dt-bindings: ili9806e: add Rocktech RK050HR345-CT106A display

Document the Rocktech 5" 480x854 panel based on the Ilitek ILI9806E
controller.

This panel uses SPI for control and an RGB interface for display
data, so adjust the binding requirements accordingly.

Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260318073346.18041-4-dario.binacchi@amarulasolutions.com

Documentation/devicetree/bindings/display/panel/ilitek,ili9806e.yaml

@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/display/panel/ilitek,ili9806e.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Ilitek ILI9806E based MIPI-DSI panels
+title: Ilitek ILI9806E based panels
 
 maintainers:
   - Michael Walle <mwalle@kernel.org>
@@ -18,6 +18,7 @@ properties:
       - enum:
           - densitron,dmt028vghmcmi-1d
           - ortustech,com35h3p70ulc
+          - rocktech,rk050hr345-ct106a
       - const: ilitek,ili9806e
 
   reg:
@@ -30,11 +31,24 @@ required:
   - compatible
   - reg
   - vdd-supply
-  - vccio-supply
   - reset-gpios
   - backlight
   - port
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - rocktech,rk050hr345-ct106a
+then:
+  $ref: /schemas/spi/spi-peripheral-props.yaml#
+  required:
+    - spi-max-frequency
+else:
+  required:
+    - vccio-supply
+
 unevaluatedProperties: false
 
 examples:
@@ -60,5 +74,25 @@ examples:
             };
         };
     };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
 
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "rocktech,rk050hr345-ct106a", "ilitek,ili9806e";
+            reg = <0>;
+            vdd-supply = <&reg_vdd_panel>;
+            spi-max-frequency = <10000000>;
+            reset-gpios = <&gpiob 6 GPIO_ACTIVE_LOW>;
+            backlight = <&backlight>;
+            port {
+                panel_in_rgb: endpoint {
+                    remote-endpoint = <&ltdc_out_rgb>;
+                };
+            };
+        };
+    };
 ...