Correct xcc_id input to GET_INST from physical to logic for
gfx_v12_1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to allocate memory for MEC FW data and program
registers CP_MEC_MDBASE for each XCC respectively.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Acked-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Shaoyun.liu <Shaoyun.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The gmc fault virtual address is up to 57bit for 5 level page table,
this also works with 48bit virtual address for 4 level page table.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set pde3 invalidation request bit during tlb flush for up to 5 level
page table.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For 5-level page tables, update compute vmid sh_mem_base LDS aperture
and Scratch aperture base address to above 57-bit, use the same setting
from gfx vmid, we can remove the duplicate macro.
Update queue pdd lds_base and scratch_base to the same value as
sh_mem_base setting. Then application get process apertures return the
correct value to access LDS and Scratch memory for 57bit address 5-level
page tables. This may pass to MES in future when mapping queue.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX 12.1.0 support 57bit virtual, 52bit physical address, set PDE
max_level to 4, min_vm_size to 128PB to enable GPU vm 5-level page
tables to support 57bit virtual address.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes the CU info calculations for gfx 12.1.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the SGPR, VGPR, HWREG size and number of waves supported
for GFX 12.1 CWSR memory limits. The CU calculation changed in
topology, as a result, the values need to be updated.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To acommandate the specific ih client for soc v1_0
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the driver code is flushing TLB on XCC 0 only.
Fix it by flushing on all XCCs within the partition.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
User-configured SCLK(GPU core clock)frequencies were not persisting
across S0ix suspend/resume cycles on smu v14 hardware.
The issue occurred because of the code resetting clock frequency
to zero during resume.
This patch addresses the problem by:
- Preserving user-configured values in driver and sets the
clock frequency across resume
- Preserved settings are sent to the hardware during resume
Signed-off-by: mythilam <mythilam@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This should not be used indiviually, use amdgpu_bo_gpu_offset
with bo reserved.
v3 - unpin bo in queue destroy (Christian)
v2 - pin bo so that offset returned won't change after unlock (Christian)
Signed-off-by: Saleemkhan Jamadar <saleemkhan083@gmail.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's not required to use generic void *, change to struct amdgpu_device *.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Replace individual searches with the utility function get_ip_block
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move ip block related functions to amdgpu_ip.c. No functional change
intended.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Replay Video Conferencing V2
- Fix scratch registers offsets for DCN35 and DCN351
- Fix DP no audio issue
- Add use_max_lsw parameter
- Fix presentation of Z8 efficiency
- Add USB-C DP Alt Mode lane limitation in DCN32
- Support DRR granularity
- Don't disable DPCD mst_en if sink connected
- Set enable_legacy_fast_update to false for DCN35/351
- Split update_planes_and_stream_v3 into parts (V2)
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Summary for changes in firmware:
* Update DCHVM restore sequence for dcn35
* Add 2 new debug polling methods for dchvm "busy" during IPS entry for DCN35
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Acked-by: Wayne Lin <Wayne.Lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Currently all of the preparation and execution of plane update is done
under a DC lock, blocking other code from accessing DC for longer than
strictly necessary.
[How]
Break the v3 update flow into 3 parts:
* prepare - locked, calculate update flow and modify DC state
* execute - unlocked, program hardware
* cleanup - locked, finalize DC state and free temp resources
Legacy v2 flow too compilicated to break down for now, link new API
with old by executing everything in slightly misnamed prepare stage.
V2:
Keep the new code structure, but point all users back at the old code,
until fully tested.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Default low pwr mem state get chagned.
SW needs to wake mem up first
also need to put back to LS again after use: will do in Part II.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Existing logic will treat color temperature update = full update, cause
user color temp adjustment goes wait for update logic and fsleep in that
cause the adjustment not smooth.
[How]
Let DCN35/351 to follow DCN401 to set default value to false.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Fudong Wang <fudong.wang@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
User may connect mst dock with multi monitors and do quick unplug
and plug in one of the monitor. This operatioin may create CSN from
dock to display driver. Then display driver would disable and then enable
mst link and also disable/enable DPCD mst_en bit in dock RX. However,
when mst_en bit being disabled, if dock has another CSN message to
transmit then the message would be removed because of the disabling of
mst_en. In this case, the message is missing and it ends up no display in
the replugged monitor.
[HOW]
Don't disable mst_en bit when link still has sink connected.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Support DRR granularity for coasting Vtotal calculation
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Weiguang Li <wei-guang.li@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
USB-C DisplayPort Alt Mode with concurrent USB data needs lane count
limitation to prevent incorrect 4-lane DP configuration when only 2 lanes
are available due to hardware lane sharing between DP and USB3.
[How]
Query DMUB for Alt Mode status (is_dp_alt_disable, is_usb, is_dp4) in
dcn32_link_encoder_get_max_link_cap() and cap DP to 2 lanes when USB is
active on USB-C port. Added inline documentation explaining the USB-C
lane sharing constraint.
Reviewed-by: PeiChen Huang <peichen.huang@amd.com>
Signed-off-by: LinCheng Ku <lincheng.ku@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why/How]
Should differentiate when vblank is or isn't included
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Add use_max_lsw parameter to make prefetch for linear surfaces similar to
tiled.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Oleh Kuzhylnyi <okuzhyln@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
need to enable APG_CLOCK_ENABLE enable first
also need to wake up az from D3 before access az block
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Different platforms use different NBIO header files,
causing display code to use differnt offset and read
wrong accelerated status.
[How]
- Unified NBIO offset header file across platform.
- Correct scratch registers offsets to proper locations.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4667
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
Add new coasting vtotal type and an union to optimize
the video conference for more power saving.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: ChunTao Tso <chuntao.tso@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If console suspend has been disabled using `no_console_suspend` also
wake up during thaw() so that some messages can be seen for debugging.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/4191
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX 1250 allows the debugger to subcribe to LDS out-of-range read/write
memory violations.
Bump IOCTL minor version and flag KFD capabilities for enablement
hint.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable gpu tlb flush for gfxhub without check gfx.is_poweron
as gfx is power on by default for gfx v12_1 ASIC.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add LDS out of range reporting support in mes API
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Flush tlb properly for GMC v12.1
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There're multiple gfxhubs on GMC v12.1
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Only copy ucode for enabled xcc instead of copy for all 8 xcc
for rlc autoload on gfx v12_1 to save time.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the function execution sequence after removing
kgd2kfd_init_zone_device out of gpu full access region.
Fixes: c71980a3fc ("drm/amdgpu: reduce the full gpu access time in amdgpu_device_init.")
Signed-off-by: chong li <chongli2@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
edp_pr_get_state() incorrectly casts a uint64_t * to uint32_t * when
calling dc_wake_and_execute_gpint(). The GPINT path writes only 32 bits,
leaving the upper 32 bits of the u64 output uninitialized. Replace the
cast with a u32 temporary and copy the result into the u64 pointer.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/dc/link/protocols/link_edp_panel_control.c
1448 bool edp_pr_get_state(const struct dc_link *link, uint64_t *state)
^^^^^^^^^^^^^^^
1449 {
...
1457 do {
1458 // Send gpint command and wait for ack
--> 1459 if (!dc_wake_and_execute_gpint(dc->ctx, DMUB_GPINT__GET_REPLAY_STATE, panel_inst,
1460 (uint32_t *)state, DM_DMUB_WAIT_TYPE_WAIT_WITH_REPLY)) {
^^^^^^^^^^^^^^^^^
The dc_wake_and_execute_gpint() function doesn't take a u64, it takes a
u32. It tries to initialize the state to zero at the start but that's
not going to work because of the type mismatch. It suggests that
callers are allowed to pass uninitialized data to edp_pr_get_state() but
at present there are no callers so this is only a bug in the code but
doesn't affect runtime.
1461 // Return invalid state when GPINT times out
1462 *state = PR_STATE_INVALID;
1463 }
Fixes: 74ce00932e ("drm/amd/display: Refactor panel replay set dmub cmd flow")
Reported by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Robin Chen <robin.chen@amd.com>
Cc: Jack Chang <jack.chang@amd.com>
Cc: Leon Huang <Leon.Huang1@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Added comments for the layout of contents that addressed by doorbell_offset_addr
in RESET API
Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set xcp id for mes ring
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support rlc autload for muti-xcc on gfx v12_1.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Apply TCP_UTCL0_CNTL1 settings to all the available
xcc
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, we do not turn off retry faults in VM_CONTEXT_CNTL value
when passing it to MES if XNACK is off. This creates a situation where
XNACK is disabled in SQ but enabled in UTCL2, which is not recommended.
As a result, turn off/on retry faults in both SQ and UTCL2 when passing
vm_context_cntl value to MES if XNACK is disabled/enabled.
Suggested-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
