Avoid calls to strcpy().
The lengths of the strings have been used for the kzalloc(), replace
the strcpy() calls with memcpy() using the known lengths.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Link: https://patch.msgid.link/20260608185121.22331-1-david.laight.linux@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Provide good/ and bad/ DTS and YAML fixtures plus a small runner that
feeds them to dt-check-style and diffs the output against expected
text files. Wired into a new top-level dt_style_selftest make target
so the suite can be exercised independently of the full tree.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/80fec5d2cfcdee0f9c5e2d4921ebbd4115d392b7.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Run dt-check-style as part of dt_binding_check_one. The recipe wraps
the tool with scripts/jobserver-exec so worker count follows the GNU
make jobserver -- `make -j N dt_binding_check` constrains the checker
to N workers rather than spawning one per CPU.
Default mode (relaxed) is zero-violation on the current tree, so this
does not introduce new warnings into make dt_binding_check. Stricter
rules are available via --mode=strict (eg. for use by checkpatch.pl in
a future series).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/a14fdbded0acdc4fef1c1278100f2f4c6a93a488.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
main() called JobserverExec().run() and discarded its return value,
then the script exited with the implicit status 0. As a result, any
Makefile that wired a build step through jobserver-exec saw the step
silently succeed even when the wrapped command had failed.
Two in-tree callers were affected:
Documentation/devicetree/bindings/Makefile
cmd_chk_style runs a python checker via jobserver-exec and uses
"&& touch $@ || true" so failures leave the stamp file untouched
and the next make rerun reports them again. The swallowed exit
code made the stamp file get created even on failure, caching the
failed run and hiding the reported issues until the inputs change.
scripts/Makefile.vmlinux_o
cmd_gen_initcalls_lds runs scripts/generate_initcall_order.pl via
jobserver-exec; a perl failure was masked by the wrapper.
Return the subprocess exit code from main() and pass it to sys.exit()
so the wrapped command's status reaches make.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/660368ca16e2d3845577a9fd157d2f37f0e09e85.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a Python tool that checks DTS coding style on examples in YAML
binding files and on .dts/.dtsi/.dtso source files. Rules are kept in
a small declarative registry, each tagged 'relaxed' (default; must be
zero-violation on the current tree) or 'strict' (opt-in for new
submissions). Promoting a rule from strict to relaxed is a one-line
edit once the tree is clean.
Relaxed mode covers trailing whitespace, tab characters in YAML
examples, mixed tab+space indents, and missing tabs in .dts files.
Strict adds indent unit and consistency checks, blank-line placement,
sibling address ordering, "compatible" and "reg" ordering, and unused
labels.
The tool reads file paths from @argfile and parallelises across CPUs
via -j N. With no -j given it picks up $PARALLELISM (set by
scripts/jobserver-exec from the GNU make jobserver) and falls back to
os.cpu_count() otherwise. Running as one Python invocation amortises
the ruamel.yaml import across the whole tree -- ~2s on a 32-CPU host
vs ~28s sequential.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/224923f3d1c73ff55cebb3e0796f119e32c1bb43.1779908995.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
In __of_find_n_match_cpu_property(), checking the variable ac for 0 won't
prevent a possible overflow when multiplying it by sizeof(*cell). Besides,
of_read_number() (called in the *for* loop) can't return correct result if
that variable (which equals the #address-cells prop's value) exceeds 2, so
additionally checking for that seems logical...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: f3cea45a77 ("of: Fix iteration bug over CPU reg properties")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Link: https://patch.msgid.link/0c7bf7e9-887c-42d5-bcfb-0ba7fe1e70b6@auroraos.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document common video interface device properties, such as rotation and
orientation.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260531092924.12929-2-clamor95@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document the Samsung SOFEF01-M Display-Driver-IC and 1080x2520@60Hz
command-mode DSI panels found in many Sony phones:
- Sony Xperia 5 (kumano bahamut): amb609tc01
- Sony Xperia 10 II (seine pdx201): ams597ut01
- Sony Xperia 10 III (lena pdx213): ams597ut04
- Sony Xperia 10 IV (murray pdx225): ams597ut05
- Sony Xperia 10 V (zambezi pdx235): ams605dk01
- Sony Xperia 10 VI (columbia pdx246): ams605dk01
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://patch.msgid.link/20251222-drm-panels-sony-v2-4-82a87465d163@somainline.org
[robh: move vci-supply property to top-level]
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the TI OMAP Dynamic Memory Manager (DMM) dt binding
from text format to DT schema.
During conversion following changes were made:
- Move file from /bindings/arm/omap to /bindings/soc/ti/
- Make the 'ti,hwmods' property optional and mark it deprecated as it is
no longer used, it is kept to support legacy dtbs.
- Add the missing required property 'interrupts' to example node.
Signed-off-by: Bhargav Joshi <j.bhargav.u@gmail.com>
Link: https://patch.msgid.link/20260605-ti-omap-dmm-v2-1-1b460742ec83@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The global pointer 'reserved_mem' continues to reference the
reserved_mem_array which lives in __initdata if
alloc_reserved_mem_array() fails. of_reserved_mem_lookup() is
exported for post-init use, that would dereference freed memory
and trigger a use-after-free.
So reset reserved_mem_count to 0 when alloc_reserved_mem_array()
fails.
Fixes: 00c9a452a2 ("of: reserved_mem: Add code to dynamically allocate reserved_mem array")
Signed-off-by: Wandun Chen <chenwandun@lixiang.com>
Link: https://patch.msgid.link/20260604015332.3669384-1-chenwandun1@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The "ibm,phandle" thing only seems to be needed on pseries
machines but everyone gets it so they get a string and a little
bit of useless code.
In __of_attach_node() the pseries specific part uses
IS_ENABLED(CONFIG_PPC_PSERIES) so do that here too.
Signed-off-by: Daniel Palmer <daniel@thingy.jp>
Link: https://patch.msgid.link/20260603151809.3256280-1-daniel@thingy.jp
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible string for the AuxADC block found on the MT6365 PMIC,
that is compatible with the one found in MT6359.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260429-mediatek-genio-mt6365-cleanup-v1-4-6f43838be92f@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible string for the pmic keys block found on the MT6365 PMIC,
that is compatible with the one found in MT6359.
Signed-off-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260429-mediatek-genio-mt6365-cleanup-v1-3-6f43838be92f@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Certain Samsung S2M series PMICs have a MUIC device which reports
various cable states by measuring the ID-GND resistance with an internal
ADC. Document the devicetree schema for this device.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Link: https://patch.msgid.link/20260516-s2mu005-pmic-v7-2-73f9702fb461@disroot.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
A /reserved-memory child node may have multiple <base size> tuples in
'reg' property, but multiple entries in 'reg' have never been fully
functional:
- fdt_scan_reserved_mem() in the early pass loops over every
tuple and reserves them all.
- fdt_scan_reserved_mem_late() reads 'reg' by
of_flat_dt_get_addr_size(), which returns false if entries != 1.
So 'reg' property with multiple <base size> entries will be
skipped, no reserved_mem entry is created in reserved_mem[].
Supporting multiple <base size> tuples is not a good idea:
- It requires reserved_mem_ops->node_init support. Currently,
CMA(rmem_cma_setup) and DMA(rmem_dma_setup) are not supported.
- of_reserved_mem_lookup() is name-based, only the first entry in
multiple <base size> tuples will be found.
So change to support one <base size> entry in 'reg' property.
Also update dt binding:
https://github.com/devicetree-org/dt-schema/pull/197
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wandun Chen <chenwandun@lixiang.com>
Tested-by: Meijing Zhao <zhaomeijing@lixiang.com>
Link: https://lore.kernel.org/all/20260506014752.GA280279-robh@kernel.org/
Link: https://patch.msgid.link/20260525121700.2706141-1-chenwandun1@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add freescale 2.4 GHz IEEE® 802.15.4/ZigBee mc1323 to fix the below
CHECK_DTBS warnings.
arch/arm/boot/dts/nxp/imx/imx53-smd.dtb: /soc/bus@50000000/spba-bus@50000000/spi@50010000/mc1323@0: failed to match any schema with compatible: ['fsl,mc1323']
Since the i.MX53 platform is more than 20 years old, it is difficult to
find detailed information about how the MC1323 was used on the i.MX53 SMD
board, as the functionality depended on firmware.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260522203810.832631-1-Frank.Li@oss.nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add television encoder (TVE) for legacy i.MX53 (over 15 years) to fix below
DTB_CHECK warnings:
arch/arm/boot/dts/nxp/imx/imx53-ard.dtb: /soc/bus@60000000/tve@63ff0000: failed to match any schema with compatible: ['fsl,imx53-tve']
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260521193734.1496372-1-Frank.Li@oss.nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The "sram" property has become a de facto standard property, so create a
common schema for it and drop all the duplicated definitions.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com> #fsl,imx8qxp-dc-command-sequencer.yaml
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> # display/msm
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://patch.msgid.link/20260511165942.2774868-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The unfortunately named 'phandle-array' property type is really a matrix
with phandle and fixed arg cells entries. A matrix property should have 2
levels of items constraints.
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260507201749.2605365-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Live-tree reconfiguration properties also carry raw values plus explicit
lengths. `of_reconfig_get_state_change()` currently treats `status`
property values as NUL-terminated strings and feeds them straight into
`strcmp()`.
Factor the `"okay"` / `"ok"` check out into a helper that first verifies
that the property contains a bounded C string within `prop->length`.
Malformed `status` updates should be treated as not enabling the node.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260507081812.91838-2-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
`populate_properties()` stores live-tree property values as raw byte
sequences plus a separate `length`. They are not globally guaranteed to
be NUL-terminated.
`of_prop_next_string()` iterates string-list properties by walking raw
bytes, `__of_node_is_type()` checks `device_type`,
`__of_device_is_status()` checks `status`, and
`of_alias_from_compatible()` reads the first `compatible` entry. These
paths must validate that the relevant string fits within the property
bounds before they hand it to C string helpers.
Validate these live-tree string properties within their declared bounds.
In particular, make `of_prop_next_string()` reject malformed entries
before returning them, keep the `device_type` check inside the existing
no-lock helper path, and add unit coverage for malformed first and
trailing string-list entries.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260507081812.91838-1-pengpeng@iscas.ac.cn
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Lists should have fixed constraints, because binding must be specific in
respect to hardware. Add missing constraints to number of iommus in
Mediatek media devices and remove completely redundant and obvious
description.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250821065900.17430-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add deprecated property 'port' and 'display-timings' for i.MX5 SoCs (over
15 years) to fix below CHECK_DTBS warnings:
arm/boot/dts/nxp/imx/imx51-apf51dev.dtb: disp1 (fsl,imx-parallel-display): 'display-timings', 'port' do not match any of the regexes: '^pinctrl-[0-9]+$'
from schema $id: http://devicetree.org/schemas/display/imx/fsl,imx-parallel-display.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260511220924.1905571-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Document Power Domain Controller on Qualcomm Nord SoC.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260504080703.825328-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Qualcomm Oryon 1-5 is found on Nord SoC. Add compatible for it.
$ cat /proc/cpuinfo
...
CPU implementer : 0x51
CPU architecture: 8
CPU variant : 0x5
CPU part : 0x001
CPU revision : 4
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427004619.229843-1-shengchao.guo@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the ST Nomadik boards binding from free-form text to DT schema.
The binding documents the Nomadik NHK15/USB-S8815 platform compatibles.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Andrew Rembrandt <kernel@rembrandt.dev>
Link: https://patch.msgid.link/20260507-dt-bindings-arm-st-nomadik-yaml-v2-1-8ab05d1cda96@rembrandt.dev
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
DTS patches were always expected to be either sent separately or put at
the end of patchset, but the first part rule explaining it used a
"should be placed at the end of patchset" phrase which might create
wrong impression. This part "should be" was about order of the patches
and applied only to the case when DTS is combined into this patchset.
Suggested-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428150420.121472-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
YAML literal block scalars cannot use tabs for indent.
Replace tab separators (mostly between values and trailing /* ... */
comments) with single spaces.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/2044ee0cac191c7be8b6e989fc3c99b24aa4cc5e.1777434096.git.daniel@makrotopia.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Extend the guidelines when to use fallback compatibles to cover to
common review responses. Devices are most likely compatible and should
use fallbacks when having:
1. Compatible programming interface, meaning one is a subset, and Linux
device drivers can use the subset to correctly match/bind and still
operate with the subset features.
2. Device variant discovery through some means, like registers.
Devices are incompatible and fallback is not suitable when that
fallback cannot be used by the drivers to match/bind. In the same time
commit message should clearly explain when the code suggests devices
are compatible, but the binding does not define them as such.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427160739.175451-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Now that memblock and slab allocators are the only allocators and both
return zero-initialized memory, zeroing the memory ourselves is
redundant. The allocators used are:
- kernel_tree_alloc uses kzalloc()
- early_init_dt_alloc_memory_arch() and dt_alloc_memory() both use
memblock_alloc()
Remove redundant memset after the allocation. No funtional change.
Signed-off-by: Sang-Heon Jeon <ekffu200098@gmail.com>
Link: https://patch.msgid.link/20260418140420.2221736-1-ekffu200098@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The 'wakeup-source' property already has its type defined in the core
schema. Remove the redundant 'type: boolean' from the binding file to
clean up the binding files.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260417021858.6582-1-phucduc.bui@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add compatible for Eliza SoC IMEM.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Link: https://patch.msgid.link/20260418-eliza-imem-v3-2-bfbd499b6e77@pm.me
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
SSD2825 being RGB-DSI bridge should inherit dsi-controller properties same
way other DSI controllers and DSI bridges do.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260417064657.20293-2-clamor95@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----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=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----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=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode
-----BEGIN PGP SIGNATURE-----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=mY/t
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
mentioning separately: Rafael's commit converting tpm_crb from ACPI driver
to a platform driver. Starting from this release cycle, the branch with TPM
changes mirrored to next is 'for-next-tpm', and patches for keys have their
own separate 'for-next-keys' branch.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaezVbgAKCRAaerohdGur
0ggHAQDmhaZ2C3ddAV1WjfXh1YqdWAmqEqoP7ZHAh4OrjyRPTQD+Pc4xl9TSOgHx
/9WzzV6AM6fL5RuC2/PO5RvOKF9mswc=
=tpJM
-----END PGP SIGNATURE-----
Merge tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736a ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Several development updates for 7.1-rc1:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
-----BEGIN PGP SIGNATURE-----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=arB6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of
the saved ring buffer. This is because the ring buffer being read by
user space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other accounting
as well. On boot up, the "reader page" is accounted for but a rewind may
put it back into the buffer and then the reader page may be accounted
for again.
Save off the original reader page and skip accounting it when scanning
the pages in the ring buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaevLRxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsNBAQCO9T+3kbDLD/DxRBYjeMXhTg2iY2OV
SHV9jEzcYTahmwEAqVCFY9sNxVYXait/C924SmHCSi1N0HrIuEzIEd29iwk=
=bv+t
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of the
saved ring buffer. This is because the ring buffer being read by user
space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other
accounting as well. On boot up, the "reader page" is accounted for
but a rewind may put it back into the buffer and then the reader page
may be accounted for again.
Save off the original reader page and skip accounting it when
scanning the pages in the ring buffer.
* tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not double count the reader_page
