Add TDM backend handling to the sc8280xp machine driver.
Use the common QCOM DAI-node TDM helper to parse the standard
DAI TDM slot properties from backend CPU and codec endpoints. Reuse the
parsed configuration when programming DAIs so hw_params does not need a
second DT traversal.
Derive the LPASS backend bit clock from the runtime TDM parameters and
request it through the backend child-clock path using LPAIF_MI2S_BCLK.
Program codec sysclk in hw_params so codec PLL setup happens before the
stream is triggered.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-8-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add common helpers to parse standard dai-tdm-slot-* properties from the
CPU and codec child nodes of a backend DAI link and apply the result to
the active DAIs.
QCOM machine drivers already use qcom_snd_parse_of() to build links from
DT, but they lacked a shared helper to translate endpoint TDM properties
into snd_soc_dai_set_tdm_slot() calls. Boards therefore had to carry ad
hoc parsing or rely on non-standard DT properties.
The helpers parse endpoint masks, validate the shared slot count and
slot width, and program CPU and codec DAIs with the resulting slot
configuration. A cfg-based apply helper is provided for callers that
already parsed the DT data and want to avoid a second DT traversal.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-7-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow standard dai-tdm-slot-* properties in the CPU and codec child
nodes of a DAI link.
The QCOM machine driver parses these child nodes to configure TDM slots
on the active CPU and codec DAIs. The properties are already defined by
the common tdm-slot binding, but qcom,sm8250.yaml currently rejects them
because the CPU and codec child nodes set additionalProperties: false.
Permit dai-tdm-slot-num, dai-tdm-slot-width and dai-tdm-slot-[rt]x-mask
there so boards using TDM backends can describe the slot layout without
schema warnings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-6-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the q6prm clock table entries and internal DSP clock IDs for LPASS
Audio IF backend clocks.
The public binding IDs map to q6prm DSP clock IDs starting at 0x500 for
Audio IF0 IBIT/EBIT. Add the internal definitions and register all Audio
IF IBIT and EBIT clocks so machine drivers can request them through the
APM clock controller.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-5-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the LPASS Audio IF clock IDs used by newer backend interfaces.
Platforms using Audio IF module backends request the interface bit
clocks through q6prm. Add the Audio IF IBIT and EBIT IDs to the binding
header so these clocks can be referenced from device trees.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-4-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add TDM DAI operations to q6apm-lpass-dais so AudioReach TDM
backends can be configured through the normal ASoC hw_params and DAI
setup flow.
The TDM set_tdm_slot() callback validates the supported slot width and
slot count, stores the active slot mask in the AudioReach module
configuration, and leaves existing DMA, I2S and HDMI paths unchanged.
Reuse the existing LPASS child-clock handling for TDM nodes as well as
MI2S nodes, since TDM backends also request optional backend clocks
through the machine driver set_sysclk() path.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-3-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add topology parsing and media-format programming for Audio IF source and
sink modules.
Add the Audio IF module IDs, the required topology tokens, and a dedicated
topology loader that stores the parsed interface configuration in the
AudioReach module state. Also add the Audio IF media-format path that
sends the interface configuration, hardware endpoint media format, and
frame-duration parameters for Audio IF modules.
This keeps the serial-interface configuration topology-driven while still
allowing the machine driver to provide runtime slot and media format
settings. The same Audio IF path can then be reused for TDM, PCM, and I2S
style backends.
The new UAPI tokens (AR_TKN_U16_MODULE_SYNC_SRC=262 through
AR_TKN_U8_MODULE_INV_EXT_BIT_CLK=276) are added, together with the value
defines used by the sync source, sync mode, data delay, interface mode,
bit clock type, and polarity tokens.
MODULE_ID_AUDIO_IF_SINK (0x0700117C) and MODULE_ID_AUDIO_IF_SOURCE
(0x0700117D) are introduced in this patch.
This Module is validated on Hawi and Shikra platforms.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260804070307.117119-2-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A temporary refcount management of a struct device can be done
gracefully with __clean(put_device) for avoiding potential leaks.
No functional change but just a code cleanup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260803135648.917760-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
The called functions already log failures where appropriate. Return the
original error directly and avoid duplicate error messages.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Reviewed-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Link: https://patch.msgid.link/20260731101539.36290-1-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct a few white-space issues, like double space after '=' character,
which will be flagged by dt-check-style. No functional changes.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260801195425.234120-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
bui duc phuc <phucduc.bui@gmail.com> says:
While cleaning up the SPEAr SPDIF driver probe path by removing
redundant error messages, build testing revealed several compilation
failures caused by outdated ASoC APIs.
The series first removes the redundant error messages, then updates the
driver to match the current ASoC APIs by replacing the removed
capture_dma_data field usage with the corresponding helper API, and
moving the DAI probe callback to struct snd_soc_dai_ops.
Link: https://patch.msgid.link/20260730095407.33894-1-phucduc.bui@gmail.com
The .probe callback is no longer part of struct snd_soc_dai_driver
and is now provided through struct snd_soc_dai_ops.
Move spdif_soc_dai_probe() accordingly so the driver follows the current
ASoC API and builds correctly on modern kernels.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-5-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .probe callback is no longer part of struct snd_soc_dai_driver
and is now provided through struct snd_soc_dai_ops.
Move spdif_in_dai_probe() accordingly so the driver follows the current
ASoC API and builds correctly on modern kernels.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-4-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the legacy direct access to dai->capture_dma_data with
snd_soc_dai_dma_data_set_capture().
The capture_dma_data field no longer exists in struct snd_soc_dai,
making the previous implementation incompatible with current ASoC APIs.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-3-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The called functions already log failures where appropriate. Return the
original error directly and avoid duplicate error messages.
Signed-off-by: bui duc phuc <phucduc.bui@gmail.com>
Link: https://patch.msgid.link/20260730095407.33894-2-phucduc.bui@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
This is v3 of "ASoC: use .auto_selectable_formats", but separated into
small blocks. It is Step1, and it will be Step4 in total.
x: this patch-set
[x] Step1: ASoC: a to b
[ ] Step2: ASoC: codec: ...
[ ] Step3: ASoC: d to r
[ ] Step4: ASoC: r to x
Current ASoC supports snd_soc_daifmt_parse_format() which can specify DAI
format by "dai-format" property from DT.
But strictly speaking, it is SW settings, so doesn't match to DT's policy.
Current ASoC is supporting auto format select via
snd_soc_dai_ops :: .auto_selectable_formats.
But the user is very few today.
DT doesn't need to specify the DAI format via "dai-format", if both CPU
and Codec drivers were supporting .auto_selectable_formats. It will be
automatically selected from .auto_selectable_formats.
One note is that auto select might not find best format on some CPU/Codec
combination. So "dai-format" is necessary anyway.
Link: https://lore.kernel.org/r/8733zfj5jj.wl-kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87pl0r20qo.wl-kuninori.morimoto.gx@renesas.com
Link: https://patch.msgid.link/87zezljgxy.wl-kuninori.morimoto.gx@renesas.com
Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
This series adds sound support for the Monaco/Monza (VENTUNO-Q)
platform on the QCS8275 board, which uses a MAX98091 codec on an
LPI MI2S link.
Patch 2 (from Neil) registers the LPASS MCLK1..MCLK5 clock IDs in
q6prm-clocks.c. Without these entries the DT clock reference
"clocks = <&q6prmcc LPASS_CLK_ID_MCLK_3 ...>" that the MAX98091
node uses cannot resolve at probe, and the codec silently runs
without MCLK.
Note: this patch has been posted to the list more than once from Oct
2025 and does not appear to be actively pursued by anyone. I
am picking it up here because the rest of this series depends on
it to get sound working on QCS8275, and it makes little sense to
send the machine-driver changes without the clock IDs they rely
on.
With these patches now we have full audio working on Arduino VENTUNO-Q.
Link: https://patch.msgid.link/20260731162626.1588561-1-srinivas.kandagatla@oss.qualcomm.com
The driver-local structure was named 'snd_soc_common', which occupies
the generic snd_soc_ ASoC namespace even though it is specific to the
Qualcomm sc8280xp machine driver.
Rename the type to qcom_snd_soc_common so the identifier is properly
scoped to this driver, and rename the pointer field in
sc8280xp_snd_data from 'snd_soc_common_priv' to 'priv' so the shorter
name doesn't repeat the type name at every use.
No functional change.
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260731162626.1588561-4-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the missing MCLK ids for the q6prm DSP interface.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260731162626.1588561-3-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Not all codecs implement the set_sysclk operation. When the board
enables codec_sysclk_set, snd_soc_dai_set_sysclk() on the codec DAI
can return -ENOTSUPP, which currently aborts hw_params and breaks
playback/capture on such boards even though the missing clock setup
is harmless.
Ignore -ENOTSUPP for the codec set_sysclk call.
Fixes: 766f3f79c3 ("ASoC: qcom: sc8280xp: enhance machine driver for board-specific config")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260731162626.1588561-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Richard Acayan <mailingradian@gmail.com> says:
This adds support for the SDM660 (formerly "SDM660 internal") sound card
and support for WCD codecs over internal MI2S (represented in APIs as
LPI MI2S).
Like on MSM8916 and MSM8953, some SDM660 and SDM670 devices connect to a
digital and analog codec. The connection to the digital codec is through
special "internal" MI2S ports. The digital and analog codecs are used on
the Xiaomi Redmi Note 7 for headset (playback + capture) and earpiece,
and also on the Google Pixel 3a for the headset.
This series does not include devicetree patches.
Link: https://patch.msgid.link/20260730174353.108023-1-mailingradian@gmail.com
The codec version CAJON_2_0 on the Snapdragon 670 requires touching the
HPH test registers. Add the quirk so this driver can also support
SDM670.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://patch.msgid.link/20260730174353.108023-16-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add regs overrides for PM8950 codec and implement matching reg overrides
via compatible.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://patch.msgid.link/20260730174353.108023-14-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the compatible for SDM660 and SDM670 devices, which can use the
support for WCD codecs connected to internal MI2S.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-13-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The LPI_MI2S_RX_0 and LPI_MI2S_TX_3 ports on SDM660 can be connected to
the digital and analog WCD codecs. They can be supported with the same
logic for other ports, but just need to be explicitly stated. Add
support for these ports.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-12-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On SDM660, LPI MI2S ports can be connected to a WCD codec which may
support headphones. Register the headphone jack on codecs connected to
the playback port, LPI_MI2S_RX_0.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-11-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the ASM-AFE routing for LPI MI2S ports which represent internal MI2S
ports on SDM660.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-10-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bindings for LPI MI2S ports, originally exclusive to q6apm, can be
used for internal MI2S ports on q6afe. Add the internal MI2S ports found
on the SDM660 internal sound card using the LPI MI2S bindings.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-9-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The bindings for LPI MI2S ports, originally exclusive to q6apm, can be
used for internal MI2S ports on q6afe. Add the port mappings for
internal MI2S, found on the Snapdragon 660 internal sound card.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-8-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The MSM8916 digital codec is also found on SDM660, typically connected to
the SDM660 internal sound card. Provide a space
for specific compatibles and add the compatible for SDM660.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-6-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The PM8953 (cajon 2.0) revision of the PM8916 analog codec is also found
on PM660L, typically connected to the SDM660 internal sound card via the
digital codec. Provide a space for specific compatibles and add the
compatible for PM660L.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-5-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document pm8950 and pm8953 analog audio codecs.
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
[richard: add back empty line]
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-4-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There are 7 internal MI2S ports per direction found on devices with the
internal sound card for Snapdragon 660. This is similar to the LPI MI2S
ports, and the LPI MI2S bindings can be reused for internal MI2S. Extend
the bindings for LPI MI2S ports to accommodate the internal MI2S ports.
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-3-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add compatibles for sdm660 based soundcards.
Signed-off-by: Nickolay Goppen <setotau@mainlining.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260730174353.108023-2-mailingradian@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com> says:
The series first documents the WSA885X devicetree binding,
including supplies, GPIOs, Interrupt and battery configuration.
It then adds the ASoC codec driver with register programming, serial
interface setup, clock handling, mute and gain control, reset handling,
interrupt support, runtime TDM slot-count configuration, and stream-time
power-state sequencing.
validated speaker playback on Shikra and Hawi platforms.
Link: https://patch.msgid.link/20260715115220.3093799-1-prasad.kumpatla@oss.qualcomm.com
Add an ASoC codec driver for the Qualcomm WSA885X stereo smart speaker
amplifier.
The driver programs the register map, handles reset and interrupt support,
exposes DAI operations for PCM/TDM playback, and provides mixer controls
for usage mode, speaker volume and RX slot mask.
Keep stream-time power-state sequencing in the DAI callbacks and use regmap
for the control path.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260715115220.3093799-3-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add bindings for the Qualcomm WSA8855 stereo smart speaker amplifier.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260715115220.3093799-2-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com> says:
This series adds support for LPASS low-power resource (LPR) voting
through PRM and introduces LPASS LPI TLMM pinctrl support for newer
platforms such as Hawi.
On such platforms, LPASS requires LPR resource voting via PRM to keep
the subsystem active. This is handled by adding a new clock ID and
support for PARAM_ID_RSC_CPU_LPR in q6prm.
Additionally, a new LPASS LPI TLMM block is introduced, requiring a
dedicated DT binding and pinctrl driver.
Link: https://patch.msgid.link/20260724141708.2212057-1-prasad.kumpatla@oss.qualcomm.com
Add support for issuing LPASS low-power resource (LPR) votes through
the PRM interface.
Some platforms (e.g. Hawi) require the LPASS to be kept active via LPR
resource voting instead of the existing hardware core vote mechanism.
Handle this by introducing support for PARAM_ID_RSC_CPU_LPR when the
LPR vote clock ID is requested.
For LPR requests, use the appropriate parameter ID and payload format
to disable CPU subsystem sleep, ensuring that the LPASS register space
remains accessible.
Also add the corresponding clock mapping for LPASS_HW_LPR_VOTE.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724141708.2212057-4-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Q6DSP_MAX_CLK_ID defines the upper bound of supported clock
identifiers in the qdsp6 LPASS clock driver.
Increase the maximum clock ID value to accommodate the LPASS
LPR vote clock identifier.
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724141708.2212057-3-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new clock ID, LPASS_HW_LPR_VOTE, to represent the LPASS low-power
resource (LPR) vote through the PRM interface.
The LPASS PRM supports a resource voting mechanism to control low-power
states via PARAM_ID_RSC_CPU_LPR. Exposing this as a q6prm clock ID allows
clients to request the LPR vote using the existing qcom,q6prm clock
provider interface.
This functionality is required on newer platforms (e.g. Hawi) where LPASS
clients need to explicitly manage LPR resource voting via PRM.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Prasad Kumpatla <prasad.kumpatla@oss.qualcomm.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260724141708.2212057-2-prasad.kumpatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The snd_sof_pcm_period_elapsed function currently schedules work on the
system-wide workqueue. This can lead to potential delays or jitter in
audio processing if the system workqueue is busy with other tasks.
To improve real-time performance and ensure timely processing of PCM
periods, we can use the system_highpri_wq instead of the default work
queue.
In performance testing, this change significantly reduced the observed
scheduling delays. For instance, under load(stressapptest -M 15000 -m
60), the maximum delay dropped from 9ms on the system workqueue to 5ms
on the dedicated high-priority workqueue.
Suggested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Yu-Hsuan Hsu <yuhsuan@google.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20260730130445.8277-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
