cn10k_ecb_aes_encrypt() just encrypts a single block with AES. That is
much more easily and efficiently done with the AES library than
crypto_skcipher. Use the AES library instead.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260321225208.64508-1-ebiggers@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
(tcp_congestion_ops)->cwnd_event() is called very often, with
@event oscillating between CA_EVENT_TX_START and other values.
This is not branch prediction friendly.
Provide a new cwnd_event_tx_start pointer dedicated for CA_EVENT_TX_START.
Both BBR and CUBIC benefit from this change, since they only care
about CA_EVENT_TX_START.
No change in kernel size:
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux
add/remove: 4/4 grow/shrink: 3/1 up/down: 564/-568 (-4)
Function old new delta
bbr_cwnd_event_tx_start - 450 +450
cubictcp_cwnd_event_tx_start - 70 +70
__pfx_cubictcp_cwnd_event_tx_start - 16 +16
__pfx_bbr_cwnd_event_tx_start - 16 +16
tcp_unregister_congestion_control 93 99 +6
tcp_update_congestion_control 518 521 +3
tcp_register_congestion_control 422 425 +3
__tcp_transmit_skb 3308 3306 -2
__pfx_cubictcp_cwnd_event 16 - -16
__pfx_bbr_cwnd_event 16 - -16
cubictcp_cwnd_event 80 - -80
bbr_cwnd_event 454 - -454
Total: Before=25240512, After=25240508, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260323234920.1097858-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The NetDrvContEnv env context uses tc clsact qdiscs and BPF tc filters
for traffic redirection, but the kernel config options are missing from
the selftests config.
Without them, the tc qdisc installation trips on:
CMD: tc qdisc add dev enp1s0 clsact
EXIT: 2
STDERR: Error: Specified qdisc kind is unknown.
net.lib.py.utils.CmdExitFailure: Command failed
Add CONFIG_NET_CLS_ACT and CONFIG_NET_SCH_INGRESS to enable these tc
options.
Fixes: 3f74d5bb80 ("selftests/net: Add env for container based tests")
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260323-config-fixes-for-nk-tests-v2-1-6c505d83e52d@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: dsa: mxl862xx: MDIO bus integrity and optimization
The MxL862xx firmware offers opt-in CRC validation on the MDIO/MMD
command interface to guard against bit errors on the bus.
The driver has not used this until now.
This series enables CRC protection on both the command registers (CRC-6)
and data payloads (CRC-16), and reduces MDIO bus traffic by bulk-zeroing
registers instead of writing zero-valued words individually.
====================
Link: https://patch.msgid.link/cover.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Issue the firmware's RST_DATA command before writing data payloads that
contain many zero words. RST_DATA zeroes both the firmware's internal
buffer and the MMD data registers in a single command, allowing the
driver to skip individual MDIO writes for zero-valued words. This
reduces bus traffic for the common case where API structs have many
unused or default-zero fields.
The optimization is applied when at least 5 zero words are found in the
payload, roughly the break-even point against the cost of the extra
RST_DATA command round-trip.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/d10bd6ad5df062d0da342c3e0d330550b3d2432b.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the firmware's opt-in CRC validation on the MDIO/MMD command
interface to detect bit errors on the bus. The firmware bundles CRC-6
and CRC-16 under a single enable flag, so both are implemented
together.
CRC-6 protects the ctrl and len_ret command registers using a table-
driven 3GPP algorithm. It is applied to every command exchange
including SET_DATA/GET_DATA batch transfers. With CRC enabled, the
firmware encodes its return value as a signed 11-bit integer within
the CRC- protected register fields, replacing the previous 16-bit
interpretation.
CRC-16 protects the data payload using the kernel's crc16() library.
The driver appends a CRC-16 checksum to outgoing data and verifies the
firmware-appended checksum on responses. The checksum is placed at the
exact byte offset where the struct data ends, correctly handling
packed structs with odd sizes by splitting the checksum across word
boundaries. SET_DATA/GET_DATA sub-commands carry only CRC-6.
Upon detection of a CRC error on either side all conduit interfaces
are taken down, triggering all user ports to go down as well. This is
the most feasible option: CRC errors are likely caused either by
broken hardware, or are symptom of overheating. In either case, trying
to resume normal operation isn't reasonable.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/620453b9a150bbe5b7ea4224331cb5dc5e57263b.1774185953.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The .parse_request() ethnl operation extracts the relevant attributes
from the netlink request to populate the private req_info.
By passing genl_info as a parameter to this callback, we can use
the GENL_REQ_ATTR_CHECK() macro to check for missing mandatory
parameters.
This macro has the advantage of returning a better error explanation
through the netlink_ext_ack struct.
Convert the eeprom ethnl code to this macro, as it's the only command
yet that has mandatory request parameters.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260323095833.136266-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The locked convenience functions phy_package_read() and
phy_package_write() were removed (as they had no users) by commit
e7f984e925 ("net: phy: move PHY package related code from phy.h
to phy_package.c"). Update the comment to reference the existing
unlocked counterparts __phy_package_read() and __phy_package_write().
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260321105825.7221-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The function vsock_stream_recvmsg() was renamed to
vsock_connectible_recvmsg() by commit a9e29e5511 ("af_vsock:
update functions for connectible socket"). Update the comment
accordingly.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260321105753.6751-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King says:
====================
net: stmmac: cleanup stmmac_xmit()
This series continues on from part 2 of the descriptor cleanups, making
stmmac_xmit() more readable.
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
====================
Link: https://patch.msgid.link/ab15_JvLGFtUH_3x@shell.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is no need to have a local variable for tbs_desc, we can do the
conversion when calling stmmac_set_desc_tbs().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w3d0b-0000000DfMD-2hrD@rmk-PC.armlinux.org.uk
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rather than freshly getting a pointer for the TBS descriptor (because
we want to access its enhanced fields) convert the existing first_desc
basic descriptor to a pointer to the enhanced descriptor.
Add a comment explaining why it is safe to convert from the basic
descriptor pointer to the enhanced descriptor pointer.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w3d0W-0000000DfM7-2BMA@rmk-PC.armlinux.org.uk
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
[pabeni@redhat.com: fixed comment typo]
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move tx_q, first_tx and txq_stats just before their first use.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w3d0R-0000000DfM1-1itN@rmk-PC.armlinux.org.uk
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The handling of the first descriptor index/pointer is split around
the checksum handling which makes no sense. Group this code together.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w3d0M-0000000DfLv-1C6S@rmk-PC.armlinux.org.uk
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move the first transmit descriptor's SARC and TBS configuration
alongside the code which populates the first descriptor, which helps
to keep all the code specific to that descriptor together.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w3d0H-0000000DfLp-0gIx@rmk-PC.armlinux.org.uk
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The skb head buffer handling is delayed in stmmac_xmit() until after
the skb fragments have been populated into the descriptors. The reason
is this code used to set the OWN bit on the first descriptor, which
then allows the TX DMA to process the first and subsequent descriptors.
However, as of commit 579a25a854 ("net: stmmac: Initial support for
TBS") this is now separated, but the comments weren't updated.
Move the code populating the first descriptor along side the jumbo code
which also populates the first descriptor. This gives a consistent
location where we populate the descriptor(s) for the SKB head.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w3d0C-0000000DfLj-0BLb@rmk-PC.armlinux.org.uk
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Yury Norov says:
====================
net: cleanup bitmaps printing
Bitmap API has a bitmap_print_to_pagebuf() function that is intended to
print bitmap into a human readable format, making sure that the output
string will not get big enough to cross the current page limit.
Some drivers use this function immediately before passing the result to
scnprintf() with no modification. This is useless because scnprintf(),
and helpers based on it like seq_pritf() and sysfs_emit(), take care of
not overflowing the buffer by itself, and perfectly print bitmaps with
"%*pb[l]".
v1: https://lore.kernel.org/all/20260219181407.290201-1-ynorov@nvidia.com/
====================
Link: https://patch.msgid.link/20260319201713.941956-1-ynorov@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Switch the function to use the proper sysfs_emit("%pb").
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Link: https://patch.msgid.link/20260319201713.941956-3-ynorov@nvidia.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver uses bitmap_print_to_pagebuf() to store human-readable
bitmaps representations in a temporary buffers; and then feed
seq_printf() with it.
Switch to using seq_printf("%*pb") directly and drop intermediate
buffer.
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Link: https://patch.msgid.link/20260319201713.941956-2-ynorov@nvidia.com
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Raju Rangoju says:
====================
amd-xgbe: TX resilience improvements for link-down handling
This series enhances the AMD 10GbE driver's TX queue handling during
link-down events to improve resilience, prevent resource leaks, and
enable fast failover in link aggregation configurations.
The three patches form a complete link-down handling solution:
1. Patch 1: Fast detection (know quickly when link goes down)
2. Patch 2: Quick response (stop TX immediately, skip waits)
3. Patch 3: Clean recovery (reclaim abandoned resources)
====================
Link: https://patch.msgid.link/20260319163251.1808611-1-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add intelligent TX descriptor cleanup mechanism to reclaim abandoned
descriptors when the physical link goes down.
When the link goes down while TX packets are in-flight, the hardware
stops processing descriptors with the OWN bit still set. The current
driver waits indefinitely for these descriptors to complete, which
never happens. This causes:
- TX ring exhaustion (no descriptors available for new packets)
- Memory leaks (skbs never freed)
- DMA mapping leaks (mappings never unmapped)
- Network stack backpressure buildup
Add force-cleanup mechanism in xgbe_tx_poll() that detects link-down
state and reclaims abandoned descriptors. The helper functions and DMA
optimizations support efficient TX shutdown:
- xgbe_wait_for_dma_tx_complete(): Wait for DMA completion with
link-down optimization
- Restructure xgbe_disable_tx() for proper shutdown sequence
Implementation:
1. Check link state at the start of tx_poll
2. If link is down, set force_cleanup flag
3. For descriptors that hardware hasn't completed (!tx_complete):
- If force_cleanup: treat as completed and reclaim resources
- If link up: break and wait for hardware (normal behavior)
The cleanup process:
- Frees skbs that will never be transmitted
- Unmaps DMA mappings
- Resets descriptors for reuse
- Does NOT count as successful transmission (correct statistics)
Benefits:
- Prevents TX ring starvation
- Eliminates memory and DMA mapping leaks
- Enables fast link recovery when link comes back up
- Critical for link aggregation failover scenarios
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260319163251.1808611-4-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Optimize the TX shutdown sequence when link goes down by skipping
futile hardware wait operations and immediately stopping TX queues.
Current behavior creates delays and resource issues during link-down:
1. xgbe_txq_prepare_tx_stop() waits up to XGBE_DMA_STOP_TIMEOUT for
TX queues to drain, but when link is down, hardware will never
complete the pending descriptors. This causes unnecessary delays
during interface shutdown.
2. TX queues remain active after link-down, allowing the network stack
to continue queuing packets that cannot be transmitted. This leads
to resource buildup and complicates recovery.
This patch adds two optimizations:
Optimization 1: Skip TX queue drain when link is down
In xgbe_txq_prepare_tx_stop(), detect link-down state and return
immediately instead of waiting for hardware. Abandoned descriptors
will be cleaned up by the force-cleanup mechanism (next patch).
Optimization 2: Immediate TX queue stop on link-down
In xgbe_phy_adjust_link(), call netif_tx_stop_all_queues() as soon
as link-down is detected. Also wake TX queues on link-up to resume
transmission.
Benefits:
- Faster interface shutdown (no pointless timeout waits)
- Prevents packet queue buildup in network stack
- Cleaner state management during link transitions
- Enables orderly descriptor cleanup by NAPI poll
Note: We do not call netdev_tx_reset_queue() on link-down because
NAPI poll may still be running, which would trigger BQL assertions.
BQL state is cleaned up naturally during descriptor reclamation.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260319163251.1808611-3-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement adaptive link status polling to enable fast link-down detection
while conserving CPU resources during link-down periods.
Currently, the driver polls link status at a fixed 1-second interval
regardless of link state. This creates a trade-off:
- Slow polling (1s): Misses rapid link state changes, causing delays
- Fast polling: Wastes CPU when link is stable or down
This enhancement introduces state-aware polling:
When carrier is UP:
Poll every 100ms to enable rapid link-down detection. This provides
~100-200ms response time to link failures, minimizing packet loss and
enabling fast failover in link aggregation configurations.
When carrier is DOWN:
Poll every 1s to conserve CPU resources. Link-up detection is less
time-critical since no traffic is flowing.
Performance impact:
- Link-down detection: 1000ms → 100-200ms (10x improvement)
- CPU overhead when link up: 0.1% → 1% (acceptable for active links)
- CPU overhead when link down: unchanged at 0.1%
This is particularly valuable for:
- Link aggregation deployments requiring sub-second failover
- Environments with flaky links or cable issues
- Applications sensitive to connection recovery time
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Link: https://patch.msgid.link/20260319163251.1808611-2-Raju.Rangoju@amd.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The io_uring_zerocopy.sh kselftest assumes that io_uring support is
enabled on the host system. When io_uring is disabled via the
kernel.io_uring_disabled sysctl, the test fails.
Explicitly enable io_uring for the test by setting
kernel.io_uring_disabled=0.
Save the original value of kernel.io_uring_disabled before changing
it and restore it in cleanup handler to ensure the system state is
restored regardless of test outcome.
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com>
Link: https://patch.msgid.link/20260321215908.175465-5-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The reuseport_* tests (bpf, bpf_cpu, bpf_numa, dualstack) currently use
a fixed port range. This can cause intermittent test failures when the
ports are already in use by other services:
failed to bind receive socket: Address already in use
To avoid conflicts, run these tests in separate network namespaces using
unshare. Each test now has its own isolated network stack, preventing
port collisions with the host services.
Signed-off-by: Aleksei Oladko <aleksey.oladko@virtuozzo.com>
Link: https://patch.msgid.link/20260321215908.175465-2-aleksey.oladko@virtuozzo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allison Henderson says:
====================
selftests: rds: add config file and config.sh -c option
This series adds an RDS-specific config file for ksft CI and extends
config.sh with a -c flag to specify an alternate config file path.
Users can now specify the path of the config they want to update, or
default to .config if none is specified.
====================
Link: https://patch.msgid.link/20260320041834.2761069-1-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds a new -c flag to config.sh that enables callers
to specify the file path of the config they would like to update.
If no config is specified, the default will be the .config of the
current directory.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260320041834.2761069-3-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ksft CI runtime needs an rds specific config file to build a
minimal kernel with the right options enabled. This patch adds
an rds selftest config containing the required CONFIG_RDS* and
CONFIG_NET_* options.
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260320041834.2761069-2-achender@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest to reproduce the infinite recursion in bond_header_parse()
when bonds are stacked (bond1 -> bond0 -> gre). When a packet is received
via AF_PACKET SOCK_DGRAM on the topmost bond, dev_parse_header() calls
bond_header_parse() which used skb->dev (always the topmost bond) to get
the bonding struct. This caused it to recurse back into itself
indefinitely, leading to stack overflow.
Before commit b7405dcf73 ("bonding: prevent potential infinite loop
in bond_header_parse()"), the test triggers:
./bond_stacked_header_parse.sh
[ 71.999481] BUG: MAX_LOCK_DEPTH too low!
[ 72.000170] turning off the locking correctness validator.
[ 72.001029] Please attach the output of /proc/lock_stat to the bug report
[ 72.002079] depth: 48 max: 48!
...
After the fix, everything works fine:
./bond_stacked_header_parse.sh
TEST: Stacked bond header_parse does not recurse [ OK ]
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Link: https://patch.msgid.link/20260320022245.392384-1-jiayuan.chen@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All six PTP-over-IP test frames (3x IPv4 + 3x IPv6) contain incorrect
UDP checksums. The stored values are the ones-complement sums of just
the pseudo-headers, not the complete UDP checksums over pseudo-header +
UDP header + payload. This is characteristic of frames captured on the
sender before TX checksum offload completion.
For example, the IPv4 Sync and Follow-Up frames both store checksum
0xa3c8 despite having different UDP payloads and port numbers - 0xa3c8
is their shared pseudo-header sum (same src/dst IP, same protocol and
UDP length).
While most L2 switches forward frames without verifying transport
checksums, hardware that performs deep packet inspection or has PTP
awareness may validate UDP checksums and drop frames that fail
verification. This causes the 1588v2 over IPv4/IPv6 tests to fail on
such hardware even though L2 PTP (which has no UDP checksum) passes
fine.
Replace all six pseudo-header partial sums with the correctly computed
full UDP checksums:
IPv4 Sync: 0xa3c8 -> 0x9f41
IPv4 Follow-Up: 0xa3c8 -> 0xeb8a
IPv4 Peer Delay Req: 0xa2bc -> 0x9ab9
IPv6 Sync: 0x2e92 -> 0x1476
IPv6 Follow-Up: 0x2e92 -> 0xf047
IPv6 Peer Delay Req: 0xb454 -> 0x891f
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://patch.msgid.link/651c3decb80023e4395ec149fd81110afa3869a1.1774067006.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Björn Töpel says:
====================
ethtool: Dynamic RSS context indirection table resizing
Some NICs (e.g. bnxt) change their RSS indirection table size based on
the queue count, because the hardware table is a shared resource. The
ethtool core locks ctx->indir_size at context creation, so drivers
have to reject channel changes when RSS contexts exist.
This series adds resize helpers and wires them up in bnxt. It also
adds tracking of the user provided indirection table size to the
ethtool core.
Patch 1 tracks the user-provided indirection table size (user_size)
in ctx->indir_user_size for non-default RSS contexts and in
dev->ethtool->rss_indir_user_size for context 0. It is set when the
indirection table is configured via netlink or ioctl, and cleared to
zero on reset-to-default.
IFF_RXFH_CONFIGURED is removed, and replaced with rss_indir_user_size.
The flag is redundant now that user_size captures the same
information.
Patch 2 adds core resize helpers:
ethtool_rxfh_indir_can_resize() - read-only validation for context 0
ethtool_rxfh_indir_resize() - fold/unfold context 0 table in place
ethtool_rxfh_ctxs_can_resize() - validate all non-default contexts
ethtool_rxfh_ctxs_resize() - resize all non-default contexts,
with locking and RSS_NTF notifications
Patch 3 uses the resize helpers in bnxt_set_channels().
Patch 4 adds HW tests in rss_drv.py (devices without dynamic table
sizing are skipped):
resize_periodic - fold/unfold with a non-default [3,2,1,0]
sub-table (user_size=4), verifying exact content preservation
(main + ctx)
resize_below_user_size_reject - periodic sub-table with user_size
between big and small device table sizes; verifies that shrinking
below user_size is rejected even when the table is periodic
(main + ctx)
resize_nonperiodic_reject - non-periodic table blocks channel
reduction, with an extra periodic context to exercise
multi-context validation (main + ctx)
resize_nonperiodic_no_corruption - failed resize leaves table
contents and channel count unchanged (main + ctx)
Running the tests:
# On real hardware
sudo NETIF=eth0 ./rss_drv.py
====================
Link: https://patch.msgid.link/20260320085826.1957255-1-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add resize tests to rss_drv.py. Devices without dynamic table sizing
are skipped via _require_dynamic_indir_size().
resize_periodic: set a periodic 4-entry table, shrink channels to
fold, grow back to unfold. Check the exact pattern is preserved. Has
main and non-default context variants.
resize_below_user_size_reject: send a periodic table with user_size
between the big and small device table sizes. Verify that shrinking
below user_size is rejected even though the table is periodic. Has
main and non-default context variants.
resize_nonperiodic_reject: set a non-periodic table (equal N), verify
that channel reduction is rejected.
resize_nonperiodic_no_corruption: verify a failed resize leaves both
the indirection table contents and the channel count unchanged.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-5-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_set_channels() previously rejected channel changes that alter the
RSS table size when RSS contexts exist, because non-default context
sizes were locked at creation.
Replace the rejection with the new resize helpers.
RSS table size only changes on P5 chips with older firmware; newer
firmware always uses the largest table size.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-4-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The core locks ctx->indir_size when an RSS context is created. Some
NICs (e.g. bnxt) change their indirection table size based on the
channel count, because the hardware table is a shared resource. This
forces drivers to reject channel changes when RSS contexts exist.
Add driver helpers to resize indirection tables:
ethtool_rxfh_indir_can_resize() checks whether the default context
indirection table can be resized.
ethtool_rxfh_indir_resize() resizes the default context table in
place. Folding (shrink) requires the table to be periodic at the new
size; non-periodic tables are rejected. Unfolding (grow) replicates
the existing pattern. Sizes must be multiples of each other.
ethtool_rxfh_ctxs_can_resize() validates all non-default RSS contexts
can be resized.
ethtool_rxfh_ctxs_resize() applies the resize.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-3-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Track the number of indirection table entries the user originally
provided (context 0/default as well!).
Replace IFF_RXFH_CONFIGURED with rss_indir_user_size: the flag is
redundant now that user_size captures the same information.
Add ethtool_rxfh_indir_lost() for drivers that must reset the
indirection table.
Convert bnxt and mlx5 to use it.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Link: https://patch.msgid.link/20260320085826.1957255-2-bjorn@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a helper to get netdev from private data pointer, so drivers won't
have to store redundant netdev in priv.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260320075605.490832-1-dqfext@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260320215230.3236005-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Link: https://patch.msgid.link/20260305104313.15898-1-johan@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: improve PCS support
This series is the next of the three part series sorting out the PCS
support in stmmac, building on part 2:
net: stmmac: qcom-ethqos: further serdes reorganisation
Similar patches have been posted previously. This series does away with
the common SerDes PHY support, instead using a flag to indicate whether
2500Mbps mode is supported (STMMAC_FLAG_SERDES_SUPPORTS_2500M.) At this
time, I have no plans to resurect the common SerDes PHY support - the
generic PHY layer implementations are just too random to consider that,
and I certainly do not want the extra work of fixing that.
The reasoning here is that these patches should be safe to merge and
should not impact qcom-ethqos in any way.
We can then figure out how to work around qcom-ethqos hacks without
having to keep re-posting these same patches time and time again.
====================
Link: https://patch.msgid.link/abrNYVfZ1Iwff2EI@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac-qcom-ethqos supports SGMII and 2500BASE-X using the integrated
PCS, so we need to expand the PCS support to include support for
BASE-X modes.
Add support to the prereset configuration to detect 2500BASE-X, and
arrange for stmmac_mac_select_pcs() to return the integrated PCS if
its supported_interfaces bitmap reports support for the interface mode.
This results in priv->hw->pcs now being write-only, so remove it.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPj-0000000DYAv-2JcZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The integrated PCS supports 802.3z (BASE-X) modes when the Synopsys
IP is coupled with an appropriate SerDes to provide the electrical
interface. The PCS presents a TBI interface to the SerDes for this.
Thus, the BASE-X related registers are only present when TBI mode is
supported.
dwmac-qcom-ethqos added support for using 2.5G with the integrated PCS
by calling dwmac_ctrl_ane() directly.
Add support for the following to the integrated PCS:
- 1000BASE-X protocol unconditionally.
- 2500BASE-X if the coupled SerDes supports 2.5G speed.
- The above without autonegotiation.
- If the PCS supports TBI, then optional BASE-X autonegotiation for each
of the above.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPe-0000000DYAp-1qpV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the link, speed and duplex for SGMII links, read from the
SGMII, RGMII and SMII status and control register.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPZ-0000000DYAj-1MdI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to describe one more register (offset and field bitmask) to
the PCS code. Move the existing PCS offset and interrupt enable bits
to a new struct and pass that in to stmmac_integrated_pcs_init().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPU-0000000DYAd-0ssk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the default_an_inband flag from struct mdio_bus_data to struct
plat_stmmacenet_data. This is to allow platforms that do not use the
integrated MDIO bus to enable inband mode.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPP-0000000DYAX-0TKw@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Davide Caratti says:
====================
netdevsim: support ETS offload
- patch 1 moves netdevsim tc offloads to a dedicated file
- patch 2 enables ETS offload on netdevsim
- patch 3 is a tdc test for ets offload on netdevsim
====================
Link: https://patch.msgid.link/cover.1773945414.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While reviewing the fix for unintentional u32 overflows in ets offload
code, Jamal said:
[...]
> otherwise a tdc test should cover it fine (when you get to the
> netdevsim change perhaps)
Extend tdc to allow setting hw-tc-offload via ethtool, and
add a test case to reproduce the division by zero fixed in [1].
[1] https://lore.kernel.org/all/CAM0EoMm17wsYZmdFLshH3_-GrZtzd=i0xnoO2yiVB=-N4761mw@mail.gmail.com/
Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Co-developed-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://patch.msgid.link/39129c374cbd00147b8c5afc04db59db62b50acc.1773945414.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
