There're several different actual hardwares sold by Huawei, using the
same USB ID 12d1:3a07.
The first one we found, having a volume control named "Headset Playback
Volume", reports a min value -15360, and will mute iff setting it to
-15360. It can be simply fixed by quirk flag MIXER_PLAYBACK_MIN_MUTE,
which we have already submitted previously.[1]
The second one we found today, having a volume control named "PCM
Playback Volume", reports its min -11520 and res 256, and will mute
when less than -11008. Because of the already existing quirk flag, we
can just set its min to -11264, and the new minimum value will still
not be available to userspace, so that userspace's minimum will be the
correct -11008.
1. https://lore.kernel.org/all/20250903-sound-v1-3-d4ca777b8512@uniontech.com/
Tested-by: Guoli An <anguoli@uniontech.com>
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This motherboard uses USB audio instead, causing this driver to complain
about "no codecs found!".
Add it to the denylist to silence the warning.
Signed-off-by: Stuart Hayhurst <stuart.a.hayhurst@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The __component_match_add function may assign the 'matchptr' pointer
the value ERR_PTR(-ENOMEM), which will subsequently be dereferenced.
The call stack leading to the error looks like this:
hda_component_manager_init
|-> component_match_add
|-> component_match_add_release
|-> __component_match_add ( ... ,**matchptr, ... )
|-> *matchptr = ERR_PTR(-ENOMEM); // assign
|-> component_master_add_with_match( ... match)
|-> component_match_realloc(match, match->num); // dereference
Add IS_ERR() check to prevent the crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: ae7abe36e3 ("ALSA: hda/realtek: Add CS35L41 support for Thinkpad laptops")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Return value of a function acpi_evaluate_dsm() is dereferenced without
checking for NULL, but it is usually checked for this function.
acpi_evaluate_dsm() may return NULL, when acpi_evaluate_object() returns
acpi_status other than ACPI_SUCCESS, so add a check to prevent the crach.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 447106e92a ("ALSA: hda: cs35l41: Support mute notifications for CS35L41 HDA")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A small pile of fixes, almost all for the Intel and SOF code surrounding
management of the host buffer. We've also got one fix for Meson and new
device IDs and quirk supporting the RT722VB.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjmTE8ACgkQJNaLcl1U
h9AlNQf/X6gfxxDNmzmeekRxtaTOzgKk4m45xhommQ7+/9qfoDRlcljv4tBVlMgf
eijgyqjDa5uNXSseUyCyj7/Fn0+Znf7u0TMhWXaqt2E6lkT+YrDqXJ/orMkamr29
5AraOezP7lC+S5wiOtsGDC8sfXkAKI1gZXOD3IibVJN+yu2idf1b/cAUhl2URsMY
WJUK9lPr86sjrKJnaEjYAQbwADWpof3LDZ0DjzVbusaRMcVus6FU6oOUmqkXeYJ6
jQUmyzWjy1foN7Wf3BE2SWKzRAjjL0lystf2BD7P1Rg1wDLExzmCQda97eyQvQNM
BzlwNTAniDdES8wS/lp0+ltbVOKtZw==
=aUEh
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.18-merge-window' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.18
A small pile of fixes, almost all for the Intel and SOF code surrounding
management of the host buffer. We've also got one fix for Meson and new
device IDs and quirk supporting the RT722VB.
According to I2S specs audio data is sampled on the rising edge of the
clock and it can change on the falling one. When operating in normal mode
this SoC behaves the opposite so a clock polarity inversion is required
in this case.
This was tested on an OdroidC2 (Amlogic S905 SoC) board.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://patch.msgid.link/20251007-fix-i2s-polarity-v1-1-86704d9cda10@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace kmalloc_array() followed by copy_from_user() with
memdup_array_user() to improve and simplify fcp_ioctl_set_meter_map().
No functional changes intended.
Signed-off-by: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Optimize the time consumption of profile switching, init_profile saves
the common settings of different profiles, such as the dsp coefficients,
etc, which can greatly reduce the profile switching time comsumption and
remove the repetitive settings.
Fixes: e83dcd139e ("ASoC: tas2781: Add keyword "init" in profile section")
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The ASUS ROG Zephyrus Duo 15 SE (GX551QS) with ALC 289 codec requires specific
pin configuration for proper volume control. Without this quirk, volume
adjustments produce a muffled sound effect as only certain channels attenuate,
leaving bass frequency at full volume.
Testing with hdajackretask confirms these pin tweaks fix the issue:
- Pin 0x17: Internal Speaker (LFE)
- Pin 0x1e: Internal Speaker
Signed-off-by: Adam Holliday <dochollidayxx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It is allowed to mix Link and Host DMA channels in a way that their index
is different. In this case we would read the LLP from a channel which is
not used or used for other operation.
Such case can be reproduced on cAVS2.5 or ACE1 platforms with soundwire
configuration:
playback to SDW would take Host channel 0 (stream_tag 1) and no Link DMA
used
Second playback to HDMI (HDA) would use Host channel 1 (stream_tag 2) and
Link channel 0 (stream_tag 1).
In this case reading the LLP from channel 2 is incorrect as that is not the
Link channel used for the HDMI playback.
To correct this, we should look up the BE and get the channel used on the
Link side.
Fixes: 67b182bea0 ("ASoC: SOF: Intel: hda: Implement get_stream_position (Linear Link Position)")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-6-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a sanity check for the calculated delay value before reporting it to
the application. If the value is clearly invalid, emit a rate limited
warning to kernel log and return a zero delay. This can occur e.g if the
host or link DMA hits a buffer over/underrun condition.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-5-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dev_dbg_ratelimited() wrapper for snd_sof_pcm specific debug prints
that needs rate limited.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The size of the DSP host buffer was incorrectly defined as 2ms while
it is 4ms and the ChainDMA PCMs are using 5ms as host facing buffer.
The constraint will be set against the period time rather than the buffer
time to make sure that application will not face with xruns when the
DMA bursts to refill the host buffer.
The minimal period size will be also used by Pipewire in case of SOF
cards to set the headroom to a length which will avoid the cases when
the hw_ptr jumps over the appl_ptr because of a burst.
Iow, it will make Pipewire to keep a safe distance from the hw_ptr.
https://github.com/thesofproject/linux/issues/5284https://gitlab.freedesktop.org/pipewire/wireplumber/-/merge_requests/740https://gitlab.freedesktop.org/pipewire/pipewire/-/merge_requests/2548
Instead of constraining the ALSA buffer time to be double of the firmware
host buffer size, it is better to set it for the period time.
This will implicitly constrain the buffer time to a safe value
(num_periods is at least 2) and prohibits applications to set smaller
period size than what will be covered by the initial DMA burst.
Fixes: fe76d2e75a ("ASoC: SOF: Intel: hda-pcm: Use dsp_max_burst_size_in_ms to place constraint")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For ChainDMA the firmware allocates 5ms host buffer instead of the standard
4ms which should be taken into account when setting the constraint on the
buffer size.
Fixes: 842bb8b62c ("ASoC: SOF: ipc4-topology: Save the DMA maximum burst size for PCMs")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware has changed the minimum host buffer size from 2 periods to
4 periods (1 period is 1ms) which was missed by the kernel side.
Adjust the SOF_IPC4_MIN_DMA_BUFFER_SIZE to 4 ms to align with firmware.
Link: f0a14a3f41
Fixes: 594c1bb9ff ("ASoC: SOF: ipc4-topology: Do not parse the DMA_BUFFER_SIZE token")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20251002135752.2430-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Assumption that chain DMA module starts the link DMA when 1ms of
data is available from host is not correct. Instead the firmware
chain DMA module fills the link DMA with initial buffer of zeroes
and the host and link DMAs are started at the same time.
This results in a small error in delay calculation. This can become a
more severe problem if host DMA has delays that exceed 1ms. This results
in negative delay to be calculated and bogus values reported to
applications. This can confuse some applications like
alsa_conformance_test.
Fix the issue by correctly calculating the firmware chain DMA
preamble size and initializing the start offset to this value.
Cc: stable@vger.kernel.org
Fixes: a1d203d390 ("ASoC: SOF: ipc4-pcm: Enable delay reporting for ChainDMA streams")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When the sampling rates going in (host) and out (dai) from the DSP
are different, the IPC4 delay reporting does not work correctly.
Add support for this case by scaling the all raw position values to
a common timebase before calculating real-time delay for the PCM.
Cc: stable@vger.kernel.org
Fixes: 0ea06680df ("ASoC: SOF: ipc4-pcm: Correct the delay calculation")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002074719.2084-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the case of static pipelines, freeing the widgets in the pipelines
that were not suspended after freeing the scheduler widgets results in
errors because the secondary cores are powered off when the scheduler
widgets are freed. Fix this by tearing down the leftover pipelines before
powering off the secondary cores.
Cc: stable@vger.kernel.org
Fixes: d7332c4a4f ("ASoC: SOF: ipc3-topology: Fix pipeline tear down logic")
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://patch.msgid.link/20251002073125.32471-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP ProDesk 400 (SSID 103c:83f3) also needs a quirk for
enabling HDMI outputs. This patch adds the required quirk
entry.
Signed-off-by: Steven 'Steve' Kendall <skend@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On the 1824c output channel 4 left/right is the S/PDIF output,
so this needs to be able to be set.
I'm guessing that for the 1810c since it has no output channel 4,
it does not matter what the gain value of this channel is set to.
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A reasonable initial mix for the 1824c is the one that
Presonus Universal Control calls bypass.
It mutes all the physical inputs, and connects
Daw channel 1 to Line out channel 1 (left)
Daw channel 2 to Line out channel 2 (right)
Daw channel 3 to Line out channel 3 (left)
etc.
To get the most out of the 1824c a mixer application like
Universal Control is needed. One is available for linux
Link: https://github.com/royvegard/baton
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Some more updates for v6.18, mostly fixes for the earlier pull request
with some cleanups and more minor fixes for older code. We do have one
new driver, the TI TAS2783A, and some quirks for new platforms.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjZIZAACgkQJNaLcl1U
h9DZqgf+L+U/ysqynLO6NncBatsP3QHBxL8Op8DhOUG8cmtKwUHgeNJPaNDPA/rF
b6WLe6yZBXpBLyDtWo/eHwxC3pdOPJ7JcFWhpZcYMBKfxwszzki72OiZerxkwuUS
mFVr0EFkB/cbqkw9D8AF5tOMlauSDNjJQUiuNDOKD7BYvFNtuY3wOYvIA/kaW86l
SlAb3dD4pOhYP8mgPP8v8h83LyHr3NnIEX4uVSQTxZ98zZmL08FB2sCv4bzqZuag
pI6cDF1qlOT5y1CKLXIZ1JoflrUiEYyB9X1eb/rW2+8/USGzC4enr2cEm4phU3te
X4MV3N3BulSq03xewX0Jw19mdQE0Hg==
=91Ur
-----END PGP SIGNATURE-----
Merge tag 'asoc-v6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next
ASoC: Updates for v6.18 round 2
Some more updates for v6.18, mostly fixes for the earlier pull request
with some cleanups and more minor fixes for older code. We do have one
new driver, the TI TAS2783A, and some quirks for new platforms.
A few final driver specific fixes for v6.17, none super urgent so
waiting for v6.18 and backporting is probably fine for htem.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjZIM8ACgkQJNaLcl1U
h9DZdgf/X6Td8ZuZfevTk0+crh0yyUrik1Xs3TJA9Yn/ah46cMYNgKs2RCyvnaUk
BuLbaM3NzAOD5rBfHMo9Olf/L5rZst6RgpcstfxhVXZ59ibgCpSWfdfNWxl9xpls
D9VzyjFu9grgAVNOSIhtRZftFfo2oNRaeW25oWKg9veE4PZZx1LTrU8W8AR9ldme
dDuK5uTPfz9IHAqdNkCuySKMDZOvCHupjPOA/Wisa/Wdk4bFeKC5K6w9dr4XCvfD
t2qGZMo7fTstqh1BUWT3iV59kTwjM3iBzaT+K/akbb1FZv7L9Ro4+Y51kk11a1qM
m3asHMOMuUz3cwQNQ8BgpcJO1SkAMw==
=jf4k
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v6.17-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.17
A few final driver specific fixes for v6.17, none super urgent so
waiting for v6.18 and backporting is probably fine for htem.
Just briefly described about the option's change and its new usage.
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Change its permision from 0644 to 0444, and add runtime processing.
Developers now can change it during sysfs, without rebooting, for
debugging new buggy devices.
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It accepts strings like `VID:PID:quirk_flag_name1|quirk_flag_name2;...`
from now on, so that we can use it to debug USB audio devices more
intuitive and flexible. The compatibility of previous form is kept.
Co-developed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Cryolitia PukNgae <cryolitia@uniontech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous commit 0718a78f6a ("ALSA: usb-audio: Kill timer properly at
removal") patched a UAF issue caused by the error timer.
However, because the error timer kill added in this patch occurs after the
endpoint delete, a race condition to UAF still occurs, albeit rarely.
Additionally, since kill-cleanup for urb is also missing, freed memory can
be accessed in interrupt context related to urb, which can cause UAF.
Therefore, to prevent this, error timer and urb must be killed before
freeing the heap memory.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+f02665daa2abeef4a947@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f02665daa2abeef4a947
Fixes: 0718a78f6a ("ALSA: usb-audio: Kill timer properly at removal")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The 1824c does not have the A/B switch that the 1810c has,
but instead it has a mono main switch that sums the two
main output channels to mono.
Signed-off-by: Roy Vegard Ovesen <roy.vegard.ovesen@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When building kernel docs, the following warning appeared:
WARNING: ./include/uapi/sound/compress_params.h:364
struct member 'chan_map' not described in 'snd_dec_opus'
The inline struct 'snd_dec_opus_ch_map' inside 'snd_dec_opus' was not
properly documented. This patch documents the 'chan_map' member and its
fields (stream_count, coupled_count, channel_map), resolving the warning.
Fixes: 5d36370f34 ("ALSA: compress: add raw opus codec define and opus decoder structs")
Suggested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Kriish Sharma <kriish.sharma2006@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds support for changed firmware addresses on the B2 revision of
CS35L56 silicon.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Defer setting the cs35l56_base.fw_regs pointer until after the REVID has
been read in cs35l56_hw_init(). Also make the corresponding change to the
cs35l56_hda drivers to prevent a build break.
This is preparing for firmware registers that change address between
revisions of the same device.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
HP-Spectre 14t-ea100 model has no speaker output unless booting
previously from Windows on dual boot, a reboot while on Linux will
stop the speakers working. Applying the existing quirk for HP Spectre
X360 EU0xxx seems fixing this speaker problem.
Reported-by: Kaden Berger <kadenb816@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/aMxdGAmfOQ6VPNU8@archlinux
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This code returns the wrong variable "tas_dev->regmap" instead of
"regmap" so it returns success instead of a negative error code.
Return the correct variable.
Fixes: 4cc9bd8d7b ("ASoc: tas2783A: Add soundwire based codec driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aNYQf4cyavnku5Nt@stanley.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
The problem of having class-D initialization sequence in probe using
regmap_register_patch() is that it will do hardware register writes
immediately after being called as it bypasses regcache. Afterwards, in
aic3x_init() we also perform codec soft reset, rendering class-D init
sequence pointless. This issue is even more apparent when using reset
GPIO line, since in that case class-D amplifier initialization fails
with "Failed to init class D: -5" message as codec is already held in
reset state after requesting the reset GPIO and hence hardware I/O
fails with -EIO errno.
Thus move class-D amplifier initialization sequence from probe function
to aic3x_set_power() just before the usual regcache sync. Use bypassed
regmap_multi_reg_write_bypassed() function to make sure, class-D init
sequence is performed in proper order as described in the datasheet.
Signed-off-by: Primoz Fiser <primoz.fiser@norik.com>
Link: https://patch.msgid.link/20250925085929.2581749-1-primoz.fiser@norik.com
Signed-off-by: Mark Brown <broonie@kernel.org>
All firmware for the Lemans platform aka QCS9100 aka QCS9075 is for
historical reasons located in the qcom/sa8775p/ subdir inside
linux-firmware. The only exceptions to this rule are audio topology
files. While it's not too late, change the subdir to point to the
sa8775p/ subdir, so that all firmware for that platform is present at
the same location.
Fixes: 5b5bf5922f ("ASoC: qcom: sc8280xp: Add sound card support for QCS9100 and QCS9075")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250924-lemans-evk-topo-v2-1-7d44909a5758@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Current Renesas MSIOF driver might get some errors. This patch-set try to
reduce/remove them.
The mclk direction now needs to be specified in endpoint node with
"system-clock-direction-out" property. However some calls to the
set_sysclk callback, related to CPU DAI clock, result in unbalanced
calls to clock API.
The set_sysclk callback in STM32 SAI driver is intended only for mclk
management. So it is relevant to ensure that calls to set_sysclk are
related to mclk only.
Since the master clock is handled only at runtime, skip the calls to
set_sysclk in the initialization phase.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20250916123118.84175-1-olivier.moysan@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Renesas have tried to minimize the occurrence of FSERR errors as much as
possible, but unfortunately we cannot remove them completely, because
MSIOF might setup its register during CLK/SYNC are inputed. It can be
happen because MSIOF is working as Clock/Frame Consumer.
Ignore 1st FSERR which we can do nothing
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Link: https://patch.msgid.link/874isryutg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver is assuming MSIOF is used as Clock/Frame Consumer Mode, and
there is a case that some Codec (= Clock/Frame Provider) might output
Clock/Frame before setup MSIOF.
And, MSIOF will capture data without checking SYNC signal Hi/Low (= R/L).
This means, if MSIOF RXE bit was set as 1 in case of SYNC signal was Hi
(= R) timing, it will start capture data since next SYNC low signal (= L).
Because Linux assumes sound data is lined up as R->L->R->L->..., the data
R/L might be opposite.
The only solution in this case is start CLK/SYNC *after* MSIOF settings,
but it depends when and how Codec driver start it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Link: https://patch.msgid.link/875xd7yutm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SITMDRn / SIRMDRn and some other registers should not be updated during
working even though it was not related the target direction (for example,
do TX settings during RX is working), otherwise it cause a FSERR.
Setup both direction (Playback/Capture) in the same time.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Link: https://patch.msgid.link/877bxnyutt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current DMAC is stopped before HW stop, but it might be cause of
sync error. Stop HW first.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Link: https://patch.msgid.link/878qi3yuu0.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MSIOF TX/RX are sharing same clock. Adds .symmetric_xxx flags.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Link: https://patch.msgid.link/87a52jyuu6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because it uses DMAC, we would like to transfer data if there is any data.
Set SIFCTR for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Link: https://patch.msgid.link/87bjmzyuub.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MSIOF has TXRST/RXRST to reset FIFO, but it shouldn't be used during SYNC
signal was asserted, because it will be cause of HW issue.
When MSIOF is used as Sound driver, this driver is assuming it is used as
clock consumer mode (= Codec is clock provider). This means, it can't
control SYNC signal by itself.
We need to use SW reset (= reset_control_xxx()) instead of TXRST/RXRST.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Link: https://patch.msgid.link/87cy7fyuug.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
