The struct intel_framebuffer allocation naturally belongs in intel_fb.c,
not hidden inside panic implementation. Separate the panic
allocation. Drop the unnecessary struct i915_framebuffer and struct
xe_framebuffer types.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/d29f63e0118d002fc8edd368caea7e8185418e17.1756835342.git.jani.nikula@intel.com
Prepare for better shared interfaces between panic implementations. The
struct intel_panic remains an opaque data type, with unique
implementations in i915 and xe.
This allows us to change the panic data pointer from void * to struct
intel_panic *, helping type safety.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/884ffc80c8b5fef1b92956e644a4e559560cc2ba.1756835342.git.jani.nikula@intel.com
Add a panic data pointer member in struct intel_framebuffer in
preparation for breaking the artificial subclassing between
intel_framebuffer and panic structures.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/41f42e1de8545409274d54854aa12e0fb390e394.1756835342.git.jani.nikula@intel.com
Rename the intel_bo_panic_*() functions according to the functionality,
dropping the misleading intel_bo reference.
Keep intel_bo_alloc_framebuffer() for now; it'll be refactored later.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/a3be8f8b5e7dd208027a1131e89452d9a214054f.1756835342.git.jani.nikula@intel.com
intel_bo.[ch] is not the appropriate location for the panic
functionality. Split out intel_panic.[ch] and xe_panic.c in i915 and
xe. Keep the function names for now.
Cc: Jocelyn Falempe <jfalempe@redhat.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://lore.kernel.org/r/d98b831a011a028ffd33ce99b0ba62be061ee235.1756835342.git.jani.nikula@intel.com
WA:22010751166 does not apply past display version 12. Or, in
other words, the FBC restriction where FBC is disabled for
non-modulo 4 plane sizes (including plane size + yoffset) is fixed
from display version 13 and onwards. Relax the restriction for the same.
v4: Dropped redundant commit message
v3: Update comments for clarity (Jonathan Cavitt)
v2: Update the macro for display version check (Vinod)
Suggested-by: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250904095338.300813-2-uma.shankar@intel.com
For ternary operators in the form of "a ? false : true", if 'a' itself
returns a boolean result, the ternary operator can be omitted. Remove
redundant ternary operators to clean up the code.
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Link: https://lore.kernel.org/r/20250904112644.350512-1-liaoyuanhong@vivo.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The encoder name deduction has become a bit cumbersome within
intel_ddi_init(). Split it out to a separate function to declutter
intel_ddi_init(), even if that means having to use a temp seq buffer for
the name.
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://lore.kernel.org/r/20250903101050.3671305-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
for_each_set_bit() expects size to be in bits, not bytes. The abox mask
iteration uses bytes, but it works by coincidence, because the local
variable holding the mask is unsigned long, and the mask only ever has
bit 2 as the highest bit. Using a smaller type could lead to subtle and
very hard to track bugs.
Fixes: 62afef2811 ("drm/i915/rkl: RKL uses ABOX0 for pixel transfers")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: stable@vger.kernel.org # v5.9+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250905104149.1144751-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Currently return value of drm_dpcd_readb is not checked when reading sink
Panel Replay Selective Update capabilities.
Fix this and switch to drm_dpcd_read_byte.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://lore.kernel.org/r/20250827060809.2461725-1-jouni.hogander@intel.com
We are currently observing crc failures after we started using dsb for PSR
updates as well. This seems to happen because PSR HW is still sending
couple of updates using old framebuffers on wake-up.
Fix this by adding poll ensuring PSR is idle before starting update.
v2: pass new_crtc_state->dsb_commit to intel_psr_wait_for_idle_dsb
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250905072708.2659411-5-jouni.hogander@intel.com
We are currently observing crc failures after we started using dsb for PSR
updates as well. This seems to happen because PSR HW is still sending
couple of updates using old framebuffers on wake-up.
This patch is preparing to fix that by adding interface which can be used
to add poll ensuring PSR HW is idle into dsb commit.
v3: add intel_dsb as a parameter to intel_psr_wait_for_idle_dsb
v2: add pass crtc_state->dsb_commit as parameter
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://lore.kernel.org/r/20250905072708.2659411-4-jouni.hogander@intel.com
skl_crtc_allocate_plane_ddb allow iter.data_rate to be zero
which could cause divide by zero in skl_allocate_plane_ddb,
check against that.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250905104626.1274147-3-juhapekka.heikkila@gmail.com
if __waitfor timeout, ret will have -ETIMEDOUT. Then if condition
was met, and read_ret will have error that's handled.
Then if ret was zero, read_ret was zero ksv_ready must have value.
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://lore.kernel.org/r/20250905104626.1274147-1-juhapekka.heikkila@gmail.com
Print the memory details even if the detection failed in some way
but we continued the driver initialization anyway. It'll be easier
to debug issues if we at least know what the final results were.
And while at it also print the number of PSF GV points. Previously
we only printed the QGV points.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently the icl codepaths first determine the memory type from the
memory controller registers (via skl_get_dram_info()->skl_get_dram_type())
and then overwrite the results with icl_pcode_read_mem_global_info().
Get rid of the pointless (and potentially incorrect) skl_get_dram_type()
stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use consistent spelling when talking about the 16Gb DIMM w/a.
Even currently language is a bit off as the w/a is actually
about DIMMs with 16Gb DRAM devices on them, not the total capacity
of the whole DIMM. But this language does more or less match how
Bspec talks about this stuff.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We are incorrectly applying the 16Gb DIMM w/a (adding 1 extra
usec to WM0 latency) on MTL+ even though the w/a is only needed
for SKL/ICL.
The current way of setting this is up is a bit of a disaster:
1. always set has_16gb_dimms=true for all platforms except BXT/GLK
2. has_16gb_dimms potentially gets overwritten with something else
* BXT/GLK don't do anything since we never set has_16gb_dimms to
begin with
* skl_get_dram_info() overwrites has_16gb_dimms with the actual
detection results for SKL/ICL/derivatives
* gen12_get_dram_info() (correctly) resets has_16gb_dimms
for TGL/ADL/derivatives
* xelpdp_get_dram_info() doesn't do anything, leaving
has_16gb_dimms incorrectly set for MTL+
Clean up the whole mess by only setting has_16gb_dimms in the
SKL/ICL codepaths where we have the actual detection code for
it. This avois applying the w/a incorrectly on MTL+.
v2: Rewrite commit msg (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902133113.18778-6-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Set the MTP TC hotplug bits in the correct register.
Shouldn't matter really as this only gets used for eDP
detection and there should be never eDP on TC ports on
current hw.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250902153915.4423-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
During system resume the display power state verification will print the
"power well x state mismatch (refcount 0/enabled 1)"
error message from the early resume sequence for a power well left
enabled by BIOS. This power well was probably left enabled by BIOS
inadvertently, since BIOS versions on current platforms do not leave any
display output enabled while resuming from an Sx power state, hence the
enabled display power well is unused. In theory however it is possible
that BIOS leaves a display output enabled, in that case the enabled
power well shouldn't be reported as an error.
According to the above, remove the display power state verification from
the early resume phase to avoid incorrectly reporting an enabled power
well without a power reference as an error.
Note: The refcount for any enabled and used power well (i.e. used for an
enabled display output) will be acquired following the early resume
sequence, after the HW state for display outputs (encoder/crtc etc.) is
read out. Any power well enabled but not used (hence not holding a
reference) will be disabled after the HW state readout. The display
power state will be verified afterwards in intel_power_domains_enable().
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6012
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250903122152.2526050-1-imre.deak@intel.com
Currently we are using maximum lfps cycle and silence period times when
calculating AUXLess wake time. Use actual values instead.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250829053929.3585636-5-jouni.hogander@intel.com
Currently LFPS is hadcoded for different port clocks. Replace this with
proper calculation.
v2: replace hardcoded 20 with 2 * LFPS_CYCLE_COUNT
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250829053929.3585636-4-jouni.hogander@intel.com
Add own define for LFPS count and use it for the configuration. This new
define will be used for calculating ALPM parameters as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://lore.kernel.org/r/20250829053929.3585636-3-jouni.hogander@intel.com
Unify on using poll_timeout_us() throughout instead of mixing with
readx_poll_timeout(). While the latter can be ever so slightly simpler,
they are both complicated enough that it's better to unify on one
approach only.
While at it, better separate the handling of error returns from
drm_dp_dpcd_readb() and the actual status byte. This is best achieved by
inlining the read_fec_detected_status() function, and switching to
drm_dp_dpcd_read_byte().
v2: Use drm_dp_dpcd_read_byte() (Imre)
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/63b10a36c7ab545c640b24bc8fc007ce2ea74623.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 1 ms sleep instead. The timeout remains, being
opregion defined, 50 ms by default, and 1500 ms at most.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/63db3a1e1db9e55a18ed322c55f2dffe511a10bb.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 5 ms sleep instead. The timeouts remain, being
400 ms or 800 ms, depending on the case.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/4065fa96c0ef6afd51a384f365761d2ca802256b.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 100 us sleep instead. The timeout remains at 1
ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/979eae02af1184b3756746ace61379dd1947a79b.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 200 us sleep for the 5 ms timeout, and 1000 us
sleep for the 500 ms timeout. The timeouts remain the same.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/50cd06b61210f541d5bb52a36af2d8bf059dd3a1.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 500 us sleep instead. The timeout remains at
100 ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/162dff5862d3213304491a6d2eb31a57346b523e.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 500 us sleep instead. The timeout remains at
500 ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/29ab4738758fe844dc1323c4a59d5d6bdcf87308.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 1 ms sleep instead. The timeouts remain, being
500 ms or 1000 ms depending on the case.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/83d3417d4e5af1db13eb4c6eaa48b5f9c12caeb4.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 500 us sleep instead. The timeout remains at
100 ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/c644b7b5611a3c047ea5d3d52acd91830b2fa6b4.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 100 us sleep instead. The timeout remains at 1
ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/663c9edf4a98b09121d7200f8d734ebc829da85b.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 100 us sleep instead. The timeout remains at 1
ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/900680516b047ae32e3298b5cdbcede0393e0466.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 500 us sleep instead. The timeout remains at
50 ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/6d50031411d5517508867d4b595ce90a2b44073b.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 500 us sleep instead. The timeout remains at 3
ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/52c80860ea7b98e84f2386ed6cdd761f03190b1e.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The "two tier" wait_for_us() + wait_for() combination appeared without
much explanation in commit 4e6c2d58ba ("drm/i915: Take forcewake once
for the entire GMBUS transaction"). Try to mimic roughly the same with
the generic helpers.
wait_for_us() with 10 us or shorter timeouts ends up in
_wait_for_atomic(). Thus use poll_timeout_us_atomic() for the first try,
with the same 2 us timeout and no sleep.
For the fallback, the functional change is losing the exponentially
growing sleep of wait_for(), which used to be 10, 20, 40, ..., 640, and
1280 us. Use an arbitrary constant 500 us sleep instead. The timeout
remains at 50 ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/564b397352c53a1116519fb2d53050c0426bc0dc.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 500 us sleep instead. The timeout remains at
20 ms.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/476fcc5aad9e2ddbf6d8c14bd5ff5cbf071c5dca.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer generic poll helpers over i915 custom helpers.
The functional change is losing the exponentially growing sleep of
wait_for(), which used to be 10, 20, 40, ..., 640, and 1280 us.
Use an arbitrary constant 100 us sleep instead. The timeout remains at 1
ms.
While at it, use the last failing value for debug logging instead of
reading it again.
Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Link: https://lore.kernel.org/r/2871a07337401c25ef3df44073c5e78fedc45e8e.1756383233.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
