The vsp1 driver doesn't enforce a minimum value on the RPF crop rectangle
width and height. Empty rectangles are accepted, leading to incorrect
hardware behaviour. Fix it by adding minimum width and height
constraints to the value clamping.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-6-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The RPF doesn't enforces the alignment constraint on the sink pad
format, which could have an odd size, possibly down to 1x1. In that
case, the upper bounds for the left and top coordinates clamping would
become negative, cast to a very large positive value. Incorrect crop
rectangle coordinates would then be incorrectly accepted.
A second issue can occur when the requested left and top coordinates are
negative. They are cast to a large unsigned value, clamped to the
maximum. While the calculation will produce valid values for the
hardware, this is not compliant with the V4L2 specification that
requires values to be adjusted to the closest valid value.
Fix both issues by switching to signed clamping, with an explicit
minimum to adjust negative values, and adjusting the clamp bounds to
avoid negative upper bounds.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-5-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The media bus code passed to the .enum_frame_size() operation for the
sink pad is required to be supported by the device, but not to match the
current format. All entities that use the vsp1_subdev_enum_frame_size()
helper, as well as the SRU and UDS entities that implement the operation
manually, perform the check incorrectly.
Fix the issue by implementing the correct code check in the
vsp1_subdev_enum_frame_size(). For the SRU and UDS, to avoid duplicating
code, use the vsp1_subdev_enum_frame_size() as a base and override the
enumerated size on the source pad with entity-specific constraints.
While at it, include the missing <linux/mutex.h> as the code locks
mutexes.
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-4-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Most entities use the vsp1_subdev_enum_frame_size() and
vsp1_subdev_set_pad_format() helper functions to implement the
corresponding subdev operations. Both helpers are given the minimum and
maximum sizes supported by the entity as arguments, requiring each
entity to implement a wrapper.
Replace the function arguments with storing the size limits in the
vsp1_entity structure. This allows dropping most of the
.enum_frame_size() and .set_fmt() wrappers in entities.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-3-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Most entities use the vsp1_subdev_enum_mbus_code() and
vsp1_subdev_set_pad_format() helper functions to implement the
corresponding subdev operations. Both helpers are given the list of
supported media bus codes as arguments, requiring each entity to
implement a wrapper.
Replace the function arguments with storing the supported media bus
codes in the vsp1_entity structure. This allows dropping most of the
.enum_mbus_code() wrappers from entities.
Reviewed-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # HiHope RZ/G2M
Link: https://patch.msgid.link/20260318235907.831556-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for the P010 (10-bit Y/UV 4:2:0) pixel format to the
uvcvideo driver. This format is exposed by USB capture devices such as
the Magewell USB Capture HDMI 4K Pro when capturing HDR10 content.
P010 stores 10-bit Y and interleaved UV samples in 16-bit little-endian
words, with data in the upper 10 bits and zeros in the lower 6 bits.
This requires 2 bytes per sample, so bytesperline is wWidth * 2.
V4L2_PIX_FMT_P010 was added to the V4L2 core in commit 5374d8fb75
("media: Add P010 video format").
Based on the community DKMS patch from awawa-dev/P010_for_V4L2.
Link: https://github.com/awawa-dev/P010_for_V4L2
Signed-off-by: Oliver Collyer <ovcollyer@mac.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251226065718.95504-1-ovcollyer@mac.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add support for Intel RealSense D436 and D555 depth cameras metadata.
These cameras use the D4XX metadata format for transmitting depth and
sensor information.
The D555 camera uses UVC protocol version 1.5, while the D436 uses
an undefined protocol version. Both cameras require the D4XX metadata
format flag to properly handle their metadata streams.
Signed-off-by: Yogev Modlin <yogev.modlin@realsenseai.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20251026-fix-uvc-v4-2-610eb1329600@realsenseai.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
RealSense branding is now independent of Intel. Update all driver
comments referencing "Intel" to "Intel RealSense" to reflect
current ownership. No code logic changes.
Signed-off-by: Yogev Modlin <yogev.modlin@realsenseai.com>
Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://patch.msgid.link/20251026-fix-uvc-v4-1-610eb1329600@realsenseai.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
It is less prone to errors if we add a backpointer to stream from
struct uvc_video_queue.
Refactor the code.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260318202352.1374443-1-ribalda@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Now we have the metadata size hardcoded to 10 KiB, this is a value that
works fine for bulk cameras or frames with no extra metadata. But not
for all usecases.
We have seen some cameras that produce more metadata per frame. Eg:
Frame 1 captured (Bytes: 11154)
Frame 2 captured (Bytes: 11616)
Frame 3 captured (Bytes: 11374)
Frame 4 captured (Bytes: 11132)
Frame 5 captured (Bytes: 11594)
Frame 6 captured (Bytes: 11352)
Frame 7 captured (Bytes: 11110)
Frame 8 captured (Bytes: 11572)
Frame 9 captured (Bytes: 11308)
When this happens, the driver (correctly) marks the metadata as ERROR.
This patch let userspace set bigger buffersize via S_FMT.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260309-uvc-metadata-dmabuf-v1-3-fc8b87bd29c5@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The stream data structure has two queues: the metadata and the data
queues, but uvc_queue_to_stream() only supports the data queue. If we
pass the metadata queue the function will return an invalid pointer.
This patch add a parameter to the function to explicitly tell the
function which queue are we using.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260309-uvc-metadata-dmabuf-v1-2-fc8b87bd29c5@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The UVC driver has two video streams, one for the frames and another one
for the metadata. Both streams share most of the codebase, but only the
data stream declares support for DMABUF transfer mode.
I have tried the DMABUF transfer mode with CONFIG_DMABUF_HEAPS_SYSTEM
and the frames looked correct.
This patch announces the support for DMABUF for the metadata stream.
This is useful for apps/HALs that only want to support DMABUF.
Cc: stable@vger.kernel.org
Fixes: 088ead2552 ("media: uvcvideo: Add a metadata device node")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260309-uvc-metadata-dmabuf-v1-1-fc8b87bd29c5@chromium.org
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CSI-2 receiver in i.MX8ULP is almost same as i.MX8QXP/QM except
clocks and resets, so add compatible string for i.MX8ULP to handle
the difference and reuse platform data of i.MX8QXP/QM.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-4-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Call reset_control_deassert() to explicitly release reset to make sure
reset bits are cleared since platform like i.MX8ULP can't clear reset
bits automatically.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-3-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CSI-2 receiver in the i.MX8ULP is almost identical to the version
present in the i.MX8QXP/QM, but i.MX8ULP CSI-2 controller needs pclk
clock as the input clock for its APB interface of Control and Status
register(CSR). So add compatible string fsl,imx8ulp-mipi-csi2 and
increase maxItems of Clocks (clock-names) to 4 from 3. And keep the
same restriction for existing compatible.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251205-csi2_imx8ulp-v10-1-190cdadb20a3@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The ISI module on i.MX95 supports up to eight channels and four link
sources to obtain the image data for processing in its pipelines. It
can process up to eight image sources at the same time.
Add ISI basic functions support for i.MX95.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20251105-isi_imx95-v3-3-3987533cca1c@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The field BLANK_PXL provides the value of the blank pixel to be inserted
in the image in case an overflow error occurs in the output buffers of
the channel. Its default value is 0xff, so no need to set again.
Besides, the field only exist in i.MX8QM/XP ISI version. Other versions
like i.MX 8M series, remove the field since it won't send data to AXI bus
when overflow error occurs and mark BLANK_PXL as reserved. i.MX9 series
use it for other purposes.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Link: https://patch.msgid.link/20251105-isi_imx95-v3-2-3987533cca1c@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The ISI module on i.MX95 supports up to eight channels and four link
sources to obtain the image data for processing in its pipelines. It
can process up to eight image sources at the same time.
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20251105-isi_imx95-v3-1-3987533cca1c@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix a hang issue when capturing a single frame with applications like cam
in libcamera. It would hang waiting for the driver to complete the buffer,
but streaming never starts because min_queued_buffers was set to 2.
The ISI module uses a ping-pong buffer mechanism that requires two buffers
to be programmed at all times. However, when fewer than 2 user buffers are
available, the driver use internal discard buffers to fill the remaining
slot(s). Reduce minimum queued buffers from 2 to 0 allows streaming to
start without any queued buffers.
Fixes: cf21f328fc ("media: nxp: Add i.MX8 ISI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Guoniu Zhou <guoniu.zhou@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260312-isi_min_buffers-v2-1-d5ea1c79ad81@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The dw100_start() function is only called from dw100_device_run(). As
both functions are not too big, move the code directly into
dw100_device_run() and drop dw100_start() to improve readability.
This patch contains no functional changes.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-4-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
On kernels with PREEMPT_RT enabled, a "BUG: scheduling while atomic"
kernel oops occurs inside dw100_irq_handler -> vb2_buffer_done. This is
because vb2_buffer_done takes a spinlock which is not allowed within
interrupt context on PREEMPT_RT.
The first attempt to fix this was to just drop the IRQF_ONESHOT so that
the interrupt is handled threaded on PREEMPT_RT systems. This introduced
a new issue. The dw100 has an internal timeout counter that is gated by
the DW100_BUS_CTRL_AXI_MASTER_ENABLE bit. Depending on the time it takes
for the threaded handler to run and the geometry of the data being
processed it is possible to reach the timeout resulting in
DW100_INTERRUPT_STATUS_INT_ERR_TIME_OUT being set and "dw100
32e30000.dwe: Interrupt error: 0x1" errors in dmesg.
To properly fix that, split the interrupt into two halves, reset the
DW100_BUS_CTRL_AXI_MASTER_ENABLE bit in the hard interrupt handler and
do the v4l2 buffer handling in the threaded half. The IRQF_ONESHOT can
still be dropped as the interrupt gets disabled in the hard handler and
will only be reenabled on the next dw100_device_run which will not be
called before the current job has finished.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-3-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Implement dynamic vertex map updates by handling the
V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP control during streaming. This
allows to implement features like dynamic zoom, pan, rotate and dewarp.
To stay compatible with the old version, updates of
V4L2_CID_DW100_DEWARPING_16x16_VERTEX_MAP are ignored during streaming
when requests are not used. Print a corresponding warning once.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-2-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The dw100 dewarper hardware present on the NXP i.MX8MP allows very
flexible dewarping using a freely configurable vertex map. Aside from
lens dewarping the vertex map can be used to implement things like
arbitrary zoom, pan and rotation. The current driver supports setting
that vertex map before calling VIDIOC_STREAMON.
To control above mentioned features during streaming it is necessary to
update the vertex map dynamically. To do that in a race free manner V4L2
requests support is required. Add V4L2 requests support to prepare for
dynamic vertex map updates.
Signed-off-by: Stefan Klug <stefan.klug@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260304-sklug-v6-16-topic-dw100-v3-1-dev-v5-1-1a7e1f721b50@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add dev_err_probe() to all error branches in the *async_register() helpers
to provide clearer diagnostic information when device registration fails.
Drop the explicit error message after returning from
mipi_csis_async_register(), as the error is already reported by this
helper.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260121-cam_cleanup-v5-1-01d1ab38db9d@nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Scheduling of work items with an async workqueue opens the door to
potential races between multiple instances of a work item.
While the frame transfer function is now protected against races, using
a workqueue doesn't provide much benefit considering the limited cost of
creating a job transfer.
Replace the usage of the work queue with direct function calls.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The scheduling of a new buffer transfer in the IVC driver is triggered
by two occurrences of the "frame completed" interrupt.
The first interrupt occurrence identifies when all image data have been
transferred to the ISP, the second occurrence identifies when the
post-transfer VBLANK has completed and a new buffer can be transferred.
Under heavy system load conditions the actual execution of the workqueue
item might be delayed and two items might happen to run concurrently,
leading to a new frame transfer being triggered while the previous one
has not yet finished.
This error condition is only visible because the driver maintains a
status variable that counts the number of interrupts since the last
transfer, and warns in case an IRQ happens before the counter has been
reset.
To ensure sequential execution of the worqueue items and avoid a double
buffer transfer to run concurrently, protect the whole function body
with the spinlock that so far was solely used to reset the counter and
inspect the interrupt counter variable at the beginning of the buffer
transfer function.
As soon as the ongoing transfer completes, the workqueue item will be
re-scheduled and will consume the pending buffer.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
[assign ivc->buffers.curr in critical section as reported by Barnabas]
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Bit 20 should be written in this register to stop frame processing.
So fix that, as well as the poll condition.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The documentation prescribes that invalid formats should not be set,
so do a single write to ensure that both the CLFMT and DTYPE fields
are set to valid values.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
According to the documentation there are writable reserved bits in the
register and those should not be set to 0. So use `rzv2h_ivc_update_bits()`
with a proper bitmask.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vertical blanking settings for the IVC block are dependent on
settings in the ISP. This was originally set to calculate as the
worst-case possible value, but it seems that this can cause the IVC
block to hang. Instead calculate the vblank to match the default
settings (which are currently all the driver sets anyway).
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Signed-off-by: Daniel Scally <dan.scally+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Purple Fringe Correction module is enabled by default with a POR
configuration which might not be correct for the lens/sensor combination
in use.
If the Purple Fringe Correction module has to be used, it needs to be
supported in the driver's uAPI and properly configured by userspace.
As the driver doesn't support it at the moment, bypass it by default.
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Iridix Tonemap engine, if not bypassed, applies a digital gain
in order to compensate under-exposed images.
This however breaks the exposure and gain regulation performed on the
sensor.
If the Iridix Tonemap has to be used, it need to be supported in the
ISP uAPI and properly configured by userspace.
As the driver doesn't support it at the moment, bypass it by default.
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 Iridix block has a digital gain function and tone mapping
function, whose enablement is controlled by two different bits
in the BYPASS_3 register.
Unfortunately, the "Gain" and "Tonemap" bypass bit definitions are the
wrong way around. Swap them.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver uses an auto-suspend delay of 2000 milli-seconds.
As the delay is quite large, it is certainly possible that two
consecutive calls to enable_streams() do not go through a suspend of the
peripheral, meaning we cannot rely on POW register values for the ISP
configuration.
To prevent a streaming session to be initialized with settings from the
previous one, reset the full ISP configuration to know state disabling or
bypassing all the ISP blocks the driver supports.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver initializes the ISP in two points:
1) At probe time it disables ISP blocks by configuring them in bypass
mode
2) At enable_streams() it initializes the crop rectangles and the image
processing pipeline using the current image format
However, as ISP blocks are configured by userspace, if their
configuration is not reset, from the second enable_streams() call
onwards the ISP configuration will depend on the previous streaming
session configuration.
To re-initialize the ISP completely at enable_streams() time consolidate
the ISP block bypass configuration and the image processing path
configuration in a single function to be called at enabled_streams()
time.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some bad copy&paste happened in the description of the ISP block types
and AWB_CONFIG got mixed up with SHADING_CONFIG.
Fix it by assigning to each block the correct type.
As only the comment is changed, there is no uABI breakage or regression.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Dongchung's e-mail address returns a permanent error:
The following message to <dongchun.zhu@mediatek.com> was
undeliverable. The reason for the problem: 5.1.0 - Unknown address
error 550-'Relaying mail to dongchun.zhu@mediatek.com is not
allowed'
Remove the address.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The recently added v4l2_subdev_get_frame_desc_passthrough() can be used
directly as an implementation for .get_frame_desc subdev op. However, in
some cases the drivers may want to add some customizations, while the
bulk of the work is still identical to what
v4l2_subdev_get_frame_desc_passthrough() does. Current locking scheme
makes this impossible to do properly.
Split v4l2_subdev_get_frame_desc_passthrough() into two functions:
__v4l2_subdev_get_frame_desc_passthrough(), which takes a locked subdev
state as a parameter, instead of locking and getting the active state
internally. Other than that, it does the same as
v4l2_subdev_get_frame_desc_passthrough() used to do.
v4l2_subdev_get_frame_desc_passthrough(), which locks the active state
and calls __v4l2_subdev_get_frame_desc_passthrough().
In other words, v4l2_subdev_get_frame_desc_passthrough() works as
before, but drivers can now alternatively add custom .get_frame_desc
code and call v4l2_subdev_get_frame_desc_passthrough().
An example use case is with DS90UB953 serializer: in normal use the
serializer passes through everything, but when test-pattern-generator
(TPG) is used, an internal TPG source is used. After this commit, the
UB953 get_frame_desc() can lock the state, look at the routing table to
see if we're in normal or TPG mode, then either call
__v4l2_subdev_get_frame_desc_passthrough() if in normal mode, or
construct a TPG frame desc if in TPG mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
[Sakari Ailus: Rebase on an earlier remote source pad error code fix.]
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Minor code cleanups, no functional change.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Improve the v4l2_subdev_get_frame_desc_passthrough() kernel doc:
- Fix 'v4l2_get_frame_desc' operation to 'get_frame_desc' operation
- Rewrite the body text to be more understandable and specific, and
specifically mention the frame desc type handling.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Parse V4L2 device tree properties and register controls for them.
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Allow the orientation and rotation properties from video-interface-devices
to be specified. The sensor can be front or rear facing and can be mounted
at any rotation.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The control handler wasn't freed if adding controls failed, add an error
exit label and convert the existing error return to use it.
Fixes: 879347f0c2 ("media: ov8856: Add support for OV8856 sensor")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Koskovich <akoskovich@pm.me>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
STM32 DCMI may be in a power domain which is the case for the STM32MP2x
based boards. Allow a single 'power-domains' entry for STM32 DCMI.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Use IS_ERR() and PTR_ERR() to properly handle the error return from
media_pad_remote_pad_unique(), which returns ERR_PTR() on failure but
never NULL. The previous code only checked for NULL, leading to invalid
pointer dereference.
Detected by Smatch:
drivers/media/v4l2-core/v4l2-subdev.c:2588 v4l2_subdev_get_frame_desc_passthrough() warn:
'remote_source_pad' is an error pointer or valid
drivers/media/v4l2-core/v4l2-subdev.c:2595 v4l2_subdev_get_frame_desc_passthrough() error:
'remote_source_pad' dereferencing possible ERR_PTR()
Fixes: a564839e63 ("media: subdev: Add v4l2_subdev_get_frame_desc_passthrough helper")
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The IMX355 sensor driver currently supports having 4 data lanes. There
can't be more or less, so check if the firmware specifies 4 lanes.
Suggested-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/aW3uFcT1zmiF4GUP@kekkonen.localdomain
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Unicam driver is a MIPI-CSI2 Receiver, that can capture RGB 4:4:4,
YCbCr 4:2:2, and raw formats.
RGB 4:4:4 is converted to the MIPI-CSI2 RGB888 video format, and
associated to the MEDIA_BUS_FMT_RGB888_1X24 media bus code.
However, V4L2_PIX_FMT_RGB24 is defined as having its color components in
the R, G and B order, from left to right. MIPI-CSI2 however defines the
RGB888 format with blue first, and that's what MEDIA_BUS_FMT_RGB888_1X24
defines too.
This essentially means that the R and B will be swapped compared to what
V4L2_PIX_FMT_RGB24 defines. The same situation occurs with
V4L2_PIX_FMT_BGR24 being associated to MEDIA_BUS_FMT_BGR888_1X24.
In order to fix the swapped components, we need to change the
association of V4L2_PIX_FMT_BGR24 to MEDIA_BUS_FMT_RGB888_1X24, and of
V4L2_PIX_FMT_RGB24 to MEDIA_BUS_FMT_BGR888_1X24.
Since the media bus code is exposed to userspace, and validated by
unicam's link_validate implementation, we need to explicitly accept (and
warn) the old association still to preserve backward compatibility.
Signed-off-by: Maxime Ripard <mripard@redhat.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
