Convert the separately-allocated reorder_buf pointer to a C99 flexible
array member at the end of struct tid_ampdu_rx, with both the
sk_buff_head and the jiffies timestamp in each array element. This
collapses three allocations into one and removes the corresponding
kfree() pairs from the error and free paths.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260605005627.317194-1-rosenp@gmail.com
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When building with a version of clang that supports
'-fms-anonymous-structs' (which will be used by the kernel instead of
the wider '-fms-extensions'), there are a couple warnings after some
recent mesg_hwmp.c changes:
net/mac80211/mesh_hwmp.c:373:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
373 | struct ieee80211_mesh_hwmp_preq_top *preq_elem_top =
| ^
net/mac80211/mesh_hwmp.c:390:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
390 | struct ieee80211_mesh_hwmp_prep_top *prep_elem_top =
| ^
2 errors generated.
Enclose the switch case blocks in braces to clear up the warning.
Fixes: a91c65cb99 ("wifi: mac80211: Use struct instead of macro for PREP frame")
Fixes: 4ac20bd40b ("wifi: mac80211: Use struct instead of macro for PREQ frame")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260604-mac80211-mesh_hwmp-fix-c23-extensions-v1-1-25a64d6ce541@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This pull request contains iwlwifi features and cleanups. Notably:
- Bump max core version for BZ/SC/DR to 106.
- Add KUnit tests for link grading, RSSI adjustment, and beacon
handling;
- Drop core101 support and remove TLC config v4/v5 compatibility code.
- Fixes:
Fix PCIe write pointer detection
Fix STEP_URM register address
Remove unneeded WoWLAN warning
reduce NIC wakeups during dump.
Revert MODULE_FIRMWARE relocation change
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCaiA4nQAKCRDacY7uyt+O
fcECAQC8YSlz1duQiMiuLTQ1WJ55yG8hncvPlgvUwEUHD8E/wgEAgjHPS566XWfU
/H4pc3CEZT+w8LRHhvvJiYWXpmmnvgs=
=+5Cu
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-2026-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
wifi: iwlwifi-next : updates - 2026-06-03
This pull request contains iwlwifi features and cleanups. Notably:
- Bump max core version for BZ/SC/DR to 106.
- Add KUnit tests for link grading, RSSI adjustment, and beacon
handling;
- Drop core101 support and remove TLC config v4/v5 compatibility code.
- Fixes:
Fix PCIe write pointer detection
Fix STEP_URM register address
Remove unneeded WoWLAN warning
reduce NIC wakeups during dump.
Revert MODULE_FIRMWARE relocation change
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ath12k, add driver support for WDS mode.
In ath11k and ath12k, a number of cleanups and minor bug fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCah7oAwAKCRAsFbugiYzL
e4FRAQDP7XeGi3lDh02TlRthSY1z1fw8dTnUoHrok3MozxwGrQEAztgSQg1wjERh
PAKcUibVH/ebQf5MHziPl+/ZR24RCwM=
=iZG5
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20260602' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v7.2 (PR #3)
In ath12k, add driver support for WDS mode.
In ath11k and ath12k, a number of cleanups and minor bug fixes.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware version number check for IGTK introduced in
commit c34dbc5900 ("wifi: wlcore: Add support for IGTK key")
lets the amount of ciphers decrease on every boot of a too old firmware and
that is practically happening. It also does not take into account other
chips than the wl18xx. On some wl128x, the following can be observed
when connecting via nm to a common ap:
[ 484.113311] wlcore: WARNING could not set keys
[ 484.117828] wlcore: ERROR Could not add or replace key
[ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5)
[ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142
[ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1
[ 484.145721] wlcore: down
[ 484.148986] ieee80211 phy0: Hardware restart was requested
[ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142)
[ 484.633758] wlcore: Association completed.
[ 484.690490] wlcore: ERROR command execute failure 14
[ 484.690490] ------------[ cut here ]------------
[ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892
This repeats endlessly.
Always disable IGTK on wl12xx and fix the decrementing mess.
Fixes: c34dbc5900 ("wifi: wlcore: Add support for IGTK key")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260604103316.377251-1-andreas@kemnade.info
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit d594cc6f2c ("wifi: mac80211: restore non-chanctx injection
behaviour") restored the monitor injection fallback for drivers using
chanctx emulation but explicitly deferred drivers that transitioned
to real chanctx ops. mt76 falls in that category and still drops
every injected frame when monitor coexists with another interface.
When the monitor has no chanctx of its own, fall back to the only
chanctx in flight if there is exactly one. Refuse if multiple are
present: picking arbitrarily would inject on an unrelated channel.
Emulated and real chanctx drivers both flow through this fallback,
since emulation always presents zero or one chanctx in
local->chanctx_list.
Reran the airgeddon evil-twin flow (hostapd AP + coexisting monitor
VIF on the same phy + aireplay-ng deauth from the monitor) on
mt7921e PCIe and mt7921u USB across 2.4 GHz and 5 GHz, and on a
Kali VM with MT7921U passthrough as the closest match to the
original reporter's setup. None reproduced the hang seen against
the earlier attempt at this fix
(<20251216111909.25076-2-johannes@sipsolutions.net>) or against v1
on lore in March.
Cc: <stable+noautosel@kernel.org> # causes some older drivers to crash
Reported-by: Oscar Alfonso Diaz <oscar.alfonso.diaz@gmail.com>
Closes: https://github.com/morrownr/USB-WiFi/issues/682
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: 傅继晗 <fjhhz1997@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/5c2760bd9bc34616bf7892848872522254dd1ce5.1780513445.git.lucid_duck@justthetip.ca
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add tests for PSD/EIRP RSSI adjustment which compensates measurements
when APs use PSD-based power scaling with bandwidth.
Tests cover all power types, bandwidths, and limiting scenarios.
Signed-off-by: Avinash Bhatt <avinash.bhatt@intel.com>
Link: https://patch.msgid.link/20260531135036.a18b8d0acd62.I68dfcc17359ab8a5abdc84e1e21db4ad1671af41@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
FW core102 bumped TLC_MNG_CONFIG_CMD_API_S from version 5 to
version 6. The v4 and v5 compatibility paths in
iwl_mld_send_tlc_cmd() are no longer reachable on any supported
firmware.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260531135036.c0e2dbfd0569.I44f8eb4d985bb9590b65b77e9a3dd157e4bd5e79@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
We don't acually need to always check the return value. For example, if
we send a command to remove an object - we can assume success
(if it fails it is probably because the fw is dead, and then it doesn't
have the object anyway).
Remove the annotations.
Link: https://patch.msgid.link/20260531135036.434473c7b29a.I455e0c3f93c25635df708da7d3216c183dbdbbbb@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
BZ, DR and SC no longer need to accept core101 firmware.
Raise the minimum supported firmware core from 101 to 102 so
these families only match supported core102 and newer images.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260531135036.4ece89be11a9.If00f9c7e011ec75219d28a38ca2077a926afc70e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
FW core102 removed both DC2DC_CONFIG_CMD_API_S and
DC2DC_CONFIG_CMD_RSP_API_S. The only driver-side artifact is
enum iwl_dc2dc_config_id in fw/api/config.h, which has no
callers in any .c file across all driver paths (mld/mvm/xvt).
Remove the dead definition.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260531135036.487ceed62714.I13cf8cc214c68899379112e8e52f0cd38dc7b6f8@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Ever since the TFD queue size is no longer limited to 256 entries,
this code has been wrong, and might erroneously not detect a move
if it was by a multiple of 256. Not a big deal, but fix it while
I see it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260531135036.87ffbeab298e.I4fae41383b6756bccbed250985e0521b68a40d0c@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Our binding handling for P2P-Device can run into the following
scenario, as observed by our testing:
- a station interface is connected on some channel
- the P2P-Device does a remain-on-channel (ROC) on that channel
- the ROC ends, and the P2P-Device is removed from the binding,
but the phy_ctxt pointer is left around as a PHY cache so we
don't need to recalibrate to the channel again and again in
case it's not shared
- a binding update by the station interface, even a removal,
will re-add the P2P-Device to the binding
- the P2P-Device is removed, which removes the PHY context, but
it's still in the binding so the firmware crashes
Since the P2P device is removed from the binding and only re-
added by unrelated code, but we want to keep the phy_ctxt around
as a cache for future ROC usage, fix it by adding a boolean that
indicates whether or not the P2P-Device should be added to the
binding, and handle that in the binding iterator. That way, the
station interface cannot re-add the P2P-Device to the binding
when that isn't active.
Assisted-by: Github Copilot:claude-opus-4-6
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.07f94335ae06.I384238b0859343c4a9a9dda20682be1aad89cc9d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260527230313.19720967372b.Iff30814510a26f9f609f98eeea3111c50c1afb31@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
IWL_BZ_UCODE_CORE_MAX is undefined in cfg/rf-fm.c, this
causes __stringify(core) to turn it into the literal
token text, so MODULE_FIRMWARE entries are generated as
"iwlwifi...-cIWL_BZ_UCODE_CORE_MAX.ucode",
instead of the actual number.
This reverts the commit below.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260527230313.a10bc3359dca.I446a1340c635f07aff3efaba5317635e010c156f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
While associated to MLD AP with active EMLSR, set all scan
operations as fast-balance scans. The only exception is when a
fragmented scan is planned (high traffic or low latency), in
which case the fragmented scan is preserved.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20260527230313.32d278842b0e.Ia3d73e4085eefc4d3921e93de4107b2d6a6f922e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Add a new FW TLV (IWL_UCODE_TLV_FW_NAN_MAX_CHAN_SWITCH_TIME) that
allows the firmware to specify the NAN maximum channel switch time
in microseconds.
When the TLV is present, use its value for the NAN device capability.
Otherwise, fall back to the default of 4 milliseconds.
Signed-off-by: Israel Kozitz <israel.kozitz@intel.com>
Link: https://patch.msgid.link/20260527230313.e8ae1a3adacd.I15b933407ca3974a65047b63b4f9b00bed3520fb@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
The mimo field of the sta command is badly named. It really carries the
initial SMPS value as it is in the association request of the client
station (when we are the AP).
In NAN we don't have this information, just mark SMPS as disabled.
Link: https://patch.msgid.link/20260527230313.abd136be474e.I9eb663d953b482236345ffbcb611f28facea83c1@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Given that we now use v3 rates with FW index throughout,
_to_hwrate() is confusing, since the hardware still uses
the PLCP value, the driver just doesn't see that now (as
it talks to firmware, not hardware.)
Rename this to iwl_mvm_rate_idx_to_fw_idx() to more
clearly indicate what it's doing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.a60c8aea5b6c.I6af48d5d9748e184eed9d3437d312291cab61d7f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
We dereference the mld_sta pointer before checking for NULL.
But we do check the sta pointer, and sta != NULL means mld_sta != NULL,
so there is no real issue.
Fix it anyway to silence the warning.
Link: https://patch.msgid.link/20260527200512.506707-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Currently, the dump code attempts to dump any number of
memories and register banks, as defined by the firmware.
Especially when the device is failing, this can lead to
excessive time spent attempting to acquire NIC access
over and over again.
Improve the code to only attempt to acquire NIC access
once or twice, but using the new memory dump functions
that may drop the spinlock etc. Mark all dump regions
that require NIC access, and skip them if we couldn't
obtain that.
In order to avoid CPU latency due to the increased time
holding the spinlock (and possibly disabling softirqs),
drop locks and call cond_resched() after each section
(if holding NIC access) but don't release HW NIC access.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.bec886142cc8.I41f2eaf2403b38147504d5dab0a7414de2699adc@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
AX231 is a device that is based on AX211 that doesn't support 6E and
its bandwidth is limited to 80 MHz.
Just reuse the radio config from AX203 which has the exact same
characteristics.
It has a specific subdevice ID to allow the driver to differentiate
between AX211 and AX231.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260512082114.0685ed313987.Ibcfa24e196ac778405d2843f0984b66ca167704e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Pull-request includes many random fixes and new features.
Major changes are listed below:
rtl8xxxu:
* declare supported channel width by firmware report
rtw88:
* validate RX descriptor to avoid malformed data causing warnings
rtw89:
* support USB devices RTL8922AU
* add sysfs entry to show SN and UUID for specific USB devices
* support to switch USB 3.0 mode for higher performance
* add more fields (mainly SIG-A/SIG-B) to radiotap in monitor mode
* offload packed IO to firmware to reduce IO time (for USB devices)
* add debugfs to diagnose BB healthy
* more preparations for RTL8922DE
-----BEGIN PGP SIGNATURE-----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=7iaf
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2026-06-03' of https://github.com/pkshih/rtw
Ping-Ke Shih says:
==================
rtw-next patches for -next
Pull-request includes many random fixes and new features.
Major changes are listed below:
rtl8xxxu:
* declare supported channel width by firmware report
rtw88:
* validate RX descriptor to avoid malformed data causing warnings
rtw89:
* support USB devices RTL8922AU
* add sysfs entry to show SN and UUID for specific USB devices
* support to switch USB 3.0 mode for higher performance
* add more fields (mainly SIG-A/SIG-B) to radiotap in monitor mode
* offload packed IO to firmware to reduce IO time (for USB devices)
* add debugfs to diagnose BB healthy
* more preparations for RTL8922DE
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In AP mode, track the BSS non-DBE bandwidth and apply
that to all non-DBE clients, then track OMP updates
from the clients and enable/disable DBE accordingly.
For now don't send a response, clients need to have a
timer anyway (it's up to the driver to set the right
timeout in UHR capabilities.)
Link: https://patch.msgid.link/20260529102644.be84f2b055cc.I4d2c067dfe54c47621d5a872ca07a0e754d6c20f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's similar code in two places in HT and HE, and we need to add
the same again for UHR. Rename ieee80211_link_sta_rc_update_omi()
to ieee80211_link_sta_update_rc_bw() and move it to sta_info.c and
update existing code that can use it to do so.
Link: https://patch.msgid.link/20260529102644.577c2f304d33.I09df4fce83c4e3e6deddfecbea74ffdbeedb4927@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
UHR requires MLO, not just formally but also in order
for the client to understand AP BSS parameter changes,
since the Critical Update Counter is inside the Multi-
Link Element. Require MLO for UHR connections to avoid
otherwise needed complexity such as not enabling any
feature that would require tracking critical updates.
Link: https://patch.msgid.link/20260529102644.43817ce87042.If4562ae9c5ca83339b397d9a344b68631cb17c4a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
During beacon processing, the parser is always called with
a BSS to find the correct multi-BSSID profile (if any) and
therefore never attempts to parse a multi-link element.
This means the code to handle cross-link CSA can effectively
never do anything.
Fix this by parsing the multi-link element in the regular
parser as well.
Fixes: 7ef8f6821d ("wifi: mac80211: mlme: handle cross-link CSA")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260529102644.2a74b2659f50.I8f9454bf5e05c419a9b1eb23ecad302a6bf63fbb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A previous commit changed mac80211 to no longer make wrong
calls to cfg80211_defragment_element() with the element
pointing outside of the buffer. Additionally, harden this
function itself against that and always return -EINVAL in
case the element isn't inside the source buffer.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://patch.msgid.link/20260529102644.198945754054.I5ae8fdebf9008abc6e15d0b0f10c3a7b73d02eab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When connected to a non-transmitting BSS of multiple BSSID
set with EMA, the correct profile for the connection isn't
always present in the beacon. Indicate this in the parser
and use the information to not check everything in beacon
processing, since the information might not be correct if
taken only from the transmitted BSS.
Link: https://patch.msgid.link/20260529102644.97527a7dfd7b.Iecd0ef578b85a5a0057538cfff5fdff41d19b7ea@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are multiple cases where interface links are removed
and the station links need to be removed with them, e.g.
in mlme.c we have both received and transmitted multi-link
reconfiguration, doing the two things in different order,
the former deleting STA links when the vif link change may
still fail.
It's also not clear that userspace (hostapd) couldn't, at
least in theory, remove a link from an interface without
removing the station links first, or even leave stations
that aren't MLO-capable, using that link.
Unify this code into ieee80211_vif_update_links() so that
it always happens, always happens in the right order and
is transactional (i.e. failures are handled correctly.)
Link: https://patch.msgid.link/20260529102644.c352f73a4658.I7219a5d72dab2abcecea9b5c52e7eb7a50e68d9b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
