net: stmmac: add BASE-X support to integrated PCS

The integrated PCS supports 802.3z (BASE-X) modes when the Synopsys
IP is coupled with an appropriate SerDes to provide the electrical
interface. The PCS presents a TBI interface to the SerDes for this.
Thus, the BASE-X related registers are only present when TBI mode is
supported.

dwmac-qcom-ethqos added support for using 2.5G with the integrated PCS
by calling dwmac_ctrl_ane() directly.

Add support for the following to the integrated PCS:
- 1000BASE-X protocol unconditionally.
- 2500BASE-X if the coupled SerDes supports 2.5G speed.
- The above without autonegotiation.
- If the PCS supports TBI, then optional BASE-X autonegotiation for each
  of the above.

Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1w2tPe-0000000DYAp-1qpV@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.c

@@ -26,6 +26,27 @@
 #define GMAC_RGSMII_SPEED_2_5		0
 #define GMAC_RGSMII_LNKSTS		BIT(3)
 
+static unsigned int dwmac_integrated_pcs_inband_caps(struct phylink_pcs *pcs,
+						     phy_interface_t interface)
+{
+	struct stmmac_pcs *spcs = phylink_pcs_to_stmmac_pcs(pcs);
+	unsigned int ib_caps;
+
+	if (phy_interface_mode_is_8023z(interface)) {
+		ib_caps = LINK_INBAND_DISABLE;
+
+		/* If the PCS supports TBI/RTBI, then BASE-X negotiation is
+		 * supported.
+		 */
+		if (spcs->support_tbi_rtbi)
+			ib_caps |= LINK_INBAND_ENABLE;
+
+		return ib_caps;
+	}
+
+	return 0;
+}
+
 static int dwmac_integrated_pcs_enable(struct phylink_pcs *pcs)
 {
 	struct stmmac_pcs *spcs = phylink_pcs_to_stmmac_pcs(pcs);
@@ -47,12 +68,20 @@ static void dwmac_integrated_pcs_get_state(struct phylink_pcs *pcs,
 					   struct phylink_link_state *state)
 {
 	struct stmmac_pcs *spcs = phylink_pcs_to_stmmac_pcs(pcs);
-	u32 status, rgsmii;
+	u32 status, lpa, rgsmii;
 
 	status = readl(spcs->base + GMAC_AN_STATUS);
 
 	if (phy_interface_mode_is_8023z(state->interface)) {
-		state->link = false;
+		/* For BASE-X modes, the PCS block supports the advertisement
+		 * and link partner advertisement registers using standard
+		 * 802.3 format. The status register also has the link status
+		 * and AN complete bits in the same bit location. This will
+		 * only be used when AN is enabled.
+		 */
+		lpa = readl(spcs->base + GMAC_ANE_LPA);
+
+		phylink_mii_c22_pcs_decode_state(state, neg_mode, status, lpa);
 	} else {
 		rgsmii = field_get(spcs->rgsmii_status_mask,
 				   readl(spcs->rgsmii));
@@ -84,6 +113,21 @@ static void dwmac_integrated_pcs_get_state(struct phylink_pcs *pcs,
 	}
 }
 
+static int dwmac_integrated_pcs_config_aneg(struct stmmac_pcs *spcs,
+					    phy_interface_t interface,
+					    const unsigned long *advertising)
+{
+	bool changed = false;
+	u32 adv;
+
+	adv = phylink_mii_c22_pcs_encode_advertisement(interface, advertising);
+	if (readl(spcs->base + GMAC_ANE_ADV) != adv)
+		changed = true;
+	writel(adv, spcs->base + GMAC_ANE_ADV);
+
+	return changed;
+}
+
 static int dwmac_integrated_pcs_config(struct phylink_pcs *pcs,
 				       unsigned int neg_mode,
 				       phy_interface_t interface,
@@ -91,17 +135,46 @@ static int dwmac_integrated_pcs_config(struct phylink_pcs *pcs,
 				       bool permit_pause_to_mac)
 {
 	struct stmmac_pcs *spcs = phylink_pcs_to_stmmac_pcs(pcs);
+	bool changed = false, ane = true;
 
-	dwmac_ctrl_ane(spcs->base, 0, 1, spcs->priv->hw->reverse_sgmii_enable);
+	/* Only configure the advertisement and allow AN in BASE-X mode if
+	 * the core supports TBI/RTBI. AN will be filtered out by via phylink
+	 * and the .pcs_inband_caps() method above.
+	 */
+	if (phy_interface_mode_is_8023z(interface) &&
+	    spcs->support_tbi_rtbi) {
+		ane = neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED;
 
-	return 0;
+		changed = dwmac_integrated_pcs_config_aneg(spcs, interface,
+							   advertising);
+	}
+
+	dwmac_ctrl_ane(spcs->base, 0, ane,
+		       spcs->priv->hw->reverse_sgmii_enable);
+
+	return changed;
+}
+
+static void dwmac_integrated_pcs_an_restart(struct phylink_pcs *pcs)
+{
+	struct stmmac_pcs *spcs = phylink_pcs_to_stmmac_pcs(pcs);
+	void __iomem *an_control = spcs->base + GMAC_AN_CTRL(0);
+	u32 ctrl;
+
+	/* We can only do AN restart if using TBI/RTBI mode */
+	if (spcs->support_tbi_rtbi) {
+		ctrl = readl(an_control) | GMAC_AN_CTRL_RAN;
+		writel(ctrl, an_control);
+	}
 }
 
 static const struct phylink_pcs_ops dwmac_integrated_pcs_ops = {
+	.pcs_inband_caps = dwmac_integrated_pcs_inband_caps,
 	.pcs_enable = dwmac_integrated_pcs_enable,
 	.pcs_disable = dwmac_integrated_pcs_disable,
 	.pcs_get_state = dwmac_integrated_pcs_get_state,
 	.pcs_config = dwmac_integrated_pcs_config,
+	.pcs_an_restart = dwmac_integrated_pcs_an_restart,
 };
 
 void stmmac_integrated_pcs_irq(struct stmmac_priv *priv, u32 status,
@@ -129,9 +202,18 @@ void stmmac_integrated_pcs_irq(struct stmmac_priv *priv, u32 status,
 int stmmac_integrated_pcs_get_phy_intf_sel(struct phylink_pcs *pcs,
 					   phy_interface_t interface)
 {
+	struct stmmac_pcs *spcs = phylink_pcs_to_stmmac_pcs(pcs);
+
 	if (interface == PHY_INTERFACE_MODE_SGMII)
 		return PHY_INTF_SEL_SGMII;
 
+	if (phy_interface_mode_is_8023z(interface)) {
+		if (spcs->support_tbi_rtbi)
+			return PHY_INTF_SEL_TBI;
+		else
+			return PHY_INTF_SEL_SGMII;
+	}
+
 	return -EINVAL;
 }
 
@@ -151,7 +233,20 @@ int stmmac_integrated_pcs_init(struct stmmac_priv *priv,
 	spcs->int_mask = pcs_info->int_mask;
 	spcs->pcs.ops = &dwmac_integrated_pcs_ops;
 
+	/* If the PCS supports extended status, then it supports BASE-X AN
+	 * with a TBI interface to the SerDes. Otherwise, we can support
+	 * BASE-X without AN using SGMII, which is required for qcom-ethqos.
+	 */
+	if (readl(spcs->base + GMAC_AN_STATUS) & BMSR_ESTATEN)
+		spcs->support_tbi_rtbi = true;
+
 	__set_bit(PHY_INTERFACE_MODE_SGMII, spcs->pcs.supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_1000BASEX, spcs->pcs.supported_interfaces);
+
+	/* Only allow 2500BASE-X if the SerDes has support. */
+	if (priv->plat->flags & STMMAC_FLAG_SERDES_SUPPORTS_2500M)
+		__set_bit(PHY_INTERFACE_MODE_2500BASEX,
+			  spcs->pcs.supported_interfaces);
 
 	priv->integrated_pcs = spcs;
 

drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h

@@ -41,6 +41,7 @@ struct stmmac_pcs {
 	u32 rgsmii_status_mask;
 	u32 int_mask;
 	struct phylink_pcs pcs;
+	bool support_tbi_rtbi;
 };
 
 static inline struct stmmac_pcs *

include/linux/stmmac.h

@@ -212,6 +212,7 @@ enum dwmac_core_type {
 #define STMMAC_FLAG_EN_TX_LPI_CLK_PHY_CAP	BIT(12)
 #define STMMAC_FLAG_HWTSTAMP_CORRECT_LATENCY	BIT(13)
 #define STMMAC_FLAG_KEEP_PREAMBLE_BEFORE_SFD	BIT(14)
+#define STMMAC_FLAG_SERDES_SUPPORTS_2500M	BIT(15)
 
 struct mac_device_info;