arm64: dts: qcom: sdm845-google: Describe Wi-Fi/BT properly

The onboard Wi-Fi / BT device, WCN3990, has a simple on-chip PMU, which
further spreads generated voltage. Describe the PMU in the device tree
and rewire Bluetooth and Wi-Fi supply properties to use the PMU LDO
outputs instead of referencing the SoC regulators directly.

Couldn't verify the swctrl GPIO thus omitted.

Assisted-by: Claude:claude-opus-4.6
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260327-wcn3990-pwrctl-sdm845-v1-1-3f5c34e3fdd0@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This commit is contained in:
David Heidelberg 2026-03-27 14:07:08 +01:00 committed by Bjorn Andersson
parent c7c8ed27b7
commit 0a9c871566

View File

@ -131,6 +131,33 @@ vreg_s4a_1p8: regulator-vreg-s4a-1p8 {
vin-supply = <&vph_pwr>;
};
wcn3990-pmu {
compatible = "qcom,wcn3990-pmu";
vddio-supply = <&vreg_s4a_1p8>;
vddxo-supply = <&vreg_l7a_1p8>;
vddrf-supply = <&vreg_l17a_1p3>;
vddch0-supply = <&vreg_l25a_3p3>;
regulators {
vreg_pmu_io: ldo0 {
regulator-name = "vreg_pmu_io";
};
vreg_pmu_xo: ldo1 {
regulator-name = "vreg_pmu_xo";
};
vreg_pmu_rf: ldo2 {
regulator-name = "vreg_pmu_rf";
};
vreg_pmu_ch0: ldo3 {
regulator-name = "vreg_pmu_ch0";
};
};
};
};
&adsp_pas {
@ -462,10 +489,11 @@ &uart6 {
bluetooth {
compatible = "qcom,wcn3990-bt";
vddio-supply = <&vreg_s4a_1p8>;
vddxo-supply = <&vreg_l7a_1p8>;
vddrf-supply = <&vreg_l17a_1p3>;
vddch0-supply = <&vreg_l25a_3p3>;
vddio-supply = <&vreg_pmu_io>;
vddxo-supply = <&vreg_pmu_xo>;
vddrf-supply = <&vreg_pmu_rf>;
vddch0-supply = <&vreg_pmu_ch0>;
max-speed = <3200000>;
};
};
@ -526,9 +554,9 @@ &venus {
&wifi {
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
vdd-1.8-xo-supply = <&vreg_pmu_xo>;
vdd-1.3-rfa-supply = <&vreg_pmu_rf>;
vdd-3.3-ch0-supply = <&vreg_pmu_ch0>;
qcom,snoc-host-cap-8bit-quirk;