The Lenovo IdeaCentre Mini X (Snapdragon) Desktop is a Hamoa-based
ultracompact desktop PC. It provides HDMI, DisplayPort, USB Type-C
display outputs, 5 additional USB ports, Ethernet, dual NVME slots,
headphone jack, WiFi, and Bluetooth.
Introduce a DeviceTree describing this device.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260401-ideacentre-v2-2-5745fe2c764e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Lenovo IdeaCentre Mini X (Snapdragon) Desktop is a Hamoa-based
ultracompact desktop PC. It provides HDMI, DisplayPort, USB Type-C
display outputs, 5 additional USB ports, Ethernet, dual NVME slots,
headphone jack, WiFi, and Bluetooth.
Document the compatible for this device.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260401-ideacentre-v2-1-5745fe2c764e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Audio amplifier TFA9890 is present on the board.
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-axolotl-misc-p1-v3-3-8934e9db6831@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Sets a higher rate than the default for good responsiveness of
touchscreen.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-axolotl-misc-p1-v3-2-8934e9db6831@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SHIFT6mq features an sdcard slot, add it.
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-axolotl-misc-p1-v3-1-8934e9db6831@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add clocks which need to be enabled for configuring QoS on
talos SoC.
Signed-off-by: Odelu Kukatla <odelu.kukatla@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311103548.1823044-4-odelu.kukatla@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable IMX577 via CCI on Talos EVK Core Kit.
The Talos EVK board does not include a camera sensor
by default. This DTSO has enabled the Arducam 12.3MP
IMX577 Mini Camera Module on the CSI-1 interface.
CSI-1 interface using mclk2 as the MCLK source on this board.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-5-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add node for the SM6150 camera subsystem.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260305-sm6150_evk-v6-2-38ce4360d5e0@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
All the existing variants Talos boards are using Gunyah hypervisor
which means that, so far, Linux-based OS could only boot in EL1 on
those devices. However, it is possible for us to boot Linux at EL2
on these devices [1].
When running under Gunyah, the remote processor firmware IOMMU streams
are controlled by Gunyah. However, without Gunyah, the IOMMU is managed
by the consumer of this DeviceTree. Therefore, describe the firmware
streams for each remote processor.
Add a EL2-specific DT overlay and apply it to Talos IOT variant
devices to create -el2.dtb for each of them alongside "normal" dtb.
[1]
https://docs.qualcomm.com/bundle/publicresource/topics/80-70020-4/boot-developer-touchpoints.html#uefi
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260127-talos-el2-overlay-v2-3-b6a2266532c4@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the device tree for the QCS615-based Talos EVK platform. The
platform is composed of a System-on-Module following the SMARC
standard, and a Carrier Board.
The Carrier Board supports several display configurations, HDMI and
LVDS. Both configurations use the same base hardware, with the display
selection controlled by a DIP switch.
Use a DTBO file, talos-evk-lvds-auo,g133han01.dtso, which defines an
overlay that disables HDMI and adds LVDS. The DTs file talos-evk
can describe the HDMI display configurations.
According to the hardware design and vendor guidance, the WiFi PA
supplies VDD_PA_A and VDD_PA_B only need to be enabled at the same time
as asserting WLAN_EN.
On this platform, WiFi enablement is controlled via the WLAN_EN GPIO
(GPIO84), which also drives the VDD_PA_A and VDD_PA_B power enables.
Remove the VDD_PA_A and VDD_PA_B regulator nodes from the device tree
and rely on WLAN_EN to enable WiFi functionality.
Add talos-evk-usb1-peripheral.dtso overlay to enable USB0 peripheral
(EDL) mode. The base DTS will keep USB0 host-only due to hardware
routing through the EDL DIP switch, and the overlay switches the
configuration for device-mode operation.
The LVDS backlight hardware has been updated to use a simplified
design. The backlight enable signal is now permanently pulled up
to 3.3V and is no longer controlled via GPIO59.
Remove the GPIO59 based backlight configuration from the device
tree, as it is no longer routed to the LVDS interface.
The initial device tree includes support for:
- CPU and memory
- UART
- GPIOs
- Regulators
- PMIC
- Early console
- AT24MAC602 EEPROM
- MCP2515 SPI to CAN
- ADV7535 DSI-to-HDMI bridge
- DisplayPort interface
- SN65DSI84ZXHR DSI-to-LVDS bridge
- Wi-Fi/BT
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
Link: https://lore.kernel.org/r/20260331060107.501561-4-tessolveupstream@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The USB PHY nodes has inconsistent labels as 'usb_1_hsphy'
and 'usb_hsphy_2' across talos.dtsi and qcs615-ride.dts.
This patch renames them to follow a consistent naming
scheme.
No functional changes, only label renaming.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331060107.501561-3-tessolveupstream@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add binding support for the Qualcomm Technologies, Inc. Talos EVK
SMARC platform based on the QCS615 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sudarshan Shetty <tessolveupstream@gmail.com>
Link: https://lore.kernel.org/r/20260331060107.501561-2-tessolveupstream@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable GPU for qcs615-ride platform and provide path for zap
shader.
Signed-off-by: Jie Zhang <quic_jiezh@quicinc.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-4-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Unlike the CPU, the GPU does not throttle its speed automatically when it
reaches high temperatures.
Set up GPU cooling by throttling the GPU speed when it reaches 105°C.
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260312-qcs615-spin-2-v8-3-fca38edcd6e6@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Wi-Fi now works with this patch, relevant firmware and
qcom,snoc-host-cap-skip-quirk
qcom,snoc-host-cap-skip-quirk has not been approved/merged in mainline,
so it is not included here.
ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001
ath10k_snoc 18800000.wifi: qmi fw_version 0x20060285 fw_build_timestamp 2020-10-12 23:35 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c4-00645-QCAHLSWMTPLZ-1.336037.2
ath10k_snoc 18800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc 18800000.wifi: kconfig debug 1 debugfs 1 tracing 0 dfs 0 testmode 0
ath10k_snoc 18800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc 18800000.wifi: htt-ver 3.83 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
ath10k_snoc 18800000.wifi: invalid MAC address; choosing random
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-11-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Also include other supporting msm drm nodes, gpio and backlight
Co-developed-by: Amir Dahan <system64fumo@tuta.io>
Signed-off-by: Amir Dahan <system64fumo@tuta.io>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-10-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the multicolor status LED in the phone's notch.
Signed-off-by: Amir Dahan <system64fumo@tuta.io>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-8-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
uart9 is debug serial on USB SBU1/2
UART RX is SBU1 and UART TX is SBU2 of the USB-C port).
1.8V Logic Level
Tested using pololu usb07a https://www.pololu.com/product/2585
and CH340 USB-UART
uart6 is bluetooth
Bluetooth: hci0: setting up wcn399x
Bluetooth: hci0: QCA Product ID :0x0000000a
Bluetooth: hci0: QCA SOC Version :0x40010214
Bluetooth: hci0: QCA ROM Version :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x02140201
Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
Bluetooth: hci0: QCA Downloading qca/judyln/crnv21.bin
Bluetooth: hci0: QCA setup on UART is completed
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-6-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add paths for Qualcomm firmware, including:
ipa, modem, venus, gpu
GPU and bluetooth are confirmed working, others may need more
testing/fixes
But regardless they will need the firmware paths specified here
and firmware added upstream before they will work, so might as well
get started on it now.
Signed-off-by: Paul Sajna <sajattack@postmarketos.org>
Link: https://lore.kernel.org/r/20260331-judyln-dts-v7-2-87217b15fefb@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The two Type-C ports found on Glymur CRD are DisplayPort alternate mode
capable. Everything is in place already for the USB, but for DisplayPort
the controllers need to be enabled.
So enable the related DisplayPort controller for each of these two
ports. Also define the supported link frequencies for each output.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260330-glymur-enable-displayport-v1-1-1543ad6dac3a@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This resolves the following error seen on the ASUS ROG Phone 3:
cpu cpu7: Voltage update failed freq=3091200
cpu cpu7: failed to update OPP for freq=3091200
Fixes: 8e0e8016cb ("arm64: dts: qcom: sm8250: Add CPU opp tables")
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260307-sm8250-cpu7-opp-v1-1-435f5f6628a1@pm.me
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The SM8550-HDK board may be connected to a Display Card external PCB,
which is identical to the already supported SM8650-HDK Display Card,
it provides a VTDR6130 display with Goodix Berlin Touch controller, see
also commit bc90f56a16 ("arm64: dts: sm8650-hdk: add support for the
Display Card overlay") for additional details.
Two overlays are added to support SM8550-HDK plus Display Card and
SM8550-HDK plus Display Card plus Rear Camera Card setups.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260311001238.4191034-1-vladimir.zapolskiy@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Samsung Galaxy Core Prime Verizon Wireless is a phone based on MSM8916.
They are similar to the other Samsung devices based on MSM8916 with only a
few minor differences.
The device trees contain initial support with:
- GPIO keys
- Regulator haptic
- SDHCI (internal and external storage)
- USB Device Mode
- UART (on USB connector via the SM5502 MUIC)
- WCNSS (WiFi/BT)
- Regulators
- QDSP6 audio
- Speaker/earpiece/headphones/microphones via digital/analog codec in
MSM8916/PM8916
- WWAN Internet via BAM-DMUX
- PMIC and charger
- Touchscreen
There are different variants of Core Prime, with some differences in
NFC and MUIC.
The common parts are shared in
msm8916-samsung-fortuna-common.dtsi and msm8916-samsung-rossa-common.dtsi
to reduce duplication.
Signed-off-by: Max McNamee <maxmcnamee@proton.me>
[Raymond: Refactor touchscreen and MUIC. Add commit messages.]
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260223220514.2556033-4-wonderfulshrinemaidenofparadise@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MUIC varies on fortuna/rossa devices, which could be either SM5502 or
SM5504. Move SM5504 from msm8916-samsung-rossa-common to
msm8916-samsung-fortuna-common and refactor MUIC.
Disable MUIC by default in msm8916-samsung-fortuna-common, and explicitly
specify them in each fortuna/rossa board.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260223220514.2556033-2-wonderfulshrinemaidenofparadise@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the Last Level Cache Controller (LLCC) for the SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260210021957.13357-4-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add and configure the necessary nodes to enable the front camera
(Samsung S5KJN1), connected to CSIPHY 3.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260319-fp5-s5kjn1-v3-2-9cf4b8c09567@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
As per DTS Coding Style, sort pinctrl subnodes by the "pins" property,
in preparation to add more pinctrl states.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260319-fp5-s5kjn1-v3-1-9cf4b8c09567@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the CCI I2C busses and add nodes for the EEPROMs found on the
camera that are connected there.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20260320-milos-cci-v2-3-1947fc83f756@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add TSENS thermal sensors to Qualcomm Eliza SoC among with thermal
zones. The TSENS is compatible with previous generations.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327101225.382493-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DT configuration follows other Samsung 5nm-based Qualcomm SOCs,
utilizing the same register layouts and clock structures.
However, DSI won't work properly for now until we submit dispcc fixes.
And some DSC enabled panels require DPU timing calculation fixes too.
(hdisplay / width timing round errors cause the fifo error)
Co-developed-by: Tianyu Gao <gty0622@gmail.com>
Signed-off-by: Tianyu Gao <gty0622@gmail.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Tested-by: White Lewis <liu224806@gmail.com> # HUAWEI Gaokun3
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260308064835.479356-5-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The onboard Wi-Fi / BT device, WCN3990, has a simple on-chip PMU, which
further spreads generated voltage. Describe the PMU in the device tree
and rewire Bluetooth and WiFi supply properties to use the PMU LDO
outputs instead of referencing the SoC regulators directly.
Verified against the datasheet.
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-wcn3990-pwrctl-sdm845-v1-2-3f5c34e3fdd0@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The onboard Wi-Fi / BT device, WCN3990, has a simple on-chip PMU, which
further spreads generated voltage. Describe the PMU in the device tree
and rewire Bluetooth and Wi-Fi supply properties to use the PMU LDO
outputs instead of referencing the SoC regulators directly.
Couldn't verify the swctrl GPIO thus omitted.
Assisted-by: Claude:claude-opus-4.6
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-wcn3990-pwrctl-sdm845-v1-1-3f5c34e3fdd0@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This is already defined in the gpu_zap_shader node in hamoa.dtsi,
there is no need to redefine it.
Signed-off-by: Tobias Heider <tobias.heider@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260328-zap-v1-2-f6810b9b4930@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Most qcom DTs were converted to use the gpu_zap_shader label instead
of patching the gpu node in commit 2377626fd2 ("arm64: dts: qcom:
add gpu_zap_shader label"). This fixes the remaining ones.
Signed-off-by: Tobias Heider <tobias.heider@canonical.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260328-zap-v1-1-f6810b9b4930@canonical.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The monaco-evk mezzanine connector supports a robot expansion board that
requires UART6, which is currently disabled. This prevents the expansion
board from exchanging data and control commands.
Enable UART6 and assign the serial2 alias to provide stable device
enumeration for the expansion board.
Signed-off-by: Canfeng Zhuang <canfeng.zhuang@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327083101.1343613-3-canfeng.zhuang@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
