Gal recently complained:
When [ksft_wait failure] happens, the test fails with a cryptic
message:
# Exception| Exception: Did not receive ready message
Let's try to include the stdout/stderr of the command we tried
to start. E.g. for cmd("false", ksft_wait=True):
# Exception| lib.py.utils.CmdInitFailure: Did not receive ready message
# Exception| CMD: false
# Exception| EXIT: 1
We need to factor out _process_terminate() otherwise the exit
path may try to write to already disconnected self.ksft_term_fd.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260223202633.4126087-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bkg() failures are currently quite hard to debug and spot.
Often we have code along the lines of:
with bkg("./cmd_rx_something -p PORT"):
wait_port_listen(PORT)
cmd("./cmd_tx_something", host=remote)
When wait_port_listen() fails we don't get to see the exit status
of bkg(). Even tho very often it's a failure in the bkg() command
that's actually to blame. Try not to interfere with the bkg()
command error checking.
With:
with bkg("false", exit_wait=True):
time.sleep(0.01) # let the 'false' cmd run
raise Exception("bla")
Before:
.. stack trace ..
# Exception| Exception: bla
After:
.. stack trace ..
# Exception| Exception: bla
# Exception|
# Exception| During handling of the above exception, another exception occurred:
.. stack trace ..
# Exception| lib.py.utils.CmdExitFailure: Command failed: false
# Exception| STDOUT: b''
# Exception| STDERR: b''
Reviewed-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260223202633.4126087-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We recently added GRO stats to bnxt, which are maintained
by the driver. Having "err" in the name of the struct for
ring stats no longer makes sense (as pointed out by Michael,
see Link).
Rename them to "drv" stats, as these are all maintained
by the driver (even if partially based on info from descriptors).
Michael suggested calling these misc, happy to go back to
that. IMHO "drv" is a bit more meaningful that "misc".
Pure rename using sed, no functional changes.
Link: https://lore.kernel.org/CACKFLimgibJ0qkM1AacZVh8MKKy-pE_AAc4KPKZ7GUqebmXW9A@mail.gmail.com
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260223203702.4137801-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These sysctls were added in 4cdf507d54 ("icmp: add a global rate
limitation") and their default values might be too small.
Some network tools send probes to closed UDP ports from many hosts
to estimate proportion of packet drops on a particular target.
This patch sets both sysctls to 10000.
Note the per-peer rate-limit (as described in RFC 4443 2.4 (f))
intent is still enforced.
This also increases security, see b38e7819ca
("icmp: randomize the global rate limiter") for reference.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223161742.929830-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function is only called from tcp_v6_mtu_reduced() and can be
(auto)inlined by the compiler.
Note that inet6_csk_route_socket() is no longer (auto)inlined,
which is a good thing as it is slow path.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/2 grow/shrink: 2/0 up/down: 93/-129 (-36)
Function old new delta
tcp_v6_mtu_reduced 139 228 +89
inet6_csk_route_socket 486 490 +4
__pfx_inet6_csk_update_pmtu 16 - -16
inet6_csk_update_pmtu 113 - -113
Total: Before=25076512, After=25076476, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223153047.886683-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For RPC workloads, we alternate tcp_schedule_loss_probe() calls from
output path and from input path, with tp->packets_out value
oscillating between !zero and zero, leading to poor branch prediction.
Move tp->packets_out check from tcp_schedule_loss_probe() to
tcp_set_xmit_timer().
We avoid one call to tcp_schedule_loss_probe() from tcp_ack()
path for typical RPC workloads, while improving branch prediction.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223113501.4070245-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: qcom-ethqos: cleanups and re-organise SerDes handling
As the last series had issues with stability, I've changed the approach
in this series to concentrate on keeping much of the SerDes related
code within the qcom-ethqos driver rather than trying to move it out at
this stage. This means it should be possible to bisect these patches and
pinpoint exactly the code movement that causes any instability.
This series starts with various cleanups to qcom-ethqos (the first four
patches) before beginning to move code, passing phylink's phy interface
(which will change) to the fix_mac_speed() method, and then using that
to configure the serdes and inband setting before moving the SerDes
code.
This patch set has been tested.
====================
Link: https://patch.msgid.link/aZwfAFJQcp9f0niI@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set the RGMII link clock using the set_clk_tx_rate() method rather than
coding it into the .fix_mac_speed() method. This simplifies ethqos's
ethqos_fix_mac_speed().
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSLF-0000000ASci-42kh@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the SerDes speed configuration to phylink's .mac_finish() stage
so that the SerDes is appropriately configured for the interface mode
prior to the link coming up.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSLA-0000000AScc-3RFf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qcom-ethqos currently forces inband to be enabled for the Cisco SGMII
speeds (1G, 100M and 10M) but not for 2500BASE-X (2.5G).
Rather than using the speed to determine the forced inband state, use
phylink's PHY interface mode which will switch between SGMII for the
10M, 100M and 1G speeds, and 2500BASE-X for 2.5G.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSL5-0000000AScX-2wuM@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the current phylink phy interface mode to the RGMII and "SGMII"
configuration functions.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSL0-0000000AScM-2TN0@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the current interface mode reported by phylink into the
fix_mac_speed() method. This will be used by qcom-ethqos for its
"SGMII" configuration.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKv-0000000AScG-1zv6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Loopback is enabled to allow the dwmac soft reset to succeed. This
is enabled when clocks are enabled in ethqos_clks_config(), which
happens at driver probe and runtime PM resume - e.g. when the
network device is administratively brought up.
Currently, the loopback is disabled when the link comes up (via
.mac_link_up() calling this driver's .fix_mac_speed().)
Move the qcom_ethqos_set_sgmii_loopback() call which disables
loopback from ethqos_fix_mac_speed() into ethqos' SerDes specific
.mac_finish() method so that loopback is disabled a little earlier
after reset has completed, and dwmac setup has completed.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKq-0000000AScA-1Wh3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ethqos_set_func_clk_en() configures both SGMII loopback and the RGMII
functional clock setting. qcom_ethqos_set_sgmii_loopback() is only
called from within ethqos_set_func_clk_en(), and checks for
PHY_INTERFACE_MODE_2500BASEX.
Move qcom_ethqos_set_sgmii_loopback() to the callers of
ethqos_set_func_clk_en() except for ethqos_configure_rgmii() where we
know that ethqos->phy_mode will not be PHY_INTERFACE_MODE_2500BASEX.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKl-0000000ASc1-18ka@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethqos_configure*() family of functions always return zero, and the
return value is never checked. Change the int return type to void.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKg-0000000ASbv-0iWL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the register field values to something more human readable.
For example, using (BIT(29) | BIT(27)) to update a register field that
consists of bits 29:27 is an obfuscated way of writing decimal 5 for
this field. The comment above needs to explain that this value is 5.
Worse still is BIT(12) | GENMASK(9, 8), which is used to hide the
decimal value 19 for the bitfield 16:8.
Fix these, and a few others by using FIELD_PREP(). While it means we
have bare numeric constants, this is more preferable than having the
obfuscation.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKa-0000000ASbo-2zQg@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename the "por" and "num_por" members to indicate that they are for
RGMII mode only as ethqos_configure_rgmii() is the only place that the
values are programmed into the registers.
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vuSKV-0000000ASbg-28JK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Satish Kharat says:
====================
eth: enic: add VIC ids and link modes
Add VIC subsystem ids and their supported/advertised media types so ethtool
reflects the hardware capabilities for the VIC variants.
====================
Link: https://patch.msgid.link/20260223-enic-cscwi36355-v2-0-63488194a974@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing documentation for a neighbor table garbage collector sysctl
parameter in ip-sysctl.rst:
neigh/default/gc_stale_time: controls how long an unused neighbor entry
is kept before becoming eligible for garbage collection (default: 60
seconds)
Signed-off-by: Gabriel Goller <g.goller@proxmox.com>
Link: https://patch.msgid.link/20260223101257.47563-1-g.goller@proxmox.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
tcp: rework tcp_v{4,6}_send_check()
tcp_v{4,6}_send_check() are only called from __tcp_transmit_skb()
They currently are in different files (tcp_ipv4.c and tcp_ipv6.c)
thus out of line.
This series move them close to their caller so that compiler
can inline them.
For all patches in the series:
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.3
add/remove: 0/2 grow/shrink: 1/3 up/down: 102/-178 (-76)
Function old new delta
__tcp_transmit_skb 3321 3423 +102
tcp_v4_send_check 136 132 -4
__tcp_v4_send_check 130 121 -9
mptcp_subflow_init 777 763 -14
__pfx_tcp_v6_send_check 16 - -16
tcp_v6_send_check 135 - -135
Total: Before=25143100, After=25143024, chg -0.00%
====================
Link: https://patch.msgid.link/20260223100729.3761597-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_v{4,6}_send_check() are only called from tcp_output.c
and should be made static so that the compiler does not need
to put an out of line copy of them.
Remove (struct inet_connection_sock_af_ops) send_check field
and use instead @net_header_len.
Move @net_header_len close to @queue_xmit for data locality
as both are used in TCP tx fast path.
$ scripts/bloat-o-meter -t vmlinux.2 vmlinux.3
add/remove: 0/2 grow/shrink: 0/3 up/down: 0/-172 (-172)
Function old new delta
__tcp_transmit_skb 3426 3423 -3
tcp_v4_send_check 136 132 -4
mptcp_subflow_init 777 763 -14
__pfx_tcp_v6_send_check 16 - -16
tcp_v6_send_check 135 - -135
Total: Before=25143196, After=25143024, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223100729.3761597-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Inline __tcp_v4_send_check(), like __tcp_v6_send_check().
Move tcp_v4_send_check() to tcp_output.c close to
its fast path caller (__tcp_transmit_skb()).
Note __tcp_v4_send_check() is still out-of-line for tcp4_gso_segment()
because it is called in an unlikely() section.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-9 (-9)
Function old new delta
__tcp_v4_send_check 130 121 -9
Total: Before=25143100, After=25143091, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223100729.3761597-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This function has a single caller in net/ipv6/udp.c.
Move it there so that the compiler can decide to (auto)inline
it if he prefers to. IBT glue is removed anyway.
With clang, we can see it was able to inline it and also
inlined one other helper at the same time.
UDPLITE removal will also help.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/2 grow/shrink: 1/0 up/down: 840/-785 (55)
Function old new delta
__udp6_lib_rcv 1247 2087 +840
__pfx_udp6_csum_init 16 - -16
udp6_csum_init 769 - -769
Total: Before=25074399, After=25074454, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223093445.3696368-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit 6511882cdd ("mptcp: allocate fwd memory separately
on the rx and tx path") __lock_sock() can be static again.
Make sure __lock_sock() is not inlined, so that lock_sock_nested()
no longer needs a stack canary.
Add a noinline attribute on lock_sock_nested() so that calls
to lock_sock() from net/core/sock.c are not inlined,
none of them are fast path to deserve that:
- sockopt_lock_sock()
- sock_set_reuseport()
- sock_set_reuseaddr()
- sock_set_mark()
- sock_set_keepalive()
- sock_no_linger()
- sock_bindtoindex()
- sk_wait_data()
- sock_set_rcvbuf()
$ scripts/bloat-o-meter -t vmlinux.old vmlinux
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-312 (-312)
Function old new delta
__lock_sock 192 188 -4
__lock_sock_fast 239 86 -153
lock_sock_nested 227 72 -155
Total: Before=24888707, After=24888395, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260223092716.3673939-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using set() removes duplicates but breaks ordering.
Test output should be deterministic, so replace with dict.fromkeys().
Signed-off-by: Naveen Anandhan <mr.navi8680@gmail.com>
Link: https://patch.msgid.link/20260222095536.17371-1-mr.navi8680@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
commit 81c734dae2 ("ip6_tunnel: use skb_vlan_inet_prepare() in
__ip6_tnl_rcv()") was fine in and of itself, but its backport to 6.12
(and 6.6) broke IPv4-in-IPv6 tunneling, see [1]. This adds a self-test
for basic IPv4-in-IPv6 and IPv6-in-IPv6 functionality.
[1]: https://lore.kernel.org/all/CAA2RiuSnH_2xc+-W6EnFEG00XjS-dszMq61JEvRjcGS31CBw=g@mail.gmail.com/
Signed-off-by: Linus Heckemann <git@sphalerite.org>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ricardo B. Marlière <rbm@suse.com>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260221114806.1231666-1-git@sphalerite.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qSCj
-----END PGP SIGNATURE-----
Merge tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
-----BEGIN PGP SIGNATURE-----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=mb+y
-----END PGP SIGNATURE-----
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Fix invalid write loop logic in libbpf's bpf_linker__add_buf() (Amery
Hung)
- Fix a potential use-after-free of BTF object (Anton Protopopov)
- Add feature detection to libbpf and avoid moving arena global
variables on older kernels (Emil Tsalapatis)
- Remove extern declaration of bpf_stream_vprintk() from libbpf headers
(Ihor Solodrai)
- Fix truncated netlink dumps in bpftool (Jakub Kicinski)
- Fix map_kptr grace period wait in bpf selftests (Kumar Kartikeya
Dwivedi)
- Remove hexdump dependency while building bpf selftests (Matthieu
Baerts)
- Complete fsession support in BPF trampolines on riscv (Menglong Dong)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Remove hexdump dependency
libbpf: Remove extern declaration of bpf_stream_vprintk()
selftests/bpf: Use vmlinux.h in test_xdp_meta
bpftool: Fix truncated netlink dumps
libbpf: Delay feature gate check until object prepare time
libbpf: Do not use PROG_TYPE_TRACEPOINT program for feature gating
bpf: Add a map/btf from a fd array more consistently
selftests/bpf: Fix map_kptr grace period wait
selftests/bpf: enable fsession_test on riscv64
selftests/bpf: Adjust selftest due to function rename
bpf, riscv: add fsession support for trampolines
bpf: Fix a potential use-after-free of BTF object
bpf, riscv: introduce emit_store_stack_imm64() for trampoline
libbpf: Fix invalid write loop logic in bpf_linker__add_buf()
libbpf: Add gating for arena globals relocation feature
Since commit 9c328f5474 ("net: nfc: nci: Add parameter validation for
packet data") communication with nci nfc chips is not working any more.
The mentioned commit tries to fix access of uninitialized data, but
failed to understand that in some cases the data packet is of variable
length and can therefore not be compared to the maximum packet length
given by the sizeof(struct).
Fixes: 9c328f5474 ("net: nfc: nci: Add parameter validation for packet data")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at>
Reported-by: syzbot+740e04c2a93467a0f8c8@syzkaller.appspotmail.com
Link: https://patch.msgid.link/20260218083000.301354-1-michael.thalmeier@hale.at
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tariq Toukan says:
====================
mlx5 misc fixes 2026-02-18
This patchset provides misc bug fixes from the team to the mlx5
core and Eth drivers.
====================
Link: https://patch.msgid.link/20260218072904.1764634-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The max number of channels is always an unsigned int, use the correct
type to fix compilation errors done with strict type checking, e.g.:
error: call to ‘__compiletime_assert_1110’ declared with attribute
error: min(mlx5e_get_devlink_param_num_doorbells(mdev),
mlx5e_get_max_num_channels(mdev)) signedness error
Fixes: 74a8dadac1 ("net/mlx5e: Preparations for supporting larger number of channels")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the mentioned "Fixes" commit, various work tasks triggering devlink
health reporter recovery were switched to use netdev_trylock to protect
against concurrent tear down of the channels being recovered. But this
had the side effect of introducing potential deadlocks because of
incorrect lock ordering.
The correct lock order is described by the init flow:
probe_one -> mlx5_init_one (acquires devlink lock)
-> mlx5_init_one_devl_locked -> mlx5_register_device
-> mlx5_rescan_drivers_locked -...-> mlx5e_probe -> _mlx5e_probe
-> register_netdev (acquires rtnl lock)
-> register_netdevice (acquires netdev lock)
=> devlink lock -> rtnl lock -> netdev lock.
But in the current recovery flow, the order is wrong:
mlx5e_tx_err_cqe_work (acquires netdev lock)
-> mlx5e_reporter_tx_err_cqe -> mlx5e_health_report
-> devlink_health_report (acquires devlink lock => boom!)
-> devlink_health_reporter_recover
-> mlx5e_tx_reporter_recover -> mlx5e_tx_reporter_recover_from_ctx
-> mlx5e_tx_reporter_err_cqe_recover
The same pattern exists in:
mlx5e_reporter_rx_timeout
mlx5e_reporter_tx_ptpsq_unhealthy
mlx5e_reporter_tx_timeout
Fix these by moving the netdev_trylock calls from the work handlers
lower in the call stack, in the respective recovery functions, where
they are actually necessary.
Fixes: 8f7b00307b ("net/mlx5e: Convert mlx5 netdevs to instance locking")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The macsec_aso_set_arm_event function calls mlx5_aso_poll_cq once
without a retry loop. If the CQE is not immediately available after
posting the WQE, the function fails unnecessarily.
Use read_poll_timeout() to poll 3-10 usecs for CQE, consistent with
other ASO polling code paths in the driver.
Fixes: 739cfa3451 ("net/mlx5: Make ASO poll CQ usable in atomic context")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The write combining completion poll loop uses usleep_range() which can
sleep much longer than requested due to scheduler latency. Under load,
we witnessed a 20ms+ delay until the process was rescheduled, causing
the jiffies based timeout to expire while the thread is sleeping.
The original do-while loop structure (poll, sleep, check timeout) would
exit without a final poll when waking after timeout, missing a CQE that
arrived during sleep.
Instead of the open-coded while loop, use the kernel's poll_timeout_us()
which always performs an additional check after the sleep expiration,
and is less error-prone.
Note: poll_timeout_us() doesn't accept a sleep range, by passing 10
sleep_us the sleep range effectively changes from 2-10 to 3-10 usecs.
Fixes: d98995b4bf ("net/mlx5: Reimplement write combining test")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ASO completion poll loop uses usleep_range() which can sleep much
longer than requested due to scheduler latency. Under load, we witnessed
a 20ms+ delay until the process was rescheduled, causing the jiffies
based timeout to expire while the thread is sleeping.
The original do-while loop structure (poll, sleep, check timeout) would
exit without a final poll when waking after timeout, missing a CQE that
arrived during sleep.
Instead of the open-coded while loop, use the kernel's
read_poll_timeout() which always performs an additional check after the
sleep expiration, and is less error-prone.
Note: read_poll_timeout() doesn't accept a sleep range, by passing 10
sleep_us the sleep range effectively changes from 2-10 to 3-10 usecs.
Fixes: 739cfa3451 ("net/mlx5: Make ASO poll CQ usable in atomic context")
Fixes: 7e3fce82d9 ("net/mlx5e: Overcome slow response for first macsec ASO WQE")
Signed-off-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver is using num_vhca_ports capability to distinguish between
multiport master device and multiport slave device. num_vhca_ports is a
capability the driver sets according to the MAX num_vhca_ports
capability reported by FW. On the other hand, light SFs doesn't set the
above capbility.
This leads to wrong results whenever light SFs is checking whether he is
a multiport master or slave.
Therefore, use the MAX capability to distinguish between master and
slave devices.
Fixes: e71383fb9c ("net/mlx5: Light probe local SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HWRM_FUNC_CFG is used to reserve resources, whereas HWRM_FUNC_QCFG is
intended for querying resource information from the firmware.
Since __bnge_hwrm_reserve_pf_rings() reserves resources for a specific
PF, the command type should be HWRM_FUNC_CFG.
Fixes: 627c67f038 ("bng_en: Add resource management support")
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Bhargava Chenna Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260218052755.4097468-1-vikas.gupta@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KMSAN reported an uninit-value access in __inet_bind() when binding
an RDS TCP socket.
The uninitialized memory originates from rds_tcp_conn_alloc(),
which uses kmem_cache_alloc() to allocate the rds_tcp_connection structure.
Specifically, the field 't_client_port_group' is incremented in
rds_tcp_conn_path_connect() without being initialized first:
if (++tc->t_client_port_group >= port_groups)
Since kmem_cache_alloc() does not zero the memory, this field contains
garbage, leading to the KMSAN report.
Fix this by using kmem_cache_zalloc() to ensure the structure is
zero-initialized upon allocation.
Reported-by: syzbot+aae646f09192f72a68dc@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=aae646f09192f72a68dc
Tested-by: syzbot+aae646f09192f72a68dc@syzkaller.appspotmail.com
Fixes: a20a699255 ("net/rds: Encode cp_index in TCP source port")
Signed-off-by: Tabrez Ahmed <tabreztalks@gmail.com>
Reviewed-by: Charalampos Mitrodimas <charmitro@posteo.net>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260217135350.33641-1-tabreztalks@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Save a local pointer to new_sock->sk and hold a reference before
installing callbacks in rds_tcp_accept_one. After
rds_tcp_set_callbacks() or rds_tcp_reset_callbacks(), tc->t_sock is
set to new_sock which may race with the shutdown path. A concurrent
rds_tcp_conn_path_shutdown() may call sock_release(), which sets
new_sock->sk = NULL and may eventually free sk when the refcount
reaches zero.
Subsequent accesses to new_sock->sk->sk_state would dereference NULL,
causing the crash. The fix saves a local sk pointer before callbacks
are installed so that sk_state can be accessed safely even after
new_sock->sk is nulled, and uses sock_hold()/sock_put() to ensure
sk itself remains valid for the duration.
Fixes: 826c1004d4 ("net/rds: rds_tcp_conn_path_shutdown must not discard messages")
Reported-by: syzbot+96046021045ffe6d7709@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=96046021045ffe6d7709
Signed-off-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260216222643.2391390-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Total patches: 7
Reviews/patch: 0.57
Reviewed rate: 42%
- The 2 patch series "two fixes in kho_populate()" from Ran Xiaokai
fixes a couple of not-major issues in the kexec handover code.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaZaKBAAKCRDdBJ7gKXxA
jpB1AP9UpNzT63aGDnB6G8pgekSdK/I2gypZI3cS7MpBPorRUgEAhcClc2//zWGK
0Wz1rxh3sWIE/pzd/yOEsv+7oQHeDQA=
=oUp2
-----END PGP SIGNATURE-----
Merge tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more non-MM updates from Andrew Morton:
- "two fixes in kho_populate()" fixes a couple of not-major issues in
the kexec handover code (Ran Xiaokai)
- misc singletons
* tag 'mm-nonmm-stable-2026-02-18-19-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib/group_cpus: handle const qualifier from clusters allocation type
kho: remove unnecessary WARN_ON(err) in kho_populate()
kho: fix missing early_memunmap() call in kho_populate()
scripts/gdb: implement x86_page_ops in mm.py
objpool: fix the overestimation of object pooling metadata size
selftests/memfd: use IPC semaphore instead of SIGSTOP/SIGCONT
delayacct: fix build regression on accounting tool
Total patches: 36
Reviews/patch: 1.77
Reviewed rate: 83%
- The 2 patch series "mm/vmscan: fix demotion targets checks in
reclaim/demotion" from Bing Jiao fixes a couple of issues in the
demotion code - pages were failed demotion and were finding themselves
demoted into disallowed nodes.
- The 11 patch series "Remove XA_ZERO from error recovery of dup_mmap()"
from Liam Howlett fixes a rare mapledtree race and performs a number of
cleanups.
- The 13 patch series "mm: add bitmap VMA flag helpers and convert all
mmap_prepare to use them" from Lorenzo Stoakes implements a lot of
cleanups following on from the conversion of the VMA flags into a
bitmap.
- The 5 patch series "support batch checking of references and unmapping
for large folios" from Baolin Wang implements batching to greatly
improve the performance of reclaiming clean file-backed large folios.
- The 3 patch series "selftests/mm: add memory failure selftests" from
Miaohe Lin does as claimed.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaZaIEQAKCRDdBJ7gKXxA
jj73AQCQDwLoipDiQRGyjB5BDYydymWuDoiB1tlDPHfYAP3b/QD/UQtVlOEXqwM3
naOKs3NQ1pwnfhDaQMirGw2eAnJ1SQY=
=6Iif
-----END PGP SIGNATURE-----
Merge tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
- "mm/vmscan: fix demotion targets checks in reclaim/demotion" fixes a
couple of issues in the demotion code - pages were failed demotion
and were finding themselves demoted into disallowed nodes (Bing Jiao)
- "Remove XA_ZERO from error recovery of dup_mmap()" fixes a rare
mapledtree race and performs a number of cleanups (Liam Howlett)
- "mm: add bitmap VMA flag helpers and convert all mmap_prepare to use
them" implements a lot of cleanups following on from the conversion
of the VMA flags into a bitmap (Lorenzo Stoakes)
- "support batch checking of references and unmapping for large folios"
implements batching to greatly improve the performance of reclaiming
clean file-backed large folios (Baolin Wang)
- "selftests/mm: add memory failure selftests" does as claimed (Miaohe
Lin)
* tag 'mm-stable-2026-02-18-19-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (36 commits)
mm/page_alloc: clear page->private in free_pages_prepare()
selftests/mm: add memory failure dirty pagecache test
selftests/mm: add memory failure clean pagecache test
selftests/mm: add memory failure anonymous page test
mm: rmap: support batched unmapping for file large folios
arm64: mm: implement the architecture-specific clear_flush_young_ptes()
arm64: mm: support batch clearing of the young flag for large folios
arm64: mm: factor out the address and ptep alignment into a new helper
mm: rmap: support batched checks of the references for large folios
tools/testing/vma: add VMA userland tests for VMA flag functions
tools/testing/vma: separate out vma_internal.h into logical headers
tools/testing/vma: separate VMA userland tests into separate files
mm: make vm_area_desc utilise vma_flags_t only
mm: update all remaining mmap_prepare users to use vma_flags_t
mm: update shmem_[kernel]_file_*() functions to use vma_flags_t
mm: update secretmem to use VMA flags on mmap_prepare
mm: update hugetlbfs to use VMA flags on mmap_prepare
mm: add basic VMA flag operation helper functions
tools: bitmap: add missing bitmap_[subset(), andnot()]
mm: add mk_vma_flags() bitmap flag macro helper
...
