'bulk' description taken from another in the same file.
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/ttm/ttm_bo.c:98: warning: Function parameter or member 'bulk' not described in 'ttm_bo_set_bulk_move'
drivers/gpu/drm/ttm/ttm_bo.c:768: warning: Function parameter or member 'placement' not described in 'ttm_bo_mem_space'
drivers/gpu/drm/ttm/ttm_bo.c:768: warning: Excess function parameter 'proposed_placement' description in 'ttm_bo_mem_space'
Signed-off-by: Lee Jones <lee@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230317081718.2650744-6-lee@kernel.org
This test case uses an arbitrary pitch size, different of the default
one, to test if the conversions methods obey.
Change the "destination_pitch" colors to change the monochrome expected
result from being just zeros, as this makes the arbitrary pitch use
unusable.
Signed-off-by: Arthur Grillo <arthurgrillo@riseup.net>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230311125141.564801-3-arthurgrillo@riseup.net
gcc with W=1 reports
drivers/gpu/drm/nouveau/nvkm/nvfw/acr.c:49:1: error: no previous
prototype for ‘wpr_generic_header_dump’ [-Werror=missing-prototypes]
49 | wpr_generic_header_dump(struct nvkm_subdev *subdev,
| ^~~~~~~~~~~~~~~~~~~~~~~
wpr_generic_header_dump is only used in acr.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302124819.686469-1-trix@redhat.com
smatch reports
drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:33:18:
warning: symbol 'nvkm_engn_cgrp_get' was not declared. Should it be static?
nvkm_engn_cgrp_get is only used in runl.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230228221533.3240520-1-trix@redhat.com
gcc with W=1 reports
drivers/gpu/drm/nouveau/nvkm/engine/fifo/gf100.c:451:1: error:
no previous prototype for ‘gf100_fifo_nonstall_block’ [-Werror=missing-prototypes]
451 | gf100_fifo_nonstall_block(struct nvkm_event *event, int type, int index)
| ^~~~~~~~~~~~~~~~~~~~~~~~~
gf100_fifo_nonstall_block is only used in gf100.c, so it should be static
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Karol Herbst <kherbst@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230303132731.1919329-1-trix@redhat.com
The src/dst_pitch got mixed up during the rework of the function, make
sure the offset's refer to the correct one.
Spotted by clang:
Clang warns (or errors with CONFIG_WERROR):
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:509:29: error: variable 'dst_pitch' is uninitialized when used here [-Werror,-Wuninitialized]
src_offset = ddirty->top * dst_pitch + ddirty->left * stdu->cpp;
^~~~~~~~~
drivers/gpu/drm/vmwgfx/vmwgfx_stdu.c:492:26: note: initialize the variable 'dst_pitch' to silence this warning
s32 src_pitch, dst_pitch;
^
= 0
1 error generated.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reported-by: Nathan Chancellor <nathan@kernel.org>
Reported-by: Dave Airlie <airlied@gmail.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1811
Fixes: 39985eea5a ("drm/vmwgfx: Abstract placement selection")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314211445.1363828-1-zack@kde.org
Thread group id (aka pid from userspace point of view) is a more
interesting thing to show as an owner of a DRM fd, so track and show that
instead of the thread id.
In the next patch we will make the owner updated post file descriptor
handover, which will also be tgid based to avoid ping-pong when multiple
threads access the fd.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314141904.1210824-2-tvrtko.ursulin@linux.intel.com
Sometimes a GPIO is needed to turn on/off the display.
Add support for this usecase by introducing the optional 'enable-gpios'
property.
Tested on a imx53qsb board.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314111724.1520178-2-festevam@denx.de
The STARRY 2081101QFH032011-53G is a 10.1" WUXGA TFT LCD panel,
which fits in nicely with the existing panel-boe-tv101wum-nl6
driver. Hence, we add a new compatible with panel specific config.
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314090549.11418-1-zhouruihai@huaqin.corp-partner.google.com
The STARRY 2081101QFH032011-53G is a 10.1" WUXGA TFT LCD panel,
which fits in nicely with the existing panel-boe-tv101wum-nl6
driver. Hence, we add a new compatible with panel specific config.
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230314085034.6380-1-zhouruihai@huaqin.corp-partner.google.com
Appropriate maintainers should be suggested for changes to the
include/drm/drm_bridge.h header file, so add the header file to the
'DRM DRIVERS FOR BRIDGE CHIPS' section.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Acked-by: Robert Foss <robert.foss@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313055951.2997299-1-victor.liu@nxp.com
This driver has no way to handle damage, the reason the
drm_gem_fb_create_with_dirty() was used was because I had the
ambition that the driver would only send out updates to DSI
command displays whenever something changed, so as to
minimize traffic.
It turns out this ambition with command mode isn't working
in practice because all the MCDE does is to create a
continuous stream of DSI commands and while it is possible to
send single frame updates with it, it's not been worthwhile.
So we are just setting up continuous updates.
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/dri-devel/0e789778-03ca-e3cb-9c94-e8b55573894c@suse.de/
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-24-tzimmermann@suse.de
Use the fbdev emulation that is optimized for DMA helpers. Avoids
possible shadow buffering and makes the code simpler.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-21-tzimmermann@suse.de
Use the fbdev emulation that is optimized for DMA helpers. Avoids
possible shadow buffering and makes the code simpler.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-12-tzimmermann@suse.de
Use the fbdev emulation that is optimized for DMA helpers. Avoids
possible shadow buffering and makes the code simpler.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-10-tzimmermann@suse.de
Use the fbdev emulation that is optimized for DMA helpers. Avoids
possible shadow buffering and makes the code simpler.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-6-tzimmermann@suse.de
Implement fbdev emulation that is optimized for drivers that use
DMA helpers. The buffers may no tbe moveable, may not require damage
handling and have to be located in system memory. This allows fbdev
emulation to operate directly on the buffer and mmap it to userspace.
Besides those constraints, the emulation works like in the generic
code. As an internal DRM client provides, it receives hotplug, restore
and unregister events. The DRM client is independent from the fbdev
probing, which runs on the first successful hotplug event.
The emulation is part of the DMA helper module and not build unless
DMA helpers and fbdev emulation has been configured.
Tested with vc4.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313155138.20584-2-tzimmermann@suse.de
Some of these dependencies used to be sensible when only a small part of
the platforms supported by ARCH=arm could be compiled together in a
single kernel image. Nowadays ARCH_MULTIPLATFORM is only used as a guard
for kernel options incompatible with a multiplatform image. See commit
84fc863606 ("ARM: make ARCH_MULTIPLATFORM user-visible") for some more
details.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221209220555.3631364-1-u.kleine-koenig@pengutronix.de
Christian Hergert reports that the driver doesn't enable the property and
that leads to always doing a full plane update, even when the driver does
support damage clipping for the primary plane.
Don't enable it for the cursor plane, because its .atomic_update callback
doesn't handle damage clips.
Reported-by: Christian Hergert <chergert@redhat.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230310125943.912514-1-javierm@redhat.com
When accel drivers are disabled do not process into
sub-directories and create built-in archives:
AR drivers/accel/habanalabs/built-in.a
AR drivers/accel/ivpu/built-in.a
Fixes: 35b137630f ("accel/ivpu: Introduce a new DRM driver for Intel VPU")
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230301162508.3963484-1-stanislaw.gruszka@linux.intel.com
The hardware settings for color format and pitch are state of the
primary plane. Store the values in the primary plane's state structure
struct cirrus_primary_plane_state. Adapt all callers.
All fields in struct cirrus_device are now considered immutable after
initialization. Plane updates consider the difference between the old
and the new plane state before updating format or pitch.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-17-tzimmermann@suse.de
Test a display mode against the available amount of video memory in
struct drm_mode_config_funcs.mode_valid, which cirrus implements in
cirrus_mode_config_mode_valid(). This helper tests display modes against
device-wide limits. Remove the now-obsolete per-CRTC test.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230215161517.5113-14-tzimmermann@suse.de
