tidss encoder-bridge is not added with drm_bridge_add() call, which
leads to:
[drm] Missing drm_bridge_add() before attach
Add the missing call, using devm_drm_bridge_add() variant to get the
drm_bridge_remove() handled automatically.
The commit marked with the Fixes tag (from v6.6) is the commit that
added the encoder bridge without drm_bridge_add(). However, this fix is
not directly applicable there as devm_drm_bridge_alloc() was not used to
alloc the bridge, so using devm version for drm_bridge_add() wouldn't be
safe. Instead, drm_bridge_add() and drm_bridge_remove() would be needed
there, but that would require new plumbing code as we don't have a
separate cleanup function in the tidss_encoder.c, not in the tidss_kms.c
from which the encoder is created.
Also, there has been no reported bugs caused by the missing
drm_bridge_add(). The drm_bridge_add() initializes the bridge's
hpd_mutex, but HPD is not used for the encoder bridge. drm_bridge_add()
also adds the bridge to the global bridge_list, which is only used in
of_drm_find_bridge(), and again that is not used for the encoder bridge.
Thus, while the original commit is not right, there should be no bugs
caused by it, and for the time being I'm not sending a patch for the
stable kernels for the original commit.
This fix applies on top of commit 66cdf05f85 ("drm/tidss: encoder:
convert to devm_drm_bridge_alloc()"), which changes the tidss_encoder.c
to use the devm variant (added in v6.17). The warning print was added in
v6.19, so applying this fix to v6.17+ gets rid of the warning for all
kernel versions.
Cc: stable@vger.kernel.org # v6.17+
Fixes: c932ced6b5 ("drm/tidss: Update encoder/bridge chain connect model")
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260311-tidss-minor-fixes-v2-2-cb4479784458@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
We are calling drm_mode_config_reset() twice at probe time. There's no
reason for this and the second call can be removed, reducing work at
probe time slightly.
Fixes: 32a1795f57 ("drm/tidss: New driver for TI Keystone platform Display SubSystem")
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260311-tidss-minor-fixes-v2-1-cb4479784458@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
RZ/G3L SoC is embedded with Mali-G31 GPU system. Add GPU_PM_RT support as
it needs to be assert/deassert the reset during suspend/resume.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260320164158.487406-5-biju.das.jz@bp.renesas.com
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
On RZ/G2L SoCs, the GPU MMU requires a bus_ace clock to operate correctly.
Without it, unbind/bind cycles leave the GPU non-operational, manifesting
as an AS_ACTIVE bit stuck and a soft reset timeout falling back to hard
reset. Add bus_ace_clock as an optional clock, wiring it into init/fini,
and the runtime suspend/resume paths alongside the existing optional
bus_clock.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260320164158.487406-4-biju.das.jz@bp.renesas.com
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
The clk_enable() and clk_disable() APIs already handle NULL clock pointers
gracefully — clk_enable() returns 0 and clk_disable() returns immediately
when passed a NULL or optional clock. The explicit if (pfdev->bus_clock)
guards around these calls in the runtime suspend/resume paths are
therefore unnecessary. Remove them to simplify the code.
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260320164158.487406-3-biju.das.jz@bp.renesas.com
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Add a compatible string for the Renesas RZ/G3L SoC variants that include a
Mali-G31 GPU. These variants share the same restrictions on interrupts,
clocks, and power domains as the RZ/G2L SoC, so extend the existing schema
validation accordingly.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260320164158.487406-2-biju.das.jz@bp.renesas.com
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
The result of cdn_dp_reg_write() is checked everywhere (with the error
being logged by the callers) except one place in cdn_dp_config_video().
Add the missing result check, bailing out early on error...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: 1a0f7ed3ab ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Signed-off-by: Sergey Shtylyov <s.shtylyov@auroraos.dev>
Cc: stable@vger.kernel.org
Reviewed-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/adf6b313-f7db-4d8f-9000-8c65446ba041@auroraos.dev
Add missing error check for platform_get_resource() return value to
prevent NULL pointer dereference when memory resource is not available.
Fixes: 718b3bb9c0 ("drm/rockchip: analogix_dp: Expand device data to support multiple edp display")
Cc: stable@vger.kernel.org
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260209033123.1089370-1-nichen@iscas.ac.cn
The bridge gets allocated and initialized implicitly via the
devm_drm_bridge_alloc() helper in dw_dp_bind(). However, this is
preceded by an explicit allocation for the same dw_dp struct, which is
never used anywhere as the return from devm_kzalloc() gets immediately
overwritten by the aforementioned helper.
Get rid of the unnecessary and confusing memory allocation.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-8-645ecfb43f49@collabora.com
Simplify encoder initialization and cleanup by making use of
drmm_encoder_init(), which takes care of registering
drm_encoder_cleanup() with drmm_add_action().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-6-645ecfb43f49@collabora.com
Included header "rockchip_drm_vop.h" is not directly used, drop it.
While at it, ensure #include directives are ordered alphabetically.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-5-645ecfb43f49@collabora.com
Make the code a bit more compact by getting rid of the superfluous
assignments around PTR_ERR().
While at it, also drop dev assignment in dw_dp_probe().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-4-645ecfb43f49@collabora.com
Attempting to access driver data in the platform driver ->remove()
callback may lead to a null pointer dereference since there is no
guaranty that the component ->bind() callback invoking
platform_set_drvdata() was executed.
A common scenario is when Rockchip DRM driver didn't manage to run
component_bind_all() because of an (unrelated) error causing early
return from rockchip_drm_bind().
Drop the unnecessary call to platform_get_drvdata() and, instead,
reference the target device structure via platform_device.
Fixes: d68ba7bac9 ("drm/rockchip: Add RK3588 DPTX output support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-3-645ecfb43f49@collabora.com
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one.
Fixes: d68ba7bac9 ("drm/rockchip: Add RK3588 DPTX output support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-2-645ecfb43f49@collabora.com
Driver makes use of drmm_encoder_init() to initialize the encoder and
automatically handle the cleanup by registering drm_encoder_cleanup()
with drmm_add_action().
However, the internal structure containing the encoder part gets
allocated with devm_kzalloc(), which happens while component_bind_all()
is being called from Rockchip DRM driver. The component framework
further ensures it is deallocated as part of releasing all the resources
claimed during bind, which is triggered from component_unbind_all().
When the reference to the DRM device gets eventually dropped via
drm_dev_put() in rockchip_drm_unbind(), drmm_encoder_alloc_release()
attempts to access the now released encoder structure, leading to
use-after-free.
Ensure driver's internal structure is still reachable on encoder cleanup
by switching from a device-managed allocation to a drm-managed one.
Fixes: 969325a259 ("drm/rockchip: inno-hdmi: Convert to drm bridge")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260310-drm-rk-fixes-v2-1-645ecfb43f49@collabora.com
When pin_user_pages_fast() returns fewer pages than requested, the pages
that were successfully pinned are not released, leading to a leak.
Fix this by unpinning any partially pinned pages before returning failure.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Max Zhen <max.zhen@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260326010642.2596525-1-lizhi.hou@amd.com
The DU driver creates device_link instances between the DU and CMMs, but
never deletes them. Fix it by introducing a rcar_du_cmm structure to
group the CMM device and device_link, and deleting the links at cleanup
time.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260323164526.2292491-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The DU driver stores the CMM devices as pointers to struct
platform_device, and passes them to the API exposed by the CMM driver.
This is similar to how the VSP is handled, except that the VSP uses
struct device pointers. Replace the CMM platform_device pointers with
device pointers for consistency.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260323164526.2292491-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The VSP serves as an interface to memory and a compositor to the DU. It
therefore needs to be suspended after and resumed before the DU, to be
properly stopped and restarted in a controlled fashion driven by the DU
driver. This currently works by chance. Avoid relying on luck by
enforcing the correct suspend/resume ordering with device links.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260323164526.2292491-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
The LTN070NL01 is a 7.0 inch 1024x600, 24 bit, VESA Compatible, TFT
display panel
The LTN101AL03 is a 10.1 inch 800x1280, 24 bit, VESA Compatible, TFT
display panel
Signed-off-by: Mithil Bavishi <bavishimithil@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260303203017.511-5-bavishimithil@gmail.com
The prepare timing specified by the G190EAN01 datasheet should be
between 30 and 50 ms. Considering it might take some time for the
LVDS encoder to enable the signal, we should only wait the min.
required time in the panel driver and not the max. allowed time.
Fixes: 2f7b832fc9 ("drm/panel: simple: Add support for AUO G190EAN01 panel")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Ian Ray <ian.ray@gehealthcare.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217142528.68613-1-ian.ray@gehealthcare.com
The HTF065H045 panel based on the HX83102 controller does use DCS
commands for controlling backlight brightness. Make the driver fall back
to DCS when no external backlight has been defined in the device tree,
like many other drivers do.
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217070121.190108-5-val@packett.cool
This 720x1600 panel is found in several Motorola/Lenovo smartphones like
the Moto G9 Play (guamp). The initialization sequence is based on the
datasheet. Add it to the existing HX83102 panel driver.
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217070121.190108-4-val@packett.cool
Add a new compatible for the Holitech HTF065H045 panel that uses the
Himax HX83102 controller IC.
Signed-off-by: Val Packett <val@packett.cool>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217070121.190108-3-val@packett.cool
Jiangxi Holitech Technology Co., Ltd. is a manufacturer of display panels.
Signed-off-by: Val Packett <val@packett.cool>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260217070121.190108-2-val@packett.cool
Add driver for Samsung S6E8FC0 DSI controller for M1906F9 video mode panel,
found in Xiaomi Mi A3 mobile phone.
Co-developed-by: Kamil Gołda <kamil.golda@protonmail.com>
Signed-off-by: Kamil Gołda <kamil.golda@protonmail.com>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Yedaya Katsman <yedaya.ka@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260320-panel-patches-v7-2-3eaefc4b3878@gmail.com
Add Samsung S6E8FC0 DTS binding used with the M1906F9 6.09" 720x1560
panel found in the Xiaomi Mi A3 smartphone.
Co-developed-by: Kamil Gołda <kamil.golda@protonmail.com>
Signed-off-by: Kamil Gołda <kamil.golda@protonmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Yedaya Katsman <yedaya.ka@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260320-panel-patches-v7-1-3eaefc4b3878@gmail.com
The DSI link must be powered up to let panel driver to talk to the panel
during prepare() callback execution. Set the prepare_prev_first flag to
guarantee this.
Fixes: 9e15123eca ("drm/msm/dsi: Stop unconditionally powering up DSI hosts at modeset")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260323-panel-fix-v1-1-9f12b09161e8@oss.qualcomm.com
For code readability, several bindings which list allowed properties
with ": true" syntax group them in one place, without line breaks
between each. Align a few bindings to match this style. No functional
impact.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260313-dt-bindings-display-panel-clean-v2-1-d49615218f92@oss.qualcomm.com
Add the Tianma Micro-electronics TM050RDH03 5.0" WVGA TFT LCD panel.
Reuse panel ontat,kd50g21-40nt-a1's panel description as they are
identical.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260227-tianma-tm050rdh03-v1-2-cab78a0d765d@nxp.com
Add support for the Rocktech RK050HR345-CT106A panel based on the
Ilitek ILI9806E controller using the SPI bus.
The driver is designed to be easily extensible to support other panels
with different initialization sequences and display timings by
providing a specific descriptor structure for each model.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-5-dario.binacchi@amarulasolutions.com
Document the Rocktech 5" 480x854 panel based on the Ilitek ILI9806E
controller.
This panel uses SPI for control and an RGB interface for display
data, so adjust the binding requirements accordingly.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-4-dario.binacchi@amarulasolutions.com
Split the driver to support multiple transport buses. The core logic
(power, GPIO, backlight) is moved to a dedicated core module, while
DSI-specific code is restricted to the DSI module.
Introduce DRM_PANEL_ILITEK_ILI9806E_CORE as a hidden Kconfig symbol
selected by the bus-specific configuration.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-3-dario.binacchi@amarulasolutions.com
The Ilitek ILI9806E controller can support different transport buses,
such as MIPI-DSI and SPI. The current implementation is specific to
the MIPI-DSI interface.
In preparation for adding SPI support, rename the current Kconfig
symbol and files to be DSI-specific, clarifying the current scope
of the code.
Since DRM_PANEL_ILITEK_ILI9806E is not used in any in-tree defconfig,
the symbol is renamed directly to DRM_PANEL_ILITEK_ILI9806E_DSI without
providing a legacy compatibility alias.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-2-dario.binacchi@amarulasolutions.com
Add a driver for panels using the Himax HX83121A Display Driver IC,
including support for the BOE/CSOT PPC357DB1-4, found in HUAWEI
Matebook E Go series (Gaokun2/3).
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260316084040.728106-3-mitltlatltl@gmail.com
HX83121A is a driver IC used to drive MIPI-DSI panels. It is found
in HUAWEI Matebook E Go series (Gaokun2/3) with BOE or CSOT panels.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260316084040.728106-2-mitltlatltl@gmail.com
When the mmap function was converted from a file op to a GEM object
function in commit f5ca8eb6f9 ("drm/cma-helper: Implement mmap as GEM
CMA object functions") some VM flags were not lifted from drm_gem_mmap():
- VM_IO
- VM_DONTEXPAND
- VM_DONTDUMP
VM_DONTEXPAND was added back in commit 59f39bfa65 ("drm/cma-helper:
Set VM_DONTEXPAND for mmap"). VM_IO doesn't make sense since these are
memory buffers, while "IO tells people not to look at these pages
(accesses can have side effects)".
Add back VM_DONTDUMP. This matches the behavior of most other GEM
implementations.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260317040034.617585-1-wenst@chromium.org
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Add support for querying per-process buffer object (BO) memory
usage through the amdxdna GET_ARRAY UAPI.
Introduce a new query type, DRM_AMDXDNA_BO_USAGE, along with
struct amdxdna_drm_bo_usage to report BO memory usage statistics,
including heap, total, and internal usage.
Track BO memory usage on a per-client basis by maintaining counters
in GEM open/close and heap allocation/free paths. This ensures the
reported statistics reflect the current memory footprint of each
process.
Wire the new query into the GET_ARRAY implementation to expose
the usage information to userspace.
Link: 0546f2aaad
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260324163159.2425461-1-lizhi.hou@amd.com
Deprecate simple-encoder and simple-display-pipe helpers in favor of
regular atomic helpers. Remove the related documentation. Add TODO
item for converting the remaining drivers.
These helpers have been deprecated for years and many drivers have
been updated to not use them. Still there are a few left and we
occasionally receive new drivers build upon them. Marking them as
deprecated will hopefully resolve these problems. The TODO items
should be easy enough for getting new voluteers started on DRM driver
development.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-17-tzimmermann@suse.de
With the conversion to regular atomic helpers, mipi-dbi's support
for simple-display helpers is unused. Removed it.
v2:
- remove unused connector from struct mipi_dbi_dev
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-16-tzimmermann@suse.de
Replace simple-display helpers with regular atomic helpers. Store the
pipeline elements in struct st7735r_device and initialize them as part
of probing the device. Use mipi-dbi's existing helpers and initializer
macros where possible.
Effectively open-codes the modesetting code in the initializer helpers
of mipi-dbi and simple-display. St7735r requires a custom helper for
CRTC enablement, and non-freeing cleanup of the pipeline.
v2:
- fix connector initialization
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-15-tzimmermann@suse.de
Rename the driver's device variable according to DRM conventions. No
functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: David Lechner <david@lechnology.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260319160110.109610-14-tzimmermann@suse.de
