the number of ancestor nodes may similarly
need to rebalanced into a smaller number of nodes and the same cascading
situation could occur.
To use less than the full height of the tree for the number of
allocations, we also need to track the height at which a non-leaf node
cannot become insufficient. This means even if a rebalance occurs to a
child of this node, it currently has enough entries that it can lose one
without any further action. This field is stored in the maple write state
as sufficient height. In mas_prealloc_calc() when figuring out how many
nodes to allocate, we check if the vacant node is lower in the tree than a
sufficient node (has a larger value). If it is, we cannot use the vacant
height and must use the difference in the height and sufficient height as
the basis for the number of nodes needed.
An off by one bug was also discovered in mast_overflow() where it is using
>= rather than >. This caused extra iterations of the
mas_spanning_rebalance() loop and lead to unneeded allocations. A test is
also added to check the number of allocations is correct.
Link: https://lkml.kernel.org/r/20250410191446.2474640-6-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In order to determine the store type for a maple tree operation, a walk of
the tree is done through mas_wr_walk(). This function descends the tree
until a spanning write is detected or we reach a leaf node. While
descending, keep track of the height at which we encounter a node with
available space. This is done by checking if mas->end is less than the
number of slots a given node type can fit.
Now that the height of the vacant node is tracked, we can use the
difference between the height of the tree and the height of the vacant
node to know how many levels we will have to propagate creating new nodes.
Update mas_prealloc_calc() to consider the vacant height and reduce the
number of worst-case allocations.
Rebalancing and spanning stores are not supported and fall back to using
the full height of the tree for allocations.
Update preallocation testing assertions to take into account vacant
height.
Link: https://lkml.kernel.org/r/20250410191446.2474640-4-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For the maple tree, the root node is defined to have a depth of 0 with a
height of 1. Each level down from the node, these values are incremented
by 1. Various code paths define a root with depth 1 which is inconsisent
with the definition. Modify the code to be consistent with this
definition.
In mas_spanning_rebalance(), l_mas.depth was being used to track the
height based on the number of iterations done in the main loop. This
information was then used in mas_put_in_tree() to set the height. Rather
than overload the l_mas.depth field to track height, simply keep track of
height in the local variable new_height and directly pass this to
mas_wmb_replace() which will be passed into mas_put_in_tree(). This
allows up to remove writes to l_mas.depth.
Link: https://lkml.kernel.org/r/20250410191446.2474640-3-sidhartha.kumar@oracle.com
Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prior to the recently applied commit that permits this merge,
mprotect()'ing a faulted VMA, adjacent to an unfaulted VMA, such that the
two share characteristics would fail to merge due to what appear to be
unintended consequences of commit 965f55dea0 ("mmap: avoid merging
cloned VMAs").
Now we have fixed this bug, assert that we can indeed merge anonymous VMAs
this way.
Also assert that forked source/target VMAs are equally rejected.
Previously, all empty target anon merges with one VMA faulted and the
other unfaulted would be rejected incorrectly, now we ensure that unforked
merge, but forked do not.
Additionally, add the new test file to the MEMORY MAPPING section in
MAINTAINERS, as these tests are explicitly memory mapping related.
Link: https://lkml.kernel.org/r/2b69330274a3b71721f7042c5eabe91143934415.1744104124.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The PROCMAP_QUERY ioctl() is very useful - it allows for binary access to
/proc/$pid/[s]maps data and thus convenient lookup of data contained
there.
This patch exposes this for convenient use by mm self tests so the state
of VMAs can easily be queried.
Link: https://lkml.kernel.org/r/ce83d877093d1fc594762cf4b82f0c27963030ee.1744104124.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Reviewed-by: Wei Yang <richard.weiyang@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "fix incorrectly disallowed anonymous VMA merges", v2.
It appears that we have been incorrectly rejecting merge cases for 15
years, apparently by mistake.
Imagine a range of anonymous mapped momemory divided into two VMAs like
this, with incompatible protection bits:
RW RWX
unfaulted faulted
|-----------|-----------|
| prev | vma |
|-----------|-----------|
mprotect(RW)
Now imagine mprotect()'ing vma so it is RW. This appears as if it should
merge, it does not.
Neither does this case, again mprotect()'ing vma RW:
RWX RW
faulted unfaulted
|-----------|-----------|
| vma | next |
|-----------|-----------|
mprotect(RW)
Nor:
RW RWX RW
unfaulted faulted unfaulted
|-----------|-----------|-----------|
| prev | vma | next |
|-----------|-----------|-----------|
mprotect(RW)
What's going on here?
In commit 5beb493052 ("mm: change anon_vma linking to fix multi-process
server scalability issue"), from 2010, Rik von Riel took careful care to
account for these cases - commenting that '[this is] easily overlooked:
when mprotect shifts the boundary, make sure the expanding vma has
anon_vma set if the shrinking vma had, to cover any anon pages imported.'
However, commit 965f55dea0 ("mmap: avoid merging cloned VMAs")
introduced a little over a year later, appears to have accidentally
disallowed this.
By adjusting the is_mergeable_anon_vma() function to avoid lock contention
across large trees of forked anon_vma's, this commit wrongly assumed the
VMA being checked (the ostensible merge 'target') should be faulted, that
is, have an anon_vma, and thus an anon_vma_chain list established, but
only of length 1.
This appears to have been unintentional, as disallowing empty target VMAs
like this across the board makes no sense.
We already have logic that accounts for this case, the same logic Rik
introduced in 2010, now via dup_anon_vma() (and ultimately
anon_vma_clone()), so there is no problem permitting this.
This series fixes this mistake and also ensures that scalability concerns
remain addressed by explicitly checking that whatever VMA is being merged
has not been forked.
A full set of self tests which reproduce the issue are provided, as well
as updating userland VMA tests to assert this behaviour.
The self tests additionally assert scalability concerns are addressed.
This patch (of 3):
anon_vma_chain's were introduced by Rik von Riel in commit 5beb493052
("mm: change anon_vma linking to fix multi-process server scalability
issue").
This patch was introduced in March 2010. As part of this change, careful
attention was made to the instance of mprotect() causing a VMA merge, with
one faulted (i.e. having anon_vma set) and another not:
/*
* Easily overlooked: when mprotect shifts the boundary,
* make sure the expanding vma has anon_vma set if the
* shrinking vma had, to cover any anon pages imported.
*/
In the modern VMA code, this is handled in dup_anon_vma() (and ultimately
anon_vma_clone()).
This case is one of the three configurations of adjacent VMA anon_vma
state that we might encounter on merge (where dst is the VMA which will be
merged into and src the one being merged into dst):
1. dst->anon_vma, src->anon_vma - These must be equal, no-op.
2. dst->anon_vma, !src->anon_vma - We simply use dst->anon_vma, no-op.
3. !dst->anon_vma, src->anon_vma - The case in question here.
In case 3, the instance addressed here - we duplicate the AVC connections
from src and place into dst.
However, in practice, we very often do NOT do this.
This appears to be due to an inadvertent consequence of the change
introduced by commit 965f55dea0 ("mmap: avoid merging cloned VMAs"),
introduced in May 2011.
This implies that this merge case was functional only for a little over a
year, and has since been broken for ~15 years.
Here, lock scalability concerns lead to us restricting anonymous merges
only to those VMAs with 1 entry in their vma->anon_vma_chain, that is, a
VMA that is not connected to any parent process's anon_vma.
The mergeability test looks like this:
static inline bool is_mergeable_anon_vma(struct anon_vma *anon_vma1,
struct anon_vma *anon_vma2, struct vm_area_struct *vma)
{
if ((!anon_vma1 || !anon_vma2) && (!vma ||
!vma->anon_vma || list_is_singular(&vma->anon_vma_chain)))
return true;
return anon_vma1 == anon_vma2;
}
However, we have a problem here - typically the vma passed here is the
destination VMA.
For instance in vma_merge_existing_range() we invoke:
can_vma_merge_left()
-> [ check that there is an immediately adjacent prior VMA ]
-> can_vma_merge_after()
-> is_mergeable_vma() for general attribute check
-> is_mergeable_anon_vma([ proposed anon_vma ], prev->anon_vma, prev)
So if we were considering a target unfaulted 'prev':
unfaulted faulted
|-----------|-----------|
| prev | vma |
|-----------|-----------|
This would call is_mergeable_anon_vma(NULL, vma->anon_vma, prev).
The list_is_singular() check for vma->anon_vma_chain, an empty list on
fault, would cause this merge to _fail_ even though all else indicates a
merge.
Equally a simple merge into a next VMA would hit the same problem:
faulted unfaulted
|-----------|-----------|
| vma | next |
|-----------|-----------|
can_vma_merge_right()
-> [ check that there is an immediately adjacent succeeding VMA ]
-> can_vma_merge_before()
-> is_mergeable_vma() for general attribute check
-> is_mergeable_anon_vma([ proposed anon_vma ], next->anon_vma, next)
For a 3-way merge, we'd also hit the same problem if it was configured like
this for instance:
unfaulted faulted unfaulted
|-----------|-----------|-----------|
| prev | vma | next |
|-----------|-----------|-----------|
As we'd call can_vma_merge_left() for prev, and can_vma_merge_right() for
next, both of which would fail.
vma_merge_new_range() (and relatedly, vma_expand()) are not impacted, as
the new VMA would never already be faulted (it is a proposed new range).
Because we already handle each of the aforementioned merge cases, and can
absolutely therefore deal with an existing VMA merge with !dst->anon_vma,
src->anon_vma, there is absolutely no reason to disallow this kind of
merge.
It seems that the intention of this patch is to ensure that, in the
instance of merging unfaulted VMAs with faulted ones, we never wish to do
so with those with multiple AVCs due to the fact that anon_vma lock's are
held across both parent and child anon_vma's (actually, the 'root' parent
anon_vma's lock is used).
In fact, the original commit alludes to this - "find_mergeable_anon_vma()
already considers this case".
In find_mergeable_anon_vma() however, we check the anon_vma which will be
merged from, if it is set, then we check
list_is_singular(vma->anon_vma_chain).
So to match this logic, update is_mergeable_anon_vma() to perform this
scalability check on the VMA whose anon_vma we ultimately merge into.
This matches existing behaviour with forked VMAs, only we no longer
wrongly disallow ALL empty target merges.
So we both allow merge cases and ensure the scalability check is correctly
applied.
We may wish to revisit these lock scalability concerns at a later date and
ensure they are still valid.
Additionally, correct userland VMA tests which were mistakenly not
asserting these cases correctly previously to now correctly assert this,
and to ensure vmg->anon_vma state is always consistent to account for
newly introduced asserts.
Link: https://lkml.kernel.org/r/cover.1744104124.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/18c756fc9eaf7ad082a710c91133b8346f8cd9a8.1744104124.git.lorenzo.stoakes@oracle.com
Fixes: 965f55dea0 ("mmap: avoid merging cloned VMAs")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In cgroup v2, memory and hugetlb usage reparenting is asynchronous. This
can cause test flakiness when immediately asserting usage after deleting a
child cgroup. To address this, add a helper function
`assert_with_retry()` that checks usage values with a timeout-based retry.
This improves test stability without relying on fixed sleep delays.
Also bump up the tolerance size to 7MB.
To avoid False Positives:
...
# Assert memory charged correctly for child only use.
# actual a = 11 MB
# expected a = 0 MB
# fail
# cleanup
# [FAIL]
not ok 11 hugetlb_reparenting_test.sh -cgroup-v2 # exit=1
# 0
# SUMMARY: PASS=10 SKIP=0 FAIL=1
Link: https://lkml.kernel.org/r/20250407084201.74492-1-liwang@redhat.com
Signed-off-by: Li Wang <liwang@redhat.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Cc: Waiman Long <longman@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest to verify the PAGEMAP_SCAN ioctl correctly reports guard
regions using the newly introduced PAGE_IS_GUARD flag.
Link: https://lkml.kernel.org/r/20250324065328.107678-4-avagin@google.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cppcheck warning:
int result is assigned to long long variable. If the variable is long long
to avoid loss of information, then you have loss of information.
This patch changes the type of page_size from 'unsigned int' to
'unsigned long' instead of using ULL suffixes. Changing hpage_size to
'unsigned long' was considered, but since gethugepage() expects an int,
this change was avoided.
Link: https://lkml.kernel.org/r/20250403101345.29226-1-siddarthsgml@gmail.com
Signed-off-by: Siddarth G <siddarthsgml@gmail.com>
Reported-by: David Binderman <dcb314@hotmail.com>
Closes: https://lore.kernel.org/all/AS8PR02MB10217315060BBFDB21F19643E9CA62@AS8PR02MB10217.eurprd02.prod.outlook.com/
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=UVgZ
-----END PGP SIGNATURE-----
Merge tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 ITS mitigation from Dave Hansen:
"Mitigate Indirect Target Selection (ITS) issue.
I'd describe this one as a good old CPU bug where the behavior is
_obviously_ wrong, but since it just results in bad predictions it
wasn't wrong enough to notice. Well, the researchers noticed and also
realized that thus bug undermined a bunch of existing indirect branch
mitigations.
Thus the unusually wide impact on this one. Details:
ITS is a bug in some Intel CPUs that affects indirect branches
including RETs in the first half of a cacheline. Due to ITS such
branches may get wrongly predicted to a target of (direct or indirect)
branch that is located in the second half of a cacheline. Researchers
at VUSec found this behavior and reported to Intel.
Affected processors:
- Cascade Lake, Cooper Lake, Whiskey Lake V, Coffee Lake R, Comet
Lake, Ice Lake, Tiger Lake and Rocket Lake.
Scope of impact:
- Guest/host isolation:
When eIBRS is used for guest/host isolation, the indirect branches
in the VMM may still be predicted with targets corresponding to
direct branches in the guest.
- Intra-mode using cBPF:
cBPF can be used to poison the branch history to exploit ITS.
Realigning the indirect branches and RETs mitigates this attack
vector.
- User/kernel:
With eIBRS enabled user/kernel isolation is *not* impacted by ITS.
- Indirect Branch Prediction Barrier (IBPB):
Due to this bug indirect branches may be predicted with targets
corresponding to direct branches which were executed prior to IBPB.
This will be fixed in the microcode.
Mitigation:
As indirect branches in the first half of cacheline are affected, the
mitigation is to replace those indirect branches with a call to thunk that
is aligned to the second half of the cacheline.
RETs that take prediction from RSB are not affected, but they may be
affected by RSB-underflow condition. So, RETs in the first half of
cacheline are also patched to a return thunk that executes the RET aligned
to second half of cacheline"
* tag 'its-for-linus-20250509' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftest/x86/bugs: Add selftests for ITS
x86/its: FineIBT-paranoid vs ITS
x86/its: Use dynamic thunks for indirect branches
x86/ibt: Keep IBT disabled during alternative patching
mm/execmem: Unify early execmem_cache behaviour
x86/its: Align RETs in BHB clear sequence to avoid thunking
x86/its: Add support for RSB stuffing mitigation
x86/its: Add "vmexit" option to skip mitigation on some CPUs
x86/its: Enable Indirect Target Selection mitigation
x86/its: Add support for ITS-safe return thunk
x86/its: Add support for ITS-safe indirect thunk
x86/its: Enumerate Indirect Target Selection (ITS) bug
Documentation: x86/bugs/its: Add ITS documentation
* Avoid use of uninitialized memcache pointer in user_mem_abort()
* Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
* Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
* Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
* Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
* Add missing reset of smstateen CSRs
x86:
* Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid causing
problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to sanitize the
VMCB as its state is undefined after SHUTDOWN, emulating INIT is the
least awful choice).
* Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
* Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a stale
root.
* When dumping GHCB state, use KVM's snapshot instead of the raw GHCB page
to print state, so that KVM doesn't print stale/wrong information.
* When changing memory attributes (e.g. shared <=> private), add potential
hugepage ranges to the mmu_invalidate_range_{start,end} set so that KVM
doesn't create a shared/private hugepage when the the corresponding
attributes will become mixed (the attributes are commited *after* KVM
finishes the invalidation).
* Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM has at
least one active VM. Effectively BP_SPEC_REDUCE when KVM is loaded led
to very measurable performance regressions for non-KVM workloads.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmgfbqAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNAywf+J9Ux+RccM8K2my3REQn7Z6WwMevX
CYgvdYBGt79AG8mjMKMfISzRDo3PrTi9wr+mEHfCpJ1F7CZTec/qdGY61tIjOhnE
86A5EoJcaoWhZcl4ubtQwRc//ENapwb6qI5uy10Nt30KTqS1S38M7FcZLvTYBYBx
A1Xehcnc8NOsOvXMyHvnsAi/X+yvj/wUfzETfzt5CFg8s9MHnmEFWlP+oOgNggbR
TKJVIvD0CTQR8lmdEcJYDrgWfhUsRq8qZyPAO37SoAn1tWfYAcpUUHEH2t2C6waW
shqmRx0HLshhbIWgySU2AdRx6Q3iyMIPSmTvzUhATEhEzM/IDk/DZstOyQ==
=aJFD
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing
interrupts to be taken while TGE=0 and fixing an ugly bug on
AmpereOne that occurs when taking an interrupt while clearing the
xMO bits (AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized
by KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
RISC-V:
- Add missing reset of smstateen CSRs
x86:
- Forcibly leave SMM on SHUTDOWN interception on AMD CPUs to avoid
causing problems due to KVM stuffing INIT on SHUTDOWN (KVM needs to
sanitize the VMCB as its state is undefined after SHUTDOWN,
emulating INIT is the least awful choice).
- Track the valid sync/dirty fields in kvm_run as a u64 to ensure KVM
KVM doesn't goof a sanity check in the future.
- Free obsolete roots when (re)loading the MMU to fix a bug where
pre-faulting memory can get stuck due to always encountering a
stale root.
- When dumping GHCB state, use KVM's snapshot instead of the raw GHCB
page to print state, so that KVM doesn't print stale/wrong
information.
- When changing memory attributes (e.g. shared <=> private), add
potential hugepage ranges to the mmu_invalidate_range_{start,end}
set so that KVM doesn't create a shared/private hugepage when the
the corresponding attributes will become mixed (the attributes are
commited *after* KVM finishes the invalidation).
- Rework the SRSO mitigation to enable BP_SPEC_REDUCE only when KVM
has at least one active VM. Effectively BP_SPEC_REDUCE when KVM is
loaded led to very measurable performance regressions for non-KVM
workloads"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Set/clear SRSO's BP_SPEC_REDUCE on 0 <=> 1 VM count transitions
KVM: arm64: Fix memory check in host_stage2_set_owner_locked()
KVM: arm64: Kill HCRX_HOST_FLAGS
KVM: arm64: Properly save/restore HCRX_EL2
KVM: arm64: selftest: Don't try to disable AArch64 support
KVM: arm64: Prevent userspace from disabling AArch64 support at any virtualisable EL
KVM: arm64: Force HCR_EL2.xMO to 1 at all times in VHE mode
KVM: arm64: Fix uninitialized memcache pointer in user_mem_abort()
KVM: x86/mmu: Prevent installing hugepages when mem attributes are changing
KVM: SVM: Update dump_ghcb() to use the GHCB snapshot fields
KVM: RISC-V: reset smstateen CSRs
KVM: x86/mmu: Check and free obsolete roots in kvm_mmu_reload()
KVM: x86: Check that the high 32bits are clear in kvm_arch_vcpu_ioctl_run()
KVM: SVM: Forcibly leave SMM mode on SHUTDOWN interception
or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaB/D0AAKCRDdBJ7gKXxA
jk1lAPwNV14Sra7MJpVsLGip2BaJLgG+9vQ/Fg3pntEhwX4u0gD/fXEzTog/A73O
xD7jQQStJYxHwu0K8CXIDUniZAXSSQw=
=US5c
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"22 hotfixes. 13 are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
About half are for MM. Five OCFS2 fixes and a few MAINTAINERS updates"
* tag 'mm-hotfixes-stable-2025-05-10-14-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits)
mm: fix folio_pte_batch() on XEN PV
nilfs2: fix deadlock warnings caused by lock dependency in init_nilfs()
mm/hugetlb: copy the CMA flag when demoting
mm, swap: fix false warning for large allocation with !THP_SWAP
selftests/mm: fix a build failure on powerpc
selftests/mm: fix build break when compiling pkey_util.c
mm: vmalloc: support more granular vrealloc() sizing
tools/testing/selftests: fix guard region test tmpfs assumption
ocfs2: stop quota recovery before disabling quotas
ocfs2: implement handshaking with ocfs2 recovery thread
ocfs2: switch osb->disable_recovery to enum
mailmap: map Uwe's BayLibre addresses to a single one
MAINTAINERS: add mm THP section
mm/userfaultfd: fix uninitialized output field for -EAGAIN race
selftests/mm: compaction_test: support platform with huge mount of memory
MAINTAINERS: add core mm section
ocfs2: fix panic in failed foilio allocation
mm/huge_memory: fix dereferencing invalid pmd migration entry
MAINTAINERS: add reverse mapping section
x86: disable image size check for test builds
...
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaBsNHBccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFkk9AP9JSol3oXKv4Z8LX0/r3kqGGCbM
tpqYKtF+S3MyuftQZgD/Z61FKI90MqUbn4sWJWzvOOuTOUk9jJ2Ki9h4kb0aGgQ=
=p25s
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.15-3' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.15, round #3
- Avoid use of uninitialized memcache pointer in user_mem_abort()
- Always set HCR_EL2.xMO bits when running in VHE, allowing interrupts
to be taken while TGE=0 and fixing an ugly bug on AmpereOne that
occurs when taking an interrupt while clearing the xMO bits
(AC03_CPU_36)
- Prevent VMMs from hiding support for AArch64 at any EL virtualized by
KVM
- Save/restore the host value for HCRX_EL2 instead of restoring an
incorrect fixed value
- Make host_stage2_set_owner_locked() check that the entire requested
range is memory rather than just the first page
netdev_bind_rx takes ownership of the queue array passed as parameter
and frees it, so a queue array buffer cannot be reused across multiple
netdev_bind_rx calls.
This commit fixes that by always passing in a newly created queue array
to all netdev_bind_rx calls in ncdevmem.
Fixes: 85585b4bc8 ("selftests: add ncdevmem, netcat for devmem TCP")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250508084434.1933069-1-cratiu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Below are the tests added for Indirect Target Selection (ITS):
- its_sysfs.py - Check if sysfs reflects the correct mitigation status for
the mitigation selected via the kernel cmdline.
- its_permutations.py - tests mitigation selection with cmdline
permutations with other bugs like spectre_v2 and retbleed.
- its_indirect_alignment.py - verifies that for addresses in
.retpoline_sites section that belong to lower half of cacheline are
patched to ITS-safe thunk. Typical output looks like below:
Site 49: function symbol: __x64_sys_restart_syscall+0x1f <0xffffffffbb1509af>
# vmlinux: 0xffffffff813509af: jmp 0xffffffff81f5a8e0
# kcore: 0xffffffffbb1509af: jmpq *%rax
# ITS thunk NOT expected for site 49
# PASSED: Found *%rax
#
Site 50: function symbol: __resched_curr+0xb0 <0xffffffffbb181910>
# vmlinux: 0xffffffff81381910: jmp 0xffffffff81f5a8e0
# kcore: 0xffffffffbb181910: jmp 0xffffffffc02000fc
# ITS thunk expected for site 50
# PASSED: Found 0xffffffffc02000fc -> jmpq *%rax <scattered-thunk?>
- its_ret_alignment.py - verifies that for addresses in .return_sites
section that belong to lower half of cacheline are patched to
its_return_thunk. Typical output looks like below:
Site 97: function symbol: collect_event+0x48 <0xffffffffbb007f18>
# vmlinux: 0xffffffff81207f18: jmp 0xffffffff81f5b500
# kcore: 0xffffffffbb007f18: jmp 0xffffffffbbd5b560
# PASSED: Found jmp 0xffffffffbbd5b560 <its_return_thunk>
#
Site 98: function symbol: collect_event+0xa4 <0xffffffffbb007f74>
# vmlinux: 0xffffffff81207f74: jmp 0xffffffff81f5b500
# kcore: 0xffffffffbb007f74: retq
# PASSED: Found retq
Some of these tests have dependency on tools like virtme-ng[1] and drgn[2].
When the dependencies are not met, the test will be skipped.
[1] https://github.com/arighi/virtme-ng
[2] https://github.com/osandov/drgn
Co-developed-by: Tao Zhang <tao1.zhang@linux.intel.com>
Signed-off-by: Tao Zhang <tao1.zhang@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Adding link info test for ref_ctr_offset retrieval for both
uprobe and uretprobe probes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/bpf/20250509153539.779599-3-jolsa@kernel.org
TRACE_syscall.ptrace.negative_ENOSYS and TRACE_syscall.seccomp.negative_ENOSYS
on arm32 are being reported as failures instead of skipping.
The teardown_trace_fixture function sets the test to KSFT_FAIL in case of a
non 0 return value from the tracer process.
Due to _metadata now being shared between the forked processes the tracer is
returning the KSFT_SKIP value set by the tracee which is non 0.
Remove the setting of the _metadata.exit_code in teardown_trace_fixture.
Fixes: 24cf65a622 ("selftests/harness: Share _metadata between forked processes")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Link: https://lore.kernel.org/r/20250509115622.64775-1-terry.tritton@linaro.org
Signed-off-by: Kees Cook <kees@kernel.org>
tclock_gettime() is a wrapper around clock_gettime().
The first parameter of clock_gettime() is of type "clockid_t",
not "clock_t".
Use the correct type instead.
Link: https://lore.kernel.org/r/20250502-selftests-timens-fixes-v1-3-fb517c76f04d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These functions are never used outside their defining compilation unit and
can be made static.
Link: https://lore.kernel.org/r/20250502-selftests-timens-fixes-v1-2-fb517c76f04d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The TAP specification requires that the output begins with a header line.
These headers lines are missing in the timens tests.
Print such a line.
Link: https://lore.kernel.org/r/20250502-selftests-timens-fixes-v1-1-fb517c76f04d@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Commit 0b631ed3ce ("kselftest: cpufreq: Add RTC wakeup alarm") added
support for automatic wakeup in the suspend routine of the cpufreq
kselftest by using rtcwake, however it left the manual power state
change in the common path. The end result is that when running the
cpufreq kselftest with '-t suspend_rtc' or '-t hibernate_rtc', the
system will go to sleep and be woken up by the RTC, but then immediately
go to sleep again with no wakeup programmed, so it will sleep forever in
an automated testing setup.
Fix this by moving the manual power state change so that it only happens
when not using rtcwake.
Link: https://lore.kernel.org/r/20250430-ksft-cpufreq-suspend-rtc-double-fix-v1-1-dc17a729c5a7@collabora.com
Fixes: 0b631ed3ce ("kselftest: cpufreq: Add RTC wakeup alarm")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In cpufreq basic selftests, one of the testcases is to read all cpufreq
sysfs files and print the values. This testcase assumes all the cpufreq
sysfs files have read permissions. However certain cpufreq sysfs files
(eg. stats/reset) are write only files and this testcase errors out
when it is not able to read the file.
Similarily, there is one more testcase which reads the cpufreq sysfs
file data and write it back to same file. This testcase also errors out
for sysfs files without read permission.
Fix these testcases by adding proper read permission checks.
Link: https://lore.kernel.org/r/20250430171433.10866-1-swapnil.sapkal@amd.com
Reported-by: Narasimhan V <narasimhan.v@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Poll program is a helper to ftracetest, thus make it a
generic file and remove it from being run as a test.
Currently when executing tests using
$ make run_tests
CC poll
TAP version 13
1..2
# timeout set to 0
# selftests: ftrace: poll
# Error: Polling file is not specified
not ok 1 selftests: ftrace: poll # exit=255
Fix this by using TEST_GEN_FILES to build the 'poll' binary as a helper
rather than as a test.
Fixes: 80c3e28528 ("selftests/tracing: Add hist poll() support test")
Link: https://lore.kernel.org/r/20250409044632.363285-1-Ayush.jain3@amd.com
Signed-off-by: Ayush Jain <Ayush.jain3@amd.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently, __xlated_unpriv and __jited_unpriv do not work because the
BPF syscall will overwrite info.jited_prog_len and info.xlated_prog_len
with 0 if the process is not bpf_capable(). This bug was not noticed
before, because there is no test that actually uses
__xlated_unpriv/__jited_unpriv.
To resolve this, simply restore the capabilities earlier (but still
after loading the program). Adding this here unconditionally is fine
because the function first checks that the capabilities were initialized
before attempting to restore them.
This will be important later when we add tests that check whether a
speculation barrier was inserted in the correct location.
Signed-off-by: Luis Gerhorst <luis.gerhorst@fau.de>
Fixes: 9c9f733913 ("selftests/bpf: allow checking xlated programs in verifier_* tests")
Fixes: 7d743e4c75 ("selftests/bpf: __jited test tag to check disassembly after jit")
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250501073603.1402960-2-luis.gerhorst@fau.de
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For riscv64, enable all BPF_{LOAD_ACQ,STORE_REL} selftests except the
arena_atomics/* ones (not guarded behind CAN_USE_LOAD_ACQ_STORE_REL),
since arena access is not yet supported.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/9d878fa99a72626208a8eed3c04c4140caf77fda.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify that 8-, 16- and 32-bit load-acquires are zero-extending by using
immediate values with their highest bit set. Do the same for the 64-bit
variant to keep the style consistent.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/11097fd515f10308b3941469ee4c86cb8872db3f.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, we pass 0x1234567890abcdef to __retval() for the following
two tests:
verifier_load_acquire/load_acquire_64
verifier_store_release/store_release_64
However, the upper 32 bits of that value are being ignored, since
__retval() expects an int. Actually, the tests would still pass even if
I change '__retval(0x1234567890abcdef)' to e.g. '__retval(0x90abcdef)'.
Restructure the tests a bit to test the entire 64-bit values properly.
Do the same to their 8-, 16- and 32-bit variants as well to keep the
style consistent.
Fixes: ff3afe5da9 ("selftests/bpf: Add selftests for load-acquire and store-release instructions")
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/d67f4c6f6ee0d0388cbce1f4892ec4176ee2d604.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Instead of open-coding the conditions, use
'#ifdef CAN_USE_LOAD_ACQ_STORE_REL' to guard the following tests:
verifier_precision/bpf_load_acquire
verifier_precision/bpf_store_release
verifier_store_release/*
Note that, for the first two tests in verifier_precision.c, switching to
'#ifdef CAN_USE_LOAD_ACQ_STORE_REL' means also checking if
'__clang_major__ >= 18', which has already been guaranteed by the outer
'#if' check.
Acked-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Pu Lehui <pulehui@huawei.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com> # QEMU/RVA23
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/45d7e025f6e390a8ff36f08fc51e31705ac896bd.1746588351.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Added new test cases for FQ, FQ_CODEL, FQ_PIE, and HHF qdiscs to verify queue
trimming behavior when the qdisc limit is dynamically reduced.
Each test injects packets, reduces the qdisc limit, and checks that the new
limit is enforced. This is still best effort since timing qdisc backlog
is not easy.
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Revert fbbf93556f ("selftests: nic_performance: Add selftest for performance of NIC driver")
Revert c087dc5439 ("selftests: nic_link_layer: Add selftest case for speed and duplex states")
Revert 6116075e18 ("selftests: nic_link_layer: Add link layer selftest for NIC driver")
These tests don't clean up after themselves, don't use the disruptive
annotations, don't get included in make install etc. etc. The tests
were added before we have any "HW" runner, so the issues were missed.
Our CI doesn't have any way of excluding broken tests, remove these
for now to stop the random pollution of results due to broken env.
We can always add them back once / if fixed.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250507140109.929801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub reports test failures on debug kernel:
FAIL: proc inconsistency after uniq filter for ...
This is because entries are expiring while validation is happening.
Increase the timeout of ctnetlink injected entries and the
icmp (ping) timeout to 1h to avoid this.
To reduce run-time, add less entries via ctnetlink when KSFT_MACHINE_SLOW
is set.
also log of a failed run had:
PASS: dump in netns had same entry count (-C 0, -L 0, -p 0, /proc 0)
... i.e. all entries already expired: add a check and set failure if
this happens.
While at it, include a diff when there were duplicate entries and add
netns name to error messages (it tells if icmp or ctnetlink failed).
Fixes: d33f889fd8 ("selftests: netfilter: add conntrack stress test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20250506061125.1a244d12@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20250507075000.5819-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have still a comple of regressions open due to the recent
drivers locking refactor. The patches are in-flight, but not
ready yet.
Current release - regressions:
- core: lock netdevices during dev_shutdown
- sch_htb: make htb_deactivate() idempotent
- eth: virtio-net: don't re-enable refill work too early
Current release - new code bugs:
- eth: icssg-prueth: fix kernel panic during concurrent Tx queue access
Previous releases - regressions:
- gre: fix again IPv6 link-local address generation.
- eth: b53: fix learning on VLAN unaware bridges
Previous releases - always broken:
- wifi: fix out-of-bounds access during multi-link element defragmentation
- can:
- initialize spin lock on device probe
- fix order of unregistration calls
- openvswitch: fix unsafe attribute parsing in output_userspace()
- eth: virtio-net: fix total qstat values
- eth: mtk_eth_soc: reset all TX queues on DMA free
- eth: fbnic: firmware IPC mailbox fixes
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=8E6K
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN, WiFi and netfilter.
We have still a comple of regressions open due to the recent
drivers locking refactor. The patches are in-flight, but not
ready yet.
Current release - regressions:
- core: lock netdevices during dev_shutdown
- sch_htb: make htb_deactivate() idempotent
- eth: virtio-net: don't re-enable refill work too early
Current release - new code bugs:
- eth: icssg-prueth: fix kernel panic during concurrent Tx queue
access
Previous releases - regressions:
- gre: fix again IPv6 link-local address generation.
- eth: b53: fix learning on VLAN unaware bridges
Previous releases - always broken:
- wifi: fix out-of-bounds access during multi-link element
defragmentation
- can:
- initialize spin lock on device probe
- fix order of unregistration calls
- openvswitch: fix unsafe attribute parsing in output_userspace()
- eth:
- virtio-net: fix total qstat values
- mtk_eth_soc: reset all TX queues on DMA free
- fbnic: firmware IPC mailbox fixes"
* tag 'net-6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
virtio-net: fix total qstat values
net: export a helper for adding up queue stats
fbnic: Do not allow mailbox to toggle to ready outside fbnic_mbx_poll_tx_ready
fbnic: Pull fbnic_fw_xmit_cap_msg use out of interrupt context
fbnic: Improve responsiveness of fbnic_mbx_poll_tx_ready
fbnic: Cleanup handling of completions
fbnic: Actually flush_tx instead of stalling out
fbnic: Add additional handling of IRQs
fbnic: Gate AXI read/write enabling on FW mailbox
fbnic: Fix initialization of mailbox descriptor rings
net: dsa: b53: do not set learning and unicast/multicast on up
net: dsa: b53: fix learning on VLAN unaware bridges
net: dsa: b53: fix toggling vlan_filtering
net: dsa: b53: do not program vlans when vlan filtering is off
net: dsa: b53: do not allow to configure VLAN 0
net: dsa: b53: always rejoin default untagged VLAN on bridge leave
net: dsa: b53: fix VLAN ID for untagged vlan on bridge leave
net: dsa: b53: fix flushing old pvid VLAN on pvid change
net: dsa: b53: fix clearing PVID of a port
net: dsa: b53: keep CPU port always tagged again
...
In order to fix an ABI problem, we recently changed the way that reads
of the NT_ARM_SVE and NT_ARM_SSVE regsets behave when their
corresponding vector state is inactive.
Update the fp-ptrace test for the new behaviour.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Spickett <david.spickett@arm.com>
Cc: Luis Machado <luis.machado@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250508132644.1395904-25-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In order to fix an ABI problem, we recently changed the way that
changing the SVE/SME vector length affects PSTATE.SM. Historically,
changing the SME vector length would clear PSTATE.SM. Now, changing the
SME vector length preserves PSTATE.SM.
Update the fp-ptrace test for the new behaviour.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Spickett <david.spickett@arm.com>
Cc: Luis Machado <luis.machado@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250508132644.1395904-24-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
In order to fix an ABI problem, we recently changed the way that a
clone() syscall manipulates TPIDR2 and PSTATE.ZA. Historically the child
would inherit the parent's TPIDR2 value unless CLONE_SETTLS was set, and
now the child will inherit the parent's TPIDR2 value unless CLONE_VM is
set.
Update the tpidr2 test for the new behaviour.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Richard Sandiford <richard.sandiford@arm.com>
Cc: Sander De Smalen <sander.desmalen@arm.com>
Cc: Tamas Petz <tamas.petz@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yury Khrustalev <yury.khrustalev@arm.com>
Link: https://lore.kernel.org/r/20250508132644.1395904-23-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
The fp-ptrace test suite expects that FPMR is set to zero when PSTATE.SM
is changed via ptrace, but ptrace has never altered FPMR in this way,
and the test logic erroneously relies upon (and has concealed) a bug
where task_fpsimd_load() would unexpectedly and non-deterministically
clobber FPMR.
Using ptrace, FPMR can only be altered by writing to the NT_ARM_FPMR
regset. The value of PSTATE.SM can be altered by writing to the
NT_ARM_SVE or NT_ARM_SSVE regsets, and/or by changing the SME vector
length (when writing to the NT_ARM_SVE, NT_ARM_SSVE, or NT_ARM_ZA
regsets), but none of these writes will change the value of FPMR.
The task_fpsimd_load() bug was introduced with the initial FPMR support
in commit:
203f2b95a8 ("arm64/fpsimd: Support FEAT_FPMR")
The incorrect FPMR test code was introduced in commit:
7dbd26d0b2 ("kselftest/arm64: Add FPMR coverage to fp-ptrace")
Subsequently, the task_fpsimd_load() bug was fixed in commit:
e5fa85fce0 ("arm64/fpsimd: Don't corrupt FPMR when streaming mode changes")
... whereupon the fp-ptrace FPMR tests started failing reliably, e.g.
| # # Mismatch in saved FPMR: 915058000 != 0
| # not ok 25 SVE write, SVE 64->64, SME 64/0->64/1
Fix this by changing the test to expect that FPMR is *NOT* changed when
PSTATE.SM is changed via ptrace, matching the extant behaviour.
I've chosen to update the test code rather than modifying ptrace to zero
FPMR when PSTATE.SM changes. Not zeroing FPMR is simpler overall, and
allows the NT_ARM_FPMR regset to be handled independently from other
regsets, leaving less scope for error.
Fixes: 7dbd26d0b2 ("kselftest/arm64: Add FPMR coverage to fp-ptrace")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Spickett <david.spickett@arm.com>
Cc: Luis Machado <luis.machado@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20250508132644.1395904-22-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a test to verify KVM's fastops emulation via forced emulation. KVM's
so called "fastop" infrastructure executes the to-be-emulated instruction
directly on hardware instead of manually emulating the instruction in
software, using various shenanigans to glue together the emulator context
and CPU state, e.g. to get RFLAGS fed into the instruction and back out
for the emulator.
Add testcases for all instructions that are low hanging fruit. While the
primary goal of the selftest is to validate the glue code, a secondary
goal is to ensure "emulation" matches hardware exactly, including for
arithmetic flags that are architecturally undefined. While arithmetic
flags may be *architecturally* undefined, their behavior is deterministic
for a given CPU (likely a given uarch, and possibly even an entire family
or class of CPUs). I.e. KVM has effectively been emulating underlying
hardware behavior for years.
Link: https://lore.kernel.org/r/20250506011250.1089254-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
The compiler is unaware of the size of code generated by the ".rept"
assembler directive. This results in the compiler emitting branch
instructions where the offset to branch to exceeds the maximum allowed
value, resulting in build failures like the following:
CC protection_keys
/tmp/ccypKWAE.s: Assembler messages:
/tmp/ccypKWAE.s:2073: Error: operand out of range (0x0000000000020158
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
/tmp/ccypKWAE.s:2509: Error: operand out of range (0x0000000000020130
is not between 0xffffffffffff8000 and 0x0000000000007ffc)
Fix the issue by manually adding nop instructions using the preprocessor.
Link: https://lkml.kernel.org/r/20250428131937.641989-2-nysal@linux.ibm.com
Fixes: 46036188ea ("selftests/mm: build with -O2")
Reported-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 50910acd6f ("selftests/mm: use sys_pkey helpers consistently")
added a pkey_util.c to refactor some of the protection_keys functions
accessible by other tests. But this broken the build in powerpc in two
ways,
pkey-powerpc.h: In function `arch_is_powervm':
pkey-powerpc.h:73:21: error: storage size of `buf' isn't known
73 | struct stat buf;
| ^~~
pkey-powerpc.h:75:14: error: implicit declaration of function `stat'; did you mean `strcat'? [-Wimplicit-function-declaration]
75 | if ((stat("/sys/firmware/devicetree/base/ibm,partition-name", &buf) == 0) &&
| ^~~~
| strcat
Since pkey_util.c includes pkeys-helper.h, which in turn includes pkeys-powerpc.h,
stat.h including is missing for "struct stat". This is fixed by adding "sys/stat.h"
in pkeys-powerpc.h
Secondly,
pkey-powerpc.h:55:18: warning: format `%llx' expects argument of type `long long unsigned int', but argument 3 has type `u64' {aka `long unsigned int'} [-Wformat=]
55 | dprintf4("%s() changing %016llx to %016llx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
56 | __func__, __read_pkey_reg(), pkey_reg);
| ~~~~~~~~~~~~~~~~~
| |
| u64 {aka long unsigned int}
pkey-helpers.h:63:32: note: in definition of macro `dprintf_level'
63 | sigsafe_printf(args); \
| ^~~~
These format specifier related warning are removed by adding
"__SANE_USERSPACE_TYPES__" to pkeys_utils.c.
Link: https://lkml.kernel.org/r/20250428131937.641989-1-nysal@linux.ibm.com
Fixes: 50910acd6f ("selftests/mm: use sys_pkey helpers consistently")
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current implementation of the guard region tests assume that /tmp is
mounted as tmpfs, that is shmem.
This isn't always the case, and at least one instance of a spurious test
failure has been reported as a result.
This assumption is unsafe, rushed and silly - and easily remedied by
simply using memfd, so do so.
We also have to fixup the readonly_file test to explicitly only be
applicable to file-backed cases.
Link: https://lkml.kernel.org/r/20250425162436.564002-1-lorenzo.stoakes@oracle.com
Fixes: 272f37d3e9 ("tools/selftests: expand all guard region tests to file-backed")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-mm/a2d2766b-0ab4-437b-951a-8595a7506fe9@arm.com/
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running mm selftest to verify mm patches, 'compaction_test' case
failed on an x86 server with 1TB memory. And the root cause is that it
has too much free memory than what the test supports.
The test case tries to allocate 100000 huge pages, which is about 200 GB
for that x86 server, and when it succeeds, it expects it's large than 1/3
of 80% of the free memory in system. This logic only works for platform
with 750 GB ( 200 / (1/3) / 80% ) or less free memory, and may raise false
alarm for others.
Fix it by changing the fixed page number to self-adjustable number
according to the real number of free memory.
Link: https://lkml.kernel.org/r/20250423103645.2758-1-feng.tang@linux.alibaba.com
Fixes: bd67d5c15c ("Test compaction of mlocked memory")
Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com>
Acked-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@inux.alibaba.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sri Jayaramappa <sjayaram@akamai.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fix ethtool syntax for setting ntuple rule into rss. It should be
`context' instead of `action'.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503043007.857215-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add MODULE_DESCRIPTION() to address the following warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in test/cxl_test.o
WARNING: modpost: missing MODULE_DESCRIPTION() in test/cxl_mock.o
WARNING: modpost: missing MODULE_DESCRIPTION() in test/cxl_mock_mem.o
[dj: s/CXL test/cxl_test:/ per djbw's comment]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250429235953.4175408-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This patch adds the "list_peek" test to use the new
bpf_list_{front,back} kfunc.
The test_{front,back}* tests ensure that the return value
is a non_own_ref node pointer and requires the spinlock to be held.
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> # check non_own_ref marking
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-9-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch has a much simplified rbtree usage from the
kernel sch_fq qdisc. It has a "struct node_data" which can be
added to two different rbtrees which are ordered by different keys.
The test first populates both rbtrees. Then search for a lookup_key
from the "groot0" rbtree. Once the lookup_key is found, that node
refcount is taken. The node is then removed from another "groot1"
rbtree.
While searching the lookup_key, the test will also try to remove
all rbnodes in the path leading to the lookup_key.
The test_{root,left,right}_spinlock_true tests ensure that the
return value of the bpf_rbtree functions is a non_own_ref node pointer.
This is done by forcing an verifier error by calling a helper
bpf_jiffies64() while holding the spinlock. The tests then
check for the verifier message
"call bpf_rbtree...R0=rcu_ptr_or_null_node..."
The other test_{root,left,right}_spinlock_false tests ensure that
they must be called with spinlock held.
Suggested-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> # Check non_own_ref marking
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-6-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_rbtree_{remove,left,right} requires the root's lock to be held.
They also check the node_internal->owner is still owned by that root
before proceeding, so it is safe to allow refcounted bpf_rb_node
pointer to be used in these kfuncs.
In a bpf fq implementation which is much closer to the kernel fq,
https://lore.kernel.org/bpf/20250418224652.105998-13-martin.lau@linux.dev/,
a networking flow (allocated by bpf_obj_new) can be added to two different
rbtrees. There are cases that the flow is searched from one rbtree,
held the refcount of the flow, and then removed from another rbtree:
struct fq_flow {
struct bpf_rb_node fq_node;
struct bpf_rb_node rate_node;
struct bpf_refcount refcount;
unsigned long sk_long;
};
int bpf_fq_enqueue(...)
{
/* ... */
bpf_spin_lock(&root->lock);
while (can_loop) {
/* ... */
if (!p)
break;
gc_f = bpf_rb_entry(p, struct fq_flow, fq_node);
if (gc_f->sk_long == sk_long) {
f = bpf_refcount_acquire(gc_f);
break;
}
/* ... */
}
bpf_spin_unlock(&root->lock);
if (f) {
bpf_spin_lock(&q->lock);
bpf_rbtree_remove(&q->delayed, &f->rate_node);
bpf_spin_unlock(&q->lock);
}
}
bpf_rbtree_{left,right} do not need this change but are relaxed together
with bpf_rbtree_remove instead of adding extra verifier logic
to exclude these kfuncs.
To avoid bi-sect failure, this patch also changes the selftests together.
The "rbtree_api_remove_unadded_node" is not expecting verifier's error.
The test now expects bpf_rbtree_remove(&groot, &m->node) to return NULL.
The test uses __retval(0) to ensure this NULL return value.
Some of the "only take non-owning..." failure messages are changed also.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250506015857.817950-5-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
-----BEGIN PGP SIGNATURE-----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=TxSF
-----END PGP SIGNATURE-----
Merge tag 'nf-next-25-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next:
1) Apparently, nf_conntrack_bridge changes the way in which fragments
are handled, dealing to packet drop. From Huajian Yang.
2) Add a selftest to stress the conntrack subsystem, from Florian Westphal.
3) nft_quota depletion is off-by-one byte, Zhongqiu Duan.
4) Rewrites the procfs to read the conntrack table to speed it up,
from Florian Westphal.
5) Two patches to prevent overflow in nft_pipapo lookup table and to
clamp the maximum bucket size.
6) Update nft_fib selftest to check for loopback packet bypass.
From Florian Westphal.
netfilter pull request 25-05-06
* tag 'nf-next-25-05-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
selftests: netfilter: nft_fib.sh: check lo packets bypass fib lookup
netfilter: nft_set_pipapo: clamp maximum map bucket size to INT_MAX
netfilter: nft_set_pipapo: prevent overflow in lookup table allocation
netfilter: nf_conntrack: speed up reads from nf_conntrack proc file
netfilter: nft_quota: match correctly when the quota just depleted
selftests: netfilter: add conntrack stress test
netfilter: bridge: Move specific fragmented packet to slow_path instead of dropping it
====================
Link: https://patch.msgid.link/20250505234151.228057-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ksft runner sends 2 SIGTERMs in a row if a test runs out of time.
Handle this in a similar way we handle SIGINT - cleanup and stop
running further tests.
Because we get 2 signals we need a bit of logic to ignore
the subsequent one, they come immediately one after the other
(due to commit 9616cb34b0 ("kselftest/runner.sh: Propagate SIGTERM
to runner child")).
This change makes sure we run cleanup (scheduled defer()s)
and also print a stack trace on SIGTERM, which doesn't happen
by default. Tests occasionally hang in NIPA and it's impossible
to tell what they are waiting from or doing.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250503011856.46308-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Until recently, the kernel could unexpectedly discard SVE state for a
period after a KVM_RUN ioctl, when the guest did not execute any
FPSIMD/SVE/SME instructions. We fixed that issue in commit:
fbc7e61195 ("KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state")
Add a test which tries to provoke that issue by manipulating SVE state
before/after running a guest which does not execute any FPSIMD/SVE/SME
instructions. The test executes a handful of iterations to miminize
the risk that the issue is masked by preemption.
Signed-off--by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20250417-kvm-selftest-sve-signal-v1-1-6330c2f3da0c@kernel.org
[maz: Restored MR's SoB, fixed commit message according to MR's write-up]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently, the test result does not differentiate between the cases when
either one of the address families are configured or if both the address
families are configured. Ideally, the result should report if a
particular case was skipped.
./drivers/net/ping.py
TAP version 13
1..7
ok 1 ping.test_default_v4 # SKIP Test requires IPv4 connectivity
ok 2 ping.test_default_v6
ok 3 ping.test_xdp_generic_sb
ok 4 ping.test_xdp_generic_mb
ok 5 ping.test_xdp_native_sb
ok 6 ping.test_xdp_native_mb
ok 7 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:2 error:0
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503013518.1722913-4-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On a system with either of the ipv4 or ipv6 information missing, tests
are currently skipped. Ideally, the test should run as long as at least
one address family is present. This patch make test run whenever
possible.
Before:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default
ok 2 ping.test_xdp_generic_sb
ok 3 ping.test_xdp_generic_mb
ok 4 ping.test_xdp_native_sb
ok 5 ping.test_xdp_native_mb
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:5 fail:0 xfail:0 xpass:0 skip:1 error:0
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250503013518.1722913-3-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The `get_interface_info` call has ip version hard-coded which leads to
failures on an IPV6 system. The NetDrvEnv class already gathers
information about remote interface, so instead of fixing the local
implementation switch to using cfg.remote_ifname.
Before:
./drivers/net/ping.py
Traceback (most recent call last):
File "/new_tests/./drivers/net/ping.py", line 217, in <module>
main()
File "/new_tests/./drivers/net/ping.py", line 204, in main
get_interface_info(cfg)
File "/new_tests/./drivers/net/ping.py", line 128, in get_interface_info
raise KsftFailEx('Can not get remote interface')
net.lib.py.ksft.KsftFailEx: Can not get remote interface
After:
./drivers/net/ping.py
TAP version 13
1..6
ok 1 ping.test_default # SKIP Test requires IPv4 connectivity
ok 2 ping.test_xdp_generic_sb # SKIP Test requires IPv4 connectivity
ok 3 ping.test_xdp_generic_mb # SKIP Test requires IPv4 connectivity
ok 4 ping.test_xdp_native_sb # SKIP Test requires IPv4 connectivity
ok 5 ping.test_xdp_native_mb # SKIP Test requires IPv4 connectivity
ok 6 ping.test_xdp_offload # SKIP device does not support offloaded XDP
Totals: pass:0 fail:0 xfail:0 xpass:0 skip:6 error:0
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250503013518.1722913-2-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GRE devices have their special code for IPv6 link-local address
generation that has been the source of several regressions in the past.
Add selftest to check that all gre, ip6gre, gretap and ip6gretap get an
IPv6 link-link local address in accordance with the
net.ipv6.conf.<dev>.addr_gen_mode sysctl.
Note: This patch was originally applied as commit 6f50175cca ("selftests:
Add IPv6 link-local address generation tests for GRE devices.").
However, it was then reverted by commit 355d940f4d ("Revert "selftests:
Add IPv6 link-local address generation tests for GRE devices."")
because the commit it depended on was going to be reverted. Now that
the situation is resolved, we can add this selftest again (no changes
since original patch, appart from context update in
tools/testing/selftests/net/Makefile).
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/2c3a5733cb3a6e3119504361a9b9f89fda570a2d.1746225214.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clean up two build warnings:
[1]
iou-zcrx.c: In function ‘process_recvzc’:
iou-zcrx.c:263:37: warning: too many arguments for format [-Wformat-extra-args]
263 | error(1, 0, "payload mismatch at ", i);
| ^~~~~~~~~~~~~~~~~~~~~~
[2] Use "%zd" for ssize_t type as better
iou-zcrx.c: In function ‘run_client’:
iou-zcrx.c:357:47: warning: format ‘%d’ expects argument of type ‘int’, but argument 4 has type ‘ssize_t’ {aka ‘long int’} [-Wformat=]
357 | error(1, 0, "send(): %d", sent);
| ~^ ~~~~
| | |
| int ssize_t {aka long int}
| %ld
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250502175136.1122-1-haiyuewa@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch aims to add chk_dump_subflow in diag.sh. The subflow's
info can be obtained through "ss -tin", then use the 'mptcp_diag'
to verify the token in subflow_info.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/524
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-7-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds 'get_subflow_info' in 'mptcp_diag', which can check whether
a TCP connection is an MPTCP subflow based on the "INET_ULP_INFO_MPTCP"
with tcp_diag method.
The helper 'print_subflow_info' in 'mptcp_diag' can print the subflow_filed
of an MPTCP subflow for further checking the 'subflow_info' through
inet_diag method.
The example of the whole output should be:
$ ./mptcp_diag -s "127.0.0.1:10000 127.0.0.1:38984"
127.0.0.1:10000 -> 127.0.0.1:38984
It's a mptcp subflow, the subflow info:
flags:Mec token:0000(id:0)/4278e77e(id:0) seq:9288466187236176036 \
sfseq:1 ssnoff:2317083055 maplen:215
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-6-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces the '__u32 proto' variable to the 'send_query' and
'recv_nlmsg' functions for further extending function.
In the 'send_query' function, the inclusion of this variable makes the
structure clearer and more readable.
In the 'recv_nlmsg' function, the '__u32 proto' variable ensures that
the 'diag_info' field remains unmodified when processing IPPROTO_TCP data,
thereby preventing unintended transformation into 'mptcp_info' format.
While at it, increment iovlen directly when an item is added to simplify
this portion of the code and improve its readaility.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-5-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch use 'inet_diag_req_v2' instead of 'token' as parameters of
send_query, and construct the req in 'get_mptcpinfo'.
This modification enhances the clarity of the code, and prepare for the
dump_subflow_info.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-4-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a struct named 'params' to save 'target_token' and other
future parameters. This structure facilitates future function expansions.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-3-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
getaddrinfo MPTCP is recently supported in glibc and IPPROTO_MPTCP for
getaddrinfo is used in mptcp_connect.c. But in mptcp_sockopt.c and
mptcp_inq.c, IPPROTO_TCP are still used for getaddrinfo, So this patch
updates them.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-2-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_lib_get_info_value() will only print the first entry that match
the filter because of the ';q' at the end. As a consequence, the 'sed'
command could finish before the previous 'grep' one and print a 'write
error' warning because it is trying to write data to the closed pipe.
Such warnings are not interesting, they can be hidden by muting stderr
here for grep.
While at it, clearly indicate that mptcp_lib_get_info_value() will only
print the first matched entry to avoid confusions later on.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250502-net-next-mptcp-sft-inc-cover-v1-1-68eec95898fb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Building kublk currently fails (with a "could not find linux/ublk_cmd.h"
error message) if kernel headers are not installed in a system-global
location (i.e. somewhere in the compiler's default include search path).
This failure is unnecessary, as make kselftest installs kernel headers
in the build tree - kublk's build just isn't looking for them properly.
There is an include path in kublk's CFLAGS which is probably intended to
find the kernel headers installed in the build tree; fix it so that it
can actually find them.
This introduces some macro redefinition issues between glibc-provided
headers and kernel headers; fix those by eliminating one include in
kublk.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-3-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convention dictates that tests should not log anything on success. Make
test_generic_06 follow this convention.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-2-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Compiler warnings can catch bugs at compile time; thus, heeding them is
usually a good idea. Turn warnings into errors by default for the kublk
build so that anyone making changes is forced to heed them. Compiler
warnings can also sometimes produce annoying false positives, so provide
a flag WERROR that the developer can use as follows to have the build
and selftests run go through even if there are warnings:
make WERROR=0 TARGETS=ublk kselftest
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429-ublk_selftests-v2-1-e970b6d9e4f4@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Integrate the reproducer from Alan into TC selftests and use scapy to
generate TCP traffic instead of relying on ping command.
Cc: Alan J. Wylie <alan@wylie.me.uk>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250428232955.1740419-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaBVftAAKCRAraS+Z+3y5
EzJ7AP9dtYuBHmU0tB5upuLzQ9sVxaCXs2linfRKK40A5YJDcgD/fBQqPzhxCqZR
moHEqelMLgrAUcyro5egdRJZPcaTfQE=
=6Las
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-05-02
We've added 14 non-merge commits during the last 10 day(s) which contain
a total of 13 files changed, 740 insertions(+), 121 deletions(-).
The main changes are:
1) Avoid skipping or repeating a sk when using a UDP bpf_iter,
from Jordan Rife.
2) Fixed a crash when a bpf qdisc is set in
the net.core.default_qdisc, from Amery Hung.
3) A few other fixes in the bpf qdisc, from Amery Hung.
- Always call qdisc_watchdog_init() in the .init prologue such that
the .reset/.destroy epilogue can always call qdisc_watchdog_cancel()
without issue.
- bpf_qdisc_init_prologue() was incorrectly returning an error
when the bpf qdisc is set as the default_qdisc and the mq is creating
the default_qdisc. It is now fixed.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Cleanup bpf qdisc selftests
selftests/bpf: Test attaching a bpf qdisc with incomplete operators
bpf: net_sched: Make some Qdisc_ops ops mandatory
selftests/bpf: Test setting and creating bpf qdisc as default qdisc
bpf: net_sched: Fix bpf qdisc init prologue when set as default qdisc
selftests/bpf: Add tests for bucket resume logic in UDP socket iterators
selftests/bpf: Return socket cookies from sock_iter_batch progs
bpf: udp: Avoid socket skips and repeats during iteration
bpf: udp: Use bpf_udp_iter_batch_item for bpf_udp_iter_state batch items
bpf: udp: Get rid of st_bucket_done
bpf: udp: Make sure iter->batch always contains a full bucket snapshot
bpf: udp: Make mem flags configurable through bpf_iter_udp_realloc_batch
bpf: net_sched: Fix using bpf qdisc as default qdisc
selftests/bpf: Fix compilation errors
====================
Link: https://patch.msgid.link/20250503010755.4030524-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trying to cut the branch you are sat on is pretty dumb. And so is
trying to disable the instruction set you are executing on.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250429114117.3618800-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Merge 6.15 block fixes in, once again, to resolve conflicts with the
fixes for ublk that went into mainline and the 6.16 ublk updates.
* block-6.15:
nvmet-auth: always free derived key data
nvmet-tcp: don't restore null sk_state_change
nvmet-tcp: select CONFIG_TLS from CONFIG_NVME_TARGET_TCP_TLS
nvme-tcp: select CONFIG_TLS from CONFIG_NVME_TCP_TLS
nvme-tcp: fix premature queue removal and I/O failover
nvme-pci: add quirks for WDC Blue SN550 15b7:5009
nvme-pci: add quirks for device 126f:1001
nvme-pci: fix queue unquiesce check on slot_reset
ublk: remove the check of ublk_need_req_ref() from __ublk_check_and_get_req
ublk: enhance check for register/unregister io buffer command
ublk: decouple zero copy from user copy
selftests: ublk: fix UBLK_F_NEED_GET_DATA
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a new test case to check:
- conntrack_max limit is effective
- conntrack_max limit cannot be exceeded from within a netns
- resizing the hash table while packets are inflight works
- removal of all conntrack rules disables conntrack in netns
- conntrack tool dump (conntrack -L) returns expected number
of (unique) entries
- procfs interface - if available - has same number of entries
as conntrack -L dump
Expected output with selftest framework:
selftests: net/netfilter: conntrack_resize.sh
PASS: got 1 connections: netns conntrack_max is pernet bound
PASS: got 100 connections: netns conntrack_max is init_net bound
PASS: dump in netns had same entry count (-C 1778, -L 1778, -p 1778, /proc 0)
PASS: dump in netns had same entry count (-C 2000, -L 2000, -p 2000, /proc 0)
PASS: test parallel conntrack dumps
PASS: resize+flood
PASS: got 0 connections: conntrack disabled
PASS: got 1 connections: conntrack enabled
ok 1 selftests: net/netfilter: conntrack_resize.sh
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card
-----BEGIN PGP SIGNATURE-----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=sF2D
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
Test the basic functionality for the NUMA and MPOL flags:
- FUTEX2_NUMA should take the NUMA node which is after the uaddr
and use it.
- Only update the node if FUTEX_NO_NODE was set by the user
- FUTEX2_MPOL should use the memory based on the policy. I attempted to
set the node with mbind() and then use this with MPOL but this fails
and futex falls back to the default node for the current CPU.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-22-bigeasy@linutronix.de
Test the basic functionality of the private hash:
- Upon start, with no threads there is no private hash.
- The first thread initializes the private hash.
- More than four threads will increase the size of the private hash if
the system has more than 16 CPUs online.
- Once the user sets the size of private hash, auto scaling is disabled.
- The user is only allowed to use numbers to the power of two.
- The user may request the global or make the hash immutable.
- Once the global hash has been set or the hash has been made immutable,
further changes are not allowed.
- Futex operations should work the whole time. It must be possible to
hold a lock, such a PI initialised mutex, during the resize operation.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250416162921.513656-21-bigeasy@linutronix.de
Some cleanups:
- Remove unnecessary kfuncs declaration
- Use _ns in the test name to run tests in a separate net namespace
- Call skeleton __attach() instead of bpf_map__attach_struct_ops() to
simplify tests.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Implement .destroy in bpf_fq and bpf_fifo as it is now mandatory.
Test attaching a bpf qdisc with a missing operator .init. This is not
allowed as bpf qdisc qdisc_watchdog_cancel() could have been called with
an uninitialized timer.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
First, test that bpf qdisc can be set as default qdisc. Then, attach
an mq qdisc to see if bpf qdisc can be successfully created and grafted.
The test is a sequential test as net.core.default_qdisc is global.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend sev_smoke_test to also run a minimal SEV-SNP smoke test that
initializes and sets up private memory regions required to run a simple
SEV-SNP guest.
Similar to its SEV-ES smoke test counterpart, this also does not
support GHCB and ucall yet and uses the GHCB MSR protocol to trigger an
exit of the type KVM_EXIT_SYSTEM_EVENT.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-11-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In preparation for SNP, cleanup the smoke test to decouple deriving type
from policy. This will allow reusing the existing interfaces for SNP.
No functional change intended.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-10-prsampat@amd.com
[sean: massage shortlog+changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Force the SEV-SNP VM type to set the KVM_MEM_GUEST_MEMFD flag for the
creation of private memslots.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-9-prsampat@amd.com
[sean: add a comment, don't break non-x86]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Extend the SEV library to include support for SNP ioctl() wrappers,
which aid in launching and interacting with a SEV-SNP guest.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-8-prsampat@amd.com
[sean: use BIT()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
In preparation for SNP, declutter the vm type check by introducing a
SEV-SNP VM type check as well as a transitive set of helper functions.
The SNP VM type is the subset of SEV-ES. Similarly, the SEV-ES and SNP
types are subset of the SEV VM type check.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-7-prsampat@amd.com
[sean: make the helpers static inlines]
Signed-off-by: Sean Christopherson <seanjc@google.com>
For SEV tests, assert() failures on VM type or fd do not provide
sufficient error reporting. Replace assert() with TEST_ASSERT_EQ() to
obtain more detailed information on the assertion condition failure,
including the call stack.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-6-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the SMT control check out of the hyperv_cpuid selftest so that it
is generally accessible all KVM selftests. Split the functionality into
a helper that populates a buffer with SMT control value which other
helpers can use to ascertain if SMT state is available and active.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-5-prsampat@amd.com
[sean: prepend is_ to the helpers]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Abstract rep vmmcall coded into the vmgexit helper for the sev
library.
No functional change intended.
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-4-prsampat@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add the X86_FEATURE_SEV_SNP CPU feature to the architectural definition
for the SEV-SNP VM type to exercise the KVM_SEV_INIT2 call. Ensure that
the SNP test is skipped in scenarios where CPUID supports it but KVM
does not, preventing reporting of failure in such cases.
Reviewed-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Pratik R. Sampat <prsampat@amd.com>
Link: https://lore.kernel.org/r/20250305230000.231025-3-prsampat@amd.com
[sean: use the same pattern as SEV and SEV-ES]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Introduce a set of tests that exercise various bucket resume scenarios:
* remove_seen resumes iteration after removing a socket from the bucket
that we've already processed. Before, with the offset-based approach,
this test would have skipped an unseen socket after resuming
iteration. With the cookie-based approach, we now see all sockets
exactly once.
* remove_unseen exercises the condition where the next socket that we
would have seen is removed from the bucket before we resume iteration.
This tests the scenario where we need to scan past the first cookie in
our remembered cookies list to find the socket from which to resume
iteration.
* remove_all exercises the condition where all sockets we remembered
were removed from the bucket to make sure iteration terminates and
returns no more results.
* add_some exercises the condition where a few, but not enough to
trigger a realloc, sockets are added to the head of the current bucket
between reads. Before, with the offset-based approach, this test would
have repeated sockets we've already seen. With the cookie-based
approach, we now see all sockets exactly once.
* force_realloc exercises the condition that we need to realloc the
batch on a subsequent read, since more sockets than can be held in the
current batch array were added to the current bucket. This exercies
the logic inside bpf_iter_udp_realloc_batch that copies cookies into
the new batch to make sure nothing is skipped or repeated.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Extend the iter_udp_soreuse and iter_tcp_soreuse programs to write the
cookie of the current socket, so that we can track the identity of the
sockets that the iterator has seen so far. Update the existing do_test
function to account for this change to the iterator program output. At
the same time, teach both programs to work with AF_INET as well.
Signed-off-by: Jordan Rife <jordan@jrife.io>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
The test's runtime (nearly 20s) is dangerously close to the limit (30s) on
qemu-system-riscv64:
$ time ./stackdump_test > /dev/null
real 0m19.210s
user 0m0.077s
sys 0m0.359s
There could be machines slower than qemu-system-riscv64. Therefore raise
the test timeout to 2 minutes to be safe.
Fixes: 15858da535 ("selftests: coredump: Add stackdump test")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/dd636084d55e7828782728d087fa2298dcab1c8b.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The test waits for coredump to finish by busy-waiting for the stack_values
file to be created. The maximum wait time is 10 seconds.
This doesn't work for slow machine (qemu-system-riscv64), because coredump
takes longer.
Fix it by waiting for the crashing child process to finish first.
Fixes: 15858da535 ("selftests: coredump: Add stackdump test")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/ee657f3fc8e19657cf7aaa366552d6347728f371.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
The buffer pointer "line" is not initialized. This pointer is passed to
getline().
It can still work if the stack is zero-initialized, because getline() can
work with a NULL pointer as buffer.
But this is obviously broken. This bug shows up while running the test on a
riscv64 machine.
Fix it by properly initializing the pointer.
Fixes: 15858da535 ("selftests: coredump: Add stackdump test")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/4fb9b6fb3e0040481bacc258c44b4aab5c4df35d.1744383419.git.namcao@linutronix.de
Signed-off-by: Christian Brauner <brauner@kernel.org>
Ensure the following prerequisites before executing the test:
1. 'socat' is installed on the remote host.
2. Python version supports socket.SO_INCOMING_CPU (available since v3.11).
Skip the test if either prerequisite is not met.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250430054801.750646-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Recently issues were observed with module BTF deduplication failures
[1]. Add a dedup selftest that ensures that core kernel types are
referenced from split BTF as base BTF types. To do this use bpf_testmod
functions which utilize core kernel types, specifically
ssize_t
bpf_testmod_test_write(struct file *file, struct kobject *kobj,
struct bin_attribute *bin_attr,
char *buf, loff_t off, size_t len);
__bpf_kfunc struct sock *bpf_kfunc_call_test3(struct sock *sk);
__bpf_kfunc void bpf_kfunc_call_test_pass_ctx(struct __sk_buff *skb);
For each of these ensure that the types they reference -
struct file, struct kobject, struct bin_attr etc - are in base BTF.
Note that because bpf_testmod.ko is built with distilled base BTF
the associated reference types - i.e. the PTR that points at a
"struct file" - will be in split BTF. As a result the test resolves
typedef and pointer references and verifies the pointed-at or
typedef'ed type is in base BTF. Because we use BTF from
/sys/kernel/btf/bpf_testmod relocation has occurred for the
referenced types and they will be base - not distilled base - types.
For large-scale dedup issues, we see such types appear in split BTF and
as a result this test fails. Hence it is proposed as a test which will
fail when large-scale dedup issues have occurred.
[1] https://lore.kernel.org/dwarves/CAADnVQL+-LiJGXwxD3jEUrOonO-fX0SZC8496dVzUXvfkB7gYQ@mail.gmail.com/
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250430134249.2451066-1-alan.maguire@oracle.com
Improve xdp_metadata bpf selftest in order to check it is possible for a
XDP dev-bound program to perform XDP_REDIRECT into a DEVMAP but it is still
not allowed to attach a XDP dev-bound program to a DEVMAP entry.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Things have calmed down on our end (knock on wood), no outstanding
investigations. Including fixes from Bluetooth and WiFi.
Current release - fix to a fix:
- igc: fix lock order in igc_ptp_reset
Current release - new code bugs:
- Revert "wifi: iwlwifi: make no_160 more generic", fixes regression
to Killer line of devices reported by a number of people
- Revert "wifi: iwlwifi: add support for BE213", initial FW is too buggy
- number of fixes for mld, the new Intel WiFi subdriver
Previous releases - regressions:
- wifi: mac80211: restore monitor for outgoing frames
- drv: vmxnet3: fix malformed packet sizing in vmxnet3_process_xdp
- eth: bnxt_en: fix timestamping FIFO getting out of sync on reset,
delivering stale timestamps
- use sock_gen_put() in the TCP fraglist GRO heuristic, don't assume
every socket is a full socket
Previous releases - always broken:
- sched: adapt qdiscs for reentrant enqueue cases, fix list corruptions
- xsk: fix race condition in AF_XDP generic RX path, shared UMEM
can't be protected by a per-socket lock
- eth: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
- btusb: avoid NULL pointer dereference in skb_dequeue()
- dsa: felix: fix broken taprio gate states after clock jump
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6xNz
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Happy May Day.
Things have calmed down on our end (knock on wood), no outstanding
investigations. Including fixes from Bluetooth and WiFi.
Current release - fix to a fix:
- igc: fix lock order in igc_ptp_reset
Current release - new code bugs:
- Revert "wifi: iwlwifi: make no_160 more generic", fixes regression
to Killer line of devices reported by a number of people
- Revert "wifi: iwlwifi: add support for BE213", initial FW is too
buggy
- number of fixes for mld, the new Intel WiFi subdriver
Previous releases - regressions:
- wifi: mac80211: restore monitor for outgoing frames
- drv: vmxnet3: fix malformed packet sizing in vmxnet3_process_xdp
- eth: bnxt_en: fix timestamping FIFO getting out of sync on reset,
delivering stale timestamps
- use sock_gen_put() in the TCP fraglist GRO heuristic, don't assume
every socket is a full socket
Previous releases - always broken:
- sched: adapt qdiscs for reentrant enqueue cases, fix list
corruptions
- xsk: fix race condition in AF_XDP generic RX path, shared UMEM
can't be protected by a per-socket lock
- eth: mtk-star-emac: fix spinlock recursion issues on rx/tx poll
- btusb: avoid NULL pointer dereference in skb_dequeue()
- dsa: felix: fix broken taprio gate states after clock jump"
* tag 'net-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: vertexcom: mse102x: Fix RX error handling
net: vertexcom: mse102x: Add range check for CMD_RTS
net: vertexcom: mse102x: Fix LEN_MASK
net: vertexcom: mse102x: Fix possible stuck of SPI interrupt
net: hns3: defer calling ptp_clock_register()
net: hns3: fixed debugfs tm_qset size
net: hns3: fix an interrupt residual problem
net: hns3: store rx VLAN tag offload state for VF
octeon_ep: Fix host hang issue during device reboot
net: fec: ERR007885 Workaround for conventional TX
net: lan743x: Fix memleak issue when GSO enabled
ptp: ocp: Fix NULL dereference in Adva board SMA sysfs operations
net: use sock_gen_put() when sk_state is TCP_TIME_WAIT
bnxt_en: fix module unload sequence
bnxt_en: Fix ethtool -d byte order for 32-bit values
bnxt_en: Fix out-of-bound memcpy() during ethtool -w
bnxt_en: Fix coredump logic to free allocated buffer
bnxt_en: delay pci_alloc_irq_vectors() in the AER path
bnxt_en: call pci_alloc_irq_vectors() after bnxt_reserve_rings()
bnxt_en: Add missing skb_mark_for_recycle() in bnxt_rx_vlan()
...
Merge series from Olivier Moysan <olivier.moysan@foss.st.com>:
This patchset adds some checks on kernel minimum rate requirements.
This avoids potential clock rate misconfiguration, when setting the
kernel frequency on STM32MP2 SoCs.
The inconsistencies in the systcall ABI between arm and arm-compat can
can cause a failure in the syscall_restart test due to the logic
attempting to work around the differences. The 'machine' field for an
ARM64 device running in compat mode can report 'armv8l' or 'armv8b'
which matches with the string 'arm' when only examining the first three
characters of the string.
This change adds additional validation to the workaround logic to make
sure we only take the arm path when running natively, not in arm-compat.
Fixes: 256d0afb11 ("selftests/seccomp: build and pass on arm64")
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://lore.kernel.org/r/20250427094103.3488304-2-nkapron@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Add a forwarding path test for tc-taprio, based on isochron. This is
specifically intended for NICs with an offloaded data path (switchdev/DSA)
and requires taprio 'flags 2'. Also, $h1 and $h2 must support hardware
timestamping, and $h1 tc-etf offload, for isochron to work.
Packets received by a switch while the egress port has a taprio schedule
with an open gate for the traffic class must be sent right away.
Packets received by the switch while the traffic class gate must be
delayed until it opens.
Packets received by the switch must be dropped if the gate for the
traffic class never opens.
Packets should pass if the maximum SDU for the traffic class allows it,
and should be dropped otherwise.
The schedule should auto-update itself if clock jumps take place while
taprio is installed. Repeat most of the above tests after forcing two
clock jumps, one backwards (in Jan 1970) and one back into the present.
Symlink it from tools/testing/selftests/drivers/net/dsa, because usually
DSA ports have the same MAC address, and we need STABLE_MAC_ADDRS=yes
from its forwarding.config for the test to run successfully.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make out-of-band testing (send a packet when its traffic class gate is
closed, expecting it to be delayed) more predictable by allowing the
window size to be customized by isochron_do().
From man isochron-send, the window size alters the advance time (the
delta between the transmission time of the packet, and its expected TX
time when using SO_TXTIME or tc-taprio on the sender). In absence of the
argument, isochron-send defaults to maximizing the advance time (making
it equal to the cycle length).
The default behavior is exactly what is problematic. An advance time
that is too large will make packets intended to be out-of-band still be
potentially in-band with an open gate from the schedule's previous cycle.
We need to allow that advance time to be reduced.
Perhaps a bit confusingly, isochron_do() has a shift_time argument
currently, but that does not help here. The shift time shifts both the
user space wakeup time and the expected TX time by equal amounts, it is
unable of bringing them closer to one another.
Set the window size properly for the Ocelot PSFP selftest as well.
That used to work due to a very carefully chosen SHIFT_TIME_NS.
I've re-tested that the test still works properly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This snippet will be necessary for a future isochron-based test, so
provide a simpler high-level interface for counting the received
packets.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250426144859.3128352-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the CONFIG_NET_SCH_BPF configuration is not enabled,
the BPF test compilation will report the following error:
In file included from progs/bpf_qdisc_fq.c:39:
progs/bpf_qdisc_common.h:17:51: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
17 | void bpf_qdisc_skb_drop(struct sk_buff *p, struct bpf_sk_buff_ptr *to_free) __ksym;
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
309 | struct bpf_sk_buff_ptr *to_free)
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
progs/bpf_qdisc_fq.c:308:5: error: conflicting types for '____bpf_fq_enqueue'
Fixes: 11c701639b ("selftests/bpf: Add a basic fifo qdisc test")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250428033445.58113-1-yangfeng59949@163.com
The closing parentheses around the read syscall is misplaced, causing
single byte reads from the iterator instead of buf sized reads. While
the end result is the same, many more read calls than necessary are
performed.
$ tools/testing/selftests/bpf/vmtest.sh "./test_progs -t kmem_cache_iter"
145/1 kmem_cache_iter/check_task_struct:OK
145/2 kmem_cache_iter/check_slabinfo:OK
145/3 kmem_cache_iter/open_coded_iter:OK
145 kmem_cache_iter:OK
Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED
Fixes: a496d0cdc8 ("selftests/bpf: Add a test for kmem_cache_iter")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20250428180256.1482899-1-tjmercier@google.com
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEq1nRK9aeMoq1VSgcnJ2qBz9kQNkFAmgREt8ACgkQnJ2qBz9k
QNkYgggAshgJV9OieA91SMXAZgExns4oDPCKj2yuEDcX0hvYEBpHXo+Rp0QNgRav
G3mT4eSvK6oWxSnWyijsmWp+BQxrBEa/M5LIsSv5qcmuOmiJliCnKXEdbhiHl9n+
D429k2+H6ajlwtaty4XnPpVEUYnBNAHxEwYZGRP7zJWET1KFfAcemUogzoWqqh/9
AN17J/F4v6H92th3qP6AlDAyoAeEIsdKDzX6EI2ZPnj/UdYXJKvCJsUQS5LfatrY
NHmoYooBpdjpuD8r1QlOnxUsgUDinOrVdTrPKWfI711zeP6kMCFgFzZeJhNR/lTL
88G18ZDpjy6lEI4a248+QHpV+a8IVg==
=OJXd
-----END PGP SIGNATURE-----
Merge tag 'fsnotify_for_v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull fsnotify fix from Jan Kara:
"A fix for the recently merged mount notification support"
* tag 'fsnotify_for_v6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
selftests/fs/mount-notify: test also remove/flush of mntns marks
fanotify: fix flush of mntns marks
* pass 'size' rather than 'end' to memblock_set_node() as that function
expects
* fix a corner case when memblock.reserved is doubled at
memmap_init_reserved_pages() and the newly reserved block won't have nid
assigned
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmgQcBAQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kTJhB/47k2dGWPOANZHaDfPZRCscDdp9iJCyV71D
PjJ+LHPXswQ5AA3v7cioXhlXF1+sqOUx+Hy4ZPmk+UCAJhAtVv7nj2V7t+F9QHM/
qtmSpYRc0bCESc55LPKIEW8q1A6VbZH5Obg15xs54X2UaBCARA2kR9rBq39cnhl0
vK4ygu70rI/Yi/IuxDitw4UV2k3wdep8jWdCnQWe0+qzpft5KY3kozylJQUK6k8k
TOjjm/1EJa3P4bwzmBdkz86eYLGinfuB3Y0XK7oY6Ji5QKKMNvOsJC0hO2dQMQ1n
8vBBfwYlytlFG27cmnHvvE+HkyNiNNRr5Hcyk+gfnguR7stH+uq6
=T4cO
-----END PGP SIGNATURE-----
Merge tag 'fixes-2025-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
"Fixes for nid setting in memmap_init_reserved_pages():
- pass 'size' rather than 'end' to memblock_set_node() as that
function expects
- fix a corner case when memblock.reserved is doubled at
memmap_init_reserved_pages() and the newly reserved block
won't have nid assigned"
* tag 'fixes-2025-04-29' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: add test for memblock_set_node
mm/memblock: repeat setting reserved region nid if array is doubled
mm/memblock: pass size instead of end to memblock_set_node()
Parse JSON from ethtool -g instead of parsing text output.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250426195525.1906774-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Verify that TCP connections use both routes when connecting multiple
times to a remote service over a two nexthop multipath route.
Use socat to create the connections. Use tc prio + tc filter to
count routes taken, counting SYN packets across the two egress
devices. Also verify that the saddr matches that of the device.
To avoid flaky tests when testing inherently randomized behavior,
set a low bar and pass if even a single SYN is observed on each
device.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424143549.669426-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 57e13a2e8c ("selftests: ublk: support user recovery") starts to
support UBLK_F_NEED_GET_DATA for covering recovery feature, however the
ublk utility implementation isn't done correctly.
Fix it by supporting UBLK_F_NEED_GET_DATA correctly.
Also add test generic_07 for covering UBLK_F_NEED_GET_DATA.
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 57e13a2e8c ("selftests: ublk: support user recovery")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250429022941.1718671-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add 5 TDC tests that exercise the reentrant enqueue behaviour in drr,
ets, qfq, and hfsc:
- Test DRR's enqueue reentrant behaviour with netem (which caused a
double list add)
- Test ETS's enqueue reentrant behaviour with netem (which caused a double
list add)
- Test QFQ's enqueue reentrant behaviour with netem (which caused a double
list add)
- Test HFSC's enqueue reentrant behaviour with netem (which caused a UAF)
- Test nested DRR's enqueue reentrant behaviour with netem (which caused a
double list add)
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250425220710.3964791-6-victor@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The selftest reproduces the deadlock scenario when binding/unbinding XDP
program, XDP socket, rx ring resize on virtio_net interface.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20250425071018.36078-5-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When binding the XDP socket, we may get EBUSY because the deferred
destructor of XDP socket in previous test has not been executed yet. If
that is the case, just sleep and retry some times.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20250425071018.36078-4-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds an optional -z flag to xdp_helper. When this flag is
provided, the XDP socket binding is forced to be in zerocopy mode.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20250425071018.36078-3-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move xdp_helper to net/lib to make it easier for other selftests to use
the helper.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20250425071018.36078-2-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5H9J
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull PCI fixes from Bjorn Helgaas:
- When releasing a start-aligned resource, e.g., a bridge window, save
start/end/flags for the next assignment attempt; fixes a v6.15-rc1
regression (Ilpo Järvinen)
- Move set_pcie_speed.sh from TEST_PROGS to TEST_FILE; fixes a bwctrl
selftest v6.15-rc1 regression (Ilpo Järvinen)
- Add Manivannan Sadhasivam as maintainer of native host bridge and
endpoint drivers (Manivannan Sadhasivam)
- In endpoint test driver, defer IRQ allocation from .probe() until
ioctl() to fix a regression on platforms where the Vendor/Device ID
match doesn't include driver_data (Niklas Cassel)
* tag 'pci-v6.15-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
misc: pci_endpoint_test: Defer IRQ allocation until ioctl(PCITEST_SET_IRQTYPE)
MAINTAINERS: Move Manivannan Sadhasivam as PCI Native host bridge and endpoint maintainer
selftests/pcie_bwctrl: Fix test progs list
PCI: Restore assigned resources fully after release
- Ensure prime numbers tests are included in KUnit test runs (Mark Brown)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaAx24QAKCRA2KwveOeQk
u/WXAQDRZAsdpqBj1iweOnX06kzfcvESQmq5uSRXVemZz6RBFgD+MHDswX4LuXna
7X20JmItisQeZYnW57NPtAut3ea73QY=
=NcCJ
-----END PGP SIGNATURE-----
Merge tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull kunit fix from Kees Cook:
"A single fix for the kunit lib/tests/ relocation:
- Ensure prime numbers tests are included in KUnit test runs (Mark Brown)"
* tag 'move-lib-kunit-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib: Ensure prime numbers tests are included in KUnit test runs
Recent discussions around commit ad1afb0039 ("vlan_dev: VLAN 0 should
be treated as "no vlan tag" (802.1p packet)") have sparked the question
what happens with the DSA (and possibly other switchdev) data path when
the bridge says that ports should have no PVID VLAN, but the 8021q
module, as the result of a NETDEV_UP event, decides it should add VID 0
to the RX filter of those bridge ports. Do those bridge ports receive
packets tagged with VID 0 or not, now? We don't know, there is no test.
In the veth realm, this passes trivially, because veth is not VLAN
filtering and this, the 8021q module lacks the instinct to add VID 0 in
the first place.
In the realm of VLAN filtering NICs with no switchdev offload, this
should also pass, because the VLAN groups of the software bridge are
consulted, where it can clearly be seen that a PVID is missing, even
though the packet was initially accepted by the NIC.
The test only poses a challenge for switchdev drivers, which usually
have to program to hardware both VLANs from RX filtering, as well as
from switchdev. Especially when a switchdev port joins a VLAN-aware
bridge, it is unavoidable that it gains the NETIF_F_HW_VLAN_CTAG_FILTER
feature, i.e. any 8021q uppers that the bridge port may have must also
be committed to the RX filtering table of the interface. When a
VLAN-tagged packet is physically received by the port, it is initially
indistinguishable whether it will reach the bridge data path or the
8021q upper data path.
That is rather the final step of the new tests that we introduce.
We need to build context up to that stage, which means the following:
- we need to test that 802.1p (VID 0) tagged traffic is received in the
first place (on bridge ports with a valid PVID). This is the "8021p"
test.
- we need to test that the usual paths of reaching a configuration with
no PVID on a bridge port are all covered and they all reach the same
state.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250424223734.3096202-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RSS contexts are used to shard work across multiple queues for an
application using io_uring zero copy receive. Add a test case checking
that steering flows into an RSS context works.
Until I add multi-thread support to the selftest binary, this test case
only has 1 queue in the RSS context.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250425022049.3474590-4-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting hds_thresh to 0 is required for queue reset.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250425022049.3474590-3-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to using defer() for putting the NIC back to the original state
prior to running the selftest.
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250425022049.3474590-2-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure that CAN_USE_BPF_ST test (compute_live_registers/store) is
enabled when __clang_major__ >= 18.
Fixes: 2ea8f6a1cd ("selftests/bpf: test cases for compute_live_registers()")
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/20250425213712.1542077-1-yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Series to fix using the wrong GPF DVSEC location
- Fix caching of dport GPF DVSEC from the first endpoint
- Ensure that the GPF phase timeout is only updated once by first endpoint
- Drop is_port parameter for cxl_gpf_get_dvsec()
- Fix the devm_* call host device for CXL fwctl setup
- Set the out_len in Set Features failure case
- Fix RCD initialization by skipping unneeded mem_en check
-----BEGIN PGP SIGNATURE-----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=CgkA
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dave Jiang:
"The fixes address global persistent flush (GPF) changes and CXL
Features support changes that went in the 6.15 merge window. And also
a fix to an issue observed on CXL 1.1 platform during device
enumeration.
Summary:
- Fix using the wrong GPF DVSEC location:
- Fix caching of dport GPF DVSEC from the first endpoint
- Ensure that the GPF phase timeout is only updated once by first
endpoint
- Drop is_port parameter for cxl_gpf_get_dvsec()
- Fix the devm_* call host device for CXL fwctl setup
- Set the out_len in Set Features failure case
- Fix RCD initialization by skipping unneeded mem_en check"
* tag 'cxl-fixes-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/regs.c: Skip Memory Space Enable check for RCD and RCH Ports
cxl/feature: Update out_len in set feature failure case
cxl: Fix devm host device for CXL fwctl initialization
cxl/pci: Drop the parameter is_port of cxl_gpf_get_dvsec()
cxl/pci: Update Port GPF timeout only when the first EP attaching
cxl/core: Fix caching dport GPF DVSEC issue
-----BEGIN PGP SIGNATURE-----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=s0NF
-----END PGP SIGNATURE-----
Merge tag 'block-6.15-20250424' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- Fix autoloading of drivers from stat*(2)
- Fix losing read-ahead setting one suspend/resume, when a device is
re-probed.
- Fix race between setting the block size and page cache updates.
Includes a helper that a coming XFS fix will use as well.
- ublk cancelation fixes.
- ublk selftest additions and fixes.
- NVMe pull via Christoph:
- fix an out-of-bounds access in nvmet_enable_port (Richard
Weinberger)
* tag 'block-6.15-20250424' of git://git.kernel.dk/linux:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
Add test that modifies the map while it's being iterated in such a way that
hangs the kernel thread unless the _safe fix is applied to
bpf_for_each_hash_elem.
Signed-off-by: Brandon Kammerdiener <brandon.kammerdiener@intel.com>
Link: https://lore.kernel.org/r/20250424153246.141677-3-brandon.kammerdiener@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Merge 6.15 block fixes - both to get the fixes causing issues with
XFS testing, but also to make it easier for 6.16 ublk patches to avoid
conflicts.
* block-6.15:
ublk: fix race between io_uring_cmd_complete_in_task and ublk_cancel_cmd
ublk: call ublk_dispatch_req() for handling UBLK_U_IO_NEED_GET_DATA
block: don't autoload drivers on blk-cgroup configuration
block: don't autoload drivers on stat
block: remove the backing_inode variable in bdev_statx
block: move blkdev_{get,put} _no_open prototypes out of blkdev.h
block: never reduce ra_pages in blk_apply_bdi_limits
selftests: ublk: common: fix _get_disk_dev_t for pre-9.0 coreutils
selftests: ublk: remove useless 'delay_us' from 'struct dev_ctx'
selftests: ublk: fix recover test
block: hoist block size validation code to a separate function
block: fix race between set_blocksize and read paths
nvmet: fix out-of-bounds access in nvmet_enable_port
Test that the SO_INCOMING_NAPI_ID of a network file descriptor is
non-zero. This ensures that either the core networking stack or, in some
cases like netdevsim, the driver correctly sets the NAPI ID.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250424002746.16891-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Copy the big-endian field declarations from qspinlock_types.h,
otherwise some properties won't hold on big-endian systems. For
example, assigning lock->val = 1 should result in lock->locked == 1,
which is not the case there.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-4-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_arena_spin_lock_size() explicitly requires having at least 2 CPUs,
but if the machine has less than 16, then pthread_setaffinity_np() call
in spin_lock_thread() fails.
Cap threads to the number of CPUs.
Alternative solutions are raising the number of required CPUs to 16, or
pinning multiple threads to the same CPU, but they are not that useful.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-3-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Changing bpf_arena_spin_lock.h does not lead to recompiling
arena_spin_lock.c. By convention, all BPF progs depend on all
header files in progs/, so move this header file there. There
are no other users besides arena_spin_lock.c.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/r/20250424165525.154403-2-iii@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Use the API `sysconf()` to query page size at runtime, instead of using
hard code number 4096.
And use `posix_memalign` to allocate the page size aligned momory.
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250419141044.10304-1-haiyuewa@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCaAp+shAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSAukA/1FkHkyqXaiMYy2s4tlwvpjWMBP11gEUzyYM
j1HIn3rOAQDUT1V2q+Ff5ZVk4hsCZ8pJMTmrASSL/CHw1yfQHtzQAw==
=5RX1
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fix some Landlock audit issues, add related tests, and updates
documentation"
* tag 'landlock-6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Update log documentation
landlock: Fix documentation for landlock_restrict_self(2)
landlock: Fix documentation for landlock_create_ruleset(2)
selftests/landlock: Add PID tests for audit records
selftests/landlock: Factor out audit fixture in audit_test
landlock: Log the TGID of the domain creator
landlock: Remove incorrect warning
Cross-merge networking fixes after downstream PR (net-6.15-rc4).
This pull includes wireless and a fix to vxlan which isn't
in Linus's tree just yet. The latter creates with a silent conflict
/ build breakage, so merging it now to avoid causing problems.
drivers/net/vxlan/vxlan_vnifilter.c
094adad913 ("vxlan: Use a single lock to protect the FDB table")
087a9eb9e5 ("vxlan: vnifilter: Fix unlocked deletion of default FDB entry")
https://lore.kernel.org/20250423145131.513029-1-idosch@nvidia.com
No "normal" conflicts, or adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some distributions, such as centos stream 9, still have a version of
coreutils which does not yet support the %Hr and %Lr formats for stat(1)
[1, 2]. Running ublk selftests on these distributions results in the
following error in tests that use the _get_disk_dev_t helper:
line 23: ?r: syntax error: operand expected (error token is "?r")
To better accommodate older distributions, rewrite _get_disk_dev_t to
use the much older %t and %T formats for stat instead.
[1] https://github.com/coreutils/coreutils/blob/v9.0/NEWS#L114
[2] https://pkgs.org/download/coreutils
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250423-ublk_selftests-v1-2-7d060e260e76@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a selftest to exercise the condition where qdisc implementations
like netem or codel might empty the queue during a peek operation.
This tests the defensive code path in HFSC that checks the queue length
again after peeking to handle this case.
Based on the reproducer from Gerrard, improved by Jamal.
Reported-by: Gerrard Tai <gerrard.tai@starlabs.sg>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20250417184732.943057-4-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tc_redirect/tc_redirect_dtime fails intermittently on some systems
with:
(network_helpers.c:303: errno: Operation now in progress) Failed to connect to server
The problem is that on these systems systemd-networkd and systemd-udevd
are installed in the default configuration, which includes:
/usr/lib/systemd/network/99-default.link
/usr/lib/udev/rules.d/80-net-setup-link.rules
These configs instruct systemd to change MAC addresses of newly created
interfaces, which includes the ones created by BPF selftests. In this
particular case it causes SYN+ACK packets to be dropped, because they
get the PACKET_OTHERHOST type - the fact that this causes a connect()
on a blocking socket to return -EINPROGRESS looks like a bug, which
needs to be investigated separately.
systemd won't change the MAC address if the kernel reports that it was
already set by userspace; the NET_ADDR_SET check in
link_generate_new_hw_addr() is responsible for this.
In order to eliminate the race window between systemd and the test,
set MAC addresses during link creation. Ignore checkpatch's "quoted
string split across lines" warning, since it points to a command line,
and not a user-visible message.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250416124845.584362-1-iii@linux.ibm.com
When running diag.sh in a loop, chk_dump_one will report the following
"grep: write error":
13 ....chk 2 cestab [ OK ]
grep: write error
14 ....chk dump_one [ OK ]
15 ....chk 2->0 msk in use after flush [ OK ]
16 ....chk 2->0 cestab after flush [ OK ]
This error is caused by a broken pipe. When the output of 'ss' is processed
by grep, 'head -n 1' will exit immediately after getting the first line,
causing the subsequent pipe to close. At this time, if 'grep' is still
trying to write data to the closed pipe, it will trigger a SIGPIPE signal,
causing a write error.
One solution is not to use this problematic "head -n 1" command, but to use
mptcp_lib_get_info_value() helper defined in mptcp_lib.sh to get the value
of 'token'.
Fixes: ba24001665 ("selftests: mptcp: add a test for mptcp_diag_dump_one")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Gang Yan <yangang@kylinos.cn>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250421-net-mptcp-pm-defer-freeing-v1-2-e731dc6e86b9@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'delay_us' shouldn't be added to 'struct dev_ctx' since now it is
handled by per-target command line & 'struct fault_inject_ctx'.
So remove it.
Fixes: 81586652bb ("selftests: ublk: add generic_06 for covering fault inject")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250421235947.715272-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When adding recovery test:
- 'break' is missed for handling '-g' argument
- test name of test_generic_05.sh is wrong
So fix the two.
Fixes: 57e13a2e8c ("selftests: ublk: support user recovery")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250421235947.715272-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Adding verifier test for accessing const void pointer argument in
tracing programs.
The test program loads 1st argument of bpf_fentry_test10 function
which is const void pointer and checks that verifier allows that.
Signed-off-by: KaFai Wan <mannkafai@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250423121329.3163461-3-mannkafai@gmail.com
Change ALL_TESTS definition to "test-per-line".
Add the test case of per vlan snooping with port stp state change to
forwarding and also vlan equivalent case in both bridge_igmp.sh and
bridge_mld.sh.
Signed-off-by: Yong Wang <yongwang@nvidia.com>
Reviewed-by: Andy Roulin <aroulin@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Static analysis found an issue in bench_htab_mem.c and sk_assign.c
cppcheck output before this patch:
tools/testing/selftests/bpf/benchs/bench_htab_mem.c:284:3: error: Resource leak: fd [resourceLeak]
tools/testing/selftests/bpf/prog_tests/sk_assign.c:41:3: error: Resource leak: tc [resourceLeak]
cppcheck output after this patch:
No resource leaks found
Fix the issue by closing the file descriptors fd and tc.
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250421174405.26080-1-malayarout91@gmail.com
When the select of PRIME_MUMBERS was removed from it's KUnit test
Kconfig nothing was added to the KUnit configs, meaning that when run
via the KUnit runner the tests are neither built nor run. Add
PRIME_NUMBERS to all_tests.config so they are enabled when the KUnit
runner builds the kernel.
Fixes: 3f2925174f ("lib/prime_numbers: KUnit test should not select PRIME_NUMBERS")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250422-lib-fix-prime-numbers-kunit-v1-1-4278c1d4a4ae@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
printf can pad each argument to a certain width.
Implement this for compatibility with the kselftest harness.
Currently only padding with spaces is supported.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
Now that we have a proper snprintf() implementation,
make sure truncation is handled properly.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
With the addition of snprintf() and its usage in nolibc-test, the name of
the "vfprintf" test suite is not accurate anymore.
Rename the suite to be more generic.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
With a proper snprintf() implementation in place, the ugly pipe usage is
not necessary anymore.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
nolibc's waitpid() now uses the waitid() syscall internally.
This removes the original reasoning for the reverted commit as
waitpid() is now available on all platforms and has an easier interface.
Switch back to waitpid().
This reverts commit a0bc8947ac.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
In nolibc intmax_t and uintmax_t are always the same as
(unsigned) long long/uint64_t as 128bit numbers are not supported.
Even libcs that do support 128bit numbers often fix intmax_t to 64bit
as it is used in ABIs and any change would break those.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Willy Tarreau <w@1wt.eu>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCaAFFvgAKCRAraS+Z+3y5
E/1OAP9SGmTMgHuHLlF8en+MaYdtwgcHy6uurXgbSQAAV/RwwQEAh2oXZE1D9I7a
EtxsaJYqbbhD09RPwWa2Rd8iJrJYXQk=
=qcoU
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-04-17
We've added 12 non-merge commits during the last 9 day(s) which contain
a total of 18 files changed, 1748 insertions(+), 19 deletions(-).
The main changes are:
1) bpf qdisc support, from Amery Hung.
A qdisc can be implemented in bpf struct_ops programs and
can be used the same as other existing qdiscs in the
"tc qdisc" command.
2) Add xsk tail adjustment tests, from Tushar Vyavahare.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test attaching bpf qdisc to mq and non root
selftests/bpf: Add a bpf fq qdisc to selftest
selftests/bpf: Add a basic fifo qdisc test
libbpf: Support creating and destroying qdisc
bpf: net_sched: Disable attaching bpf qdisc to non root
bpf: net_sched: Support updating bstats
bpf: net_sched: Add a qdisc watchdog timer
bpf: net_sched: Add basic bpf qdisc kfuncs
bpf: net_sched: Support implementation of Qdisc_ops in bpf
bpf: Prepare to reuse get_ctx_arg_idx
selftests/xsk: Add tail adjustment tests and support check
selftests/xsk: Add packet stream replacement function
====================
Link: https://patch.msgid.link/20250417184338.3152168-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where some
variables could be used without being initialized, and done subtly where
the compiler did not catch it. Initialize those variables to the
EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still be
referenced later. To prevent use-after-free bugs, initialize them back to
the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers, but
left the original hash that they were pointing to where they are no longer
used. This caused a memory leak. Free the hashes that are pointed to by
the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which made
the hash bit size of 5. The hash size is supposed to be limited by the bit
size of the hash, as the bitmask is allowed to be greater than 5. Rework
the size check to first pass the number of elements to fls() and then
compare that to FTRACE_HASH_MAX_BITS before allocating the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but the
output showed it as unsigned long and use "%lu". Change it to unsigned int
and use "%u" in the print format that is displayed to user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and strncpy_from_user_nofault()
was used to determine if reading the strings would fault or not. It would
return fault if the value was non zero, which is basically meant that it
was always considering the read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self test to
make sure that it continues to work.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaAPqNRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qv5nAP4mqIgne7tzMhHIH/nQGM/7Dj98n+Vt
BXm6VifVdVJvtAD+KCDipZ2MspGEeZX3SDSnvBuj0S+OX9T9CTWPv+rFUwE=
=AWY4
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Initialize hash variables in ftrace subops logic
The fix that simplified the ftrace subops logic opened a path where
some variables could be used without being initialized, and done
subtly where the compiler did not catch it. Initialize those
variables to the EMPTY_HASH, which is the default hash.
- Reinitialize the hash pointers after they are freed
Some of the hash pointers in the subop logic were freed but may still
be referenced later. To prevent use-after-free bugs, initialize them
back to the EMPTY_HASH.
- Free the ftrace hashes when they are replaced
The fix that simplified the subops logic updated some hash pointers,
but left the original hash that they were pointing to where they are
no longer used. This caused a memory leak. Free the hashes that are
pointed to by the pointers when they are replaced.
- Fix size initialization of ftrace direct function hash
The ftrace direct function hash used by BPF initialized the hash size
incorrectly. It checked the size of items to a hard coded 32, which
made the hash bit size of 5. The hash size is supposed to be limited
by the bit size of the hash, as the bitmask is allowed to be greater
than 5. Rework the size check to first pass the number of elements to
fls() and then compare that to FTRACE_HASH_MAX_BITS before allocating
the hash.
- Fix format output of ftrace_graph_ent_entry event
The field depth of the ftrace_graph_ent_entry event is of size 4 but
the output showed it as unsigned long and use "%lu". Change it to
unsigned int and use "%u" in the print format that is displayed to
user space.
- Fix the trace event filter on strings
Events can be filtered on numbers or string values. The return value
checked from strncpy_from_kernel_nofault() and
strncpy_from_user_nofault() was used to determine if reading the
strings would fault or not. It would return fault if the value was
non zero, which is basically meant that it was always considering the
read as a fault.
- Add selftest to test trace event string filtering
In order to catch the breakage of the string filtering, add a self
test to make sure that it continues to work.
* tag 'trace-v6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: selftests: Add testing a user string to filters
tracing: Fix filter string testing
ftrace: Fix type of ftrace_graph_ent_entry.depth
ftrace: fix incorrect hash size in register_ftrace_direct()
ftrace: Free ftrace hashes after they are replaced in the subops code
ftrace: Reinitialize hash to EMPTY_HASH after freeing
ftrace: Initialize variables for ftrace_startup/shutdown_subops()
UBSAN detects undefined behaviour at runtime.
To avoid introduction of new UB, enable UBSAN for nolibc-test.
By signalling detected errors through traps no runtime dependency
is necessary.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250419-nolibc-ubsan-v2-7-060b8a016917@weissschuh.net
- lib/prime_numbers: KUnit test should not select PRIME_NUMBERS
(Geert Uytterhoeven)
- ubsan: Fix panic from test_ubsan_out_of_bounds (Mostafa Saleh)
- ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP (Nathan Chancellor)
- string: Add load_unaligned_zeropad() code path to sized_strscpy()
(Peter Collingbourne)
- kasan: Add strscpy() test to trigger tag fault on arm64 (Vincenzo
Frascino)
- Disable GCC randstruct for COMPILE_TEST
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCaAKv9QAKCRA2KwveOeQk
u160AP90D0BTkrwYIt1oRMOlN0LX0oipfFDiOKrxuZpgfwqYgwD/XHlTCglva+Kl
1Y0T/wUpA4tL8XoKtcs/kBzsWNyI6wU=
=4ji5
-----END PGP SIGNATURE-----
Merge tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- lib/prime_numbers: KUnit test should not select PRIME_NUMBERS (Geert
Uytterhoeven)
- ubsan: Fix panic from test_ubsan_out_of_bounds (Mostafa Saleh)
- ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP (Nathan
Chancellor)
- string: Add load_unaligned_zeropad() code path to sized_strscpy()
(Peter Collingbourne)
- kasan: Add strscpy() test to trigger tag fault on arm64 (Vincenzo
Frascino)
- Disable GCC randstruct for COMPILE_TEST
* tag 'hardening-v6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/prime_numbers: KUnit test should not select PRIME_NUMBERS
ubsan: Fix panic from test_ubsan_out_of_bounds
lib/Kconfig.ubsan: Remove 'default UBSAN' from UBSAN_INTEGER_WRAP
hardening: Disable GCC randstruct for COMPILE_TEST
kasan: Add strscpy() test to trigger tag fault on arm64
string: Add load_unaligned_zeropad() code path to sized_strscpy()
Fixes dynevent_limitations.tc test failure on dash by detecting and
handling bash and dash differences in evaluating \\.
-----BEGIN PGP SIGNATURE-----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=Qxf6
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fix from Shuah Khan:
"Fixes dynevent_limitations.tc test failure on dash by detecting and
handling bash and dash differences in evaluating \\"
* tag 'linux_kselftest-fixes-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Differentiate bash and dash in dynevent_limitations.tc
Testing revealed the following error message for a CXL memdev that has
Feature support:
[ 56.690430] cxl mem0: Resources present before probing
Attach the allocation of cxl_fwctl to the parent device of cxl_memdev.
devm_add_* calls for cxl_memdev should not happen before the memdev
probe function or outside the scope of the memdev driver.
cxl_test missed this bug because cxl_test always arranges for the
cxl_mem driver to be loaded before cxl_mock_mem runs. So the driver core
always finds the devres list idle in that case.
[DJ: Updated subject title and added commit log suggestion from djbw]
Fixes: 858ce2f56b ("cxl: Add FWCTL support to CXL")
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/linux-cxl/6801aea053466_71fe2944c@dwillia2-xfh.jf.intel.com.notmuch/
Link: https://patch.msgid.link/20250418002933.406439-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Running the following commands was broken:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
And would produce nothing when it should have produced something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Add a test to check this case so that it will be caught if it breaks
again.
Link: https://lore.kernel.org/linux-trace-kernel/20250417183003.505835fb@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/20250418101208.38dc81f5@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Commit df6f8c4d72 ("selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to
TEST_PROGS") added set_pcie_speed.sh into TEST_PROGS but that script is a
helper that is only being called by set_pcie_cooling_state.sh, not a test
case itself. When set_pcie_speed.sh is in TEST_PROGS, selftest harness will
execute also it leading to bwctrl selftest errors:
# selftests: pcie_bwctrl: set_pcie_speed.sh
# cat: /cur_state: No such file or directory
not ok 2 selftests: pcie_bwctrl: set_pcie_speed.sh # exit=1
Place set_pcie_speed.sh into TEST_FILES instead to have it included into
installed test files but not execute it from the test harness.
Fixes: df6f8c4d72 ("selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to TEST_PROGS")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250417124529.11391-1-ilpo.jarvinen@linux.intel.com
Add a 5-byte NOP uprobe trigger benchmark (x86_64 specific) to measure
uprobes/uretprobes on top of NOP5 instructions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20250414083647.1234007-2-jolsa@kernel.org
Current release - regressions:
- 2 fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth: hibmcge: fixes for link and MTU handling, pause frames etc.
- eth: igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EObk
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth, CAN and Netfilter.
Current release - regressions:
- two fixes for the netdev per-instance locking
- batman-adv: fix double-hold of meshif when getting enabled
Current release - new code bugs:
- Bluetooth: increment TX timestamping tskey always for stream
sockets
- wifi: static analysis and build fixes for the new Intel sub-driver
Previous releases - regressions:
- net: fib_rules: fix iif / oif matching on L3 master (VRF) device
- ipv6: add exception routes to GC list in rt6_insert_exception()
- netfilter: conntrack: fix erroneous removal of offload bit
- Bluetooth:
- fix sending MGMT_EV_DEVICE_FOUND for invalid address
- l2cap: process valid commands in too long frame
- btnxpuart: Revert baudrate change in nxp_shutdown
Previous releases - always broken:
- ethtool: fix memory corruption during SFP FW flashing
- eth:
- hibmcge: fixes for link and MTU handling, pause frames etc
- igc: fixes for PTM (PCIe timestamping)
- dsa: b53: enable BPDU reception for management port
Misc:
- fixes for Netlink protocol schemas"
* tag 'net-6.15-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
net: ethernet: mtk_eth_soc: revise QDMA packet scheduler settings
net: ethernet: mtk_eth_soc: correct the max weight of the queue limit for 100Mbps
net: ethernet: mtk_eth_soc: reapply mdc divider on reset
net: ti: icss-iep: Fix possible NULL pointer dereference for perout request
net: ti: icssg-prueth: Fix possible NULL pointer dereference inside emac_xmit_xdp_frame()
net: ti: icssg-prueth: Fix kernel warning while bringing down network interface
netfilter: conntrack: fix erronous removal of offload bit
net: don't try to ops lock uninitialized devs
ptp: ocp: fix start time alignment in ptp_ocp_signal_set
net: dsa: avoid refcount warnings when ds->ops->tag_8021q_vlan_del() fails
net: dsa: free routing table on probe failure
net: dsa: clean up FDB, MDB, VLAN entries on unbind
net: dsa: mv88e6xxx: fix -ENOENT when deleting VLANs and MST is unsupported
net: dsa: mv88e6xxx: avoid unregistering devlink regions which were never registered
net: txgbe: fix memory leak in txgbe_probe() error path
net: bridge: switchdev: do not notify new brentries as changed
net: b53: enable BPDU reception for management port
netlink: specs: rt-neigh: prefix struct nfmsg members with ndm
netlink: specs: rt-link: adjust mctp attribute naming
netlink: specs: rtnetlink: attribute naming corrections
...
Until we are certain that existing classful qdiscs work with bpf qdisc,
make sure we don't allow attaching a bpf qdisc to non root. Meanwhile,
attaching to mq is allowed.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-11-ameryhung@gmail.com
This test implements a more sophisticated qdisc using bpf. The bpf fair-
queueing (fq) qdisc gives each flow an equal chance to transmit data. It
also respects the timestamp of skb for rate limiting.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-10-ameryhung@gmail.com
This selftest includes a bare minimum fifo qdisc, which simply enqueues
sk_buffs into the back of a bpf list and dequeues from the front of the
list.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://patch.msgid.link/20250409214606.2000194-9-ameryhung@gmail.com
The ovpn-cli tool can be compiled and used as selftest for the ovpn
kernel module.
[NOTE: it depends on libmedtls for decoding base64-encoded keys]
ovpn-cli implements the netlink and RTNL APIs and can thus be integrated
in any script for more automated testing.
Along with the tool, a bunch of scripts are provided that perform basic
functionality tests by means of network namespaces.
These scripts take part to the kselftest automation.
The output of the scripts, which will appear in the kselftest
reports, is a list of steps performed by the scripts plus some
output coming from the execution of `ping`, `iperf` and `ovpn-cli`
itself.
In general it is useful only in case of failure, in order to
understand which step has failed and why.
Please note: since peer sockets are tied to the userspace
process that created them (i.e. exiting the process will result
in closing the socket), every run of ovpn-cli that created
one will go to background and enter pause(), waiting for the
signal which will allow it to terminate.
Termination is accomplished at the end of each script by
issuing a killall command.
Cc: linux-kselftest@vger.kernel.org
Cc: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20250415-b4-ovpn-v26-23-577f6097b964@openvpn.net
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
or aren't considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaABuqgAKCRDdBJ7gKXxA
jkZ7AQCkxrzIxZs7uUcHZNIGpNhbhg0Dl07j6txgf7piCBSk4wD+LX6skmC2CXLF
QWDhw1+dKHY/Ha0TSQkXUlMTjAP1mA4=
=3vRc
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"31 hotfixes.
9 are cc:stable and the remainder address post-6.15 issues or aren't
considered necessary for -stable kernels.
22 patches are for MM, 9 are otherwise"
* tag 'mm-hotfixes-stable-2025-04-16-19-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
MAINTAINERS: update HUGETLB reviewers
mm: fix apply_to_existing_page_range()
selftests/mm: fix compiler -Wmaybe-uninitialized warning
alloc_tag: handle incomplete bulk allocations in vm_module_tags_populate
mailmap: add entry for Jean-Michel Hautbois
mm: (un)track_pfn_copy() fix + doc improvements
mm: fix filemap_get_folios_contig returning batches of identical folios
mm/hugetlb: add a line break at the end of the format string
selftests: mincore: fix tmpfs mincore test failure
mm/hugetlb: fix set_max_huge_pages() when there are surplus pages
mm/cma: report base address of single range correctly
mm: page_alloc: speed up fallbacks in rmqueue_bulk()
kunit: slub: add module description
mm/kasan: add module decription
ucs2_string: add module description
zlib: add module description
fpga: tests: add module descriptions
samples/livepatch: add module descriptions
ASN.1: add module description
mm/vma: add give_up_on_oom option on modify/merge, use in uffd release
...
Add one simple fault inject target, and verify if an application using ublk
device sees an I/O error quickly after the ublk server dies.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250416035444.99569-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
test may exit early because of missing program or not having required
feature before calling _prep_test(), then $UBLK_TMP isn't cleaned.
Fix it by moving creating $UBLK_TMP into _prep_test(), any resources
created since _prep_test() will be cleaned by _cleanup_test().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-14-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Support target specific command line for making related command line code
handling more readable & clean.
Also helps for adding new features.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In NUMA machine, ublk IO performance is very sensitive with queue
pthread's affinity setting.
Retrieve queue's affinity and select the 1st cpu as queue thread's sched
affinity, and it is observed that single cpu task affinity can get
stable & good performance if client application is put on proper cpu.
Dump this info when adding one ublk device. Use shmem to communicate
queue's tid between parent and daemon.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Detach ublk daemon from the starting process completely by double-fork and
clearing its process group, so that `_add_ublk_dev` can return from sub-shell.
Then it is more friendly for writing shell test script for adding/recovering
ublk device.
Prepare for running ublk test in parallel.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add io_uring UAPI header so that ublk can work with latest uapi
definition.
Fix the following build failure:
stripe.c: In function ‘stripe_to_uring_op’:
stripe.c:120:29: error: ‘IORING_OP_READV_FIXED’ undeclared (first use in this function); did you mean ‘IORING_OP_READ_FIXED’?
120 | return zc ? IORING_OP_READV_FIXED : IORING_OP_READV;
| ^~~~~~~~~~~~~~~~~~~~~
| IORING_OP_READ_FIXED
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Fixes: 57ed58c132 ("selftests: ublk: enable zero copy for stripe target")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Bounds check for iterator variable `i` is missed, so add it and fix
ublk_find_tgt().
Cc: Johannes Thumshirn <Johannes.Thumshirn@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250412023035.2649275-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bash and dash evaluate variables differently.
dash will evaluate '\\' every time it is read whereas bash does not.
TEST_STRING="$TEST_STRING \\$i"
echo $TEST_STRING
With i=123
On bash, that will print "\123"
but on dash, that will print the escape sequence of \123 as the \ will be
interpreted again in the echo.
The dynevent_limitations.tc test created a very large list of arguments to
test the maximum number of arguments to pass to the dynamic events file.
It had a loop of:
TEST_STRING=$1
# Acceptable
for i in `seq 1 $MAX_ARGS`; do
TEST_STRING="$TEST_STRING \\$i"
done
echo "$TEST_STRING" >> dynamic_events
This worked fine on bash, but when run on dash it failed.
This was due to dash interpreting the "\\$i" twice. Once when it was
assigned to TEST_STRING and a second time with the echo $TEST_STRING.
bash does not process the backslash more than the first time.
To solve this, assign a double backslash to a variable "bs" and then echo
it to "ts". If "ts" changes, it is dash, if not, it is bash. Then update
"bs" accordingly, and use that to assign TEST_STRING.
Now this could possibly just check if "$BASH" is defined or not, but this
is testing if the issue exists and not just which shell is being used.
Link: https://lore.kernel.org/r/20250414210900.4de5e8b9@gandalf.local.home
Fixes: 581a7b26ab ("selftests/ftrace: Add dynamic events argument limitation test case")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/350786cc-9e40-4396-ab95-4f10d69122fb@sirena.org.uk/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The 32-bit sparc configuration (--arch sparc) crashes on
the kunit_fault_test. It's known that some architectures don't handle
deliberate segfaults in kernel mode well, so there's a config switch to
disable tests which rely upon it by default.
Use this for the sparc config, making sure the default config for it
passes.
Link: https://lore.kernel.org/r/20250416093826.1550040-1-davidgow@google.com
Fixes: 87c9c16317 ("kunit: tool: add support for QEMU")
Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Tested-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The configuration generated by kunit ends up with a 32bit configuration.
A new kunit configuration for 64bit is to be added.
To make the difference clearer spell out the variant in the kunit
reference config.
Link: https://lore.kernel.org/r/20250415-kunit-qemu-sparc64-v1-1-253906f61102@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The extended general-purpose registers for APX may contain random data,
which is currently assumed by the xstate testing framework. This allows
the testing of the new userspace feature using the common test code.
Invoke the test entry function from apx.c after enumerating the
state component and adding it to the support list
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20250416021720.12305-6-chang.seok.bae@intel.com
Add tests for FIB rules that match on iif / oif being a VRF device. Test
both good and bad flows.
With previous patch ("net: fib_rules: Fix iif / oif matching on L3
master device"):
# ./fib_rule_tests.sh
[...]
Tests passed: 328
Tests failed: 0
Without it:
# ./fib_rule_tests.sh
[...]
Tests passed: 324
Tests failed: 4
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enabling a (modular) test should not silently enable additional kernel
functionality, as that may increase the attack vector of a product.
Fix this by making PRIME_NUMBERS_KUNIT_TEST depend on PRIME_NUMBERS
instead of selecting it.
After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build
modules for all appropriate tests for ones system, without pulling in
extra unwanted functionality, while still allowing a tester to manually
enable PRIME_NUMBERS and this test suite on a system where PRIME_NUMBERS
is not enabled by default. Resurrect CONFIG_PRIME_NUMBERS=m in
tools/testing/selftests/lib/config for the latter use case.
Fixes: 313b38a6ec ("lib/prime_numbers: convert self-test to KUnit")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/40f8a40eef4930d3ac9febd205bc171eb04e171c.1744641237.git.geert@linux-m68k.org
Signed-off-by: Kees Cook <kees@kernel.org>
Add basic configs to run kunit tests on some more PowerPC variants.
Link: https://lore.kernel.org/r/20250415-kunit-ppc-v1-2-f5a170264147@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The configuration generated by kunit ends up with big endian.
A new kunit configuration for little endian is to be added.
To make the difference clearer spell out the endianness in the kunit
reference config.
Link: https://lore.kernel.org/r/20250415-kunit-ppc-v1-1-f5a170264147@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To implement custom scripting around kunit.py it is useful to get a list of
available architectures. While it is possible to manually inspect
tools/testing/kunit/qemu_configs/, this is annoying to implement and
introduces a dependency on a kunit.py implementation detail.
Introduce 'kunit.py run --arch help' which lists all known architectures
in an easy to parse list. This is equivalent on how QEMU implements
listing of possible argument values.
Link: https://lore.kernel.org/r/20250415-kunit-list-v2-1-aa452cd317ae@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
mptcp_connect.c is a startup tutorial of MPTCP programming, however
there is a lack of ai_protocol(IPPROTO_MPTCP) usage. Add comment for
getaddrinfo MPTCP support.
This patch first uses IPPROTO_MPTCP to get addrinfo, and if glibc
version is too old, it falls back to using IPPROTO_TCP.
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-8-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It's strange that 'nlh' variable is set to NULL in get_mptcpinfo() and then
this NULL pointer is passed to recv_nlmsg(). In fact, this variable should
be defined in recv_nlmsg(), not get_mptcpinfo().
So this patch drops this useless 'nlh' parameter of recv_nlmsg() and define
'nlh' variable in recv_nlmsg().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-7-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The parent commit adds this new counter, incremented when receiving a
connection request, if the PM didn't allow the creation of new subflows.
Most of the time, it is then kept at 0, except when the PM limits cause
the receiver side to reject new MPJoin connections. This is the case in
the following tests:
- single subflow, limited by server
- multiple subflows, limited by server
- subflows limited by server w cookies
- userspace pm type rejects join
- userspace pm type prevents mp_prio
Simply set join_syn_rej=1 when checking the MPJoin counters for these
tests.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250413-net-next-mptcp-sched-mib-sft-misc-v2-6-0f83a4350150@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kernel doc for gpio-aggregator configfs interface, which was recently
added, states that users should not be able to create an aggregator with a
name prefixed by "_sysfs" via configfs. However, it was found that this
guard does not function as expected (thanks to Dan Carpenter for
identifying and fixing the issue).
Add a test case to verify the guard.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250412150119.1461023-1-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
The default SH kunit configuration sets CONFIG_CMDLINE_OVERWRITE which
completely disregards the cmdline passed from the bootloader/QEMU in favor
of the builtin CONFIG_CMDLINE.
However the kunit tool needs to pass arguments to the in-kernel kunit core,
for filters and other runtime parameters.
Enable CONFIG_CMDLINE_EXTEND instead, so kunit arguments are respected.
Link: https://lore.kernel.org/r/20250407-kunit-sh-v1-1-f5432a54cf2f@linutronix.de
Fixes: 8110a3cab0 ("kunit: tool: Add support for SH under QEMU")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Enable CONFIG_INIT_STACK_ALL_PATTERN in all_tests.config. This helps
to detect use of uninitialized local variables.
This option found an uninitialized data bug in the cs_dsp test.
Link: https://lore.kernel.org/r/20250411095904.1593224-1-rf@opensource.cirrus.com
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a sysctl test that uses the new u8 test ctl files in a created by
the sysctl test module. Check that the u8 proc file that is valid is
created and that there are two messages in dmesg for the files that were
out of range.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Add CONFIG_I2C and CONFIG_SND_SOC_CS35L56_I2C to all_tests.config
so that Cirrus Logic modules with KUnit tests will be built.
The CS35L56 driver doesn't currently have any KUnit tests itself,
but it enables two other libraries that have KUnit tests:
cs_dsp and cs-amp-lib.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250411123608.1676462-2-rf@opensource.cirrus.com
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add missing stubs for mutex and free_reserved_area() to memblock tests
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmf7kxgQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kbv4B/0XhZGFhmZt7yXlOU6ywPB94nLgH7lWkbHe
Kxca0M7/77Vd19nRaHq9zIO2SQkkz3mKQNuSTsBLZLUrRi/oivWN9jFlaXMytLcT
v2XeX7HCX4FqSAKbA0fu130/qIyHJAyy+cUIuAhy/043eE7mtj99yCHkwza7S4US
gL1kFNBH9hLuLhm7Pnq7yBK6Wx2kuFhMwG6Deb6AWrSJ1pfv/wMfzwXfBiZ2oy/8
CfDdeSXiIKoj9CDMnwrbVADZxVFvCC9YooatQoJ/Y+35MwN5XQyJFtS0rXvEHkvf
jS+HQCUXKxoVeZKVhKnauZ8h1NgLzyhSvUB9iPBo/fdyGDXpU8OO
=DpcO
-----END PGP SIGNATURE-----
Merge tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix build of memblock test.
Add missing stubs for mutex and free_reserved_area() to memblock
tests"
* tag 'fixes-2025-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock tests: Fix mutex related build error
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not defined.
Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s" for
dynamic size strings even though the user space exported arguments had
only __get_str() macro that provided just a nul terminated string. This
was fixed so that user space could parse this properly. But the reason
that it had "%.*s" was because internally it provided the maximum size of
the string as one of the arguments. The fix that replaced "%.*s" with "%s"
caused the trace output (when the kernel reads the event) to write
"(efault)" as it would now read the length of the string as "%s".
As the string provided is always nul terminated, there's no reason for the
internal code to use "%.*s" anyway. Just remove the length argument to
match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a way
to have a single ftrace_ops registered with ftrace to determine what
functions will call the ftrace_ops callback. More than one user of
function graph can register a ftrace_ops with it. The function graph
infrastructure will then add this ftrace_ops as a subops with the main
ftrace_ops it registers with ftrace. This is because the functions will
always call the function graph callback which in turn calls the subops
ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will update
the main ftrace_ops hash to include the functions it wants. This is the
logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" were all the
functions in the filter_hash but not in the notrace_hash are attached by
ftrace. The original logic would have the main ftrace_ops filter_hash be a
union of all the subops filter_hashes and the main notrace_hash would be a
intersect of all the subops filter hashes. But this was incorrect because
the notrace hash depends on the filter_hash it is associated to and not
the union of all filter_hashes.
Instead, when a subops is added, just include all the functions of the
subops hash that are in its filter_hash but not in its notrace_hash. The
main subops hash should not use its notrace hash, unless all of its subops
hashes have an empty filter_hash (which means to attach to all functions),
and then, and only then, the main ftrace_ops notrace hash can be the
intersect of all the subops hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and called
print_graph_retval() and also printed a newline. The print_graph_retval()
also prints a newline which caused blank lines to be printed in the
function graph tracer when retval was added. This caused one of the
selftests to fail if retvals were enabled. Instead remove the new line
output from print_graph_retval() and have the callers always print the
new line so that it doesn't have to do special logic if it calls
print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the link
list it references the next entry, which is the list head and causes an
out-of-bound memory access.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ/rXQxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoj7AQC0C2awpJSUIRj91qjPtMYuNUE3AVpB
EEZEkt19LfE//gEA1fOx3Cors/LrY9dthn/3LMKL23vo9c4i0ffhs2X+1gE=
=XJL5
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Hide get_vm_area() from MMUless builds
The function get_vm_area() is not defined when CONFIG_MMU is not
defined. Hide that function within #ifdef CONFIG_MMU.
- Fix output of synthetic events when they have dynamic strings
The print fmt of the synthetic event's format file use to have "%.*s"
for dynamic size strings even though the user space exported
arguments had only __get_str() macro that provided just a nul
terminated string. This was fixed so that user space could parse this
properly.
But the reason that it had "%.*s" was because internally it provided
the maximum size of the string as one of the arguments. The fix that
replaced "%.*s" with "%s" caused the trace output (when the kernel
reads the event) to write "(efault)" as it would now read the length
of the string as "%s".
As the string provided is always nul terminated, there's no reason
for the internal code to use "%.*s" anyway. Just remove the length
argument to match the "%s" that is now in the format.
- Fix the ftrace subops hash logic of the manager ops hash
The function_graph uses the ftrace subops code. The subops code is a
way to have a single ftrace_ops registered with ftrace to determine
what functions will call the ftrace_ops callback. More than one user
of function graph can register a ftrace_ops with it. The function
graph infrastructure will then add this ftrace_ops as a subops with
the main ftrace_ops it registers with ftrace. This is because the
functions will always call the function graph callback which in turn
calls the subops ftrace_ops callbacks.
The main ftrace_ops must add a callback to all the functions that the
subops want a callback from. When a subops is registered, it will
update the main ftrace_ops hash to include the functions it wants.
This is the logic that was broken.
The ftrace_ops hash has a "filter_hash" and a "notrace_hash" where
all the functions in the filter_hash but not in the notrace_hash are
attached by ftrace. The original logic would have the main ftrace_ops
filter_hash be a union of all the subops filter_hashes and the main
notrace_hash would be a intersect of all the subops filter hashes.
But this was incorrect because the notrace hash depends on the
filter_hash it is associated to and not the union of all
filter_hashes.
Instead, when a subops is added, just include all the functions of
the subops hash that are in its filter_hash but not in its
notrace_hash. The main subops hash should not use its notrace hash,
unless all of its subops hashes have an empty filter_hash (which
means to attach to all functions), and then, and only then, the main
ftrace_ops notrace hash can be the intersect of all the subops
hashes.
This not only fixes the bug, but also simplifies the code.
- Add a selftest to better test the subops filtering
Add a selftest that would catch the bug fixed by the above change.
- Fix extra newline printed in function tracing with retval
The function parameter code changed the output logic slightly and
called print_graph_retval() and also printed a newline. The
print_graph_retval() also prints a newline which caused blank lines
to be printed in the function graph tracer when retval was added.
This caused one of the selftests to fail if retvals were enabled.
Instead remove the new line output from print_graph_retval() and have
the callers always print the new line so that it doesn't have to do
special logic if it calls print_graph_retval() or not.
- Fix out-of-bound memory access in the runtime verifier
When rv_is_container_monitor() is called on the last entry on the
link list it references the next entry, which is the list head and
causes an out-of-bound memory access.
* tag 'trace-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix out-of-bound memory access in rv_is_container_monitor()
ftrace: Do not have print_graph_retval() add a newline
tracing/selftest: Add test to better test subops filtering of function graph
ftrace: Fix accounting of subop hashes
ftrace: Properly merge notrace hashes
tracing: Do not add length to print format in synthetic events
tracing: Hide get_vm_area() from MMUless builds
-----BEGIN PGP SIGNATURE-----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=Mezb
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Followup fixes for resilient spinlock (Kumar Kartikeya Dwivedi):
- Make res_spin_lock test less verbose, since it was spamming BPF
CI on failure, and make the check for AA deadlock stronger
- Fix rebasing mistake and use architecture provided
res_smp_cond_load_acquire
- Convert BPF maps (queue_stack and ringbuf) to resilient spinlock
to address long standing syzbot reports
- Make sure that classic BPF load instruction from SKF_[NET|LL]_OFF
offsets works when skb is fragmeneted (Willem de Bruijn)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Convert ringbuf map to rqspinlock
bpf: Convert queue_stack map to rqspinlock
bpf: Use architecture provided res_smp_cond_load_acquire
selftests/bpf: Make res_spin_lock AA test condition stronger
selftests/net: test sk_filter support for SKF_NET_OFF on frags
bpf: support SKF_NET_OFF and SKF_LL_OFF on skb frags
selftests/bpf: Make res_spin_lock test less verbose
Following build warning comes up for cow test as 'transferred' variable has
not been initialized. Fix the warning via zero init for the variable.
CC cow
cow.c: In function `do_test_vmsplice_in_parent':
cow.c:365:61: warning: `transferred' may be used uninitialized [-Wmaybe-uninitialized]
365 | cur = read(fds[0], new + total, transferred - total);
| ~~~~~~~~~~~~^~~~~~~
cow.c:296:29: note: `transferred' was declared here
296 | ssize_t cur, total, transferred;
| ^~~~~~~~~~~
CC compaction_test
CC gup_longterm
Link: https://lkml.kernel.org/r/20250409095006.1422620-1-anshuman.khandual@arm.com
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When running mincore test cases, I encountered the following failures:
"
mincore_selftest.c:359:check_tmpfs_mmap:Expected ra_pages (511) == 0 (0)
mincore_selftest.c:360:check_tmpfs_mmap:Read-ahead pages found in memory
check_tmpfs_mmap: Test terminated by assertion
FAIL global.check_tmpfs_mmap
not ok 5 global.check_tmpfs_mmap
FAILED: 4 / 5 tests passed
"
The reason for the test case failure is that my system automatically enabled
tmpfs large folio allocation by adding the 'transparent_hugepage_tmpfs=always'
cmdline. However, the test case still expects the tmpfs mounted on /dev/shm to
allocate small folios, which leads to assertion failures when verifying readahead
pages.
As discussed with David, there's no reason to continue checking the readahead
logic for tmpfs. Drop it to fix this issue.
Link: https://lkml.kernel.org/r/9a00856cc6a8b4e46f4ab8b1af11ce5fc1a31851.1744025467.git.baolin.wang@linux.alibaba.com
Fixes: d635ccdb43 ("mm: shmem: add a kernel command line to change the default huge policy for tmpfs")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Barry Song <21cnbao@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently if the filesystem for the cgroups version it wants to use is not
mounted charge_reserved_hugetlb.sh and hugetlb_reparenting_test.sh tests
will attempt to mount it on the hard coded path /dev/cgroup/memory,
deleting that directory when the test finishes. This will fail if there
is not a preexisting directory at that path, and since the directory is
deleted subsequent runs of the test will fail. Instead of relying on this
hard coded directory name use mktemp to generate a temporary directory to
use as a mountpoint, fixing both the assumption and the disruption caused
by deleting a preexisting directory.
This means that if the relevant cgroup filesystem is not already mounted
then we rely on having coreutils (which provides mktemp) installed. I
suspect that many current users are relying on having things automounted
by default, and given that the script relies on bash it's probably not an
unreasonable requirement.
Link: https://lkml.kernel.org/r/20250404-kselftest-mm-cgroup2-detection-v1-1-3dba6d32ba8c@kernel.org
Fixes: 209376ed2a ("selftests/vm: make charge_reserved_hugetlb.sh work with existing cgroup setting")
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Aishwarya TCV <aishwarya.tcv@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On 32-bit, we can't use %lu to print a size_t variable and gcc warns us
about it. Shame it doesn't warn about it on 64-bit.
Link: https://lkml.kernel.org/r/20250403003311.359917-1-Liam.Howlett@oracle.com
Fixes: cc86e0c2f3 ("radix tree test suite: add support for slab bulk APIs")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a selftest that checks whether the kernel can successfully echo a
big tc filter, to test the fix introduced in commit:
369609fc62 ("tc: Ensure we have enough buffer space when sending filter netlink notifications")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250410104322.214620-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A bug was discovered that showed the accounting of the subops of the
ftrace_ops filtering was incorrect. Add a new test to better test the
filtering.
This test creates two instances, where it will add various filters to both
the set_ftrace_filter and the set_ftrace_notrace files and enable
function_graph. Then it looks into the enabled_functions file to make sure
that the filters are behaving correctly.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Andy Chiu <andybnac@gmail.com>
Link: https://lore.kernel.org/20250409152720.380778379@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The torture.sh --do-rt command-line parameter is intended to mimic -rt
kernels. Now that CONFIG_PREEMPT_RT is upstream, this commit makes this
mimicking more precise.
Note that testing of RCU priority boosting is disabled in favor
of forward-progress testing of RCU callbacks. If it turns out to be
possible to make kernels built with CONFIG_PREEMPT_RT=y to tolerate
testing of both, both will be enabled.
[ paulmck: Apply Sebastian Siewior feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Add audit.thread tests to check that the PID tied to a domain is not a
thread ID but the thread group ID. These new tests would not pass
without the previous TGID fix.
Extend matches_log_domain_allocated() to check against the PID that
created the domain.
Test coverage for security/landlock is 93.6% of 1524 lines according to
gcc/gcov-14.
Cc: Christian Brauner <brauner@kernel.org>
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250410171725.1265860-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The audit fixture needlessly stores and manages domain_stack. Move it
to the audit.layers tests. This will be useful to reuse the audit
fixture with the next patch.
Cc: Günther Noack <gnoack@google.com>
Link: https://lore.kernel.org/r/20250410171725.1265860-2-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The rtnetlink family names are set to rt-$name within the YAML
but the files are called rt_$name. C codegen assumes that the
generated file name will match the family. The use of dashes
is in line with our general expectation that name properties
in the spec use dashes not underscores (even tho, as Donald
points out most genl families use underscores in the name).
We have 3 un-ideal options to choose from:
- accept the slight inconsistency with old families using _, or
- accept the slight annoyance with all languages having to do s/-/_/
when looking up family ID, or
- accept the inconsistency with all name properties in new YAML spec
being separated with - and just the family name always using _.
Pick option 1 and rename the rtnl spec files.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For bnxt when the agg ring is used then tcp-data-split is automatically
reported to be enabled, but __net_mp_open_rxq() requires tcp-data-split
to be explicitly enabled by the user.
Enable tcp-data-split explicitly in io_uring zc rx selftest.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250409163153.2747918-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The include of sys/io.h is not necessary anymore since
commit 67eb617a8e ("selftests/nolibc: simplify call to ioperm").
It's existence is also problematic as the header does not exist on all
architectures.
Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250324-nolibc-ioperm-v1-1-8a7cfb2876ae@weissschuh.net
Let's make sure that we see a EDEADLK and ETIMEDOUT whenever checking
for the AA tests (in case of simple AA and AA after exhausting 31
entries).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250410170023.2670683-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce tail adjustment functionality in xskxceiver using
bpf_xdp_adjust_tail(). Add `xsk_xdp_adjust_tail` to modify packet sizes
and drop unmodified packets. Implement `is_adjust_tail_supported` to check
helper availability. Develop packet resizing tests, including shrinking
and growing scenarios, with functions for both single-buffer and
multi-buffer cases. Update the test framework to handle various scenarios
and adjust MTU settings. These changes enhance the testing of packet tail
adjustments, improving AF_XDP framework reliability.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250410033116.173617-3-tushar.vyavahare@intel.com
Add pkt_stream_replace_ifobject function to replace the packet stream for
a given ifobject.
Enable separate TX and RX packet replacement, allowing RX side packet
length adjustments using bpf_xdp_adjust_tail() in the upcoming patch.
Currently, pkt_stream_replace() works on both TX and RX packet streams,
and this new function provides the ability to modify one of them.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250410033116.173617-2-tushar.vyavahare@intel.com
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink().
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr().
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=wkGz
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- core: hold instance lock during NETDEV_CHANGE
- rtnetlink: fix bad unlock balance in do_setlink()
- ipv6:
- fix null-ptr-deref in addrconf_add_ifaddr()
- align behavior across nexthops during path selection
Previous releases - regressions:
- sctp: prevent transport UaF in sendmsg
- mptcp: only inc MPJoinAckHMacFailure for HMAC failures
Previous releases - always broken:
- sched:
- make ->qlen_notify() idempotent
- ensure sufficient space when sending filter netlink notifications
- sch_sfq: really don't allow 1 packet limit
- netfilter: fix incorrect avx2 match of 5th field octet
- tls: explicitly disallow disconnect
- eth: octeontx2-pf: fix VF root node parent queue priority"
* tag 'net-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
ethtool: cmis_cdb: Fix incorrect read / write length extension
selftests: netfilter: add test case for recent mismatch bug
nft_set_pipapo: fix incorrect avx2 match of 5th field octet
net: ppp: Add bound checking for skb data on ppp_sync_txmung
net: Fix null-ptr-deref by sock_lock_init_class_and_name() and rmmod.
ipv6: Align behavior across nexthops during path selection
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
net: phy: move phy_link_change() prior to mdio_bus_phy_may_suspend()
selftests/tc-testing: sfq: check that a derived limit of 1 is rejected
net_sched: sch_sfq: move the limit validation
net_sched: sch_sfq: use a temporary work area for validating configuration
net: libwx: handle page_pool_dev_alloc_pages error
selftests: mptcp: validate MPJoin HMacFailure counters
mptcp: only inc MPJoinAckHMacFailure for HMAC failures
rtnetlink: Fix bad unlock balance in do_setlink().
net: ethtool: Don't call .cleanup_data when prepare_data fails
tc: Ensure we have enough buffer space when sending filter netlink notifications
net: libwx: Fix the wrong Rx descriptor field
octeontx2-pf: qos: fix VF root node parent queue index
selftests: tls: check that disconnect does nothing
...
Without 'nft_set_pipapo: fix incorrect avx2 match of 5th field octet"
this fails:
TEST: reported issues
Add two elements, flush, re-add 1s [ OK ]
net,mac with reload 0s [ OK ]
net,port,proto 3s [ OK ]
avx2 false match 0s [FAIL]
False match for fe80:dead:01fe:0a02:0b03:6007:8009:a001
Other tests do not detect the kernel bug as they only alter parts in
the /64 netmask.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a self test which exercises both the kexec-jump facility, and the
kexec exception handling.
Invoke a trivial payload which just does an int3 and returns,
flip-flopping its entry point for the next invocation between two
implementations of the same thing.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250326142404.256980-5-dwmw2@infradead.org
Add a test case to verify the atomic update of existing elements in the
htab of maps. The test proceeds in three steps:
1) fill the outer map with keys in the range [0, 8]
For each inner array map, the value of its first element is set as the
key used to lookup the inner map.
2) create 16 threads to lookup these keys concurrently
Each lookup thread first lookups the inner map, then it checks whether
the first value of the inner array map is the same as the key used to
lookup the inner map.
3) create 8 threads to overwrite these keys concurrently
Each update thread first creates an inner array, it sets the first value
of the array to the key used to update the outer map, then it uses the
key and the inner map to update the outer map.
Without atomic update support, the lookup operation may return -ENOENT
during the lookup of outer map, or return -EINVAL during the comparison
of the first value in the inner map and the key used for inner map, and
the test will fail. After the atomic update change, both the lookup and
the comparison will succeed.
Given that the update of outer map is slow, the test case sets the loop
number for each thread as 5 to reduce the total running time. However,
the loop number could also be adjusted through FD_HTAB_LOOP_NR
environment variable.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250401062250.543403-7-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Verify that a classic BPF linux socket filter correctly matches
packet contents. Including when accessing contents in an
skb_frag.
1. Open a SOCK_RAW socket with a classic BPF filter on UDP dport 8000.
2. Open a tap device with IFF_NAPI_FRAGS to inject skbs with frags.
3. Send a packet for which the UDP header is in frag[0].
4. Receive this packet to demonstrate that the socket accepted it.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20250408132833.195491-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add TCP+sockmap-based benchmark.
Since sockmap's own update and delete operations are generally less
critical, the performance of the fast forwarding framework built upon
it is the key aspect.
Also with cgset/cgexec, we can observe the behavior of sockmap under
memory pressure.
The benchmark can be run with:
'''
./bench sockmap -c 2 -p 1 -a --rx-verdict-ingress
'''
In the future, we plan to move socket_helpers.h out of the prog_tests
directory to make it accessible for the benchmark. This will enable
better support for various socket types.
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://lore.kernel.org/r/20250407142234.47591-5-jiayuan.chen@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For systems with missing iptables-legacy tool this selftest fails.
Add check to find if iptables-legacy tool is available and skip the
test if the tool is missing.
Fixes: de9c8d848d ("selftests/bpf: S/iptables/iptables-legacy/ in the bpf_nf and xdp_synproxy test")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250409095633.33653-1-skb99@linux.ibm.com
Add selftests checking that line and func info retrieved by newly added
libbpf APIs are the same as returned by kernel via bpf_prog_get_info_by_fd.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250408234417.452565-3-mykyta.yatsenko5@gmail.com
Extend commit e3c9abd0d1 ("selftests/bpf: Implement setting global
variables in veristat") to support applying presets to members of
the global structs or unions in veristat.
For example:
```
./veristat set_global_vars.bpf.o -G "union1.struct3.var_u8_h = 0xBB"
```
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250408104544.140317-1-mykyta.yatsenko5@gmail.com
Fixes tpm2, futex, and mincore tests. Creates a dedicated .gitignore
for tpm2
Details:
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
selftests/futex: futex_waitv wouldblock test should fail
selftests: tpm2: create a dedicated .gitignore
selftests/mincore: Allow read-ahead pages to reach the end of the file
-----BEGIN PGP SIGNATURE-----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=KUYx
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
- Fixes tpm2, futex, and mincore tests
- Create a dedicated .gitignore for tpm2 tests
* tag 'linux_kselftest-fixes-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/mincore: Allow read-ahead pages to reach the end of the file
selftests/futex: futex_waitv wouldblock test should fail
selftests: tpm2: test_smoke: use POSIX-conformant expression operator
selftests: tpm2: create a dedicated .gitignore
Resolve minor fd leaks reported by cppcheck in lam.c.
Specifically, the 'file_fd' and 'fd' were not closed in do_uring()
and allocate_dsa_pasid() functions, respectively.
cppcheck output before this patch:
tools/testing/selftests/x86/lam.c:685:3: error: Resource leak: file_fd [resourceLeak]
tools/testing/selftests/x86/lam.c:693:3: error: Resource leak: file_fd [resourceLeak]
tools/testing/selftests/x86/lam.c:1195:2: error: Resource leak: fd [resourceLeak]
cppcheck output after this patch:
No resource leaks found
While this is a standalone test tool that doesn't really leak anything
in practice, as exit() cleans it up all, clean up resources nevertheless.
[ mingo: Updated the changelog. ]
Signed-off-by: Malaya Kumar Rout <malayarout91@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250409135341.28987-1-malayarout91@gmail.com
Add a set of tests for gpio-aggregator module. This test covers both
pre-existing new_device/delete_device interface and new configfs-based
interface.
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Link: https://lore.kernel.org/r/20250407043019.4105613-10-koichiro.den@canonical.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Because the limit is updated indirectly when other parameters are
updated, there are cases where even though the user requests a limit
of 2 it can actually be set to 1.
Add the following test cases to check that the kernel rejects them:
- limit 2 depth 1 flows 1
- limit 2 depth 1 divisor 1
Signed-off-by: Octavian Purdila <tavip@google.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes tool to report test count in case of a late test plan when tests
are specified before the test plan. Fixes spelling error in the commit
that went into 6.15-rc1.
-----BEGIN PGP SIGNATURE-----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=VdOJ
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
- Fix the tool to report test count in case of a late test plan when
tests are specified before the test plan
- Fix spelling error
* tag 'linux_kselftest-kunit-6.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: Spelling s/slowm/slow/
kunit: tool: fix count of tests if late test plan
The parent commit fixes an issue around these counters where one of them
-- MPJoinAckHMacFailure -- was wrongly incremented in some cases.
This makes sure the counter is always 0. It should be incremented only
in case of corruption, or a wrong implementation, which should not be
the case in these selftests.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250407-net-mptcp-hmac-failure-mib-v1-2-3c9ecd0a3a50@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Testcase should fail if -EWOULDBLOCK is not returned when expected value
differs from actual value from the waiter.
Link: https://lore.kernel.org/r/20250404221225.1596324-1-edliaw@google.com
Fixes: 9d57f7c797 ("selftests: futex: Test sys_futex_waitv() wouldblock")
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix test count with late test plan.
For example,
TAP version 13
ok 1 test1
1..4
Returns a count of 1 passed, 1 crashed (because it expects tests after
the test plan): returning the total count of 2 tests
Change this to be 1 passed, 1 error: total count of 1 test
Link: https://lore.kernel.org/r/20250319223351.1517262-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Use POSIX-conformant expression operator symbol '='.
The use of the non POSIX-conformant symbol '==' would work
in bash, but not in sh where the unexpected operator error
would result in test_smoke.sh being skipped.
Instead of changing the shebang to use bash, which may not be
available on all systems, use the POSIX-conformant expression
symbol '=' to test for equality.
Without this patch:
===================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# ./test_smoke.sh: 9: [: 2: unexpected operator
ok 1 selftests: tpm2: test_smoke.sh # SKIP
With this patch:
================
# make -j8 TARGETS=tpm2 kselftest
# selftests: tpm2: test_smoke.sh
# Ran 9 tests in 9.236s
ok 1 selftests: tpm2: test_smoke.sh
Link: https://lore.kernel.org/r/37ztyakgrrtgvec344mg7mspchwjpxxtsprtjidso3pwkmm4f4@awsa5mzgqmtb
Signed-off-by: Ahmed Salem <x0rw3ll@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The tpm2 selftests produce two logs: SpaceTest.log and
AsyncTest.log. Only SpaceTest.log was listed in selftests/.gitignore,
while AsyncTest.log remained untracked.
This change creates a dedicated .gitignore in the tpm2/ directory to
manage these entries, keeping tpm2-specific patterns isolated from
parent .gitignore.
Fixed white-space errors during commit
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250126195147.902608-1-khaledelnaggarlinux@gmail.com
Signed-off-by: Khaled Elnaggar <khaledelnaggarlinux@gmail.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
* Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
* Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
* Fix KVM guest driver to match PV CPUID hypercall ABI.
* Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
s390:
* Don't use %pK for debug printing and tracepoints.
x86:
* Use a separate subclass when acquiring KVM's per-CPU posted interrupts
wakeup lock in the scheduled out path, i.e. when adding a vCPU on
the list of vCPUs to wake, to workaround a false positive deadlock.
The schedule out code runs with a scheduler lock that the wakeup
handler takes in the opposite order; but it does so with IRQs disabled
and cannot run concurrently with a wakeup.
* Explicitly zero-initialize on-stack CPUID unions
* Allow building irqbypass.ko as as module when kvm.ko is a module
* Wrap relatively expensive sanity check with KVM_PROVE_MMU
* Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
* Add more scenarios to the MONITOR/MWAIT test.
* Add option to rseq test to override /dev/cpu_dma_latency
* Bring list of exit reasons up to date
* Cleanup Makefile to list once tests that are valid on all architectures
Other:
* Documentation fixes
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmf083IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN1dgf/QwfpZcHoMNQSnrc1jMy2LHrArln2
XfmsOGZTU7kyoLQsLWGAPNocOveGdiemTDsj5ZXoNMnqV8hCBr+tZuv2gWI1rr/o
kiGerdIgSZ9piTjBlJkVAaOzbWhg2DUnr7qVVzEzFY9+rPNyQ81vgAfU7h56KhYB
optecozmBrHHAxvQZwmPeL9UyPWFjOF1BY/8LTMx7X+aVuCX6qx1JqO3a3ylAw4J
tGXv6qFJfuCnu1d1b4X0ILce0iMUTOjQzvTcIm+BKjYycecl+3j1aczC/BOorIgc
mf0+XeauhcTduK73pirnvx2b05eOxntgkOpwJytO2RP6pE0uK+2Th/C3Qg==
=ba/Y
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA
- Use acquire/release semantics in the KVM FF-A proxy to avoid
reading a stale value for the FF-A version
- Fix KVM guest driver to match PV CPUID hypercall ABI
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work
s390:
- Don't use %pK for debug printing and tracepoints
x86:
- Use a separate subclass when acquiring KVM's per-CPU posted
interrupts wakeup lock in the scheduled out path, i.e. when adding
a vCPU on the list of vCPUs to wake, to workaround a false positive
deadlock. The schedule out code runs with a scheduler lock that the
wakeup handler takes in the opposite order; but it does so with
IRQs disabled and cannot run concurrently with a wakeup
- Explicitly zero-initialize on-stack CPUID unions
- Allow building irqbypass.ko as as module when kvm.ko is a module
- Wrap relatively expensive sanity check with KVM_PROVE_MMU
- Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
selftests:
- Add more scenarios to the MONITOR/MWAIT test
- Add option to rseq test to override /dev/cpu_dma_latency
- Bring list of exit reasons up to date
- Cleanup Makefile to list once tests that are valid on all
architectures
Other:
- Documentation fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (26 commits)
KVM: arm64: Use acquire/release to communicate FF-A version negotiation
KVM: arm64: selftests: Explicitly set the page attrs to Inner-Shareable
KVM: arm64: selftests: Introduce and use hardware-definition macros
KVM: VMX: Use separate subclasses for PI wakeup lock to squash false positive
KVM: VMX: Assert that IRQs are disabled when putting vCPU on PI wakeup list
KVM: x86: Explicitly zero-initialize on-stack CPUID unions
KVM: Allow building irqbypass.ko as as module when kvm.ko is a module
KVM: x86/mmu: Wrap sanity check on number of TDP MMU pages with KVM_PROVE_MMU
KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency
KVM: x86: Acquire SRCU in KVM_GET_MP_STATE to protect guest memory accesses
Documentation: kvm: remove KVM_CAP_MIPS_TE
Documentation: kvm: organize capabilities in the right section
Documentation: kvm: fix some definition lists
Documentation: kvm: drop "Capability" heading from capabilities
Documentation: kvm: give correct name for KVM_CAP_SPAPR_MULTITCE
Documentation: KVM: KVM_GET_SUPPORTED_CPUID now exposes TSC_DEADLINE
selftests: kvm: list once tests that are valid on all architectures
selftests: kvm: bring list of exit reasons up to date
selftests: kvm: revamp MONITOR/MWAIT tests
KVM: arm64: Don't translate FAR if invalid/unsafe
...
- A number of cpuset remote partition related fixes and cleanups along with
selftest updates.
- A change from this merge window made cgroup_rstat_updated_list() called
outside cgroup_rstat_lock leading to list corruptions. Fix it by
relocating the call inside the lock.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ/QMSQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGebUAP0bdg/hIX5OjhREbaDKWoUyAHnHqMdg3Dvngvhp
d9aOqQD/b1jdVfDINFtb2qjOpizPjyI0ycQxrr9K3DrSYmUAKAs=
=hFhq
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- A number of cpuset remote partition related fixes and cleanups along
with selftest updates.
- A change from this merge window made cgroup_rstat_updated_list()
called outside cgroup_rstat_lock leading to list corruptions. Fix it
by relocating the call inside the lock.
* tag 'cgroup-for-6.15-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup/cpuset: Fix race between newly created partition and dying one
cgroup: rstat: call cgroup_rstat_updated_list with cgroup_rstat_lock
selftest/cgroup: Add a remote partition transition test to test_cpuset_prs.sh
selftest/cgroup: Clean up and restructure test_cpuset_prs.sh
selftest/cgroup: Update test_cpuset_prs.sh to use | as effective CPUs and state separator
cgroup/cpuset: Remove unneeded goto in sched_partition_write() and rename it
cgroup/cpuset: Code cleanup and comment update
cgroup/cpuset: Don't allow creation of local partition over a remote one
cgroup/cpuset: Remove remote_partition_check() & make update_cpumasks_hier() handle remote partition
cgroup/cpuset: Fix error handling in remote_partition_disable()
cgroup/cpuset: Fix incorrect isolated_cpus update in update_parent_effective_cpumask()
Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ/P7QhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOKyoOAQCynFcS1dWuD27S+SdUREmBjMAoZo5M
zdsIvlPv9KLycgD/QX5lXjW3KIYY6jQ8vHUuLVwfDl/JEp4GJS9dLGU+agg=
=0R1T
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
Mixing different flavors of RCU readers is forbidden, for example, you
should not use srcu_read_lock() and srcu_read_lock_nmisafe() on the same
srcu_struct structure. There are checks for this, but these checks are
not tested on a regular basis. This commit therefore adds such tests
to srcu_lockdep.sh.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
The srcu_lockdep.sh currently blindly trusts the rcutorture SRCU-P
scenario to build its kernel with lockdep enabled. Of course, this
dependency might not be obvious to someone rebalancing SRCU scenarios.
This commit therefore adds code to srcu_lockdep.sh that verifies that
the .config file has lockdep enabled.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZ/RO9hccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFmRuAP0YajO4qHJe1vHtCkamuPnEY0Kp
E+t2TwPafPbrPdQ1PgEAq6lHuSdUnid1r/uhRKIT+ywW8tE97eNwQAa1LFma0Ac=
=d4G5
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.15-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64: First batch of fixes for 6.15
- Rework heuristics for resolving the fault IPA (HPFAR_EL2 v. re-walk
stage-1 page tables) to align with the architecture. This avoids
possibly taking an SEA at EL2 on the page table walk or using an
architecturally UNKNOWN fault IPA.
- Use acquire/release semantics in the KVM FF-A proxy to avoid reading
a stale value for the FF-A version.
- Fix KVM guest driver to match PV CPUID hypercall ABI.
- Use Inner Shareable Normal Write-Back mappings at stage-1 in KVM
selftests, which is the only memory type for which atomic
instructions are architecturally guaranteed to work.
Add a test case for FQ_CODEL with ETS parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-6-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case for FQ_CODEL with DRR parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-5-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case for FQ_CODEL with HFSC parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-4-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case for FQ_CODEL with QFQ parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-3-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a test case for FQ_CODEL with HTB parent to verify packet drop
behavior when the queue becomes empty. This helps ensure proper
notification mechanisms between qdiscs.
Note this is best-effort, it is hard to play with those parameters
perfectly to always trigger ->qlen_notify().
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20250403211636.166257-2-xiyou.wangcong@gmail.com
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hds.py has been testing 0(set_hds_thresh_zero()),
MAX(set_hds_thresh_max()), GT(set_hds_thresh_gt()) values for hds-thresh.
However if a hds-thresh value was already 0, set_hds_thresh_zero()
can't test properly.
So, it tests random value first and then tests 0, MAX, GT values.
Testing bnxt:
TAP version 13
1..13
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by
the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_random
ok 6 hds.set_hds_thresh_zero
ok 7 hds.set_hds_thresh_max
ok 8 hds.set_hds_thresh_gt
ok 9 hds.set_xdp
ok 10 hds.enabled_set_xdp
ok 11 hds.ioctl
ok 12 hds.ioctl_set_xdp
ok 13 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:1 error:0
Testing lo:
TAP version 13
1..13
ok 1 hds.get_hds # SKIP tcp-data-split not supported by device
ok 2 hds.get_hds_thresh # SKIP hds-thresh not supported by device
ok 3 hds.set_hds_disable # SKIP ring-set not supported by the device
ok 4 hds.set_hds_enable # SKIP ring-set not supported by the device
ok 5 hds.set_hds_thresh_random # SKIP hds-thresh not supported by
device
ok 6 hds.set_hds_thresh_zero # SKIP ring-set not supported by the
device
ok 7 hds.set_hds_thresh_max # SKIP hds-thresh not supported by
device
ok 8 hds.set_hds_thresh_gt # SKIP hds-thresh not supported by device
ok 9 hds.set_xdp # SKIP tcp-data-split not supported by device
ok 10 hds.enabled_set_xdp # SKIP tcp-data-split not supported by
device
ok 11 hds.ioctl # SKIP tcp-data-split not supported by device
ok 12 hds.ioctl_set_xdp # SKIP tcp-data-split not supported by
device
ok 13 hds.ioctl_enabled_set_xdp # SKIP tcp-data-split not supported
by device
# Totals: pass:0 fail:0 xfail:0 xpass:0 skip:13 error:0
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250404122126.1555648-3-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest to validate the behavior of the built-in idle CPU
selection policy applied to a subset of allowed CPUs, using
scx_bpf_select_cpu_and().
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Verify that we report ENOENT when userspace tries to create a
thread-group leader pidfd for a thread pidfd that isn't a thread-group
leader.
Link: https://lore.kernel.org/r/20250403-work-pidfd-fixes-v1-4-a123b6ed6716@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Adapt to changes in commit 9133607de3 ("exit: fix the usage of
delay_group_leader->exit_code in do_notify_parent() and pidfs_exit()").
Even if the thread-group leader exited early and succesfully it's exit
status will only be reported once the whole thread-group has exited and
it will share the exit code of the thread-group. So if the thread-group
was SIGKILLed the thread-group leader will also be reported as having
been SIGKILLed.
Link: https://lore.kernel.org/r/20250403-work-pidfd-fixes-v1-1-a123b6ed6716@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a test to check memblock_set_node() behavior.
And create a corner case in which the memblock.reserved array is doubled
during memblock_set_node(). And finally make sure all regions in
memblock.reserved are with valid node id.
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
CC: Mike Rapoport <rppt@kernel.org>
CC: Yajun Deng <yajun.deng@linux.dev>
Link: https://lore.kernel.org/r/20250318071948.23854-4-richard.weiyang@gmail.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Atomic instructions such as 'ldset' in the guest have been observed to
cause an EL1 data abort with FSC 0x35 (IMPLEMENTATION DEFINED fault
(Unsupported Exclusive or Atomic access)) on Neoverse-N3.
Per DDI0487L.a B2.2.6, atomic instructions are only architecturally
guaranteed for Inner/Outer Shareable Normal Write-Back memory. For
anything else the behavior is IMPLEMENTATION DEFINED and can lose
atomicity, or, in this case, generate an abort.
It would appear that selftests sets up the stage-1 mappings as Non
Shareable, leading to the observed abort. Explicitly set the
Shareability field to Inner Shareable for non-LPA2 page tables. Note
that for the LPA2 page table format, translations for cacheable memory
inherit the shareability attribute of the PTW, i.e. TCR_ELx.SH{0,1}.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-3-rananta@google.com
[oliver: Rephrase changelog]
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
The kvm selftest library for arm64 currently configures the hardware
fields, such as shift and mask in the page-table entries and registers,
directly with numbers. While it add comments at places, it's better to
rewrite them with appropriate macros to improve the readability and
reduce the risk of errors. Hence, introduce macros to define the
hardware fields and use them in the arm64 processor library.
Most of the definitions are primary copied from the Linux's header,
arch/arm64/include/asm/pgtable-hwdef.h.
No functional change intended.
Suggested-by: Oliver Upton <oupton@google.com>
Signed-off-by: Raghavendra Rao Ananta <rananta@google.com>
Link: https://lore.kernel.org/r/20250405001042.1470552-2-rananta@google.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Currently, the res_spin_lock test is too chatty as it constantly prints
the test_run results for each iteration in each thread, so in case
verbose output is requested or things go wrong, it will flood the logs
of CI and other systems with repeated messages that offer no valuable
insight. Reduce this by doing assertions when the condition actually
flips, and proceed to break out and exit the threads. We still assert
to mark the test as failed and print the expected and reported values.
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250403220841.66654-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This non-functional change serves as preparation for moving to
subsystem-based rstat trees. To simplify future commits, change the
signatures of existing cgroup-based rstat functions to become css-based and
rename them to reflect that.
Though the signatures have changed, the implementations have not. Within
these functions use the css->cgroup pointer to obtain the associated cgroup
and allow code to function the same just as it did before this patch. At
applicable call sites, pass the subsystem-specific css pointer as an
argument or pass a pointer to cgroup::self if not in subsystem context.
Note that cgroup_rstat_updated_list() and cgroup_rstat_push_children()
are not altered yet since there would be a larger amount of css to
cgroup conversions which may overcomplicate the code at this
intermediate phase.
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
All modules that need CONFIG_CRC_T10DIF already select it, so there is no
need to bother users about the option.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20250401221600.24878-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
* The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed.
* The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings.
* Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling.
* Support for relocatable !MMU kernels builds.
* Support for hpge pfnmaps, which should improve TLB utilization.
* Support for runtime constants, which improves the d_hash()
performance.
* Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm.
* Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU.
- Fix ftrace panics by saving the registers as expected by ftrace.
- Fix a couple of stimecmp usage related to cpu hotplug.
- purgatory_start is now aligned as per the STVEC requirements.
- A fix for hugetlb when calculating the size of non-present PTEs.
-----BEGIN PGP SIGNATURE-----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=nCJo
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The sub-architecture selection Kconfig system has been cleaned up,
the documentation has been improved, and various detections have been
fixed
- The vector-related extensions dependencies are now validated when
parsing from device tree and in the DT bindings
- Misaligned access probing can be overridden via a kernel command-line
parameter, along with various fixes to misalign access handling
- Support for relocatable !MMU kernels builds
- Support for hpge pfnmaps, which should improve TLB utilization
- Support for runtime constants, which improves the d_hash()
performance
- Support for bfloat16, Zicbom, Zaamo, Zalrsc, Zicntr, Zihpm
- Various fixes, including:
- We were missing a secondary mmu notifier call when flushing the
tlb which is required for IOMMU
- Fix ftrace panics by saving the registers as expected by ftrace
- Fix a couple of stimecmp usage related to cpu hotplug
- purgatory_start is now aligned as per the STVEC requirements
- A fix for hugetlb when calculating the size of non-present PTEs
* tag 'riscv-for-linus-6.15-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (65 commits)
riscv: Add norvc after .option arch in runtime const
riscv: Make sure toolchain supports zba before using zba instructions
riscv/purgatory: 4B align purgatory_start
riscv/kexec_file: Handle R_RISCV_64 in purgatory relocator
selftests: riscv: fix v_exec_initval_nolibc.c
riscv: Fix hugetlb retrieval of number of ptes in case of !present pte
riscv: print hartid on bringup
riscv: Add norvc after .option arch in runtime const
riscv: Remove CONFIG_PAGE_OFFSET
riscv: Support CONFIG_RELOCATABLE on riscv32
asm-generic: Always define Elf_Rel and Elf_Rela
riscv: Support CONFIG_RELOCATABLE on NOMMU
riscv: Allow NOMMU kernels to access all of RAM
riscv: Remove duplicate CONFIG_PAGE_OFFSET definition
RISC-V: errata: Use medany for relocatable builds
dt-bindings: riscv: document vector crypto requirements
dt-bindings: riscv: add vector sub-extension dependencies
dt-bindings: riscv: d requires f
RISC-V: add f & d extension validation checks
RISC-V: add vector crypto extension validation checks
...
Current release - regressions:
- 4 fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so that
the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=phQZ
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Current release - regressions:
- four fixes for the netdev per-instance locking
Current release - new code bugs:
- consolidate more code between existing Rx zero-copy and uring so
that the latter doesn't miss / have to duplicate the safety checks
Previous releases - regressions:
- ipv6: fix omitted Netlink attributes when using SKIP_STATS
Previous releases - always broken:
- net: fix geneve_opt length integer overflow
- udp: fix multiple wrap arounds of sk->sk_rmem_alloc when it
approaches INT_MAX
- dsa: mvpp2: add a lock to avoid corruption of the shared TCAM
- dsa: airoha: fix issues with traffic QoS configuration / offload,
and flow table offload
Misc:
- touch up the Netlink YAML specs of old families to make them usable
for user space C codegen"
* tag 'net-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (56 commits)
selftests: net: amt: indicate progress in the stress test
netlink: specs: rt_route: pull the ifa- prefix out of the names
netlink: specs: rt_addr: pull the ifa- prefix out of the names
netlink: specs: rt_addr: fix get multi command name
netlink: specs: rt_addr: fix the spec format / schema failures
net: avoid false positive warnings in __net_mp_close_rxq()
net: move mp dev config validation to __net_mp_open_rxq()
net: ibmveth: make veth_pool_store stop hanging
arcnet: Add NULL check in com20020pci_probe()
ipv6: Do not consider link down nexthops in path selection
ipv6: Start path selection from the first nexthop
usbnet:fix NPE during rx_complete
net: octeontx2: Handle XDP_ABORTED and XDP invalid as XDP_DROP
net: fix geneve_opt length integer overflow
io_uring/zcrx: fix selftests w/ updated netdev Python helpers
selftests: net: use netdevsim in netns test
docs: net: document netdev notifier expectations
net: dummy: request ops lock
netdevsim: add dummy device notifiers
net: rename rtnl_net_debug to lock_debug
...
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Link: https://lore.kernel.org/bpf/20250401061546.1990156-1-nichen@iscas.ac.cn
A few selftests and, more importantly, consequent changes to the
bpf_helpers.h file, use likely/unlikely macros, so define them here
and remove duplicate definitions from existing selftests.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250331203618.1973691-3-a.s.protopopov@gmail.com
Our CI expects output from the test at least once every 10 minutes.
The AMT test when running on debug kernel is just on the edge
of that time for the stress test. Improve the output:
- print the name of the test first, before starting it,
- output a dot every 10% of the way.
Output after:
TEST: amt discovery [ OK ]
TEST: IPv4 amt multicast forwarding [ OK ]
TEST: IPv6 amt multicast forwarding [ OK ]
TEST: IPv4 amt traffic forwarding torture .......... [ OK ]
TEST: IPv6 amt traffic forwarding torture .......... [ OK ]
Reviewed-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250403145636.2891166-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YAML specs don't normally include the C prefix name in the name
of the YAML attr. Remove the ifa- prefix from all attributes
in addr-attrs and specify name-prefix instead.
This is a bit risky, hopefully there aren't many users out there.
Fixes: dfb0f7d9d9 ("doc/netlink: Add spec for rt addr messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Command names should match C defines, codegens may depend on it.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Fixes: 4f280376e5 ("selftests/net: Add selftest for IPv4 RTM_GETMULTICAST support")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250403013706.2828322-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a "-l <latency>" param to the rseq test so that the user can override
/dev/cpu_dma_latency, as described by the test's suggested workaround for
not being able to complete enough migrations.
cpu_dma_latency is not a normal file, even as far as procfs files go.
Writes to cpu_dma_latency only persist so long as the file is open, e.g.
so that the kernel automatically reverts back to a power-optimized state
once the sensitive workload completes. Provide the necessary functionality
instead of effectively forcing the user to write a non-obvious wrapper.
Cc: Dongsheng Zhang <dongsheng.x.zhang@intel.com>
Cc: Zide Chen <zide.chen@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250401142238.819487-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Several tests cover infrastructure from virt/kvm/ and userspace APIs that have
only minimal requirements from architecture-specific code. As such, they are
available on all architectures that have libkvm support, and this presumably
will apply also in the future (for example if loongarch gets selftests support).
Put them in a separate variable and list them only once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250401141327.785520-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20250331221851.614582-1-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Run each testcase in a separate VMs to cover more possibilities;
move WRMSR close to MONITOR/MWAIT to test updating CPUID bits
while in the VM.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit 57ed58c132 ("selftests: ublk: enable zero copy for stripe target")
added test entry of test_stripe_04, but forgot to add the test script.
So fix the test by adding the script file.
Reported-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250404001849.1443064-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmfvB5IQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpgnAEACYhVXXsIsoRqzhp2OTDEUPU8OLxe285h1s
3u+erGnFiWUAxs54fbJjGCzqQSeAIcr2EuAWEyMdhixTwykoAdrlnKZzuH7jnHZ4
FVkvOVlP6+7lRshJzr5FEsg5I7HxNMvFmnVKHoAsJRVqfiYbrRbIzSQokiWPE3lb
a6ptr0itZgXjWftUIIioG6JBYuvZLY0OAqRQPvONB784hSwKxaqTBIY4LaWv+TBb
SIwe26lXONSGtbQ7g/Vpkta6edcymEqiU1V4XPmjlal0DCMmN9jXY6gTBi/8JfwA
DITSsDzXNvjAJfXclYzPk8sbNHlgZIha0+yqkVTQpxK8M9gahAAI1Z8TzkjXAG/G
ttsXKq4DfP9tvytsaOc/blO/NSXiPLcPEmr9m1GYFL3c95tpYwhjSEZwcsyXvRbK
Ooc3+s6ZYBWT8xO0pS1kRArYTILr6MR6fNbWO0H+f5+kNHSjXWl+0PwuYCpI5UW9
z9BXVNqM6des7XI+7JRuaLhXoRTn6s5Wz8o4IP/xaNsKQLaosiRDjUxoAE/ZXmNx
IvR+GCJsLU9xTOd97TIHuj+zfgnRbUiheRbCfpUCoTnmzkcWdqJhPCajtIEus5dI
g5t2R5TnjRQObgOLTD0DVC2kdDjsOx1y0uDxBUNTBdUR+7TINX7jlkKurmSJMvEC
MZp77CFcDA==
=kf65
-----END PGP SIGNATURE-----
Merge tag 'io_uring-6.15-20250403' of git://git.kernel.dk/linux
Pull more io_uring updates from Jens Axboe:
"Set of fixes/updates for io_uring that should go into this release.
The ublk bits could've gone via either tree - usually I put them in
block, but they got a bit mixed this series with the zero-copy
supported that ended up dipping into both trees.
This contains:
- Fix for sendmsg zc, include in pinned pages accounting like we do
for the other zc types
- Series for ublk fixing request aborting, doing various little
cleanups, fixing some zc issues, and adding queue_rqs support
- Another ublk series doing some code cleanups
- Series cleaning up the io_uring send path, mostly in preparation
for registered buffers
- Series doing little MSG_RING cleanups
- Fix for the newly added zc rx, fixing len being 0 for the last
invocation of the callback
- Add vectored registered buffer support for ublk. With that, then
ublk also supports this feature in the kernel revision where it
could generically introduced for rw/net
- A bunch of selftest additions for ublk. This is the majority of the
diffstat
- Silence a KCSAN data race warning for io-wq
- Various little cleanups and fixes"
* tag 'io_uring-6.15-20250403' of git://git.kernel.dk/linux: (44 commits)
io_uring: always do atomic put from iowq
selftests: ublk: enable zero copy for stripe target
io_uring: support vectored kernel fixed buffer
block: add for_each_mp_bvec()
io_uring: add validate_fixed_range() for validate fixed buffer
selftests: ublk: kublk: fix an error log line
selftests: ublk: kublk: use ioctl-encoded opcodes
io_uring/zcrx: return early from io_zcrx_recv_skb if readlen is 0
io_uring/net: avoid import_ubuf for regvec send
io_uring/rsrc: check size when importing reg buffer
io_uring: cleanup {g,s]etsockopt sqe reading
io_uring: hide caches sqes from drivers
io_uring: make zcrx depend on CONFIG_IO_URING
io_uring: add req flag invariant build assertion
Documentation: ublk: remove dead footnote
selftests: ublk: specify io_cmd_buf pointer type
ublk: specify io_cmd_buf pointer type
io_uring: don't pass ctx to tw add remote helper
io_uring/msg: initialise msg request opcode
io_uring/msg: rename io_double_lock_ctx()
...
Netdevsim has extra register_netdevice_notifier_dev_net notifiers,
use netdevim instead of dummy device to test them out.
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250401163452.622454-9-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't support
those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341 and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures
-----BEGIN PGP SIGNATURE-----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=QJeg
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"We see a net reduction of the number of lines of code thanks to the
removal of a now unused driver and a testing tool that is not used
anymore. Apart from this, the max31335 driver gets support for a new
part number and pm8xxx gets UEFI support.
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't
support those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341
and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures"
* tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: remove 'setdate' test program
selftest: rtc: skip some tests if the alarm only supports minutes
rtc: mt6397: drop unused defines
rtc: pcf85063: replace dev_err+return with return dev_err_probe
rtc: pcf85063: do a SW reset if POR failed
rtc: max31335: Add driver support for max31331
dt-bindings: rtc: max31335: Add max31331 support
rtc: cros-ec: Avoid a couple of -Wflex-array-member-not-at-end warnings
dt-bindings: rtc: pcf2127: Reference spi-peripheral-props.yaml
rtc: rzn1: implement one-second accuracy for alarms
rtc: pcf50633: Remove
rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
rtc: pm8xxx: mitigate flash wear
rtc: pm8xxx: add support for uefi offset
dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
rtc: rv3032: drop WADA
rtc: rv3032: fix EERD location
rtc: pm8xxx: switch to devm_device_init_wakeup
rtc: pm8xxx: fix possible race condition
rtc: mpfs: switch to devm_device_init_wakeup
...
self-connect-ipv6 got slightly flaky on netdev:
> # timeout set to 120
> # selftests: net/tcp_ao: self-connect_ipv6
> # 1..5
> # # 708[lib/setup.c:250] rand seed 1742872572
> # TAP version 13
> # # 708[lib/proc.c:213] Snmp6 Ip6OutNoRoutes: 0 => 1
> # not ok 1 # error 708[self-connect.c:70] failed to connect()
> # ok 2 No unexpected trace events during the test run
> # # Planned tests != run tests (5 != 2)
> # # Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:1
> ok 1 selftests: net/tcp_ao: self-connect_ipv6
I can not reproduce it on my machines, but judging by "Ip6OutNoRoutes"
there is no route to the local_addr (::1).
Looking at the kernel code, I see that kernel does add link-local
address automatically in init_loopback(), but that is called from
ipv6 notifier block. So, in turn the userspace that brought up
the loopback interface may see rtnetlink ACK earlier than
addrconf_notify() does it's job (at least, on a slow VM such as netdev).
Probably, for ipv4 it's the same, judging by inetdev_event().
The fix is quite simple: set the link-local route straight after
bringing the loopback interface. That will make it synchronous.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250402-tcp-ao-selfconnect-flake-v1-1-8388d629ef3d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=/mR3
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF selftests expectations of assembler output and struct layout
(Song Liu and Yonghong Song)
- Fix XSK error code when queue is full (Wang Liang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix verifier_private_stack test failure
selftests/bpf: Fix verifier_bpf_fastcall test
selftests/bpf: Fix tests after fields reorder in struct file
xsk: Fix __xsk_generic_xmit() error code when cq is full
from Mike Rapoport fixes a couple of issues with the just-merged "arch,
mm: reduce code duplication in mem_init()" series.
- The 4 patch series "MAINTAINERS: add my isub-entries to MM part." from
Mike Rapoport does some maintenance on MAINTAINERS.
- The 6 patch series "remove tlb_remove_page_ptdesc()" from Qi Zheng
does some cleanup work to the page mapping code.
- The 7 patch series "mseal system mappings" from Jeff Xu permits
sealing of "system mappings", such as vdso, vvar, vvar_vclock, vectors
(arm compat-mode), sigpage (arm compat-mode).
- Plus the usual shower of singleton patches.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+4XpgAKCRDdBJ7gKXxA
jnwtAP43Rp3zyWf034fEypea36xQqcsy4I7YUTdZEgnFS7LCZwEApM97JvGHsYEr
Ns9Zhnh+E3RWASfOAzJoVZVrAaMovg4=
=MyVR
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
Commit [1] moves percpu data on x86 from address 0x000... to address
0xfff...
Before [1]:
159020: 0000000000030700 0 OBJECT GLOBAL DEFAULT 23 pcpu_hot
After [1]:
152602: ffffffff83a3e034 4 OBJECT GLOBAL DEFAULT 35 pcpu_hot
As a result, verifier_bpf_fastcall tests should now expect a negative
value for pcpu_hot, IOW, the disassemble should show "r=" instead of
"w=".
Fix this in the test.
Note that, a later change created a new variable "cpu_number" for
bpf_get_smp_processor_id() [2]. The inlining logic is updated properly
as part of this change, so there is no need to fix anything on the
kernel side.
[1] commit 9d7de2aa8b ("x86/percpu/64: Use relative percpu offsets")
[2] commit 01c7bc5198 ("x86/smp: Move cpu number to percpu hot section")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250328193124.808784-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The change in struct file [1] moved f_ref to the 3rd cache line.
It made *(u64 *)file dereference invalid from the verifier point of view,
because btf_struct_walk() walks into f_lock field, which is 4-byte long.
Fix the selftests to deference the file pointer as a 4-byte access.
[1] commit e249056c91 ("fs: place f_ref to 3rd cache line in struct file to resolve false sharing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250327185528.1740787-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and remove gotos for error
handling.
- Some followup patches to support dirty shutdown accounting
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands. Mostly in preparation for CXL EDAC
code to utilize the Features commands. It's also in preparation for CXL fwctl support
to utilize the CXL Features. The commands include "Get Supported Features", "Get Feature",
and "Set Feature".
- A series to support extended linear cache support described by the ACPI HMAT table. The
addition helps enumerate the cache and also provides additional RAS reporting support for
configuration with extended linear cache. (and related fixes for the
series).
- An update to cxl_test to support a 3-way capable CFMWS.
- A documentation fix to remove unused "mixed mode".
-----BEGIN PGP SIGNATURE-----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=ZME1
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ+1ZqAAKCRCRxhvAZXjc
oqO7AP4jdW03PHsk5zkbuUTzTTngkZQ1AypIJLTCYIoKPATMowD+ILMjOTsVOfxA
h38ziAM3tubsz1pwkGuIlsU+drwz5Ao=
=QfJV
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Add a new maintainer for configfs
- Fix exportfs module description
- Place flexible array memeber at the end of an internal struct in the
mount code
- Add new maintainer for netfslib as Jeff Layton is stepping down as
current co-maintainer
- Fix error handling in cachefiles_get_directory()
- Cleanup do_notify_pidfd()
- Fix syscall number definitions in pidfd selftests
- Fix racy usage of fs_struct->in exec during multi-threaded exec
- Ensure correct exit code is reported when pidfs_exit() is called from
release_task() for a delayed thread-group leader exit
- Fix conflicting iomap flag definitions
* tag 'vfs-6.15-rc1.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: Fix conflicting values of iomap flags
fs: namespace: Avoid -Wflex-array-member-not-at-end warning
MAINTAINERS: configfs: add Andreas Hindborg as maintainer
exportfs: add module description
exit: fix the usage of delay_group_leader->exit_code in do_notify_parent() and pidfs_exit()
netfs: add Paulo as maintainer and remove myself as Reviewer
cachefiles: Fix oops in vfs_mkdir from cachefiles_get_directory
exec: fix the racy usage of fs_struct->in_exec
selftests/pidfd: fixes syscall number defines
pidfs: cleanup the usage of do_notify_pidfd()
Add a test case to validate the interaction between TBF and SKBPRIO queueing
disciplines, specifically targeting queue length accounting corner cases.
This test complements the fix for the queue length accounting issue in the
SKBPRIO qdisc. This is still best-effort, as timing and manipulating enqueue
and dequeue from user-space is very hard.
Cc: Pedro Tammela <pctammela@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250329222536.696204-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc",
error queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported,
avoid spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmfrLiQACgkQMUZtbf5S
IrvDsg//VH5VmkMau/TUF1WpwA03Wb/X0UqtM72lufVCMGYCogqjHZzs9popfhuu
CCi4ZiBofEJHfN9WYJoumUL8aOdux0Q875o7h5gvfqKCokkUbJDk3W32QiLj1RqZ
L14TorNOyS9Tg9m60pLa/6H3WS0kduhUGLuLzgTmOtT/YVJrOGmBtk/tRXFAKclH
f3CPucvZGS5Fr4HfUc3yWXiocjibDJnv+jE+xW6S6YHpghvsK7anUvqIGTqQV8Vp
s6AuvFULGO00968hFHcO0N8f8MnaCCJr2bcHCOXyjssdEbdvDOqzhFN4KhxWEPbK
kCl3rLkPdkXo+ekOC7gIxXXaKVz3IVm28pegtEws8fda/iLuqZTp+BKo7kdrf3Iy
br0rP/iK3eFN0M1XpVUIbmEuJ6VamztCzK88uvDKdI+Ol3GLAfy9v5NmkbzJI+aE
cw+SyE6NgbeDeHBxvOu2F7G2sWMBkTEGaHMNXCv7I/VAvQsbk48onTVnpA+GlFD5
vFqMxiZHLBUfFOfUcHxmw8KAkZ44pc1xEkpw/4s8GZOfq+1oWz2LrSQ8M8Hjs2VN
NTuE44OOsBDPOJ54iDAIOr5jyF+ZDeWEuPbvWbHGri80gII+2iF2788N2ToyAkyR
R0t4VtJwXF+8D6IxTG41OIvAuq9Zc8AqM6O7VnOyFhZtKqezBTI=
=BDoM
-----END PGP SIGNATURE-----
Merge tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Rather tiny pull request, mostly so that we can get into our trees
your fix to the x86 Makefile.
Current release - regressions:
- Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc", error
queue accounting was missed
Current release - new code bugs:
- 5 fixes for the netdevice instance locking work
Previous releases - regressions:
- usbnet: restore usb%d name exception for local mac addresses
Previous releases - always broken:
- rtnetlink: allocate vfinfo size for VF GUIDs when supported, avoid
spurious GET_LINK failures
- eth: mana: Switch to page pool for jumbo frames
- phy: broadcom: Correct BCM5221 PHY model detection
Misc:
- selftests: drv-net: replace helpers for referring to other files"
* tag 'net-6.15-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (22 commits)
Revert "tcp: avoid atomic operations on sk->sk_rmem_alloc"
bnxt_en: bring back rtnl lock in bnxt_shutdown
eth: gve: add missing netdev locks on reset and shutdown paths
selftests: mptcp: ignore mptcp_diag binary
selftests: mptcp: close fd_in before returning in main_loop
selftests: mptcp: fix incorrect fd checks in main_loop
mptcp: fix NULL pointer in can_accept_new_subflow
octeontx2-af: Free NIX_AF_INT_VEC_GEN irq
octeontx2-af: Fix mbox INTR handler when num VFs > 64
net: fix use-after-free in the netdev_nl_sock_priv_destroy()
selftests: net: use Path helpers in ping
selftests: net: use the dummy bpf from net/lib
selftests: drv-net: replace the rpath helper with Path objects
net: lapbether: use netdev_lockdep_set_classes() helper
net: phy: broadcom: Correct BCM5221 PHY model detection
net: usb: usbnet: restore usb%d name exception for local mac addresses
net/mlx5e: SHAMPO, Make reserved size independent of page size
net: mana: Switch to page pool for jumbo frames
MAINTAINERS: Add dedicated entries for phy_link_topology
net: move replay logic to tc_modify_qdisc
...
Two significant new items:
- Allow reporting IOMMU HW events to userspace when the events are clearly
linked to a device. This is linked to the VIOMMU object and is intended to
be used by a VMM to forward HW events to the virtual machine as part of
emulating a vIOMMU. ARM SMMUv3 is the first driver to use this
mechanism. Like the existing fault events the data is delivered through
a simple FD returning event records on read().
- PASID support in VFIO. "Process Address Space ID" is a PCI feature that
allows the device to tag all PCI DMA operations with an ID. The IOMMU
will then use the ID to select a unique translation for those DMAs. This
is part of Intel's vIOMMU support as VT-D HW requires the hypervisor to
manage each PASID entry. The support is generic so any VFIO user could
attach any translation to a PASID, and the support should work on ARM
SMMUv3 as well. AMD requires additional driver work.
Some minor updates, along with fixes:
- Prevent using nested parents with fault's, no driver support today
- Put a single "cookie_type" value in the iommu_domain to indicate what
owns the various opaque owner fields
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ+q6NgAKCRCFwuHvBreF
YZ3zAQDbl4/Z0O+CLN2AXq4Zeiyq1HTSoF94hzqmm7lQ17zTIwD8CCdyLXHvupaq
tkBIv5IovpaxlrSk6M0kh2K8vPCk9Qk=
=CIM3
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Two significant new items:
- Allow reporting IOMMU HW events to userspace when the events are
clearly linked to a device.
This is linked to the VIOMMU object and is intended to be used by a
VMM to forward HW events to the virtual machine as part of
emulating a vIOMMU. ARM SMMUv3 is the first driver to use this
mechanism. Like the existing fault events the data is delivered
through a simple FD returning event records on read().
- PASID support in VFIO.
The "Process Address Space ID" is a PCI feature that allows the
device to tag all PCI DMA operations with an ID. The IOMMU will
then use the ID to select a unique translation for those DMAs. This
is part of Intel's vIOMMU support as VT-D HW requires the
hypervisor to manage each PASID entry.
The support is generic so any VFIO user could attach any
translation to a PASID, and the support should work on ARM SMMUv3
as well. AMD requires additional driver work.
Some minor updates, along with fixes:
- Prevent using nested parents with fault's, no driver support today
- Put a single "cookie_type" value in the iommu_domain to indicate
what owns the various opaque owner fields"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (49 commits)
iommufd: Test attach before detaching pasid
iommufd: Fix iommu_vevent_header tables markup
iommu: Convert unreachable() to BUG()
iommufd: Balance veventq->num_events inc/dec
iommufd: Initialize the flags of vevent in iommufd_viommu_report_event()
iommufd/selftest: Add coverage for reporting max_pasid_log2 via IOMMU_HW_INFO
iommufd: Extend IOMMU_GET_HW_INFO to report PASID capability
vfio: VFIO_DEVICE_[AT|DE]TACH_IOMMUFD_PT support pasid
vfio-iommufd: Support pasid [at|de]tach for physical VFIO devices
ida: Add ida_find_first_range()
iommufd/selftest: Add coverage for iommufd pasid attach/detach
iommufd/selftest: Add test ops to test pasid attach/detach
iommufd/selftest: Add a helper to get test device
iommufd/selftest: Add set_dev_pasid in mock iommu
iommufd: Allow allocating PASID-compatible domain
iommu/vt-d: Add IOMMU_HWPT_ALLOC_PASID support
iommufd: Enforce PASID-compatible domain for RID
iommufd: Support pasid attach/replace
iommufd: Enforce PASID-compatible domain in PASID path
iommufd/device: Add pasid_attach array to track per-PASID attach
...
When doing io_uring operations using liburing, errno is not used to
indicate errors, so the %m format specifier does not provide any
relevant information for failed io_uring commands. Fix a log line
emitted on get_params failure to translate the error code returned in
the cqe->res field instead.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250401-ublk_selftests-v1-2-98129c9bc8bb@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are a couple of places in the kublk selftests ublk server which
use the legacy ublk opcodes. These operations fail (with -EOPNOTSUPP) on
a kernel compiled without CONFIG_BLKDEV_UBLK_LEGACY_OPCODES set. We
could easily require it to be set as a prerequisite for these selftests,
but since new applications should not be using the legacy opcodes, use
the ioctl-encoded opcodes everywhere in kublk.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250401-ublk_selftests-v1-1-98129c9bc8bb@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in 6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates.
This has been in linux-next for a while now, with the only reported
issue being some merge conflicts with the rust tree. Depending on which
tree you pull first, you will have conflicts in one of them. The merge
resolution has been in linux-next as an example of what to do, or can be
found here:
https://lore.kernel.org/r/CANiq72n3Xe8JcnEjirDhCwQgvWoE65dddWecXnfdnbrmuah-RQ@mail.gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ+mMrg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRgwCdH58OE3BgL0uoFY5vFImStpmPtqUAoL5HpVWI
jtbJ+UuXGsnmO+JVNBEv
=gy6W
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updatesk from Greg KH:
"Here is the big set of driver core updates for 6.15-rc1. Lots of stuff
happened this development cycle, including:
- kernfs scaling changes to make it even faster thanks to rcu
- bin_attribute constify work in many subsystems
- faux bus minor tweaks for the rust bindings
- rust binding updates for driver core, pci, and platform busses,
making more functionaliy available to rust drivers. These are all
due to people actually trying to use the bindings that were in
6.14.
- make Rafael and Danilo full co-maintainers of the driver core
codebase
- other minor fixes and updates"
* tag 'driver-core-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (52 commits)
rust: platform: require Send for Driver trait implementers
rust: pci: require Send for Driver trait implementers
rust: platform: impl Send + Sync for platform::Device
rust: pci: impl Send + Sync for pci::Device
rust: platform: fix unrestricted &mut platform::Device
rust: pci: fix unrestricted &mut pci::Device
rust: device: implement device context marker
rust: pci: use to_result() in enable_device_mem()
MAINTAINERS: driver core: mark Rafael and Danilo as co-maintainers
rust/kernel/faux: mark Registration methods inline
driver core: faux: only create the device if probe() succeeds
rust/faux: Add missing parent argument to Registration::new()
rust/faux: Drop #[repr(transparent)] from faux::Registration
rust: io: fix devres test with new io accessor functions
rust: io: rename `io::Io` accessors
kernfs: Move dput() outside of the RCU section.
efi: rci2: mark bin_attribute as __ro_after_init
rapidio: constify 'struct bin_attribute'
firmware: qemu_fw_cfg: constify 'struct bin_attribute'
powerpc/perf/hv-24x7: Constify 'struct bin_attribute'
...
reservation" from Sourabh Jain changes powerpc's kexec code to use more
of the generic layers.
- The 2 patch series "get_maintainer: report subsystem status
separately" from Vlastimil Babka makes some long-requested improvements
to the get_maintainer output.
- The 4 patch series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the ucount
code.
- The 12 patch series "reboot: support runtime configuration of
emergency hw_protection action" from Ahmad Fatoum improves the ability
for a driver to perform an emergency system shutdown or reboot.
- The 16 patch series "Converge on using secs_to_jiffies() part two"
from Easwar Hariharan performs further migrations from
msecs_to_jiffies() to secs_to_jiffies().
- The 7 patch series "lib/interval_tree: add some test cases and
cleanup" from Wei Yang permits more userspace testing of kernel library
code, adds some more tests and performs some cleanups.
- The 2 patch series "hung_task: Dump the blocking task stacktrace" from
Masami Hiramatsu arranges for the hung_task detector to dump the stack
of the blocking task and not just that of the blocked task.
- The 4 patch series "resource: Split and use DEFINE_RES*() macros" from
Andy Shevchenko provides some cleanups to the resource definition
macros.
- Plus the usual shower of singleton patches - please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nuqwAKCRDdBJ7gKXxA
jtNqAQDxqJpjWkzn4yN9CNSs1ivVx3fr6SqazlYCrt3u89WQvwEA1oRrGpETzUGq
r6khQUIcQImPPcjFqEFpuiSOU0MBZA0=
=Kii8
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- The series "powerpc/crash: use generic crashkernel reservation" from
Sourabh Jain changes powerpc's kexec code to use more of the generic
layers.
- The series "get_maintainer: report subsystem status separately" from
Vlastimil Babka makes some long-requested improvements to the
get_maintainer output.
- The series "ucount: Simplify refcounting with rcuref_t" from
Sebastian Siewior cleans up and optimizing the refcounting in the
ucount code.
- The series "reboot: support runtime configuration of emergency
hw_protection action" from Ahmad Fatoum improves the ability for a
driver to perform an emergency system shutdown or reboot.
- The series "Converge on using secs_to_jiffies() part two" from Easwar
Hariharan performs further migrations from msecs_to_jiffies() to
secs_to_jiffies().
- The series "lib/interval_tree: add some test cases and cleanup" from
Wei Yang permits more userspace testing of kernel library code, adds
some more tests and performs some cleanups.
- The series "hung_task: Dump the blocking task stacktrace" from Masami
Hiramatsu arranges for the hung_task detector to dump the stack of
the blocking task and not just that of the blocked task.
- The series "resource: Split and use DEFINE_RES*() macros" from Andy
Shevchenko provides some cleanups to the resource definition macros.
- Plus the usual shower of singleton patches - please see the
individual changelogs for details.
* tag 'mm-nonmm-stable-2025-03-30-18-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (77 commits)
mailmap: consolidate email addresses of Alexander Sverdlin
fs/procfs: fix the comment above proc_pid_wchan()
relay: use kasprintf() instead of fixed buffer formatting
resource: replace open coded variant of DEFINE_RES()
resource: replace open coded variants of DEFINE_RES_*_NAMED()
resource: replace open coded variant of DEFINE_RES_NAMED_DESC()
resource: split DEFINE_RES_NAMED_DESC() out of DEFINE_RES_NAMED()
samples: add hung_task detector mutex blocking sample
hung_task: show the blocker task if the task is hung on mutex
kexec_core: accept unaccepted kexec segments' destination addresses
watchdog/perf: optimize bytes copied and remove manual NUL-termination
lib/interval_tree: fix the comment of interval_tree_span_iter_next_gap()
lib/interval_tree: skip the check before go to the right subtree
lib/interval_tree: add test case for span iteration
lib/interval_tree: add test case for interval_tree_iter_xxx() helpers
lib/rbtree: add random seed
lib/rbtree: split tests
lib/rbtree: enable userland test suite for rbtree related data structure
checkpatch: describe --min-conf-desc-length
scripts/gdb/symbols: determine KASLR offset on s390
...
Uros Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was founf to be incorrect.
- The 4 patch series "Some cleanup for memcg" from Chen Ridong
implements some relatively monir cleanups for the memcontrol code.
- The 17 patch series "mm: fixes for device-exclusive entries (hmm)"
from David Hildenbrand fixes a boatload of issues which David found then
using device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now succeed.
- The 2 patch series "mm: zswap: remove z3fold and zbud" from Yosry
Ahmed remove the z3fold and zbud implementations. They have been
deprecated for half a year and nobody has complained.
- The 5 patch series "mm: further simplify VMA merge operation" from
Lorenzo Stoakes implements numerous simplifications in this area. No
runtime effects are anticipated.
- The 4 patch series "mm/madvise: remove redundant mmap_lock operations
from process_madvise()" from SeongJae Park rationalizes the locking in
the madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The 12 patch series "Tiny cleanup and improvements about SWAP code"
from Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The 2 patch series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak user-visible
output.
- The 2 patch series "mm/damon/paddr: fix large folios access and
schemes handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The 3 patch series "mm/damon/core: fix wrong and/or useless
damos_walk() behaviors" from SeongJae Park fixes a few issues with the
accuracy of kdamond's walking of DAMON regions.
- The 3 patch series "expose mapping wrprotect, fix fb_defio use" from
Lorenzo Stoakes changes the interaction between framebuffer deferred-io
and core MM. No functional changes are anticipated - this is
preparatory work for the future removal of page structure fields.
- The 4 patch series "mm/damon: add support for hugepage_size DAMOS
filter" from Usama Arif adds a DAMOS filter which permits the filtering
by huge page sizes.
- The 4 patch series "mm: permit guard regions for file-backed/shmem
mappings" from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The 4 patch series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping for
pte-mapped large folios.
- The 18 patch series "reimplement per-vma lock as a refcount" from
Suren Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The 5 patch series "Docs/mm/damon: misc DAMOS filters documentation
fixes and improves" from SeongJae Park does some maintenance work on the
DAMON docs.
- The 27 patch series "hugetlb/CMA improvements for large systems" from
Frank van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The 2 patch series "mm/damon: introduce DAMOS filter type for unmapped
pages" from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The 19 patch series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The 12 patch series "selftests/mm: Some cleanups from trying to run
them" from Brendan Jackman fixes a pile of unrelated issues which
Brendan encountered while runnimg our selftests.
- The 2 patch series "fs/proc/task_mmu: add guard region bit to pagemap"
from Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The 7 patch series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply wasn't
being effective.
- The 5 patch series "mm: cleanups for device-exclusive entries (hmm)"
from David Hildenbrand implements a number of unrelated cleanups in this
code.
- The 5 patch series "mm: Rework generic PTDUMP configs" from Anshuman
Khandual implements a number of preparatoty cleanups to the
GENERIC_PTDUMP Kconfig logic.
- The 8 patch series "mm/damon: auto-tune aggregation interval" from
SeongJae Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The 5 patch series "Fix lazy mmu mode" from Ryan Roberts fixes some
issues in powerpc, sparc and x86 lazy MMU implementations. Ryan did
this in preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The 2 patch series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the code
easier to follow.
- The 3 patch series "page_counter cleanup and size reduction" from
Shakeel Butt cleans up the page_counter code and fixes a size increase
which we accidentally added late last year.
- The 3 patch series "Add a command line option that enables control of
how many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The 3 patch series "Fix calculations in trace_balance_dirty_pages()
for cgwb" from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The 9 patch series "mm/damon: make allow filters after reject filters
useful and intuitive" from SeongJae Park improves the handling of allow
and reject filters. Behaviour is made more consistent and the
documention is updated accordingly.
- The 5 patch series "Switch zswap to object read/write APIs" from Yosry
Ahmed updates zswap to the new object read/write APIs and thus permits
the removal of some legacy code from zpool and zsmalloc.
- The 6 patch series "Some trivial cleanups for shmem" from Baolin Wang
does as it claims.
- The 20 patch series "fs/dax: Fix ZONE_DEVICE page reference counts"
from Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The 4 patch series "refactor mremap and fix bug" from Lorenzo Stoakes
is a preparatoty refactoring and cleanup of the mremap() code.
- The 20 patch series "mm: MM owner tracking for large folios (!hugetlb)
+ CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The 8 patch series "mm/damon: add sysfs dirs for managing DAMOS
filters based on handling layers" from SeongJae Park adds a couple of
new sysfs directories to ease the management of DAMON/DAMOS filters.
- The 13 patch series "arch, mm: reduce code duplication in mem_init()"
from Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The 13 patch series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The 3 patch series "mm: page_ext: Introduce new iteration API" from
Luiz Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The 8 patch series "Buddy allocator like (or non-uniform) folio split"
from Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios are
generated.
- The 2 patch series "Minimize xa_node allocation during xarry split"
from Zi Yan reduces the number of xarray xa_nodes which are generated
during an xarray split.
- The 2 patch series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The 3 patch series "Add tracepoints for lowmem reserves, watermarks
and totalreserve_pages" from Martin Liu adds some more tracepoints to
the page allocator code.
- The 4 patch series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which SeongJae
observed during his earlier madvise work.
- The 3 patch series "mm/hwpoison: Fix regressions in memory failure
handling" from Shuai Xue addresses two quite serious regressions which
Shuai has observed in the memory-failure implementation.
- The 5 patch series "mm: reliable huge page allocator" from Johannes
Weiner makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The 5 patch series "Minor memcg cleanups & prep for memdescs" from
Matthew Wilcox is preparatory work for the future implementation of
memdescs.
- The 4 patch series "track memory used by balloon drivers" from Nico
Pache introduces a way to track memory used by our various balloon
drivers.
- The 2 patch series "mm/damon: introduce DAMOS filter type for active
pages" from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The 2 patch series "Adding Proactive Memory Reclaim Statistics" from
Hao Jia separates the proactive reclaim statistics from the direct
reclaim statistics.
- The 2 patch series "mm/vmscan: don't try to reclaim hwpoison folio"
from Jinjiang Tu fixes our handling of hwpoisoned pages within the
reclaim code.
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ+nZaAAKCRDdBJ7gKXxA
jsOWAPiP4r7CJHMZRK4eyJOkvS1a1r+TsIarrFZtjwvf/GIfAQCEG+JDxVfUaUSF
Ee93qSSLR1BkNdDw+931Pu0mXfbnBw==
=Pn2K
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
The tool is not embedded in the testing framework. 'rtc' from rtc-tools
serves as a much better programming example. No need to carry this tool
in the kernel tree.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250320103433.11673-1-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
There are alarms which have only minute-granularity. The RTC core
already has a flag to describe them. Use this flag to skip tests which
require the alarm to support seconds.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20250218101548.6514-1-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Vector registers are zero initialized by the kernel. Stop accepting
"all ones" as a clean value.
Note that this was not working as expected given that
value == 0xff
can be assumed to be always false by the compiler as value's range is
[-128, 127]. Both GCC (-Wtype-limits) and clang
(-Wtautological-constant-out-of-range-compare) warn about this.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Ignacio Encinas <ignacio@iencinas.com>
Link: https://lore.kernel.org/r/20250306-fix-v_exec_initval_nolibc-v2-1-97f9dc8a7faf@iencinas.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
A new binary is now generated by the MPTCP selftests: mptcp_diag.
Like the other binaries from this directory, there is no need to track
this in Git, it should then be ignored.
Fixes: 00f5e338cf ("selftests: mptcp: Add a tool to get specific msk_info")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-4-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The file descriptor 'fd_in' is opened when cfg_input is configured, but
not closed in main_loop(), this patch fixes it.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Co-developed-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-3-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a bug where the code was checking the wrong file descriptors
when opening the input files. The code was checking 'fd' instead
of 'fd_in', which could lead to incorrect error handling.
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Fixes: ca7ae89160 ("selftests: mptcp: mptfo Initiator/Listener")
Co-developed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250328-net-mptcp-misc-fixes-6-15-v1-2-34161a482a7f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that net and net-next have converged we can use the Path
helpers in the ping test without conflicts.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250327222315.1098596-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 29b036be1b ("selftests: drv-net: test XDP, HDS auto and
the ioctl path") added an sample XDP_PASS prog in net/lib, so
that we can reuse it in various sub-directories. Delete the old
sample and use the one from the lib in existing tests.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250327222315.1098596-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The single letter + "path" helpers do not have many fans (see Link).
Use a Path object with a better name. test_dir is the replacement
for rpath(), net_lib_dir is a new path of the $ksft/net/lib directory.
The Path() class overloads the "/" operator and can be cast to string
automatically, so to get a path to a file tests can do:
path = env.test_dir / "binary"
Link: https://lore.kernel.org/CA+FuTSemTNVZ5MxXkq8T9P=DYm=nSXcJnL7CJBPZNAT_9UFisQ@mail.gmail.com
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250327222315.1098596-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The current cgroup directory layout for running the partition state
transition tests is mainly suitable for testing local partitions as
well as with a mix of local and remote partitions. It is not that
suitable for doing extensive remote partition and nested remote/local
partition testing.
Add a new set of remote partition tests REMOTE_TEST_MATRIX with another
cgroup directory structure more tailored for remote partition testing
to provide better code coverage.
Also add a few new test cases as well as adjusting existig ones for
the original TEST_MATRIX.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cleaning up the test_cpuset_prs.sh script and restructure some of the
functions so that a new test matrix with a different cgroup directory
structure can be added in the next patch.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, ',' is used as the cgroup separator of the expected effective
CPUs and partition root states in the test matrix. However, ',' can be
part of the output of the cpuset.cpus*.effective and cpuset.cpus.isolated
files. Change the separator to '|' so that ',' can appear as part of
the expected values.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Currently, changes in exclusive CPUs are being handled in
remote_partition_check() by disabling conflicting remote partitions.
However, that may lead to results unexpected by the users. Fix
this problem by removing remote_partition_check() and making
update_cpumasks_hier() handle changes in descendant remote partitions
properly.
The compute_effective_exclusive_cpumask() function is enhanced to check
the exclusive_cpus and effective_xcpus from siblings and excluded them
in its effective exclusive CPUs computation and return a value to show if
there is any sibling conflicts. This is somewhat like the cpu_exclusive
flag check in validate_change(). This is the initial step to enable us
to retire the use of cpu_exclusive flag in cgroup v2 in the future.
One of the tests in the TEST_MATRIX of the test_cpuset_prs.sh
script has to be updated due to changes in the way a child remote
partition root is being handled (updated instead of invalidation)
in update_cpumasks_hier().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
-----BEGIN PGP SIGNATURE-----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=5O7h
-----END PGP SIGNATURE-----
Merge tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf relisient spinlock support from Alexei Starovoitov:
"This patch set introduces Resilient Queued Spin Lock (or rqspinlock
with res_spin_lock() and res_spin_unlock() APIs).
This is a qspinlock variant which recovers the kernel from a stalled
state when the lock acquisition path cannot make forward progress.
This can occur when a lock acquisition attempt enters a deadlock
situation (e.g. AA, or ABBA), or more generally, when the owner of the
lock (which we’re trying to acquire) isn’t making forward progress.
Deadlock detection is the main mechanism used to provide instant
recovery, with the timeout mechanism acting as a final line of
defense. Detection is triggered immediately when beginning the waiting
loop of a lock slow path.
Additionally, BPF programs attached to different parts of the kernel
can introduce new control flow into the kernel, which increases the
likelihood of deadlocks in code not written to handle reentrancy.
There have been multiple syzbot reports surfacing deadlocks in
internal kernel code due to the diverse ways in which BPF programs can
be attached to different parts of the kernel. By switching the BPF
subsystem’s lock usage to rqspinlock, all of these issues are
mitigated at runtime.
This spin lock implementation allows BPF maps to become safer and
remove mechanisms that have fallen short in assuring safety when
nesting programs in arbitrary ways in the same context or across
different contexts.
We run benchmarks that stress locking scalability and perform
comparison against the baseline (qspinlock). For the rqspinlock case,
we replace the default qspinlock with it in the kernel, such that all
spin locks in the kernel use the rqspinlock slow path. As such,
benchmarks that stress kernel spin locks end up exercising rqspinlock.
More details in the cover letter in commit 6ffb9017e9 ("Merge branch
'resilient-queued-spin-lock'")"
* tag 'bpf_res_spin_lock' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (24 commits)
selftests/bpf: Add tests for rqspinlock
bpf: Maintain FIFO property for rqspinlock unlock
bpf: Implement verifier support for rqspinlock
bpf: Introduce rqspinlock kfuncs
bpf: Convert lpm_trie.c to rqspinlock
bpf: Convert percpu_freelist.c to rqspinlock
bpf: Convert hashtab.c to rqspinlock
rqspinlock: Add locktorture support
rqspinlock: Add entry to Makefile, MAINTAINERS
rqspinlock: Add macros for rqspinlock usage
rqspinlock: Add basic support for CONFIG_PARAVIRT
rqspinlock: Add a test-and-set fallback
rqspinlock: Add deadlock detection and recovery
rqspinlock: Protect waiters in trylock fallback from stalls
rqspinlock: Protect waiters in queue from stalls
rqspinlock: Protect pending bit owners from stalls
rqspinlock: Hardcode cond_acquire loops for arm64
rqspinlock: Add support for timeouts
rqspinlock: Drop PV and virtualization support
rqspinlock: Add rqspinlock.h header
...
-----BEGIN PGP SIGNATURE-----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=aN/V
-----END PGP SIGNATURE-----
Merge tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
"For this merge window we're splitting BPF pull request into three for
higher visibility: main changes, res_spin_lock, try_alloc_pages.
These are the main BPF changes:
- Add DFA-based live registers analysis to improve verification of
programs with loops (Eduard Zingerman)
- Introduce load_acquire and store_release BPF instructions and add
x86, arm64 JIT support (Peilin Ye)
- Fix loop detection logic in the verifier (Eduard Zingerman)
- Drop unnecesary lock in bpf_map_inc_not_zero() (Eric Dumazet)
- Add kfunc for populating cpumask bits (Emil Tsalapatis)
- Convert various shell based tests to selftests/bpf/test_progs
format (Bastien Curutchet)
- Allow passing referenced kptrs into struct_ops callbacks (Amery
Hung)
- Add a flag to LSM bpf hook to facilitate bpf program signing
(Blaise Boscaccy)
- Track arena arguments in kfuncs (Ihor Solodrai)
- Add copy_remote_vm_str() helper for reading strings from remote VM
and bpf_copy_from_user_task_str() kfunc (Jordan Rome)
- Add support for timed may_goto instruction (Kumar Kartikeya
Dwivedi)
- Allow bpf_get_netns_cookie() int cgroup_skb programs (Mahe Tardy)
- Reduce bpf_cgrp_storage_busy false positives when accessing cgroup
local storage (Martin KaFai Lau)
- Introduce bpf_dynptr_copy() kfunc (Mykyta Yatsenko)
- Allow retrieving BTF data with BTF token (Mykyta Yatsenko)
- Add BPF kfuncs to set and get xattrs with 'security.bpf.' prefix
(Song Liu)
- Reject attaching programs to noreturn functions (Yafang Shao)
- Introduce pre-order traversal of cgroup bpf programs (Yonghong
Song)"
* tag 'bpf-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (186 commits)
selftests/bpf: Add selftests for load-acquire/store-release when register number is invalid
bpf: Fix out-of-bounds read in check_atomic_load/store()
libbpf: Add namespace for errstr making it libbpf_errstr
bpf: Add struct_ops context information to struct bpf_prog_aux
selftests/bpf: Sanitize pointer prior fclose()
selftests/bpf: Migrate test_xdp_vlan.sh into test_progs
selftests/bpf: test_xdp_vlan: Rename BPF sections
bpf: clarify a misleading verifier error message
selftests/bpf: Add selftest for attaching fexit to __noreturn functions
bpf: Reject attaching fexit/fmod_ret to __noreturn functions
bpf: Only fails the busy counter check in bpf_cgrp_storage_get if it creates storage
bpf: Make perf_event_read_output accessible in all program types.
bpftool: Using the right format specifiers
bpftool: Add -Wformat-signedness flag to detect format errors
selftests/bpf: Test freplace from user namespace
libbpf: Pass BPF token from find_prog_btf_id to BPF_BTF_GET_FD_BY_ID
bpf: Return prog btf_id without capable check
bpf: BPF token support for BPF_BTF_GET_FD_BY_ID
bpf, x86: Fix objtool warning for timed may_goto
bpf: Check map->record at the beginning of check_and_free_fields()
...
fwctl is a new subsystem intended to bring some common rules and order to
the growing pattern of exposing a secure FW interface directly to
userspace. Unlike existing places like RDMA/DRM/VFIO/uacce that are
exposing a device for datapath operations fwctl is focused on debugging,
configuration and provisioning of the device. It will not have the
necessary features like interrupt delivery to support a datapath.
This concept is similar to the long standing practice in the "HW" RAID
space of having a device specific misc device to manage the RAID
controller FW. fwctl generalizes this notion of a companion debug and
management interface that goes along with a dataplane implemented in an
appropriate subsystem.
There have been three LWN articles written discussing various aspects of
this:
https://lwn.net/Articles/955001/https://lwn.net/Articles/969383/https://lwn.net/Articles/990802/
This pull requests includes three drivers to launch the subsystem:
- CXL provides a vendor scheme for executing commands and a way to learn
the 'command effects' (ie the security properties) of such
commands. The fwctl driver allows access to these mechanism within the
fwctl security model
- mlx5 is family of networking products, the driver supports all current
Mellanox HW still receiving FW feature updates. This includes RDMA
multiprotocol NICs like ConnectX and the Bluefield family of Smart
NICs.
- AMD/Pensando Distributed Services card is a multi protocol Smart NIC
with a multi PCI function design. fwctl works on the management PCI
function following a 'command effects' model similar to CXL.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCZ939zQAKCRCFwuHvBreF
YdOoAQCJq59/UC7lXU+sOsR6LISaDVTT5jAweBo0o036P9+DNAEA1iQdZ/GK2yCJ
Ub33Xo9L+hzIpIbCouI3BtCXqymybAg=
=f5YG
-----END PGP SIGNATURE-----
Merge tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull fwctl subsystem from Jason Gunthorpe:
"fwctl is a new subsystem intended to bring some common rules and order
to the growing pattern of exposing a secure FW interface directly to
userspace.
Unlike existing places like RDMA/DRM/VFIO/uacce that are exposing a
device for datapath operations fwctl is focused on debugging,
configuration and provisioning of the device. It will not have the
necessary features like interrupt delivery to support a datapath.
This concept is similar to the long standing practice in the "HW" RAID
space of having a device specific misc device to manage the RAID
controller FW. fwctl generalizes this notion of a companion debug and
management interface that goes along with a dataplane implemented in
an appropriate subsystem.
There have been three LWN articles written discussing various aspects
of this:
https://lwn.net/Articles/955001/https://lwn.net/Articles/969383/https://lwn.net/Articles/990802/
This includes three drivers to launch the subsystem:
- CXL provides a vendor scheme for executing commands and a way to
learn the 'command effects' (ie the security properties) of such
commands. The fwctl driver allows access to these mechanism within
the fwctl security model
- mlx5 is family of networking products, the driver supports all
current Mellanox HW still receiving FW feature updates. This
includes RDMA multiprotocol NICs like ConnectX and the Bluefield
family of Smart NICs.
- AMD/Pensando Distributed Services card is a multi protocol Smart
NIC with a multi PCI function design. fwctl works on the management
PCI function following a 'command effects' model similar to CXL"
* tag 'for-linus-fwctl' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (30 commits)
pds_fwctl: add Documentation entries
pds_fwctl: add rpc and query support
pds_fwctl: initial driver framework
pds_core: add new fwctl auxiliary_device
pds_core: specify auxiliary_device to be created
pds_core: make pdsc_auxbus_dev_del() void
cxl: Fixup kdoc issues for include/cxl/features.h
fwctl/cxl: Add documentation to FWCTL CXL
cxl/test: Add Set Feature support to cxl_test
cxl/test: Add Get Feature support to cxl_test
cxl: Add support to handle user feature commands for set feature
cxl: Add support to handle user feature commands for get feature
cxl: Add support for fwctl RPC command to enable CXL feature commands
cxl: Move cxl feature command structs to user header
cxl: Add FWCTL support to CXL
mlx5: Create an auxiliary device for fwctl_mlx5
fwctl/mlx5: Support for communicating with mlx5 fw
fwctl: Add documentation
fwctl: FWCTL_RPC to execute a Remote Procedure Call to device firmware
taint: Add TAINT_FWCTL
...
Matching the ublk driver, change the type of io_cmd_buf from char * to
struct ublksrv_io_desc *.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250328194230.2726862-3-csander@purestorage.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=gM1i
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)
- Log debug messages about reset methods being used (Bjorn Helgaas)
- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)
- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)
- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)
Resource management:
- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)
- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)
- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)
- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)
- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)
- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)
- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)
- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)
- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)
ASPM:
- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)
Power management:
- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)
Power control:
- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)
- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)
- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)
- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)
Bandwidth control:
- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)
- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)
Hotplug:
- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)
- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)
- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)
- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)
- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)
- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)
- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)
Virtualization:
- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)
DOE:
- Expose supported DOE features via sysfs (Alistair Francis)
- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)
Endpoint framework:
- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)
- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)
- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)
- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)
- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)
Altera PCIe controller driver:
- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)
AMD MDB PCIe controller driver:
- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)
Broadcom STB PCIe controller driver:
- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)
- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)
- Add BCM2712 support and DT updates (Stanimir Varbanov)
- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)
- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)
- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)
- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)
- Make const read-only arrays static (Colin Ian King)
Cadence PCIe endpoint driver:
- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)
- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)
Freescale Layerscape PCIe controller driver:
- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)
- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)
HiSilicon STB PCIe controller driver:
- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)
Intel Gateway PCIe controller driver:
- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)
Intel VMD host bridge driver:
- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)
MediaTek PCIe Gen3 controller driver:
- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)
- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)
Qualcomm PCIe controller driver:
- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)
- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)
- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)
- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)
- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)
- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)
- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)
Rockchip DesignWare PCIe controller driver:
- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)
Synopsys DesignWare PCIe controller driver:
- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)
- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)
- Add Rockchip support for DWC debugfs features (Niklas Cassel)
- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)
- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)
- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)
TI J721E PCIe driver:
- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)
Xilinx Versal CPM PCIe controller driver:
- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)
- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)
- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)
Miscellaneous:
- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)
- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"
* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...
ublk zero copy usually requires to set dma and segment parameter correctly,
so hard-code null target's dma & segment parameter in non-default value,
and verify if they are setup correctly by ublk driver.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-12-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add test test_generic_02.sh for covering IO dispatch order in case of MQ.
Especially we just support ->queue_rqs() which may affect IO dispatch
order.
Add test_loop_05.sh and test_stripe_03.sh for covering MQ.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250327095123.179113-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----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=MOve
-----END PGP SIGNATURE-----
Merge tag 'for-6.15/io_uring-rx-zc-20250325' of git://git.kernel.dk/linux
Pull io_uring zero-copy receive support from Jens Axboe:
"This adds support for zero-copy receive with io_uring, enabling fast
bulk receive of data directly into application memory, rather than
needing to copy the data out of kernel memory.
While this version only supports host memory as that was the initial
target, other memory types are planned as well, with notably GPU
memory coming next.
This work depends on some networking components which were queued up
on the networking side, but have now landed in your tree.
This is the work of Pavel Begunkov and David Wei. From the v14 posting:
'We configure a page pool that a driver uses to fill a hw rx queue
to hand out user pages instead of kernel pages. Any data that ends
up hitting this hw rx queue will thus be dma'd into userspace
memory directly, without needing to be bounced through kernel
memory. 'Reading' data out of a socket instead becomes a
_notification_ mechanism, where the kernel tells userspace where
the data is. The overall approach is similar to the devmem TCP
proposal
This relies on hw header/data split, flow steering and RSS to
ensure packet headers remain in kernel memory and only desired
flows hit a hw rx queue configured for zero copy. Configuring this
is outside of the scope of this patchset.
We share netdev core infra with devmem TCP. The main difference is
that io_uring is used for the uAPI and the lifetime of all objects
are bound to an io_uring instance. Data is 'read' using a new
io_uring request type. When done, data is returned via a new shared
refill queue. A zero copy page pool refills a hw rx queue from this
refill queue directly. Of course, the lifetime of these data
buffers are managed by io_uring rather than the networking stack,
with different refcounting rules.
This patchset is the first step adding basic zero copy support. We
will extend this iteratively with new features e.g. dynamically
allocated zero copy areas, THP support, dmabuf support, improved
copy fallback, general optimisations and more'
In a local setup, I was able to saturate a 200G link with a single CPU
core, and at netdev conf 0x19 earlier this month, Jamal reported
188Gbit of bandwidth using a single core (no HT, including soft-irq).
Safe to say the efficiency is there, as bigger links would be needed
to find the per-core limit, and it's considerably more efficient and
faster than the existing devmem solution"
* tag 'for-6.15/io_uring-rx-zc-20250325' of git://git.kernel.dk/linux:
io_uring/zcrx: add selftest case for recvzc with read limit
io_uring/zcrx: add a read limit to recvzc requests
io_uring: add missing IORING_MAP_OFF_ZCRX_REGION in io_uring_mmap
io_uring: Rename KConfig to Kconfig
io_uring/zcrx: fix leaks on failed registration
io_uring/zcrx: recheck ifq on shutdown
io_uring/zcrx: add selftest
net: add documentation for io_uring zcrx
io_uring/zcrx: add copy fallback
io_uring/zcrx: throttle receive requests
io_uring/zcrx: set pp memory provider for an rx queue
io_uring/zcrx: add io_recvzc request
io_uring/zcrx: dma-map area for the device
io_uring/zcrx: implement zerocopy receive pp memory provider
io_uring/zcrx: grab a net device
io_uring/zcrx: add io_zcrx_area
io_uring/zcrx: add interface queue and refill queue
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZ+bGgBAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSKmgBAICZsmQTuKMHIXdB7kwA+BX5k++SZcyA+qHN
0hrJTSMsAP0Uv6NpiPT4CTduqBMRbuMwNhujBczRiok6yaHDbC8eCw==
=K8XL
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"This brings two main changes to Landlock:
- A signal scoping fix with a new interface for user space to know if
it is compatible with the running kernel.
- Audit support to give visibility on why access requests are denied,
including the origin of the security policy, missing access rights,
and description of object(s). This was designed to limit log spam
as much as possible while still alerting about unexpected blocked
access.
With these changes come new and improved documentation, and a lot of
new tests"
* tag 'landlock-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: (36 commits)
landlock: Add audit documentation
selftests/landlock: Add audit tests for network
selftests/landlock: Add audit tests for filesystem
selftests/landlock: Add audit tests for abstract UNIX socket scoping
selftests/landlock: Add audit tests for ptrace
selftests/landlock: Test audit with restrict flags
selftests/landlock: Add tests for audit flags and domain IDs
selftests/landlock: Extend tests for landlock_restrict_self(2)'s flags
selftests/landlock: Add test for invalid ruleset file descriptor
samples/landlock: Enable users to log sandbox denials
landlock: Add LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF
landlock: Add LANDLOCK_RESTRICT_SELF_LOG_*_EXEC_* flags
landlock: Log scoped denials
landlock: Log TCP bind and connect denials
landlock: Log truncate and IOCTL denials
landlock: Factor out IOCTL hooks
landlock: Log file-related denials
landlock: Log mount-related denials
landlock: Add AUDIT_LANDLOCK_DOMAIN and log domain status
landlock: Add AUDIT_LANDLOCK_ACCESS and log ptrace denials
...
IOMMU_HW_INFO is extended to report max_pasid_log2, hence add coverage
for it.
Link: https://patch.msgid.link/r/20250321180143.8468-6-yi.l.liu@intel.com
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
- Removal of support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to: Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom, Gaurav
Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook, Mahesh Salgaonkar,
Michael Ellerman, Paul Mackerras, Ritesh Harjani (IBM), Sathvika Vasireddy,
Segher Boessenkool, Sourabh Jain, Vaibhav Jain, Venkat Rao Bagalkote.
-----BEGIN PGP SIGNATURE-----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=GFcj
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates from Madhavan Srinivasan:
- Remove support for IBM Cell Blades
- SMP support for microwatt platform
- Support for inline static calls on PPC32
- Enable pmu selftests for power11 platform
- Enable hardware trace macro (HTM) hcall support
- Support for limited address mode capability
- Changes to RMA size from 512 MB to 768 MB to handle fadump
- Misc fixes and cleanups
Thanks to Abhishek Dubey, Amit Machhiwal, Andreas Schwab, Arnd Bergmann,
Athira Rajeev, Avnish Chouhan, Christophe Leroy, Disha Goel, Donet Tom,
Gaurav Batra, Gautam Menghani, Hari Bathini, Kajol Jain, Kees Cook,
Mahesh Salgaonkar, Michael Ellerman, Paul Mackerras, Ritesh Harjani
(IBM), Sathvika Vasireddy, Segher Boessenkool, Sourabh Jain, Vaibhav
Jain, and Venkat Rao Bagalkote.
* tag 'powerpc-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (61 commits)
powerpc/kexec: fix physical address calculation in clear_utlb_entry()
crypto: powerpc: Mark ghashp8-ppc.o as an OBJECT_FILES_NON_STANDARD
powerpc: Fix 'intra_function_call not a direct call' warning
powerpc/perf: Fix ref-counting on the PMU 'vpa_pmu'
KVM: PPC: Enable CAP_SPAPR_TCE_VFIO on pSeries KVM guests
powerpc/prom_init: Fixup missing #size-cells on PowerBook6,7
powerpc/microwatt: Add SMP support
powerpc: Define config option for processors with broadcast TLBIE
powerpc/microwatt: Define an idle power-save function
powerpc/microwatt: Device-tree updates
powerpc/microwatt: Select COMMON_CLK in order to get the clock framework
net: toshiba: Remove reference to PPC_IBM_CELL_BLADE
net: spider_net: Remove powerpc Cell driver
cpufreq: ppc_cbe: Remove powerpc Cell driver
genirq: Remove IRQ_EDGE_EOI_HANDLER
docs: Remove reference to removed CBE_CPUFREQ_SPU_GOVERNOR
powerpc: Remove UDBG_RTAS_CONSOLE
powerpc/io: Use standard barrier macros in io.c
powerpc/io: Rename _insw_ns() etc.
powerpc/io: Use generic raw accessors
...
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- selftests/ftrace: Improve the ftracetest to add followngs.
. Expand the tprobe event test to check if it can correctly find
the wrong format tracepoint name.
. Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
. Add a new dynamic events argument limitation test case which checks
max number of probe arguments.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmflTlobHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8ba9UIALzzZQxzUhJYO/B/XaCz
KTuSrU2594cLr3nCrmCfL3UHUCr5IcjXKCfUdrgzE9mckWF+nVRXWwbp29KpOQky
fzU9Ardbr7ksGAYFk4My+P/BeYa7vh9LwofXzWlJibANVxWvq66+GfKnWnh1P8Bl
/zjov61DAEQmDfXNGZ2oTmKnYYMoPkJU4voRvAEUgiP02SrF04UUa00uC7hmZJJV
aI5b6TatE5FDEmAoHWh0cf04HoyevRyLVOQd5GSswH/oWpyhs90M7a9WENHamBx6
RXEZ3xYyuH9zBSvYVeRn2H1eHnGCR4RMctZiRGXF8EdLWo7RXRQ1Hp9CgvwDrU8Z
IL0=
=vZ3e
-----END PGP SIGNATURE-----
Merge tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- probe-events: Add comments about entry data storing code to clarify
where and how the entry data is stored for function return events.
- probe-events: Log error for exceeding the number of arguments to help
user to identify error reason via tracefs/error_log file.
- Improve the ftracetest selftests:
- Expand the tprobe event test to check if it can correctly find the
wrong format tracepoint name.
- Add new syntax error test to check whether error_log correctly
indicates a wrong character in the tracepoint name.
- Add a new dynamic events argument limitation test case which
checks max number of probe arguments.
* tag 'probes-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probe-events: Add comments about entry data storing code
selftests/ftrace: Add dynamic events argument limitation test case
selftests/ftrace: Add new syntax error test
selftests/ftrace: Expand the tprobe event test to check wrong format
tracing: probe-events: Log error for exceeding the number of arguments
-----BEGIN PGP SIGNATURE-----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=ggzJ
-----END PGP SIGNATURE-----
Merge tag 'livepatching-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching
Pull livepatching updates from Petr Mladek:
- Add a selftest for tracing of a livepatched function
- Skip a selftest when kprobes are not using ftrace
- Some documentation clean up
* tag 'livepatching-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
selftests: livepatch: test if ftrace can trace a livepatched function
selftests: livepatch: add new ftrace helpers functions
selftest/livepatch: Only run test-kprobe with CONFIG_KPROBES_ON_FTRACE
docs: livepatch: move text out of code block
livepatch: Add comment to clarify klp_add_nops()
kunit tool:
- Changes to kunit tool to use qboot on QEMU x86_64, and build GDB scripts.
- Fixes kunit tool bug in parsing test plan.
- Adds test to kunit tool to check parsing late test plan.
kunit:
- Clarifies kunit_skip() argument name.
- Adds Kunit check for the longest symbol length.
- Changes qemu_configs for sparc to use Zilog console.
-----BEGIN PGP SIGNATURE-----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=h8xS
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"kunit tool:
- Changes to kunit tool to use qboot on QEMU x86_64, and build GDB
scripts
- Fixes kunit tool bug in parsing test plan
- Adds test to kunit tool to check parsing late test plan
kunit:
- Clarifies kunit_skip() argument name
- Adds Kunit check for the longest symbol length
- Changes qemu_configs for sparc to use Zilog console"
* tag 'linux_kselftest-kunit-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: add test to check parsing late test plan
kunit: tool: Fix bug in parsing test plan
Kunit to check the longest symbol length
kunit: Clarify kunit_skip() argument name
kunit: tool: Build GDB scripts
kunit: qemu_configs: sparc: use Zilog console
kunit: tool: Use qboot on QEMU x86_64
Fixes bugs and cleans up code in tracing, ftrace, and user_events tests.
Adds missing executables to ftrace gitignore.
-----BEGIN PGP SIGNATURE-----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=5VeG
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest updates from Shuah Khan:
- Fix bugs and clean up code in tracing, ftrace, and user_events tests
- Add missing executables to ftrace gitignore
* tag 'linux_kselftest-next-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: add 'poll' binary to gitignore
selftests/ftrace: Use readelf to find entry point in uprobe test
selftests/user_events: Fix failures caused by test code
selftests/tracing: Allow some more tests to run in instances
selftests/ftrace: Clean up triggers after setting them
selftests/tracing: Test only toplevel README file not the instances
- Fix failure of directory of log file not existing
If a LOG_FILE option is set for ktest to log its messages, and the
directory path does not exist. Then ktest fails. Have ktest attempt
to create the directory where the log file exists and if that succeeds
continue on testing.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ+WDNxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quknAQDGW0MUyG3OSP1mdTm/a/kvAc4nnx8i
OBfT8ZqDPMXAhgEA2jdn/pvOmh0Nm+cofUC8tzWIdaY0Ey1r/QlCOnx4TAQ=
=QgSs
-----END PGP SIGNATURE-----
Merge tag 'ktest-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest update from Steven Rostedt:
- Fix failure of directory of log file not existing
If a LOG_FILE option is set for ktest to log its messages, and the
directory path does not exist. Then ktest fails. Have ktest attempt
to create the directory where the log file exists and if that
succeeds continue on testing.
* tag 'ktest-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Fix Test Failures Due to Missing LOG_FILE Directories
- Fix endpoint BAR testing so the test can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)
- Verify that pci_endpoint interrupt tests set the correct IRQ type
(Kunihiko Hayashi)
- Fix interpretation of pci_endpoint_test_bars_read_bar() error returns
(Niklas Cassel)
- Fix potential string truncation in pci_endpoint_test_probe() (Niklas
Cassel)
- Increase endpoint test BAR size variable to accommodate BARs larger than
INT_MAX (Niklas Cassel)
- Release IRQs to avoid leak in pci_endpoint interrupt tests (Kunihiko
Hayashi)
- Log the correct IRQ type when pci_endpoint IRQ request test fails
(Kunihiko Hayashi)
- Remove pci_endpoint_test irq_type and no_msi globals; instead use
test->irq_type (Kunihiko Hayashi)
- Remove unnecessary use of managed IRQ functions in pci_endpoint_test
(Kunihiko Hayashi)
- Add and use IRQ_TYPE_* defines in pci_endpoint_test (Niklas Cassel)
- Add struct pci_epc_features.intx_capable and note that RK3568 and RK3588
can't raise INTx interrupts (Niklas Cassel)
- Expose supported IRQ types in CAPS so pci_endpoint_test can set
appropriate type (Niklas Cassel)
- Add PCITEST_IRQ_TYPE_AUTO to pci_endpoint_test for cases where the IRQ
type doesn't matter (Niklas Cassel)
* pci/endpoint-test:
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
selftests: pci_endpoint: Use IRQ_TYPE_* defines from UAPI header
misc: pci_endpoint_test: Use IRQ_TYPE_* defines from UAPI header
PCI: endpoint: pcitest: Add IRQ_TYPE_* defines to UAPI header
misc: pci_endpoint_test: Do not use managed IRQ functions
misc: pci_endpoint_test: Remove global 'irq_type' and 'no_msi'
misc: pci_endpoint_test: Fix 'irq_type' to convey the correct type
misc: pci_endpoint_test: Fix displaying 'irq_type' after 'request_irq' error
misc: pci_endpoint_test: Avoid issue of interrupts remaining after request_irq error
misc: pci_endpoint_test: Handle BAR sizes larger than INT_MAX
misc: pci_endpoint_test: Give disabled BARs a distinct error code
misc: pci_endpoint_test: Fix potential truncation in pci_endpoint_test_probe()
misc: pci_endpoint_test: Fix pci_endpoint_test_bars_read_bar() error handling
selftests: pci_endpoint: Add GET_IRQTYPE checks to each interrupt test
selftests: pci_endpoint: Skip disabled BARs
Handle missing parent directories for LOG_FILE path to prevent test
failures. If the parent directories don't exist, create them to ensure
the tests proceed successfully.
Cc: <warthog9@eaglescrag.net>
Link: https://lore.kernel.org/20250307043854.2518539-1-Ayush.jain3@amd.com
Signed-off-by: Ayush Jain <Ayush.jain3@amd.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Core & protocols
----------------
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls).
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked)
in BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream performance
up to 2x.
- Improve performance of contended connect() by 200% by searching
for an available 4-tuple under RCU rather than a spin lock.
Bring an additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles.
There are up to 4 namespace roles but we used to have just 2 netns
pointer arguments, interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout
in TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar
to normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name
to messages as metadata
Driver API
----------
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where possible.
Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers
--------------
- Remove the IBM LCS driver for s390.
- Remove the sb1000 cable modem driver.
- Add support for SFP module access over SMBus.
- Add MCTP transport driver for MCTP-over-USB.
- Enable XDP metadata support in multiple drivers.
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96% with
1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XY0S
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Continue Netlink conversions to per-namespace RTNL lock
(IPv4 routing, routing rules, routing next hops, ARP ioctls)
- Continue extending the use of netdev instance locks. As a driver
opt-in protect queue operations and (in due course) ethtool
operations with the instance lock and not RTNL lock.
- Support collecting TCP timestamps (data submitted, sent, acked) in
BPF, allowing for transparent (to the application) and lower
overhead tracking of TCP RPC performance.
- Tweak existing networking Rx zero-copy infra to support zero-copy
Rx via io_uring.
- Optimize MPTCP performance in single subflow mode by 29%.
- Enable GRO on packets which went thru XDP CPU redirect (were queued
for processing on a different CPU). Improving TCP stream
performance up to 2x.
- Improve performance of contended connect() by 200% by searching for
an available 4-tuple under RCU rather than a spin lock. Bring an
additional 229% improvement by tweaking hash distribution.
- Avoid unconditionally touching sk_tsflags on RX, improving
performance under UDP flood by as much as 10%.
- Avoid skb_clone() dance in ping_rcv() to improve performance under
ping flood.
- Avoid FIB lookup in netfilter if socket is available, 20% perf win.
- Rework network device creation (in-kernel) API to more clearly
identify network namespaces and their roles. There are up to 4
namespace roles but we used to have just 2 netns pointer arguments,
interpreted differently based on context.
- Use sysfs_break_active_protection() instead of trylock to avoid
deadlocks between unregistering objects and sysfs access.
- Add a new sysctl and sockopt for capping max retransmit timeout in
TCP.
- Support masking port and DSCP in routing rule matches.
- Support dumping IPv4 multicast addresses with RTM_GETMULTICAST.
- Support specifying at what time packet should be sent on AF_XDP
sockets.
- Expose TCP ULP diagnostic info (for TLS and MPTCP) to non-admin
users.
- Add Netlink YAML spec for WiFi (nl80211) and conntrack.
- Introduce EXPORT_IPV6_MOD() and EXPORT_IPV6_MOD_GPL() for symbols
which only need to be exported when IPv6 support is built as a
module.
- Age FDB entries based on Rx not Tx traffic in VxLAN, similar to
normal bridging.
- Allow users to specify source port range for GENEVE tunnels.
- netconsole: allow attaching kernel release, CPU ID and task name to
messages as metadata
Driver API:
- Continue rework / fixing of Energy Efficient Ethernet (EEE) across
the SW layers. Delegate the responsibilities to phylink where
possible. Improve its handling in phylib.
- Support symmetric OR-XOR RSS hashing algorithm.
- Support tracking and preserving IRQ affinity by NAPI itself.
- Support loopback mode speed selection for interface selftests.
Device drivers:
- Remove the IBM LCS driver for s390
- Remove the sb1000 cable modem driver
- Add support for SFP module access over SMBus
- Add MCTP transport driver for MCTP-over-USB
- Enable XDP metadata support in multiple drivers
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- add PCIe TLP Processing Hints (TPH) support for new AMD
platforms
- support dumping RoCE queue state for debug
- opt into instance locking
- Intel (100G, ice, idpf):
- ice: rework MSI-X IRQ management and distribution
- ice: support for E830 devices
- iavf: add support for Rx timestamping
- iavf: opt into instance locking
- nVidia/Mellanox:
- mlx4: use page pool memory allocator for Rx
- mlx5: support for one PTP device per hardware clock
- mlx5: support for 200Gbps per-lane link modes
- mlx5: move IPSec policy check after decryption
- AMD/Solarflare:
- support FW flashing via devlink
- Cisco (enic):
- use page pool memory allocator for Rx
- enable 32, 64 byte CQEs
- get max rx/tx ring size from the device
- Meta (fbnic):
- support flow steering and RSS configuration
- report queue stats
- support TCP segmentation
- support IRQ coalescing
- support ring size configuration
- Marvell/Cavium:
- support AF_XDP
- Wangxun:
- support for PTP clock and timestamping
- Huawei (hibmcge):
- checksum offload
- add more statistics
- Ethernet virtual:
- VirtIO net:
- aggressively suppress Tx completions, improve perf by 96%
with 1 CPU and 55% with 2 CPUs
- expose NAPI to IRQ mapping and persist NAPI settings
- Google (gve):
- support XDP in DQO RDA Queue Format
- opt into instance locking
- Microsoft vNIC:
- support BIG TCP
- Ethernet NICs consumer, and embedded:
- Synopsys (stmmac):
- cleanup Tx and Tx clock setting and other link-focused
cleanups
- enable SGMII and 2500BASEX mode switching for Intel platforms
- support Sophgo SG2044
- Broadcom switches (b53):
- support for BCM53101
- TI:
- iep: add perout configuration support
- icssg: support XDP
- Cadence (macb):
- implement BQL
- Xilinx (axinet):
- support dynamic IRQ moderation and changing coalescing at
runtime
- implement BQL
- report standard stats
- MediaTek:
- support phylink managed EEE
- Intel:
- igc: don't restart the interface on every XDP program change
- RealTek (r8169):
- support reading registers of internal PHYs directly
- increase max jumbo packet size on RTL8125/RTL8126
- Airoha:
- support for RISC-V NPU packet processing unit
- enable scatter-gather and support MTU up to 9kB
- Tehuti (tn40xx):
- support cards with TN4010 MAC and an Aquantia AQR105 PHY
- Ethernet PHYs:
- support for TJA1102S, TJA1121
- dp83tg720: add randomized polling intervals for link detection
- dp83822: support changing the transmit amplitude voltage
- support for LEDs on 88q2xxx
- CAN:
- canxl: support Remote Request Substitution bit access
- flexcan: add S32G2/S32G3 SoC
- WiFi:
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
- batman-adv: add support for jumbo frames
- WiFi drivers:
- RealTek (rtw88):
- support RTL8814AE and RTL8814AU
- RealTek (rtw89):
- switch using wiphy_lock and wiphy_work
- add BB context to manipulate two PHY as preparation of MLO
- improve BT-coexistence mechanism to play A2DP smoothly
- Intel (iwlwifi):
- add new iwlmld sub-driver for latest HW/FW combinations
- MediaTek (mt76):
- preparation for mt7996 Multi-Link Operation (MLO) support
- Qualcomm/Atheros (ath12k):
- continued work on MLO
- Silabs (wfx):
- Wake-on-WLAN support
- Bluetooth:
- add support for skb TX SND/COMPLETION timestamping
- hci_core: enable buffer flow control for SCO/eSCO
- coredump: log devcd dumps into the monitor
- Bluetooth drivers:
- intel: add support to configure TX power
- nxp: handle bootloader error during cmd5 and cmd7"
* tag 'net-next-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1681 commits)
unix: fix up for "apparmor: add fine grained af_unix mediation"
mctp: Fix incorrect tx flow invalidation condition in mctp-i2c
net: usb: asix: ax88772: Increase phy_name size
net: phy: Introduce PHY_ID_SIZE — minimum size for PHY ID string
net: libwx: fix Tx L4 checksum
net: libwx: fix Tx descriptor content for some tunnel packets
atm: Fix NULL pointer dereference
net: tn40xx: add pci-id of the aqr105-based Tehuti TN4010 cards
net: tn40xx: prepare tn40xx driver to find phy of the TN9510 card
net: tn40xx: create swnode for mdio and aqr105 phy and add to mdiobus
net: phy: aquantia: add essential functions to aqr105 driver
net: phy: aquantia: search for firmware-name in fwnode
net: phy: aquantia: add probe function to aqr105 for firmware loading
net: phy: Add swnode support to mdiobus_scan
gve: add XDP DROP and PASS support for DQ
gve: update XDP allocation path support RX buffer posting
gve: merge packet buffer size fields
gve: update GQ RX to use buf_size
gve: introduce config-based allocation for XDP
gve: remove xdp_xsk_done and xdp_xsk_wakeup statistics
...
* Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems leading
to the removal of vm_table from kernel/sysctl.c. This increases modularity by
placing the ctl_tables closer to where they are actually used and at the same
time reducing the chances of merge conflicts in kernel/sysctl.c.
* ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the extra{1,2}
pointers as min/max values. This tightens the range of the values that users
can pass into the kernel effectively preventing {under,over}flows.
* Misc fixes
Correct grammar errors and typos in test messages. Update sysctl files in
MAINTAINERS. Constified and removed array size in declaration for
alignment_tbl
* Testing
- These have all been in linux-next for at least 1 month
- They have gone through 0-day
- Ran all these through sysctl selftests in x86_64
-----BEGIN PGP SIGNATURE-----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=0bcX
-----END PGP SIGNATURE-----
Merge tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl
Pull sysctl updates from Joel Granados:
- Move vm_table members out of kernel/sysctl.c
All vm_table array members have moved to their respective subsystems
leading to the removal of vm_table from kernel/sysctl.c. This
increases modularity by placing the ctl_tables closer to where they
are actually used and at the same time reducing the chances of merge
conflicts in kernel/sysctl.c.
- ctl_table range fixes
Replace the proc_handler function that checks variable ranges in
coredump_sysctls and vdso_table with the one that actually uses the
extra{1,2} pointers as min/max values. This tightens the range of the
values that users can pass into the kernel effectively preventing
{under,over}flows.
- Misc fixes
Correct grammar errors and typos in test messages. Update sysctl
files in MAINTAINERS. Constified and removed array size in
declaration for alignment_tbl
* tag 'sysctl-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: (22 commits)
selftests/sysctl: fix wording of help messages
selftests: fix spelling/grammar errors in sysctl/sysctl.sh
MAINTAINERS: Update sysctl file list in MAINTAINERS
sysctl: Fix underflow value setting risk in vm_table
coredump: Fixes core_pipe_limit sysctl proc_handler
sysctl: remove unneeded include
sysctl: remove the vm_table
sh: vdso: move the sysctl to arch/sh/kernel/vsyscall/vsyscall.c
x86: vdso: move the sysctl to arch/x86/entry/vdso/vdso32-setup.c
fs: dcache: move the sysctl to fs/dcache.c
sunrpc: simplify rpcauth_cache_shrink_count()
fs: drop_caches: move sysctl to fs/drop_caches.c
fs: fs-writeback: move sysctl to fs/fs-writeback.c
mm: nommu: move sysctl to mm/nommu.c
security: min_addr: move sysctl to security/min_addr.c
mm: mmap: move sysctl to mm/mmap.c
mm: util: move sysctls to mm/util.c
mm: vmscan: move vmscan sysctls to mm/vmscan.c
mm: swap: move sysctl to mm/swap.c
mm: filemap: move sysctl to mm/filemap.c
...
Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash. The only non-trivial core change
is an addition to unit attention handling to recognize UAs for power
on/reset and new media so the tape driver can use it.
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZ+RQ2yYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishe6DAQCdW/21
S1Y6BDlJLQfpWChGv6GIzanC+5sMfylw4d6ULgEA8upOE5L3fC29IY958jXig0o1
uLjxylwYEfVLDf8gwJ0=
=mkM+
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (scsi_debug, ufs, lpfc, st, fnic, mpi3mr,
mpt3sas) and the removal of cxlflash.
The only non-trivial core change is an addition to unit attention
handling to recognize UAs for power on/reset and new media so the tape
driver can use it"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (107 commits)
scsi: st: Tighten the page format heuristics with MODE SELECT
scsi: st: ERASE does not change tape location
scsi: st: Fix array overflow in st_setup()
scsi: target: tcm_loop: Fix wrong abort tag
scsi: lpfc: Restore clearing of NLP_UNREG_INP in ndlp->nlp_flag
scsi: hisi_sas: Fixed failure to issue vendor specific commands
scsi: fnic: Remove unnecessary NUL-terminations
scsi: fnic: Remove redundant flush_workqueue() calls
scsi: core: Use a switch statement when attaching VPD pages
scsi: ufs: renesas: Add initialization code for R-Car S4-8 ES1.2
scsi: ufs: renesas: Add reusable functions
scsi: ufs: renesas: Refactor 0x10ad/0x10af PHY settings
scsi: ufs: renesas: Remove register control helper function
scsi: ufs: renesas: Add register read to remove save/set/restore
scsi: ufs: renesas: Replace init data by init code
scsi: ufs: dt-bindings: renesas,ufs: Add calibration data
scsi: mpi3mr: Task Abort EH Support
scsi: storvsc: Don't report the host packet status as the hv status
scsi: isci: Make most module parameters static
scsi: megaraid_sas: Make most module parameters static
...
-----BEGIN PGP SIGNATURE-----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=VEQr
-----END PGP SIGNATURE-----
Merge tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux
Pull io_uring updates from Jens Axboe:
"This is the first of the io_uring pull requests for the 6.15 merge
window, there will be others once the net tree has gone in. This
contains:
- Cleanup and unification of cancelation handling across various
request types.
- Improvement for bundles, supporting them both for incrementally
consumed buffers, and for non-multishot requests.
- Enable toggling of using iowait while waiting on io_uring events or
not. Unfortunately this is still tied with CPU frequency boosting
on short waits, as the scheduler side has not been very receptive
to splitting the (useless) iowait stat from the cpufreq implied
boost.
- Add support for kbuf nodes, enabling zero-copy support for the ublk
block driver.
- Various cleanups for resource node handling.
- Series greatly cleaning up the legacy provided (non-ring based)
buffers. For years, we've been pushing the ring provided buffers as
the way to go, and that is what people have been using. Reduce the
complexity and code associated with legacy provided buffers.
- Series cleaning up the compat handling.
- Series improving and cleaning up the recvmsg/sendmsg iovec and msg
handling.
- Series of cleanups for io-wq.
- Start adding a bunch of selftests. The liburing repository
generally carries feature and regression tests for everything, but
at least for ublk initially, we'll try and go the route of having
it in selftests as well. We'll see how this goes, might decide to
migrate more tests this way in the future.
- Various little cleanups and fixes"
* tag 'for-6.15/io_uring-20250322' of git://git.kernel.dk/linux: (108 commits)
selftests: ublk: add stripe target
selftests: ublk: simplify loop io completion
selftests: ublk: enable zero copy for null target
selftests: ublk: prepare for supporting stripe target
selftests: ublk: move common code into common.c
selftests: ublk: increase max buffer size to 1MB
selftests: ublk: add single sqe allocator helper
selftests: ublk: add generic_01 for verifying sequential IO order
selftests: ublk: fix starting ublk device
io_uring: enable toggle of iowait usage when waiting on CQEs
selftests: ublk: fix write cache implementation
selftests: ublk: add variable for user to not show test result
selftests: ublk: don't show `modprobe` failure
selftests: ublk: add one dependency header
io_uring/kbuf: enable bundles for incrementally consumed buffers
Revert "io_uring/rsrc: simplify the bvec iter count calculation"
selftests: ublk: improve test usability
selftests: ublk: add stress test for covering IO vs. killing ublk server
selftests: ublk: add one stress test for covering IO vs. removing device
selftests: ublk: load/unload ublk_drv when preparing & cleaning up tests
...
Test all network blockers:
- net.bind_tcp
- net.connect_tcp
Test coverage for security/landlock is 94.0% of 1525 lines according to
gcc/gcov-14.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-28-mic@digikod.net
[mic: Update test coverage]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add a new scoped_audit.connect_to_child test to check the abstract UNIX
socket blocker.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-26-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add tests for all ptrace actions checking "blockers=ptrace" records.
This also improves PTRACE_TRACEME and PTRACE_ATTACH tests by making sure
that the restrictions comes from Landlock, and with the expected
process. These extended tests are like enhanced errno checks that make
sure Landlock enforcement is consistent.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-25-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add audit_exec tests to filter Landlock denials according to
cross-execution or muted subdomains.
Add a wait-pipe-sandbox.c test program to sandbox itself and send a
(denied) signals to its parent.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-24-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add audit_test.c to check with and without LANDLOCK_RESTRICT_SELF_*
flags against the two Landlock audit record types:
AUDIT_LANDLOCK_ACCESS and AUDIT_LANDLOCK_DOMAIN.
Check consistency of domain IDs per layer in AUDIT_LANDLOCK_ACCESS and
AUDIT_LANDLOCK_DOMAIN messages: denied access, domain allocation, and
domain deallocation.
These tests use signal scoping to make it simple. They are not in the
scoped_signal_test.c file but in the new dedicated audit_test.c file.
Tests are run with audit filters to ensure the audit records come from
the test program. Moreover, because there can only be one audit
process, tests would failed if run in parallel. Because of audit
limitations, tests can only be run in the initial namespace.
The audit test helpers were inspired by libaudit and
tools/testing/selftests/net/netfilter/audit_logread.c
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Phil Sutter <phil@nwl.cc>
Link: https://lore.kernel.org/r/20250320190717.2287696-23-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add the base_test's restrict_self_fd_flags tests to align with previous
restrict_self_fd tests but with the new
LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF flag.
Add the restrict_self_flags tests to check that
LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF,
LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON, and
LANDLOCK_RESTRICT_SELF_LOG_SUBDOMAINS_OFF are valid but not the next
bit. Some checks are similar to restrict_self_checks_ordering's ones.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-22-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
To align with fs_test's layout1.inval and layout0.proc_nsfs which test
EBADFD for landlock_add_rule(2), create a new base_test's
restrict_self_fd which test EBADFD for landlock_restrict_self(2).
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-21-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Most of the time we want to log denied access because they should not
happen and such information helps diagnose issues. However, when
sandboxing processes that we know will try to access denied resources
(e.g. unknown, bogus, or malicious binary), we might want to not log
related access requests that might fill up logs.
By default, denied requests are logged until the task call execve(2).
If the LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF flag is set, denied
requests will not be logged for the same executed file.
If the LANDLOCK_RESTRICT_SELF_LOG_NEW_EXEC_ON flag is set, denied
requests from after an execve(2) call will be logged.
The rationale is that a program should know its own behavior, but not
necessarily the behavior of other programs.
Because LANDLOCK_RESTRICT_SELF_LOG_SAME_EXEC_OFF is set for a specific
Landlock domain, it makes it possible to selectively mask some access
requests that would be logged by a parent domain, which might be handy
for unprivileged processes to limit logs. However, system
administrators should still use the audit filtering mechanism. There is
intentionally no audit nor sysctl configuration to re-enable these logs.
This is delegated to the user space program.
Increment the Landlock ABI version to reflect this interface change.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-18-mic@digikod.net
[mic: Rename variables and fix __maybe_unused]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Landlock IDs can be generated to uniquely identify Landlock objects.
For now, only Landlock domains get an ID at creation time. These IDs
map to immutable domain hierarchies.
Landlock IDs have important properties:
- They are unique during the lifetime of the running system thanks to
the 64-bit values: at worse, 2^60 - 2*2^32 useful IDs.
- They are always greater than 2^32 and must then be stored in 64-bit
integer types.
- The initial ID (at boot time) is randomly picked between 2^32 and
2^33, which limits collisions in logs across different boots.
- IDs are sequential, which enables users to order them.
- IDs may not be consecutive but increase with a random 2^4 step, which
limits side channels.
Such IDs can be exposed to unprivileged processes, even if it is not the
case with this audit patch series. The domain IDs will be useful for
user space to identify sandboxes and get their properties.
These Landlock IDs are more secure that other absolute kernel IDs such
as pipe's inodes which rely on a shared global counter.
For checkpoint/restore features (i.e. CRIU), we could easily implement a
privileged interface (e.g. sysfs) to set the next ID counter.
IDR/IDA are not used because we only need a bijection from Landlock
objects to Landlock IDs, and we must not recycle IDs. This enables us
to identify all Landlock objects during the lifetime of the system (e.g.
in logs), but not to access an object from an ID nor know if an ID is
assigned. Using a counter is simpler, it scales (i.e. avoids growing
memory footprint), and it does not require locking. We'll use proper
file descriptors (with IDs used as inode numbers) to access Landlock
objects.
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250320190717.2287696-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The new signal_scoping_thread_setuid tests check that the libc's
setuid() function works as expected even when a thread is sandboxed with
scoped signal restrictions.
Before the signal scoping fix, this test would have failed with the
setuid() call:
[pid 65] getpid() = 65
[pid 65] tgkill(65, 66, SIGRT_1) = -1 EPERM (Operation not permitted)
[pid 65] futex(0x40a66cdc, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 65] setuid(1001) = 0
After the fix, tgkill(2) is successfully leveraged to synchronize
credentials update across threads:
[pid 65] getpid() = 65
[pid 65] tgkill(65, 66, SIGRT_1) = 0
[pid 66] <... read resumed>0x40a65eb7, 1) = ? ERESTARTSYS (To be restarted if SA_RESTART is set)
[pid 66] --- SIGRT_1 {si_signo=SIGRT_1, si_code=SI_TKILL, si_pid=65, si_uid=1000} ---
[pid 66] getpid() = 65
[pid 66] setuid(1001) = 0
[pid 66] futex(0x40a66cdc, FUTEX_WAKE_PRIVATE, 1) = 0
[pid 66] rt_sigreturn({mask=[]}) = 0
[pid 66] read(3, <unfinished ...>
[pid 65] setuid(1001) = 0
Test coverage for security/landlock is 92.9% of 1137 lines according to
gcc/gcov-14.
Fixes: c899496501 ("selftests/landlock: Test signal scoping for threads")
Cc: Günther Noack <gnoack@google.com>
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-8-mic@digikod.net
[mic: Update test coverage]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Split signal_scoping_threads tests into signal_scoping_thread_before
and signal_scoping_thread_after.
Use local variables for thread synchronization. Fix exported function.
Replace some asserts with expects.
Fixes: c899496501 ("selftests/landlock: Test signal scoping for threads")
Cc: Günther Noack <gnoack@google.com>
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-7-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Because Linux credentials are managed per thread, user space relies on
some hack to synchronize credential update across threads from the same
process. This is required by the Native POSIX Threads Library and
implemented by set*id(2) wrappers and libcap(3) to use tgkill(2) to
synchronize threads. See nptl(7) and libpsx(3). Furthermore, some
runtimes like Go do not enable developers to have control over threads
[1].
To avoid potential issues, and because threads are not security
boundaries, let's relax the Landlock (optional) signal scoping to always
allow signals sent between threads of the same process. This exception
is similar to the __ptrace_may_access() one.
hook_file_set_fowner() now checks if the target task is part of the same
process as the caller. If this is the case, then the related signal
triggered by the socket will always be allowed.
Scoping of abstract UNIX sockets is not changed because kernel objects
(e.g. sockets) should be tied to their creator's domain at creation
time.
Note that creating one Landlock domain per thread puts each of these
threads (and their future children) in their own scope, which is
probably not what users expect, especially in Go where we do not control
threads. However, being able to drop permissions on all threads should
not be restricted by signal scoping. We are working on a way to make it
possible to atomically restrict all threads of a process with the same
domain [2].
Add erratum for signal scoping.
Closes: https://github.com/landlock-lsm/go-landlock/issues/36
Fixes: 54a6e6bbf3 ("landlock: Add signal scoping")
Fixes: c899496501 ("selftests/landlock: Test signal scoping for threads")
Depends-on: 26f204380a ("fs: Fix file_set_fowner LSM hook inconsistencies")
Link: https://pkg.go.dev/kernel.org/pub/linux/libs/security/libcap/psx [1]
Link: https://github.com/landlock-lsm/linux/issues/2 [2]
Cc: Günther Noack <gnoack@google.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Tahera Fahimi <fahimitahera@gmail.com>
Cc: stable@vger.kernel.org
Acked-by: Christian Brauner <brauner@kernel.org>
Link: https://lore.kernel.org/r/20250318161443.279194-6-mic@digikod.net
[mic: Add extra pointer check and RCU guard, and ease backport]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
For PCITEST_MSI we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSI, since we want to test if MSI works.
For PCITEST_MSIX we really want to set PCITEST_SET_IRQTYPE explicitly
to PCITEST_IRQ_TYPE_MSIX, since we want to test if MSI works.
For PCITEST_LEGACY_IRQ we really want to set PCITEST_SET_IRQTYPE
explicitly to PCITEST_IRQ_TYPE_INTX, since we want to test if INTx
works.
However, for PCITEST_WRITE, PCITEST_READ, PCITEST_COPY, we really don't
care which IRQ type that is used, we just want to use a IRQ type that is
supported by the EPC.
The old behavior was to always use MSI for PCITEST_WRITE, PCITEST_READ,
PCITEST_COPY, was to always set IRQ type to MSI before doing the actual
test, however, there are EPC drivers that do not support MSI.
Add a new PCITEST_IRQ_TYPE_AUTO, that will use the CAPS register to see
which IRQ types the endpoint supports, and use one of the supported IRQ
types.
For backwards compatibility, if the endpoint does not expose any supported
IRQ type in the CAPS register, simply fallback to using MSI, as it was
unconditionally done before.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-16-cassel@kernel.org
Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like what
I did last cycle for the CRC32 and CRC-T10DIF library functions.
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme.
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme.
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since they
are no longer needed there.
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect.
- Add kunit test cases for crc64_nvme and crc7.
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c().
- Remove unnecessary prompts from some of the CRC kconfig options.
- Further optimize the x86 crc32c code.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCZ+CGGhQcZWJpZ2dlcnNA
Z29vZ2xlLmNvbQAKCRDzXCl4vpKOK3wRAP4tbnzawUmlIHIF0hleoADXehUgAhMt
NZn15mGvyiuwIQEA8W9qvnLdFXZkdxhxAEvDDFjyrRauL6eGtr/GvCx4AQY=
=wmKG
-----END PGP SIGNATURE-----
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
"Another set of improvements to the kernel's CRC (cyclic redundancy
check) code:
- Rework the CRC64 library functions to be directly optimized, like
what I did last cycle for the CRC32 and CRC-T10DIF library
functions
- Rewrite the x86 PCLMULQDQ-optimized CRC code, and add VPCLMULQDQ
support and acceleration for crc64_be and crc64_nvme
- Rewrite the riscv Zbc-optimized CRC code, and add acceleration for
crc_t10dif, crc64_be, and crc64_nvme
- Remove crc_t10dif and crc64_rocksoft from the crypto API, since
they are no longer needed there
- Rename crc64_rocksoft to crc64_nvme, as the old name was incorrect
- Add kunit test cases for crc64_nvme and crc7
- Eliminate redundant functions for calculating the Castagnoli CRC32,
settling on just crc32c()
- Remove unnecessary prompts from some of the CRC kconfig options
- Further optimize the x86 crc32c code"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (36 commits)
x86/crc: drop the avx10_256 functions and rename avx10_512 to avx512
lib/crc: remove unnecessary prompt for CONFIG_CRC64
lib/crc: remove unnecessary prompt for CONFIG_LIBCRC32C
lib/crc: remove unnecessary prompt for CONFIG_CRC8
lib/crc: remove unnecessary prompt for CONFIG_CRC7
lib/crc: remove unnecessary prompt for CONFIG_CRC4
lib/crc7: unexport crc7_be_syndrome_table
lib/crc_kunit.c: update comment in crc_benchmark()
lib/crc_kunit.c: add test and benchmark for crc7_be()
x86/crc32: optimize tail handling for crc32c short inputs
riscv/crc64: add Zbc optimized CRC64 functions
riscv/crc-t10dif: add Zbc optimized CRC-T10DIF function
riscv/crc32: reimplement the CRC32 functions using new template
riscv/crc: add "template" for Zbc optimized CRC functions
x86/crc: add ANNOTATE_NOENDBR to suppress objtool warnings
x86/crc32: improve crc32c_arch() code generation with clang
x86/crc64: implement crc64_be and crc64_nvme using new template
x86/crc-t10dif: implement crc_t10dif using new template
x86/crc32: implement crc32_le using new template
x86/crc: add "template" for [V]PCLMULQDQ based CRC functions
...
* Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
* Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
* Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
* Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
* Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
* pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
* Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
* Remove unnecessary header include path
* Assume constant PGD during VM context switch
* Add perf events support for guest VM
RISC-V:
* Disable the kernel perf counter during configure
* KVM selftests improvements for PMU
* Fix warning at the time of KVM module removal
x86:
* Add support for aging of SPTEs without holding mmu_lock. Not taking mmu_lock
allows multiple aging actions to run in parallel, and more importantly avoids
stalling vCPUs. This includes an implementation of per-rmap-entry locking;
aging the gfn is done with only a per-rmap single-bin spinlock taken, whereas
locking an rmap for write requires taking both the per-rmap spinlock and
the mmu_lock.
Note that this decreases slightly the accuracy of accessed-page information,
because changes to the SPTE outside aging might not use atomic operations
even if they could race against a clear of the Accessed bit. This is
deliberate because KVM and mm/ tolerate false positives/negatives for
accessed information, and testing has shown that reducing the latency of
aging is far more beneficial to overall system performance than providing
"perfect" young/old information.
* Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
* Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
* Drop "support" for async page faults for protected guests that do not set
SEND_ALWAYS (i.e. that only want async page faults at CPL3)
* Bring a bit of sanity to x86's VM teardown code, which has accumulated
a lot of cruft over the years. Particularly, destroy vCPUs before
the MMU, despite the latter being a VM-wide operation.
* Add common secure TSC infrastructure for use within SNP and in the
future TDX
* Block KVM_CAP_SYNC_REGS if guest state is protected. It does not make
sense to use the capability if the relevant registers are not
available for reading or writing.
* Don't take kvm->lock when iterating over vCPUs in the suspend notifier to
fix a largely theoretical deadlock.
* Use the vCPU's actual Xen PV clock information when starting the Xen timer,
as the cached state in arch.hv_clock can be stale/bogus.
* Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across different
PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as KVM's suspend
notifier only accounts for kvmclock, and there's no evidence that the
flag is actually supported by Xen guests.
* Clean up the per-vCPU "cache" of its reference pvclock, and instead only
track the vCPU's TSC scaling (multipler+shift) metadata (which is moderately
expensive to compute, and rarely changes for modern setups).
* Don't write to the Xen hypercall page on MSR writes that are initiated by
the host (userspace or KVM) to fix a class of bugs where KVM can write to
guest memory at unexpected times, e.g. during vCPU creation if userspace has
set the Xen hypercall MSR index to collide with an MSR that KVM emulates.
* Restrict the Xen hypercall MSR index to the unofficial synthetic range to
reduce the set of possible collisions with MSRs that are emulated by KVM
(collisions can still happen as KVM emulates Hyper-V MSRs, which also reside
in the synthetic range).
* Clean up and optimize KVM's handling of Xen MSR writes and xen_hvm_config.
* Update Xen TSC leaves during CPUID emulation instead of modifying the CPUID
entries when updating PV clocks; there is no guarantee PV clocks will be
updated between TSC frequency changes and CPUID emulation, and guest reads
of the TSC leaves should be rare, i.e. are not a hot path.
x86 (Intel):
* Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and thus
modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1.
* Pass XFD_ERR as the payload when injecting #NM, as a preparatory step
for upcoming FRED virtualization support.
* Decouple the EPT entry RWX protection bit macros from the EPT Violation
bits, both as a general cleanup and in anticipation of adding support for
emulating Mode-Based Execution Control (MBEC).
* Reject KVM_RUN if userspace manages to gain control and stuff invalid guest
state while KVM is in the middle of emulating nested VM-Enter.
* Add a macro to handle KVM's sanity checks on entry/exit VMCS control pairs
in anticipation of adding sanity checks for secondary exit controls (the
primary field is out of bits).
x86 (AMD):
* Ensure the PSP driver is initialized when both the PSP and KVM modules are
built-in (the initcall framework doesn't handle dependencies).
* Use long-term pins when registering encrypted memory regions, so that the
pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and don't lead to
excessive fragmentation.
* Add macros and helpers for setting GHCB return/error codes.
* Add support for Idle HLT interception, which elides interception if the vCPU
has a pending, unmasked virtual IRQ when HLT is executed.
* Fix a bug in INVPCID emulation where KVM fails to check for a non-canonical
address.
* Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is invalid, e.g.
because the vCPU was "destroyed" via SNP's AP Creation hypercall.
* Reject SNP AP Creation if the requested SEV features for the vCPU don't
match the VM's configured set of features.
Selftests:
* Fix again the Intel PMU counters test; add a data load and do CLFLUSH{OPT} on the data
instead of executing code. The theory is that modern Intel CPUs have
learned new code prefetching tricks that bypass the PMU counters.
* Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
* Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
* Fix a few minor bugs related to handling of stats FDs.
* Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
* Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfcTkEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMnQAf/cPx72hJOdNy4Qrm8M33YLXVRVV00
yEZ8eN8TWdOclr0ltE/w/ELGh/qS4CU8pjURAk0A6lPioU+mdcTn3dPEqMDMVYom
uOQ2lusEHw0UuSnGZSEjvZJsE/Ro2NSAsHIB6PWRqig1ZBPJzyu0frce34pMpeQH
diwriJL9lKPAhBWXnUQ9BKoi1R0P5OLW9ahX4SOWk7cAFg4DLlDE66Nqf6nKqViw
DwEucTiUEg5+a3d93gihdD4JNl+fb3vI2erxrMxjFjkacl0qgqRu3ei3DG0MfdHU
wNcFSG5B1n0OECKxr80lr1Ip1KTVNNij0Ks+w6Gc6lSg9c4PptnNkfLK3A==
=nnCN
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU
implementations where a VM may run, addressing a longstanding issue
of guest CPU errata awareness in big-little systems and
cross-implementation VM migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
LoongArch:
- Remove unnecessary header include path
- Assume constant PGD during VM context switch
- Add perf events support for guest VM
RISC-V:
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
x86:
- Add support for aging of SPTEs without holding mmu_lock.
Not taking mmu_lock allows multiple aging actions to run in
parallel, and more importantly avoids stalling vCPUs. This includes
an implementation of per-rmap-entry locking; aging the gfn is done
with only a per-rmap single-bin spinlock taken, whereas locking an
rmap for write requires taking both the per-rmap spinlock and the
mmu_lock.
Note that this decreases slightly the accuracy of accessed-page
information, because changes to the SPTE outside aging might not
use atomic operations even if they could race against a clear of
the Accessed bit.
This is deliberate because KVM and mm/ tolerate false
positives/negatives for accessed information, and testing has shown
that reducing the latency of aging is far more beneficial to
overall system performance than providing "perfect" young/old
information.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction,
to coalesce updates when multiple pieces of vCPU state are
changing, e.g. as part of a nested transition
- Fix a variety of nested emulation bugs, and add VMX support for
synthesizing nested VM-Exit on interception (instead of injecting
#UD into L2)
- Drop "support" for async page faults for protected guests that do
not set SEND_ALWAYS (i.e. that only want async page faults at CPL3)
- Bring a bit of sanity to x86's VM teardown code, which has
accumulated a lot of cruft over the years. Particularly, destroy
vCPUs before the MMU, despite the latter being a VM-wide operation
- Add common secure TSC infrastructure for use within SNP and in the
future TDX
- Block KVM_CAP_SYNC_REGS if guest state is protected. It does not
make sense to use the capability if the relevant registers are not
available for reading or writing
- Don't take kvm->lock when iterating over vCPUs in the suspend
notifier to fix a largely theoretical deadlock
- Use the vCPU's actual Xen PV clock information when starting the
Xen timer, as the cached state in arch.hv_clock can be stale/bogus
- Fix a bug where KVM could bleed PVCLOCK_GUEST_STOPPED across
different PV clocks; restrict PVCLOCK_GUEST_STOPPED to kvmclock, as
KVM's suspend notifier only accounts for kvmclock, and there's no
evidence that the flag is actually supported by Xen guests
- Clean up the per-vCPU "cache" of its reference pvclock, and instead
only track the vCPU's TSC scaling (multipler+shift) metadata (which
is moderately expensive to compute, and rarely changes for modern
setups)
- Don't write to the Xen hypercall page on MSR writes that are
initiated by the host (userspace or KVM) to fix a class of bugs
where KVM can write to guest memory at unexpected times, e.g.
during vCPU creation if userspace has set the Xen hypercall MSR
index to collide with an MSR that KVM emulates
- Restrict the Xen hypercall MSR index to the unofficial synthetic
range to reduce the set of possible collisions with MSRs that are
emulated by KVM (collisions can still happen as KVM emulates
Hyper-V MSRs, which also reside in the synthetic range)
- Clean up and optimize KVM's handling of Xen MSR writes and
xen_hvm_config
- Update Xen TSC leaves during CPUID emulation instead of modifying
the CPUID entries when updating PV clocks; there is no guarantee PV
clocks will be updated between TSC frequency changes and CPUID
emulation, and guest reads of the TSC leaves should be rare, i.e.
are not a hot path
x86 (Intel):
- Fix a bug where KVM unnecessarily reads XFD_ERR from hardware and
thus modifies the vCPU's XFD_ERR on a #NM due to CR0.TS=1
- Pass XFD_ERR as the payload when injecting #NM, as a preparatory
step for upcoming FRED virtualization support
- Decouple the EPT entry RWX protection bit macros from the EPT
Violation bits, both as a general cleanup and in anticipation of
adding support for emulating Mode-Based Execution Control (MBEC)
- Reject KVM_RUN if userspace manages to gain control and stuff
invalid guest state while KVM is in the middle of emulating nested
VM-Enter
- Add a macro to handle KVM's sanity checks on entry/exit VMCS
control pairs in anticipation of adding sanity checks for secondary
exit controls (the primary field is out of bits)
x86 (AMD):
- Ensure the PSP driver is initialized when both the PSP and KVM
modules are built-in (the initcall framework doesn't handle
dependencies)
- Use long-term pins when registering encrypted memory regions, so
that the pages are migrated out of MIGRATE_CMA/ZONE_MOVABLE and
don't lead to excessive fragmentation
- Add macros and helpers for setting GHCB return/error codes
- Add support for Idle HLT interception, which elides interception if
the vCPU has a pending, unmasked virtual IRQ when HLT is executed
- Fix a bug in INVPCID emulation where KVM fails to check for a
non-canonical address
- Don't attempt VMRUN for SEV-ES+ guests if the vCPU's VMSA is
invalid, e.g. because the vCPU was "destroyed" via SNP's AP
Creation hypercall
- Reject SNP AP Creation if the requested SEV features for the vCPU
don't match the VM's configured set of features
Selftests:
- Fix again the Intel PMU counters test; add a data load and do
CLFLUSH{OPT} on the data instead of executing code. The theory is
that modern Intel CPUs have learned new code prefetching tricks
that bypass the PMU counters
- Fix a flaw in the Intel PMU counters test where it asserts that an
event is counting correctly without actually knowing what the event
counts on the underlying hardware
- Fix a variety of flaws, bugs, and false failures/passes
dirty_log_test, and improve its coverage by collecting all dirty
entries on each iteration
- Fix a few minor bugs related to handling of stats FDs
- Add infrastructure to make vCPU and VM stats FDs available to tests
by default (open the FDs during VM/vCPU creation)
- Relax an assertion on the number of HLT exits in the xAPIC IPI test
when running on a CPU that supports AMD's Idle HLT (which elides
interception of HLT if a virtual IRQ is pending and unmasked)"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (216 commits)
RISC-V: KVM: Optimize comments in kvm_riscv_vcpu_isa_disable_allowed
RISC-V: KVM: Teardown riscv specific bits after kvm_exit
LoongArch: KVM: Register perf callbacks for guest
LoongArch: KVM: Implement arch-specific functions for guest perf
LoongArch: KVM: Add stub for kvm_arch_vcpu_preempted_in_kernel()
LoongArch: KVM: Remove PGD saving during VM context switch
LoongArch: KVM: Remove unnecessary header include path
KVM: arm64: Tear down vGIC on failed vCPU creation
KVM: arm64: PMU: Reload when resetting
KVM: arm64: PMU: Reload when user modifies registers
KVM: arm64: PMU: Fix SET_ONE_REG for vPMC regs
KVM: arm64: PMU: Assume PMU presence in pmu-emul.c
KVM: arm64: PMU: Set raw values from user to PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
KVM: arm64: Create each pKVM hyp vcpu after its corresponding host vcpu
KVM: arm64: Factor out pKVM hyp vcpu creation to separate function
KVM: arm64: Initialize HCRX_EL2 traps in pKVM
KVM: arm64: Factor out setting HCRX_EL2 traps into separate function
KVM: x86: block KVM_CAP_SYNC_REGS if guest state is protected
KVM: x86: Add infrastructure for secure TSC
KVM: x86: Push down setting vcpu.arch.user_set_tsc
...
Perf and PMUs:
- Support for the "Rainier" CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It adds
a generic topology_is_primary_thread() function overridden by x86 and
powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between shared
and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings and
user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores
-----BEGIN PGP SIGNATURE-----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=Kc9c
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"Nothing major this time around.
Apart from the usual perf/PMU updates, some page table cleanups, the
notable features are average CPU frequency based on the AMUv1
counters, CONFIG_HOTPLUG_SMT and MOPS instructions (memcpy/memset) in
the uaccess routines.
Perf and PMUs:
- Support for the 'Rainier' CPU PMU from Arm
- Preparatory driver changes and cleanups that pave the way for BRBE
support
- Support for partial virtualisation of the Apple-M1 PMU
- Support for the second event filter in Arm CSPMU designs
- Minor fixes and cleanups (CMN and DWC PMUs)
- Enable EL2 requirements for FEAT_PMUv3p9
Power, CPU topology:
- Support for AMUv1-based average CPU frequency
- Run-time SMT control wired up for arm64 (CONFIG_HOTPLUG_SMT). It
adds a generic topology_is_primary_thread() function overridden by
x86 and powerpc
New(ish) features:
- MOPS (memcpy/memset) support for the uaccess routines
Security/confidential compute:
- Fix the DMA address for devices used in Realms with Arm CCA. The
CCA architecture uses the address bit to differentiate between
shared and private addresses
- Spectre-BHB: assume CPUs Linux doesn't know about vulnerable by
default
Memory management clean-ups:
- Drop the P*D_TABLE_BIT definition in preparation for 128-bit PTEs
- Some minor page table accessor clean-ups
- PIE/POE (permission indirection/overlay) helpers clean-up
Kselftests:
- MTE: skip hugetlb tests if MTE is not supported on such mappings
and user correct naming for sync/async tag checking modes
Miscellaneous:
- Add a PKEY_UNRESTRICTED definition as 0 to uapi (toolchain people
request)
- Sysreg updates for new register fields
- CPU type info for some Qualcomm Kryo cores"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (72 commits)
arm64: mm: Don't use %pK through printk
perf/arm_cspmu: Fix missing io.h include
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64: Kconfig: Enable HOTPLUG_SMT
arm64: topology: Support SMT control on ACPI based system
arch_topology: Support SMT control for OF based system
cpu/SMT: Provide a default topology_is_primary_thread()
arm64/mm: Define PTDESC_ORDER
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
arm64/kernel: Always use level 2 or higher for early mappings
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
...
* arm64/for-next/perf:
perf/arm_cspmu: Fix missing io.h include
perf/arm_cspmu: Add PMEVFILT2R support
perf/arm_cspmu: Generalise event filtering
perf/arm_cspmu: Move register definitons to header
drivers/perf: apple_m1: Support host/guest event filtering
drivers/perf: apple_m1: Refactor event select/filter configuration
perf/dwc_pcie: fix duplicate pci_dev devices
perf/dwc_pcie: fix some unreleased resources
perf/arm-cmn: Minor event type housekeeping
perf: arm_pmu: Move PMUv3-specific data
perf: apple_m1: Don't disable counter in m1_pmu_enable_event()
perf: arm_v7_pmu: Don't disable counter in (armv7|krait_|scorpion_)pmu_enable_event()
perf: arm_v7_pmu: Drop obvious comments for enabling/disabling counters and interrupts
perf: arm_pmuv3: Don't disable counter in armv8pmu_enable_event()
perf: arm_pmu: Don't disable counter in armpmu_add()
perf: arm_pmuv3: Call kvm_vcpu_pmu_resync_el0() before enabling counters
perf: arm_pmuv3: Add support for ARM Rainier PMU
* for-next/amuv1-avg-freq:
: Add support for AArch64 AMUv1-based average freq
arm64: Utilize for_each_cpu_wrap for reference lookup
arm64: Update AMU-based freq scale factor on entering idle
arm64: Provide an AMU-based version of arch_freq_get_on_cpu
cpufreq: Introduce an optional cpuinfo_avg_freq sysfs entry
cpufreq: Allow arch_freq_get_on_cpu to return an error
arch_topology: init capacity_freq_ref to 0
* for-next/pkey_unrestricted:
: mm/pkey: Add PKEY_UNRESTRICTED macro
selftest/powerpc/mm/pkey: fix build-break introduced by commit 00894c3fc9
selftests/powerpc: Use PKEY_UNRESTRICTED macro
selftests/mm: Use PKEY_UNRESTRICTED macro
mm/pkey: Add PKEY_UNRESTRICTED macro
* for-next/sysreg:
: arm64 sysreg updates
arm64/sysreg: Enforce whole word match for open/close tokens
arm64/sysreg: Fix unbalanced closing block
arm64/sysreg: Add register fields for HFGWTR2_EL2
arm64/sysreg: Add register fields for HFGRTR2_EL2
arm64/sysreg: Add register fields for HFGITR2_EL2
arm64/sysreg: Add register fields for HDFGWTR2_EL2
arm64/sysreg: Add register fields for HDFGRTR2_EL2
arm64/sysreg: Update register fields for ID_AA64MMFR0_EL1
* for-next/misc:
: Miscellaneous arm64 patches
arm64: mm: Don't use %pK through printk
arm64/fpsimd: Remove unused declaration fpsimd_kvm_prepare()
* for-next/pgtable-cleanups:
: arm64 pgtable accessors cleanup
arm64/mm: Define PTDESC_ORDER
arm64/kernel: Always use level 2 or higher for early mappings
arm64/hugetlb: Consistently use pud_sect_supported()
arm64/mm: Convert __pte_to_phys() and __phys_to_pte_val() as functions
* for-next/kselftest:
: arm64 kselftest updates
kselftest/arm64: mte: Skip the hugetlb tests if MTE not supported on such mappings
kselftest/arm64: mte: Use the correct naming for tag check modes in check_hugetlb_options.c
* for-next/uaccess-mops:
: Implement the uaccess memory copy/set using MOPS instructions
arm64: lib: Use MOPS for usercopy routines
arm64: mm: Handle PAN faults on uaccess CPY* instructions
arm64: extable: Add fixup handling for uaccess CPY* instructions
* for-next/pie-poe-cleanup:
: PIE/POE helpers cleanup
arm64/sysreg: Move POR_EL0_INIT to asm/por.h
arm64/sysreg: Rename POE_RXW to POE_RWX
arm64/sysreg: Improve PIR/POR helpers
* for-next/cputype-kryo:
: Add cputype info for some Qualcomm Kryo cores
arm64: cputype: Add comments about Qualcomm Kryo 5XX and 6XX cores
arm64: cputype: Add QCOM_CPU_PART_KRYO_3XX_GOLD
* for-next/cca-dma-address:
: Fix DMA address for devices used in realms with Arm CCA
arm64: realm: Use aliased addresses for device DMA to shared buffers
dma: Introduce generic dma_addr_*crypted helpers
dma: Fix encryption bit clearing for dma_to_phys
* for-next/drop-pxd_table_bit:
: Drop the arm64 PXD_TABLE_BIT (clean-up in preparation for 128-bit PTEs)
arm64/mm: Drop PXD_TABLE_BIT
arm64/mm: Check pmd_table() in pmd_trans_huge()
arm64/mm: Check PUD_TYPE_TABLE in pud_bad()
arm64/mm: Check PXD_TYPE_TABLE in [p4d|pgd]_bad()
arm64/mm: Clear PXX_TYPE_MASK and set PXD_TYPE_SECT in [pmd|pud]_mkhuge()
arm64/mm: Clear PXX_TYPE_MASK in mk_[pmd|pud]_sect_prot()
arm64/ptdump: Test PMD_TYPE_MASK for block mapping
KVM: arm64: ptdump: Test PMD_TYPE_MASK for block mapping
* for-next/spectre-bhb-assume-vulnerable:
: Rework Spectre BHB mitigations to not assume "safe"
arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists
arm64: cputype: Add MIDR_CORTEX_A76AE
arm64: errata: Add KRYO 2XX/3XX/4XX silver cores to Spectre BHB safe list
arm64: errata: Assume that unknown CPUs _are_ vulnerable to Spectre BHB
arm64: errata: Add QCOM_KRYO_4XX_GOLD to the spectre_bhb_k24_list
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance effort
and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts and
implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system timekeeping
accessors, which was good enough at the time when it was designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related to
system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
-----BEGIN PGP SIGNATURE-----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=rwei
-----END PGP SIGNATURE-----
Merge tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull VDSO infrastructure updates from Thomas Gleixner:
- Consolidate the VDSO storage
The VDSO data storage and data layout has been largely architecture
specific for historical reasons. That increases the maintenance
effort and causes inconsistencies over and over.
There is no real technical reason for architecture specific layouts
and implementations. The architecture specific details can easily be
integrated into a generic layout, which also reduces the amount of
duplicated code for managing the mappings.
Convert all architectures over to a unified layout and common mapping
infrastructure. This splits the VDSO data layout into subsystem
specific blocks, timekeeping, random and architecture parts, which
provides a better structure and allows to improve and update the
functionalities without conflict and interaction.
- Rework the timekeeping data storage
The current implementation is designed for exposing system
timekeeping accessors, which was good enough at the time when it was
designed.
PTP and Time Sensitive Networking (TSN) change that as there are
requirements to expose independent PTP clocks, which are not related
to system timekeeping.
Replace the monolithic data storage by a structured layout, which
allows to add support for independent PTP clocks on top while reusing
both the data structures and the time accessor implementations.
* tag 'timers-vdso-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (55 commits)
sparc/vdso: Always reject undefined references during linking
x86/vdso: Always reject undefined references during linking
vdso: Rework struct vdso_time_data and introduce struct vdso_clock
vdso: Move architecture related data before basetime data
powerpc/vdso: Prepare introduction of struct vdso_clock
arm64/vdso: Prepare introduction of struct vdso_clock
x86/vdso: Prepare introduction of struct vdso_clock
time/namespace: Prepare introduction of struct vdso_clock
vdso/namespace: Rename timens_setup_vdso_data() to reflect new vdso_clock struct
vdso/vsyscall: Prepare introduction of struct vdso_clock
vdso/gettimeofday: Prepare helper functions for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_coarse() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres_timens() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare do_hres() for introduction of struct vdso_clock
vdso/gettimeofday: Prepare introduction of struct vdso_clock
vdso/helpers: Prepare introduction of struct vdso_clock
vdso/datapage: Define vdso_clock to prepare for multiple PTP clocks
vdso: Make vdso_time_data cacheline aligned
arm64: Make asm/cache.h compatible with vDSO
...
icsk->icsk_timeout can be replaced by icsk->icsk_retransmit_timer.expires
This saves 8 bytes in TCP/DCCP sockets and helps for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250324203607.703850-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a memory ordering issue in posix-timers
Posix-timer lookup is lockless and reevaluates the timer validity under
the timer lock, but the update which validates the timer is not
protected by the timer lock. That allows the store to be reordered
against the initialization stores, so that the lookup side can observe
a partially initialized timer. That's mostly a theoretical problem, but
incorrect nevertheless.
- Fix a long standing inconsistency of the coarse time getters
The coarse time getters read the base time of the current update cycle
without reading the actual hardware clock. NTP frequency adjustment can
set the base time backwards. The fine grained interfaces compensate
this by reading the clock and applying the new conversion factor, but
the coarse grained time getters use the base time directly. That allows
the user to observe time going backwards.
Cure it by always forwarding base time, when NTP changes the frequency
with an immediate step.
- Rework of posix-timer hashing
The posix-timer hash is not scalable and due to the CRIU timer restore
mechanism prone to massive contention on the global hash bucket lock.
Replace the global hash lock with a fine grained per bucket locking
scheme to address that.
- Rework the proc/$PID/timers interface.
/proc/$PID/timers is provided for CRIU to be able to restore a
timer. The printout happens with sighand lock held and interrupts
disabled. That's not required as this can be done with RCU protection
as well.
- Provide a sane mechanism for CRIU to restore a timer ID
CRIU restores timers by creating and deleting them until the kernel
internal per process ID counter reached the requested ID. That's
horribly slow for sparse timer IDs.
Provide a prctl() which allows CRIU to restore a timer with a given
ID. When enabled the ID pointer is used as input pointer to read the
requested ID from user space. When disabled, the normal allocation
scheme (next ID) is active as before. This is backwards compatible for
both kernel and user space.
- Make hrtimer_update_function() less expensive.
The sanity checks are valuable, but expensive for high frequency usage
in io/uring. Make the debug checks conditional and enable them only
when lockdep is enabled.
- Small updates, cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=XUGH
-----END PGP SIGNATURE-----
Merge tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- Fix a memory ordering issue in posix-timers
Posix-timer lookup is lockless and reevaluates the timer validity
under the timer lock, but the update which validates the timer is not
protected by the timer lock. That allows the store to be reordered
against the initialization stores, so that the lookup side can
observe a partially initialized timer. That's mostly a theoretical
problem, but incorrect nevertheless.
- Fix a long standing inconsistency of the coarse time getters
The coarse time getters read the base time of the current update
cycle without reading the actual hardware clock. NTP frequency
adjustment can set the base time backwards. The fine grained
interfaces compensate this by reading the clock and applying the new
conversion factor, but the coarse grained time getters use the base
time directly. That allows the user to observe time going backwards.
Cure it by always forwarding base time, when NTP changes the
frequency with an immediate step.
- Rework of posix-timer hashing
The posix-timer hash is not scalable and due to the CRIU timer
restore mechanism prone to massive contention on the global hash
bucket lock.
Replace the global hash lock with a fine grained per bucket locking
scheme to address that.
- Rework the proc/$PID/timers interface.
/proc/$PID/timers is provided for CRIU to be able to restore a timer.
The printout happens with sighand lock held and interrupts disabled.
That's not required as this can be done with RCU protection as well.
- Provide a sane mechanism for CRIU to restore a timer ID
CRIU restores timers by creating and deleting them until the kernel
internal per process ID counter reached the requested ID. That's
horribly slow for sparse timer IDs.
Provide a prctl() which allows CRIU to restore a timer with a given
ID. When enabled the ID pointer is used as input pointer to read the
requested ID from user space. When disabled, the normal allocation
scheme (next ID) is active as before. This is backwards compatible
for both kernel and user space.
- Make hrtimer_update_function() less expensive.
The sanity checks are valuable, but expensive for high frequency
usage in io/uring. Make the debug checks conditional and enable them
only when lockdep is enabled.
- Small updates, cleanups and improvements
* tag 'timers-core-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits)
selftests/timers: Improve skew_consistency by testing with other clockids
timekeeping: Fix possible inconsistencies in _COARSE clockids
posix-timers: Drop redundant memset() invocation
selftests/timers/posix-timers: Add a test for exact allocation mode
posix-timers: Provide a mechanism to allocate a given timer ID
posix-timers: Dont iterate /proc/$PID/timers with sighand:: Siglock held
posix-timers: Make per process list RCU safe
posix-timers: Avoid false cacheline sharing
posix-timers: Switch to jhash32()
posix-timers: Improve hash table performance
posix-timers: Make signal_struct:: Next_posix_timer_id an atomic_t
posix-timers: Make lock_timer() use guard()
posix-timers: Rework timer removal
posix-timers: Simplify lock/unlock_timer()
posix-timers: Use guards in a few places
posix-timers: Remove SLAB_PANIC from kmem cache
posix-timers: Remove a few paranoid warnings
posix-timers: Cleanup includes
posix-timers: Add cond_resched() to posix_timer_add() search loop
posix-timers: Initialise timer before adding it to the hash table
...
I had to spend some (a lot;) time to understand why pidfd_info_test
(and more) fails with my patch under qemu on my machine ;) Until I
applied the patch below.
I think it is a bad idea to do the things like
#ifndef __NR_clone3
#define __NR_clone3 -1
#endif
because this can hide a problem. My working laptop runs Fedora-23 which
doesn't have __NR_clone3/etc in /usr/include/. So "make" happily succeeds,
but everything fails and it is not clear why.
Link: https://lore.kernel.org/r/20250323174518.GB834@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
This new test makes sure that ftrace can trace a
function that was introduced by a livepatch.
Signed-off-by: Filipe Xavier <felipeaggger@gmail.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250324-ftrace-sftest-livepatch-v3-2-d9d7cc386c75@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Add new ftrace helpers functions cleanup_tracing, trace_function and
check_traced_functions.
Signed-off-by: Filipe Xavier <felipeaggger@gmail.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250324-ftrace-sftest-livepatch-v3-1-d9d7cc386c75@gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
As both client and server print the same test name on failure or pass,
add "[server]" so that it's more obvious from a log which side printed
"ok" or "not ok".
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-5-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, tcp_ao tests have two timeouts: TEST_RETRANSMIT_SEC and
TEST_TIMEOUT_SEC [by default 1 and 5 seconds]. The first one,
TEST_RETRANSMIT_SEC is used for operations that are expected to succeed
in order for a test to pass. It is usually not consumed and exists only
to avoid indefinite test run if the operation didn't complete.
The second one, TEST_RETRANSMIT_SEC exists for the tests that checking
operations, that are expected to fail/timeout. It is shorter as it is
fully consumed, with an expectation that if operation didn't succeed
during that period, it will timeout. And the related test that expects
the timeout is passing. The actual operation failure is then
cross-verified by other means like counters checks.
The issue with TEST_RETRANSMIT_SEC timeout is that 1 second is the exact
initial TCP timeout. So, in case the initial segment gets lost (quite
unlikely on local veth interface between two net namespaces, yet happens
in slow VMs), the retransmission never happens and as a result, the test
is not actually testing the functionality. Which in the end fails
counters checks.
As I want tcp_ao selftests to be fast and finishing in a reasonable
amount of time on manual run, I didn't consider increasing
TEST_RETRANSMIT_SEC.
Rather, initially, BPF_SOCK_OPS_TIMEOUT_INIT looked promising as a lever
to make the initial TCP timeout shorter. But as it's not a socket bpf
attached thing, but sock_ops (attaches to cgroups), the selftests would
have to use libbpf, which I wanted to avoid if not absolutely required.
Instead, use a mixed select() and counters polling mode with the longer
TEST_TIMEOUT_SEC timeout to detect running-away failed tests. It
actually not only allows losing segments and succeeding after
the previous TEST_RETRANSMIT_SEC timeout was consumed, but makes
the tests expecting timeout/failure pass faster.
The only test case taking longer (TEST_TIMEOUT_SEC) now is connect-deny
"wrong snd id", which checks for no key on SYN-ACK for which there is no
counter in the kernel (see tcp_make_synack()). Yet it can be speed up
by poking skpair from the trace event (see trace_tcp_ao_synack_no_key).
Fixes: ed9d09b309 ("selftests/net: Add a test for TCP-AO keys matching")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20241205070656.6ef344d7@kernel.org/
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-4-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are related TCP-MD5 <=> TCP and TCP-MD5 <=> TCP-AO tests
that can benefit from checking the related counters, not only from
validating operations timeouts.
It also prepares the code for introduction of mixed select()+poll mode,
see the follow-up patches.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-3-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename __test_tcp_ao_counters_cmp() into test_assert_counters_ao() and
test_tcp_ao_key_counters_cmp() into test_assert_counters_key() as they
are asserts, rather than just compare functions.
Provide test_cmp_counters() helper, that's going to be used to compare
ao_info and netns counters as a stop condition for polling the sockets.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-2-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before:
># 13145[lib/ftrace-tcp.c:427] trace event filter tcp_ao_key_not_found [2001:db8:1::1:-1 => 2001:db8:254::1:7010, L3index 0, flags: !FS!R!P!., keyid: 100, rnext: 100, maclen: -1, sne: -1] = 1
After:
># 13487[lib/ftrace-tcp.c:427] trace event filter tcp_ao_key_not_found [2001:db8:1::1:-1 => 2001:db8:254::1:7010, L3index 0, flags: S, keyid: 100, rnext: 100, maclen: -1, sne: -1] = 1
For the history, I think the initial format was to emphasize the absence
of flags as well as their presence (!R meant no RST flag). But looking
again, it's just unreadable and hard to understand.
Make it the standard/expected one.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20250319-tcp-ao-selftests-polling-v2-1-da48040153d1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
CONFIG_KPROBES_ON_FTRACE is required for test-kprobe. Skip test-kprobe
when CONFIG_KPROBES_ON_FTRACE is not set. Since some kernel may not have
/proc/config.gz, grep for kprobe_ftrace_ops from /proc/kallsyms to check
whether CONFIG_KPROBES_ON_FTRACE is enabled.
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20250318181518.1055532-1-song@kernel.org
[pmladek@suse.com: Call grep with -q option.]
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Mirsad Todorovac, Randy Dunlap, Thorsten Blum and Zhang Kunbo.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GsK4
-----END PGP SIGNATURE-----
Merge tag 'x86-cleanups-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Miscellaneous x86 cleanups by Arnd Bergmann, Charles Han, Mirsad
Todorovac, Randy Dunlap, Thorsten Blum and Zhang Kunbo"
* tag 'x86-cleanups-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/coco: Replace 'static const cc_mask' with the newly introduced cc_get_mask() function
x86/delay: Fix inconsistent whitespace
selftests/x86/syscall: Fix coccinelle WARNING recommending the use of ARRAY_SIZE()
x86/platform: Fix missing declaration of 'x86_apple_machine'
x86/irq: Fix missing declaration of 'io_apic_irqs'
x86/usercopy: Fix kernel-doc func param name in clean_cache_range()'s description
x86/apic: Use str_disabled_enabled() helper in print_ipi_mode()
- Improve crypto performance by making kernel-mode FPU reliably usable
in softirqs ((Eric Biggers)
- Fully optimize out WARN_ON_FPU() (Eric Biggers)
- Initial steps to support Support Intel APX (Advanced Performance Extensions)
(Chang S. Bae)
- Fix KASAN for arch_dup_task_struct() (Benjamin Berg)
- Refine and simplify the FPU magic number check during signal return
(Chang S. Bae)
- Fix inconsistencies in guest FPU xfeatures (Chao Gao, Stanislav Spassov)
- selftests/x86/xstate: Introduce common code for testing extended states
(Chang S. Bae)
- Misc fixes and cleanups (Borislav Petkov, Colin Ian King, Uros Bizjak)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=U7PR
-----END PGP SIGNATURE-----
Merge tag 'x86-fpu-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86/fpu updates from Ingo Molnar:
- Improve crypto performance by making kernel-mode FPU reliably usable
in softirqs ((Eric Biggers)
- Fully optimize out WARN_ON_FPU() (Eric Biggers)
- Initial steps to support Support Intel APX (Advanced Performance
Extensions) (Chang S. Bae)
- Fix KASAN for arch_dup_task_struct() (Benjamin Berg)
- Refine and simplify the FPU magic number check during signal return
(Chang S. Bae)
- Fix inconsistencies in guest FPU xfeatures (Chao Gao, Stanislav
Spassov)
- selftests/x86/xstate: Introduce common code for testing extended
states (Chang S. Bae)
- Misc fixes and cleanups (Borislav Petkov, Colin Ian King, Uros
Bizjak)
* tag 'x86-fpu-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu/xstate: Fix inconsistencies in guest FPU xfeatures
x86/fpu: Clarify the "xa" symbolic name used in the XSTATE* macros
x86/fpu: Use XSAVE{,OPT,C,S} and XRSTOR{,S} mnemonics in xstate.h
x86/fpu: Improve crypto performance by making kernel-mode FPU reliably usable in softirqs
x86/fpu/xstate: Simplify print_xstate_features()
x86/fpu: Refine and simplify the magic number check during signal return
selftests/x86/xstate: Fix spelling mistake "hader" -> "header"
x86/fpu: Avoid copying dynamic FP state from init_task in arch_dup_task_struct()
vmlinux.lds.h: Remove entry to place init_task onto init_stack
selftests/x86/avx: Add AVX tests
selftests/x86/xstate: Clarify supported xstates
selftests/x86/xstate: Consolidate test invocations into a single entry
selftests/x86/xstate: Introduce signal ABI test
selftests/x86/xstate: Refactor ptrace ABI test
selftests/x86/xstate: Refactor context switching test
selftests/x86/xstate: Enumerate and name xstate components
selftests/x86/xstate: Refactor XSAVE helpers for general use
selftests/x86: Consolidate redundant signal helper functions
x86/fpu: Fix guest FPU state buffer allocation size
x86/fpu: Fully optimize out WARN_ON_FPU()
two locking commits in the locking tree,
part of the locking-core-2025-03-22 pull request. ]
x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid='
(Brendan Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and
related cleanups (Brian Gerst)
- Convert the stackprotector canary to a regular percpu
variable (Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB instruction
(Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation
(Kirill A. Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems,
to support PCI BAR space beyond the 10TiB region
(CONFIG_PCI_P2PDMA=y) (Balbir Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Bootup:
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0
(Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI headers
(Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
(Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking instructions
(Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in nmi_shootdown_cpus()
(Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel,
Artem Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst,
Dan Carpenter, Dr. David Alan Gilbert, H. Peter Anvin,
Ingo Molnar, Josh Poimboeuf, Kevin Brodsky, Mike Rapoport,
Lukas Bulwahn, Maciej Wieczor-Retman, Max Grobecker,
Patryk Wlazlyn, Pawan Gupta, Peter Zijlstra,
Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak,
Vitaly Kuznetsov, Xin Li, liuye.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Dcb3
-----END PGP SIGNATURE-----
Merge tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core x86 updates from Ingo Molnar:
"x86 CPU features support:
- Generate the <asm/cpufeaturemasks.h> header based on build config
(H. Peter Anvin, Xin Li)
- x86 CPUID parsing updates and fixes (Ahmed S. Darwish)
- Introduce the 'setcpuid=' boot parameter (Brendan Jackman)
- Enable modifying CPU bug flags with '{clear,set}puid=' (Brendan
Jackman)
- Utilize CPU-type for CPU matching (Pawan Gupta)
- Warn about unmet CPU feature dependencies (Sohil Mehta)
- Prepare for new Intel Family numbers (Sohil Mehta)
Percpu code:
- Standardize & reorganize the x86 percpu layout and related cleanups
(Brian Gerst)
- Convert the stackprotector canary to a regular percpu variable
(Brian Gerst)
- Add a percpu subsection for cache hot data (Brian Gerst)
- Unify __pcpu_op{1,2}_N() macros to __pcpu_op_N() (Uros Bizjak)
- Construct __percpu_seg_override from __percpu_seg (Uros Bizjak)
MM:
- Add support for broadcast TLB invalidation using AMD's INVLPGB
instruction (Rik van Riel)
- Rework ROX cache to avoid writable copy (Mike Rapoport)
- PAT: restore large ROX pages after fragmentation (Kirill A.
Shutemov, Mike Rapoport)
- Make memremap(MEMREMAP_WB) map memory as encrypted by default
(Kirill A. Shutemov)
- Robustify page table initialization (Kirill A. Shutemov)
- Fix flush_tlb_range() when used for zapping normal PMDs (Jann Horn)
- Clear _PAGE_DIRTY for kernel mappings when we clear _PAGE_RW
(Matthew Wilcox)
KASLR:
- x86/kaslr: Reduce KASLR entropy on most x86 systems, to support PCI
BAR space beyond the 10TiB region (CONFIG_PCI_P2PDMA=y) (Balbir
Singh)
CPU bugs:
- Implement FineIBT-BHI mitigation (Peter Zijlstra)
- speculation: Simplify and make CALL_NOSPEC consistent (Pawan Gupta)
- speculation: Add a conditional CS prefix to CALL_NOSPEC (Pawan
Gupta)
- RFDS: Exclude P-only parts from the RFDS affected list (Pawan
Gupta)
System calls:
- Break up entry/common.c (Brian Gerst)
- Move sysctls into arch/x86 (Joel Granados)
Intel LAM support updates: (Maciej Wieczor-Retman)
- selftests/lam: Move cpu_has_la57() to use cpuinfo flag
- selftests/lam: Skip test if LAM is disabled
- selftests/lam: Test get_user() LAM pointer handling
AMD SMN access updates:
- Add SMN offsets to exclusive region access (Mario Limonciello)
- Add support for debugfs access to SMN registers (Mario Limonciello)
- Have HSMP use SMN through AMD_NODE (Yazen Ghannam)
Power management updates: (Patryk Wlazlyn)
- Allow calling mwait_play_dead with an arbitrary hint
- ACPI/processor_idle: Add FFH state handling
- intel_idle: Provide the default enter_dead() handler
- Eliminate mwait_play_dead_cpuid_hint()
Build system:
- Raise the minimum GCC version to 8.1 (Brian Gerst)
- Raise the minimum LLVM version to 15.0.0 (Nathan Chancellor)
Kconfig: (Arnd Bergmann)
- Add cmpxchg8b support back to Geode CPUs
- Drop 32-bit "bigsmp" machine support
- Rework CONFIG_GENERIC_CPU compiler flags
- Drop configuration options for early 64-bit CPUs
- Remove CONFIG_HIGHMEM64G support
- Drop CONFIG_SWIOTLB for PAE
- Drop support for CONFIG_HIGHPTE
- Document CONFIG_X86_INTEL_MID as 64-bit-only
- Remove old STA2x11 support
- Only allow CONFIG_EISA for 32-bit
Headers:
- Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI and non-UAPI
headers (Thomas Huth)
Assembly code & machine code patching:
- x86/alternatives: Simplify alternative_call() interface (Josh
Poimboeuf)
- x86/alternatives: Simplify callthunk patching (Peter Zijlstra)
- KVM: VMX: Use named operands in inline asm (Josh Poimboeuf)
- x86/hyperv: Use named operands in inline asm (Josh Poimboeuf)
- x86/traps: Cleanup and robustify decode_bug() (Peter Zijlstra)
- x86/kexec: Merge x86_32 and x86_64 code using macros from
<asm/asm.h> (Uros Bizjak)
- Use named operands in inline asm (Uros Bizjak)
- Improve performance by using asm_inline() for atomic locking
instructions (Uros Bizjak)
Earlyprintk:
- Harden early_serial (Peter Zijlstra)
NMI handler:
- Add an emergency handler in nmi_desc & use it in
nmi_shootdown_cpus() (Waiman Long)
Miscellaneous fixes and cleanups:
- by Ahmed S. Darwish, Andy Shevchenko, Ard Biesheuvel, Artem
Bityutskiy, Borislav Petkov, Brendan Jackman, Brian Gerst, Dan
Carpenter, Dr. David Alan Gilbert, H. Peter Anvin, Ingo Molnar,
Josh Poimboeuf, Kevin Brodsky, Mike Rapoport, Lukas Bulwahn, Maciej
Wieczor-Retman, Max Grobecker, Patryk Wlazlyn, Pawan Gupta, Peter
Zijlstra, Philip Redkin, Qasim Ijaz, Rik van Riel, Thomas Gleixner,
Thorsten Blum, Tom Lendacky, Tony Luck, Uros Bizjak, Vitaly
Kuznetsov, Xin Li, liuye"
* tag 'x86-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (211 commits)
zstd: Increase DYNAMIC_BMI2 GCC version cutoff from 4.8 to 11.0 to work around compiler segfault
x86/asm: Make asm export of __ref_stack_chk_guard unconditional
x86/mm: Only do broadcast flush from reclaim if pages were unmapped
perf/x86/intel, x86/cpu: Replace Pentium 4 model checks with VFM ones
perf/x86/intel, x86/cpu: Simplify Intel PMU initialization
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-UAPI headers
x86/headers: Replace __ASSEMBLY__ with __ASSEMBLER__ in UAPI headers
x86/locking/atomic: Improve performance by using asm_inline() for atomic locking instructions
x86/asm: Use asm_inline() instead of asm() in clwb()
x86/asm: Use CLFLUSHOPT and CLWB mnemonics in <asm/special_insns.h>
x86/hweight: Use asm_inline() instead of asm()
x86/hweight: Use ASM_CALL_CONSTRAINT in inline asm()
x86/hweight: Use named operands in inline asm()
x86/stackprotector/64: Only export __ref_stack_chk_guard on CONFIG_SMP
x86/head/64: Avoid Clang < 17 stack protector in startup code
x86/kexec: Merge x86_32 and x86_64 code using macros from <asm/asm.h>
x86/runtime-const: Add the RUNTIME_CONST_PTR assembly macro
x86/cpu/intel: Limit the non-architectural constant_tsc model checks
x86/mm/pat: Replace Intel x86_model checks with VFM ones
x86/cpu/intel: Fix fast string initialization for extended Families
...
[ Merge note, these two commits are identical:
- f3fa0e40df ("sched/clock: Don't define sched_clock_irqtime as static key")
- b9f2b29b94 ("sched: Don't define sched_clock_irqtime as static key")
The first one is a cherry-picked version of the second, and the first one
is already upstream. ]
Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli,
Sebastian Andrzej Siewior)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SuQE
-----END PGP SIGNATURE-----
Merge tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Core & fair scheduler changes:
- Cancel the slice protection of the idle entity (Zihan Zhou)
- Reduce the default slice to avoid tasks getting an extra tick
(Zihan Zhou)
- Force propagating min_slice of cfs_rq when {en,de}queue tasks
(Tianchen Ding)
- Refactor can_migrate_task() to elimate looping (I Hsin Cheng)
- Add unlikey branch hints to several system calls (Colin Ian King)
- Optimize current_clr_polling() on certain architectures (Yujun
Dong)
Deadline scheduler: (Juri Lelli)
- Remove redundant dl_clear_root_domain call
- Move dl_rebuild_rd_accounting to cpuset.h
Uclamp:
- Use the uclamp_is_used() helper instead of open-coding it (Xuewen
Yan)
- Optimize sched_uclamp_used static key enabling (Xuewen Yan)
Scheduler topology support: (Juri Lelli)
- Ignore special tasks when rebuilding domains
- Add wrappers for sched_domains_mutex
- Generalize unique visiting of root domains
- Rebuild root domain accounting after every update
- Remove partition_and_rebuild_sched_domains
- Stop exposing partition_sched_domains_locked
RSEQ: (Michael Jeanson)
- Update kernel fields in lockstep with CONFIG_DEBUG_RSEQ=y
- Fix segfault on registration when rseq_cs is non-zero
- selftests: Add rseq syscall errors test
- selftests: Ensure the rseq ABI TLS is actually 1024 bytes
Membarriers:
- Fix redundant load of membarrier_state (Nysal Jan K.A.)
Scheduler debugging:
- Introduce and use preempt_model_str() (Sebastian Andrzej Siewior)
- Make CONFIG_SCHED_DEBUG unconditional (Ingo Molnar)
Fixes and cleanups:
- Always save/restore x86 TSC sched_clock() on suspend/resume
(Guilherme G. Piccoli)
- Misc fixes and cleanups (Thorsten Blum, Juri Lelli, Sebastian
Andrzej Siewior)"
* tag 'sched-core-2025-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
cpuidle, sched: Use smp_mb__after_atomic() in current_clr_polling()
sched/debug: Remove CONFIG_SCHED_DEBUG
sched/debug: Remove CONFIG_SCHED_DEBUG from self-test config files
sched/debug, Documentation: Remove (most) CONFIG_SCHED_DEBUG references from documentation
sched/debug: Make CONFIG_SCHED_DEBUG functionality unconditional
sched/debug: Make 'const_debug' tunables unconditional __read_mostly
sched/debug: Change SCHED_WARN_ON() to WARN_ON_ONCE()
rseq/selftests: Fix namespace collision with rseq UAPI header
include/{topology,cpuset}: Move dl_rebuild_rd_accounting to cpuset.h
sched/topology: Stop exposing partition_sched_domains_locked
cgroup/cpuset: Remove partition_and_rebuild_sched_domains
sched/topology: Remove redundant dl_clear_root_domain call
sched/deadline: Rebuild root domain accounting after every update
sched/deadline: Generalize unique visiting of root domains
sched/topology: Wrappers for sched_domains_mutex
sched/deadline: Ignore special tasks when rebuilding domains
tracing: Use preempt_model_str()
xtensa: Rely on generic printing of preemption model
x86: Rely on generic printing of preemption model
s390: Rely on generic printing of preemption model
...
This pull request contains the following branches:
docs.2025.02.04a:
- Add broken-timing possibility to stallwarn.rst.
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr().
- Document self-propagating callbacks.
- Point call_srcu() to call_rcu() for detailed memory ordering.
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header.
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text.
- Remove references to old grace-period-wait primitives.
srcu.2025.02.05a:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock at the
cost of calling synchronize_rcu() in synchronize_srcu(). Moreover, by
returning the percpu offset of the counter at srcu_read_lock_fast()
time, srcu_read_unlock_fast() can save extra pointer dereferencing,
which makes it faster than srcu_read_{un,}lock_lite().
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible.
torture.2025.02.05a:
- Add get_torture_init_jiffies() to return the start time of the test.
- Add a test_boost_holdoff module parameter to allow delaying boosting
tests when building rcutorture as built-in.
- Add grace period sequence number logging at the beginning and end of
failure/close-call results.
- Switch to hexadecimal for the expedited grace period sequence number
in the rcu_exp_grace_period trace point.
- Make cur_ops->format_gp_seqs take buffer length.
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool.
- Complain when invalid SRCU reader_flavor is specified.
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing.
misc.2025.03.04a:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing.
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes().
- Fix get_state_synchronize_rcu_full() GP-start detection.
- Move RCU Tasks self-tests to core_initcall().
- Print segment lengths in show_rcu_nocb_gp_state().
- Make RCU watch ct_kernel_exit_state() warning.
- Flush console log from kernel_power_off().
- rcutorture: Allow a negative value for nfakewriters.
- rcu: Update TREE05.boot to test normal synchronize_rcu().
- rcu: Use _full() API to debug synchronize_rcu().
lazypreempt.2025.03.04a: Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs().
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY.
- Update __cond_resched comment about RCU quiescent states.
- Handle unstable rdp in rcu_read_unlock_strict().
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y.
- osnoise: Provide quiescent states.
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination.
- Limit PREEMPT_RCU configurations.
- Make rcutorture senario TREE07 and senario TREE10 use PREEMPT_LAZY=y.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEj5IosQTPz8XU1wRHSXnow7UH+rgFAmfeBLQACgkQSXnow7UH
+rh11Qf/Rt6IZJ/YT/V9Sd+8hMx4O0BMh779pr9cD6mbAG+FDk2Yeva1m8vIdFOb
qId6oc8K/ef2JfFjSn0oHMzQP2D3XUyiJWPNbBDHv/D8Os8GZgjzu8dkxVkSbdbY
OxtvIflbcqFN1JDJfGKZnTEW0/YxGqfnS9b6R7iyyA7SOGQ/WubGOE5qNCqPufc9
zJiP+qTUFYQzCIiPlEJul39o9KboPogbt3QAAQjWmi3utd77ehJnm/15FvAjyau4
uhC2cnGfMY535rQaiaQeBQ/IHIowKripCq0JQFvcUNdyArZM3HOI2x79+2II6ft7
mjHskNODOIJHfW2o1RzQ0yRYAywFIg==
=J+mH
-----END PGP SIGNATURE-----
Merge tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Boqun Feng:
"Documentation:
- Add broken-timing possibility to stallwarn.rst
- Improve discussion of this_cpu_ptr(), add raw_cpu_ptr()
- Document self-propagating callbacks
- Point call_srcu() to call_rcu() for detailed memory ordering
- Add CONFIG_RCU_LAZY delays to call_rcu() kernel-doc header
- Clarify RCU_LAZY and RCU_LAZY_DEFAULT_OFF help text
- Remove references to old grace-period-wait primitives
srcu:
- Introduce srcu_read_{un,}lock_fast(), which is similar to
srcu_read_{un,}lock_lite(): avoid smp_mb()s in lock and unlock
at the cost of calling synchronize_rcu() in synchronize_srcu()
Moreover, by returning the percpu offset of the counter at
srcu_read_lock_fast() time, srcu_read_unlock_fast() can avoid
extra pointer dereferencing, which makes it faster than
srcu_read_{un,}lock_lite()
srcu_read_{un,}lock_fast() are intended to replace
rcu_read_{un,}lock_trace() if possible
RCU torture:
- Add get_torture_init_jiffies() to return the start time of the test
- Add a test_boost_holdoff module parameter to allow delaying
boosting tests when building rcutorture as built-in
- Add grace period sequence number logging at the beginning and end
of failure/close-call results
- Switch to hexadecimal for the expedited grace period sequence
number in the rcu_exp_grace_period trace point
- Make cur_ops->format_gp_seqs take buffer length
- Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
- Complain when invalid SRCU reader_flavor is specified
- Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing, which forces SRCU
uses atomics even when percpu ops are NMI safe, and use the Kconfig
for SRCU lockdep testing
Misc:
- Split rcu_report_exp_cpu_mult() mask parameter and use for tracing
- Remove READ_ONCE() for rdp->gpwrap access in __note_gp_changes()
- Fix get_state_synchronize_rcu_full() GP-start detection
- Move RCU Tasks self-tests to core_initcall()
- Print segment lengths in show_rcu_nocb_gp_state()
- Make RCU watch ct_kernel_exit_state() warning
- Flush console log from kernel_power_off()
- rcutorture: Allow a negative value for nfakewriters
- rcu: Update TREE05.boot to test normal synchronize_rcu()
- rcu: Use _full() API to debug synchronize_rcu()
Make RCU handle PREEMPT_LAZY better:
- Fix header guard for rcu_all_qs()
- rcu: Rename PREEMPT_AUTO to PREEMPT_LAZY
- Update __cond_resched comment about RCU quiescent states
- Handle unstable rdp in rcu_read_unlock_strict()
- Handle quiescent states for PREEMPT_RCU=n, PREEMPT_COUNT=y
- osnoise: Provide quiescent states
- Adjust rcutorture with possible PREEMPT_RCU=n && PREEMPT_COUNT=y
combination
- Limit PREEMPT_RCU configurations
- Make rcutorture senario TREE07 and senario TREE10 use
PREEMPT_LAZY=y"
* tag 'rcu-next-v6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (59 commits)
rcutorture: Make scenario TREE07 build CONFIG_PREEMPT_LAZY=y
rcutorture: Make scenario TREE10 build CONFIG_PREEMPT_LAZY=y
rcu: limit PREEMPT_RCU configurations
rcutorture: Update ->extendables check for lazy preemption
rcutorture: Update rcutorture_one_extend_check() for lazy preemption
osnoise: provide quiescent states
rcu: Use _full() API to debug synchronize_rcu()
rcu: Update TREE05.boot to test normal synchronize_rcu()
rcutorture: Allow a negative value for nfakewriters
Flush console log from kernel_power_off()
context_tracking: Make RCU watch ct_kernel_exit_state() warning
rcu/nocb: Print segment lengths in show_rcu_nocb_gp_state()
rcu-tasks: Move RCU Tasks self-tests to core_initcall()
rcu: Fix get_state_synchronize_rcu_full() GP-start detection
torture: Make SRCU lockdep testing use srcu_read_lock_nmisafe()
srcu: Add FORCE_NEED_SRCU_NMI_SAFE Kconfig for testing
rcutorture: Complain when invalid SRCU reader_flavor is specified
rcutorture: Move RCU_TORTURE_TEST_{CHK_RDR_STATE,LOG_CPU} to bool
rcutorture: Make cur_ops->format_gp_seqs take buffer length
rcutorture: Add ftrace-compatible timestamp to GP# failure/close-call output
...
Changes
-------
* 32bit s390 support
* opendir() and friends
* openat() support
* sscanf() support
* various cleanups
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTg4lxklFHAidmUs57B+h1jyw5bOAUCZ8w24QAKCRDB+h1jyw5b
OIRTAQD1KvUV0qYOKU3xqOiUxDe84DyFv4mgu1iZoqmd0po/CQEAs8HU4XWp4Ls0
tPkcLqlhiVPgwhtipjklW8uy6JcFzAI=
=+Zma
-----END PGP SIGNATURE-----
Merge tag 'nolibc-20250308-for-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull nolibc updates from Paul McKenney:
- 32bit s390 support
- opendir() and friends
- openat() support
- sscanf() support
- various cleanups
[ Paul has just forwarded the pull request from Thomas Weißschuh, so
the tag signature is from Thomas, not Paul - Linus ]
* tag 'nolibc-20250308-for-6.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (26 commits)
tools/nolibc: don't use asm/ UAPI headers
selftests/nolibc: stop testing constructor order
selftests/nolibc: use O_RDONLY flag instead of 0
tools/nolibc: drop outdated example from overview comment
tools/nolibc: process open() vararg as mode_t
tools/nolibc: always use openat(2) instead of open(2)
tools/nolibc: add support for openat(2)
selftests/nolibc: add armthumb configuration
selftests/nolibc: explicitly enable ARM mode
Revert "selftests: kselftest: Fix build failure with NOLIBC"
tools/nolibc: add support for [v]sscanf()
tools/nolibc: add support for 32-bit s390
selftests/nolibc: rename s390 to s390x
selftests/nolibc: only run constructor tests on nolibc
selftests/nolibc: split up architecture list in run-tests.sh
tools/nolibc: add support for directory access
tools/nolibc: add support for sys_llseek()
selftests/nolibc: always keep test kernel configuration up to date
selftests/nolibc: execute defconfig before other targets
selftests/nolibc: drop call to mrproper target
...
- Add mechanism to count and report internal events. This significantly
improves visibility on subtle corner conditions.
- The default idle CPU selection logic is revamped and improved in multiple
ways including being made topology aware.
- sched_ext was disabling ttwu_queue for simplicity, which can be costly
when hardware topology is more complex. Implement
SCX_OPS_ALLOWED_QUEUED_WAKEUP so that BPF schedulers can selectively
enable ttwu_queue.
- tools/sched_ext updates to improve compatibility among others.
- Other misc updates and fixes.
- sched_ext/for-6.14-fixes were pulled a few times to receive prerequisite
fixes and resolve conflicts.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ999Sg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGf/KAQCoMTVOBpQT9gCaCKDOmrVJTwi6boEoV5WnGZzw
PDr0vwEAq36iz4no6Y5THcN/DCx+52IiS0zuhPy3rBZVo11TMgU=
=iQ+A
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext updates from Tejun Heo:
- Add mechanism to count and report internal events. This significantly
improves visibility on subtle corner conditions.
- The default idle CPU selection logic is revamped and improved in
multiple ways including being made topology aware.
- sched_ext was disabling ttwu_queue for simplicity, which can be
costly when hardware topology is more complex. Implement
SCX_OPS_ALLOWED_QUEUED_WAKEUP so that BPF schedulers can selectively
enable ttwu_queue.
- tools/sched_ext updates to improve compatibility among others.
- Other misc updates and fixes.
- sched_ext/for-6.14-fixes were pulled a few times to receive
prerequisite fixes and resolve conflicts.
* tag 'sched_ext-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext: (42 commits)
sched_ext: idle: Refactor scx_select_cpu_dfl()
sched_ext: idle: Honor idle flags in the built-in idle selection policy
sched_ext: Skip per-CPU tasks in scx_bpf_reenqueue_local()
sched_ext: Add trace point to track sched_ext core events
sched_ext: Change the event type from u64 to s64
sched_ext: Documentation: add task lifecycle summary
tools/sched_ext: Provide a compatible helper for scx_bpf_events()
selftests/sched_ext: Add NUMA-aware scheduler test
tools/sched_ext: Provide consistent access to scx flags
sched_ext: idle: Fix scx_bpf_pick_any_cpu_node() behavior
sched_ext: idle: Introduce scx_bpf_nr_node_ids()
sched_ext: idle: Introduce node-aware idle cpu kfunc helpers
sched_ext: idle: Per-node idle cpumasks
sched_ext: idle: Introduce SCX_OPS_BUILTIN_IDLE_PER_NODE
sched_ext: idle: Make idle static keys private
sched/topology: Introduce for_each_node_numadist() iterator
mm/numa: Introduce nearest_node_nodemask()
nodemask: numa: reorganize inclusion path
nodemask: add nodes_copy()
tools/sched_ext: Sync with scx repo
...
- avoid the lock trip seccomp_filter_release in common case (Mateusz Guzik)
- remove unused 'sd' argument through-out (Oleg Nesterov)
- selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ9hJKgAKCRA2KwveOeQk
u3UDAQCUPSJ+iNGEsh9ErHJZWmg+LQJ999fOVrWWz+onjXFoQgD/cEHyLtSnz1Oa
RbdGEqkBkRTXgOdkcIW5pJ4lBtfIpQQ=
=z/8H
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp updates from Kees Cook:
- avoid the lock trip seccomp_filter_release in common case (Mateusz
Guzik)
- remove unused 'sd' argument through-out (Oleg Nesterov)
- selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64
* tag 'seccomp-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
seccomp: avoid the lock trip seccomp_filter_release in common case
seccomp: remove the 'sd' argument from __seccomp_filter()
seccomp: remove the 'sd' argument from __secure_computing()
seccomp: fix the __secure_computing() stub for !HAVE_ARCH_SECCOMP_FILTER
seccomp/mips: change syscall_trace_enter() to use secure_computing()
selftests/seccomp: Add hard-coded __NR_uretprobe for x86_64
- move lib/ selftests into lib/tests/ (Kees Cook, Gabriela Bittencourt,
Luis Felipe Hernandez, Lukas Bulwahn, Tamir Duberstein)
- lib/math: Add int_log test suite (Bruno Sobreira França)
- lib/math: Add Kunit test suite for gcd() (Yu-Chun Lin)
- lib/tests/kfifo_kunit.c: add tests for the kfifo structure (Diego Vieira)
- unicode: refactor selftests into KUnit (Gabriela Bittencourt)
- lib/prime_numbers: convert self-test to KUnit (Tamir Duberstein)
- printf: convert self-test to KUnit (Tamir Duberstein)
- scanf: convert self-test to KUnit (Tamir Duberstein)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ9hCvgAKCRA2KwveOeQk
u1nzAP9F/vQZUPkU9ADuqdcbyyEXlTzNk8R5rC2e1w+uKzJx+QD9EAbeCv9ZLdC0
KQF0pWVYCJtiSMEhkiMS/bMmpRCgwQ8=
=VYZG
-----END PGP SIGNATURE-----
Merge tag 'move-lib-kunit-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull lib kunit selftest move from Kees Cook:
"This is a one-off tree to coordinate the move of selftests out of lib/
and into lib/tests/. A separate tree was used for this to keep the
paths sane with all the work in the same place.
- move lib/ selftests into lib/tests/ (Kees Cook, Gabriela
Bittencourt, Luis Felipe Hernandez, Lukas Bulwahn, Tamir
Duberstein)
- lib/math: Add int_log test suite (Bruno Sobreira França)
- lib/math: Add Kunit test suite for gcd() (Yu-Chun Lin)
- lib/tests/kfifo_kunit.c: add tests for the kfifo structure (Diego
Vieira)
- unicode: refactor selftests into KUnit (Gabriela Bittencourt)
- lib/prime_numbers: convert self-test to KUnit (Tamir Duberstein)
- printf: convert self-test to KUnit (Tamir Duberstein)
- scanf: convert self-test to KUnit (Tamir Duberstein)"
* tag 'move-lib-kunit-v6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (21 commits)
scanf: break kunit into test cases
scanf: convert self-test to KUnit
scanf: remove redundant debug logs
scanf: implicate test line in failure messages
printf: implicate test line in failure messages
printf: break kunit into test cases
printf: convert self-test to KUnit
kunit/fortify: Replace "volatile" with OPTIMIZER_HIDE_VAR()
kunit/fortify: Expand testing of __compiletime_strlen()
kunit/stackinit: Use fill byte different from Clang i386 pattern
kunit/overflow: Fix DEFINE_FLEX tests for counted_by
selftests: remove reference to prime_numbers.sh
MAINTAINERS: adjust entries in FORTIFY_SOURCE and KERNEL HARDENING
lib/prime_numbers: convert self-test to KUnit
lib/math: Add Kunit test suite for gcd()
unicode: kunit: change tests filename and path
unicode: kunit: refactor selftest to kunit tests
lib/tests/kfifo_kunit.c: add tests for the kfifo structure
lib: Move KUnit tests into tests/ subdirectory
lib/math: Add int_log test suite
...
The test_rss_context_dump() test assumes the indirection table is always
supported, which is not true for all drivers, e.g., virtio_net when
VIRTIO_NET_F_RSS is disabled.
Skip the check if 'indir' is not present.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250318112426.386651-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add more imix_weights test cases (for incomplete input).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250317090401.1240704-2-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90r2wAKCRCRxhvAZXjc
ouC6AQCk3MoqskN0WeNcaZT23dB7dHbEhf/7YXOFC9MFRMKXqQD9Fbn95+GuIe3U
nBVPbVyQfDtfXE08ml6gbDJrCsbkkQI=
=Xm1C
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.mount.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount namespace updates from Christian Brauner:
"This expands the ability of anonymous mount namespaces:
- Creating detached mounts from detached mounts
Currently, detached mounts can only be created from attached
mounts. This limitaton prevents various use-cases. For example, the
ability to mount a subdirectory without ever having to make the
whole filesystem visible first.
The current permission modelis:
(1) Check that the caller is privileged over the owning user
namespace of it's current mount namespace.
(2) Check that the caller is located in the mount namespace of the
mount it wants to create a detached copy of.
While it is not strictly necessary to do it this way it is
consistently applied in the new mount api. This model will also be
used when allowing the creation of detached mount from another
detached mount.
The (1) requirement can simply be met by performing the same check
as for the non-detached case, i.e., verify that the caller is
privileged over its current mount namespace.
To meet the (2) requirement it must be possible to infer the origin
mount namespace that the anonymous mount namespace of the detached
mount was created from.
The origin mount namespace of an anonymous mount is the mount
namespace that the mounts that were copied into the anonymous mount
namespace originate from.
In order to check the origin mount namespace of an anonymous mount
namespace the sequence number of the original mount namespace is
recorded in the anonymous mount namespace.
With this in place it is possible to perform an equivalent check
(2') to (2). The origin mount namespace of the anonymous mount
namespace must be the same as the caller's mount namespace. To
establish this the sequence number of the caller's mount namespace
and the origin sequence number of the anonymous mount namespace are
compared.
The caller is always located in a non-anonymous mount namespace
since anonymous mount namespaces cannot be setns()ed into. The
caller's mount namespace will thus always have a valid sequence
number.
The owning namespace of any mount namespace, anonymous or
non-anonymous, can never change. A mount attached to a
non-anonymous mount namespace can never change mount namespace.
If the sequence number of the non-anonymous mount namespace and the
origin sequence number of the anonymous mount namespace match, the
owning namespaces must match as well.
Hence, the capability check on the owning namespace of the caller's
mount namespace ensures that the caller has the ability to copy the
mount tree.
- Allow mount detached mounts on detached mounts
Currently, detached mounts can only be mounted onto attached
mounts. This limitation makes it impossible to assemble a new
private rootfs and move it into place. Instead, a detached tree
must be created, attached, then mounted open and then either moved
or detached again. Lift this restriction.
In order to allow mounting detached mounts onto other detached
mounts the same permission model used for creating detached mounts
from detached mounts can be used (cf. above).
Allowing to mount detached mounts onto detached mounts leaves three
cases to consider:
(1) The source mount is an attached mount and the target mount is
a detached mount. This would be equivalent to moving a mount
between different mount namespaces. A caller could move an
attached mount to a detached mount. The detached mount can now
be freely attached to any mount namespace. This changes the
current delegatioh model significantly for no good reason. So
this will fail.
(2) Anonymous mount namespaces are always attached fully, i.e., it
is not possible to only attach a subtree of an anoymous mount
namespace. This simplifies the implementation and reasoning.
Consequently, if the anonymous mount namespace of the source
detached mount and the target detached mount are the identical
the mount request will fail.
(3) The source mount's anonymous mount namespace is different from
the target mount's anonymous mount namespace.
In this case the source anonymous mount namespace of the
source mount tree must be freed after its mounts have been
moved to the target anonymous mount namespace. The source
anonymous mount namespace must be empty afterwards.
By allowing to mount detached mounts onto detached mounts a caller
may do the following:
fd_tree1 = open_tree(-EBADF, "/mnt", OPEN_TREE_CLONE)
fd_tree2 = open_tree(-EBADF, "/tmp", OPEN_TREE_CLONE)
fd_tree1 and fd_tree2 refer to two different detached mount trees
that belong to two different anonymous mount namespace.
It is important to note that fd_tree1 and fd_tree2 both refer to
the root of their respective anonymous mount namespaces.
By allowing to mount detached mounts onto detached mounts the
caller may now do:
move_mount(fd_tree1, "", fd_tree2, "",
MOVE_MOUNT_F_EMPTY_PATH | MOVE_MOUNT_T_EMPTY_PATH)
This will cause the detached mount referred to by fd_tree1 to be
mounted on top of the detached mount referred to by fd_tree2.
Thus, the detached mount fd_tree1 is moved from its separate
anonymous mount namespace into fd_tree2's anonymous mount
namespace.
It also means that while fd_tree2 continues to refer to the root of
its respective anonymous mount namespace fd_tree1 doesn't anymore.
This has the consequence that only fd_tree2 can be moved to another
anonymous or non-anonymous mount namespace. Moving fd_tree1 will
now fail as fd_tree1 doesn't refer to the root of an anoymous mount
namespace anymore.
Now fd_tree1 and fd_tree2 refer to separate detached mount trees
referring to the same anonymous mount namespace.
This is conceptually fine. The new mount api does allow for this to
happen already via:
mount -t tmpfs tmpfs /mnt
mkdir -p /mnt/A
mount -t tmpfs tmpfs /mnt/A
fd_tree3 = open_tree(-EBADF, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE)
fd_tree4 = open_tree(-EBADF, "/mnt/A", 0)
Both fd_tree3 and fd_tree4 refer to two different detached mount
trees but both detached mount trees refer to the same anonymous
mount namespace. An as with fd_tree1 and fd_tree2, only fd_tree3
may be moved another mount namespace as fd_tree3 refers to the root
of the anonymous mount namespace just while fd_tree4 doesn't.
However, there's an important difference between the
fd_tree3/fd_tree4 and the fd_tree1/fd_tree2 example.
Closing fd_tree4 and releasing the respective struct file will have
no further effect on fd_tree3's detached mount tree.
However, closing fd_tree3 will cause the mount tree and the
respective anonymous mount namespace to be destroyed causing the
detached mount tree of fd_tree4 to be invalid for further mounting.
By allowing to mount detached mounts on detached mounts as in the
fd_tree1/fd_tree2 example both struct files will affect each other.
Both fd_tree1 and fd_tree2 refer to struct files that have
FMODE_NEED_UNMOUNT set.
To handle this we use the fact that @fd_tree1 will have a parent
mount once it has been attached to @fd_tree2.
When dissolve_on_fput() is called the mount that has been passed in
will refer to the root of the anonymous mount namespace. If it
doesn't it would mean that mounts are leaked. So before allowing to
mount detached mounts onto detached mounts this would be a bug.
Now that detached mounts can be mounted onto detached mounts it
just means that the mount has been attached to another anonymous
mount namespace and thus dissolve_on_fput() must not unmount the
mount tree or free the anonymous mount namespace as the file
referring to the root of the namespace hasn't been closed yet.
If it had been closed yet it would be obvious because the mount
namespace would be NULL, i.e., the @fd_tree1 would have already
been unmounted. If @fd_tree1 hasn't been unmounted yet and has a
parent mount it is safe to skip any cleanup as closing @fd_tree2
will take care of all cleanup operations.
- Allow mount propagation for detached mount trees
In commit ee2e3f5062 ("mount: fix mounting of detached mounts
onto targets that reside on shared mounts") I fixed a bug where
propagating the source mount tree of an anonymous mount namespace
into a target mount tree of a non-anonymous mount namespace could
be used to trigger an integer overflow in the non-anonymous mount
namespace causing any new mounts to fail.
The cause of this was that the propagation algorithm was unable to
recognize mounts from the source mount tree that were already
propagated into the target mount tree and then reappeared as
propagation targets when walking the destination propagation mount
tree.
When fixing this I disabled mount propagation into anonymous mount
namespaces. Make it possible for anonymous mount namespace to
receive mount propagation events correctly. This is now also a
correctness issue now that we allow mounting detached mount trees
onto detached mount trees.
Mark the source anonymous mount namespace with MNTNS_PROPAGATING
indicating that all mounts belonging to this mount namespace are
currently in the process of being propagated and make the
propagation algorithm discard those if they appear as propagation
targets"
* tag 'vfs-6.15-rc1.mount.namespace' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
selftests: test subdirectory mounting
selftests: add test for detached mount tree propagation
fs: namespace: fix uninitialized variable use
mount: handle mount propagation for detached mount trees
fs: allow creating detached mounts from fsmount() file descriptors
selftests: seventh test for mounting detached mounts onto detached mounts
selftests: sixth test for mounting detached mounts onto detached mounts
selftests: fifth test for mounting detached mounts onto detached mounts
selftests: fourth test for mounting detached mounts onto detached mounts
selftests: third test for mounting detached mounts onto detached mounts
selftests: second test for mounting detached mounts onto detached mounts
selftests: first test for mounting detached mounts onto detached mounts
fs: mount detached mounts onto detached mounts
fs: support getname_maybe_null() in move_mount()
selftests: create detached mounts from detached mounts
fs: create detached mounts from detached mounts
fs: add may_copy_tree()
fs: add fastpath for dissolve_on_fput()
fs: add assert for move_mount()
fs: add mnt_ns_empty() helper
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90rXwAKCRCRxhvAZXjc
ogrYAP4kWLzxD2IbBGSs5kBkKdc9qNGMtjrOn5InHm263vTpPwD/VYcOmyc3gScO
e8hTBES3mYlzBpselh99HnGx5geMtAE=
=+I5+
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs nsfs updates from Christian Brauner:
"This contains non-urgent fixes for nsfs to validate ioctls before
performing any relevant operations.
We alredy did this for a few other filesystems last cycle"
* tag 'vfs-6.15-rc1.nsfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/nsfs: add ioctl validation tests
nsfs: validate ioctls
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90rUAAKCRCRxhvAZXjc
opI3AP9ws4S/JXOjxNKoTYmNM2nZ8+r1v8tUxbLIiqdvzx9PygD/V1ZjXtn6lwZr
OK8d5Y8UnlPZTlBF8D61op3AjnXYzws=
=KV4p
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.overlayfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs overlayfs updates from Christian Brauner:
"Currently overlayfs uses the mounter's credentials for its
override_creds() calls. That provides a consistent permission model.
This patches allows a caller to instruct overlayfs to use its
credentials instead. The caller must be located in the same user
namespace hierarchy as the user namespace the overlayfs instance will
be mounted in. This provides a consistent and simple security model.
With this it is possible to e.g., mount an overlayfs instance where
the mounter must have CAP_SYS_ADMIN but the credentials used for
override_creds() have dropped CAP_SYS_ADMIN. It also allows the usage
of custom fs{g,u}id different from the callers and other tweaks"
* tag 'vfs-6.15-rc1.overlayfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/ovl: add third selftest for "override_creds"
selftests/ovl: add second selftest for "override_creds"
selftests/filesystems: add utils.{c,h}
selftests/ovl: add first selftest for "override_creds"
ovl: allow to specify override credentials
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90pqgAKCRCRxhvAZXjc
oqVsAP9Aq/fMCI14HeXehPCezKQZPu1HTrPPo2clLHXoSnafawEAsA3YfWTT4Heb
iexzqvAEUOMYOVN66QEc+6AAwtMLrwc=
=0eYo
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs pidfs updates from Christian Brauner:
- Allow retrieving exit information after a process has been reaped
through pidfds via the new PIDFD_INTO_EXIT extension for the
PIDFD_GET_INFO ioctl. Various tools need access to information about
a process/task even after it has already been reaped.
Pidfd polling allows waiting on either task exit or for a task to
have been reaped. The contract for PIDFD_INFO_EXIT is simply that
EPOLLHUP must be observed before exit information can be retrieved,
i.e., exit information is only provided once the task has been reaped
and then can be retrieved as long as the pidfd is open.
- Add PIDFD_SELF_{THREAD,THREAD_GROUP} sentinels allowing userspace to
forgo allocating a file descriptor for their own process. This is
useful in scenarios where users want to act on their own process
through pidfds and is akin to AT_FDCWD.
- Improve premature thread-group leader and subthread exec behavior
when polling on pidfds:
(1) During a multi-threaded exec by a subthread, i.e.,
non-thread-group leader thread, all other threads in the
thread-group including the thread-group leader are killed and the
struct pid of the thread-group leader will be taken over by the
subthread that called exec. IOW, two tasks change their TIDs.
(2) A premature thread-group leader exit means that the thread-group
leader exited before all of the other subthreads in the
thread-group have exited.
Both cases lead to inconsistencies for pidfd polling with
PIDFD_THREAD. Any caller that holds a PIDFD_THREAD pidfd to the
current thread-group leader may or may not see an exit notification
on the file descriptor depending on when poll is performed. If the
poll is performed before the exec of the subthread has concluded an
exit notification is generated for the old thread-group leader. If
the poll is performed after the exec of the subthread has concluded
no exit notification is generated for the old thread-group leader.
The correct behavior is to simply not generate an exit notification
on the struct pid of a subhthread exec because the struct pid is
taken over by the subthread and thus remains alive.
But this is difficult to handle because a thread-group may exit
premature as mentioned in (2). In that case an exit notification is
reliably generated but the subthreads may continue to run for an
indeterminate amount of time and thus also may exec at some point.
After this pull no exit notifications will be generated for a
PIDFD_THREAD pidfd for a thread-group leader until all subthreads
have been reaped. If a subthread should exec before no exit
notification will be generated until that task exits or it creates
subthreads and repeates the cycle.
This means an exit notification indicates the ability for the father
to reap the child.
* tag 'vfs-6.15-rc1.pidfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (25 commits)
selftests/pidfd: third test for multi-threaded exec polling
selftests/pidfd: second test for multi-threaded exec polling
selftests/pidfd: first test for multi-threaded exec polling
pidfs: improve multi-threaded exec and premature thread-group leader exit polling
pidfs: ensure that PIDFS_INFO_EXIT is available
selftests/pidfd: add seventh PIDFD_INFO_EXIT selftest
selftests/pidfd: add sixth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fifth PIDFD_INFO_EXIT selftest
selftests/pidfd: add fourth PIDFD_INFO_EXIT selftest
selftests/pidfd: add third PIDFD_INFO_EXIT selftest
selftests/pidfd: add second PIDFD_INFO_EXIT selftest
selftests/pidfd: add first PIDFD_INFO_EXIT selftest
selftests/pidfd: expand common pidfd header
pidfs/selftests: ensure correct headers for ioctl handling
selftests/pidfd: fix header inclusion
pidfs: allow to retrieve exit information
pidfs: record exit code and cgroupid at exit
pidfs: use private inode slab cache
pidfs: move setting flags into pidfs_alloc_file()
pidfd: rely on automatic cleanup in __pidfd_prepare()
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ90qAwAKCRCRxhvAZXjc
on7lAP0akpIsJMWREg9tLwTNTySI1b82uKec0EAgM6T7n/PYhAD/T4zoY8UYU0Pr
qCxwTXHUVT6bkNhjREBkfqq9OkPP8w8=
=GxeN
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Mount notifications
The day has come where we finally provide a new api to listen for
mount topology changes outside of /proc/<pid>/mountinfo. A mount
namespace file descriptor can be supplied and registered with
fanotify to listen for mount topology changes.
Currently notifications for mount, umount and moving mounts are
generated. The generated notification record contains the unique
mount id of the mount.
The listmount() and statmount() api can be used to query detailed
information about the mount using the received unique mount id.
This allows userspace to figure out exactly how the mount topology
changed without having to generating diffs of /proc/<pid>/mountinfo
in userspace.
- Support O_PATH file descriptors with FSCONFIG_SET_FD in the new mount
api
- Support detached mounts in overlayfs
Since last cycle we support specifying overlayfs layers via file
descriptors. However, we don't allow detached mounts which means
userspace cannot user file descriptors received via
open_tree(OPEN_TREE_CLONE) and fsmount() directly. They have to
attach them to a mount namespace via move_mount() first.
This is cumbersome and means they have to undo mounts via umount().
Allow them to directly use detached mounts.
- Allow to retrieve idmappings with statmount
Currently it isn't possible to figure out what idmapping has been
attached to an idmapped mount. Add an extension to statmount() which
allows to read the idmapping from the mount.
- Allow creating idmapped mounts from mounts that are already idmapped
So far it isn't possible to allow the creation of idmapped mounts
from already idmapped mounts as this has significant lifetime
implications. Make the creation of idmapped mounts atomic by allow to
pass struct mount_attr together with the open_tree_attr() system call
allowing to solve these issues without complicating VFS lookup in any
way.
The system call has in general the benefit that creating a detached
mount and applying mount attributes to it becomes an atomic operation
for userspace.
- Add a way to query statmount() for supported options
Allow userspace to query which mount information can be retrieved
through statmount().
- Allow superblock owners to force unmount
* tag 'vfs-6.15-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (21 commits)
umount: Allow superblock owners to force umount
selftests: add tests for mount notification
selinux: add FILE__WATCH_MOUNTNS
samples/vfs: fix printf format string for size_t
fs: allow changing idmappings
fs: add kflags member to struct mount_kattr
fs: add open_tree_attr()
fs: add copy_mount_setattr() helper
fs: add vfs_open_tree() helper
statmount: add a new supported_mask field
samples/vfs: add STATMOUNT_MNT_{G,U}IDMAP
selftests: add tests for using detached mount with overlayfs
samples/vfs: check whether flag was raised
statmount: allow to retrieve idmappings
uidgid: add map_id_range_up()
fs: allow detached mounts in clone_private_mount()
selftests/overlayfs: test specifying layers as O_PATH file descriptors
fs: support O_PATH fds with FSCONFIG_SET_FD
vfs: add notifications for mount attach and detach
fanotify: notify on mount attach and detach
...
Add ublk stripe target which can take 1~4 underlying backing files
or block device, with stripe size 4k ~ 512K.
Add two basic tests(write verify & mkfs/mount/umount) over ublk/stripe.
This target is helpful to cover multiple IOs aiming at same
fixed/registered IO kernel buffer.
It is also capable of verifying vectored registered (kernel)buffers
in future for zero copy, so far it isn't supported yet.
Todo: support vectored registered kernel buffer for ublk/zc.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable zero copy for null target so that we can evaluate performance
from zero copy or not.
Also this should be the simplest ublk zero copy implementation, which
can be served as zc example.
Add test for covering 'add -t null -z'.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- pass 'truct dev_ctx *ctx' to target init function
- add 'private_data' to 'struct ublk_dev' for storing target specific data
- add 'private_data' to 'struct ublk_io' for storing per-IO data
- add 'tgt_ios' to 'struct ublk_io' for counting how many io_uring ios
for handling the current io command
- add helper ublk_get_io() for supporting stripe target
- add two helpers for simplifying target io handling
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-6-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move two functions for initializing & de-initializing backing file
into common.c.
Also move one common helper into kublk.h.
Prepare for supporting ublk-stripe.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Increase max buffer size to 1MB, and 64KB is too small to evaluate
performance with builtin ublk server implementation.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unify the sqe allocator helper, and we will use it for supporting
more cases, such as ublk stripe, in which variable sqe allocation
is required.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
block layer, ublk and io_uring might re-order IO in the past
- plug
- queue ublk io command via task work
Add one test for verifying if sequential WRITE IO is dispatched in order.
- null target is taken, so we can just observe io order from
`tracepoint:block:block_rq_complete` which represents the dispatch order
- WRITE IO is taken because READ may come from system-wide utility
Cc: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250322093218.431419-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
syzbot reported out-of-bounds read in check_atomic_load/store() when the
register number is invalid in this context:
https://syzkaller.appspot.com/bug?extid=a5964227adc0f904549c
To avoid the issue from now on, let's add tests where the register number
is invalid for load-acquire/store-release.
After discussion with Eduard, I decided to use R15 as invalid register
because the actual slab-out-of-bounds read issue occurs when the register
number is R12 or larger.
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250322045340.18010-6-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
syzbot reported the following splat [0].
In check_atomic_load/store(), register validity is not checked before
atomic_ptr_type_ok(). This causes the out-of-bounds read in is_ctx_reg()
called from atomic_ptr_type_ok() when the register number is MAX_BPF_REG
or greater.
Call check_load_mem()/check_store_reg() before atomic_ptr_type_ok()
to avoid the OOB read.
However, some tests introduced by commit ff3afe5da9 ("selftests/bpf: Add
selftests for load-acquire and store-release instructions") assume
calling atomic_ptr_type_ok() before checking register validity.
Therefore the swapping of order unintentionally changes verifier messages
of these tests.
For example in the test load_acquire_from_pkt_pointer(), expected message
is 'BPF_ATOMIC loads from R2 pkt is not allowed' although actual messages
are different.
validate_msgs:FAIL:754 expect_msg
VERIFIER LOG:
=============
Global function load_acquire_from_pkt_pointer() doesn't return scalar. Only those are supported.
0: R1=ctx() R10=fp0
; asm volatile ( @ verifier_load_acquire.c:140
0: (61) r2 = *(u32 *)(r1 +0) ; R1=ctx() R2_w=pkt(r=0)
1: (d3) r0 = load_acquire((u8 *)(r2 +0))
invalid access to packet, off=0 size=1, R2(id=0,off=0,r=0)
R2 offset is outside of the packet
processed 2 insns (limit 1000000) max_states_per_insn 0 total_states 0 peak_states 0 mark_read 0
=============
EXPECTED SUBSTR: 'BPF_ATOMIC loads from R2 pkt is not allowed'
#505/19 verifier_load_acquire/load-acquire from pkt pointer:FAIL
This is because instructions in the test don't pass check_load_mem() and
therefore don't enter the atomic_ptr_type_ok() path.
In this case, we have to modify instructions so that they pass the
check_load_mem() and trigger atomic_ptr_type_ok().
Similarly for store-release tests, we need to modify instructions so that
they pass check_store_reg().
Like load_acquire_from_pkt_pointer(), modify instructions in:
load_acquire_from_sock_pointer()
store_release_to_ctx_pointer()
store_release_to_pkt_pointer()
Also in store_release_to_sock_pointer(), check_store_reg() returns error
early and atomic_ptr_type_ok() is not triggered, since write to sock
pointer is not possible in general.
We might be able to remove the test, but for now let's leave it and just
change the expected message.
[0]
BUG: KASAN: slab-out-of-bounds in is_ctx_reg kernel/bpf/verifier.c:6185 [inline]
BUG: KASAN: slab-out-of-bounds in atomic_ptr_type_ok+0x3d7/0x550 kernel/bpf/verifier.c:6223
Read of size 4 at addr ffff888141b0d690 by task syz-executor143/5842
CPU: 1 UID: 0 PID: 5842 Comm: syz-executor143 Not tainted 6.14.0-rc3-syzkaller-gf28214603dc6 #0
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:408 [inline]
print_report+0x16e/0x5b0 mm/kasan/report.c:521
kasan_report+0x143/0x180 mm/kasan/report.c:634
is_ctx_reg kernel/bpf/verifier.c:6185 [inline]
atomic_ptr_type_ok+0x3d7/0x550 kernel/bpf/verifier.c:6223
check_atomic_store kernel/bpf/verifier.c:7804 [inline]
check_atomic kernel/bpf/verifier.c:7841 [inline]
do_check+0x89dd/0xedd0 kernel/bpf/verifier.c:19334
do_check_common+0x1678/0x2080 kernel/bpf/verifier.c:22600
do_check_main kernel/bpf/verifier.c:22691 [inline]
bpf_check+0x165c8/0x1cca0 kernel/bpf/verifier.c:23821
Reported-by: syzbot+a5964227adc0f904549c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a5964227adc0f904549c
Tested-by: syzbot+a5964227adc0f904549c@syzkaller.appspotmail.com
Fixes: e24bbad29a8d ("bpf: Introduce load-acquire and store-release instructions")
Fixes: ff3afe5da9 ("selftests/bpf: Add selftests for load-acquire and store-release instructions")
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250322045340.18010-5-enjuk@amazon.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
create_pagecache_thp_and_fd() was previously writing a file sized at twice
the PMD size by making a per-byte write syscall. This was quite slow when
the PMD size is 4M, but completely intolerable for 32M (PMD size for
arm64's 16K page size), and 512M (PMD size for arm64's 64K page size).
The byte pattern has a 256 byte period, so let's create a 1K buffer and
fill it with exactly 4 periods. Then we can write the buffer as many
times as is required to fill the file. This makes things much more
tolerable.
The test now passes for 16K page size. It still fails for 64K page size
because MAX_PAGECACHE_ORDER is too small for 512M folio size (I think).
Link: https://lkml.kernel.org/r/20250318174343.243631-3-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
uffd-unit-tests uses a memory area with a fixed 32M size. Then it
calculates the number of pages by dividing by page_size, which itself is
either the base page size or the PMD huge page size depending on the test
config. For the latter, we end up with nr_pages=1 for arm64 16K base
pages, and nr_pages=0 for 64K base pages. This doesn't end well.
So let's make the 32M size a floor and also ensure that we have at least 2
pages given the PMD size. With this change, the tests pass on arm64 64K
base page size configuration.
Link: https://lkml.kernel.org/r/20250318174343.243631-2-ryan.roberts@arm.com
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: Rafael Aquini <raquini@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As discussed here:
https://lore.kernel.org/lkml/Z9RRkL1hom48z3Tt@google.com/
This code could benefit from some more commentary.
To avoid needing to comment the same thing in multiple places (I guess
more of these SKIPs will need to be added over time, for now I am only
like 20% of the way through Project Run run_vmtests.sh Successfully), add
a dummy "skip tests for this specific reason" function that basically just
serves as a hook to hang comments on.
Link: https://lkml.kernel.org/r/20250317-9pfs-comments-v1-1-9ac96043e146@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Firstly ublk char device node may not be created by udev yet, so wait
a while until it can be opened or timeout.
Secondly delete created ublk device in case of start failure, otherwise
the device becomes zombie.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250321135324.259677-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Lei Chen reported a bug with CLOCK_MONOTONIC_COARSE having inconsistencies
when NTP is adjusting the clock frequency.
This has gone seemingly undetected for ~15 years, illustrating a clear gap
in our testing.
The skew_consistency test is intended to catch this sort of problem, but
was focused on only evaluating CLOCK_MONOTONIC, and thus missed the problem
on CLOCK_MONOTONIC_COARSE.
So adjust the test to run with all clockids for 60 seconds each instead of
10 minutes with just CLOCK_MONOTONIC.
Reported-by: Lei Chen <lei.chen@smartx.com>
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250320200306.1712599-2-jstultz@google.com
Closes: https://lore.kernel.org/lkml/20250310030004.3705801-1-lei.chen@smartx.com/
Expands the self-tests to include the 'release' feature in
sysdata.
Verifies that enabling the 'release' feature appends the
correct data and ensures that disabling it functions as expected.
When enabled, the message should have an item similar to in the
userdata: `release=$(uname -r)`
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314-netcons_release-v1-5-07979c4b86af@debian.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some fixes may require user space to check if they are applied on the
running kernel before using a specific feature. For instance, this
applies when a restriction was previously too restrictive and is now
getting relaxed (e.g. for compatibility reasons). However, non-visible
changes for legitimate use (e.g. security fixes) do not require an
erratum.
Because fixes are backported down to a specific Landlock ABI, we need a
way to avoid cherry-pick conflicts. The solution is to only update a
file related to the lower ABI impacted by this issue. All the ABI files
are then used to create a bitmask of fixes.
The new errata interface is similar to the one used to get the supported
Landlock ABI version, but it returns a bitmask instead because the order
of fixes may not match the order of versions, and not all fixes may
apply to all versions.
The actual errata will come with dedicated commits. The description is
not actually used in the code but serves as documentation.
Create the landlock_abi_version symbol and use its value to check errata
consistency.
Update test_base's create_ruleset_checks_ordering tests and add errata
tests.
This commit is backportable down to the first version of Landlock.
Fixes: 3532b0b435 ("landlock: Enable user space to infer supported features")
Cc: Günther Noack <gnoack@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250318161443.279194-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
All implementations of chacha_init_arch() just call
chacha_init_generic(), so it is pointless. Just delete it, and replace
chacha_init() with what was previously chacha_init_generic().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For loop target, write cache isn't enabled, and each write isn't be
marked as DSYNC too.
Fix it by enabling write cache, meantime fix FLUSH implementation
by not taking LBA range into account, and there isn't such info
for FLUSH command.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250321004758.152572-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ublk_drv may be built-in, so don't show modprobe failure, and we
do check `/dev/ublk-control` for skipping test if ublk_drv isn't
enabled.
Reported-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250320013743.4167489-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add one dependency helper which can include new uapi definition which
isn't synced from kernel.
This way also helps a lot for downstream test deployment.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250320013743.4167489-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZ9NWrwAKCRAraS+Z+3y5
E2VIAP4iIdMobFDEm04JuXyrOK6HasnkOFkuEgLNNhGRbCCTTwD/X/2A8baSXnjg
eqYN2DJfrs7OZ1ZUku/ic1VGtJg7Sgk=
=jTyW
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-03-13
The following pull-request contains BPF updates for your *net-next* tree.
We've added 4 non-merge commits during the last 3 day(s) which contain
a total of 2 files changed, 35 insertions(+), 12 deletions(-).
The main changes are:
1) bpf_getsockopt support for TCP_BPF_RTO_MIN and TCP_BPF_DELACK_MAX,
from Jason Xing
bpf-next-for-netdev
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Add bpf_getsockopt() for TCP_BPF_DELACK_MAX and TCP_BPF_RTO_MIN
tcp: bpf: Support bpf_getsockopt for TCP_BPF_DELACK_MAX
tcp: bpf: Support bpf_getsockopt for TCP_BPF_RTO_MIN
tcp: bpf: Introduce bpf_sol_tcp_getsockopt to support TCP_BPF flags
====================
Link: https://patch.msgid.link/20250313221620.2512684-1-martin.lau@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc8).
Conflict:
tools/testing/selftests/net/Makefile
03544faad7 ("selftest: net: add proc_net_pktgen")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
tools/testing/selftests/net/config:
85cb3711ac ("selftests: net: Add test cases for link and peer netns")
3ed61b8938 ("selftests: net: test for lwtunnel dst ref loops")
Adjacent commits:
tools/testing/selftests/net/Makefile
c935af429e ("selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY")
355d940f4d ("Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are scenarios where env.{sub,}test_state->stdout_saved, can be
NULL, e.g. sometimes when the watchdog timeout kicks in, or if the
open_memstream syscall is not available.
Avoid crashing test_progs by adding an explicit NULL check prior the
fclose() call.
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250318081648.122523-1-bjorn@kernel.org
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZ9s9gBccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFp6LAQCOQ1Fidp8RT1NdhLLAhW5D4gLe
MNT619R4qfqu64ZpeQEAidHMAYaGRk5KDNBq6Jn+awcJnwCcMnh2ok0vTOjz3gY=
=RC6A
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 updates for 6.15
- Nested virtualization support for VGICv3, giving the nested
hypervisor control of the VGIC hardware when running an L2 VM
- Removal of 'late' nested virtualization feature register masking,
making the supported feature set directly visible to userspace
- Support for emulating FEAT_PMUv3 on Apple silicon, taking advantage
of an IMPLEMENTATION DEFINED trap that covers all PMUv3 registers
- Paravirtual interface for discovering the set of CPU implementations
where a VM may run, addressing a longstanding issue of guest CPU
errata awareness in big-little systems and cross-implementation VM
migration
- Userspace control of the registers responsible for identifying a
particular CPU implementation (MIDR_EL1, REVIDR_EL1, AIDR_EL1),
allowing VMs to be migrated cross-implementation
- pKVM updates, including support for tracking stage-2 page table
allocations in the protected hypervisor in the 'SecPageTable' stat
- Fixes to vPMU, ensuring that userspace updates to the vPMU after
KVM_RUN are reflected into the backing perf events
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
-----BEGIN PGP SIGNATURE-----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=HP3N
-----END PGP SIGNATURE-----
Merge tag 'kvm-riscv-6.15-1' of https://github.com/kvm-riscv/linux into HEAD
KVM/riscv changes for 6.15
- Disable the kernel perf counter during configure
- KVM selftests improvements for PMU
- Fix warning at the time of KVM module removal
This contains a last minute revert of a recent GRE patch, mostly
to allow me stating there are no known regressions outstanding.
Current release - regressions:
- revert "gre: Fix IPv6 link-local address generation."
- eth: ti: am65-cpsw: fix NAPI registration sequence
Previous releases - regressions:
- ipv6: fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
- mptcp: fix data stream corruption in the address announcement
- bluetooth: fix connection regression between LE and non-LE adapters
- can:
- flexcan: only change CAN state when link up in system PM
- ucan: fix out of bound read in strscpy() source
Previous releases - always broken:
- lwtunnel: fix reentry loops
- ipv6: fix TCP GSO segmentation with NAT
- xfrm: force software GSO only in tunnel mode
- eth: ti: icssg-prueth: add lock to stats
Misc:
- add Andrea Mayer as a maintainer of SRv6
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=aYLc
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, bluetooth and ipsec.
This contains a last minute revert of a recent GRE patch, mostly to
allow me stating there are no known regressions outstanding.
Current release - regressions:
- revert "gre: Fix IPv6 link-local address generation."
- eth: ti: am65-cpsw: fix NAPI registration sequence
Previous releases - regressions:
- ipv6: fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
- mptcp: fix data stream corruption in the address announcement
- bluetooth: fix connection regression between LE and non-LE adapters
- can:
- flexcan: only change CAN state when link up in system PM
- ucan: fix out of bound read in strscpy() source
Previous releases - always broken:
- lwtunnel: fix reentry loops
- ipv6: fix TCP GSO segmentation with NAT
- xfrm: force software GSO only in tunnel mode
- eth: ti: icssg-prueth: add lock to stats
Misc:
- add Andrea Mayer as a maintainer of SRv6"
* tag 'net-6.14-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (33 commits)
MAINTAINERS: Add Andrea Mayer as a maintainer of SRv6
Revert "gre: Fix IPv6 link-local address generation."
Revert "selftests: Add IPv6 link-local address generation tests for GRE devices."
net/neighbor: add missing policy for NDTPA_QUEUE_LENBYTES
tools headers: Sync uapi/asm-generic/socket.h with the kernel sources
mptcp: Fix data stream corruption in the address announcement
selftests: net: test for lwtunnel dst ref loops
net: ipv6: ioam6: fix lwtunnel_output() loop
net: lwtunnel: fix recursion loops
net: ti: icssg-prueth: Add lock to stats
net: atm: fix use after free in lec_send()
xsk: fix an integer overflow in xp_create_and_assign_umem()
net: stmmac: dwc-qos-eth: use devm_kzalloc() for AXI data
selftests: drv-net: use defer in the ping test
phy: fix xa_alloc_cyclic() error handling
dpll: fix xa_alloc_cyclic() error handling
devlink: fix xa_alloc_cyclic() error handling
ipv6: Set errno after ip_fib_metrics_init() in ip6_route_info_create().
ipv6: Fix memleak of nhc_pcpu_rth_output in fib_check_nh_v6_gw().
net: ipv6: fix TCP GSO segmentation with NAT
...
As recently specified by commit 0ea09cbf83 ("docs: netdev: add a note
on selftest posting") in net-next, the selftest is therefore shipped in
this series. However, this selftest does not really test this series. It
needs this series to avoid crashing the kernel. What it really tests,
thanks to kmemleak, is what was fixed by the following commits:
- commit c71a192976 ("net: ipv6: fix dst refleaks in rpl, seg6 and
ioam6 lwtunnels")
- commit 92191dd107 ("net: ipv6: fix dst ref loops in rpl, seg6 and
ioam6 lwtunnels")
- commit c64a0727f9 ("net: ipv6: fix dst ref loop on input in seg6
lwt")
- commit 13e55fbaec ("net: ipv6: fix dst ref loop on input in rpl
lwt")
- commit 0e7633d7b9 ("net: ipv6: fix dst ref loop in ila lwtunnel")
- commit 5da15a9c11 ("net: ipv6: fix missing dst ref drop in ila
lwtunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-4-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch checks if the newly added net.mptcp.path_manager is mapped
successfully from or to the old net.mptcp.pm_type in userspace_pm.sh.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-12-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
test_xdp_vlan.sh isn't used by the BPF CI.
Migrate test_xdp_vlan.sh in prog_tests/xdp_vlan.c.
It uses the same BPF programs located in progs/test_xdp_vlan.c and the
same network topology.
Remove test_xdp_vlan*.sh and their Makefile entries.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250221-xdp_vlan-v1-2-7d29847169af@bootlin.com/
The __load() helper expects BPF sections to be names 'xdp' or 'tc'
Rename BPF sections so they can be loaded with the __load() helper in
upcoming patch.
Rename the BPF functions with their previous section's name.
Update the 'ip link' commands in the script to use the program name
instead of the section name to load the BPF program.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250221-xdp_vlan-v1-1-7d29847169af@bootlin.com
* kvm-arm64/writable-midr:
: Writable implementation ID registers, courtesy of Sebastian Ott
:
: Introduce a new capability that allows userspace to set the
: ID registers that identify a CPU implementation: MIDR_EL1, REVIDR_EL1,
: and AIDR_EL1. Also plug a hole in KVM's trap configuration where
: SMIDR_EL1 was readable at EL1, despite the fact that KVM does not
: support SME.
KVM: arm64: Fix documentation for KVM_CAP_ARM_WRITABLE_IMP_ID_REGS
KVM: arm64: Copy MIDR_EL1 into hyp VM when it is writable
KVM: arm64: Copy guest CTR_EL0 into hyp VM
KVM: selftests: arm64: Test writes to MIDR,REVIDR,AIDR
KVM: arm64: Allow userspace to change the implementation ID registers
KVM: arm64: Load VPIDR_EL2 with the VM's MIDR_EL1 value
KVM: arm64: Maintain per-VM copy of implementation ID regs
KVM: arm64: Set HCR_EL2.TID1 unconditionally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/pv-cpuid:
: Paravirtualized implementation ID, courtesy of Shameer Kolothum
:
: Big-little has historically been a pain in the ass to virtualize. The
: implementation ID (MIDR, REVIDR, AIDR) of a vCPU can change at the whim
: of vCPU scheduling. This can be particularly annoying when the guest
: needs to know the underlying implementation to mitigate errata.
:
: "Hyperscalers" face a similar scheduling problem, where VMs may freely
: migrate between hosts in a pool of heterogenous hardware. And yes, our
: server-class friends are equally riddled with errata too.
:
: In absence of an architected solution to this wart on the ecosystem,
: introduce support for paravirtualizing the implementation exposed
: to a VM, allowing the VMM to describe the pool of implementations that a
: VM may be exposed to due to scheduling/migration.
:
: Userspace is expected to intercept and handle these hypercalls using the
: SMCCC filter UAPI, should it choose to do so.
smccc: kvm_guest: Fix kernel builds for 32 bit arm
KVM: selftests: Add test for KVM_REG_ARM_VENDOR_HYP_BMAP_2
smccc/kvm_guest: Enable errata based on implementation CPUs
arm64: Make _midr_in_range_list() an exported function
KVM: arm64: Introduce KVM_REG_ARM_VENDOR_HYP_BMAP_2
KVM: arm64: Specify hypercall ABI for retrieving target implementations
arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
* kvm-arm64/nv-idregs:
: Changes to exposure of NV features, courtesy of Marc Zyngier
:
: Apply NV-specific feature restrictions at reset rather than at the point
: of KVM_RUN. This makes the true feature set visible to userspace, a
: necessary step towards save/restore support or NV VMs.
:
: Add an additional vCPU feature flag for selecting the E2H0 flavor of NV,
: such that the VHE-ness of the VM can be applied to the feature set.
KVM: arm64: selftests: Test that TGRAN*_2 fields are writable
KVM: arm64: Allow userspace to write ID_AA64MMFR0_EL1.TGRAN*_2
KVM: arm64: Advertise FEAT_ECV when possible
KVM: arm64: Make ID_AA64MMFR4_EL1.NV_frac writable
KVM: arm64: Allow userspace to limit NV support to nVHE
KVM: arm64: Move NV-specific capping to idreg sanitisation
KVM: arm64: Enforce NV limits on a per-idregs basis
KVM: arm64: Make ID_REG_LIMIT_FIELD_ENUM() more widely available
KVM: arm64: Consolidate idreg callbacks
KVM: arm64: Advertise NV2 in the boot messages
KVM: arm64: Mark HCR.EL2.{NV*,AT} RES0 when ID_AA64MMFR4_EL1.NV_frac is 0
KVM: arm64: Mark HCR.EL2.E2H RES0 when ID_AA64MMFR1_EL1.VH is zero
KVM: arm64: Hide ID_AA64MMFR2_EL1.NV from guest and userspace
arm64: cpufeature: Handle NV_frac as a synonym of NV2
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We leave most of the defconfigs alone (there's over 70 of them),
but let's remove CONFIG_SCHED_DEBUG from the scheduler self-test
Kconfig files.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/Z9szt3MpQmQ56TRd@gmail.com
When the rseq UAPI header is included, 'union rseq' clashes with 'struct
rseq'. It's not the case in the rseq selftests but it does break the KVM
selftests that also include this file.
Rename 'union rseq' to 'union rseq_tls' to fix this.
Fixes: e6644c967d ("rseq/selftests: Ensure the rseq ABI TLS is actually 1024 bytes")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20250319202144.1141542-1-mjeanson@efficios.com
Before tc's recent change to fix rounding errors, several tests which
specified a burst size of "1m" would translate back to being 1048574
bytes (2b less than 1Mb). sprint_size prints this as "1024Kb".
With the tc fix, the burst size is instead correctly reported as
1048576 bytes (precisely 1Mb), which sprint_size prints as "1Mb".
This updates the expected output in the tests' matchPattern values
to accept either the old or the new output.
Signed-off-by: Jonathan Lennox <jonathan.lennox@8x8.com>
Link: https://patch.msgid.link/20250312174804.313107-1-jonathan.lennox@8x8.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Make sure the test cleans up after itself. The XDP off statements
at the end of the test may not be reached.
Fixes: 75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312131040.660386-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce selftests that trigger AA, ABBA deadlocks, and test the edge
case where the held locks table runs out of entries, since we then
fallback to the timeout as the final line of defense. Also exercise
verifier's AA detection where applicable.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250316040541.108729-26-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
- Fix a few minor bugs related to handling of stats FDs.
- Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
- Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
- Misc cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=t77Q
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.15, part 2
- Fix a variety of flaws, bugs, and false failures/passes dirty_log_test, and
improve its coverage by collecting all dirty entries on each iteration.
- Fix a few minor bugs related to handling of stats FDs.
- Add infrastructure to make vCPU and VM stats FDs available to tests by
default (open the FDs during VM/vCPU creation).
- Relax an assertion on the number of HLT exits in the xAPIC IPI test when
running on a CPU that supports AMD's Idle HLT (which elides interception of
HLT if a virtual IRQ is pending and unmasked).
- Misc cleanups and fixes.
- Misc cleanups and prep work.
- Annotate _no_printf() with "printf" so that pr_debug() statements are
checked by the compiler for default builds (and pr_info() when QUIET).
- Attempt to whack the last LLC references/misses mole in the Intel PMU
counters test by adding a data load and doing CLFLUSH{OPT} on the data
instead of the code being executed. The theory is that modern Intel CPUs
have learned new code prefetching tricks that bypass the PMU counters.
- Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
-----BEGIN PGP SIGNATURE-----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=RjiY
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-selftests_6.15-1' of https://github.com/kvm-x86/linux into HEAD
KVM selftests changes for 6.15, part 1
- Misc cleanups and prep work.
- Annotate _no_printf() with "printf" so that pr_debug() statements are
checked by the compiler for default builds (and pr_info() when QUIET).
- Attempt to whack the last LLC references/misses mole in the Intel PMU
counters test by adding a data load and doing CLFLUSH{OPT} on the data
instead of the code being executed. The theory is that modern Intel CPUs
have learned new code prefetching tricks that bypass the PMU counters.
- Fix a flaw in the Intel PMU counters test where it asserts that an event is
counting correctly without actually knowing what the event counts on the
underlying hardware.
- Fix a bug in PIC emulation that caused KVM to emit a spurious KVM_REQ_EVENT.
- Add a helper to consolidate handling of mp_state transitions, and use it to
clear pv_unhalted whenever a vCPU is made RUNNABLE.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
- Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
- Drop "support" for PV Async #PF with proctected guests without SEND_ALWAYS,
as KVM can't get the current CPL.
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=8SGF
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-misc-6.15' of https://github.com/kvm-x86/linux into HEAD
KVM x86 misc changes for 6.15:
- Fix a bug in PIC emulation that caused KVM to emit a spurious KVM_REQ_EVENT.
- Add a helper to consolidate handling of mp_state transitions, and use it to
clear pv_unhalted whenever a vCPU is made RUNNABLE.
- Defer runtime CPUID updates until KVM emulates a CPUID instruction, to
coalesce updates when multiple pieces of vCPU state are changing, e.g. as
part of a nested transition.
- Fix a variety of nested emulation bugs, and add VMX support for synthesizing
nested VM-Exit on interception (instead of injecting #UD into L2).
- Drop "support" for PV Async #PF with proctected guests without SEND_ALWAYS,
as KVM can't get the current CPL.
- Misc cleanups
When attaching a device to a vIOMMU-based nested domain, vdev_id must be
present. Add a piece of code hard-requesting it, preparing for a vEVENTQ
support in the following patch. Then, update the TEST_F.
A HWPT-based nested domain will return a NULL new_viommu, thus no such a
vDEVICE requirement.
Link: https://patch.msgid.link/r/4051ca8a819e51cb30de6b4fe9e4d94d956afe3d.1741719725.git.nicolinc@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add test for Zicbom and its block size into CBO tests, when
Zicbom is present, test that cbo.clean/flush may be issued and works.
As the software can't verify the clean/flush functions, we just judged
that cbo.clean/flush isn't executed illegally.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Signed-off-by: Yunhui Cui <cuiyunhui@bytedance.com>
Link: https://lore.kernel.org/r/20250226063206.71216-4-cuiyunhui@bytedance.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
or aren't considered necessary for -stable kernels.
13 are for MM and the other two are for squashfs and procfs.
All are singletons. Please see the individual changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ9jkDgAKCRDdBJ7gKXxA
jtgjAP0ZIVQ8wEL/txkrNyMT5JrWCK1XfjsfPNJ0afkcl4Oo/QEA8rnJHT/hX8aY
Wr+aY2CoCsFEOsW4oDRUPrUYpkUBqA8=
=AwLJ
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"15 hotfixes. 7 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
13 are for MM and the other two are for squashfs and procfs.
All are singletons. Please see the individual changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-17-20-09' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/page_alloc: fix memory accept before watermarks gets initialized
mm: decline to manipulate the refcount on a slab page
memcg: drain obj stock on cpu hotplug teardown
mm/huge_memory: drop beyond-EOF folios with the right number of refs
selftests/mm: run_vmtests.sh: fix half_ufd_size_MB calculation
mm: fix error handling in __filemap_get_folio() with FGP_NOWAIT
mm: memcontrol: fix swap counter leak from offline cgroup
mm/vma: do not register private-anon mappings with khugepaged during mmap
squashfs: fix invalid pointer dereference in squashfs_cache_delete
mm/migrate: fix shmem xarray update during migration
mm/hugetlb: fix surplus pages in dissolve_free_huge_page()
mm/damon/core: initialize damos->walk_completed in damon_new_scheme()
mm/damon: respect core layer filters' allowance decision on ops layer
filemap: move prefaulting out of hot write path
proc: fix UAF in proc_get_inode()
It splits page cache folios to orders from 0 to 8 at different in-folio
offset.
Link: https://lkml.kernel.org/r/20250307174001.242794-9-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "Buddy allocator like (or non-uniform) folio split", v10.
This patchset adds a new buddy allocator like (or non-uniform) large folio
split from a order-n folio to order-m with m < n. It reduces
1. the total number of after-split folios from 2^(n-m) to n-m+1;
2. the amount of memory needed for multi-index xarray split from 2^(n/6-m/6) to
n/6-m/6, assuming XA_CHUNK_SHIFT=6;
3. keep more large folios after a split from all order-m folios to
order-(n-1) to order-m folios.
For example, to split an order-9 to order-0, folio split generates 10 (or
11 for anonymous memory) folios instead of 512, allocates 1 xa_node
instead of 8, and leaves 1 order-8, 1 order-7, ..., 1 order-1 and 2
order-0 folios (or 4 order-0 for anonymous memory) instead of 512 order-0
folios.
Instead of duplicating existing split_huge_page*() code, __folio_split()
is introduced as the shared backend code for both
split_huge_page_to_list_to_order() and folio_split(). __folio_split() can
support both uniform split and buddy allocator like (or non-uniform)
split. All existing split_huge_page*() users can be gradually converted
to use folio_split() if possible. In this patchset, I converted
truncate_inode_partial_folio() to use folio_split().
xfstests quick group passed for both tmpfs and xfs. I also
semi-replicated Hugh's test[12] and ran it without any issue for almost 24
hours.
This patch (of 8):
A preparation patch for non-uniform folio split, which always split a
folio into half iteratively, and minimal xarray entry split.
Currently, xas_split_alloc() and xas_split() always split all slots from a
multi-index entry. They cost the same number of xa_node as the
to-be-split slots. For example, to split an order-9 entry, which takes
2^(9-6)=8 slots, assuming XA_CHUNK_SHIFT is 6 (!CONFIG_BASE_SMALL), 8
xa_node are needed. Instead xas_try_split() is intended to be used
iteratively to split the order-9 entry into 2 order-8 entries, then split
one order-8 entry, based on the given index, to 2 order-7 entries, ...,
and split one order-1 entry to 2 order-0 entries. When splitting the
order-6 entry and a new xa_node is needed, xas_try_split() will try to
allocate one if possible. As a result, xas_try_split() would only need 1
xa_node instead of 8.
When a new xa_node is needed during the split, xas_try_split() can try to
allocate one but no more. -ENOMEM will be return if a node cannot be
allocated. -EINVAL will be return if a sibling node is split or cascade
split happens, where two or more new nodes are needed, and these are not
supported by xas_try_split().
xas_split_alloc() and xas_split() split an order-9 to order-0:
---------------------------------
| | | | | | | | |
| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| | | | | | | | |
---------------------------------
| | | |
------- --- --- -------
| | ... | |
V V V V
----------- ----------- ----------- -----------
| xa_node | | xa_node | ... | xa_node | | xa_node |
----------- ----------- ----------- -----------
xas_try_split() splits an order-9 to order-0:
---------------------------------
| | | | | | | | |
| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| | | | | | | | |
---------------------------------
|
|
V
-----------
| xa_node |
-----------
Link: https://lkml.kernel.org/r/20250307174001.242794-1-ziy@nvidia.com
Link: https://lkml.kernel.org/r/20250307174001.242794-2-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Kairui Song <kasong@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add selftests to verify that it is possible to load freplace program
from user namespace if BPF token is initialized by bpf_object__prepare
before calling bpf_program__set_attach_target.
Negative test is added as well.
Modified type of the priv_prog to xdp, as kprobe did not work on aarch64
and s390x.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20250317174039.161275-5-mykyta.yatsenko5@gmail.com
Verify interval_tree_span_iter_xxx() helpers works as expected.
Link: https://lkml.kernel.org/r/20250310074938.26756-6-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current test use pseudo rand function with fixed seed, which means the
test data is the same pattern each time.
Add random seed parameter to randomize the test.
Link: https://lkml.kernel.org/r/20250310074938.26756-4-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "lib/interval_tree: add some test cases and cleanup", v2.
Since rbtree/augmented tree/interval tree share similar data structure,
besides new cases for interval tree, this patch set also does cleanup for
others.
This patch (of 7):
Currently we have some tests for rbtree related data structure, e.g.
rbtree, augmented rbtree, interval tree, in lib/ as kernel module.
To facilitate the test and debug for those fundamental data structure,
this patch enable those tests in userland.
Link: https://lkml.kernel.org/r/20250310074938.26756-1-richard.weiyang@gmail.com
Link: https://lkml.kernel.org/r/20250310074938.26756-2-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michel Lespinasse <michel@lespinasse.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add emulation to support Set Feature mailbox command to cxl_test.
The only feature supported is the device patrol scrub feature. The
set feature allows activation of patrol scrub for the cxl_test
emulated device. The command does not support partial data transfer
even though the spec allows it. This restriction is to reduce complexity
of the emulation given the patrol scrub feature is very minimal.
Link: https://patch.msgid.link/r/20250307205648.1021626-8-dave.jiang@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add emulation of Get Feature command to cxl_test. The feature for
device patrol scrub is returned by the emulation code. This is
the only feature currently supported by cxl_test. It returns
the information for the device patrol scrub feature.
Link: https://patch.msgid.link/r/20250307205648.1021626-7-dave.jiang@intel.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add fwctl support code to allow sending of CXL feature commands from
userspace through as ioctls via FWCTL. Provide initial setup bits. The
CXL PCI probe function will call devm_cxl_setup_fwctl() after the
cxl_memdev has been enumerated in order to setup FWCTL char device under
the cxl_memdev like the existing memdev char device for issuing CXL raw
mailbox commands from userspace via ioctls.
Link: https://patch.msgid.link/r/20250307205648.1021626-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Add CXL Features support. Setup code for enabling in kernel usage of CXL
Features. Expecting EDAC/RAS to utilize CXL Features in kernel for
things such as memory sparing. Also prepartion for enabling of CXL FWCTL
support to issue allowed Features from user space.
Add a test to the guard region self tests to assert that the
/proc/$pid/pagemap information now made availabile to the user correctly
identifies and reports guard regions.
As a part of this change, update vm_util.h to add the new bit (note there
is no header file in the kernel where this is exposed, the user is
expected to provide their own mask) and utilise the helper functions there
for pagemap functionality.
[lorenzo.stoakes@oracle.com: fixup define name]
Link: https://lkml.kernel.org/r/32e83941-e6f5-42ee-9292-a44c16463cf1@lucifer.local
Link: https://lkml.kernel.org/r/164feb0a43ae72650e6b20c3910213f469566311.1740139449.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcow (Oracle) <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's not really possible to start diagnosing this without knowing the
actual error.
Also update the mlock2 helper to behave like libc would by setting errno
and returning -1.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-12-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If running from a directory that can't be read by unprivileged users,
executing on-fault-test via the nobody user will fail.
The kselftest build does give the file the correct permissions, but after
being installed it might be in a directory without global execute
permissions.
Since the script can't safely fix that, just skip if it happens. Note
that the stderr of the `ls` command is unfiltered meaning the user sees a
"permission denied" error that can help inform them why the test was
skipped.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-11-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This test allocates a page of every available size and doesn't have any
SKIP logic if the allocation fails. So, ensure it's available and skip
the test if we can't do so.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-10-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This script must be run as root anyway (see all the writing to privileged
files in /proc etc).
Remove the unnecessary use of sudo to avoid breaking on single-user
systems that don't have sudo. This also avoids confusing readers.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-9-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Some filesystems don't support ftruncate()ing unlinked files. They return
ENOENT. In that case, skip the test.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-8-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It seems that 9pfs does not allow truncating unlinked files, Mark Brown
has noted that NFS may also behave this way.
It doesn't seem quite right to call this a "bug" but it's probably a
special enough case that it makes sense for the test to just SKIP if it
happens.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-7-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This calculation divides a fixed parameter by an environment-dependent
parameter i.e. the number of CPUs.
The simple way to avoid machine-specific failures here is to just put a
cap on the max value of the latter.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-6-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Suggested-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
So this can be debugged more easily.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-5-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A later commit will bound this variable so it no longer necessarily
matches the number of CPUs. Rename it appropriately.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-4-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's obvious that this should fail in that case, but still, save the
reader the effort of figuring out that they've run into this by just
SKIPping
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-3-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It's pretty obvious that the test wouldn't work if you don't have the
feature enabled. But, it's still useful to SKIP instead of failing so the
reader can immediately tell that this is the reason why.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-2-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: Some cleanups from trying to run them", v4.
I never had much luck running mm selftests so I spent a few hours digging
into why.
Looks like most of the reason is missing SKIP checks, so this series is
just adding a bunch of those that I found. I did not do anything like all
of them, just the ones I spotted in gup_longterm, gup_test, mmap,
userfaultfd and memfd_secret.
It's a bit unfortunate to have to skip those tests when ftruncate() fails,
but I don't have time to dig deep enough into it to actually make them
pass. I have observed the issue on 9pfs and heard rumours that NFS has a
similar problem.
I'm now able to run these test groups successfully:
- mmap
- gup_test
- compaction
- migration
- page_frag
- userfaultfd
- mlock
I've never gone past "Waiting for hugetlb memory to get depleted", in the
hugetlb tests. I don't know if they are stuck or if they would eventually
work if I was patient enough (testing on a 1G machine). I have not
investigated further.
I had some issues with mlock tests failing due to -ENOSRCH from mlock2(),
I can no longer reproduce that though, things work OK now.
Of the remaining tests there may be others that work fine, but there's no
convenient way to survey the whole output of run_vmtests.sh so I'm just
going test by test here.
In my spare moments I am slowly chipping away at a setup to run these
tests continuously in a reasonably hermetic QEMU environment via
virtme-ng:
5fad4b9c59/README.md
Hopefully that will eventually offer a way to provide a "canned"
environment where the tests are known to work, which can be fairly easily
reproduced by any developer.
This patch (of 12):
Just reporting failure doesn't tell you what went wrong. This can fail in
different ways so report errno to help the reader get started debugging.
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-0-dec210a658f5@google.com
Link: https://lkml.kernel.org/r/20250311-mm-selftests-v4-1-dec210a658f5@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To enable SLAB_TYPESAFE_BY_RCU for vma cache we need to ensure that
object reuse before RCU grace period is over will be detected by
lock_vma_under_rcu().
Current checks are sufficient as long as vma is detached before it is
freed. The only place this is not currently happening is in exit_mmap().
Add the missing vma_mark_detached() in exit_mmap().
Another issue which might trick lock_vma_under_rcu() during vma reuse is
vm_area_dup(), which copies the entire content of the vma into a new one,
overriding new vma's vm_refcnt and temporarily making it appear as
attached. This might trick a racing lock_vma_under_rcu() to operate on a
reused vma if it found the vma before it got reused. To prevent this
situation, we should ensure that vm_refcnt stays at detached state (0)
when it is copied and advances to attached state only after it is added
into the vma tree. Introduce vm_area_init_from() which preserves new
vma's vm_refcnt and use it in vm_area_dup(). Since all vmas are in
detached state with no current readers when they are freed,
lock_vma_under_rcu() will not be able to take vm_refcnt after vma got
detached even if vma is reused. vma_mark_attached() in modified to
include a release fence to ensure all stores to the vma happen before
vm_refcnt gets initialized.
Finally, make vm_area_cachep SLAB_TYPESAFE_BY_RCU. This will facilitate
vm_area_struct reuse and will minimize the number of call_rcu() calls.
[surenb@google.com: remove atomic_set_release() usage in tools/]
Link: https://lkml.kernel.org/r/20250217054351.2973666-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250213224655.1680278-18-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
rw_semaphore is a sizable structure of 40 bytes and consumes considerable
space for each vm_area_struct. However vma_lock has two important
specifics which can be used to replace rw_semaphore with a simpler
structure:
1. Readers never wait. They try to take the vma_lock and fall back to
mmap_lock if that fails.
2. Only one writer at a time will ever try to write-lock a vma_lock
because writers first take mmap_lock in write mode. Because of these
requirements, full rw_semaphore functionality is not needed and we can
replace rw_semaphore and the vma->detached flag with a refcount
(vm_refcnt).
When vma is in detached state, vm_refcnt is 0 and only a call to
vma_mark_attached() can take it out of this state. Note that unlike
before, now we enforce both vma_mark_attached() and vma_mark_detached() to
be done only after vma has been write-locked. vma_mark_attached() changes
vm_refcnt to 1 to indicate that it has been attached to the vma tree.
When a reader takes read lock, it increments vm_refcnt, unless the top
usable bit of vm_refcnt (0x40000000) is set, indicating presence of a
writer. When writer takes write lock, it sets the top usable bit to
indicate its presence. If there are readers, writer will wait using newly
introduced mm->vma_writer_wait. Since all writers take mmap_lock in write
mode first, there can be only one writer at a time. The last reader to
release the lock will signal the writer to wake up. refcount might
overflow if there are many competing readers, in which case read-locking
will fail. Readers are expected to handle such failures.
In summary:
1. all readers increment the vm_refcnt;
2. writer sets top usable (writer) bit of vm_refcnt;
3. readers cannot increment the vm_refcnt if the writer bit is set;
4. in the presence of readers, writer must wait for the vm_refcnt to drop
to 1 (plus the VMA_LOCK_OFFSET writer bit), indicating an attached vma
with no readers;
5. vm_refcnt overflow is handled by the readers.
While this vm_lock replacement does not yet result in a smaller
vm_area_struct (it stays at 256 bytes due to cacheline alignment), it
allows for further size optimization by structure member regrouping to
bring the size of vm_area_struct below 192 bytes.
[surenb@google.com: fix a crash due to vma_end_read() that should have been removed]
Link: https://lkml.kernel.org/r/20250220200208.323769-1-surenb@google.com
Link: https://lkml.kernel.org/r/20250213224655.1680278-13-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
vma_iter_store() functions can be used both when adding a new vma and when
updating an existing one. However for existing ones we do not need to
mark them attached as they are already marked that way. With
vma->detached being a separate flag, double-marking a vmas as attached or
detached is not an issue because the flag will simply be overwritten with
the same value. However once we fold this flag into the refcount later in
this series, re-attaching or re-detaching a vma becomes an issue since
these operations will be incrementing/decrementing a refcount.
Introduce vma_iter_store_new() and vma_iter_store_overwrite() to replace
vma_iter_store() and avoid re-attaching a vma during vma update. Add
assertions in vma_mark_attached()/vma_mark_detached() to catch invalid
usage. Update vma tests to check for vma detached state correctness.
Link: https://lkml.kernel.org/r/20250213224655.1680278-5-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Current implementation does not set detached flag when a VMA is first
allocated. This does not represent the real state of the VMA, which is
detached until it is added into mm's VMA tree. Fix this by marking new
VMAs as detached and resetting detached flag only after VMA is added into
a tree.
Introduce vma_mark_attached() to make the API more readable and to
simplify possible future cleanup when vma->vm_mm might be used to indicate
detached vma and vma_mark_attached() will need an additional mm parameter.
Link: https://lkml.kernel.org/r/20250213224655.1680278-4-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Back when per-vma locks were introduces, vm_lock was moved out of
vm_area_struct in [1] because of the performance regression caused by
false cacheline sharing. Recent investigation [2] revealed that the
regressions is limited to a rather old Broadwell microarchitecture and
even there it can be mitigated by disabling adjacent cacheline
prefetching, see [3].
Splitting single logical structure into multiple ones leads to more
complicated management, extra pointer dereferences and overall less
maintainable code. When that split-away part is a lock, it complicates
things even further. With no performance benefits, there are no reasons
for this split. Merging the vm_lock back into vm_area_struct also allows
vm_area_struct to use SLAB_TYPESAFE_BY_RCU later in this patchset. Move
vm_lock back into vm_area_struct, aligning it at the cacheline boundary
and changing the cache to be cacheline-aligned as well. With kernel
compiled using defconfig, this causes VMA memory consumption to grow from
160 (vm_area_struct) + 40 (vm_lock) bytes to 256 bytes:
slabinfo before:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vma_lock ... 40 102 1 : ...
vm_area_struct ... 160 51 2 : ...
slabinfo after moving vm_lock:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vm_area_struct ... 256 32 2 : ...
Aggregate VMA memory consumption per 1000 VMAs grows from 50 to 64 pages,
which is 5.5MB per 100000 VMAs. Note that the size of this structure is
dependent on the kernel configuration and typically the original size is
higher than 160 bytes. Therefore these calculations are close to the
worst case scenario. A more realistic vm_area_struct usage before this
change is:
<name> ... <objsize> <objperslab> <pagesperslab> : ...
vma_lock ... 40 102 1 : ...
vm_area_struct ... 176 46 2 : ...
Aggregate VMA memory consumption per 1000 VMAs grows from 54 to 64 pages,
which is 3.9MB per 100000 VMAs. This memory consumption growth can be
addressed later by optimizing the vm_lock.
[1] https://lore.kernel.org/all/20230227173632.3292573-34-surenb@google.com/
[2] https://lore.kernel.org/all/ZsQyI%2F087V34JoIt@xsang-OptiPlex-9020/
[3] https://lore.kernel.org/all/CAJuCfpEisU8Lfe96AYJDZ+OM4NoPmnw9bP53cT_kbfP_pR+-2g@mail.gmail.com/
Link: https://lkml.kernel.org/r/20250213224655.1680278-3-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Tested-by: Shivank Garg <shivankg@amd.com>
Link: https://lkml.kernel.org/r/5e19ec93-8307-47c2-bb13-3ddf7150624e@amd.com
Cc: Christian Brauner <brauner@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jann Horn <jannh@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Klara Modin <klarasmodin@gmail.com>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend the guard region self tests to explicitly assert that guard regions
work correctly for functionality specific to file-backed and shmem
mappings.
In addition to testing all of the existing guard region functionality that
is currently tested against anonymous mappings against file-backed and
shmem mappings (except those which are exclusive to anonymous mapping), we
now also:
* Test that MADV_SEQUENTIAL does not cause unexpected readahead behaviour.
* Test that MAP_PRIVATE behaves as expected with guard regions installed in
both a shared and private mapping of an fd.
* Test that a read-only file can correctly establish guard regions.
* Test a probable fault-around case does not interfere with guard regions
(or vice-versa).
* Test that truncation does not eliminate guard regions.
* Test that hole punching functions as expected in the presence of guard
regions.
* Test that a read-only mapping of a memfd write sealed mapping can have
guard regions established within it and function correctly without
violation of the seal.
* Test that guard regions installed into a mapping of the anonymous zero
page function correctly.
Link: https://lkml.kernel.org/r/90c16bec5fcaafcd1700dfa3e9988c3e1aa9ac1d.1739469950.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Extend the guard region tests to allow for test fixture variants for anon,
shmem, and local file files.
This allows us to assert that each of the expected behaviours of anonymous
memory also applies correctly to file-backed (both shmem and an a file
created locally in the current working directory) and thus asserts the
same correctness guarantees as all the remaining tests do.
The fixture teardown is now performed in the parent process rather than
child forked ones, meaning cleanup is always performed, including
unlinking any generated temporary files.
Additionally the variant fixture data type now contains an enum value
indicating the type of backing store and the mmap() invocation is
abstracted to allow for the mapping of whichever backing store the variant
is testing.
We adjust tests as necessary to account for the fact they may now
reference files rather than anonymous memory.
Link: https://lkml.kernel.org/r/ab42228d2bd9b8aa18e9faebcd5c88732a7e5820.1739469950.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The feature formerly referred to as guard pages is more correctly referred
to as 'guard regions', as in fact no pages are ever allocated in the
process of installing the regions.
To avoid confusion, rename the tests accordingly.
[lorenzo.stoakes@oracle.com: fix guard regions invocation]
Link: https://lkml.kernel.org/r/13426c71-d069-4407-9340-b227ff8b8736@lucifer.local
Link: https://lkml.kernel.org/r/1c3cd04a3f69b5756b94bda701ac88325a9be18b.1739469950.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: "Paul E . McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently the mm selftests refuse to run if huge pages are not available
in the current system but this is an optional feature and not all the
tests actually require them. Change the test during startup to be
non-fatal and skip or omit tests which actually rely on having huge pages,
allowing the other tests to be run.
The gup_test does support using madvise() to configure huge pages but it
ignores the error code so we just let it run.
Link: https://lkml.kernel.org/r/20250212-kselftest-mm-no-hugepages-v1-2-44702f538522@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The thuge-gen test_mmap() and test_shmget() tests are repeatedly run for a
variety of sizes but always report the result of their test with the same
name, meaning that automated sysetms running the tests are unable to
distinguish between the various tests. Add the supplied sizes to the
logged test names to distinguish between runs.
My test automation was getting pretty confused about what was going on
- the test names are a pretty important external interface.
Link: https://lkml.kernel.org/r/20250204-kselftest-mm-fix-dups-v1-1-6afe417ef4bb@kernel.org
Fixes: b38bd9b2c4 ("selftests/mm: thuge-gen: conform to TAP format output")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The adj_start calculation has been a constant source of confusion in the
VMA merge code.
There are two cases to consider, one where we adjust the start of the
vmg->middle VMA (i.e. the vmg->__adjust_middle_start merge flag is set),
in which case adj_start is calculated as:
(1) adj_start = vmg->end - vmg->middle->vm_start
And the case where we adjust the start of the vmg->next VMA (i.e. the
vmg->__adjust_next_start merge flag is set), in which case adj_start is
calculated as:
(2) adj_start = -(vmg->middle->vm_end - vmg->end)
We apply (1) thusly:
vmg->middle->vm_start =
vmg->middle->vm_start + vmg->end - vmg->middle->vm_start
Which simplifies to:
vmg->middle->vm_start = vmg->end
Similarly, we apply (2) as:
vmg->next->vm_start =
vmg->next->vm_start + -(vmg->middle->vm_end - vmg->end)
Noting that for these VMAs to be mergeable vmg->middle->vm_end ==
vmg->next->vm_start and so this simplifies to:
vmg->next->vm_start =
vmg->next->vm_start + -(vmg->next->vm_start - vmg->end)
Which simplifies to:
vmg->next->vm_start = vmg->end
Therefore in each case, we simply need to adjust the start of the VMA to
vmg->end (!) and can do away with this adj_start calculation. The only
caveat is that we must ensure we update the vm_pgoff field correctly.
We therefore abstract this entire calculation to a new function
vmg_adjust_set_range() which performs this calculation and sets the
adjusted VMA's new range using the general vma_set_range() function.
We also must update vma_adjust_trans_huge() which expects the
now-abstracted adj_start parameter. It turns out this is wholly
unnecessary.
In vma_adjust_trans_huge() the relevant code is:
if (adjust_next > 0) {
struct vm_area_struct *next = find_vma(vma->vm_mm, vma->vm_end);
unsigned long nstart = next->vm_start;
nstart += adjust_next;
split_huge_pmd_if_needed(next, nstart);
}
The only case where this is relevant is when vmg->__adjust_middle_start is
specified (in which case adj_next would have been positive), i.e. the one
in which the vma specified is vmg->prev and this the sought 'next' VMA
would be vmg->middle.
We can therefore eliminate the find_vma() invocation altogether and simply
provide the vmg->middle VMA in this instance, or NULL otherwise.
Again we have an adj_next offset calculation:
next->vm_start + vmg->end - vmg->middle->vm_start
Where next == vmg->middle this simplifies to vmg->end as previously
demonstrated.
Therefore nstart is equal to vmg->end, which is already passed to
vma_adjust_trans_huge() via the 'end' parameter and so this code (rather
delightfully) simplifies to:
if (next)
split_huge_pmd_if_needed(next, end);
With these changes in place, it becomes silly for commit_merge() to return
vmg->target, as it is always the same and threaded through vmg, so we
finally change commit_merge() to return an error value once again.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/7bce2cd4b5afb56211822835d145471280c3dccc.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Introduce internal vmg->__adjust_middle_start and vmg->__adjust_next_start
merge flags, enabling us to indicate to commit_merge() that we are
performing a merge which either spans only part of vmg->middle, or part of
vmg->next respectively.
In the former instance, we change the start of vmg->middle to match the
attributes of vmg->prev, without spanning all of vmg->middle.
This implies that vmg->prev->vm_end and vmg->middle->vm_start are both
increased to form the new merged VMA (vmg->prev) and the new subsequent
VMA (vmg->middle).
In the latter case, we change the end of vmg->middle to match the
attributes of vmg->next, without spanning all of vmg->next.
This implies that vmg->middle->vm_end and vmg->next->vm_start are both
decreased to form the new merged VMA (vmg->next) and the new prior VMA
(vmg->middle).
Since we now have a stable set of prev, middle, next VMAs threaded through
vmg and with these flags set know what is happening, we can perform the
calculation in commit_merge() instead.
This allows us to drop the confusing adj_start parameter and instead pass
semantic information to commit_merge().
In the latter case the -(middle->vm_end - start) calculation becomes
-(middle->vm-end - vmg->end), however this is correct as vmg->end is set
to the start parameter.
This is because in this case (rather confusingly), we manipulate
vmg->middle, but ultimately return vmg->next, whose range will be
correctly specified. At this point vmg->start, end is the new range for
the prior VMA rather than the merged one.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/bcec0cd980b373a5eb02236cb033034ce1effe42.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The current VMA merge mechanism contains a number of confusing mechanisms
around removal of VMAs on merge and the shrinking of the VMA adjacent to
vma->target in the case of merges which result in a partial merge with
that adjacent VMA.
Since we now have a STABLE set of VMAs - prev, middle, next - we are now
able to have the caller of commit_merge() explicitly tell us which VMAs
need deleting, using newly introduced internal VMA merge flags.
Doing so allows us to embed this state within the VMG and remove the
confusing remove, remove2 parameters from commit_merge().
We additionally are able to eliminate the highly confusing and misleading
'expanded' parameter - a parameter that in reality refers to whether or
not the return VMA is the target one or the one immediately adjacent.
We can infer which is the case from whether or not the adj_start parameter
is negative. This also allows us to simplify further logic around
iterator configuration and VMA iterator stores.
Doing so means we can also eliminate the adjust parameter, as we are able
to infer which VMA ought to be adjusted from adj_start - a positive value
implies we adjust the start of 'middle', a negative one implies we adjust
the start of 'next'.
We are then able to have commit_merge() explicitly return the target VMA,
or NULL on inability to pre-allocate memory. Errors were previously
filtered so behaviour does not change.
We additionally move from the slightly odd use of a bitwise-flag enum
vmg->merge_flags field to vmg bitfields.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/7bf2ed24af68aac18672b7acebbd9102f48c5b03.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: further simplify VMA merge operation", v3.
While significant efforts have been made to improve the VMA merge
operation, there remains remnants of the bad (or rather confusing) old
days, which make the code difficult to understand, more bug prone and thus
harder to modify.
This series attempts to significantly improve matters in a number of
respects - with a focus on simplifying the commit_merge() function which
actually actions the merge operation - and importantly, adjusting the two
most confusing merge cases - those in which we 'adjust' the VMA
immediately adjacent to the one being merged.
One source of confusion are the VMAs being threaded through the operation
themselves - vmg->prev, vmg->vma and vmg->next.
At the start of the operation, vmg->vma is either NULL if a new VMA is
propose to be added, or if not then a pointer to an existing VMA being
modified, and prev/next are (perhaps not present) VMAs sat immediately
before and after the range specified in vmg->start, end, respectively.
However, during the VMA merge operation, we change vmg->start, end and
pgoff to span the newly merged range and vmg->vma to either be:
a. The ultimately returned VMA (in most cases) or b. A VMA which we will
manipulate, but ultimately instead return vmg->next.
Case b. especially here is confusing for somebody reading this code, but
the fact we update this state, along with vmg->start, end, pgoff only
makes matters worse.
We simplify things by replacing vmg->vma with vmg->middle and never
changing it - this is always either NULL (for a new VMA) or the VMA being
modified between vmg->prev and vmg->next.
We further simplify by placing the merged VMA in a new vmg->target field -
whether case b. above is the case or not. The reader of the code can now
simply rely on vmg->middle being the middle VMA and vmg->target being the
ultimately merged VMA.
We additionally tackle the confusing cases where we 'adjust' VMAs other
than the one we ultimately return as the merged VMA (this includes case b.
above). These are:
(1)
merge
<----------->
|------||--------| |------------|---|
| prev || middle | -> | target | m |
|------||--------| |------------|---|
In which case middle must be adjusted so middle->vm_start is increased as
well as performing the merge.
(2) (equivalent to case b. above)
<------------->
|---------||------| |---|-------------|
| middle || next | -> | m | target |
|---------||------| |---|-------------|
In which case next must be adjusted so next->vm_start is decreased as well
as performing the merge.
This cases have previously been performed by calculating and passing
around a dubious and confusing 'adj_start' parameter along side a pointer
to an 'adjust' VMA indicating which VMA requires additional adjustment
(middle in case 1 and next in case 2).
With the VMG structure in place we are able to avoid this by simply
setting a merge flag to describe each case:
(1) Sets the vmg->__adjust_middle_start flag
(2) Sets the vmg->__adjust_next_start flag
By doing so it turns out we can vastly simplify the logic and calculate
what is required to perform the operation.
Taken together the refactorings make it far easier to understand what is
being done even in these more confusing cases, make the code far more
maintainable, debuggable, and testable, providing more internal state
indicating what is happening in the merge operation.
The changes have no functional net impact on the merge operation and
everything should still behave as it did before.
This patch (of 5):
The merge code, while much improved, still has a number of points of
confusion. As part of a broader series cleaning this up to make this more
maintainable, we start by addressing some confusion around
vma_merge_struct fields.
So far, the caller either provides no vmg->vma (a new VMA) or supplies the
existing VMA which is being altered, setting vmg->start,end,pgoff to the
proposed VMA dimensions.
vmg->vma is then updated, as are vmg->start,end,pgoff as the merge process
proceeds and the appropriate merge strategy is determined.
This is rather confusing, as vmg->vma starts off as the 'middle' VMA
between vmg->prev,next, but becomes the 'target' VMA, except in one
specific edge case (merge next, shrink middle).
Int his patch we introduce vmg->middle to describe the VMA that is between
vmg->prev and vmg->next, and does NOT change during the merge operation.
We replace vmg->vma with vmg->target, and use this only during the merge
operation itself.
Aside from the merge right, shrink middle case, this becomes the VMA that
forms the basis of the VMA that is returned. This edge case can be
addressed in a future commit.
We also add a number of comments to explain what is going on.
Finally, we adjust the ASCII diagrams showing each merge case in
vma_merge_existing_range() to be clearer - the arrow range previously
showed the vmg->start, end spanned area, but it is clearer to change this
to show the final merged VMA.
This patch has no change in functional behaviour.
Link: https://lkml.kernel.org/r/cover.1738326519.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/4dfe60f1419d55e5d0516f56349695d73a57184c.1738326519.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now split_huge_page*() supports shmem THP split to any lower order. Test
it.
The test now reads file content out after split to check if the split
corrupts the file data.
Link: https://lkml.kernel.org/r/20250122161928.1240637-3-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Tested-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit acd7ccb284 ("mm: shmem: add large folio support for tmpfs")
changes huge=always to allocate THP/mTHP based on write size and
split_huge_page_test does not write PMD size data, so file-back THP is not
created during the test. Fix it by writing PMD size data.
Link: https://lkml.kernel.org/r/20250122161928.1240637-1-ziy@nvidia.com
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shuemov <kirill.shutemov@linux.intel.com>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We noticed that uffd-stress test was always failing to run when invoked
for the hugetlb profiles on x86_64 systems with a processor count of 64 or
bigger:
...
# ------------------------------------
# running ./uffd-stress hugetlb 128 32
# ------------------------------------
# ERROR: invalid MiB (errno=9, @uffd-stress.c:459)
...
# [FAIL]
not ok 3 uffd-stress hugetlb 128 32 # exit=1
...
The problem boils down to how run_vmtests.sh (mis)calculates the size of
the region it feeds to uffd-stress. The latter expects to see an amount
of MiB while the former is just giving out the number of free hugepages
halved down. This measurement discrepancy ends up violating uffd-stress'
assertion on number of hugetlb pages allocated per CPU, causing it to bail
out with the error above.
This commit fixes that issue by adjusting run_vmtests.sh's
half_ufd_size_MB calculation so it properly renders the region size in
MiB, as expected, while maintaining all of its original constraints in
place.
Link: https://lkml.kernel.org/r/20250218192251.53243-1-aquini@redhat.com
Fixes: 2e47a445d7 ("selftests/mm: run_vmtests.sh: fix hugetlb mem size calculation")
Signed-off-by: Rafael Aquini <raquini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add test to check for the infinite loop caused by the inability
to parse a late test plan.
The test parses the following output:
TAP version 13
ok 4 test4
1..4
Link: https://lore.kernel.org/r/20250313192714.1380005-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
A bug was identified where the KTAP below caused an infinite loop:
TAP version 13
ok 4 test_case
1..4
The infinite loop was caused by the parser not parsing a test plan
if following a test result line.
Fix this bug by parsing test plan line to avoid the infinite loop.
Link: https://lore.kernel.org/r/20250313192714.1380005-1-rmoar@google.com
Signed-off-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <shuah@kernel.org>
The SO_RCVLOWAT option is defined as 18 in the selftest header,
which matches the generic definition. However, on powerpc,
SO_RCVLOWAT is defined as 16. This discrepancy causes
sol_socket_sockopt() to fail with the default switch case on powerpc.
This commit fixes by defining SO_RCVLOWAT as 16 for powerpc.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20250311084647.3686544-1-skb99@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The strncmp benchmark uses the bpf_strncmp helper and a hand-written
loop to compare two strings. The values of the strings are filled from
userspace. One of the strings is non-const (in .bss) while the other is
const (in .rodata) since that is the requirement of bpf_strncmp.
The problem is that in the hand-written loop, Clang optimizes the reads
from the const string to always return 0 which breaks the benchmark.
Use barrier_var to prevent the optimization.
The effect can be seen on the strncmp-no-helper variant.
Before this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 (112.309us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 1 (-23.238us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 2 ( 58.994us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 3 (-30.466us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 4 ( 29.996us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 5 ( 16.949us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Iter 6 (-60.035us): hits 0.000M/s ( 0.000M/prod), drops 0.000M/s, total operations 0.000M/s
Summary: hits 0.000 ± 0.000M/s ( 0.000M/prod), drops 0.000 ± 0.000M/s, total operations 0.000 ± 0.000M/s
After this change:
# ./bench strncmp-no-helper
Setting up benchmark 'strncmp-no-helper'...
Benchmark 'strncmp-no-helper' started.
Iter 0 ( 77.711us): hits 5.534M/s ( 5.534M/prod), drops 0.000M/s, total operations 5.534M/s
Iter 1 ( 11.215us): hits 6.006M/s ( 6.006M/prod), drops 0.000M/s, total operations 6.006M/s
Iter 2 (-14.253us): hits 5.931M/s ( 5.931M/prod), drops 0.000M/s, total operations 5.931M/s
Iter 3 ( 59.087us): hits 6.005M/s ( 6.005M/prod), drops 0.000M/s, total operations 6.005M/s
Iter 4 (-21.379us): hits 6.010M/s ( 6.010M/prod), drops 0.000M/s, total operations 6.010M/s
Iter 5 (-20.310us): hits 5.861M/s ( 5.861M/prod), drops 0.000M/s, total operations 5.861M/s
Iter 6 ( 53.937us): hits 6.004M/s ( 6.004M/prod), drops 0.000M/s, total operations 6.004M/s
Summary: hits 5.969 ± 0.061M/s ( 5.969M/prod), drops 0.000 ± 0.000M/s, total operations 5.969 ± 0.061M/s
Fixes: 9c42652f8b ("selftests/bpf: Add benchmark for bpf_strncmp() helper")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/bpf/20250313122852.1365202-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Venkat reported a compilation error for BPF selftests on PowerPC [0].
The crux of the error is the following message:
In file included from progs/arena_spin_lock.c:7:
/root/bpf-next/tools/testing/selftests/bpf/bpf_arena_spin_lock.h:122:8:
error: member reference base type '__attribute__((address_space(1)))
u32' (aka '__attribute__((address_space(1))) unsigned int') is not a
structure or union
122 | old = atomic_read(&lock->val);
This is because PowerPC overrides the qspinlock type changing the
lock->val member's type from atomic_t to u32.
To remedy this, import the asm-generic version in the arena spin lock
header, name it __qspinlock (since it's aliased to arena_spinlock_t, the
actual name hardly matters), and adjust the selftest to not depend on
the type in vmlinux.h.
[0]: https://lore.kernel.org/bpf/7bc80a3b-d708-4735-aa3b-6a8c21720f9d@linux.ibm.com
Fixes: 88d706ba7c ("selftests/bpf: Introduce arena spin lock")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Link: https://lore.kernel.org/bpf/20250311154244.3775505-1-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This test exercises the kernel flag added to security_bpf by
effectively blocking light-skeletons from loading while allowing
normal skeletons to function as-is. Since this should work with any
arbitrary BPF program, an existing program from LSKELS_EXTRA was
used as a test payload.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250310221737.821889-3-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Certain bpf syscall subcommands are available for usage from both
userspace and the kernel. LSM modules or eBPF gatekeeper programs may
need to take a different course of action depending on whether or not
a BPF syscall originated from the kernel or userspace.
Additionally, some of the bpf_attr struct fields contain pointers to
arbitrary memory. Currently the functionality to determine whether or
not a pointer refers to kernel memory or userspace memory is exposed
to the bpf verifier, but that information is missing from various LSM
hooks.
Here we augment the LSM hooks to provide this data, by simply passing
a boolean flag indicating whether or not the call originated in the
kernel, in any hook that contains a bpf_attr struct that corresponds
to a subcommand that may be called from the kernel.
Signed-off-by: Blaise Boscaccy <bboscaccy@linux.microsoft.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://lore.kernel.org/r/20250310221737.821889-2-bboscaccy@linux.microsoft.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/bpf/20250310032045.651068-1-nichen@iscas.ac.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The Makefile uses the exit code of the `llvm-config --link-static --libs`
command to choose between statically-linked and dynamically-linked LLVMs.
The stdout and stderr of that command are redirected to /dev/null.
To redirect the output the "&>" construction is used, which might not be
supported by /bin/sh, which is executed by make for $(shell ...) commands.
On such systems the test will fail even if static LLVM is actually
supported. Replace "&>" by ">/dev/null 2>&1" to fix this.
Fixes: 2a9d30fac8 ("selftests/bpf: Support dynamically linking LLVM if static is not available")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/bpf/20250310145112.1261241-1-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF cpumask selftests are currently run twice in
test_progs/cpumask.c, once by traversing cpumask_success_testcases, and
once by invoking RUN_TESTS(cpumask_success). Remove the invocation of
RUN_TESTS to properly run the selftests only once.
Now that the tests are run only through cpumask_success_testscases, add
to it the missing test_refcount_null_tracking testcase. Also remove the
__success annotation from it, since it is now loaded and invoked by the
runner.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250309230427.26603-5-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add selftests for the bpf_cpumask_populate helper that sets a
bpf_cpumask to a bit pattern provided by a BPF program.
Signed-off-by: Emil Tsalapatis (Meta) <emil@etsalapatis.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20250309230427.26603-3-emil@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_lwt_seg6local.sh isn't used by the BPF CI.
Add a new file in the test_progs framework to migrate the tests done by
test_lwt_seg6local.sh. It uses the same network topology and the same BPF
programs located in progs/test_lwt_seg6local.c.
Use the network helpers instead of `nc` to exchange the final packet.
Remove test_lwt_seg6local.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250307-seg6local-v1-2-990fff8f180d@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some routes in fb00:: are initialized during setup, even though they
aren't needed by the test as the UDP packets will travel through the
lightweight tunnels.
Remove these unnecessary routes.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250307-seg6local-v1-1-990fff8f180d@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The caller of cap_enable_effective() expects negative error code.
Fix it.
Before:
failed to restore CAP_SYS_ADMIN: -1, Unknown error -1
After:
failed to restore CAP_SYS_ADMIN: -3, No such process
failed to restore CAP_SYS_ADMIN: -22, Invalid argument
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250305022234.44932-1-yangfeng59949@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Traffic monitor thread may see dangling stdout as the main thread closes
and reassigns stdout without protection. This happens when the main thread
finishes one subtest and moves to another one in the same netns_new()
scope.
The issue can be reproduced by running test_progs repeatedly with traffic
monitor enabled:
for ((i=1;i<=100;i++)); do
./test_progs -a flow_dissector_skb* -m '*'
done
For restoring stdout in crash_handler(), since it does not really care
about closing stdout, simlpy flush stdout and restore it to the original
one.
Then, Fix the issue by consolidating stdio_restore_cleanup() and
stdio_restore(), and protecting the use/close/assignment of stdout with
a lock. The locking in the main thread is always performed regradless of
whether traffic monitor is running or not for simplicity. It won't have
any side-effect.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20250305182057.2802606-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow users to change traffic monitor's print function. If not provided,
traffic monitor will print to stdout by default.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305182057.2802606-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
reset_affinity() and save_ns() are only called in run_one_test(). There is
no need to call stdio_restore() in reset_affinity() and save_ns() if
stdio_restore() is moved right after a test finishes in run_one_test().
Also remove an unnecessary check of env.stdout_saved in crash_handler()
by moving env.stdout_saved assignment to the beginning of main().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/20250305182057.2802606-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_lwt_ip_encap.sh isn't used by the BPF CI.
Add a new file in the test_progs framework to migrate the tests done by
test_lwt_ip_encap.sh. It uses the same network topology and the same BPF
programs located in progs/test_lwt_ip_encap.c.
Rework the GSO part to avoid using nc and dd.
Remove test_lwt_ip_encap.sh and its Makefile entry.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250304-lwt_ip-v1-1-8fdeb9e79a56@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add some basic selftests for qspinlock built over BPF arena using
cond_break_label macro.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement queued spin lock algorithm as BPF program for lock words
living in BPF arena.
The algorithm is copied from kernel/locking/qspinlock.c and adapted for
BPF use.
We first implement abstract helpers for portable atomics and
acquire/release load instructions, by relying on X86_64 presence to
elide expensive barriers and rely on implementation details of the JIT,
and fall back to slow but correct implementations elsewhere. When
support for acquire/release load/stores lands, we can improve this
state.
Then, the qspinlock algorithm is adapted to remove dependence on
multi-word atomics due to lack of support in BPF ISA. For instance,
xchg_tail cannot use 16-bit xchg, and needs to be a implemented as a
32-bit try_cmpxchg loop.
Loops which are seemingly infinite from verifier PoV are annotated with
cond_break_label macro to return an error. Only 1024 NR_CPUs are
supported.
Note that the slow path is a global function, hence the verifier doesn't
know the return value's precision. The recommended way of usage is to
always test against zero for success, and not ret < 0 for error, as the
verifier would assume ret > 0 has not been accounted for. Add comments
in the function documentation about this quirk.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new cond_break_label macro that jumps to the specified label when
the cond_break termination check fires, and allows us to better handle
the uncontrolled termination of the loop.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250306035431.2186189-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
may_goto instruction does not use any registers,
but in compute_insn_live_regs() it was treated as a regular
conditional jump of kind BPF_K with r0 as source register.
Thus unnecessarily marking r0 as used.
Fixes: 14c8552db6 ("bpf: simple DFA-based live registers analysis")
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250305085436.2731464-1-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Compute may-live registers before each instruction in the program.
The register is live before the instruction I if it is read by I or
some instruction S following I during program execution and is not
overwritten between I and S.
This information would be used in the next patch as a hint in
func_states_equal().
Use a simple algorithm described in [1] to compute this information:
- define the following:
- I.use : a set of all registers read by instruction I;
- I.def : a set of all registers written by instruction I;
- I.in : a set of all registers that may be alive before I execution;
- I.out : a set of all registers that may be alive after I execution;
- I.successors : a set of instructions S that might immediately
follow I for some program execution;
- associate separate empty sets 'I.in' and 'I.out' with each instruction;
- visit each instruction in a postorder and update corresponding
'I.in' and 'I.out' sets as follows:
I.out = U [S.in for S in I.successors]
I.in = (I.out / I.def) U I.use
(where U stands for set union, / stands for set difference)
- repeat the computation while I.{in,out} changes for any instruction.
On implementation side keep things as simple, as possible:
- check_cfg() already marks instructions EXPLORED in post-order,
modify it to save the index of each EXPLORED instruction in a vector;
- represent I.{in,out,use,def} as bitmasks;
- don't split the program into basic blocks and don't maintain the
work queue, instead:
- do fixed-point computation by visiting each instruction;
- maintain a simple 'changed' flag if I.{in,out} for any instruction
change;
Measurements show that even such simplistic implementation does not
add measurable verification time overhead (for selftests, at-least).
Note on check_cfg() ex_insn_beg/ex_done change:
To avoid out of bounds access to env->cfg.insn_postorder array,
it should be guaranteed that instruction transitions to EXPLORED state
only once. Previously this was not the fact for incorrect programs
with direct calls to exception callbacks.
The 'align' selftest needs adjustment to skip computed insn/live
registers printout. Otherwise it matches lines from the live registers
printout.
[1] https://en.wikipedia.org/wiki/Live-variable_analysis
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250304195024.2478889-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add several ./test_progs tests:
- arena_atomics/load_acquire
- arena_atomics/store_release
- verifier_load_acquire/*
- verifier_store_release/*
- verifier_precision/bpf_load_acquire
- verifier_precision/bpf_store_release
The last two tests are added to check if backtrack_insn() handles the
new instructions correctly.
Additionally, the last test also makes sure that the verifier
"remembers" the value (in src_reg) we store-release into e.g. a stack
slot. For example, if we take a look at the test program:
#0: r1 = 8;
/* store_release((u64 *)(r10 - 8), r1); */
#1: .8byte %[store_release];
#2: r1 = *(u64 *)(r10 - 8);
#3: r2 = r10;
#4: r2 += r1;
#5: r0 = 0;
#6: exit;
At #1, if the verifier doesn't remember that we wrote 8 to the stack,
then later at #4 we would be adding an unbounded scalar value to the
stack pointer, which would cause the program to be rejected:
VERIFIER LOG:
=============
...
math between fp pointer and register with unbounded min value is not allowed
For easier CI integration, instead of using built-ins like
__atomic_{load,store}_n() which depend on the new
__BPF_FEATURE_LOAD_ACQ_STORE_REL pre-defined macro, manually craft
load-acquire/store-release instructions using __imm_insn(), as suggested
by Eduard.
All new tests depend on:
(1) Clang major version >= 18, and
(2) ENABLE_ATOMICS_TESTS is defined (currently implies -mcpu=v3 or
v4), and
(3) JIT supports load-acquire/store-release (currently arm64 and
x86-64)
In .../progs/arena_atomics.c:
/* 8-byte-aligned */
__u8 __arena_global load_acquire8_value = 0x12;
/* 1-byte hole */
__u16 __arena_global load_acquire16_value = 0x1234;
That 1-byte hole in the .addr_space.1 ELF section caused clang-17 to
crash:
fatal error: error in backend: unable to write nop sequence of 1 bytes
To work around such llvm-17 CI job failures, conditionally define
__arena_global variables as 64-bit if __clang_major__ < 18, to make sure
.addr_space.1 has no holes. Ideally we should avoid compiling this file
using clang-17 at all (arena tests depend on
__BPF_FEATURE_ADDR_SPACE_CAST, and are skipped for llvm-17 anyway), but
that is a separate topic.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Peilin Ye <yepeilin@google.com>
Link: https://lore.kernel.org/r/1b46c6feaf0f1b6984d9ec80e500cc7383e9da1a.1741049567.git.yepeilin@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement the arch_bpf_timed_may_goto function using inline assembly to
have control over which registers are spilled, and use our special
protocol of using BPF_REG_AX as an argument into the function, and as
the return value when going back.
Emit call depth accounting for the call made from this stub, and ensure
we don't have naked returns (when rethunk mitigations are enabled) by
falling back to the RET macro (instead of retq). After popping all saved
registers, the return address into the BPF program should be on top of
the stack.
Since the JIT support is now enabled, ensure selftests which are
checking the produced may_goto sequences do not break by adjusting them.
Make sure we still test the old may_goto sequence on other
architectures, while testing the new sequence on x86_64.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250304003239.2390751-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All tests from test_tunnel.sh have been migrated into test test_progs.
The last test remaining in the script is the test_ipip() that is already
covered in the test_prog framework by the NONE case of test_ipip_tunnel().
Remove the test_tunnel.sh script and its Makefile entry
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-10-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6tnl tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test ip6tnl tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ipip6() and test_ip6ip6() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-9-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6geneve tunnels are tested in the test_tunnel.sh but not in the
test_progs framework.
Add a new test in test_progs to test ip6geneve tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ip6geneve() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-8-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
geneve tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test geneve tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_geneve() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-7-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6erspan tunnels are tested in the test_tunnel.sh but not in the
test_progs framework.
Add a new test in test_progs to test ip6erspan tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_ip6erspan() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-6-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
erspan tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test erspan tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_erspan() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-5-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
ip6gre tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test ip6gre tunnels. It uses the same
network topology and the same BPF programs than the script. Disable the
IPv6 DAD feature because it can take lot of time and cause some tests to
fail depending on the environment they're run on.
Remove test_ip6gre() and test_ip6gretap() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-4-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
gre tunnels are tested in the test_tunnel.sh but not in the test_progs
framework.
Add a new test in test_progs to test gre tunnels. It uses the same
network topology and the same BPF programs than the script.
Remove test_gre() and test_gre_no_tunnel_key() from the script.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-3-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
All tests use more or less the same ping commands as final validation.
Also test_ping()'s return value is checked with ASSERT_OK() while this
check is already done by the SYS() macro inside test_ping().
Create helpers around test_ping() and use them in the tests to avoid code
duplication.
Remove the unnecessary ASSERT_OK() from the tests.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-2-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A fair amount of code duplication is present among tests to attach BPF
programs.
Create generic_attach* helpers that attach BPF programs to a given
interface.
Use ASSERT_OK_FD() instead of ASSERT_GE() to check fd's validity.
Use these helpers in all the available tests.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250303-tunnels-v2-1-8329f38f0678@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order not to pollute CSV output, e.g.:
$ ./veristat -o csv exceptions_ext.bpf.o > test.csv
Using guessed program type 'sched_cls' for exceptions_ext.bpf.o/extension...
Using guessed program type 'sched_cls' for exceptions_ext.bpf.o/throwing_extension...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-4-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Before:
./veristat -G @foobar iters.bpf.o
Failed to open presets in 'foobar': Unknown error -2
...
After:
./veristat -G @foobar iters.bpf.o
Failed to open presets in 'foobar': No such file or directory
...
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow reading object file list from file.
E.g. the following command:
./veristat @list.txt
Is equivalent to the following invocation:
./veristat line-1 line-2 ... line-N
Where line-i corresponds to lines from list.txt.
Lines starting with '#' are ignored.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Mykyta Yatsenko <mykyta.yatsenko5@gmail.com>
Link: https://lore.kernel.org/bpf/20250301000147.1583999-2-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests for freplace behavior with the combination of sleepable
and non-sleepable global subprogs. The changes_pkt_data selftest
did all the hardwork, so simply rename it and include new support
for more summarization tests for might_sleep bit.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-4-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests for rejecting sleepable and accepting non-sleepable global
function calls in atomic contexts. For spin locks, we still reject
all global function calls. Once resilient spin locks land, we will
carefully lift in cases where we deem it safe.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20250301151846.1552362-3-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_select_reuseport_kern.c is currently including <stdlib.h>, but it
does not use any definition from there.
Remove stdlib.h inclusion from test_select_reuseport_kern.c
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250227-remove_wrong_header-v1-1-bc94eb4e2f73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The CXL unit test cxl-xor-region.sh is skipping a 1+1+1 region
interleave test case because the window is not defined.
Additionally, upcoming expansion of 3 way HB interleave test cases
(like 2+2+2) require the same window.
Replace an unused CFMWS with a 3-way capable CFMWS in the set of
CFMWS's loaded when interleave_arithmetic=1.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Link: https://patch.msgid.link/20250226221931.2352061-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add support to emulate the CXL Set Shutdown State operation.
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://patch.msgid.link/20250220220235.276831-5-dave@stgolabs.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In a nvdimm interleave-set each device with an invalid or zero
serial number may cause pmem region initialization to fail, but in
cxl case such device could still set cookies of nd_interleave_set
and create a nvdimm pmem region.
This adds the validation of serial number in cxl pmem region creation.
The event of no serial number would cause to fail to set the cookie
and pmem region.
For cxl-test to work properly, always +1 on mock device's serial
number.
Signed-off-by: Yuquan Wang <wangyuquan1236@phytium.com.cn>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20250219040029.515451-2-wangyuquan1236@phytium.com.cn
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
When PCIe AER is in FW-First, OS should process CXL Protocol errors from
CPER records. Introduce support for handling and logging CXL Protocol
errors.
The defined trace events cxl_aer_uncorrectable_error and
cxl_aer_correctable_error trace native CXL AER endpoint errors. Reuse them
to trace FW-First Protocol errors.
Since the CXL code is required to be called from process context and
GHES is in interrupt context, use workqueues for processing.
Similar to CXL CPER event handling, use kfifo to handle errors as it
simplifies queue processing by providing lock free fifo operations.
Add the ability for the CXL sub-system to register a workqueue to
process CXL CPER protocol errors.
[DJ: return cxl_cper_register_prot_err_work() directly in cxl_ras_init()]
Signed-off-by: Smita Koralahalli <Smita.KoralahalliChannabasappa@amd.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://patch.msgid.link/20250310223839.31342-2-Smita.KoralahalliChannabasappa@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Convert the scanf() self-test to a KUnit test.
In the interest of keeping the patch reasonably-sized this doesn't
refactor the tests into proper parameterized tests - it's all one big
test case.
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250307-scanf-kunit-convert-v9-3-b98820fa39ff@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
In order to improve readability, use the IRQ_TYPE_* defines from the UAPI
header rather than using raw values.
No functional change.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://lore.kernel.org/r/20250310111016.859445-12-cassel@kernel.org
After the recent merge between net-next and net, I got some conflicts on
my side because the merge resolution was different from Stephen's one
[1] I applied on my side in the MPTCP tree.
It looks like the code that is now in net-next is using the old way to
retrieve the local and remote addresses. This patch is now using the new
way, like what was in Stephen's email [1].
Also, in get_interface_info(), there were no conflicts in this area,
because that was new code from 'net', but a small adaptation was needed
there as well to get the remote address.
Fixes: 941defcea7 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Link: https://lore.kernel.org/20250311115758.17a1d414@canb.auug.org.au [1]
Suggested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250314-net-next-drv-net-ping-fix-merge-v1-1-0d5c19daf707@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
tools/testing/selftests/drivers/net/ping.py
75cc19c8ff ("selftests: drv-net: add xdp cases for ping.py")
de94e86974 ("selftests: drv-net: store addresses in dict indexed by ipver")
https://lore.kernel.org/netdev/20250311115758.17a1d414@canb.auug.org.au/
net/core/devmem.c
a70f891e0f ("net: devmem: do not WARN conditionally after netdev_rx_queue_restart()")
1d22d3060b ("net: drop rtnl_lock for queue_mgmt operations")
https://lore.kernel.org/netdev/20250313114929.43744df1@canb.auug.org.au/
Adjacent changes:
tools/testing/selftests/net/Makefile
6f50175cca ("selftests: Add IPv6 link-local address generation tests for GRE devices.")
2e5584e0f9 ("selftests/net: expand cmsg_ipv6.sh with ipv4")
drivers/net/ethernet/broadcom/bnxt/bnxt.c
661958552e ("eth: bnxt: do not use BNXT_VNIC_NTUPLE unconditionally in queue restart logic")
fe96d717d3 ("bnxt_en: Extend queue stop/start for TX rings")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
No known regressions outstanding.
Current release - regressions:
- wifi: nl80211: fix assoc link handling
- eth: lan78xx: sanitize return values of register read/write functions
Current release - new code bugs:
- ethtool: tsinfo: fix dump command
- bluetooth: btusb: configure altsetting for HCI_USER_CHANNEL
- eth: mlx5: DR, use the right action structs for STEv3
Previous releases - regressions:
- netfilter: nf_tables: make destruction work queue pernet
- gre: fix IPv6 link-local address generation.
- wifi: iwlwifi: fix TSO preparation
- bluetooth: revert "bluetooth: hci_core: fix sleeping function called from invalid context"
- ovs: revert "openvswitch: switch to per-action label counting in conntrack"
- eth: ice: fix switchdev slow-path in LAG
- eth: bonding: fix incorrect MAC address setting to receive NS messages
Previous releases - always broken:
- core: prevent TX of unreadable skbs
- sched: prevent creation of classes with TC_H_ROOT
- netfilter: nft_exthdr: fix offset with ipv4_find_option()
- wifi: cfg80211: cancel wiphy_work before freeing wiphy
- mctp: copy headers if cloned
- phy: nxp-c45-tja11xx: add errata for TJA112XA/B
- eth: bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
- eth: mlx5: bridge, fix the crash caused by LAG state check
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=lIrc
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter, bluetooth and wireless.
No known regressions outstanding.
Current release - regressions:
- wifi: nl80211: fix assoc link handling
- eth: lan78xx: sanitize return values of register read/write
functions
Current release - new code bugs:
- ethtool: tsinfo: fix dump command
- bluetooth: btusb: configure altsetting for HCI_USER_CHANNEL
- eth: mlx5: DR, use the right action structs for STEv3
Previous releases - regressions:
- netfilter: nf_tables: make destruction work queue pernet
- gre: fix IPv6 link-local address generation.
- wifi: iwlwifi: fix TSO preparation
- bluetooth: revert "bluetooth: hci_core: fix sleeping function
called from invalid context"
- ovs: revert "openvswitch: switch to per-action label counting in
conntrack"
- eth:
- ice: fix switchdev slow-path in LAG
- bonding: fix incorrect MAC address setting to receive NS
messages
Previous releases - always broken:
- core: prevent TX of unreadable skbs
- sched: prevent creation of classes with TC_H_ROOT
- netfilter: nft_exthdr: fix offset with ipv4_find_option()
- wifi: cfg80211: cancel wiphy_work before freeing wiphy
- mctp: copy headers if cloned
- phy: nxp-c45-tja11xx: add errata for TJA112XA/B
- eth:
- bnxt: fix kernel panic in the bnxt_get_queue_stats{rx | tx}
- mlx5: bridge, fix the crash caused by LAG state check"
* tag 'net-6.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
net: mana: cleanup mana struct after debugfs_remove()
net/mlx5e: Prevent bridge link show failure for non-eswitch-allowed devices
net/mlx5: Bridge, fix the crash caused by LAG state check
net/mlx5: Lag, Check shared fdb before creating MultiPort E-Switch
net/mlx5: Fix incorrect IRQ pool usage when releasing IRQs
net/mlx5: HWS, Rightsize bwc matcher priority
net/mlx5: DR, use the right action structs for STEv3
Revert "openvswitch: switch to per-action label counting in conntrack"
net: openvswitch: remove misbehaving actions length check
selftests: Add IPv6 link-local address generation tests for GRE devices.
gre: Fix IPv6 link-local address generation.
netfilter: nft_exthdr: fix offset with ipv4_find_option()
selftests/tc-testing: Add a test case for DRR class with TC_H_ROOT
net_sched: Prevent creation of classes with TC_H_ROOT
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
selftests: netfilter: skip br_netfilter queue tests if kernel is tainted
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
wifi: mac80211: fix MPDU length parsing for EHT 5/6 GHz
qlcnic: fix memory leak issues in qlcnic_sriov_common.c
rtase: Fix improper release of ring list entries in rtase_sw_reset
...
Convert the printf() self-test to a KUnit test.
In the interest of keeping the patch reasonably-sized this doesn't
refactor the tests into proper parameterized tests - it's all one big
test case.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20250307-printf-kunit-convert-v6-1-4d85c361c241@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
-----BEGIN PGP SIGNATURE-----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=OTtx
-----END PGP SIGNATURE-----
Merge tag 'nf-25-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains Netfilter/IPVS fixes for net:
1) Missing initialization of cpu and jiffies32 fields in conncount,
from Kohei Enju.
2) Skip several tests in case kernel is tainted, otherwise tests bogusly
report failure too as they also check for tainted kernel,
from Florian Westphal.
3) Fix a hyphothetical integer overflow in do_ip_vs_get_ctl() leading
to bogus error logs, from Dan Carpenter.
4) Fix incorrect offset in ipv4 option match in nft_exthdr, from
Alexey Kashavkin.
netfilter pull request 25-03-13
* tag 'nf-25-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_exthdr: fix offset with ipv4_find_option()
ipvs: prevent integer overflow in do_ip_vs_get_ctl()
selftests: netfilter: skip br_netfilter queue tests if kernel is tainted
netfilter: nf_conncount: Fully initialize struct nf_conncount_tuple in insert_tree()
====================
Link: https://patch.msgid.link/20250313095636.2186-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The exact timer ID allocation mode is used by CRIU to restore timers with a
given ID. Add a test case for it.
It's skipped on older kernels when the prctl() fails.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/8734fl2tkx.ffs@tglx
GRE devices have their special code for IPv6 link-local address
generation that has been the source of several regressions in the past.
Add selftest to check that all gre, ip6gre, gretap and ip6gretap get an
IPv6 link-link local address in accordance with the
net.ipv6.conf.<dev>.addr_gen_mode sysctl.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/2d6772af8e1da9016b2180ec3f8d9ee99f470c77.1741375285.git.gnault@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 51bef03e1a ("selftests/net: deflake GRO tests") recently
switched to NAPI suspension, and lowered the timeout from 1ms to 100us.
This started causing flakes in netdev-run CI. Let's bump it to 200us.
In a quick test of a debug kernel I see failures with 100us, with 200us
in 5 runs I see 2 completely clean runs and 3 with a single retry
(GRO test will retry up to 5 times).
Reviewed-by: Kevin Krakauer <krakauer@google.com>
Link: https://patch.msgid.link/20250310110821.385621-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate the reproduer from Mingi to TDC.
All test results:
1..4
ok 1 0385 - Create DRR with default setting
ok 2 2375 - Delete DRR with handle
ok 3 3092 - Show DRR class
ok 4 4009 - Reject creation of DRR class with classid TC_H_ROOT
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306232355.93864-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These scripts fail if the kernel is tainted which leads to wrong test
failure reports in CI environments when an unrelated test triggers some
splat.
Check taint state at start of script and SKIP if its already dodgy.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Adding the aligned(1024) attribute to the definition of __rseq_abi did
not increase its size to 1024, for this attribute to impact the size of
__rseq_abi it would need to be added to the declaration of 'struct
rseq_abi'. We only want to increase the size of the TLS allocation to
ensure registration will succeed with future extended ABI. Use a union
with a dummy member to ensure we allocate 1024 bytes.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/r/20250311192222.323453-1-mjeanson@efficios.com
Build break was reported in the powerpc mailing list for next-20250218 with below errors
make[1]: Nothing to be done for 'all'.
BUILD_TARGET=/root/venkat/linux-next/tools/testing/selftests/powerpc/mm; mkdir -p $BUILD_TARGET; make OUTPUT=$BUILD_TARGET -k -C mm all
CC pkey_exec_prot
In file included from pkey_exec_prot.c:18:
/root/venkat/linux-next/tools/testing/selftests/powerpc/include/pkeys.h: In function ‘pkeys_unsupported’:
/root/venkat/linux-next/tools/testing/selftests/powerpc/include/pkeys.h:96:34: error: ‘PKEY_UNRESTRICTED’ undeclared (first use in this function)
96 | pkey = sys_pkey_alloc(0, PKEY_UNRESTRICTED);
| ^~~~~~~~~~~~~~~~~
https://lore.kernel.org/all/20250113170619.484698-2-yury.khrustalev@arm.com/ patchset
has been queued to arm64/for-next/pkey_unrestricted which is causing a build break
in the selftest/powerpc builds.
Commit 6d61527d93 ("mm/pkey: Add PKEY_UNRESTRICTED macro") added a macro
PKEY_UNRESTRICTED to handle implicit literal value of 0x0 (which is "unrestricted").
Add the same to selftest/powerpc/pkeys.h to fix the reported build break.
Fixes: 00894c3fc9 ("selftests/powerpc: Use PKEY_UNRESTRICTED macro")
Reported-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Closes: https://lore.kernel.org/lkml/3267ea6e-5a1a-4752-96ef-8351c912d386@linux.ibm.com/T/
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/20250311084129.39308-1-maddy@linux.ibm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The correct mac address for NS target 2001:db8::254 is 33:33:ff:00:02:54,
not 33:33:00:00:02:54. The same with client maddress.
Fixes: 86fb6173d1 ("selftests: bonding: add ns multicast group testing")
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250306023923.38777-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add UBLK_TEST_QUIET, so we can print test result(PASS/SKIP/FAIL) only.
Also always run from test script's current directory, then the same test
script can be started from other work directory.
This way helps a lot to reuse this test source code and scripts for
other projects(liburing, blktests, ...)
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-12-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add stress_test_01 for running IO vs. killing ublk server, so io_uring exit &
cancel code path can be covered, same with ublk's cancel code path.
Especially IO buffer lifetime is one big thing for ublk zero copy, the added
test can verify if this area works as expected.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-11-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add stress_test_01 for running IO vs. removing device for verifying that
ublk device removal can work as expected when heavy IO workloads are in
progress.
null, loop and loop/zc are covered in this tests.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-10-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Load ublk_drv module in _prep_test(), and unload it in _cleanup_test(),
so that test can always be done in consistent state.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-9-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Move zero copy feature check into _add_ublk_dev() since we will have
more tests which requires to cover zero copy.
Then one check function of _check_add_dev() has to be added for dealing
with cleanup since '_add_ublk_dev()' is run in sub-shell, and we can't
exit from it to terminal shell.
Meantime always return error code from _add_ublk_dev().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-8-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
More devices can be created in single tests, so simply remove all
ublk devices in _cleanup_test(), meantime remove the ${dev_id} argument
of _cleanup_test().
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250303124324.3563605-7-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The argument of '-a' doesn't follow any value, so fix it by putting it
with '-z' together.
Fixes: bedc9cbc5f ("selftests: ublk: add ublk zero copy test")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250303124324.3563605-5-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ping.py has 3 cases, test_v4, test_v6 and test_tcp.
But these cases are not executed on the XDP environment.
So, it adds XDP environment, existing tests(test_v4, test_v6, and
test_tcp) are executed too on the below XDP environment.
So, it adds XDP cases.
1. xdp-generic + single-buffer
2. xdp-generic + multi-buffer
3. xdp-native + single-buffer
4. xdp-native + multi-buffer
5. xdp-offload
It also makes test_{v4 | v6 | tcp} sending large size packets. this may
help to check whether multi-buffer is working or not.
Note that the physical interface may be down and then up when xdp is
attached or detached.
This takes some period to activate traffic. So sleep(10) is
added if the test interface is the physical interface.
netdevsim and veth type interfaces skip sleep.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250309134219.91670-9-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UDP send with MSG_MORE takes a slightly different path than the
lockless fast path.
For completeness, add coverage to this case too.
Pass MSG_MORE on the initial sendmsg, then follow up with a zero byte
write to unplug the cork.
Unrelated: also add two missing endlines in usage().
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250307033620.411611-4-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmfOKBUeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1aQH/iC+Oyij4VxAjBek
BOXIT/p6CwlIXb8ObiWWcRjDPizlcxb3RaV8J2RO+IqaQ2wltxpFANq2G7Re2FPm
SNcEpIURAOVcxHGedcfFA91srO5F4FzNTO8LVp7MIbcgMYy3pdk+dbZmi6A691R+
t9pb74m+MAnF1o/MUx7pUlhAT/4ymuuR0F7WCSg4h0Xwe5m0nlJY89kJBC7PCjyd
n3mdhsz3rDSLmt/z/T7HGD89r8sYSvm9cOKtL3ELgGTrm7boQV8ii9Y9w04DI8PQ
JmIernugcCxmhH36mVUAHgJf2+/T388xFUh/D5+skeUOUZpaJZG866rnb32WpsHc
eWLFUeg=
=Wypt
-----END PGP SIGNATURE-----
Merge 6.14-rc6 into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following build failure:
ublk//file_backed.c: In function ‘backing_file_tgt_init’:
ublk//file_backed.c:28:42: error: ‘O_DIRECT’ undeclared (first use in this function); did you mean ‘O_DIRECTORY’?
28 | fd = open(file, O_RDWR | O_DIRECT);
| ^~~~~~~~
| O_DIRECTORY
when trying to reuse this same utility for liburing test.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250303124324.3563605-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Improve ublk_stop_io_daemon() in the following ways:
- don't wait if ->ublksrv_pid becomes -1, which means that the disk
has been stopped
- don't wait if ublk char device doesn't exist any more, so we can
avoid to rely on inoitfy for wait until the char device is closed
And this way may reduce time of delete command a lot.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20250303124324.3563605-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode.
x86:
* Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
* Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
* Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
* Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
* Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
* Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
* Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmfNSeUUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNKngf/cLgQAT9AF4nFqcwh5b5uucKHVJ8W
uTiGlWqLAf2UN53L63eZ/7vKQWGQYkOTFvormR14Jam6IYtytsZw1xLBH4fGtUyB
qVjk0EPzaKGqn3LrgyneQNCXdyxJv7EBVBgoOKH0pvOksoW2E5ZizhhtRFtL7nCE
Yk8FQKpP0mIBk04RMsvzJVEFKIb4OZgJadWo0gryg1oF2aAv7mxQjyqUWsBDsb3q
99c0ElSBfV39FeT8xeok4k7S5jbBWii2KiaH72ZsNiBu0rYmEuLwIoygCNNWL9Wu
FPdQ+r//YrzfCJSXwGPfdUaRaF4p2642S6oiXQuusNNUmhK6/MRo3mZo8A==
=XQHm
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"arm64:
- Fix a couple of bugs affecting pKVM's PSCI relay implementation
when running in the hVHE mode, resulting in the host being entered
with the MMU in an unknown state, and EL2 being in the wrong mode
x86:
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow
- Ensure DEBUGCTL is context switched on AMD to avoid running the
guest with the host's value, which can lead to unexpected bus lock
#DBs
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't
properly emulate BTF. KVM's lack of context switching has meant BTF
has always been broken to some extent
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as
the guest can enable DebugSwap without KVM's knowledge
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes
to RO memory" phase without actually generating a write-protection
fault
- Fix a printf() goof in the SEV smoke test that causes build
failures with -Werror
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when
PERFMON_V2 isn't supported by KVM"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Explicitly zero EAX and EBX when PERFMON_V2 isn't supported by KVM
KVM: selftests: Fix printf() format goof in SEV smoke test
KVM: selftests: Ensure all vCPUs hit -EFAULT during initial RO stage
KVM: SVM: Don't rely on DebugSwap to restore host DR0..DR3
KVM: SVM: Save host DR masks on CPUs with DebugSwap
KVM: arm64: Initialize SCTLR_EL1 in __kvm_hyp_init_cpu()
KVM: arm64: Initialize HCR_EL2.E2H early
KVM: x86: Snapshot the host's DEBUGCTL after disabling IRQs
KVM: SVM: Manually context switch DEBUGCTL if LBR virtualization is disabled
KVM: x86: Snapshot the host's DEBUGCTL in common x86
KVM: SVM: Suppress DEBUGCTL.BTF on AMD
KVM: SVM: Drop DEBUGCTL[5:2] from guest's effective value
KVM: selftests: Assert that STI blocking isn't set after event injection
KVM: SVM: Set RFLAGS.IF=1 in C code, to get VMRUN out of the STI shadow
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
-----BEGIN PGP SIGNATURE-----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=as6u
-----END PGP SIGNATURE-----
Merge tag 'kvm-x86-fixes-6.14-rcN.2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.14-rcN #2
- Set RFLAGS.IF in C code on SVM to get VMRUN out of the STI shadow.
- Ensure DEBUGCTL is context switched on AMD to avoid running the guest with
the host's value, which can lead to unexpected bus lock #DBs.
- Suppress DEBUGCTL.BTF on AMD (to match Intel), as KVM doesn't properly
emulate BTF. KVM's lack of context switching has meant BTF has always been
broken to some extent.
- Always save DR masks for SNP vCPUs if DebugSwap is *supported*, as the guest
can enable DebugSwap without KVM's knowledge.
- Fix a bug in mmu_stress_tests where a vCPU could finish the "writes to RO
memory" phase without actually generating a write-protection fault.
- Fix a printf() goof in the SEV smoke test that causes build failures with
-Werror.
- Explicitly zero EAX and EBX in CPUID.0x8000_0022 output when PERFMON_V2
isn't supported by KVM.
or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ8zgnAAKCRDdBJ7gKXxA
jmTzAP9LsTIpkPkRXDpwxPR/Si5KPwOkE6sGj4ETEqbX3vUvcAEA/Lp7oafc7Vqr
XxlC1VFush1ZK29Tecxzvnapl2/VSAs=
=zBvY
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"33 hotfixes. 24 are cc:stable and the remainder address post-6.13
issues or aren't considered necessary for -stable kernels.
26 are for MM and 7 are for non-MM.
- "mm: memory_failure: unmap poisoned folio during migrate properly"
from Ma Wupeng fixes a couple of two year old bugs involving the
migration of hwpoisoned folios.
- "selftests/damon: three fixes for false results" from SeongJae Park
fixes three one year old bugs in the SAMON selftest code.
The remainder are singletons and doubletons. Please see the individual
changelogs for details"
* tag 'mm-hotfixes-stable-2025-03-08-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (33 commits)
mm/page_alloc: fix uninitialized variable
rapidio: add check for rio_add_net() in rio_scan_alloc_net()
rapidio: fix an API misues when rio_add_net() fails
MAINTAINERS: .mailmap: update Sumit Garg's email address
Revert "mm/page_alloc.c: don't show protection in zone's ->lowmem_reserve[] for empty zone"
mm: fix finish_fault() handling for large folios
mm: don't skip arch_sync_kernel_mappings() in error paths
mm: shmem: remove unnecessary warning in shmem_writepage()
userfaultfd: fix PTE unmapping stack-allocated PTE copies
userfaultfd: do not block on locking a large folio with raised refcount
mm: zswap: use ATOMIC_LONG_INIT to initialize zswap_stored_pages
mm: shmem: fix potential data corruption during shmem swapin
mm: fix kernel BUG when userfaultfd_move encounters swapcache
selftests/damon/damon_nr_regions: sort collected regiosn before checking with min/max boundaries
selftests/damon/damon_nr_regions: set ops update for merge results check to 100ms
selftests/damon/damos_quota: make real expectation of quota exceeds
include/linux/log2.h: mark is_power_of_2() with __always_inline
NFS: fix nfs_release_folio() to not deadlock via kcompactd writeback
mm, swap: avoid BUG_ON in relocate_cluster()
mm: swap: use correct step in loop to wait all clusters in wait_for_allocation()
...
Add GET_IRQTYPE API checks to each interrupt test.
While at it, change pci_ep_ioctl() to get the appropriate return
value from ioctl().
Suggested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20250225110252.28866-2-hayashi.kunihiko@socionext.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Currently BARs that have been disabled by the endpoint controller driver
will result in a test FAIL.
Returning FAIL for a BAR that is disabled seems overly pessimistic.
There are EPC that disables one or more BARs intentionally.
One reason for this is that there are certain EPCs that are hardwired to
expose internal PCIe controller registers over a certain BAR, so the EPC
driver disables such a BAR, such that the host will not overwrite random
registers during testing.
Such a BAR will be disabled by the EPC driver's init function, and the
BAR will be marked as BAR_RESERVED, such that it will be unavailable to
endpoint function drivers.
Let's return FAIL only for BARs that are actually enabled and failed the
test, and let's return skip for BARs that are not even enabled.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250123120147.3603409-4-cassel@kernel.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZ8qHFwAKCRAraS+Z+3y5
E6QRAQCI/irYxpT6nBgT3ejyO6CIHjbHjdNP5KRkE8JT61zmJgD8Diet4dwwOxLK
c1Pq5Jnl9KLpEPG99TcjtH3c++N3fww=
=ltml
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-03-06
We've added 6 non-merge commits during the last 13 day(s) which contain
a total of 6 files changed, 230 insertions(+), 56 deletions(-).
The main changes are:
1) Add XDP metadata support for tun driver, from Marcus Wichelmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Fix file descriptor assertion in open_tuntap helper
selftests/bpf: Add test for XDP metadata support in tun driver
selftests/bpf: Refactor xdp_context_functional test and bpf program
selftests/bpf: Move open_tuntap to network helpers
net: tun: Enable transfer of XDP metadata to skb
net: tun: Enable XDP metadata support
====================
Link: https://patch.msgid.link/20250307055335.441298-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390 by
introducing a dedicated GNU hash bucket pointer with correct 32-bit
entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmfLedEACgkQjYWKoQLX
FBhXMQf/bIaJEOV/Ww5PWY+AqtHPpQjhP2cvOfSRoh2py38Gp1sy/6ddpn8lcl3R
skyeW4XHLpARYGg6NNOAOgFr43c7wQYrr+7uSW0zska+hOlSOi5TtycEOgu7o+VE
Nig5XRuBPc01CBokFc+gbvMTjp2fTVlzTQ2/F/B7py62j2c21Y2/n7yZ4hhfQolM
oiWlRDXzCRHM/sfa3FlML6sSgfIcHhhMSZLpdmRDhir9vBm1VpeGHa+FM5V8Pzsk
KsiuoH7+ylbw+swVn2V/p3fqfS7JoopYdng8h40eLRkeHaTi052+NmMwv8gYAnCk
BxfC1re5KlZ6kgWh0CDLUoYQHdwHxw==
=KCjH
-----END PGP SIGNATURE-----
Merge tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix return address recovery of traced function in ftrace to ensure
reliable stack unwinding
- Fix compiler warnings and runtime crashes of vDSO selftests on s390
by introducing a dedicated GNU hash bucket pointer with correct
32-bit entry size
- Fix test_monitor_call() inline asm, which misses CC clobber, by
switching to an instruction that doesn't modify CC
* tag 's390-6.14-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/ftrace: Fix return address recovery of traced function
selftests/vDSO: Fix GNU hash table entry size for s390x
s390/traps: Fix test_monitor_call() inline assembly
WiFi removed one of their subsys entries from drop reasons, in
commit 286e696770 ("wifi: mac80211: Drop cooked monitor support")
SKB_DROP_REASON_SUBSYS_OPENVSWITCH is now 2 not 3.
The drop reasons are not uAPI, read the correct value
from debug info.
We need to enable vmlinux BTF, otherwise pahole needs
a few GB of memory to decode the enum name.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Aaron Conole <aconole@redhat.com>
Link: https://patch.msgid.link/20250304180615.945945-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After installing pahole on the CI image we have a new map created
by libbpf. Ignore it otherwise we see:
Exception: Time out waiting for map counts to stabilize want 2, have 3
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250304233204.1139251-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We hit a following exception on timeout, nmaps is never set:
Test bpftool bound info reporting (own ns)...
Traceback (most recent call last):
File "/home/virtme/testing-1/tools/testing/selftests/net/./bpf_offload.py", line 1128, in <module>
check_dev_info(False, "")
File "/home/virtme/testing-1/tools/testing/selftests/net/./bpf_offload.py", line 583, in check_dev_info
maps = bpftool_map_list_wait(expected=2, ns=ns)
File "/home/virtme/testing-1/tools/testing/selftests/net/./bpf_offload.py", line 215, in bpftool_map_list_wait
raise Exception("Time out waiting for map counts to stabilize want %d, have %d" % (expected, nmaps))
NameError: name 'nmaps' is not defined
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250304233204.1139251-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
openat is useful to avoid needing to construct relative paths, so expose
a wrapper for using it directly.
Signed-off-by: Louis Taylor <louis@kragniz.eu>
Link: https://lore.kernel.org/r/20250306184147.208723-1-louis@kragniz.eu
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Cross-merge networking fixes after downstream PR (net-6.14-rc6).
Conflicts:
net/ethtool/cabletest.c
2bcf4772e4 ("net: ethtool: try to protect all callback with netdev instance lock")
637399bf7e ("net: ethtool: netlink: Allow NULL nlattrs when getting a phy_device")
No Adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The open_tuntap helper function uses open() to get a file descriptor for
/dev/net/tun.
The open(2) manpage writes this about its return value:
On success, open(), openat(), and creat() return the new file
descriptor (a nonnegative integer). On error, -1 is returned and
errno is set to indicate the error.
This means that the fd > 0 assertion in the open_tuntap helper is
incorrect and should rather check for fd >= 0.
When running the BPF selftests locally, this incorrect assertion was not
an issue, but the BPF kernel-patches CI failed because of this:
open_tuntap:FAIL:open(/dev/net/tun) unexpected open(/dev/net/tun):
actual 0 <= expected 0
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250305213438.3863922-7-marcus.wichelmann@hetzner-cloud.de
Add a selftest that creates a tap device, attaches XDP and TC programs,
writes a packet with a test payload into the tap device and checks the
test result. This test ensures that the XDP metadata support in the tun
driver is enabled and that the metadata size is correctly passed to the
skb.
See the previous commit ("selftests/bpf: refactor xdp_context_functional
test and bpf program") for details about the test design.
The test runs in its own network namespace. This provides some extra
safety against conflicting interface names.
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305213438.3863922-6-marcus.wichelmann@hetzner-cloud.de
The existing XDP metadata test works by creating a veth pair and
attaching XDP & TC programs that drop the packet when the condition of
the test isn't fulfilled. The test then pings through the veth pair and
succeeds when the ping comes through.
While this test works great for a veth pair, it is hard to replicate for
tap devices to test the XDP metadata support of them. A similar test for
the tun driver would either involve logic to reply to the ping request,
or would have to capture the packet to check if it was dropped or not.
To make the testing of other drivers easier while still maximizing code
reuse, this commit refactors the existing xdp_context_functional test to
use a test_result map. Instead of conditionally passing or dropping the
packet, the TC program is changed to copy the received metadata into the
value of that single-entry array map. Tests can then verify that the map
value matches the expectation.
This testing logic is easy to adapt to other network drivers as the only
remaining requirement is that there is some way to send a custom
Ethernet packet through it that triggers the XDP & TC programs.
The Ethernet header of that custom packet is all-zero, because it is not
required to be valid for the test to work. The zero ethertype also helps
to filter out packets that are not related to the test and would
otherwise interfere with it.
The payload of the Ethernet packet is used as the test data that is
expected to be passed as metadata from the XDP to the TC program and
written to the map. It has a fixed size of 32 bytes which is a
reasonable size that should be supported by both drivers. Additional
packet headers are not necessary for the test and were therefore skipped
to keep the testing code short.
This new testing methodology no longer requires the veth interfaces to
have IP addresses assigned, therefore these were removed.
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250305213438.3863922-5-marcus.wichelmann@hetzner-cloud.de
To test the XDP metadata functionality of the tun driver, it's necessary
to create a new tap device first. A helper function for this already
exists in lwt_helpers.h. Move it to the common network helpers header,
so it can be reused in other tests.
Signed-off-by: Marcus Wichelmann <marcus.wichelmann@hetzner-cloud.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250305213438.3863922-4-marcus.wichelmann@hetzner-cloud.de
damon_nr_regions.py starts DAMON, periodically collect number of regions
in snapshots, and see if it is in the requested range. The check code
assumes the numbers are sorted on the collection list, but there is no
such guarantee. Hence this can result in false positive test success.
Sort the list before doing the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-4-sj@kernel.org
Fixes: 781497347d ("selftests/damon: implement test for min/max_nr_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damon_nr_regions.py updates max_nr_regions to a number smaller than
expected number of real regions and confirms DAMON respect the harsh
limit. To give time for DAMON to make changes for the regions, 3
aggregation intervals (300 milliseconds) are given.
The internal mechanism works with not only the max_nr_regions, but also
sz_limit, though. It avoids merging region if that casn make region of
size larger than sz_limit. In the test, sz_limit is set too small to
achive the new max_nr_regions, unless it is updated for the new
min_nr_regions. But the update is done only once per operations set
update interval, which is one second by default.
Hence, the test randomly incurs false positive failures. Fix it by
setting the ops interval same to aggregation interval, to make sure
sz_limit is updated by the time of the check.
Link: https://lkml.kernel.org/r/20250225222333.505646-3-sj@kernel.org
Fixes: 8bf890c816 ("selftests/damon/damon_nr_regions: test online-tuned max_nr_regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: three fixes for false results".
Fix three DAMON selftest bugs that cause two and one false positive
failures and successes.
This patch (of 3):
damos_quota.py assumes the quota will always exceeded. But whether quota
will be exceeded or not depend on the monitoring results. Actually the
monitored workload has chaning access pattern and hence sometimes the
quota may not really be exceeded. As a result, false positive test
failures happen. Expect how much time the quota will be exceeded by
checking the monitoring results, and use it instead of the naive
assumption.
Link: https://lkml.kernel.org/r/20250225222333.505646-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20250225222333.505646-2-sj@kernel.org
Fixes: 51f58c9da1 ("selftests/damon: add a test for DAMOS quota")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
damos_quota_goal.py selftest see if DAMOS quota goals tuning feature
increases or reduces the effective size quota for given score as expected.
The tuning feature sets the minimum quota size as one byte, so if the
effective size quota is already one, we cannot expect it further be
reduced. However the test is not aware of the edge case, and fails since
it shown no expected change of the effective quota. Handle the case by
updating the failure logic for no change to see if it was the case, and
simply skips to next test input.
Link: https://lkml.kernel.org/r/20250217182304.45215-1-sj@kernel.org
Fixes: f1c07c0a16 ("selftests/damon: add a test for DAMOS quota goal")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502171423.b28a918d-lkp@intel.com
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org> [6.10.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This reverts commit a5c6bc5900.
The general approach described in commit e076eaca59 ("selftests: break
the dependency upon local header files") was taken one step too far here:
it should not have been extended to include the syscall numbers. This is
because doing so would require per-arch support in tools/include/uapi, and
no such support exists.
This revert fixes two separate reports of test failures, from Dave
Hansen[1], and Li Wang[2]. An excerpt of Dave's report:
Before this commit (a5c6bc5900) things are
fine. But after, I get:
running PKEY tests for unsupported CPU/OS
An excerpt of Li's report:
I just found that mlock2_() return a wrong value in mlock2-test
[1] https://lore.kernel.org/dc585017-6740-4cab-a536-b12b37a7582d@intel.com
[2] https://lore.kernel.org/CAEemH2eW=UMu9+turT2jRie7+6ewUazXmA6kL+VBo3cGDGU6RA@mail.gmail.com
Link: https://lkml.kernel.org/r/20250214033850.235171-1-jhubbard@nvidia.com
Fixes: a5c6bc5900 ("selftests/mm: remove local __NR_* definitions")
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Li Wang <liwang@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: Andrei Vagin <avagin@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Muhammad Usama Anjum <usama.anjum@collabora.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rich Felker <dalias@libc.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
It is helpful to vary the number of the LCOFI interrupts generated
by the overflow test. Allow additional argument for overflow test
to accommodate that. It can be easily cross-validated with
/proc/interrupts output in the host.
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-4-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
The PMU test commandline option takes an argument to disable a
certain test. The initial assumption behind this was a common use case
is just to run all the test most of the time. However, running a single
test seems more useful instead. Especially, the overflow test has been
helpful to validate PMU virtualizaiton interrupt changes.
Switching the command line option to run a single test instead
of disabling a single test also allows to provide additional
test specific arguments to the test. The default without any options
remains unchanged which continues to run all the tests.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-3-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
There is no need to start the counter in the overflow handler as we
intend to trigger precise number of LCOFI interrupts through these
tests. The overflow irq handler has already stopped the counter. As
a result, the stop call from the test function may return already
stopped error which is fine as well.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Link: https://lore.kernel.org/r/20250303-kvm_pmu_improve-v2-2-41d177e45929@rivosinc.com
Signed-off-by: Anup Patel <anup@brainfault.org>
While the kselftest was added at the same time with the kernel support
for MTE on hugetlb mappings, the tests may be run on older kernels. Skip
the tests if PROT_MTE is not supported on MAP_HUGETLB mappings.
Fixes: 27879e8cb6 ("selftests: arm64: add hugetlb mte tests")
Cc: Yang Shi <yang@os.amperecomputing.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250221093331.2184245-3-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The architecture doesn't define precise/imprecise MTE tag check modes,
only synchronous and asynchronous. Use the correct naming and also
ensure they match the MTE_{ASYNC,SYNC}_ERR type.
Fixes: 27879e8cb6 ("selftests: arm64: add hugetlb mte tests")
Cc: Yang Shi <yang@os.amperecomputing.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20250221093331.2184245-2-catalin.marinas@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
PTP Hardware Clocks no longer require WRITE permission to perform
readonly operations, such as listing device capabilities or listening to
EXTTS events once they have been enabled by a process with WRITE
permissions.
Add '-r' option to testptp to open the PHC in readonly mode instead of
the default read-write mode. Skip enabling EXTTS if readonly mode is
requested.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit tests lazy preemption by causing the TREE07 rcutorture
scenario to build its kernel with CONFIG_PREEMPT_LAZY=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit tests lazy preemption by causing the TREE10 rcutorture
scenario to build its kernel with CONFIG_PREEMPT_LAZY=y.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Add extra parameters for rcutorture module. One is the "nfakewriters"
which is set -1. There will be created number of test-kthreads which
correspond to number of CPUs in a test system. Those threads randomly
invoke synchronize_rcu() call.
Apart of that "rcu_normal" is set to 1, because it is specifically for
a normal synchronize_rcu() testing, also a newly added parameter which
is "rcu_normal_wake_from_gp" is set to 1 also. That prevents interaction
with other callbacks in a system.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Link: https://lore.kernel.org/r/20250227131613.52683-2-urezki@gmail.com
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Commit 29b036be1b ("selftests: drv-net: test XDP, HDS auto and
the ioctl path") added a new test case in the net tree, now that
this code has made its way to net-next convert it to use the env.rpath()
helper instead of manually computing the relative path.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250228212956.25399-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch introduces a new 'chk_diag' test in diag.sh. It retrieves
the token for a specified MPTCP socket (msk) using the 'ss' command and
then accesses the 'mptcp_diag_dump_one' in kernel via ./mptcp_diag
to verify if the correct token is returned.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/524
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250228-net-next-mptcp-coverage-small-opti-v1-2-f933c4275676@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch enables the retrieval of the mptcp_info structure corresponding
to a specified MPTCP socket (msk). When multiple MPTCP connections are
present, specific information can be obtained for a given connection
through the 'mptcp_diag_dump_one' by using the 'token' associated with
the msk.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250228-net-next-mptcp-coverage-small-opti-v1-1-f933c4275676@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test shell script "set_pcie_speed.sh" is not installed in INSTALL_PATH.
Attempting to execute set_pcie_cooling_state.sh shows warning:
./set_pcie_cooling_state.sh: line 119: ./set_pcie_speed.sh: No such file or directory
Add "set_pcie_speed.sh" to TEST_PROGS.
Link: https://lore.kernel.org/r/Z8FfK8rN30lKzvVV@ly-workstation
Fixes: 838f12c3d5 ("selftests/pcie_bwctrl: Create selftests")
Signed-off-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Commit 14be4e6f35 ("selftests: vDSO: fix ELF hash table entry size for s390x")
changed the type of the ELF hash table entries to 64bit on s390x.
However the *GNU* hash tables entries are always 32bit.
The "bucket" pointer is shared between both hash algorithms.
On s390, this caused the GNU hash algorithm to access its 32-bit entries as if they
were 64-bit, triggering compiler warnings (assignment between "Elf64_Xword *" and
"Elf64_Word *") and runtime crashes.
Introduce a new dedicated "gnu_bucket" pointer which is used by the GNU hash.
Fixes: e0746bde6f ("selftests/vDSO: support DT_GNU_HASH")
Reviewed-by: Jens Remus <jremus@linux.ibm.com>
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250217-selftests-vdso-s390-gnu-hash-v2-1-f6c2532ffe2a@linutronix.de
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When building this test, a binary file 'poll' is
generated and should be gitignore'd.
Link: https://lore.kernel.org/r/20250210160138.4745-1-bharadwaj.raju777@gmail.com
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <shuah@kernel.org>
Add test coverage for the netconsole task name feature to the existing
sysdata selftest script. This extends the test infrastructure to verify
that task names are correctly appended when enabled and absent when
disabled.
The test validates that:
- Task names appear in the expected format "taskname=<name>"
- Task names are included when the feature is enabled
- Task names are excluded when the feature is disabled
- The feature works correctly alongside other sysdata fields like CPU
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allocating a domain with a fault ID indicates that the domain is faultable.
However, there is a gap for the nested parent domain to support PRI. Some
hardware lacks the capability to distinguish whether PRI occurs at stage 1
or stage 2. This limitation may require software-based page table walking
to resolve. Since no in-tree IOMMU driver currently supports this
functionality, it is disallowed. For more details, refer to the related
discussion at [1].
[1] https://lore.kernel.org/linux-iommu/bd1655c6-8b2f-4cfa-adb1-badc00d01811@intel.com/
Link: https://patch.msgid.link/r/20250226104012.82079-1-yi.l.liu@intel.com
Suggested-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The name 'netns_local' is confusing. A following commit will export it via
netlink, so let's use a more explicit name.
Reported-by: Eric Dumazet <edumazet@google.com>
Suggested-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add some test for /proc/net/pktgen/... interface.
- enable 'CONFIG_NET_PKTGEN=m' in tools/testing/selftests/net/config
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The Python lib based tests report that they are producing
"KTAP version 1", but really we aren't making use of any
KTAP features, like subtests. Our output is plain TAP.
Report TAP 13 instead of KTAP 1, this is what mptcp tests do,
and what NIPA knows how to parse best. For HW testing we need
precise subtest result tracking.
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250228180007.83325-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vdso_standalone_test_x86 provides its own ASM syscall wrappers and
_start() implementation. The in-tree nolibc library already provides
this functionality for multiple architectures. By making use of nolibc,
the standalone testcase can be built from the exact same codebase as the
non-standalone version.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-16-28e14e031ed8@linutronix.de
nolibc does not provide sys/time.h and sys/auxv.h,
instead their definitions are available unconditionally.
Guard the includes so they are not attempted on nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-15-28e14e031ed8@linutronix.de
According to limits.h(2) ULONG_MAX is only guaranteed to expand to an
expression, not a symbolic constant which can be evaluated by the
preprocessor.
Specifically the definition of ULONG_MAX from nolibc can not be evaluated
by the preprocessor. To provide compatibility with nolibc, check with
__SIZEOF_LONG__ instead, with is provided directly by the preprocessor
and therefore always a symbolic constant.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-13-28e14e031ed8@linutronix.de
To allow the usage of parse_vdso.c together with a limited libc like
nolibc, use the kernels own elf.h and auxvec.h headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-12-28e14e031ed8@linutronix.de
There are no users left.
This also removes the usage of ElfXX_auxv_t, which is not formally
standardized.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-11-28e14e031ed8@linutronix.de
vdso_standalone_test_x86 is the only user of vdso_init_from_auxv().
Instead of combining the parsing the aux vector with the parsing of the
vDSO, split them apart into getauxval() and the regular
vdso_init_from_sysinfo_ehdr().
The implementation of getauxval() is taken from
tools/include/nolibc/stdlib.h.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-10-28e14e031ed8@linutronix.de
Some selftests need access to a full UAPI headers tree, for example when
building with nolibc which heavily relies on UAPI headers.
A reference to such a tree is available in the KHDR_INCLUDES variable,
but there is currently no way to populate such a tree automatically.
Provide a target that the tests can depend on to get access to usable
UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/all/20250226-parse_vdso-nolibc-v2-8-28e14e031ed8@linutronix.de
Pull for-6.14-fixes to receive:
9360dfe4cb ("sched_ext: Validate prev_cpu in scx_bpf_select_cpu_dfl()")
which conflicts with:
337d1b354a ("sched_ext: Move built-in idle CPU selection policy to a separate file")
Signed-off-by: Tejun Heo <tj@kernel.org>
Print out the index of mismatching XSAVE bytes using unsigned decimal
format. Some versions of clang complain about trying to print an integer
as an unsigned char.
x86/sev_smoke_test.c:55:51: error: format specifies type 'unsigned char'
but the argument has type 'int' [-Werror,-Wformat]
Fixes: 8c53183dba ("selftests: kvm: add test for transferring FPU state into VMSA")
Link: https://lore.kernel.org/r/20250228233852.3855676-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
During the initial mprotect(RO) stage of mmu_stress_test, keep vCPUs
spinning until all vCPUs have hit -EFAULT, i.e. until all vCPUs have tried
to write to a read-only page. If a vCPU manages to complete an entire
iteration of the loop without hitting a read-only page, *and* the vCPU
observes mprotect_ro_done before starting a second iteration, then the
vCPU will prematurely fall through to GUEST_SYNC(3) (on x86 and arm64) and
get out of sequence.
Replace the "do-while (!r)" loop around the associated _vcpu_run() with
a single invocation, as barring a KVM bug, the vCPU is guaranteed to hit
-EFAULT, and retrying on success is super confusion, hides KVM bugs, and
complicates this fix. The do-while loop was semi-unintentionally added
specifically to fudge around a KVM x86 bug, and said bug is unhittable
without modifying the test to force x86 down the !(x86||arm64) path.
On x86, if forced emulation is enabled, vcpu_arch_put_guest() may trigger
emulation of the store to memory. Due a (very, very) longstanding bug in
KVM x86's emulator, emulate writes to guest memory that fail during
__kvm_write_guest_page() unconditionally return KVM_EXIT_MMIO. While that
is desirable in the !memslot case, it's wrong in this case as the failure
happens due to __copy_to_user() hitting a read-only page, not an emulated
MMIO region.
But as above, x86 only uses vcpu_arch_put_guest() if the __x86_64__ guards
are clobbered to force x86 down the common path, and of course the
unexpected MMIO is a KVM bug, i.e. *should* cause a test failure.
Fixes: b6c304aec6 ("KVM: selftests: Verify KVM correctly handles mprotect(PROT_READ)")
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/20250208105318.16861-1-yan.y.zhao@intel.com
Debugged-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250228230804.3845860-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry
in a link list that gets freed. Then when a new entry is added
it can cause a u-a-f bug. This is fixed by restructuring the code
so that the histogram is consistent on failure and everything is
cleaned up appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now
does so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly.
It counts the functions in the file, but if there's already functions
in the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of
the function times can overflow. If the overflow happens to land
on zero, that can cause a division by zero. Check for zero from
the calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly.
For now, just prevent the system from crashing.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ8HqYBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qpoXAP90gvO2LfjItjZVjBYudr4GOzcsjAAK
cZ2vL2LJp3hT4QD+Kud2YaZqzrV8tvFFBikO7FvEV3zZpnw48895pIgcoww=
=NLe0
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix crash from bad histogram entry
An error path in the histogram creation could leave an entry in a
link list that gets freed. Then when a new entry is added it can
cause a u-a-f bug. This is fixed by restructuring the code so that
the histogram is consistent on failure and everything is cleaned up
appropriately.
- Fix fprobe self test
The fprobe self test relies on no function being attached by ftrace.
BPF programs can attach to functions via ftrace and systemd now does
so. This causes those functions to appear in the enabled_functions
list which holds all functions attached by ftrace. The selftest also
uses that file to see if functions are being connected correctly. It
counts the functions in the file, but if there's already functions in
the file, it fails. Instead, add the number of functions in the file
at the start of the test to all the calculations during the test.
- Fix potential division by zero of the function profiler stddev
The calculated divisor that calculates the standard deviation of the
function times can overflow. If the overflow happens to land on zero,
that can cause a division by zero. Check for zero from the
calculation before doing the division.
TODO: Catch when it ever overflows and report it accordingly. For
now, just prevent the system from crashing.
* tag 'trace-v6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Avoid potential division by zero in function_stat_show()
selftests/ftrace: Let fprobe test consider already enabled functions
tracing: Fix bad hist from corrupting named_triggers list
If the CPU supports Idle HLT, which elides HLT VM-Exits if the vCPU has an
unmasked pending IRQ or NMI, relax the xAPIC IPI test's assertion on the
number of HLT exits to only require that the number of exits is less than
or equal to the number of HLT instructions that were executed. I.e. don't
fail the test if Idle HLT does what it's supposed to do.
Note, unfortunately there's no way to determine if *KVM* supports Idle HLT,
as this_cpu_has() checks raw CPU support, and kvm_cpu_has() checks what can
be exposed to L1, i.e. the latter would check if KVM supports nested Idle
HLT. But, since the assert is purely bonus coverage, checking for CPU
support is good enough.
Cc: Manali Shukla <Manali.Shukla@amd.com>
Tested-by: Manali Shukla <Manali.Shukla@amd.com>
Link: https://lore.kernel.org/r/20250226231809.3183093-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add an L1 (guest) assert to the nested exceptions test to verify that KVM
doesn't put VMRUN in an STI shadow (AMD CPUs bleed the shadow into the
guest's int_state if a #VMEXIT occurs before VMRUN fully completes).
Add a similar assert to the VMX side as well, because why not.
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Enable zero copy on file backed target, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add file backed ublk target code, meantime add one fio test for
covering write verify, another test for mkfs/mount/umount.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Both ublk driver and userspace heavily depends on io_uring subsystem,
and tools/testing/selftests/ should be the best place for holding this
cross-subsystem tests.
Add basic read/write IO test over this ublk null disk, and make sure ublk
working.
More tests will be added.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20250228161919.2869102-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
GRO tests are timing dependent and can easily flake. This is partially
mitigated in gro.sh by giving each subtest 3 chances to pass. However,
this still flakes on some machines. Reduce the flakiness by:
- Bumping retries to 6.
- Setting napi_defer_hard_irqs to 1 to reduce the chance that GRO is
flushed prematurely. This also lets us reduce the gro_flush_timeout
from 1ms to 100us.
Tested: Ran `gro.sh -t large` 1000 times. There were no failures with
this change. Ran inside strace to increase flakiness.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-4-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
gro.c:main no longer erroneously claims a test passes when running as a
sender.
Tested: Ran `gro.sh -t large` to verify the sender no longer prints a
status.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-3-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify gro.sh to return a useful exit code when the -t flag is used. It
formerly returned 0 no matter what.
Tested: Ran `gro.sh -t large` and verified that test failures return 1.
Signed-off-by: Kevin Krakauer <krakauer@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250226192725.621969-2-krakauer@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The fprobe test fails on Fedora 41 since the fprobe test assumption that
the number of enabled_functions is zero before the test starts is not
necessarily true. Some user space tools, like systemd, add BPF programs
that attach to functions. Those will show up in the enabled_functions table
and must be taken into account by the fprobe test.
Therefore count the number of lines of enabled_functions before tests
start, and use that as base when comparing expected results.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250226142703.910860-1-hca@linux.ibm.com
Fixes: e85c5e9792 ("selftests/ftrace: Update fprobe test to check enabled_functions file")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
this week, so next week's PR is probably going to be bigger. A healthy
dose of fixes for bugs introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net()
RDMA driver register notifier after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue
with LED support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=+Ci7
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bluetooth.
We didn't get netfilter or wireless PRs this week, so next week's PR
is probably going to be bigger. A healthy dose of fixes for bugs
introduced in the current release nonetheless.
Current release - regressions:
- Bluetooth: always allow SCO packets for user channel
- af_unix: fix memory leak in unix_dgram_sendmsg()
- rxrpc:
- remove redundant peer->mtu_lock causing lockdep splats
- fix spinlock flavor issues with the peer record hash
- eth: iavf: fix circular lock dependency with netdev_lock
- net: use rtnl_net_dev_lock() in
register_netdevice_notifier_dev_net() RDMA driver register notifier
after the device
Current release - new code bugs:
- ethtool: fix ioctl confusing drivers about desired HDS user config
- eth: ixgbe: fix media cage present detection for E610 device
Previous releases - regressions:
- loopback: avoid sending IP packets without an Ethernet header
- mptcp: reset connection when MPTCP opts are dropped after join
Previous releases - always broken:
- net: better track kernel sockets lifetime
- ipv6: fix dst ref loop on input in seg6 and rpl lw tunnels
- phy: qca807x: use right value from DTS for DAC_DSP_BIAS_CURRENT
- eth: enetc: number of error handling fixes
- dsa: rtl8366rb: reshuffle the code to fix config / build issue with
LED support"
* tag 'net-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: ti: icss-iep: Reject perout generation request
idpf: fix checksums set in idpf_rx_rsc()
selftests: drv-net: Check if combined-count exists
net: ipv6: fix dst ref loop on input in rpl lwt
net: ipv6: fix dst ref loop on input in seg6 lwt
usbnet: gl620a: fix endpoint checking in genelink_bind()
net/mlx5: IRQ, Fix null string in debug print
net/mlx5: Restore missing trace event when enabling vport QoS
net/mlx5: Fix vport QoS cleanup on error
net: mvpp2: cls: Fixed Non IP flow, with vlan tag flow defination.
af_unix: Fix memory leak in unix_dgram_sendmsg()
net: Handle napi_schedule() calls from non-interrupt
net: Clear old fragment checksum value in napi_reuse_skb
gve: unlink old napi when stopping a queue using queue API
net: Use rtnl_net_dev_lock() in register_netdevice_notifier_dev_net().
tcp: Defer ts_recent changes until req is owned
net: enetc: fix the off-by-one issue in enetc_map_tx_tso_buffs()
net: enetc: remove the mm_lock from the ENETC v4 driver
net: enetc: add missing enetc4_link_deinit()
net: enetc: update UDP checksum when updating originTimestamp field
...
Some drivers, like tg3, do not set combined-count:
$ ethtool -l enp4s0f1
Channel parameters for enp4s0f1:
Pre-set maximums:
RX: 4
TX: 4
Other: n/a
Combined: n/a
Current hardware settings:
RX: 4
TX: 1
Other: n/a
Combined: n/a
In the case where combined-count is not set, the ethtool netlink code
in the kernel elides the value and the code in the test:
netnl.channels_get(...)
With a tg3 device, the returned dictionary looks like:
{'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'},
'rx-max': 4,
'rx-count': 4,
'tx-max': 4,
'tx-count': 1}
Note that the key 'combined-count' is missing. As a result of this
missing key the test raises an exception:
# Exception| if channels['combined-count'] == 0:
# Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^
# Exception| KeyError: 'combined-count'
Change the test to check if 'combined-count' is a key in the dictionary
first and if not assume that this means the driver has separate RX and
TX queues.
With this change, the test now passes successfully on tg3 and mlx5
(which does have a 'combined-count').
Fixes: 1cf2704242 ("net: selftest: add test for netdev netlink queue-get API")
Signed-off-by: Joe Damato <jdamato@fastly.com>
Reviewed-by: David Wei <dw@davidwei.uk>
Link: https://patch.msgid.link/20250226181957.212189-1-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change wording of test number recommendation to "the recommended number
of times".
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Add tests to check that the napi retained the IRQ after down/up,
multiple changes in the number of rx queues and after
attaching/releasing XDP program.
Tested on ice and idpf:
# NETIF=<iface> tools/testing/selftests/drivers/net/hw/irq.py
KTAP version 1
1..4
ok 1 irq.check_irqs_reported
ok 2 irq.check_reconfig_queues
ok 3 irq.check_reconfig_xdp
ok 4 irq.check_down
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
Tested-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-7-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expand IPV6_TCLASS to also cover IP_TOS.
Expand IPV6_HOPLIMIT to also cover IP_TTL.
Expand csmg_sender.c to allow setting IPv4 setsockopts.
Also rename struct v6 to cmsg to match its expanded scope.
Don't bother updating all occurrences of tclass and hoplimit.
Rename cmsg_ipv6.sh to cmsg_ip.sh to match the expanded scope.
Be careful around the subtle API difference between TCLASS and TOS.
IP_TOS includes ECN bits. Add a test to verify that these are masked
when making routing decisions.
Diff is more concise with --word-diff
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-3-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move IPV6_TCLASS and IPV6_HOPLIMIT into loops, to be able to use them
for IP_TOS and IP_TTL in a follow-on patch.
Indentation in this file is a mix of four spaces and tabs for double
indents. To minimize code churn, maintain that pattern.
Very small diff if viewing with -w.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250225022431.2083926-2-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One difference here with other pseudo-firmware bitmap registers
is that the default/reset value for the supported hypercall
function-ids is 0 at present. Hence, modify the test accordingly.
Reviewed-by: Sebastian Ott <sebott@redhat.com>
Signed-off-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/r/20250221140229.12588-7-shameerali.kolothum.thodi@huawei.com
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Below is a setup with extended linear cache configuration with an example
layout of memory region shown below presented as a single memory region
consists of 256G memory where there's 128G of DRAM and 128G of CXL memory.
The kernel sees a region of total 256G of system memory.
128G DRAM 128G CXL memory
|-----------------------------------|-------------------------------------|
Data resides in either DRAM or far memory (FM) with no replication. Hot
data is swapped into DRAM by the hardware behind the scenes. When error is
detected in one location, it is possible that error also resides in the
aliased location. Therefore when a memory location that is flagged by MCE
is part of the special region, the aliased memory location needs to be
offlined as well.
Add an mce notify callback to identify if the MCE address location is part
of an extended linear cache region and handle accordingly.
Added symbol export to set_mce_nospec() in x86 code in order to call
set_mce_nospec() from the CXL MCE notify callback.
Link: https://lore.kernel.org/linux-cxl/668333b17e4b2_5639294fd@dwillia2-xfh.jf.intel.com.notmuch/
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250226162224.3633792-5-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This reverts commit 16767502aa.
Nolibc gained support for uname(2) and sscanf(3) which are the
dependencies of ksft_min_kernel_version().
So re-enable support for ksft_min_kernel_version() under nolibc.
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250209-nolibc-scanf-v2-2-c29dea32f1cd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
These functions are used often, also in selftests.
sscanf() itself is also used by kselftest.h itself.
The implementation is limited and only supports numeric arguments.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250209-nolibc-scanf-v2-1-c29dea32f1cd@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The uprobe events test fails on s390, but also on x86 (Fedora 41). The
problem appears to be that there is an assumption that adding a uprobe to
the beginning of the executable mapping of /bin/sh is sufficient to trigger
a uprobe event when /bin/sh is executed.
This assumption is not necessarily true. Therefore use "readelf -h" to find
the entry point address of /bin/sh and use this address when adding the
uprobe event.
This adds a dependency to readelf which is not always installed. Therefore
add a check and exit with exit_unresolved if it is not installed.
Link: https://lore.kernel.org/r/20250220130102.2079179-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The current cxl region size only indicates the size of the CXL memory
region without accounting for the extended linear cache size. Retrieve the
cache size from HMAT and append that to the cxl region size for the cxl
region range that matches the SRAT range that has extended linear cache
enabled.
The SRAT defines the whole memory range that includes the extended linear
cache and the CXL memory region. The new HMAT ECN/ECR to the Memory Side
Cache Information Structure defines the size of the extended linear cache
size and matches to the SRAT Memory Affinity Structure by the memory
proxmity domain. Add a helper to match the cxl range to the SRAT memory
range in order to retrieve the cache size.
There are several places that checks the cxl region range against the
decoder range. Use new helper to check between the two ranges and address
the new cache size.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20250226162224.3633792-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZ785FhAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSILQBAMFwpFClzjVeWyLFNd/gaTlPWeedvnag+yZu
CK9q39jOAP9tj1unQBFpsI7jsTk6ZxPVxb4DymPIirZMb/5FuxUnDQ==
=QrSM
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
Add a selftest to validate the behavior of the NUMA-aware scheduler
functionalities, including idle CPU selection within nodes, per-node
DSQs and CPU to node mapping.
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Introducing test for veristat, part of test_progs.
Test cases cover functionality of setting global variables in BPF
program.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250225163101.121043-3-mykyta.yatsenko5@gmail.com
To better verify some complex BPF programs we'd like to preset global
variables.
This patch introduces CLI argument `--set-global-vars` or `-G` to
veristat, that allows presetting values to global variables defined
in BPF program. For example:
prog.c:
```
enum Enum { ELEMENT1 = 0, ELEMENT2 = 5 };
const volatile __s64 a = 5;
const volatile __u8 b = 5;
const volatile enum Enum c = ELEMENT2;
const volatile bool d = false;
char arr[4] = {0};
SEC("tp_btf/sched_switch")
int BPF_PROG(...)
{
bpf_printk("%c\n", arr[a]);
bpf_printk("%c\n", arr[b]);
bpf_printk("%c\n", arr[c]);
bpf_printk("%c\n", arr[d]);
return 0;
}
```
By default verification of the program fails:
```
./veristat prog.bpf.o
```
By presetting global variables, we can make verification pass:
```
./veristat wq.bpf.o -G "a = 0" -G "b = 1" -G "c = 2" -G "d = 3"
```
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250225163101.121043-2-mykyta.yatsenko5@gmail.com
Update usdt tests to also check for correct behavior of
bpf_usdt_arg_size().
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20250224235756.2612606-2-ihor.solodrai@linux.dev
Add cxl-test emulation of Get Supported Features mailbox command.
Currently only adding a test feature with feature identifier of
all f's for testing.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Link: https://patch.msgid.link/20250220194438.2281088-4-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
CXL spec r3.2 8.2.9.6.1 Get Supported Features (Opcode 0500h)
The command retrieve the list of supported device-specific features
(identified by UUID) and general information about each Feature.
The driver will retrieve the Feature entries in order to make checks and
provide information for the Get Feature and Set Feature command. One of
the main piece of information retrieved are the effects a Set Feature
command would have for a particular feature. The retrieved Feature
entries are stored in the cxl_mailbox context.
The setup of Features is initiated via devm_cxl_setup_features() during the
pci probe function before the cxl_memdev is enumerated.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Tested-by: Shiju Jose <shiju.jose@huawei.com>
Link: https://patch.msgid.link/20250220194438.2281088-3-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Add netns cookie test that verifies the helper is now supported and work
in the context of cgroup_skb programs.
Signed-off-by: Mahe Tardy <mahe.tardy@gmail.com>
Link: https://lore.kernel.org/r/20250225125031.258740-2-mahe.tardy@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add xstate testing specifically for those vector register states,
validating kernel's context switching and ensuring ABI compliance.
Use the established xstate testing framework.
Alternatively, this invocation could be placed directly in
xstate.c::main(). However, the current test file naming convention, which
clearly specifies the tested area, seems reasonable. Adding avx.c
considerably aligns with that convention.
The test output should be like this for ZMM_Hi256 as an example:
$ avx_64
...
[RUN] AVX-512 ZMM_Hi256: check context switches, 10 iterations, 5 threads.
[OK] No incorrect case was found.
[RUN] AVX-512 ZMM_Hi256: inject xstate via ptrace().
[OK] 'xfeatures' in SW reserved area was correctly written
[OK] xstate was correctly updated.
[RUN] AVX-512 ZMM_Hi256: load xstate and raise SIGUSR1
[OK] 'magic1' is valid
[OK] 'xfeatures' in SW reserved area is valid
[OK] 'xfeatures' in XSAVE header is valid
[OK] xstate delivery was successful
[OK] 'magic2' is valid
[RUN] AVX-512 ZMM_Hi256: load new xstate from sighandler and check it after sigreturn
[OK] xstate was restored correctly
But systems without AVX-512 will look like:
...
The kernel does not support feature number: 5
The kernel does not support feature number: 6
The kernel does not support feature number: 7
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-10-chang.seok.bae@intel.com
The established xstate test code is designed to be generic, but certain
xstates require special handling and cannot be tested without additional
adjustments.
Clarify which xstates are currently supported, and enforce testing only
for them.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-9-chang.seok.bae@intel.com
Currently, each of the three xstate tests runs as a separate invocation,
requiring the xstate number to be passed and state information to be
reconstructed repeatedly. This approach arose from their individual and
isolated development, but now it makes sense to unify them.
Introduce a wrapper function that first verifies feature availability
from the kernel and constructs the necessary state information once. The
wrapper then sequentially invokes all tests to ensure consistent
execution.
Update the AMX test to use this unified invocation.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-8-chang.seok.bae@intel.com
With the refactored test cases, another xstate exposure to userspace is
through signal delivery. While amx.c includes signal-related scenarios,
its primary focus is on xstate permission management, which is largely
specific to dynamic states.
The remaining gap is testing xstate preservation and restoration across
signal delivery. The kernel defines an ABI for presenting xstate in the
signal frame, closely resembling the hardware XSAVE format, where xstate
modification is also possible.
Introduce a new test case to verify xstate preservation across signal
delivery and return, that is ensuring ABI compatibility by:
- Loading xstate before raising a signal.
- Verifying correct exposure in the signal frame
- Modifying xstate in the signal frame before returning.
- Checking the state restoration upon signal return.
Integrate this test into the AMX test suite as an initial usage site.
Expected output:
$ amx_64
...
[RUN] AMX Tile data: load xstate and raise SIGUSR1
[OK] 'magic1' is valid
[OK] 'xfeatures' in SW reserved area is valid
[OK] 'xfeatures' in XSAVE header is valid
[OK] xstate delivery was successful
[OK] 'magic2' is valid
[RUN] AMX Tile data: load new xstate from sighandler and check it after sigreturn
[OK] xstate was restored correctly
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-7-chang.seok.bae@intel.com
Following the refactoring of the context switching test, the ptrace test is
another component reusable for other xstate features. As part of this
restructuring, add a missing check to validate the
user_xstateregs->xstate_fx_sw field in the ABI.
Also, replace err() and fatal_error() with ksft_exit_fail_msg() for
consistency in error handling.
Expected output:
$ amx_64
...
[RUN] AMX Tile data: inject xstate via ptrace().
[OK] 'xfeatures' in SW reserved area was correctly written
[OK] xstate was correctly updated.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-6-chang.seok.bae@intel.com
The existing context switching and ptrace tests in amx.c are not specific
to dynamic states, making them reusable for general xstate testing.
As a first step, move the context switching test to xstate.c. Refactor
the test code to allow specifying which xstate component being tested.
To decouple the test from dynamic states, remove the permission request
code. In fact, The permission request inside the test wrapper was
redundant.
Additionally, replace fatal_error() with ksft_exit_fail_msg() for
consistency in error handling.
Expected output:
$ amx_64
...
[RUN] AMX Tile data: check context switches, 10 iterations, 5 threads.
[OK] No incorrect case was found.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-5-chang.seok.bae@intel.com
After moving essential helpers from amx.c, the code remains neutral
regarding which xstate components it handles. However, explicitly listing
known components helps users identify which features are ready for
testing.
Enumerate xstate components to facilitate identification. Extend struct
xstate_info to include a name field, providing a human-readable
identifier.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-4-chang.seok.bae@intel.com
The AMX test introduced several XSAVE-related helper functions, but so
far, it has been the only user of them. These helpers can be generalized
for broader test of multiple xstate features.
Move most XSAVE-related code into xsave.h, making it shareable. The
restructuring includes:
* Establishing low-level XSAVE helpers for saving and restoring register
states, as well as handling XSAVE buffers.
* Generalizing state data manipuldations: set_rand_data()
* Introducing a generic feature query helper: get_xstate_info()
While doing so, remove unused defines in amx.c.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-3-chang.seok.bae@intel.com
The x86 selftests frequently register and clean up signal handlers, but
the sethandler() and clearhandler() functions have been redundantly
copied across multiple .c files.
Move these functions to helpers.h to enable reuse across tests,
eliminating around 250 lines of duplicate code.
Converge the error handling by using ksft_exit_fail_msg(), which is
functionally equivalent with err() within the selftest framework.
This change is a prerequisite for the upcoming xstate selftest, which
requires signal handling for registering and cleaning up handlers.
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250226010731.2456-2-chang.seok.bae@intel.com
Assert that MIDR_EL1, REVIDR_EL1, AIDR_EL1 are writable from userspace,
that the changed values are visible to guests, and that they are
preserved across a vCPU reset.
Signed-off-by: Sebastian Ott <sebott@redhat.com>
Link: https://lore.kernel.org/r/20250225005401.679536-6-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Test gen_prologue and gen_epilogue that generate kfuncs that have not
been seen in the main program.
The main bpf program and return value checks are identical to
pro_epilogue.c introduced in commit 47e69431b5 ("selftests/bpf: Test
gen_prologue and gen_epilogue"). However, now when bpf_testmod_st_ops
detects a program name with prefix "test_kfunc_", it generates slightly
different prologue and epilogue: They still add 1000 to args->a in
prologue, add 10000 to args->a and set r0 to 2 * args->a in epilogue,
but involve kfuncs.
At high level, the alternative version of prologue and epilogue look
like this:
cgrp = bpf_cgroup_from_id(0);
if (cgrp)
bpf_cgroup_release(cgrp);
else
/* Perform what original bpf_testmod_st_ops prologue or
* epilogue does
*/
Since 0 is never a valid cgroup id, the original prologue or epilogue
logic will be performed. As a result, the __retval check should expect
the exact same return value.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250225233545.285481-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a selftest that verifies symmetric RSS hash is working as intended.
The test runs iterations of traffic, swapping the src/dst UDP ports, and
verifies that the same RX queue is receiving the traffic in both cases.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250224174416.499070-5-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of guessing a port and checking whether it's available, get an
available port from the OS.
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250224174416.499070-4-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some distributions may not enable MPTCP by default. All other MPTCP tests
source mptcp_lib.sh to ensure MPTCP is enabled before testing. However,
the ip_local_port_range test is the only one that does not include this
step.
Let's also ensure MPTCP is enabled in netns for ip_local_port_range so
that it passes on all distributions.
Suggested-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250224094013.13159-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix tools/ quiet build Makefile infrastructure that was broken when
working on tools/perf/ without testing on other tools/ living
utilities.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCZ74OJwAKCRCyPKLppCJ+
J30mAPsHCA8A+CNq/5yW2VhFLV1GgCSL5oWqxXRn7QjhSrCQBQEAot2u4O5zXs7M
sg+mPlYiS1oT+zmvTLlXrN+bVyWP9A4=
=jH1N
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix tools/ quiet build Makefile infrastructure that was broken when
working on tools/perf/ without testing on other tools/ living
utilities.
* tag 'perf-tools-fixes-for-v6.14-2-2025-02-25' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
tools: Remove redundant quiet setup
tools: Unify top-level quiet infrastructure
* A fix for cacheinfo DT probing to avoid reading non-boolean properties
as booleans.
* A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
* Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
* A fix for the rseq selftests, which was using an invalid constraint.
* A pair of fixes for signal frame size handling:
* We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
* We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
-----BEGIN PGP SIGNATURE-----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=+DfW
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for cacheinfo DT probing to avoid reading non-boolean
properties as booleans.
- A fix for cpufeature to use bitmap_equal() instead of memcmp(), so
unused bits are ignored.
- Fixes for cmpxchg and futex cmpxchg that properly encode the sign
extension requirements on inline asm, which results in spurious
successes. This manifests in at least inode_set_ctime_current, but is
likely just a disaster waiting to happen.
- A fix for the rseq selftests, which was using an invalid constraint.
- A pair of fixes for signal frame size handling:
- We were reserving space for an extra empty extension context
header on systems with extended signal context, thus resulting in
unnecessarily large allocations.
- We weren't properly checking for available extensions before
calculating the signal stack size, which resulted in undersized
stack allocations on some systems (at least those with T-Head
custom vectors).
Also, we've added Alex as a reviewer. He's been helping out a ton
lately, thanks!
* tag 'riscv-for-linus-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Add myself as a riscv reviewer
riscv: signal: fix signal_minsigstksz
riscv: signal: fix signal frame size
rseq/selftests: Fix riscv rseq_offset_deref_addv inline asm
riscv/futex: sign extend compare value in atomic cmpxchg
riscv/atomic: Do proper sign extension also for unsigned in arch_cmpxchg
riscv: cpufeature: use bitmap_equal() instead of memcmp()
riscv: cacheinfo: Use of_property_present() for non-boolean properties
Shawn Lin <shawn.lin@rock-chips.com> says:
This patchset adds initial UFS controller supprt for RK3576 SoC.
Patch 1 is the dt-bindings. Patch 2-4 deal with rpm and spm support
in advanced suggested by Ulf. Patch 5 exports two new APIs for host
driver. Patch 6 and 7 are the host driver and dtsi support.
Link: https://lore.kernel.org/r/1738736156-119203-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In parse_abi function,the dyn_test fails because the
enable_file isn’t closed after successfully registering an event.
By adding wait_for_delete(), the dyn_test now passes as expected.
Link: https://lore.kernel.org/r/20250221033555.326716-1-realxxyq@163.com
Signed-off-by: Yiqian Xun <xunyiqian@kylinos.cn>
Acked-by: Beau Belgrave <beaub@linux.microsoft.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Test XDP and HDS interaction. While at it add a test for using the IOCTL,
as that turned out to be the real culprit.
Testing bnxt:
# NETIF=eth0 ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable # SKIP disabling of HDS not supported by the device
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:11 fail:0 xfail:0 xpass:0 skip:1 error:0
and netdevsim:
# ./ksft-net-drv/drivers/net/hds.py
KTAP version 1
1..12
ok 1 hds.get_hds
ok 2 hds.get_hds_thresh
ok 3 hds.set_hds_disable
ok 4 hds.set_hds_enable
ok 5 hds.set_hds_thresh_zero
ok 6 hds.set_hds_thresh_max
ok 7 hds.set_hds_thresh_gt
ok 8 hds.set_xdp
ok 9 hds.enabled_set_xdp
ok 10 hds.ioctl
ok 11 hds.ioctl_set_xdp
ok 12 hds.ioctl_enabled_set_xdp
# Totals: pass:12 fail:0 xfail:0 xpass:0 skip:0 error:0
Netdevsim needs a sane default for tx/rx ring size.
ethtool 6.11 is needed for the --disable-netlink option.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Tested-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20250221025141.1132944-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest case to iou-zcrx where the sender sends 4x4K = 16K and
the receiver does 4x4K recvzc requests. Validate that the requests
complete successfully and that the data is not corrupted.
Signed-off-by: David Wei <dw@davidwei.uk>
Link: https://lore.kernel.org/r/20250224041319.2389785-3-dw@davidwei.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a rudimentary test for validating KVM's handling of L1 hypervisor
intercepts during instruction emulation on behalf of L2. To minimize
complexity and avoid overlap with other tests, only validate KVM's
handling of instructions that L1 wants to intercept, i.e. that generate a
nested VM-Exit. Full testing of emulation on behalf of L2 is better
achieved by running existing (forced) emulation tests in a VM, (although
on VMX, getting L0 to emulate on #UD requires modifying either L1 KVM to
not intercept #UD, or modifying L0 KVM to prioritize L0's exception
intercepts over L1's intercepts, as is done by KVM for SVM).
Since emulation should never be successful, i.e. L2 always exits to L1,
dynamically generate the L2 code stream instead of adding a helper for
each instruction. Doing so requires hand coding instruction opcodes, but
makes it significantly easier for the test to compute the expected "next
RIP" and instruction length.
Link: https://lore.kernel.org/r/20250201015518.689704-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to ftrace.
The manager ops does not have any callback but calls the sub-ops
callbacks. The manage ops hashes (what is used to tell ftrace what
functions to attach to) is built on the sub-ops it manages.
There was an error in the way it built the hash. An empty hash means to
attach to all functions. When the manager ops had one sub-ops it properly
copied its hash. But when the manager ops had more than one sub-ops, it
went into a loop to make a set of all functions it needed to add to the
hash. If any of the subops hashes was empty, that would mean to attach
to all functions. The error was that the first iteration of the loop
passed in an empty hash to start with in order to add the other hashes.
That starting hash was mistaken as to attach to all functions. This made
the manage ops attach to all functions whenever it had two or more
sub-ops, even if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for that
function will be added to the manager ops for each subops. This causes
waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is attached
to. It also has a counter of how many fprobes are attached. When the last
fprobe is removed, it unregisters the fprobe from ftrace but does not
remove the functions the last fprobe was attached to from the hash. This
leaves the old functions attached. When a new fprobe is added, the fprobe
infrastructure attaches to not only the functions of the new fprobe, but
also to the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes from
zero to one, it attaches its ops to ftrace. When an fprobe is removed, the
counter is decremented. If the counter goes from 1 to zero, it removes the
fprobes ops from ftrace. There was an issue where if two fprobes trace the
same function, the addition of each fprobe would increment the counter.
But when removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not remove
the functions from the ftrace ops. But it also did not decrement the
counter. When the last fprobe is removed, the counter is still one. This
leaves the fprobes callback still registered with ftrace and it being
called by the functions defined by the fprobes ops hash. Worse yet,
because all the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions. Thus, this puts the
state of the system where every function is calling the fprobe callback
handler (which does nothing as there are no registered fprobes), but this
causes a good 13% slow down of the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which added
another layer of preempt disable. As the preempt_count gets traced in the
event, it needs to subtract the amount of preempt disabling the tracer
does to record what the preempt_count was when the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that is
set by the return of the next() function. The start() function allocates
it and the stop() function frees it. But when the last item is found, the
next() returns NULL which leaks the data that was allocated in start().
The m->private is used for something else, so have next() free the data
when it returns NULL, as stop() will then just receive NULL in that case.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZ7j6ARQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quFxAQDrO8tjYbhLqg/LMOQyzwn/EF3Jx9ub
87961mA0rKTkYwEAhPNzTZ6GwKyKc4ny/R338KgNY69wWnOK6k/BTxCRmwk=
=TOah
-----END PGP SIGNATURE-----
Merge tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Function graph accounting fixes:
- Fix the manage ops hashes
The function graph registers a "manager ops" and "sub-ops" to
ftrace. The manager ops does not have any callback but calls the
sub-ops callbacks. The manage ops hashes (what is used to tell
ftrace what functions to attach to) is built on the sub-ops it
manages.
There was an error in the way it built the hash. An empty hash
means to attach to all functions. When the manager ops had one
sub-ops it properly copied its hash. But when the manager ops had
more than one sub-ops, it went into a loop to make a set of all
functions it needed to add to the hash. If any of the subops hashes
was empty, that would mean to attach to all functions. The error
was that the first iteration of the loop passed in an empty hash to
start with in order to add the other hashes. That starting hash was
mistaken as to attach to all functions. This made the manage ops
attach to all functions whenever it had two or more sub-ops, even
if each sub-op was attached to only a single function.
- Do not add duplicate entries to the manager ops hash
If two or more subops hashes trace the same function, an entry for
that function will be added to the manager ops for each subops.
This causes waste and extra overhead.
Fprobe accounting fixes:
- Remove last function from fprobe hash
Fprobes has a ftrace hash to manage which functions an fprobe is
attached to. It also has a counter of how many fprobes are
attached. When the last fprobe is removed, it unregisters the
fprobe from ftrace but does not remove the functions the last
fprobe was attached to from the hash. This leaves the old functions
attached. When a new fprobe is added, the fprobe infrastructure
attaches to not only the functions of the new fprobe, but also to
the functions of the last fprobe.
- Fix accounting of the fprobe counter
When a fprobe is added, it updates a counter. If the counter goes
from zero to one, it attaches its ops to ftrace. When an fprobe is
removed, the counter is decremented. If the counter goes from 1 to
zero, it removes the fprobes ops from ftrace.
There was an issue where if two fprobes trace the same function,
the addition of each fprobe would increment the counter. But when
removing the first of the fprobes, it would notice that another
fprobe is still attached to one of its functions no it does not
remove the functions from the ftrace ops.
But it also did not decrement the counter, so when the last fprobe
is removed, the counter is still one. This leaves the fprobes
callback still registered with ftrace and it being called by the
functions defined by the fprobes ops hash. Worse yet, because all
the functions from the fprobe ops hash have been removed, that
tells ftrace that it wants to trace all functions.
Thus, this puts the state of the system where every function is
calling the fprobe callback handler (which does nothing as there
are no registered fprobes), but this causes a good 13% slow down of
the entire system.
Other updates:
- Add a selftest to test the above issues to prevent regressions.
- Fix preempt count accounting in function tracing
Better recursion protection was added to function tracing which
added another layer of preempt disable. As the preempt_count gets
traced in the event, it needs to subtract the amount of preempt
disabling the tracer does to record what the preempt_count was when
the trace was triggered.
- Fix memory leak in output of set_event
A variable is passed by the seq_file functions in the location that
is set by the return of the next() function. The start() function
allocates it and the stop() function frees it. But when the last
item is found, the next() returns NULL which leaks the data that
was allocated in start(). The m->private is used for something
else, so have next() free the data when it returns NULL, as stop()
will then just receive NULL in that case"
* tag 'ftrace-v6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix memory leak when reading set_event file
ftrace: Correct preemption accounting for function tracing.
selftests/ftrace: Update fprobe test to check enabled_functions file
fprobe: Fix accounting of when to unregister from function graph
fprobe: Always unregister fgraph function from ops
ftrace: Do not add duplicate entries in subops manager ops
ftrace: Fix accounting of adding subops to a manager ops
This test adds coverage of expected errors during rseq registration and
unregistration, it disables glibc integration and will thus always
exercise the rseq syscall explictly.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250121213402.1754762-1-mjeanson@efficios.com
Recent change in how get_user() handles pointers:
https://lore.kernel.org/all/20241024013214.129639-1-torvalds@linux-foundation.org/
has a specific case for LAM. It assigns a different bitmask that's
later used to check whether a pointer comes from userland in get_user().
Add test case to LAM that utilizes a ioctl (FIOASYNC) syscall which uses
get_user() in its implementation. Execute the syscall with differently
tagged pointers to verify that valid user pointers are passing through
and invalid kernel/non-canonical pointers are not.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/1624d9d1b9502517053a056652d50dc5d26884ac.1737990375.git.maciej.wieczor-retman@intel.com
Until LASS is merged into the kernel:
https://lore.kernel.org/all/20241028160917.1380714-1-alexander.shishkin@linux.intel.com/
LAM is left disabled in the config file. Running the LAM selftest with
disabled LAM only results in unhelpful output.
Use one of LAM syscalls() to determine whether the kernel was compiled
with LAM support (CONFIG_ADDRESS_MASKING) or not. Skip running the tests
in the latter case.
Merge CPUID checking function with the one mentioned above to achieve a
single function that shows LAM's availability from both CPU and the
kernel.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/251d0f45f6a768030115e8d04bc85458910cb0dc.1737990375.git.maciej.wieczor-retman@intel.com
In current form cpu_has_la57() reports platform's support for LA57
through reading the output of cpuid. A much more useful information is
whether 5-level paging is actually enabled on the running system.
Check whether 5-level paging is enabled by trying to map a page in the
high linear address space.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/8b1ca51b13e6d94b5a42b6930d81b692cbb0bcbb.1737990375.git.maciej.wieczor-retman@intel.com
The current test marks all unexpected return values as failed and sets ret
to 1. If a test is skipped, the entire test also returns 1, incorrectly
indicating failure.
To fix this, add a skipped variable and set ret to 4 if it was previously
0. Otherwise, keep ret set to 1.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250220085326.1512814-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for FIB rules that match on DSCP with a mask. Test both good
and bad flows and both the input and output paths.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: dscp redirect to table [ OK ]
TEST: rule6 check: dscp no redirect to table [ OK ]
TEST: rule6 del by pref: dscp redirect to table [ OK ]
TEST: rule6 check: iif dscp redirect to table [ OK ]
TEST: rule6 check: iif dscp no redirect to table [ OK ]
TEST: rule6 del by pref: iif dscp redirect to table [ OK ]
TEST: rule6 check: dscp masked redirect to table [ OK ]
TEST: rule6 check: dscp masked no redirect to table [ OK ]
TEST: rule6 del by pref: dscp masked redirect to table [ OK ]
TEST: rule6 check: iif dscp masked redirect to table [ OK ]
TEST: rule6 check: iif dscp masked no redirect to table [ OK ]
TEST: rule6 del by pref: iif dscp masked redirect to table [ OK ]
[...]
Tests passed: 316
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20250220080525.831924-7-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCZ7ffOQAKCRAraS+Z+3y5
EzVHAP9h/QkeYoOZW9gul08I8vFiZsFe/lbOSLJWxeVfxb9JhgD/cMqby3qAxQK6
lsdNQ9jYG2232Wym89ag7fvTBK15Wg4=
=gkN2
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Add test for creating link in another netns when a link of the same
name and ifindex exists in current netns.
- Add test to verify that link is created in target netns directly -
no link new/del events should be generated in link netns or current
netns.
- Add test cases to verify that link-netns is set as expected for
various drivers and combination of namespace-related parameters.
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Link: https://patch.msgid.link/20250219125039.18024-14-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change netns of current thread and switch back on context exit.
For example:
with NetNSEnter("ns1"):
ip("link add dummy0 type dummy")
The command be executed in netns "ns1".
Signed-off-by: Xiao Liang <shaw.leon@gmail.com>
Link: https://patch.msgid.link/20250219125039.18024-13-shaw.leon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A few bugs were found in the fprobe accounting logic along with it using
the function graph infrastructure. Update the fprobe selftest to catch
those bugs in case they or something similar shows up in the future.
The test now checks the enabled_functions file which shows all the
functions attached to ftrace or fgraph. When enabling a fprobe, make sure
that its corresponding function is also added to that file. Also add two
more fprobes to enable to make sure that the fprobe logic works properly
with multiple probes.
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Link: https://lore.kernel.org/20250220202055.733001756@goodmis.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Fix the grammatical/spelling errors in sysctl/sysctl.sh.
This fixes all errors pointed out by codespell in the file.
Signed-off-by: Chandra Pratap <chandrapratap3519@gmail.com>
Signed-off-by: Joel Granados <joel.granados@kernel.org>
Test if the verifier rejects struct_ops program with __ref argument
calling bpf_tail_call().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250220221532.1079331-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test is for AF_XDP, we refer to AF_XDP as XSK.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid exceptions when xsk attr is not present, and add a proper ksft
helper for "not in" condition.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We use wait_port_listen() extensively to wait for a process
we spawned to be ready. Not all processes will open listening
sockets. Add a method of explicitly waiting for a child to
be ready. Pass a FD to the spawned process and wait for it
to write a message to us. FD number is passed via KSFT_READY_FD
env variable.
Similarly use KSFT_WAIT_FD to let the child process for a sign
that we are done and child should exit. Sending a signal to
a child with shell=True can get tricky.
Make use of this method in the queues test to make it less flaky.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Separate the support check from socket binding for easier refactoring.
Use: ./helper - - just to probe if we can open the socket.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kurt and Joe report missing new line at the end of Usage.
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cfg.rpath() helper was been recently added to make formatting
paths for helper binaries easier.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Joe Damato reports that some shells will fork before running
the command when python does "sh -c $cmd", while bash on my
machine does an exec of $cmd directly.
This will have implications for our ability to terminate
the child process on various configurations of bash and
other shells. Warn about using
bkg(... shell=True, termininate=True)
most background commands can hopefully exit cleanly (exit_wait).
Link: https://lore.kernel.org/Z7Yld21sv_Ip3gQx@LQ3V64L9R2
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Joe Damato <jdamato@fastly.com>
Tested-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250219234956.520599-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a soft-lockup in BPF arena_map_free on 64k page size
kernels (Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding
kfree_skb to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's
freeze_mutex (Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when
eth_skb_pkt_type is accessing skb data not containing an
Ethernet header (Shigeru Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch
(Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2)
in user space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
-----BEGIN PGP SIGNATURE-----
iIsEABYKADMWIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZ7evlRUcZGFuaWVsQGlv
Z2VhcmJveC5uZXQACgkQ2yufC7HISIPwHgD/dTvM00Ck4Q73fPivyT7tcqxeXJlD
D6ggzWl/SG9LAbwA/2/cSgAM9Jm1g7ddvn/S9QaDYOs5GmFl6urq6krs+tYD
=FCs9
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Add launch time hardware offload request to xdp_hw_metadata. Users can
configure the delta of launch time relative to HW RX-time using the "-l"
argument. By default, the delta is set to 0 ns, which means the launch time
is disabled. By setting the delta to a non-zero value, the launch time
hardware offload feature will be enabled and requested. Additionally, users
can configure the Tx Queue to be enabled with the launch time hardware
offload using the "-L" argument. By default, Tx Queue 0 will be used.
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250216093430.957880-3-yoong.siang.song@intel.com
BPF program calculates a couple of latency deltas between each tx
timestamping callbacks. It can be used in the real world to diagnose
the kernel behaviour in the tx path.
Check the safety issues by accessing a few bpf calls in
bpf_test_access_bpf_calls() which are implemented in the patch 3 and 4.
Check if the bpf timestamping can co-exist with socket timestamping.
There remains a few realistic things[1][2] to highlight:
1. in general a packet may pass through multiple qdiscs. For instance
with bonding or tunnel virtual devices in the egress path.
2. packets may be resent, in which case an ACK might precede a repeat
SCHED and SND.
3. erroneous or malicious peers may also just never send an ACK.
[1]: https://lore.kernel.org/all/67a389af981b0_14e0832949d@willemb.c.googlers.com.notmuch/
[2]: https://lore.kernel.org/all/c329a0c1-239b-4ca1-91f2-cb30b8dd2f6a@linux.dev/
Signed-off-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250220072940.99994-13-kerneljasonxing@gmail.com
32-bit s390 is very close to the existing 64-bit implementation.
Some special handling is necessary as there is neither LLVM nor
QEMU support. Also the kernel itself can not build natively for 32-bit
s390, so instead the test program is executed with a 64-bit kernel.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250206-nolibc-s390-v2-2-991ad97e3d58@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Support for 32-bit s390 is about to be added.
As "s39032" would look horrible, use the another naming scheme.
32-bit s390 is "s390" and 64-bit s390 is "s390x",
similar to how it is handled in various toolchain components.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250206-nolibc-s390-v2-1-991ad97e3d58@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The nolibc testsuite can be run against other libcs to test for
interoperability. Some aspects of the constructor execution are not
standardized and musl does not provide all tested feature, for one it
does not provide arguments to the constructors, anymore?
Skip the constructor tests on non-nolibc configurations.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250212-nolibc-test-constructor-v1-1-c963875b3da4@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The tests:
trigger-action-hist-xfail.tc
trigger-onchange-action-hist.tc
trigger-snapshot-action-hist.tc
trigger-hist-expressions.tc
can all run in an instance. Test them in an instance as well.
Link: https://lore.kernel.org/r/20250220185846.451234966@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The triggers set in trigger-onchange-action-hist.tc and
trigger-snapshot-action-hist.tc are not cleaned up at the end. These tests
can also be done in instances and without cleaning up the triggers, the
instances can not be removed as they are still "busy".
Link: https://lore.kernel.org/r/20250220185846.291817731@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
For the tests that have both a README attribute as well as the instance
flag to run the tests as an instance, the instance version will always
exit with UNSUPPORTED. That's because the instance directory does not
contain a README file. Currently, the tests check for a README file in the
directory that the test runs in and if there's a requirement for something
to be present in the README file, it will not find it, as the instance
directory doesn't have it.
Have the tests check if the current directory is an instance directory,
and if it is, check two directories above the current directory for the
README file:
/sys/kernel/tracing/README
/sys/kernel/tracing/instances/foo/../../README
Link: https://lore.kernel.org/r/20250220185846.130216270@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev)).
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth: geneve: fix use-after-free in geneve_find_dev().
- eth: ibmvnic: don't reference skb after sending to VIOS
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=pEjU
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Smaller than usual with no fixes from any subtree.
Current release - regressions:
- core: fix race of rtnl_net_lock(dev_net(dev))
Previous releases - regressions:
- core: remove the single page frag cache for good
- flow_dissector: fix handling of mixed port and port-range keys
- sched: cls_api: fix error handling causing NULL dereference
- tcp:
- adjust rcvq_space after updating scaling ratio
- drop secpath at the same time as we currently drop dst
- eth: gtp: suppress list corruption splat in gtp_net_exit_batch_rtnl().
Previous releases - always broken:
- vsock:
- fix variables initialization during resuming
- for connectible sockets allow only connected
- eth:
- geneve: fix use-after-free in geneve_find_dev()
- ibmvnic: don't reference skb after sending to VIOS"
* tag 'net-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: skb: introduce and use a single page frag cache"
net: allow small head cache usage with large MAX_SKB_FRAGS values
nfp: bpf: Add check for nfp_app_ctrl_msg_alloc()
tcp: drop secpath at the same time as we currently drop dst
net: axienet: Set mac_managed_pm
arp: switch to dev_getbyhwaddr() in arp_req_set_public()
net: Add non-RCU dev_getbyhwaddr() helper
sctp: Fix undefined behavior in left shift operation
selftests/bpf: Add a specific dst port matching
flow_dissector: Fix port range key handling in BPF conversion
selftests/net/forwarding: Add a test case for tc-flower of mixed port and port-range
flow_dissector: Fix handling of mixed port and port-range keys
geneve: Suppress list corruption splat in geneve_destroy_tunnels().
gtp: Suppress list corruption splat in gtp_net_exit_batch_rtnl().
dev: Use rtnl_net_dev_lock() in unregister_netdev().
net: Fix dev_net(dev) race in unregister_netdevice_notifier_dev_net().
net: Add net_passive_inc() and net_passive_dec().
net: pse-pd: pd692x0: Fix power limit retrieval
MAINTAINERS: trim the GVE entry
gve: set xdp redirect target only when it is available
...
Add a simple test for TSO. Send a few MB of data and check device
stats to verify that the device was performing segmentation.
Do the same thing over a few tunnel types.
Injecting GSO packets directly would give us more ability to test
corner cases, but perhaps starting simple is good enough?
# ./ksft-net-drv/drivers/net/hw/tso.py
# Detected qstat for LSO wire-packets
KTAP version 1
1..14
ok 1 tso.ipv4 # SKIP Test requires IPv4 connectivity
ok 2 tso.vxlan4_ipv4 # SKIP Test requires IPv4 connectivity
ok 3 tso.vxlan6_ipv4 # SKIP Test requires IPv4 connectivity
ok 4 tso.vxlan_csum4_ipv4 # SKIP Test requires IPv4 connectivity
ok 5 tso.vxlan_csum6_ipv4 # SKIP Test requires IPv4 connectivity
ok 6 tso.gre4_ipv4 # SKIP Test requires IPv4 connectivity
ok 7 tso.gre6_ipv4 # SKIP Test requires IPv4 connectivity
ok 8 tso.ipv6
ok 9 tso.vxlan4_ipv6
ok 10 tso.vxlan6_ipv6
ok 11 tso.vxlan_csum4_ipv6
ok 12 tso.vxlan_csum6_ipv6
# Testing with mangleid enabled
ok 13 tso.gre4_ipv6
ok 14 tso.gre6_ipv6
# Totals: pass:7 fail:0 xfail:0 xpass:0 skip:7 error:0
Note that the test currently depends on the driver reporting
the LSO count via qstat, which appears to be relatively rare
(virtio, cisco/enic, sfc/efc; but virtio needs host support).
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Looks like more and more tests want to iterate over IP version,
run the same test over ipv4 and ipv6. The current naming of
members in the env class makes it a bit awkward, we have
separate members for ipv4 and ipv6 parameters.
Store the parameters inside dicts, so that tests can easily
index them with ip version.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250218225426.77726-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already record output of ip link for NETIF in env for easy access.
Record the detailed version. TSO test will want to know the max tso size.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Find out and record in env the name of the interface which remote host
will use for the IP address provided via config.
Interface name is useful for mausezahn and for setting up tunnels.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250218225426.77726-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After this patch:
# ./tc_flower_port_range.sh
TEST: Port range matching - IPv4 UDP [ OK ]
TEST: Port range matching - IPv4 TCP [ OK ]
TEST: Port range matching - IPv6 UDP [ OK ]
TEST: Port range matching - IPv6 TCP [ OK ]
TEST: Port range matching - IPv4 UDP Drop [ OK ]
Cc: Qiang Zhang <dtzq01@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250218043210.732959-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for FIB rules that match on source and destination ports with
a mask. Test both good and bad flows.
# ./fib_rule_tests.sh
IPv6 FIB rule tests
[...]
TEST: rule6 check: sport and dport redirect to table [ OK ]
TEST: rule6 check: sport and dport no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport redirect to table [ OK ]
TEST: rule6 check: sport and dport range redirect to table [ OK ]
TEST: rule6 check: sport and dport range no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport range redirect to table [ OK ]
TEST: rule6 check: sport and dport masked redirect to table [ OK ]
TEST: rule6 check: sport and dport masked no redirect to table [ OK ]
TEST: rule6 del by pref: sport and dport masked redirect to table [ OK ]
[...]
Tests passed: 292
Tests failed: 0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, only matching on specific ports is tested. Add port range
testing to make sure this use case does not regress.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250217134109.311176-8-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The kprobe_multi feature was disabled on ARM64 due to the lack of fprobe
support.
The fprobe rewrite on function_graph has been recently merged and thus
brought support for fprobes on arm64. This then enables kprobe_multi
support on arm64, and so the corresponding tests can now be run on this
architecture.
Remove the tests depending on kprobe_multi from DENYLIST.aarch64 to
allow those to run in CI. CONFIG_FPROBE is already correctly set in
tools/testing/selftests/bpf/config
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250219-enable_kprobe_multi_tests-v1-1-faeec99240c8@bootlin.com
Two subtests use the test_in_netns() function to run the test in a
dedicated network namespace. This can now be done directly through the
test_progs framework with a test name starting with 'ns_'.
Replace the use of test_in_netns() by test_ns_* calls.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-4-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tests are serialized because they all use the loopback interface.
Replace the 'serial_test_' prefixes with 'test_ns_' to benefit from the
new test_prog feature which creates a dedicated namespace for each test,
allowing them to run in parallel.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-3-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some tests are serialized to prevent interference with others.
Open a dedicated network namespace when a test name starts with 'ns_' to
allow more test parallelization. Use the test name as namespace name to
avoid conflict between namespaces.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-2-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Next patch will add a new feature to test_prog to run tests in a
dedicated namespace if the test name starts with 'ns_'. Here the test
name already starts with 'ns_' and creates some namespaces which would
conflict with the new feature.
Rename the test to avoid this conflict.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Link: https://lore.kernel.org/r/20250219-b4-tc_links-v2-1-14504db136b7@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A test case with ridiculously deep bpf_for() nesting and
a conditional update of a stack location.
Consider the innermost loop structure:
1: bpf_for(o, 0, 10)
2: if (unlikely(bpf_get_prandom_u32()))
3: buf[0] = 42;
4: <exit>
Assuming that verifier.c:clean_live_states() operates w/o change from
the previous patch (e.g. as on current master) verification would
proceed as follows:
- at (1) state {buf[0]=?,o=drained}:
- checkpoint
- push visit to (2) for later
- at (4) {buf[0]=?,o=drained}
- pop (2) {buf[0]=?,o=active}, push visit to (3) for later
- at (1) {buf[0]=?,o=active}
- checkpoint
- push visit to (2) for later
- at (4) {buf[0]=?,o=drained}
- pop (2) {buf[0]=?,o=active}, push visit to (3) for later
- at (1) {buf[0]=?,o=active}:
- checkpoint reached, checkpoint's branch count becomes 0
- checkpoint is processed by clean_live_states() and
becomes {o=active}
- pop (3) {buf[0]=42,o=active}
- at (1), {buf[0]=42,o=active}
- checkpoint
- push visit to (2) for later
- at (4) {buf[0]=42,o=drained}
- pop (2) {buf[0]=42,o=active}, push visit to (3) for later
- at (1) {buf[0]=42,o=active}, checkpoint reached
- pop (3) {buf[0]=42,o=active}
- at (1) {buf[0]=42,o=active}:
- checkpoint reached, checkpoint's branch count becomes 0
- checkpoint is processed by clean_live_states() and
becomes {o=active}
- ...
Note how clean_live_states() converted the checkpoint
{buf[0]=42,o=active} to {o=active} and it can no longer be matched
against {buf[0]=<any>,o=active}, because iterator based states
are compared using stacksafe(... RANGE_WITHIN), that requires
stack slots to have same types. At the same time there are
still states {buf[0]=42,o=active} pushed to DFS stack.
This behaviour becomes exacerbated with multiple nesting levels,
here are veristat results:
- nesting level 1: 69 insns
- nesting level 2: 258 insns
- nesting level 3: 900 insns
- nesting level 4: 4754 insns
- nesting level 5: 35944 insns
- nesting level 6: 312558 insns
- nesting level 7: 1M limit
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-5-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A somewhat cumbersome test case sensitive to correct copying of
bpf_verifier_state->loop_entry fields in
verifier.c:copy_verifier_state().
W/o the fix from a previous commit the program is accepted as safe.
1: /* poison block */
2: if (random() != 24) { // assume false branch is placed first
3: i = iter_new();
4: while (iter_next(i));
5: iter_destroy(i);
6: return;
7: }
8:
9: /* dfs_depth block */
10: for (i = 10; i > 0; i--);
11:
12: /* main block */
13: i = iter_new(); // fp[-16]
14: b = -24; // r8
15: for (;;) {
16: if (iter_next(i))
17: break;
18: if (random() == 77) { // assume false branch is placed first
19: *(u64 *)(r10 + b) = 7; // this is not safe when b == -25
20: iter_destroy(i);
21: return;
22: }
23: if (random() == 42) { // assume false branch is placed first
24: b = -25;
25: }
26: }
27: iter_destroy(i);
The goal of this example is to:
(a) poison env->cur_state->loop_entry with a state S,
such that S->branches == 0;
(b) set state S as a loop_entry for all checkpoints in
/* main block */, thus forcing NOT_EXACT states comparisons;
(c) exploit incorrect loop_entry set for checkpoint at line 18
by first creating a checkpoint with b == -24 and then
pruning the state with b == -25 using that checkpoint.
The /* poison block */ is responsible for goal (a).
It forces verifier to first validate some unrelated iterator based
loop, which leads to an update_loop_entry() call in is_state_visited(),
which places checkpoint created at line 4 as env->cur_state->loop_entry.
Starting from line 8, the branch count for that checkpoint is 0.
The /* dfs_depth block */ is responsible for goal (b).
It abuses the fact that update_loop_entry(cur, hdr) only updates
cur->loop_entry when hdr->dfs_depth <= cur->dfs_depth.
After line 12 every state has dfs_depth bigger then dfs_depth of
poisoned env->cur_state->loop_entry. Thus the above condition is never
true for lines 12-27.
The /* main block */ is responsible for goal (c).
Verification proceeds as follows:
- checkpoint {b=-24,i=active} created at line 16;
- jump 18->23 is verified first, jump to 19 pushed to stack;
- jump 23->26 is verified first, jump to 24 pushed to stack;
- checkpoint {b=-24,i=active} created at line 15;
- current state is pruned by checkpoint created at line 16,
this sets branches count for checkpoint at line 15 to 0;
- jump to 24 is popped from stack;
- line 16 is reached in state {b=-25,i=active};
- this is pruned by a previous checkpoint {b=-24,i=active}:
- checkpoint's loop_entry is poisoned and has branch count of 0,
hence states are compared using NOT_EXACT rules;
- b is not marked precise yet.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20250215110411.3236773-3-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The tests done by test_xdp_redirect_multi.sh are now fully covered by
the CI through test_xdp_veth.c.
Remove test_xdp_redirect_multi.sh
Remove xdp_redirect_multi.c that was used by the script to load and
attach the BPF programs.
Remove their entries in the Makefile
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-6-fd0d39fca6e6@bootlin.com
XDP programs loaded on egress is tested by test_xdp_redirect_multi.sh
but not by the test_progs framework.
Add a test case in test_xdp_veth.c to test the XDP program on egress.
Use the same BPF program than test_xdp_redirect_multi.sh that replaces
the source MAC address by one provided through a BPF map.
Use a BPF program that stores the source MAC of received packets in a
map to check the test results.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-5-fd0d39fca6e6@bootlin.com
XDP redirections with BPF_F_BROADCAST and BPF_F_EXCLUDE_INGRESS flags
are tested by test_xdp_redirect_multi.sh but not within the test_progs
framework.
Add a broadcast test case in test_xdp_veth.c to test them.
Use the same BPF programs than the one used by
test_xdp_redirect_multi.sh.
Use a BPF map to select the broadcast flags.
Use a BPF map with an entry per veth to check whether packets are
received or not
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-4-fd0d39fca6e6@bootlin.com
Broadcasting flags are hardcoded for each kind for protocol.
Create a redirect_flags map that allows to select the broadcasting flags
to use in the bpf_redirect_map(). The protocol ID is used as a key.
Set the old hardcoded values as default if the map isn't filled by the
BPF caller.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-3-fd0d39fca6e6@bootlin.com
Tests use the root network namespace, so they aren't fully independent
of each other. For instance, the index of the created veth interfaces
is incremented every time a new test is launched.
Wrap the network topology in a network namespace to ensure full
isolation. Use the append_tid() helper to ensure the uniqueness of this
namespace's name during parallel runs.
Remove the use of the append_tid() on the veth names as they now belong
to an already unique namespace.
Simplify cleanup_network() by directly deleting the namespaces
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-2-fd0d39fca6e6@bootlin.com
The network configuration is defined by a table of struct
veth_configuration. This isn't convenient if we want to add a network
configuration that isn't linked to a veth pair.
Create a struct net_configuration that holds the veth_configuration
table to ease adding new configuration attributes in upcoming patch.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250212-redirect-multi-v5-1-fd0d39fca6e6@bootlin.com
Following a similar rationale as commit e4835f1da4 ("kunit: tool:
Build compile_commands.json"), make a common developer tool available by
default for KUnit users.
Compared to compile_commands.json, there is a little more work to be
done to build the GDB scripts. Is it enough to affect development cycle
duration? Unscientific evaluation:
rm -rf .kunit; time tools/testing/kunit/kunit.py build --kunitconfig ./lib/kunit/.kunitconfig --jobs 96
Without this patch it took 14.77s, with this patch it took 14.83. So,
although `make scripts_gdb` is pretty slow, presumably most of that is
just the overhead of running Kbuild at all, actually building the
scripts is approximately free.
Note also, to actually get the GDB scripts the user needs to enable
CONFIG_SCRIPTS_GDB, but building the scripts_gdb target without that is
still harmless.
Link: https://lore.kernel.org/r/20250121-kunit-gdb-v1-1-faedfd0653ef@google.com
Signed-off-by: Brendan Jackman <jackmanb@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Q is exported from Makefile.include so it is not necessary to manually
set it.
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Benjamin Tissoires <bentiss@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Eduard Zingerman <eddyz87@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lukasz Luba <lukasz.luba@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <martin.lau@linux.dev>
Cc: Mykola Lysenko <mykolal@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Song Liu <song@kernel.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20250213-quiet_tools-v3-2-07de4482a581@rivosinc.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Changes to MC remote need to be reflected in actual group memberships.
Add a test to verify that it is the case.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of inlining equivalents, use lib.sh-provided primitives.
Use defer to manage vx lifetime.
This will make it easier to extend the test in the next patch.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This helper could be useful to more than just forwarding tests.
Move it upstairs and port over to log_test_skip().
Split the function into two parts: the bit that actually checks and
reports skip, which is in a new function check_command(). And a bit
that exits the test script if the check fails. This allows users
consistent checking behavior while giving an option to bail out from
a single test without bailing out of the whole script.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Verify that for a connectible AF_VSOCK socket, merely having a transport
assigned is insufficient; socket must be connected for the sockmap to
accept.
This does not test datagram vsocks. Even though it hardly matters. VMCI is
the only transport that features VSOCK_TRANSPORT_F_DGRAM, but it has an
unimplemented vsock_transport::readskb() callback, making it unsupported by
BPF/sockmap.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 515745445e ("selftest/bpf: Add test for vsock removal from sockmap
on close()") added test that checked if proto::close() callback was invoked
on AF_VSOCK socket release. I.e. it verified that a close()d vsock does
indeed get removed from the sockmap.
It was done simply by creating a socket pair and attempting to replace a
close()d one with its peer. Since, due to a recent change, sockmap does not
allow updating index with a non-established connectible vsock, redo it with
a freshly established one.
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When testing if we should try to compact memory or drop caches before we
run the THP or HugeTLB tests we use | as an or operator. This doesn't
work since run_vmtests.sh is written in shell where this is used to pipe
the output of the first argument into the second. Instead use the shell's
-o operator.
Link: https://lkml.kernel.org/r/20250212-kselftest-mm-no-hugepages-v1-1-44702f538522@kernel.org
Fixes: b433ffa8db ("selftests: mm: perform some system cleanup before using hugepages")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Nico Pache <npache@redhat.com>
Cc: Mariano Pache <npache@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Test struct_ops programs returning referenced kptr. When the return type
of a struct_ops operator is pointer to struct, the verifier should
only allow programs that return a scalar NULL or a non-local kptr with the
correct type in its unmodified form.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250217190640.1748177-6-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test referenced kptr acquired through struct_ops argument tagged with
"__ref". The success case checks whether 1) a reference to the correct
type is acquired, and 2) the referenced kptr argument can be accessed in
multiple paths as long as it hasn't been released. In the fail cases,
we first confirm that a referenced kptr acquried through a struct_ops
argument is not allowed to be leaked. Then, we make sure this new
referenced kptr acquiring mechanism does not accidentally allow referenced
kptrs to flow into global subprograms through their arguments.
Signed-off-by: Amery Hung <amery.hung@bytedance.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20250217190640.1748177-4-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test that queues which are used for AF_XDP have the xsk nest attribute.
The attribute is currently empty, but its existence means the AF_XDP is
being used for the queue. Enable CONFIG_XDP_SOCKETS for
selftests/drivers/net tests, as well.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-4-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce tests to verify the correct functionality of the SO_RCVMARK and
SO_RCVPRIORITY socket options.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Suggested-by: Ferenc Fejes <fejes@inf.elte.hu>
Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250214205828.48503-1-annaemesenyiri@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes a grammatical error in a test log message
in reuseaddr_ports_exhausted.c for better clarity.
Signed-off-by: Pranav Tyagi <pranav.tyagi03@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250213152612.4434-1-pranav.tyagi03@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace literal 0 with macro PKEY_UNRESTRICTED where pkey_*() functions
are used in mm selftests for memory protection keys for ppc target.
Signed-off-by: Yury Khrustalev <yury.khrustalev@arm.com>
Suggested-by: Kevin Brodsky <kevin.brodsky@arm.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20250113170619.484698-4-yury.khrustalev@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Replace literal 0 with macro PKEY_UNRESTRICTED where pkey_*() functions
are used in mm selftests for memory protection keys.
Signed-off-by: Yury Khrustalev <yury.khrustalev@arm.com>
Suggested-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20250113170619.484698-3-yury.khrustalev@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Add a selftest for io_uring zero copy Rx. This test cannot run locally
and requires a remote host to be configured in net.config. The remote
host must have hardware support for zero copy Rx as listed in the
documentation page. The test will restore the NIC config back to before
the test and is idempotent.
liburing is required to compile the test and be installed on the remote
host running the test.
Signed-off-by: David Wei <dw@davidwei.uk>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20250215000947.789731-12-dw@davidwei.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge networking zerocopy receive tree, to get the prep patches for
the io_uring rx zc support.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (63 commits)
net: add helpers for setting a memory provider on an rx queue
net: page_pool: add memory provider helpers
net: prepare for non devmem TCP memory providers
net: page_pool: add a mp hook to unregister_netdevice*
net: page_pool: add callback for mp info printing
netdev: add io_uring memory provider info
net: page_pool: create hooks for custom memory providers
net: generalise net_iov chunk owners
net: prefix devmem specific helpers
net: page_pool: don't cast mp param to devmem
tools: ynl: add all headers to makefile deps
eth: fbnic: set IFF_UNICAST_FLT to avoid enabling promiscuous mode when adding unicast addrs
eth: fbnic: add MAC address TCAM to debugfs
tools: ynl-gen: support limits using definitions
tools: ynl-gen: don't output external constants
net/mlx5e: Avoid WARN_ON when configuring MQPRIO with HTB offload enabled
net/mlx5e: Remove unused mlx5e_tc_flow_action struct
net/mlx5: Remove stray semicolon in LAG port selection table creation
net/mlx5e: Support FEC settings for 200G per lane link modes
net/mlx5: Add support for 200Gbps per lane link modes
...
- Large set of fixes for vector handling, specially in the interactions
between host and guest state. This fixes a number of bugs affecting
actual deployments, and greatly simplifies the FP/SIMD/SVE handling.
Thanks to Mark Rutland for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours.
- Fix use of kernel VAs at EL2 when emulating timers with nVHE.
- Small set of pKVM improvements and cleanups.
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module infrastructure
cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being emulated
by KVM to fix a NULL pointer dereference.
- Enter guest mode (L2) from KVM's perspective before initializing the vCPU's
nested NPT MMU so that the MMU is properly tagged for L2, not L1.
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as the
guest's value may be stale if a VM-Exit is handled in the fastpath.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmev2ykUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMvxwf/bw2u08moAYWAjJLROFvfiKXnznLS
iqJ2+jcw0lJ7wDqm4Zw8M5t74Rd+y5yzkLkZOyjav9yBB09zRkItiTHljCNMOQnt
2QptBa3CUN8N+rNnvVRt6dMkhw7z6n7eoFRSIDY2Y9PgiTapbFXPV1gFkMPO6+0f
SyF4LCr0iuDkJdvGAZJAH/Mp8nG6dv/A6a+Q+R1RkbKn9c2OdWw4VMfhIzimFGN6
0RFjbfXXvyO0aU/W/VHwvvuhcjGkAZWfHDdaTXqbvSMhayW562UPVMVBwXdVBmDj
Dk1gCKcbm4WyktbXYW6iOYj3MgdK96eI24ozps4R0aDexsrTRY4IfH4KEg==
=20Ql
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Large set of fixes for vector handling, especially in the
interactions between host and guest state.
This fixes a number of bugs affecting actual deployments, and
greatly simplifies the FP/SIMD/SVE handling. Thanks to Mark Rutland
for dealing with this thankless task.
- Fix an ugly race between vcpu and vgic creation/init, resulting in
unexpected behaviours
- Fix use of kernel VAs at EL2 when emulating timers with nVHE
- Small set of pKVM improvements and cleanups
x86:
- Fix broken SNP support with KVM module built-in, ensuring the PSP
module is initialized before KVM even when the module
infrastructure cannot be used to order initcalls
- Reject Hyper-V SEND_IPI hypercalls if the local APIC isn't being
emulated by KVM to fix a NULL pointer dereference
- Enter guest mode (L2) from KVM's perspective before initializing
the vCPU's nested NPT MMU so that the MMU is properly tagged for
L2, not L1
- Load the guest's DR6 outside of the innermost .vcpu_run() loop, as
the guest's value may be stale if a VM-Exit is handled in the
fastpath"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
x86/sev: Fix broken SNP support with KVM module built-in
KVM: SVM: Ensure PSP module is initialized if KVM module is built-in
crypto: ccp: Add external API interface for PSP module initialization
KVM: arm64: vgic: Hoist SGI/PPI alloc from vgic_init() to kvm_create_vgic()
KVM: arm64: timer: Drop warning on failed interrupt signalling
KVM: arm64: Fix alignment of kvm_hyp_memcache allocations
KVM: arm64: Convert timer offset VA when accessed in HYP code
KVM: arm64: Simplify warning in kvm_arch_vcpu_load_fp()
KVM: arm64: Eagerly switch ZCR_EL{1,2}
KVM: arm64: Mark some header functions as inline
KVM: arm64: Refactor exit handlers
KVM: arm64: Refactor CPTR trap deactivation
KVM: arm64: Remove VHE host restore of CPACR_EL1.SMEN
KVM: arm64: Remove VHE host restore of CPACR_EL1.ZEN
KVM: arm64: Remove host FPSIMD saving for non-protected KVM
KVM: arm64: Unconditionally save+flush host FPSIMD/SVE/SME state
KVM: x86: Load DR6 with guest value only before entering .vcpu_run() loop
KVM: nSVM: Enter guest mode before initializing nested NPT MMU
KVM: selftests: Add CPUID tests for Hyper-V features that need in-kernel APIC
KVM: selftests: Manage CPUID array in Hyper-V CPUID test's core helper
...
The driver for the 8250 console is not used, as no port is found.
Instead the prom0 bootconsole is used the whole time.
The prom driver translates '\n' to '\r\n' before handing of the message
off to the firmware. The firmware performs the same translation again.
In the final output produced by QEMU each line ends with '\r\r\n'.
This breaks the kunit parser, which can only handle '\r\n' and '\n'.
Use the Zilog console instead. It works correctly, is the one documented
by the QEMU manual and also saves a bit of codesize:
Before=4051011, After=4023326, chg -0.68%
Observed on QEMU 9.2.0.
Link: https://lore.kernel.org/r/20250214-kunit-qemu-sparc-console-v1-1-ba1dfdf8f0b1@linutronix.de
Fixes: 87c9c16317 ("kunit: tool: add support for QEMU")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
kernfs_rename_lock is used to obtain stable kernfs_node::{name|parent}
pointer. This is a preparation to access kernfs_node::parent under RCU
and ensure that the pointer remains stable under the RCU lifetime
guarantees.
For a complete path, as it is done in kernfs_path_from_node(), the
kernfs_rename_lock is still required in order to obtain a stable parent
relationship while computing the relevant node depth. This must not
change while the nodes are inspected in order to build the path.
If the kernfs user never moves the nodes (changes the parent) then the
kernfs_rename_lock is not required and the RCU guarantees are
sufficient. This "restriction" can be set with
KERNFS_ROOT_INVARIANT_PARENT. Otherwise the lock is required.
Rename kernfs_node::parent to kernfs_node::__parent to denote the RCU
access and use RCU accessor while accessing the node.
Make cgroup use KERNFS_ROOT_INVARIANT_PARENT since the parent here can
not change.
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20250213145023.2820193-6-bigeasy@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a simple repro for the issue of miscalculating LDX/STX/ST CO-RE
relocation size adjustment when the CO-RE relocation target type is an
ARRAY.
We need to make sure that compiler generates LDX/STX/ST instruction with
CO-RE relocation against entire ARRAY type, not ARRAY's element. With
the code pattern in selftest, we get this:
59: 61 71 00 00 00 00 00 00 w1 = *(u32 *)(r7 + 0x0)
00000000000001d8: CO-RE <byte_off> [5] struct core_reloc_arrays::a (0:0)
Where offset of `int a[5]` is embedded (through CO-RE relocation) into memory
load instruction itself.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250207014809.1573841-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Added test cases to ensure that programs with stack sizes exceeding 512
bytes are restricted in non-JITed mode, and can be executed normally in
JITed mode, even with stack sizes exceeding 512 bytes due to the presence
of may_goto instructions.
Test result:
echo "0" > /proc/sys/net/core/bpf_jit_enable
./test_progs -t verifier_stack_ptr
...
stack size 512 with may_goto with jit:SKIP
stack size 512 with may_goto without jit:OK
...
Summary: 1/27 PASSED, 25 SKIPPED, 0 FAILED
echo "1" > /proc/sys/net/core/bpf_jit_enable
./test_progs -t verifier_stack_ptr
...
stack size 512 with may_goto with jit:OK
stack size 512 with may_goto without jit:SKIP
...
Summary: 1/27 PASSED, 25 SKIPPED, 0 FAILED
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20250214091823.46042-4-mrpre@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In some cases, the verification logic under the interpreter and JIT
differs, such as may_goto, and the test program behaves differently under
different runtime modes, requiring separate verification logic for each
result.
Introduce __load_if_JITed and __load_if_no_JITed annotation for tests.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Link: https://lore.kernel.org/r/20250214091823.46042-3-mrpre@163.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When working on OpenRISC support for restartable sequences I noticed
and fixed these two issues with the riscv support bits.
1 The 'inc' argument to RSEQ_ASM_OP_R_DEREF_ADDV was being implicitly
passed to the macro. Fix this by adding 'inc' to the list of macro
arguments.
2 The inline asm input constraints for 'inc' and 'off' use "er", The
riscv gcc port does not have an "e" constraint, this looks to be
copied from the x86 port. Fix this by just using an "r" constraint.
I have compile tested this only for riscv. However, the same fixes I
use in the OpenRISC rseq selftests and everything passes with no issues.
Fixes: 171586a6ab ("selftests/rseq: riscv: Template memory ordering and percpu access mode")
Signed-off-by: Stafford Horne <shorne@gmail.com>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250114170721.3613280-1-shorne@gmail.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
- Fix lock imbalance in a corner case of dispatch_to_local_dsq().
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically.
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly disallowing
kfuncs that require the task argument to be the rq operation is currently
operating on and thus is rq-locked. Allow them.
- Fix autogroup migration handling bug which was occasionally triggering a
warning in the cgroup migration path.
- tools/sched_ext, selftest and other misc updates.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ695uA4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGeCfAQDmUixMNJCIrRphYsWcYUzlGLZyyRpQEEYFtRMO
UC266gD+PUV2UvuO5sAVH8HVnGdOqkXaE/IRG+TC7fQH3ruPlgI=
=LFd1
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix lock imbalance in a corner case of dispatch_to_local_dsq()
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly
disallowing kfuncs that require the task argument to be the rq
operation is currently operating on and thus is rq-locked.
Allow them.
- Fix autogroup migration handling bug which was occasionally
triggering a warning in the cgroup migration path
- tools/sched_ext, selftest and other misc updates
* tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
sched_ext: selftests: Fix grammar in tests description
sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq()
sched_ext: Fix migration disabled handling in targeted dispatches
sched_ext: Implement auto local dispatching of migration disabled tasks
sched_ext: Fix incorrect time delta calculation in time_delta()
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
tools/sched_ext: Add helper to check task migration state
sched_ext: Fix incorrect autogroup migration detection
sched_ext: selftests/dsp_local_on: Fix sporadic failures
selftests/sched_ext: Fix enum resolution
sched_ext: Include task weight in the error state dump
sched_ext: Fixes typos in comments
- Fix a race window where a newly forked task could escape cgroup.kill.
- Remove incorrectly included steal time from cpu.stat::usage_usec.
- Minor update in selftest.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZ6928A4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGYrbAPsEtoH5GFw7VtKIy4fS23QbtxUuwW0fERrPWGyt
JtQv3gD5AboBUrGWdgiM5c2bIXT3f+Bn9w3HhLiPaB8ieN/0kA8=
=3BBH
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
Now that the binary stats cache infrastructure is largely scope agnostic,
add support for vCPU-scoped stats. Like VM stats, open and cache the
stats FD when the vCPU is created so that it's guaranteed to be valid when
vcpu_get_stats() is invoked.
Account for the extra per-vCPU file descriptor in kvm_set_files_rlimit(),
so that tests that create large VMs don't run afoul of resource limits.
To sanity check that the infrastructure actually works, and to get a bit
of bonus coverage, add an assert in x86's xapic_ipi_test to verify that
the number of HLTs executed by the test matches the number of HLT exits
observed by KVM.
Tested-by: Manali Shukla <Manali.Shukla@amd.com>
Link: https://lore.kernel.org/r/20250111005049.1247555-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Move the max vCPUs test's RLIMIT_NOFILE adjustments to common code, and
use the new helper to adjust the resource limit for non-barebones VMs by
default. x86's recalc_apic_map_test creates 512 vCPUs, and a future
change will open the binary stats fd for all vCPUs, which will put the
recalc APIC test above some distros' default limit of 1024.
Link: https://lore.kernel.org/r/20250111005049.1247555-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Get and cache a VM's binary stats FD when the VM is opened, as opposed to
waiting until the stats are first used. Opening the stats FD outside of
__vm_get_stat() will allow converting it to a scope-agnostic helper.
Note, this doesn't interfere with kvm_binary_stats_test's testcase that
verifies a stats FD can be used after its own VM's FD is closed, as the
cached FD is also closed during kvm_vm_free().
Link: https://lore.kernel.org/r/20250111005049.1247555-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a struct and helpers to manage the binary stats cache, which is
currently used only for VM-scoped stats. This will allow expanding the
selftests infrastructure to provide support for vCPU-scoped binary stats,
which, except for the ioctl to get the stats FD are identical to VM-scoped
stats.
Defer converting __vm_get_stat() to a scope-agnostic helper to a future
patch, as getting the stats FD from KVM needs to be moved elsewhere
before it can be made completely scope-agnostic.
Link: https://lore.kernel.org/r/20250111005049.1247555-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Turn vm_get_stat() into a macro that generates a string for the stat name,
as opposed to taking a string. This will allow hardening stat usage in
the future to generate errors on unknown stats at compile time.
No functional change intended.
Link: https://lore.kernel.org/r/20250111005049.1247555-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Fail the test if it attempts to read a stat that doesn't exist, e.g. due
to a typo (hooray, strings), or because the test tried to get a stat for
the wrong scope. As is, there's no indiciation of failure and @data is
left untouched, e.g. holds '0' or random stack data in most cases.
Fixes: 8448ec5993 ("KVM: selftests: Add NX huge pages test")
Link: https://lore.kernel.org/r/20250111005049.1247555-4-seanjc@google.com
[sean: fixup spelling mistake, courtesy of Colin Ian King]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Building the test creates binaries 'wait-pipe' and
'sandbox-and-launch' which need to be gitignore'd.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Link: https://lore.kernel.org/r/20250210161101.6024-1-bharadwaj.raju777@gmail.com
[mic: Sort entries]
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Extend protocol_variant structure with protocol field (Cf. socket(2)).
Extend protocol fixture with TCP test suits with protocol=IPPROTO_TCP
which can be used as an alias for IPPROTO_IP (=0) in socket(2).
Signed-off-by: Mikhail Ivanov <ivanov.mikhail1@huawei-partners.com>
Link: https://lore.kernel.org/r/20250205093651.1424339-3-ivanov.mikhail1@huawei-partners.com
Cc: <stable@vger.kernel.org> # 6.7.x
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Since commit 5155cbcdbf ("af_unix: Add a prompt to
CONFIG_AF_UNIX_OOB"), the Landlock selftests's configuration is not
enough to build a minimal kernel. Because scoped_signal_test checks
with the MSG_OOB flag, we need to enable CONFIG_AF_UNIX_OOB for tests:
# RUN fown.no_sandbox.sigurg_socket ...
# scoped_signal_test.c:420:sigurg_socket:Expected 1 (1) == send(client_socket, ".", 1, MSG_OOB) (-1)
# sigurg_socket: Test terminated by assertion
# FAIL fown.no_sandbox.sigurg_socket
...
Cc: Günther Noack <gnoack@google.com>
Acked-by: Florent Revest <revest@chromium.org>
Link: https://lore.kernel.org/r/20250211132531.1625566-1-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Two sets of tests are added to exercise the not _locked and _locked
version of the kfuncs. For both tests, user space accesses xattr
security.bpf.foo on a testfile. The BPF program is triggered by user
space access (on LSM hook inode_[set|get]_xattr) and sets or removes
xattr security.bpf.bar. Then user space then validates that xattr
security.bpf.bar is set or removed as expected.
Note that, in both tests, the BPF programs use the not _locked kfuncs.
The verifier picks the proper kfuncs based on the calling context.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250130213549.3353349-6-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Extend test_progs fs_kfuncs to cover different xattr names. Specifically:
xattr name "user.kfuncs" and "security.bpf.xxx" can be read from BPF
program with kfuncs bpf_get_[file|dentry]_xattr(); while "security.bpf"
and "security.selinux" cannot be read.
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250130213549.3353349-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Fix a race condition between the main test_progs thread and the traffic
monitoring thread. The traffic monitor thread tries to print a line
using multiple printf and use flockfile() to prevent the line from being
torn apart. Meanwhile, the main thread doing io redirection can reassign
or close stdout when going through tests. A deadlock as shown below can
happen.
main traffic_monitor_thread
==== ======================
show_transport()
-> flockfile(stdout)
stdio_hijack_init()
-> stdout = open_memstream(log_buf, log_cnt);
...
env.subtest_state->stdout_saved = stdout;
...
funlockfile(stdout)
stdio_restore_cleanup()
-> fclose(env.subtest_state->stdout_saved);
After the traffic monitor thread lock stdout, A new memstream can be
assigned to stdout by the main thread. Therefore, the traffic monitor
thread later will not be able to unlock the original stdout. As the
main thread tries to access the old stdout, it will hang indefinitely
as it is still locked by the traffic monitor thread.
The deadlock can be reproduced by running test_progs repeatedly with
traffic monitor enabled:
for ((i=1;i<=100;i++)); do
./test_progs -a flow_dissector_skb* -m '*'
done
Fix this by only calling printf once and remove flockfile()/funlockfile().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250213233217.553258-1-ameryhung@gmail.com
Kalle Valo steps down after serving as the WiFi driver maintainer
for over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth: stmmac: correct Rx buffer layout when SPH is enabled
- rxrpc: fix alteration of headers whilst zerocopy pending
- eth: iavf: fix a locking bug in an error path
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364 firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags,
changes the uAPI but this uAPI was not in any release yet
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=7lE+
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
Explicitly close() a TCP_ESTABLISHED (connectible) socket with SO_LINGER
enabled.
As for now, test does not verify if close() actually lingers.
On an unpatched machine, may trigger a null pointer dereference.
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250210-vsock-linger-nullderef-v3-2-ef6244d02b54@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extract a private header and convert the prime_numbers self-test to a
KUnit test. I considered parameterizing the test using
`KUNIT_CASE_PARAM` but didn't see how it was possible since the test
logic is entangled with the test parameter generation logic.
Signed-off-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/20250208-prime_numbers-kunit-convert-v5-2-b0cb82ae7c7d@gmail.com
Signed-off-by: Kees Cook <kees@kernel.org>
Close/free a VM's binary stats cache when the VM is released, not when the
VM is fully freed. When a VM is re-created, e.g. for state save/restore
tests, the stats FD and descriptor points at the old, defunct VM. The FD
is still valid, in that the underlying stats file won't be freed until the
FD is closed, but reading stats will always pull information from the old
VM.
Note, this is a benign bug in the current code base as none of the tests
that recreate VMs use binary stats.
Fixes: 83f6e109f5 ("KVM: selftests: Cache binary stats metadata for duration of test")
Link: https://lore.kernel.org/r/20250111005049.1247555-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When allocating and freeing a VM's cached binary stats info, check for a
NULL descriptor, not a '0' file descriptor, as '0' is a legal FD. E.g. in
the unlikely scenario the kernel installs the stats FD at entry '0',
selftests would reallocate on the next __vm_get_stat() and/or fail to free
the stats in kvm_vm_free().
Fixes: 83f6e109f5 ("KVM: selftests: Cache binary stats metadata for duration of test")
Link: https://lore.kernel.org/r/20250111005049.1247555-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that dirty_log_test doesn't require running multiple iterations to
verify dirty pages, and actually runs the requested number of iterations,
drop the requirement that the test run at least "3" (which was really "2"
at the time the test was written) iterations.
Link: https://lore.kernel.org/r/20250111003004.1235645-21-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Actually run all requested iterations, instead of iterations-1 (the count
starts at '1' due to the need to avoid '0' as an in-memory value for a
dirty page).
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-20-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Set the per-iteration variables at the start of each iteration instead of
setting them before the loop, and at the end of each iteration. To ensure
the vCPU doesn't race ahead before the first iteration, simply have the
vCPU worker want for sem_vcpu_cont, which conveniently avoids the need to
special case posting sem_vcpu_cont from the loop.
Link: https://lore.kernel.org/r/20250111003004.1235645-19-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that each iteration collects all dirty entries and ensures the guest
*completes* at least one write, tighten the exemptions for the last dirty
page of the previous iteration. Specifically, the only legal value (other
than the current iteration) is N-1.
Unlike the last page for the current iteration, the in-progress write from
the previous iteration is guaranteed to have completed, otherwise the test
would have hung.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Ensure the vCPU fully completes at least one write in each dirty_log_test
iteration, as failure to dirty any pages complicates verification and
forces the test to be overly conservative about possible values. E.g.
verification needs to allow the last dirty page from a previous iteration
to have *any* value, because the vCPU could get stuck for multiple
iterations, which is unlikely but can happen in heavily overloaded and/or
nested virtualization setups.
Somewhat arbitrarily set the minimum to 0x100/256; high enough to be
interesting, but not so high as to lead to pointlessly long runtimes.
Opportunistically report the number of writes per iteration for debug
purposes, and so that a human can sanity check the test. Due to each
write targeting a random page, the number of dirty pages will likely be
lower than the number of total writes, but it shouldn't be absurdly lower
(which would suggest the pRNG is broken)
Reported-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a sanity check that a completely garbage value wasn't written to
the last dirty page in the ring, e.g. that it doesn't contain the *next*
iteration's value.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Collect all dirty entries during each iteration of dirty_log_test by
doing a final collection after the vCPU has been stopped. To deal with
KVM's destructive approach to getting the dirty bitmaps, use a second
bitmap for the post-stop collection.
Collecting all entries that were dirtied during an iteration simplifies
the verification logic *and* improves test coverage.
- If a page is written during iteration X, but not seen as dirty until
X+1, the test can get a false pass if the page is also written during
X+1.
- If a dirty page used a stale value from a previous iteration, the test
would grant a false pass.
- If a missed dirty log occurs in the last iteration, the test would fail
to detect the issue.
E.g. modifying mark_page_dirty_in_slot() to dirty an unwritten gfn:
if (memslot && kvm_slot_dirty_track_enabled(memslot)) {
unsigned long rel_gfn = gfn - memslot->base_gfn;
u32 slot = (memslot->as_id << 16) | memslot->id;
if (!vcpu->extra_dirty &&
gfn_to_memslot(kvm, gfn + 1) == memslot) {
vcpu->extra_dirty = true;
mark_page_dirty_in_slot(kvm, memslot, gfn + 1);
}
if (kvm->dirty_ring_size && vcpu)
kvm_dirty_ring_push(vcpu, slot, rel_gfn);
else if (memslot->dirty_bitmap)
set_bit_le(rel_gfn, memslot->dirty_bitmap);
}
isn't detected with the current approach, even with an interval of 1ms
(when running nested in a VM; bare metal would be even *less* likely to
detect the bug due to the vCPU being able to dirty more memory). Whereas
collecting all dirty entries consistently detects failures with an
interval of 700ms or more (the longer interval means a higher probability
of an actual write to the prematurely-dirtied page).
Link: https://lore.kernel.org/r/20250111003004.1235645-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Print out the last dirty pages from the current and previous iteration on
verification failures. In many cases, bugs (especially test bugs) occur
on the edges, i.e. on or near the last pages, and being able to correlate
failures with the last pages can aid in debug.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When verifying pages in dirty_log_test, immediately continue on all "pass"
scenarios to make the logic consistent in how it handles pass vs. fail.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
When running dirty_log_test using the dirty ring, post to sem_vcpu_stop
only when the main thread has explicitly requested that the vCPU stop.
Synchronizing the vCPU and main thread whenever the dirty ring happens to
be full is unnecessary, as KVM's ABI is to actively prevent the vCPU from
running until the ring is no longer full. I.e. attempting to run the vCPU
will simply result in KVM_EXIT_DIRTY_RING_FULL without ever entering the
guest. And if KVM doesn't exit, e.g. let's the vCPU dirty more pages,
then that's a KVM bug worth finding.
Posting to sem_vcpu_stop on ring full also makes it difficult to get the
test logic right, e.g. it's easy to let the vCPU keep running when it
shouldn't, as a ring full can essentially happen at any given time.
Opportunistically rework the handling of dirty_ring_vcpu_ring_full to
leave it set for the remainder of the iteration in order to simplify the
surrounding logic.
Link: https://lore.kernel.org/r/20250111003004.1235645-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In the dirty_log_test guest code, exit to userspace only when the vCPU is
explicitly told to stop. Periodically exiting just to check if a flag has
been set is unnecessary, weirdly complex, and wastes time handling exits
that could be used to dirty memory.
Opportunistically convert 'i' to a uint64_t to guard against the unlikely
scenario that guest_num_pages exceeds the storage of an int.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that the vCPU doesn't dirty every page on the first iteration for
architectures that support the dirty ring, honor vcpu_stop in the dirty
ring's vCPU worker, i.e. stop when the main thread says "stop". This will
allow plumbing vcpu_stop into the guest so that the vCPU doesn't need to
periodically exit to userspace just to see if it should stop.
Add a comment explaining that marking all pages as dirty is problematic
for the dirty ring, as it results in the guest getting stuck on "ring
full". This could be addressed by adding a GUEST_SYNC() in that initial
loop, but it's not clear how that would interact with s390's behavior.
Link: https://lore.kernel.org/r/20250111003004.1235645-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
s390 specific workaround causes the dirty-log mode of the test to dirty
all guest memory on the first iteration, which is very slow when the test
is run in a nested VM.
Limit this workaround to s390x.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Continue collecting entries from the dirty ring for the entire time the
vCPU is running. Collecting exactly once all but guarantees the vCPU will
encounter a "ring full" event and stop. While testing ring full is
interesting, stopping and doing nothing is not, especially for larger
intervals as the test effectively does nothing for a much longer time.
To balance continuous collection with letting the guest make forward
progress, chunk the interval waiting into 1ms loops (which also makes
the math dead simple).
To maintain coverage for "ring full", collect entries on subsequent
iterations if and only if the ring has been filled at least once. I.e.
let the ring fill up (if the interval allows), but after that contiuously
empty it so that the vCPU can keep running.
Opportunistically drop unnecessary zero-initialization of "count".
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Cache the page's value during verification in a local variable, re-reading
from the pointer is ugly and error prone, e.g. allows for bugs like
checking the pointer itself instead of the value.
No functional change intended.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Track and print the number of dirty and clear pages for each iteration.
This provides parity between all log modes, and will allow collecting the
dirty ring multiple times per iteration without spamming the console.
Opportunistically drop the "Dirtied N pages" print, which is redundant
and wrong. For the dirty ring testcase, the vCPU isn't guaranteed to
complete a loop. And when the vCPU does complete a loot, there are no
guarantees that it has *dirtied* that many pages; because the writes are
to random address, the vCPU may have written the same page over and over,
i.e. only dirtied one page.
While the number of writes performed by the vCPU is also interesting,
e.g. the pr_info() could be tweaked to use different verbiage, pages_count
doesn't correctly track the number of writes either (because loops aren't
guaranteed to a complete). Delete the print for now, as a future patch
will precisely track the number of writes, at which point the verification
phase can report the number of writes performed by each iteration.
Link: https://lore.kernel.org/r/20250111003004.1235645-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop an srandom() initialization that was leftover from the conversion to
use selftests' guest_random_xxx() APIs.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the signal/kick from dirty_log_test's dirty ring handling, as kicking
the vCPU adds marginal value, at the cost of adding significant complexity
to the test.
Asynchronously interrupting the vCPU isn't novel; unless the kernel is
fully tickless, the vCPU will be interrupted by IRQs for any decently
large interval.
And exiting to userspace mode in the middle of a sequence isn't novel
either, as the vCPU will do so every time the ring becomes full.
Link: https://lore.kernel.org/r/20250111003004.1235645-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Sync the new iteration to the guest prior to restarting the vCPU, otherwise
it's possible for the vCPU to dirty memory for the next iteration using the
current iteration's value.
Note, because the guest can be interrupted between the vCPU's load of the
iteration and its write to memory, it's still possible for the guest to
store the previous iteration to memory as the previous iteration may be
cached in a CPU register (which the test accounts for).
Note #2, the test's current approach of collecting dirty entries *before*
stopping the vCPU also results dirty memory having the previous iteration.
E.g. if page is dirtied in the previous iteration, but not the current
iteration, the verification phase will observe the previous iteration's
value in memory. That wart will be remedied in the near future, at which
point synchronizing the iteration before restarting the vCPU will guarantee
the only way for verification to observe stale iterations is due to the
CPU register caching case, or due to a dirty entry being collected before
the store retires.
Link: https://lore.kernel.org/r/20250111003004.1235645-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
If dirty_log_test is run nested, it is possible for entries in the emulated
PML log to appear before the actual memory write is committed to the RAM,
due to the way KVM retries memory writes as a response to a MMU fault.
In addition to that in some very rare cases retry can happen more than
once, which will lead to the test failure because once the write is
finally committed it may have a very outdated iteration value.
Detect and avoid this case.
Cc: Peter Xu <peterx@redhat.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20250111003004.1235645-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use KVM_ASM_SAFE_FEP, not simply KVM_ASM_SAFE, for kvm_asm_safe_fep(), as
the non-FEP version doesn't force emulation (stating the obvious). Note,
there are currently no users of kvm_asm_safe_fep().
Fixes: ab3b6a7de8 ("KVM: selftests: Add a forced emulation variation of KVM_ASM_SAFE()")
Link: https://lore.kernel.org/r/20250130163135.270770-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add testcases to x86's Hyper-V CPUID test to verify that KVM advertises
support for features that require an in-kernel local APIC appropriately,
i.e. that KVM hides support from the vCPU-scoped ioctl if the VM doesn't
have an in-kernel local APIC.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Allocate, get, and free the CPUID array in the Hyper-V CPUID test in the
test's core helper, instead of copy+pasting code at each call site. In
addition to deduplicating a small amount of code, restricting visibility
of the array to a single invocation of the core test prevents "leaking" an
array across test cases. Passing in @vcpu to the helper will also allow
pivoting on VM-scoped information without needing to pass more booleans,
e.g. to conditionally assert on features that require an in-kernel APIC.
To avoid use-after-free bugs due to overzealous and careless developers,
opportunstically add a comment to explain that the system-scoped helper
caches the Hyper-V CPUID entries, i.e. that the caller is not responsible
for freeing the memory.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Make the Hyper-V CPUID test's local helper test_hv_cpuid_e2big() static,
it's not used outside of the test (and isn't intended to be).
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Print out the expected vs. actual count of the Top-Down Slots event on
failure in the Intel PMU counters test. GUEST_ASSERT() only expands
constants/macros, i.e. only prints the value of the expected count, which
makes it difficult to debug and triage failures.
Link: https://lore.kernel.org/r/20250117234204.2600624-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that validation of event count is tied to hardware support for event,
and not to guest support for an event, drop the unused "event" parameter
from the various helpers.
No functional change intended.
Link: https://lore.kernel.org/r/20250117234204.2600624-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the local "nr_arch_events" in the Intel PMU counters test as the test
asserts that "nr_arch_events <= NR_INTEL_ARCH_EVENTS", and then sets
nr_arch_events to the max of the two. I.e. nr_arch_events is guaranteed
to be NR_INTEL_ARCH_EVENTS for the meat of the test, just use
NR_INTEL_ARCH_EVENTS directly.
No functional change intended.
Link: https://lore.kernel.org/r/20250117234204.2600624-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
In the Intel PMU counters test, only validate the counts for architectural
events that are supported in hardware. If an arch event isn't supported,
the event selector may enable a completely different event, and thus the
logic for the expected count is bogus.
This fixes test failures on pre-Icelake systems due to the encoding for
the architectural Top-Down Slots event corresponding to something else
(at least on the Skylake family of CPUs).
Note, validation relies on *hardware* support, not KVM support and not
guest support. Architectural events are all about enumerating the event
selector encoding; lack of enumeration for an architectural event doesn't
mean the event itself is unsupported, i.e. the event should still count as
expected even if KVM and/or guest CPUID doesn't enumerate the event as
being "architectural".
Note #2, it's desirable to _program_ the architectural event encoding even
if hardware doesn't support the event. The count can't be validated when
the event is fully enabled, but KVM should still let the guest program the
event selector, and the PMC shouldn't count if the event is disabled.
Fixes: 4f1bd6b160 ("KVM: selftests: Test Intel PMU architectural events on gp counters")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202501141009.30c629b4-lkp@intel.com
Debugged-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Link: https://lore.kernel.org/r/20250117234204.2600624-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Wrap PMU counter test's array of Intel architectrual in a helper function
so that the events can be queried in multiple locations. Add a comment to
explain the need for a wrapper.
No functional change intended.
Link: https://lore.kernel.org/r/20250117234204.2600624-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
On powerpc, a CPU does not necessarily originate from NUMA node 0.
This contrasts with architectures like x86, where CPU 0 is not
hot-pluggable, making NUMA node 0 a consistently valid node.
This discrepancy can lead to failures when creating a map on NUMA
node 0, which is initialized by default, if no CPUs are allocated
from NUMA node 0.
This patch fixes the issue by setting NUMA_NO_NODE (-1) for map
creation for this selftest.
Fixes: 96eabe7a40 ("bpf: Allow selecting numa node during map creation")
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/cf1f61468b47425ecf3728689bc9636ddd1d910e.1738302337.git.skb99@linux.ibm.com
Since commit 7e92e01b72 ("powerpc: Provide syscall wrapper")
landed in v6.1, syscall wrapper is enabled on powerpc. Commit
9474689020 ("powerpc: Don't add __powerpc_ prefix to syscall
entry points") , that drops the prefix to syscall entry points,
also landed in the same release. So, add the missing empty
SYS_PREFIX prefix definition for powerpc, to fix some fentry
and kprobe selftests.
Signed-off-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/7192d6aa9501115dc242435970df82b3d190f257.1738302337.git.skb99@linux.ibm.com
This change introduces a new selftest case to verify the functionality
of dumping IPv4 multicast addresses using the RTM_GETMULTICAST netlink
message. The test utilizes the ynl library to interact with the
netlink interface and validate that the kernel correctly reports the
joined IPv4 multicast addresses.
To run the test, execute the following command:
$ vng -v --user root --cpus 16 -- \
make -C tools/testing/selftests TARGETS=net \
TEST_PROGS=rtnetlink.py TEST_GEN_PROGS="" run_tests
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Yuyang Huang <yuyanghuang@google.com>
Link: https://patch.msgid.link/20250207110836.2407224-2-yuyanghuang@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
auxv_generic_compat_pmu() utility function is to detect whether the
system is having generic compat PMU. The check is based on base platform
value from /proc/self/auxv. Update the comment with details on how auxv
is used to detect the platform.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250113075858.45137-5-atrajeev@linux.vnet.ibm.com
The testcase uses check_extended_regs_support and
perf_get_platform_reg_mask function to check if the
platform has extended reg support. This will help to
check if sampling pmu selftest is enabled or not for
a given platform.
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250113075858.45137-4-atrajeev@linux.vnet.ibm.com
Some of the tests depends on pvr value to choose
the event. Example:
- event_alternatives_tests_p10: alternative event depends
on registered PMU driver which is based on pvr
- generic_events_valid_test varies based on platform
- bhrb_filter_map_test: again its dependent on pmu to
decide which bhrb filter to use
- reserved_bits_mmcra_sample_elig_mode: randome sampling
mode reserved bits is also varies based on platform
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250113075858.45137-2-atrajeev@linux.vnet.ibm.com
Add check for power11 pvr in the selftest utility
functions. Selftests uses pvr value to check for platform
support inorder to run the tests. pvr is also used to
send the extended mask value to capture sampling registers.
Update some of the utility functions to use hwcap2 inorder
to return platform specific bits from sampling registers.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250113075858.45137-1-atrajeev@linux.vnet.ibm.com
Refering to C binaries from Python code is going to be a common
need. Add a helper to convert from path in relation to the test.
Meaning, if the test is in the same directory as the binary, the
call would be simply: cfg.rpath("binary").
The helper name "rpath" is not great. I can't think of a better
name that would be accurate yet concise.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We have separate Env classes for local tests and tests with a remote
endpoint. Make it easier to share the code by creating a base class.
Make env loading a method of this class.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20250207184140.1730466-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ncdevmem doesn't need libmnl, remove the unnecessary include.
Since YNL doesn't depend on libmnl either, any more, it's actually
possible to build selftests without having libmnl installed.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250207183119.1721424-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since headers don't always follow the selftests around correct, explicitly
include the __NR_uretprobe syscall for better test coverage.
Signed-off-by: Kees Cook <kees@kernel.org>
There's no good API to check how many contexts device supports.
But initial tests sense the context count already, so just store
that number and skip tests which we know need more.
Link: https://patch.msgid.link/20250206235334.1425329-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check that adding Rx flow steering rules pointing to an RSS
context which does not exist is prevented.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250206235334.1425329-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new selftest to verify that the netconsole module correctly
handles CPU runtime data in sysdata. The test validates three scenarios:
1. Basic CPU sysdata functionality - verifies that cpu=X is appended to
messages
2. CPU sysdata with userdata - ensures CPU data works alongside userdata
3. Disabled CPU sysdata - confirms no CPU data is included when disabled
The test uses taskset to control which CPU sends messages and verifies
the reported CPU matches the one used. This helps ensure that netconsole
accurately tracks and reports the originating CPU of messages.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
* Propagate ownership of debug registers in protected mode after
the rework that landed in 6.14-rc1
* Stop pretending that we can run the protected mode without a GICv3
being present on the host
* Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
* Always evaluate the need to arm a background timer for fully emulated
guest timers
* Fix the emulation of EL1 timers in the absence of FEAT_ECV
* Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
* move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code. As an initial set of cleanups, move
some code from mm/gmap into kvm and start using __kvm_faultin_pfn()
to fault-in pages as needed; but especially stop abusing page->index
and page->lru to aid in the pgdesc conversion.
x86:
* Add missing check in the fix to defer starting the huge page recovery
vhost_task
* SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmemTnEUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP97gf/Rew+yEsRrHVk/j0R2XwFx51raYZy
eaicv07jYmwsnaALq6BEj4xxDW8dJEJgj05Czm1o9+9x8nvY2+UjT2q4J8fY9xdD
Yr+5GvEEz4x2GNL3ZYE3iHTNFQckNxOgMilLW3br1E+wjusShKmgGxPYTRyClQ34
gDBZQWzOG22UNC6PbW9dgTK54b57+NJdIZYuHz4LkMsTvzf6jXo5VumsgbbZqC4e
VGh5EUEPL7+cNzGY/+WURXI6OojdPzbneH1NP82uT3lo2WaHK9+B3N6H+W71N/T4
u1P7+g0WmdNj3FITvDpTJ7jNhke2atEjI9rvtHz6gwtf9SIujyuNl55uRA==
=r0h9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly clean the BSS to the PoC before allowing EL2 to access it
on nVHE/hVHE/protected configurations
- Propagate ownership of debug registers in protected mode after the
rework that landed in 6.14-rc1
- Stop pretending that we can run the protected mode without a GICv3
being present on the host
- Fix a use-after-free situation that can occur if a vcpu fails to
initialise the NV shadow S2 MMU contexts
- Always evaluate the need to arm a background timer for fully
emulated guest timers
- Fix the emulation of EL1 timers in the absence of FEAT_ECV
- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
s390:
- move some of the guest page table (gmap) logic into KVM itself,
inching towards the final goal of completely removing gmap from the
non-kvm memory management code.
As an initial set of cleanups, move some code from mm/gmap into kvm
and start using __kvm_faultin_pfn() to fault-in pages as needed;
but especially stop abusing page->index and page->lru to aid in the
pgdesc conversion.
x86:
- Add missing check in the fix to defer starting the huge page
recovery vhost_task
- SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
KVM: remove kvm_arch_post_init_vm
KVM: selftests: Fix spelling mistake "initally" -> "initially"
kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
KVM: arm64: timer: Always evaluate the need for a soft timer
KVM: arm64: Fix nested S2 MMU structures reallocation
KVM: arm64: Fail protected mode init if no vgic hardware is present
KVM: arm64: Flush/sync debug state in protected mode
KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
KVM: s390: remove the last user of page->index
KVM: s390: move PGSTE softbits
KVM: s390: remove useless page->index usage
KVM: s390: move gmap_shadow_pgt_lookup() into kvm
KVM: s390: stop using lists to keep track of used dat tables
KVM: s390: stop using page->index for non-shadow gmaps
KVM: s390: move some gmap shadowing functions away from mm/gmap.c
KVM: s390: get rid of gmap_translate()
KVM: s390: get rid of gmap_fault()
...
Add an implementation for directory access operations.
To keep nolibc itself allocation-free, a "DIR *" does not point to any
data, but directly encodes a filedescriptor number, equivalent to "FILE *".
Without any per-directory storage it is not possible to implement
readdir() POSIX confirming. Instead only readdir_r() is provided.
While readdir_r() is deprecated in glibc, the reasons for that are
not applicable to nolibc.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Link: https://lore.kernel.org/r/20250209-nolibc-dir-v2-2-57cc1da8558b@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Remove the "crct10dif" shash algorithm from the crypto API. It has no
known user now that the lib is no longer built on top of it. It has no
remaining references in kernel code. The only other potential users
would be the usual components that allow specifying arbitrary hash
algorithms by name, namely AF_ALG and dm-integrity. However there are
no indications that "crct10dif" is being used with these components.
Debian Code Search and web searches don't find anything relevant, and
explicitly grepping the source code of the usual suspects (cryptsetup,
libell, iwd) finds no matches either. "crc32" and "crc32c" are used in
a few more places, but that doesn't seem to be the case for "crct10dif".
crc_t10dif_update() is also tested by crc_kunit now, so the test
coverage provided via the crypto self-tests is no longer needed.
Also note that the "crct10dif" shash algorithm was inconsistent with the
rest of the shash API in that it wrote the digest in CPU endianness,
making the resulting byte array differ on little endian vs. big endian
platforms. This means it was effectively just built for use by the lib
functions, and it was not actually correct to treat it as "just another
hash function" that could be dropped in via the shash API.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250206173857.39794-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
- Allow uretprobe on x86_64 to avoid behavioral complications (Eyal Birger)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ6e/FAAKCRA2KwveOeQk
u/xCAP9gd2nRw9jXgpg/CCfxkX0Yj3/pnzQoCDlS2lWy43BWNgEAtcJFDvz2Lg09
omRld7QHjbMhNqihYgXRyD0nzX42uwY=
=0JOg
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fix from Kees Cook:
"This is really a work-around for x86_64 having grown a syscall to
implement uretprobe, which has caused problems since v6.11.
This may change in the future, but for now, this fixes the unintended
seccomp filtering when uretprobe switched away from traps, and does so
with something that should be easy to backport.
- Allow uretprobe on x86_64 to avoid behavioral complications (Eyal
Birger)"
* tag 'seccomp-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: validate uretprobe syscall passes through seccomp
seccomp: passthrough uretprobe systemcall without filtering
Those two scripts were used by test_flow_dissector.sh to setup/cleanup
the network topology before/after the tests. test_flow_dissector.sh
have been deleted by commit 63b37657c5 ("selftests/bpf: remove
test_flow_dissector.sh") so they aren't used anywhere now.
Remove the two unused scripts and their Makefile entries.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250204-with-v1-1-387a42118cd4@bootlin.com
Resetting queues while the device is down should be legal.
Allow it, test it. Ideally we'd test this with a real device
supporting devmem but I don't have access to such devices.
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250206225638.1387810-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZ6XhrQAKCRCRxhvAZXjc
oujrAQCpGmhvh2jGIKcSmEigNHOGCUXDG+1QsVpnCeP9OaUrkAEA+dMo4Ai4hz4J
nYeeAgpjGuu+XLMmi7EiGxpI0fQL3gc=
=oN/E
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.14-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Fix fsnotify FMODE_NONOTIFY* handling.
This also disables fsnotify on all pseudo files by default apart from
very select exceptions. This carries a regression risk so we need to
watch out and adapt accordingly. However, it is overall a significant
improvement over the current status quo where every rando file can
get fsnotify enabled.
- Cleanup and simplify lockref_init() after recent lockref changes.
- Fix vboxfs build with gcc-15.
- Add an assert into inode_set_cached_link() to catch corrupt links.
- Allow users to also use an empty string check to detect whether a
given mount option string was empty or not.
- Fix how security options were appended to statmount()'s ->mnt_opt
field.
- Fix statmount() selftests to always check the returned mask.
- Fix uninitialized value in vfs_statx_path().
- Fix pidfs_ioctl() sanity checks to guard against ioctl() overloading
and preserve extensibility.
* tag 'vfs-6.14-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
vfs: sanity check the length passed to inode_set_cached_link()
pidfs: improve ioctl handling
fsnotify: disable pre-content and permission events by default
selftests: always check mask returned by statmount(2)
fsnotify: disable notification by default for all pseudo files
fs: fix adding security options to statmount.mnt_opt
fsnotify: use accessor to set FMODE_NONOTIFY_*
lockref: remove count argument of lockref_init
gfs2: switch to lockref_init(..., 1)
gfs2: use lockref_init for gl_lockref
statmount: let unset strings be empty
vboxsf: fix building with GCC 15
fs/stat.c: avoid harmless garbage value problem in vfs_statx_path()
STATMOUNT_MNT_OPTS can actually be missing if there are no options. This
is a change of behavior since 75ead69a71 ("fs: don't let statmount return
empty strings").
The other checks shouldn't actually trigger, but add them for correctness
and for easier debugging if the test fails.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20250129160641.35485-1-mszeredi@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The uretprobe syscall is implemented as a performance enhancement on
x86_64 by having the kernel inject a call to it on function exit; User
programs cannot call this system call explicitly.
As such, this syscall is considered a kernel implementation detail and
should not be filtered by seccomp.
Enhance the seccomp bpf test suite to check that uretprobes can be
attached to processes without the killing the process regardless of
seccomp policy.
Signed-off-by: Eyal Birger <eyal.birger@gmail.com>
Link: https://lore.kernel.org/r/20250202162921.335813-3-eyal.birger@gmail.com
[kees: Skip archs without __NR_uretprobe]
Signed-off-by: Kees Cook <kees@kernel.org>
- core: harmonize tstats and dstats
- ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels
- eth: tun: revert fix group permission check
- eth: stmmac: revert "specify hardware capability value when FIFO size isn't specified"
Previous releases - regressions:
- udp: gso: do not drop small packets when PMTU reduces
- rxrpc: fix race in call state changing vs recvmsg()
- eth: ice: fix Rx data path for heavy 9k MTU traffic
- eth: vmxnet3: fix tx queue race condition with XDP
Previous releases - always broken:
- sched: pfifo_tail_enqueue: drop new packet when sch->limit == 0
- ethtool: ntuple: fix rss + ring_cookie check
- rxrpc: fix the rxrpc_connection attend queue handling
Misc:
- recognize Kuniyuki Iwashima as a maintainer
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=t5WM
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Interestingly the recent kmemleak improvements allowed our CI to catch
a couple of percpu leaks addressed here.
We (mostly Jakub, to be accurate) are working to increase review
coverage over the net code-base tweaking the MAINTAINER entries.
Current release - regressions:
- core: harmonize tstats and dstats
- ipv6: fix dst refleaks in rpl, seg6 and ioam6 lwtunnels
- eth: tun: revert fix group permission check
- eth: stmmac: revert "specify hardware capability value when FIFO
size isn't specified"
Previous releases - regressions:
- udp: gso: do not drop small packets when PMTU reduces
- rxrpc: fix race in call state changing vs recvmsg()
- eth: ice: fix Rx data path for heavy 9k MTU traffic
- eth: vmxnet3: fix tx queue race condition with XDP
Previous releases - always broken:
- sched: pfifo_tail_enqueue: drop new packet when sch->limit == 0
- ethtool: ntuple: fix rss + ring_cookie check
- rxrpc: fix the rxrpc_connection attend queue handling
Misc:
- recognize Kuniyuki Iwashima as a maintainer"
* tag 'net-6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits)
Revert "net: stmmac: Specify hardware capability value when FIFO size isn't specified"
MAINTAINERS: add a sample ethtool section entry
MAINTAINERS: add entry for ethtool
rxrpc: Fix race in call state changing vs recvmsg()
rxrpc: Fix call state set to not include the SERVER_SECURING state
net: sched: Fix truncation of offloaded action statistics
tun: revert fix group permission check
selftests/tc-testing: Add a test case for qdisc_tree_reduce_backlog()
netem: Update sch->q.qlen before qdisc_tree_reduce_backlog()
selftests/tc-testing: Add a test case for pfifo_head_drop qdisc when limit==0
pfifo_tail_enqueue: Drop new packet when sch->limit == 0
selftests: mptcp: connect: -f: no reconnect
net: rose: lock the socket in rose_bind()
net: atlantic: fix warning during hot unplug
rxrpc: Fix the rxrpc_connection attend queue handling
net: harmonize tstats and dstats
selftests: drv-net: rss_ctx: don't fail reconfigure test if queue offset not supported
selftests: drv-net: rss_ctx: add missing cleanup in queue reconfigure
ethtool: ntuple: fix rss + ring_cookie check
ethtool: rss: fix hiding unsupported fields in dumps
...
Extend the VXLAN FDB aging test case to verify that FDB entries are aged
out when they only forward traffic and not refreshed by received
traffic.
The test fails before "vxlan: Age out FDB entries based on 'updated'
time":
# ./vxlan_bridge_1d.sh
[...]
TEST: VXLAN: Ageing of learned FDB entry [FAIL]
[...]
# echo $?
1
And passes after it:
# ./vxlan_bridge_1d.sh
[...]
TEST: VXLAN: Ageing of learned FDB entry [ OK ]
[...]
# echo $?
0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250204145549.1216254-9-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Integrate the test case provided by Mingi Cho into TDC.
All test results:
1..4
ok 1 ca5e - Check class delete notification for ffff:
ok 2 e4b7 - Check class delete notification for root ffff:
ok 3 33a9 - Check ingress is not searchable on backlog update
ok 4 a4b9 - Test class qlen notification
Cc: Mingi Cho <mincho@theori.io>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-5-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When limit == 0, pfifo_tail_enqueue() must drop new packet and
increase dropped packets count of the qdisc.
All test results:
1..16
ok 1 a519 - Add bfifo qdisc with system default parameters on egress
ok 2 585c - Add pfifo qdisc with system default parameters on egress
ok 3 a86e - Add bfifo qdisc with system default parameters on egress with handle of maximum value
ok 4 9ac8 - Add bfifo qdisc on egress with queue size of 3000 bytes
ok 5 f4e6 - Add pfifo qdisc on egress with queue size of 3000 packets
ok 6 b1b1 - Add bfifo qdisc with system default parameters on egress with invalid handle exceeding maximum value
ok 7 8d5e - Add bfifo qdisc on egress with unsupported argument
ok 8 7787 - Add pfifo qdisc on egress with unsupported argument
ok 9 c4b6 - Replace bfifo qdisc on egress with new queue size
ok 10 3df6 - Replace pfifo qdisc on egress with new queue size
ok 11 7a67 - Add bfifo qdisc on egress with queue size in invalid format
ok 12 1298 - Add duplicate bfifo qdisc on egress
ok 13 45a0 - Delete nonexistent bfifo qdisc
ok 14 972b - Add prio qdisc on egress with invalid format for handles
ok 15 4d39 - Delete bfifo qdisc twice
ok 16 d774 - Check pfifo_head_drop qdisc enqueue behaviour when limit == 0
Signed-off-by: Quang Le <quanglex97@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Link: https://patch.msgid.link/20250204005841.223511-3-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The '-f' parameter is there to force the kernel to emit MPTCP FASTCLOSE
by closing the connection with unread bytes in the receive queue.
The xdisconnect() helper was used to stop the connection, but it does
more than that: it will shut it down, then wait before reconnecting to
the same address. This causes the mptcp_join's "fastclose test" to fail
all the time.
This failure is due to a recent change, with commit 218cc16632
("selftests: mptcp: avoid spurious errors on disconnect"), but that went
unnoticed because the test is currently ignored. The recent modification
only shown an existing issue: xdisconnect() doesn't need to be used
here, only the shutdown() part is needed.
Fixes: 6bf41020b7 ("selftests: mptcp: update and extend fastclose test-cases")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250204-net-mptcp-sft-conn-f-v1-1-6b470c72fffa@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Attempts to replace an MDB group membership of the host itself are
currently bounced:
# ip link add name br up type bridge vlan_filtering 1
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
# bridge mdb replace dev br port br grp 239.0.0.1 vid 2
Error: bridge: Group is already joined by host.
A similar operation done on a member port would succeed. Ignore the check
for replacement of host group memberships as well.
The bit of code that this enables is br_multicast_host_join(), which, for
already-joined groups only refreshes the MC group expiration timer, which
is desirable; and a userspace notification, also desirable.
Change a selftest that exercises this code path from expecting a rejection
to expecting a pass. The rest of MDB selftests pass without modification.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/e5c5188b9787ae806609e7ca3aa2a0a501b9b5c4.1738685648.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some selftests need libynl.a. When building it try to skip
generating the ReST documentation, libynl.a does not depend
on them.
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203214850.1282291-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since 67ab80a018 ("selftests/bpf: Prefer static linking for LLVM
libraries"), only statically linking test_progs is supported. However,
some distros only provide a dynamically linkable LLVM.
This commit adds a fallback for dynamically linking LLVM if static
linking is not available. If both options are available, static linking
is chosen.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/872b64e93de9a6cd6a7a10e6a5c5e7893704f743.1738276344.git.dxu@dxuuu.xyz
Add a BTF verification test case for a type_tag with a kflag set.
Type tags with a kflag are now valid.
Add BTF_DECL_ATTR_ENC and BTF_TYPE_ATTR_ENC test helper macros,
corresponding to *_TAG_ENC.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250130201239.1429648-7-ihor.solodrai@linux.dev
BTF type tags and decl tags now may have info->kflag set to 1,
changing the semantics of the tag.
Change BTF verification to permit BTF that makes use of this feature:
* remove kflag check in btf_decl_tag_check_meta(), as both values
are valid
* allow kflag to be set for BTF_KIND_TYPE_TAG type in
btf_ref_type_check_meta()
Make sure kind_flag is NOT set when checking for specific BTF tags,
such as "kptr", "user" etc.
Modify a selftest checking for kflag in decl_tag accordingly.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250130201239.1429648-6-ihor.solodrai@linux.dev
Factor out common routines handling custom BTF from
test_btf_dump_incremental. Then use them in the
test_btf_dump_type_tags.
test_btf_dump_type_tags verifies that a type tag is dumped correctly
with respect to its kflag.
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20250130201239.1429648-5-ihor.solodrai@linux.dev
Recent experience shows that the srcu_read_lock_nmisafe() and
srcu_read_unlock_nmisafe() functions are not sufficiently tested.
This commit therefore causes the torture.sh script's SRCU lockdep testing
to use these two functions. This will cause these two functions to
be regularly tested by several developers (myself included) who use
torture.sh as an RCU acceptance test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
This commit causes the rcutorture SRCU-P scenario use the
srcu_read_lock_fast() and srcu_read_unlock_fast() functions. This will
cause these two functions to be regularly tested by several developers
(myself included), for example, those who use torture.sh as an RCU
acceptance test.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Now we have PIDFD_SELF available for process_madvise(), make use of it in
the guard pages test.
This is both more convenient and asserts that PIDFD_SELF works as expected.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/69fbbe088d3424de9983e145228459cb05a8f13d.1738268370.git.lorenzo.stoakes@oracle.com
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add tests to assert that PIDFD_SELF* correctly refers to the current
thread and process.
We explicitly test pidfd_send_signal(), however We defer testing of
mm-specific functionality which uses pidfd, namely process_madvise() and
process_mrelease() to mm testing (though note the latter can not be
sensibly tested as it would require the testing process to be dying).
We also correct the pidfd_open_test.c fields which refer to .request_mask
whereas the UAPI header refers to .mask, which otherwise break the import
of the UAPI header.
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Link: https://lore.kernel.org/r/7ab0e48b26ba53abf7b703df2dd11a2e99b8efb2.1738268370.git.lorenzo.stoakes@oracle.com
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new selftest to verify netconsole's handling of messages that
exceed the packet size limit and require fragmentation. The test sends
messages with varying sizes and userdata, validating that:
1. Large messages are correctly fragmented and reassembled
2. Userdata fields are properly preserved across fragments
3. Messages work correctly with and without kernel release version
appending
The test creates a networking environment using netdevsim, sends
messages through /dev/kmsg, and verifies the received fragments maintain
message integrity.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250203-netcons_frag_msgs-v1-1-5bc6bedf2ac0@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The pending efforts to add CXL Accelerator (type-2) device [1], and
Dynamic Capacity (DCD) support [2], tripped on the
no-longer-fit-for-purpose design in the CXL subsystem for tracking
device-physical-address (DPA) metadata. Trip hazards include:
- CXL Memory Devices need to consider a PMEM partition, but Accelerator
devices with CXL.mem likely do not in the common case.
- CXL Memory Devices enumerate DPA through Memory Device mailbox
commands like Partition Info, Accelerators devices do not.
- CXL Memory Devices that support DCD support more than 2 partitions.
Some of the driver algorithms are awkward to expand to > 2 partition
cases.
- DPA performance data is a general capability that can be shared with
accelerators, so tracking it in 'struct cxl_memdev_state' is no longer
suitable.
- Hardcoded assumptions around the PMEM partition always being index-1
if RAM is zero-sized or PMEM is zero sized.
- 'enum cxl_decoder_mode' is sometimes a partition id and sometimes a
memory property, it should be phased in favor of a partition id and
the memory property comes from the partition info.
Towards cleaning up those issues and allowing a smoother landing for the
aforementioned pending efforts, introduce a 'struct cxl_dpa_partition'
array to 'struct cxl_dev_state', and 'struct cxl_range_info' as a shared
way for Memory Devices and Accelerators to initialize the DPA information
in 'struct cxl_dev_state'.
For now, split a new cxl_dpa_setup() from cxl_mem_create_range_info() to
get the new data structure initialized, and cleanup some qos_class init.
Follow on patches will go further to use the new data structure to
cleanup algorithms that are better suited to loop over all possible
partitions.
cxl_dpa_setup() follows the locking expectations of mutating the device
DPA map, and is suitable for Accelerator drivers to use. Accelerators
likely only have one hardcoded 'ram' partition to convey to the
cxl_core.
Link: http://lore.kernel.org/20241230214445.27602-1-alejandro.lucero-palau@amd.com [1]
Link: http://lore.kernel.org/20241210-dcd-type2-upstream-v8-0-812852504400@intel.com [2]
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305827.668823.13978794102080021276.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In preparation for consolidating all DPA partition information into an
array of DPA metadata, introduce helpers that hide the layout of the
current data. I.e. make the eventual replacement of ->ram_res,
->pmem_res, ->ram_perf, and ->pmem_perf with a new DPA metadata array a
no-op for code paths that consume that information, and reduce the noise
of follow-on patches.
The end goal is to consolidate all DPA information in 'struct
cxl_dev_state', but for now the helpers just make it appear that all DPA
metadata is relative to @cxlds.
As the conversion to generic partition metadata walking is completed,
these helpers will naturally be eliminated, or reduced in scope.
Cc: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Link: https://patch.msgid.link/173864305238.668823.16553986866633608541.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The script uses non-POSIX features like `[[` for conditionals and hence
does not work when run with a POSIX /bin/sh.
Change the shebang to /bin/bash instead, like the other tests in cgroup.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
There is a spelling mistake in a literal string and in the function
test_get_inital_dirty. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-ID: <20250204105647.367743-1-colin.i.king@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- move some kvm-related functions from mm into kvm
- remove all usage of page->index and page->lru from kvm
- fixes and cleanups for vsie
-----BEGIN PGP SIGNATURE-----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=zCOv
-----END PGP SIGNATURE-----
Merge tag 'kvm-s390-next-6.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
- some selftest fixes
- move some kvm-related functions from mm into kvm
- remove all usage of page->index and page->lru from kvm
- fixes and cleanups for vsie
Vast majority of drivers does not support queue offset.
Simply return if the rss context + queue ntuple fails.
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit under Fixes adds ntuple rules but never deletes them.
Fixes: 29a4bc1fe9 ("selftest: extend test_rss_context_queue_reconfigure for action addition")
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20250201013040.725123-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the cxlflash driver for IBM CAPI Flash devices.
The cxlflash driver has received minimal maintenance for some time, and
the CAPI Flash hardware that uses it is no longer commercially available.
Thanks to Uma Krishnan, Matthew Ochs and Manoj Kumar for their work on
this driver over the years.
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20250203072801.365551-2-ajd@linux.ibm.com
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Avoid using a stale test kernel configuration by always synchronizing
it to the current source tree.
kbuild is smart enough to avoid spurious rebuilds.
Shuffle the code around a bit to keep all the commands with side-effects
together.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-config-v2-5-5701c35995d6@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Some targets use the test kernel configuration.
Executing defconfig in the same make invocation as those targets results
in errors as the configuration may be in an inconsistent state during
reconfiguration.
Avoid this by introducing ordering dependencies between the defconfig
and some other targets.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-config-v2-4-5701c35995d6@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
"mrproper" unnecessarily cleans a lot of files.
kbuild is smart enough to handle changed configurations,
so the cleanup is not necessary and only leads to excessive rebuilds.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-config-v2-3-5701c35995d6@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
To make sure nolibc itself is compatible with -Wmissing-prototypes the
compiler flag should be enabled when building nolibc-test.
However some of its functions are non-static to ease debugging [0],
triggering the compiler warning.
Disable the warning inside nolibc-test while still enabling it for
nolibc itself.
[0] https://lore.kernel.org/lkml/ZMjM0UPRAqoC+goY@1wt.eu/
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20250123-nolibc-prototype-v1-2-e1afc5c1999a@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The XDP redirection is tested without any flag provided to the
xdp_attach() function.
Add two subtests that check the correct behaviour with
XDP_FLAGS_{DRV/SKB}_MODE flags
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-10-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The network namespaces and the veth used by the tests have hardcoded
names that can conflict with other tests during parallel runs.
Use the append_tid() helper to ensure the uniqueness of these names.
Use the static network configuration table as a template on which
thread IDs are appended in each test.
Set a fixed size to remote_addr field so the struct veth_configuration
can also have a fixed size.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-9-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
XDP flags are hardcoded to 0 at attachment.
Add flags attributes to the struct prog_configuration to allow flag
modifications for each test case.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-8-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The BPF program attached to each veth is hardcoded through the
use of the struct skeletons. It prevents from re-using the initialization
code in new test cases.
Replace the struct skeletons by a bpf_object table.
Add a struct prog_configuration that holds the name of BPF program to
load on a given veth pair.
Use bpf_object__find_program_by_name() / bpf_xdp_attach() API instead of
bpf_program__attach_xdp() to retrieve the BPF programs from their names.
Detach BPF progs in the cleanup() as it's not automatically done by this
API.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-7-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The network topology is held by the config[] table. This 'config' name
is a bit too generic if we want to add other configuration variables.
Rename config[] to net_config[].
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-6-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
configure_network() does two things : it first creates the network
topology and then configures the BPF maps to fit the test needs. This
isn't convenient if we want to re-use the same network topology for
different test cases.
Rename configure_network() create_network().
Move the BPF configuration to the test itself.
Split the test description in two parts, first the description of the
network topology, then the description of the test case.
Remove the veth indexes from the ASCII art as dynamic ones are used
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-5-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In the struct veth_configuration, the next_veth string is used to tell
the next virtual interface to which packets must be redirected to. So it
has to match the local_veth string of an other veth_configuration.
Change next_veth type to int to avoid handling two identical strings.
This integer is used as an offset in the network configuration table.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-4-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
check_ping() directly returns a SYS_NOFAIL without any previous
treatment. It's called only once in the file and hardcodes the used
namespace and ip address.
Replace check_ping() with a direct call of SYS_NOFAIL in the test.
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-3-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some tests can't be run in parallel because they use same namespace
names or veth names.
Create an helper that appends the thread ID to a given string. 8
characters are used for it (7 digits + '\0')
Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet@bootlin.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250131-redirect-multi-v4-1-970b33678512@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The runqslower binary from a cross-endian build currently fails to run
because the included skeleton has host endianness. Fix this by passing the
target BPF endianness to the runqslower sub-make.
Fixes: 5a63c33d6f ("selftests/bpf: Support cross-endian building")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20250125071423.2603588-1-itugrok@yahoo.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There are two bpf_link__destroy(freplace_link) calls in
test_tailcall_bpf2bpf_freplace(). After the first bpf_link__destroy()
is called, if the following bpf_map_{update,delete}_elem() throws an
exception, it will jump to the "out" label and call bpf_link__destroy()
again, causing double free and eventually leading to a segfault.
Fix it by directly resetting freplace_link to NULL after the first
bpf_link__destroy() call.
Fixes: 021611d33e ("selftests/bpf: Add test to verify tailcall and freplace restrictions")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/bpf/20250122022838.1079157-1-wutengda@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 4094871db1 ("udp: only do GSO if # of segs > 1") avoided GSO
for small packets. But the kernel currently dismisses GSO requests only
after checking MTU/PMTU on gso_size. This means any packets, regardless
of their payload sizes, could be dropped when PMTU becomes smaller than
requested gso_size. We encountered this issue in production and it
caused a reliability problem that new QUIC connection cannot be
established before PMTU cache expired, while non GSO sockets still
worked fine at the same time.
Ideally, do not check any GSO related constraints when payload size is
smaller than requested gso_size, and return EMSGSIZE instead of EINVAL
on MTU/PMTU check failure to be more specific on the error cause.
Fixes: 4094871db1 ("udp: only do GSO if # of segs > 1")
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Suggested-by: Willem de Bruijn <willemdebruijn.kernel@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- selftests: Handle old glibc without execveat(2) (Mickaël Salaün)
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ51DjgAKCRA2KwveOeQk
u5ahAP9m2RJdQm/oW/SPdhZ3nJynrD0UXKpZPYe733E9D2mccQEAvh0LIAUJGJoK
FbpLRWSGXOkWxAJ1oabQo8GB5v+8EQs=
=WVRq
-----END PGP SIGNATURE-----
Merge tag 'AT_EXECVE_CHECK-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull AT_EXECVE_CHECK selftest fix from Kees Cook:
"Fixes the AT_EXECVE_CHECK selftests which didn't run on old versions
of glibc"
* tag 'AT_EXECVE_CHECK-v6.14-rc1-fix1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests: Handle old glibc without execveat(2)
* The PH1520 pinctrl and dwmac drivers are enabeled in defconfig.
* A redundant AQRL barrier has been removed from the futex cmpxchg
implementation.
* Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them.
* Some more page table information is now printed on die() and systems
that cause PA overflows.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmedHIoTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYievXD/4hdt8h+fMM0I9mmJS096YevRJONdfe
Wk7D5q4PBwSHISHahuzfphieBhqPVnYkkEd7Vw6xRrLbUnhA41Fe0uvR52dx5UZd
3LwrDV/kjGTD59x6A2Zo9bSs/qPKJ2WHmHwHM21jY5tvcIB2Lo4dF8HT63OrwVNW
DxsujLO0jUw+HEwXPsfmUAZJWOPZuUnatl/9CaLMLwQv5N7yiMuz5oYDzJXTLnNh
m3Hv3CCtj1EeQPqDoWzz9nZvmAKOwcblSzz6OAy+xrRk1N0N3QFQPbIaRvkI9OVz
+wPHQiyx4KZNeAe0csV0uLQRIiXZV8rkCz5UT65s3Bfy3vukvzz+1VBdNnCqiP8Q
RpCTcYw62Cr6BWnvyTh+s9bhHb1ijG043nXd/Ty7ZRPCNLKHY6oL1CZ0pgqbTwPs
D2U2ZTZFTc35mPrU6QMfbTiUVWCU2XagFhI27Dgj3xh9mkBOQCHwk2Mrzn7uS4iz
xGNnrjRnKtuwBrvD68JzxCkEi8INFn2ifbVr44VZrOdTM7XtODGAYrBohQtV62kU
2L+q8DoHYis+0xFbR1wdrY1mRZoe45boUFgwnOpmoBr9ULe584sL+526y7IkkEHu
/9hmLPtLg7nyoR/rO1j1Sfg4Eqdwg5HY1TKNfagJZAdu23EDRwrcW1PD0P6vtDv8
j4og8MmL7dTt3A==
=HbAQ
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- The PH1520 pinctrl and dwmac drivers are enabeled in defconfig
- A redundant AQRL barrier has been removed from the futex cmpxchg
implementation
- Support for the T-Head vector extensions, which includes exposing
these extensions to userspace on systems that implement them
- Some more page table information is now printed on die() and systems
that cause PA overflows
* tag 'riscv-for-linus-6.14-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: add a warning when physical memory address overflows
riscv/mm/fault: add show_pte() before die()
riscv: Add ghostwrite vulnerability
selftests: riscv: Support xtheadvector in vector tests
selftests: riscv: Fix vector tests
riscv: hwprobe: Document thead vendor extensions and xtheadvector extension
riscv: hwprobe: Add thead vendor extension probing
riscv: vector: Support xtheadvector save/restore
riscv: Add xtheadvector instruction definitions
riscv: csr: Add CSR encodings for CSR_VXRM/CSR_VXSAT
RISC-V: define the elements of the VCSR vector CSR
riscv: vector: Use vlenb from DT for thead
riscv: Add thead and xtheadvector as a vendor extension
riscv: dts: allwinner: Add xtheadvector to the D1/D1s devicetree
dt-bindings: cpus: add a thead vlen register length property
dt-bindings: riscv: Add xtheadvector ISA extension description
RISC-V: Mark riscv_v_init() as __init
riscv: defconfig: drop RT_GROUP_SCHED=y
riscv/futex: Optimize atomic cmpxchg
riscv: defconfig: enable pinctrl and dwmac support for TH1520
- The biggest changes are the TLB flushing scalability optimizations,
to update the mm_cpumask lazily and related changes. This feature
has both a track record and a continued risk of performance regressions,
so it was already delayed by a cycle - but it's all 100% perfect now™.
(Rik van Riel)
- Also miscellaneous fixes and cleanups. (Gautam Somani,
Kirill A. Shutemov, Sebastian Andrzej Siewior)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=g00u
-----END PGP SIGNATURE-----
Merge tag 'x86-mm-2025-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
- The biggest changes are the TLB flushing scalability optimizations,
to update the mm_cpumask lazily and related changes.
This feature has both a track record and a continued risk of
performance regressions, so it was already delayed by a cycle - but
it's all 100% perfect now™ (Rik van Riel)
- Also miscellaneous fixes and cleanups. (Gautam Somani, Kirill
Shutemov, Sebastian Andrzej Siewior)
* tag 'x86-mm-2025-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Remove unnecessary include of <linux/extable.h>
x86/mtrr: Rename mtrr_overwrite_state() to guest_force_mtrr_state()
x86/mm/selftests: Fix typo in lam.c
x86/mm/tlb: Only trim the mm_cpumask once a second
x86/mm/tlb: Also remove local CPU from mm_cpumask if stale
x86/mm/tlb: Add tracepoint for TLB flush IPI to stale CPU
x86/mm/tlb: Update mm_cpumask lazily
In some rare situations a non default storage key is already set on the
memory used by the test. Within normal VMs the key is reset / zapped
when the memory is added to the VM. This is not the case for ucontrol
VMs. With the initial iske check removed this test case can work in all
situations. The function of the iske instruction is still validated by
the remaining code.
Fixes: 0185fbc6a2 ("KVM: s390: selftests: Add uc_skey VM test case")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250128131803.1047388-1-schlameuss@linux.ibm.com
Message-ID: <20250128131803.1047388-1-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
With the latest patch, attempting to create a memslot from userspace
will result in an EEXIST error for UCONTROL VMs, instead of EINVAL,
since the new memslot will collide with the internal memslot. There is
no simple way to bring back the previous behaviour.
This is not a problem, but the test needs to be fixed accordingly.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-5-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-5-imbrenda@linux.ibm.com>
but as usual there's a slight concentration of fixes for issues
added in the last two weeks before the MW, and driver bugs
from 6.13 which tend to get discovered upon wider distribution.
Including fixes from IPSec, netfilter and Bluetooth.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects
netdev state with a mutex now
Previous releases - regressions:
- eth: mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- eth: bgmac: reduce max frame size to support just 1500 bytes;
the jumbo frame support would previously cause OOB writes,
but now fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted,
avoid false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm: make sure skb->sk is a full sock before accessing its fields
- xfrm: fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=GjBE
-----END PGP SIGNATURE-----
Merge tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from IPSec, netfilter and Bluetooth.
Nothing really stands out, but as usual there's a slight concentration
of fixes for issues added in the last two weeks before the merge
window, and driver bugs from 6.13 which tend to get discovered upon
wider distribution.
Current release - regressions:
- net: revert RTNL changes in unregister_netdevice_many_notify()
- Bluetooth: fix possible infinite recursion of btusb_reset
- eth: adjust locking in some old drivers which protect their state
with spinlocks to avoid sleeping in atomic; core protects netdev
state with a mutex now
Previous releases - regressions:
- eth:
- mlx5e: make sure we pass node ID, not CPU ID to kvzalloc_node()
- bgmac: reduce max frame size to support just 1500 bytes; the
jumbo frame support would previously cause OOB writes, but now
fails outright
- mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted, avoid
false detection of MPTCP blackholing
Previous releases - always broken:
- mptcp: handle fastopen disconnect correctly
- xfrm:
- make sure skb->sk is a full sock before accessing its fields
- fix taking a lock with preempt disabled for RT kernels
- usb: ipheth: improve safety of packet metadata parsing; prevent
potential OOB accesses
- eth: renesas: fix missing rtnl lock in suspend/resume path"
* tag 'net-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
MAINTAINERS: add Neal to TCP maintainers
net: revert RTNL changes in unregister_netdevice_many_notify()
net: hsr: fix fill_frame_info() regression vs VLAN packets
doc: mptcp: sysctl: blackhole_timeout is per-netns
mptcp: blackhole only if 1st SYN retrans w/o MPC is accepted
netfilter: nf_tables: reject mismatching sum of field_len with set key length
net: sh_eth: Fix missing rtnl lock in suspend/resume path
net: ravb: Fix missing rtnl lock in suspend/resume path
selftests/net: Add test for loading devbound XDP program in generic mode
net: xdp: Disallow attaching device-bound programs in generic mode
tcp: correct handling of extreme memory squeeze
bgmac: reduce max frame size to support just MTU 1500
vsock/test: Add test for connect() retries
vsock/test: Add test for UAF due to socket unbinding
vsock/test: Introduce vsock_connect_fd()
vsock/test: Introduce vsock_bind()
vsock: Allow retrying on connect() failure
vsock: Keep the binding until socket destruction
Bluetooth: L2CAP: accept zero as a special value for MTU auto-selection
Bluetooth: btnxpuart: Fix glitches seen in dual A2DP streaming
...
- update gpio-sim selftests to not fail now that we no longer allow
rmdir() on configfs entries of active devices
- remove leftover code from gpio-mxc
-----BEGIN PGP SIGNATURE-----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=Ql6L
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- update gpio-sim selftests to not fail now that we no longer allow
rmdir() on configfs entries of active devices
- remove leftover code from gpio-mxc
* tag 'gpio-fixes-for-v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
selftests: gpio: gpio-sim: Fix missing chip disablements
gpio: mxc: remove dead code after switch to DT-only
Most of the filesystem methods where we care about dentry name
and parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for
expected name and expected parent of the dentry being
validated. That kills quite a bit of boilerplate in
->d_revalidate() instances, along with a bunch of races
where they used to access ->d_name without sufficient
precautions.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZ5gkoQAKCRBZ7Krx/gZQ
6w9FAP4nyxNNWMjE1TwuWR/DNDMYYuw/qn/miZ88B5BUM8hzqgD/W2SjRvcbSaIm
xSIYpbtKgtqNU34P1PU+dBvL8Utz2AE=
=TWY8
-----END PGP SIGNATURE-----
Merge tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs d_revalidate updates from Al Viro:
"Provide stable parent and name to ->d_revalidate() instances
Most of the filesystem methods where we care about dentry name and
parent have their stability guaranteed by the callers;
->d_revalidate() is the major exception.
It's easy enough for callers to supply stable values for expected name
and expected parent of the dentry being validated. That kills quite a
bit of boilerplate in ->d_revalidate() instances, along with a bunch
of races where they used to access ->d_name without sufficient
precautions"
* tag 'pull-revalidate' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
9p: fix ->rename_sem exclusion
orangefs_d_revalidate(): use stable parent inode and name passed by caller
ocfs2_dentry_revalidate(): use stable parent inode and name passed by caller
nfs: fix ->d_revalidate() UAF on ->d_name accesses
nfs{,4}_lookup_validate(): use stable parent inode passed by caller
gfs2_drevalidate(): use stable parent inode and name passed by caller
fuse_dentry_revalidate(): use stable parent inode and name passed by caller
vfat_revalidate{,_ci}(): use stable parent inode passed by caller
exfat_d_revalidate(): use stable parent inode passed by caller
fscrypt_d_revalidate(): use stable parent inode passed by caller
ceph_d_revalidate(): propagate stable name down into request encoding
ceph_d_revalidate(): use stable parent inode passed by caller
afs_d_revalidate(): use stable name and parent inode passed by caller
Pass parent directory inode and expected name to ->d_revalidate()
generic_ci_d_compare(): use shortname_storage
ext4 fast_commit: make use of name_snapshot primitives
dissolve external_name.u into separate members
make take_dentry_name_snapshot() lockless
dcache: back inline names with a struct-wrapped array of unsigned long
make sure that DNAME_INLINE_LEN is a multiple of word size
Add a test to bpf_offload.py for loading a devbound XDP program in
generic mode, checking that it fails correctly.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250127131344.238147-2-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Deliberately fail a connect() attempt; expect error. Then verify that
subsequent attempt (using the same socket) can still succeed, rather than
fail outright.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-6-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fail the autobind, then trigger a transport reassign. Socket might get
unbound from unbound_sockets, which then leads to a reference count
underflow.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Michal Luczaj <mhal@rbox.co>
Link: https://patch.msgid.link/20250128-vsock-transport-vs-autobind-v3-5-1cf57065b770@rbox.co
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add test cases for bpf + strparser and separated them from
sockmap_basic, as strparser has more encapsulation and parsing
capabilities compared to standard sockmap.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-6-mrpre@163.com
SOCK_NONBLOCK flag is only effective during socket creation, not during
recv. Use MSG_DONTWAIT instead.
Signed-off-by: Jiayuan Chen <mrpre@163.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://patch.msgid.link/20250122100917.49845-5-mrpre@163.com
- Move HMAT printouts to pr_debug()
- Add CXL type2 support to cxl_dvsec_rr_decode() in preparation for
type2 support
- A series that updates CXL event records to spec r3.1 and related
changes
- Refactoring of cxl_find_regblock_instance() to count regblocks
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEE5DAy15EJMCV1R6v9YGjFFmlTOEoFAmeaUgcACgkQYGjFFmlT
OEqheg/+Iz7d1uBmyEcgf9JX0XAoPuG7uAPQcgSDK1u4gG0WxuBn+rc4Vprukml5
0wn1n6LVQg3lkQp9oNQKwEMt1es7Y2RDOaPd17eiBxFoBPkmHIF8fl2nhoLzCSco
j23kdKsySW5wcT7FdppVT0cRdMQM/9ecJhR7mribdIxNwmPP2D7knnOYjytQjRFp
C65EGZ97cn8CAJt7zdBRLNcgzJc4iVfT7jyRbtFvA/Bx4WU7qSCiwh8c2KZ4U3wE
piCoMnsv/RwMjbGZNmEt7dTC3RIawWajGchWJ9aolXYidWm6sxpx6JOgzaGWJK5q
19fsb978SnqA6tr4qNmTgohl20gkRiqQZnYWZoKlyIZeBA+IqMdpl0YosSVNvS85
kBlau9eMmZVIxJlHevQ3+5NBCzzXz2rLnORAJUUCgHnuWeKU/+t31xK2lfbMJet9
Q6wkJC4kz1u6xLBP1aEnkVtQE0RY1UmUw4aU0L3jiLF6IGRF9wBRW/bFBKTEYLul
7cL7R5rwFxIwvR1uNIQVVnSTUzHUeA1brQS1I6QJP2SNzVl2uew1Xlx6KrLt3kQw
zOuQFAvMa3L/HWjfDJYvcxfzhYN2ng3ec3XjyGN75S5jrb7a0PZ5vOmxZ6PFvEZE
8HFHfQqvpdO0e1SLWgLv7OBENM3GgLovbeSbEhQOlxzjx7QEsFc=
=Tavn
-----END PGP SIGNATURE-----
Merge tag 'cxl-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull Compute Express Link (CXL) updates from Dave Jiang:
"A tweak to the HMAT output that was acked by Rafael, a prep patch for
CXL type2 devices support that's coming soon, refactoring of the CXL
regblock enumeration code, and a series of patches to update the event
records to CXL spec r3.1:
- Move HMAT printouts to pr_debug()
- Add CXL type2 support to cxl_dvsec_rr_decode() in preparation for
type2 support
- A series that updates CXL event records to spec r3.1 and related
changes
- Refactoring of cxl_find_regblock_instance() to count regblocks"
* tag 'cxl-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/core/regs: Refactor out functions to count regblocks of given type
cxl/test: Update test code for event records to CXL spec rev 3.1
cxl/events: Update Memory Module Event Record to CXL spec rev 3.1
cxl/events: Update DRAM Event Record to CXL spec rev 3.1
cxl/events: Update General Media Event Record to CXL spec rev 3.1
cxl/events: Add Component Identifier formatting for CXL spec rev 3.1
cxl/events: Update Common Event Record to CXL spec rev 3.1
cxl/pci: Add CXL Type 1/2 support to cxl_dvsec_rr_decode()
ACPI/HMAT: Move HMAT messages to pr_debug()
The function bpf_test_init() now returns an error if user_size
(.data_size_in) is less than ETH_HLEN, causing the tests to
fail. Adjust the data size to ensure it meets the requirement of
ETH_HLEN.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250121150643.671650-2-syoshida@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Here is the big set of driver core and debugfs updates for 6.14-rc1.
It's coming late in the merge cycle as there are a number of merge
conflicts with your tree now, and I wanted to make sure they were
working properly. To resolve them, look in linux-next, and I will send
the "fixup" patch as a response to the pull request.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at least
one user that does have a regression with these, but Al is working on
tracking down the fix for it. In my use (and everyone else's linux-next
use), it does not seem like a big issue at the moment.
Here's a short list of the things in here:
- driver core bindings for PCI, platform, OF, and some i/o functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing things
in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon".
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5koPA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFHACfT5acDKf2Bov2Lc/5u3vBW/R6ChsAnj+LmgVI
hcDSPodj4szR40RRnzBd
=u5Ey
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
* New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
* Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the
way for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmeYqJcQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNLUhCACxUTMVQXhfW3qbh0UQxPd7XXvjI+Hm7SPS
wDuVTle4jrFVGHxuZqtgWLmx8hD7bqO965qmFgbevKlwsRY33onH2nbH4i4AcwbA
jcdM4yMHZI4+Qmnb4G5ZJ89IwjAhHPZTBOV5KRhyHQ/qtRciHHtOgJde7II9fd68
uIESg4SSSyUzI47YSEHmGVmiBIhdQhq2qust0m6NPFalEGYstPbpluPQ6R1CsDqK
v14TIAW7t0vSPucBeODxhA5gEa2JsvNi+sqA+DF/ELH2ZqpkuR7rofgMGblaXCSD
JXa5xamRB9dI5zi8vatwfOzYlog+/gzmPqMh/9JXpiDGHxJe0vlz
=tQ8F
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZ5fGOQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynatACeLlbkhUT544Va1eOL2TkjfcGxrZUAoJ3ymGC0
y0N7/+fWL6aS+b4sEilv
=TU0D
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
Some Makefiles currently override CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure, for example:
/usr/bin/ld: /tmp/ccd2apay.o: relocation R_X86_64_32 against
`.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/lib/csum] Error 1
openvswitch/Makefile CFLAGS currently do not appear to be used, but
fix it anyway for the case when new tests are introduced in future.
Fixes: 1d0dc857b5 ("selftests: drv-net: add checksum tests")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/3d173603ee258f419d0403363765c9f9494ff79a.1737635092.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
mptcp Makefile currently overrides CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure, for example:
make[1]: *** [../../lib.mk:222: tools/testing/selftests/net/mptcp/mptcp_sockopt] Error 1
/usr/bin/ld: /tmp/ccqyMVdb.o: relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
Fixes: cc937dad85 ("selftests: centralize -D_GNU_SOURCE= to CFLAGS in lib.mk")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/7abc701da9df39c2d6cd15bc3cf9e6cee445cb96.1737621162.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In UP systems p->migration_disabled is not available. Fix this by using
the portable helper is_migration_disabled(p).
Fixes: e9fe182772 ("sched_ext: selftests/dsp_local_on: Fix sporadic failures")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes the
page allocator so we end up with the ability to allocate and free
zero-refcount pages. So that callers (ie, slab) can avoid a refcount
inc & dec.
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to use
large folios other than PMD-sized ones.
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance and
fixes for this small built-in kernel selftest.
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part of
the mapletree code.
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups.
- "simplify split calculation" from Wei Yang provides a few fixes and a
test for the mapletree code.
- "mm/vma: make more mmap logic userland testable" from Lorenzo Stoakes
continues the work of moving vma-related code into the (relatively) new
mm/vma.c.
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the page
allocator.
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue. It
should reduce the amount of unnecessary reading.
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated
(https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/).
Qi's series addresses this windup by synchronously freeing PTE memory
within the context of madvise(MADV_DONTNEED).
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests code
when optional compiler warnings are enabled.
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from David
Hildenbrand tightens the allocator's observance of __GFP_HARDWALL.
- "pkeys kselftests improvements" from Kevin Brodsky implements various
fixes and cleanups in the MM selftests code, mainly pertaining to the
pkeys tests.
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size.
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic.
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a tmpfs-based
kernel build was demonstrated.
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of zram_write_page().
A watchdog softlockup warning was eliminated.
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin Brodsky
cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed.
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging logic.
- "Account page tables at all levels" from Kevin Brodsky cleans up and
regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy.
- "mm/damon: replace most damon_callback usages in sysfs with new core
functions" from SeongJae Park cleans up and generalizes DAMON's sysfs
file interface logic.
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is presented in
response to DAMOS actions.
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park removes
DAMON's long-deprecated debugfs interfaces. Thus the migration to sysfs
is completed.
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from Peter
Xu cleans up and generalizes the hugetlb reservation accounting.
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface.
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting), but
also inclusion (allowing) behavior.
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
"introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to reduce
the size of struct page and to enable dynamic allocation of memory
descriptors."
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes and
simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel build
time with swap-on-zram.
- "mm: update mips to use do_mmap(), make mmap_region() internal" from
Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal.
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few MGLRU
regressions and otherwise improves MGLRU performance.
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae Park
updates DAMON documentation.
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing.
- "mm: hugetlb+THP folio and migration cleanups" from David Hildenbrand
provides various cleanups in the areas of hugetlb folios, THP folios and
migration.
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for pagecache
reading and writing. To permite userspace to address issues with
massive buildup of useless pagecache when reading/writing fast devices.
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZ5a+cwAKCRDdBJ7gKXxA
jtoyAP9R58oaOKPJuTizEKKXvh/RpMyD6sYcz/uPpnf+cKTZxQEAqfVznfWlw/Lz
uC3KRZYhmd5YrxU4o+qjbzp9XWX/xAE=
=Ib2s
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
