Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260430083335.215239-4-johan@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260430083335.215239-3-johan@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260430083335.215239-2-johan@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt76_put_vif_phy_link() frees the offchannel mlink with plain kfree()
after rcu_assign_pointer(NULL). However, rcu_assign_pointer only prevents
future RCU readers from obtaining the pointer -- it does not wait for
existing readers that already hold it via rcu_dereference.
The TX datapath (e.g. mt7996_mac_write_txwi) dereferences mlink->wcid
and mlink->idx under rcu_read_lock. If a TX softirq obtained the pointer
via rcu_dereference just before the NULL assignment, it will dereference
freed memory after the kfree.
struct mt76_vif_link already contains an rcu_head field that is unused at
this free site -- a developer oversight, since the adjacent
kfree_rcu_mightsleep call for rx_sc in the same function shows the
pattern was understood.
Replace kfree(mlink) with kfree_rcu(mlink, rcu_head).
Fixes: a8f424c128 ("wifi: mt76: add multi-radio remain_on_channel functions")
Signed-off-by: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507043531.492-1-rajat.gupta@oss.qualcomm.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
On a STATION vif, removing a TDLS peer takes the mt7925_mac_sta_remove
-> mt7925_mac_sta_remove_links path. The first loop in that function
calls mt7925_mcu_add_bss_info(..., enable=false) for every link of the
station being removed. For a non-MLO STATION vif there is exactly one
link, link 0, whose bss_conf is the AP's. TDLS peers do not have their
own bss_conf - they share the AP's BSS.
The result is that every TDLS peer teardown sends a BSS_INFO_UPDATE
with enable=0 for the AP's BSS to the firmware, which wipes the AP-side
rate-control context. The connection stays associated and TX from the
host still works at the negotiated rate, but the AP's downlink to us
collapses to the lowest mandatory OFDM rate (HE-MCS 0 / 6 Mbit/s OFDM)
and only slowly recovers as rate adaptation re-learns under sustained
traffic. With brief or bursty traffic the link can stay at 6-72 Mbit/s
indefinitely, requiring a manual reconnect.
mt7925_mac_link_sta_remove() already guards its own
mt7925_mcu_add_bss_info(..., false) call with
"vif->type == NL80211_IFTYPE_STATION && !link_sta->sta->tdls".
Add the equivalent guard at the top of the cleanup loop in
mt7925_mac_sta_remove_links(), above the link_sta / link_conf /
mlink / mconf lookups, so TDLS peer teardown skips the loop body
entirely without doing the per-link work that would just be thrown
away.
Verified on mt7925e by triggering Samsung-S938B auto-TDLS via iperf3
and watching iw rx bitrate after teardown:
Before: rx bitrate collapses to 6.0-72.0 Mbit/s, oscillates 17/72/
137/288/432 Mbit/s for 30+ seconds, no full recovery without
a manual reassoc.
After: rx bitrate stays at 1200.9 Mbit/s HE-MCS 11 NSS 2 80 MHz
across the entire TDLS lifecycle.
bpftrace confirms a single mt7925_mcu_add_bss_info(enable=0) call per
teardown before the fix; zero such calls after.
Fixes: 3878b43336 ("wifi: mt76: mt7925: update mt7925_mac_link_sta_[add, assoc, remove] for MLO")
Cc: stable@vger.kernel.org
Signed-off-by: ElXreno <elxreno@gmail.com>
Assisted-by: Claude:claude-opus-4-7 bpftrace
Link: https://patch.msgid.link/20260506-mt7925-tdls-fixes-v2-2-46aa826ba8bb@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
With HW TX encap offload enabled, the mt76 firmware builds the 802.11
header for the 802.3 frame using the per-WCID context. For a STATION
vif the HDR_TRANS TLV currently sets ToDS=1, which makes the firmware
default to the BSSID as A1 and emit STA->AP-formatted frames
regardless of which peer the WCID points to.
For TDLS-paired peers this is wrong. Data frames go on air addressed
to the AP, the AP MAC-ACKs and silently drops them per IEEE 802.11z
(an AP must not forward to a TDLS-paired peer). Management and
control frames bypass the HW encap path and still reach the peer;
only user data fails.
Add MT_WCID_FLAG_TDLS_PEER, set it in mt7915, mt7921, mt7925 and
mt7996 sta-add paths when sta->tdls is true, and override the
HDR_TRANS TLV in mt76_connac_mcu_wtbl_hdr_trans_tlv() (Connac2 -
mt7915 / mt7921 / mt7922), mt7925_mcu_sta_hdr_trans_tlv() (mt7925)
and mt7996_mcu_sta_hdr_trans_tlv() (mt7996) to set ToDS=0, FromDS=0
when the flag is set. The 3-addr non-DS form matches what 802.11z
uses for direct links; the firmware then constructs the frame with
A1=peer rather than A1=BSSID. HW encap offload remains enabled for
AP and any non-TDLS traffic.
Verified on mt7925e + Samsung S938B over a 5 GHz HE 80 MHz channel
with iperf3 -t 30 to the TDLS peer:
before fix: over the TDLS direct link, 7 TDLS Setup action
frames and 3 RTS frames reach the peer; 0 QoS
Data frames make it through (mgmt/control paths
bypass HW encap, the data path does not). iperf3
stalls.
after fix: 2.90 GBytes transferred at 830 Mbit/s sustained,
0 TCP retransmits.
mt7915, mt7921, mt7922 and mt7996 are not regression-tested in this
change for lack of hardware. Their HDR_TRANS handling mirrors the
verified mt7925 change; the firmware behavior is shared across these
chips.
Signed-off-by: ElXreno <elxreno@gmail.com>
Assisted-by: Claude:claude-opus-4-7 bpftrace tcpdump
Link: https://patch.msgid.link/20260506-mt7925-tdls-fixes-v2-1-46aa826ba8bb@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This patch is based on a BUG as reported by Bongani Hlope at
https://lore.kernel.org/all/20260502125824.425d7159@bongani-mini.home.org.za/
When a channel-switch announcement (CSA) beacon is received,
cfg80211 queues a wiphy work item that eventually calls
mt7921_channel_switch_rx_beacon(). If the station disconnects
(or the channel context is otherwise torn down) between the
time the work is queued and the time it runs, the driver's
dev->new_ctx pointer can already have been cleared to NULL.
mt7921_channel_switch_rx_beacon() then dereferences new_ctx
unconditionally, triggering a NULL pointer dereference at
address 0x0:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:mt7921_channel_switch_rx_beacon+0x1f/0x100 [mt7921_common]
The same missing guard exists in mt7925_channel_switch_rx_beacon(),
which shares the same code pattern introduced by the same commit.
Add an early-return NULL check for dev->new_ctx in both
mt7921_channel_switch_rx_beacon() and
mt7925_channel_switch_rx_beacon(). When new_ctx is NULL there is
no pending channel switch to process, so returning immediately is
the correct and safe action.
Fixes: 8aa2f59260 ("wifi: mt76: mt7921: introduce CSA support")
Reported-by: Bongani Hlope <developer@hlope.org.za>
Oops-Analysis: http://oops.fenrus.org/reports/lkml/20260502125824.425d7159@bongani-mini.home.org.za/report.html
Link: https://lore.kernel.org/all/20260502125824.425d7159@bongani-mini.home.org.za/
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Link: https://patch.msgid.link/20260504145107.1329197-1-arjan@linux.intel.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Check return value instead of is_valid_ether_addr. The latter is handled
by the former.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260427051746.954704-1-rosenp@gmail.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7925_pci_probe() initializes DMA before registering the device. If
mt7925_register_device() fails, probe returns through err_free_irq without
tearing down DMA state.
That leaves the TX NAPI instance enabled and skips the DMA queue cleanup
that the normal remove path performs through mt7925e_unregister_device().
Add a dedicated unwind label for failures after mt7925_dma_init() succeeds.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Co-developed-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Ijae Kim <ae878000@gmail.com>
Signed-off-by: Myeonghun Pak <mhun512@gmail.com>
Link: https://patch.msgid.link/20260426143728.41534-1-pakmyeonghun@bagmyeonghun-ui-MacBookPro.local
Signed-off-by: Felix Fietkau <nbd@nbd.name>
ieee80211_s1g_check_tim() parses the S1G Partial Virtual Bitmap (PVB) of a
received TIM element. The TIM is handed in as the element payload:
ieee802_11_parse_elems_full() stores elems->tim = elem->data and
elems->tim_len = elem->datalen (net/mac80211/parse.c), so the valid bytes
are [tim, tim + tim_len).
When walking the encoded blocks the function passes the walker an end
sentinel of (const u8 *)tim + tim_len + 2, i.e. two bytes past the end of
the element. ieee80211_s1g_find_target_block() loops while (ptr + 1 <= end)
and dereferences ptr (and the per-mode ieee80211_s1g_len_*() helpers read
*ptr), so it can read up to two bytes beyond the TIM element -- an
out-of-bounds read of adjacent skb/heap data when the TIM is the last
element in the frame. The +2 appears to account for the element id/len
header, but tim already points past that header at the element payload, so
the addend is wrong.
Pass the correct element end, (const u8 *)tim + tim_len.
Fixes: e0c47c6229 ("wifi: mac80211: support parsing S1G TIM PVB")
Signed-off-by: Bryam Vargas <hexlabsecurity@proton.me>
Link: https://patch.msgid.link/20260606074341.49135-1-hexlabsecurity@proton.me
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 converts 802.3 multicast packets to 802.11 format
before driver TX, even when Ethernet encapsulation offload
is enabled. This prevents drivers that support multicast
Ethernet encapsulation offload from receiving frames in
native 802.3 format.
Introduce the IEEE80211_OFFLOAD_ENCAP_MCAST flag to bypass the
802.11 encapsulation step and pass the multicast packet to the
driver in 802.3 format. Drivers that support multicast Ethernet
encapsulation offload can advertise this flag.
Disable multicast encapsulation offload in MLO case for drivers not
advertising MLO_MCAST_MULTI_LINK_TX support for AP mode and for
3-address AP_VLAN multicast packets.
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604162403.1563729-4-tamizh.raja@oss.qualcomm.com
[fix unlikely(), indentation]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mac80211 already supports multicast-to-unicast conversion for
native 802.11 TX paths, but this handling is missing for the
802.3 transmit path. Due to that the packet never converted to
unicast and directly pass it to 802.11 Tx path by checking the
destination address as multicast.
Extend ieee80211_subif_start_xmit_8023() to honor the
multicast_to_unicast setting by cloning and converting multicast
Ethernet frames into per-station unicast transmissions, following
the same behavior of the native 802.11 TX path and allow it
to take 802.3 path.
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604162403.1563729-3-tamizh.raja@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently ieee80211_8023_xmit() accesses the sta pointer without any
sanity check, assuming that only unicast packets for an authorized
station are processed. But the sta pointer could become NULL when
a framework to support 802.3 offload for the multicast packets is
added in the follow-up patches. Add the valid sta pointer sanity
check to avoid the invalid pointer access.
This aligns with some of the subordinate functions called by
ieee80211_8023_xmit() that already NULL-check 'sta' such as
ieee80211_select_queue() and ieee80211_aggr_check().
Signed-off-by: Tamizh Chelvam Raja <tamizh.raja@oss.qualcomm.com>
Link: https://patch.msgid.link/20260604162403.1563729-2-tamizh.raja@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, ie_len in cfg80211_notify_new_peer_candidate is defined as
1-byte field, capping the maximum IE list size at 255 bytes. When a
large beacon is received, the IE list is truncated, passing incomplete
data to wpa_supplicant. This causes supplicant to fail parsing the IEs.
Increasing the size of ie_len to allow the full length of the IE list to
be forwarded properly.
Signed-off-by: Thiyagarajan Pandiyan <thiyagarajan@aerlync.com>
Link: https://patch.msgid.link/20260605054307.427874-1-thiyagarajan@aerlync.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Convert the separately-allocated reorder_buf pointer to a C99 flexible
array member at the end of struct tid_ampdu_rx, with both the
sk_buff_head and the jiffies timestamp in each array element. This
collapses three allocations into one and removes the corresponding
kfree() pairs from the error and free paths.
Assisted-by: opencode:big-pickle
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260605005627.317194-1-rosenp@gmail.com
[fix kernel-doc]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When building with a version of clang that supports
'-fms-anonymous-structs' (which will be used by the kernel instead of
the wider '-fms-extensions'), there are a couple warnings after some
recent mesg_hwmp.c changes:
net/mac80211/mesh_hwmp.c:373:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
373 | struct ieee80211_mesh_hwmp_preq_top *preq_elem_top =
| ^
net/mac80211/mesh_hwmp.c:390:3: error: label followed by a declaration is a C23 extension [-Werror,-Wc23-extensions]
390 | struct ieee80211_mesh_hwmp_prep_top *prep_elem_top =
| ^
2 errors generated.
Enclose the switch case blocks in braces to clear up the warning.
Fixes: a91c65cb99 ("wifi: mac80211: Use struct instead of macro for PREP frame")
Fixes: 4ac20bd40b ("wifi: mac80211: Use struct instead of macro for PREQ frame")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260604-mac80211-mesh_hwmp-fix-c23-extensions-v1-1-25a64d6ce541@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This pull request contains iwlwifi features and cleanups. Notably:
- Bump max core version for BZ/SC/DR to 106.
- Add KUnit tests for link grading, RSSI adjustment, and beacon
handling;
- Drop core101 support and remove TLC config v4/v5 compatibility code.
- Fixes:
Fix PCIe write pointer detection
Fix STEP_URM register address
Remove unneeded WoWLAN warning
reduce NIC wakeups during dump.
Revert MODULE_FIRMWARE relocation change
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQM3A3Pv7vbm9vtjWbacY7uyt+OfQUCaiA4nQAKCRDacY7uyt+O
fcECAQC8YSlz1duQiMiuLTQ1WJ55yG8hncvPlgvUwEUHD8E/wgEAgjHPS566XWfU
/H4pc3CEZT+w8LRHhvvJiYWXpmmnvgs=
=+5Cu
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-2026-06-03' of https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Miri Korenblit says:
====================
wifi: iwlwifi-next : updates - 2026-06-03
This pull request contains iwlwifi features and cleanups. Notably:
- Bump max core version for BZ/SC/DR to 106.
- Add KUnit tests for link grading, RSSI adjustment, and beacon
handling;
- Drop core101 support and remove TLC config v4/v5 compatibility code.
- Fixes:
Fix PCIe write pointer detection
Fix STEP_URM register address
Remove unneeded WoWLAN warning
reduce NIC wakeups during dump.
Revert MODULE_FIRMWARE relocation change
====================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In ath12k, add driver support for WDS mode.
In ath11k and ath12k, a number of cleanups and minor bug fixes.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCah7oAwAKCRAsFbugiYzL
e4FRAQDP7XeGi3lDh02TlRthSY1z1fw8dTnUoHrok3MozxwGrQEAztgSQg1wjERh
PAKcUibVH/ebQf5MHziPl+/ZR24RCwM=
=iZG5
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20260602' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v7.2 (PR #3)
In ath12k, add driver support for WDS mode.
In ath11k and ath12k, a number of cleanups and minor bug fixes.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The firmware version number check for IGTK introduced in
commit c34dbc5900 ("wifi: wlcore: Add support for IGTK key")
lets the amount of ciphers decrease on every boot of a too old firmware and
that is practically happening. It also does not take into account other
chips than the wl18xx. On some wl128x, the following can be observed
when connecting via nm to a common ap:
[ 484.113311] wlcore: WARNING could not set keys
[ 484.117828] wlcore: ERROR Could not add or replace key
[ 484.123016] wlan0: failed to set key (5, ff:ff:ff:ff:ff:ff) to hardware (-5)
[ 484.123046] wlcore: Hardware recovery in progress. FW ver: Rev 7.3.10.0.142
[ 484.139923] wlcore: pc: 0x0, hint_sts: 0x00000048 count: 1
[ 484.145721] wlcore: down
[ 484.148986] ieee80211 phy0: Hardware restart was requested
[ 484.610473] wlcore: firmware booted (Rev 7.3.10.0.142)
[ 484.633758] wlcore: Association completed.
[ 484.690490] wlcore: ERROR command execute failure 14
[ 484.690490] ------------[ cut here ]------------
[ 484.700195] WARNING: drivers/net/wireless/ti/wlcore/main.c:872 at wl12xx_queue_recovery_work+0x64/0x74 [wlcore], CPU#0: kworker/0:0/892
This repeats endlessly.
Always disable IGTK on wl12xx and fix the decrementing mess.
Fixes: c34dbc5900 ("wifi: wlcore: Add support for IGTK key")
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Link: https://patch.msgid.link/20260604103316.377251-1-andreas@kemnade.info
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit d594cc6f2c ("wifi: mac80211: restore non-chanctx injection
behaviour") restored the monitor injection fallback for drivers using
chanctx emulation but explicitly deferred drivers that transitioned
to real chanctx ops. mt76 falls in that category and still drops
every injected frame when monitor coexists with another interface.
When the monitor has no chanctx of its own, fall back to the only
chanctx in flight if there is exactly one. Refuse if multiple are
present: picking arbitrarily would inject on an unrelated channel.
Emulated and real chanctx drivers both flow through this fallback,
since emulation always presents zero or one chanctx in
local->chanctx_list.
Reran the airgeddon evil-twin flow (hostapd AP + coexisting monitor
VIF on the same phy + aireplay-ng deauth from the monitor) on
mt7921e PCIe and mt7921u USB across 2.4 GHz and 5 GHz, and on a
Kali VM with MT7921U passthrough as the closest match to the
original reporter's setup. None reproduced the hang seen against
the earlier attempt at this fix
(<20251216111909.25076-2-johannes@sipsolutions.net>) or against v1
on lore in March.
Cc: <stable+noautosel@kernel.org> # causes some older drivers to crash
Reported-by: Oscar Alfonso Diaz <oscar.alfonso.diaz@gmail.com>
Closes: https://github.com/morrownr/USB-WiFi/issues/682
Tested-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Signed-off-by: 傅继晗 <fjhhz1997@gmail.com>
Signed-off-by: Devin Wittmayer <lucid_duck@justthetip.ca>
Link: https://patch.msgid.link/5c2760bd9bc34616bf7892848872522254dd1ce5.1780513445.git.lucid_duck@justthetip.ca
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add tests for PSD/EIRP RSSI adjustment which compensates measurements
when APs use PSD-based power scaling with bandwidth.
Tests cover all power types, bandwidths, and limiting scenarios.
Signed-off-by: Avinash Bhatt <avinash.bhatt@intel.com>
Link: https://patch.msgid.link/20260531135036.a18b8d0acd62.I68dfcc17359ab8a5abdc84e1e21db4ad1671af41@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
FW core102 bumped TLC_MNG_CONFIG_CMD_API_S from version 5 to
version 6. The v4 and v5 compatibility paths in
iwl_mld_send_tlc_cmd() are no longer reachable on any supported
firmware.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260531135036.c0e2dbfd0569.I44f8eb4d985bb9590b65b77e9a3dd157e4bd5e79@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
We don't acually need to always check the return value. For example, if
we send a command to remove an object - we can assume success
(if it fails it is probably because the fw is dead, and then it doesn't
have the object anyway).
Remove the annotations.
Link: https://patch.msgid.link/20260531135036.434473c7b29a.I455e0c3f93c25635df708da7d3216c183dbdbbbb@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
BZ, DR and SC no longer need to accept core101 firmware.
Raise the minimum supported firmware core from 101 to 102 so
these families only match supported core102 and newer images.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260531135036.4ece89be11a9.If00f9c7e011ec75219d28a38ca2077a926afc70e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
FW core102 removed both DC2DC_CONFIG_CMD_API_S and
DC2DC_CONFIG_CMD_RSP_API_S. The only driver-side artifact is
enum iwl_dc2dc_config_id in fw/api/config.h, which has no
callers in any .c file across all driver paths (mld/mvm/xvt).
Remove the dead definition.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260531135036.487ceed62714.I13cf8cc214c68899379112e8e52f0cd38dc7b6f8@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Ever since the TFD queue size is no longer limited to 256 entries,
this code has been wrong, and might erroneously not detect a move
if it was by a multiple of 256. Not a big deal, but fix it while
I see it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260531135036.87ffbeab298e.I4fae41383b6756bccbed250985e0521b68a40d0c@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Our binding handling for P2P-Device can run into the following
scenario, as observed by our testing:
- a station interface is connected on some channel
- the P2P-Device does a remain-on-channel (ROC) on that channel
- the ROC ends, and the P2P-Device is removed from the binding,
but the phy_ctxt pointer is left around as a PHY cache so we
don't need to recalibrate to the channel again and again in
case it's not shared
- a binding update by the station interface, even a removal,
will re-add the P2P-Device to the binding
- the P2P-Device is removed, which removes the PHY context, but
it's still in the binding so the firmware crashes
Since the P2P device is removed from the binding and only re-
added by unrelated code, but we want to keep the phy_ctxt around
as a cache for future ROC usage, fix it by adding a boolean that
indicates whether or not the P2P-Device should be added to the
binding, and handle that in the binding iterator. That way, the
station interface cannot re-add the P2P-Device to the binding
when that isn't active.
Assisted-by: Github Copilot:claude-opus-4-6
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.07f94335ae06.I384238b0859343c4a9a9dda20682be1aad89cc9d@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20260527230313.19720967372b.Iff30814510a26f9f609f98eeea3111c50c1afb31@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
IWL_BZ_UCODE_CORE_MAX is undefined in cfg/rf-fm.c, this
causes __stringify(core) to turn it into the literal
token text, so MODULE_FIRMWARE entries are generated as
"iwlwifi...-cIWL_BZ_UCODE_CORE_MAX.ucode",
instead of the actual number.
This reverts the commit below.
Signed-off-by: Shahar Tzarfati <shahar.tzarfati@intel.com>
Link: https://patch.msgid.link/20260527230313.a10bc3359dca.I446a1340c635f07aff3efaba5317635e010c156f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
While associated to MLD AP with active EMLSR, set all scan
operations as fast-balance scans. The only exception is when a
fragmented scan is planned (high traffic or low latency), in
which case the fragmented scan is preserved.
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Link: https://patch.msgid.link/20260527230313.32d278842b0e.Ia3d73e4085eefc4d3921e93de4107b2d6a6f922e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Add a new FW TLV (IWL_UCODE_TLV_FW_NAN_MAX_CHAN_SWITCH_TIME) that
allows the firmware to specify the NAN maximum channel switch time
in microseconds.
When the TLV is present, use its value for the NAN device capability.
Otherwise, fall back to the default of 4 milliseconds.
Signed-off-by: Israel Kozitz <israel.kozitz@intel.com>
Link: https://patch.msgid.link/20260527230313.e8ae1a3adacd.I15b933407ca3974a65047b63b4f9b00bed3520fb@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
The mimo field of the sta command is badly named. It really carries the
initial SMPS value as it is in the association request of the client
station (when we are the AP).
In NAN we don't have this information, just mark SMPS as disabled.
Link: https://patch.msgid.link/20260527230313.abd136be474e.I9eb663d953b482236345ffbcb611f28facea83c1@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Given that we now use v3 rates with FW index throughout,
_to_hwrate() is confusing, since the hardware still uses
the PLCP value, the driver just doesn't see that now (as
it talks to firmware, not hardware.)
Rename this to iwl_mvm_rate_idx_to_fw_idx() to more
clearly indicate what it's doing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.a60c8aea5b6c.I6af48d5d9748e184eed9d3437d312291cab61d7f@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
We dereference the mld_sta pointer before checking for NULL.
But we do check the sta pointer, and sta != NULL means mld_sta != NULL,
so there is no real issue.
Fix it anyway to silence the warning.
Link: https://patch.msgid.link/20260527200512.506707-2-miriam.rachel.korenblit@intel.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Currently, the dump code attempts to dump any number of
memories and register banks, as defined by the firmware.
Especially when the device is failing, this can lead to
excessive time spent attempting to acquire NIC access
over and over again.
Improve the code to only attempt to acquire NIC access
once or twice, but using the new memory dump functions
that may drop the spinlock etc. Mark all dump regions
that require NIC access, and skip them if we couldn't
obtain that.
In order to avoid CPU latency due to the increased time
holding the spinlock (and possibly disabling softirqs),
drop locks and call cond_resched() after each section
(if holding NIC access) but don't release HW NIC access.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260527230313.bec886142cc8.I41f2eaf2403b38147504d5dab0a7414de2699adc@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
AX231 is a device that is based on AX211 that doesn't support 6E and
its bandwidth is limited to 80 MHz.
Just reuse the radio config from AX203 which has the exact same
characteristics.
It has a specific subdevice ID to allow the driver to differentiate
between AX211 and AX231.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20260512082114.0685ed313987.Ibcfa24e196ac778405d2843f0984b66ca167704e@changeid
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Pull-request includes many random fixes and new features.
Major changes are listed below:
rtl8xxxu:
* declare supported channel width by firmware report
rtw88:
* validate RX descriptor to avoid malformed data causing warnings
rtw89:
* support USB devices RTL8922AU
* add sysfs entry to show SN and UUID for specific USB devices
* support to switch USB 3.0 mode for higher performance
* add more fields (mainly SIG-A/SIG-B) to radiotap in monitor mode
* offload packed IO to firmware to reduce IO time (for USB devices)
* add debugfs to diagnose BB healthy
* more preparations for RTL8922DE
-----BEGIN PGP SIGNATURE-----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=7iaf
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2026-06-03' of https://github.com/pkshih/rtw
Ping-Ke Shih says:
==================
rtw-next patches for -next
Pull-request includes many random fixes and new features.
Major changes are listed below:
rtl8xxxu:
* declare supported channel width by firmware report
rtw88:
* validate RX descriptor to avoid malformed data causing warnings
rtw89:
* support USB devices RTL8922AU
* add sysfs entry to show SN and UUID for specific USB devices
* support to switch USB 3.0 mode for higher performance
* add more fields (mainly SIG-A/SIG-B) to radiotap in monitor mode
* offload packed IO to firmware to reduce IO time (for USB devices)
* add debugfs to diagnose BB healthy
* more preparations for RTL8922DE
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
