Add dt-bindings for 10.1" TFT LCD module from Ampire Co. Ltd.
as part of panel-simple.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260515082232.1766586-1-dario.binacchi@amarulasolutions.com
The driver unconditionally sets the transmission mode to HDMI, which
leads to display output not working with DVI monitors. Check the
connector's display information sink type to identify the correct mode
to configure the bridge.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260523-it66121-fix-dvi-mode-v5-v5-3-33b4468162f9@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Move the existing .mode_set logic to the .atomic_enable callback. The
former is deprecated and drivers are supposed to use the latter instead.
Also, drop the struct it66121_ctx.connector field because the connector
can be accessed through the atomic state and there is no need to store
it anymore.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260523-it66121-fix-dvi-mode-v5-v5-2-33b4468162f9@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Instead of open coding the HDMI AVI Infoframes buffer management, use the
helpers provided by the HDMI connector framework.
Also, add callbacks to implement HDMI Vendor Specific Infoframe and Audio
InfoFrame support. The driver was not sending these before, but they are
required when using the HDMI helpers.
These were implemented following the IT66121 Programming Guide.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260523-it66121-fix-dvi-mode-v5-v5-1-33b4468162f9@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The cursor plane patch was stalled for a too long time that the
struct drm_atomic_state parameter of atomic modeset hooks has been
changed to struct drm_atomic_commit.
Fix this by replacing the parameter's type. All helpers that retrieve
information from this struct are also changed so simply replacing the
type works.
Fixes: 8c4ae21891 ("drm: verisilicon: add support for cursor planes")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260525153618.1336239-1-zhengxingda@iscas.ac.cn
Drivers were accessing this drm_exec member directly.
While that may seem harmless, it will require action if
the drm_exec utility is made a subclass of a dma-resv transaction
utility as outlined in the cover-letter.
Provide an accessor, drm_exec_ticket() to avoid that.
v2:
- Fix amdgpu compile error (Intel CI)
- Update the commit message.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-5-thomas.hellstrom@linux.intel.com
The xe driver was using the drm_exec retry pointer directly to
restart the locking loop after out-of-memory errors. This is
relying on undocumented behaviour.
Instead add a drm_exec_retry() macro that can be used in this
situation, and that also warns if the struct drm_exec is
not newly (re-)initialized.
Use that macro in xe.
v2:
- Only allow if the drm_exec context is newly initialized.
(Christian)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-4-thomas.hellstrom@linux.intel.com
Use __UNIQUE_ID as done elsewhere in the kernel rather than a
hand-rolled __PASTE to craft a unique id.
Also use __maybe_unused rather than (void) to signify that a
variable, althrough written to, may not actually be used.
v2:
- Move assignment to declaration (Christian)
- Declare the retry pointer as void *const.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-3-thomas.hellstrom@linux.intel.com
Nobody makes any use of it. Possible internal future users can
instead use the _index variable. External users shouldn't use
it since the array it's pointing into is internal drm_exec state.
v2:
- Use a unique id for the loop variable (Christian)
Assisted-by: GitHub Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-2-thomas.hellstrom@linux.intel.com
Firmware expects IPC messages to always carry the full fixed
sizeof(struct vpu_jsm_msg) size. Sending the full struct also
ensures unused fields are zeroed, which maintains compatibility
when existing commands are extended with new fields in the future.
Replace the misleading TODO comment with an explanation of the
actual intent.
Reviewed-by: Dawid Osuchowski <dawid.osuchowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260522093209.1169716-1-karol.wachowski@linux.intel.com
Verisilicon display controllers support hardware cursors per output
port.
Add support for them as cursor planes.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506175610.2542888-3-zhengxingda@iscas.ac.cn
Different display controller variants support different maximum cursor
size. All known DC8200 variants support both 32x32 and 64x64, but some
DC8000 variants support either only 32x32 or up to 256x256.
The minimum size is fixed at 32 and only PoT square sizes are supported.
Add the max cursor size field to HWDB and fill all entries with 64.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260506175610.2542888-2-zhengxingda@iscas.ac.cn
The RZ/T2H (R9A09G077) SoC includes a DU with a DPI interface,
supporting resolutions up to WXGA with two RPFs for layer blending.
Unlike earlier RZ/G2L SoCs, RZ/T2H requires explicit assertion of a
DPI output-enable signal (DU_MCR0_DPI_EN) during CRTC startup.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260519160825.4082566-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Move pixel clock validation from a fixed encoder check to per SoC
constraints stored in rzg2l_du_device_info.
Pixel clock limits differ across SoCs in the RZ DU family and cannot be
expressed by a single shared rule. For example, RZ/G2UL and RZ/G2L limit
the DPAD0 pixel clock to a narrow window, while other SoCs such as
RZ/T2H require a wider operating range.
Add mode_clock_min and mode_clock_max fields to rzg2l_du_device_info to
describe the supported pixel clock range for each SoC. Update
rzg2l_du_encoder_mode_valid() to check these bounds when evaluating
DPAD0 outputs, returning MODE_CLOCK_LOW when the pixel clock falls
below mode_clock_min and MODE_CLOCK_HIGH when it exceeds mode_clock_max.
Populate the pixel clock limits for both the RZ/G2UL (R9A07G043U) and
RZ/G2L (R9A07G044) variants to a minimum of 20875 kHz and a maximum of
83500 kHz.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20260519160825.4082566-5-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Update the DU CRTC initialisation to request the reset control using
devm_reset_control_get_optional_shared(). On RZ/T2H SoCs the DU block does
not expose a reset line, and treating the reset as mandatory prevents the
driver from probing on those platforms.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260519160825.4082566-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Document the Display Unit (DU) support for the RZ/T2H and RZ/N2H SoCs.
The DU block on RZ/T2H is functionally equivalent to the RZ/G2UL DU and
supports the DPI interface, but includes SoC-specific register differences
and has no reset control. Add a dedicated compatible string to represent
this variant and update the allOf constraints accordingly.
As the DU implementation on RZ/N2H matches RZ/T2H, describe it using an
RZ/N2H specific compatible string with the RZ/T2H compatible as fallback.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260519160825.4082566-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
The RZ/G2UL DU supports only a single port@0 DPI. Explicitly refuse
port@1 in the ports node.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://patch.msgid.link/20260519160825.4082566-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
The system heap can be easily turned into a module by adding the usual
MODULE_* macros, importing the proper namespaces and changing the
Kconfig symbol to a tristate.
This heap won't be able to unload though, since we're missing a lot of
infrastructure to make it safe.
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260427-dma-buf-heaps-as-modules-v5-3-b6f5678feefc@kernel.org
All the symbols used by the CMA heap are already exported, so turning it
into a module is straightforward. We only need to add the usual MODULE_*
macros, import the proper namespaces and change the Kconfig symbol to a
tristate.
This heap won't be able to unload though, since we're missing a lot of
infrastructure to make it safe.
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260427-dma-buf-heaps-as-modules-v5-2-b6f5678feefc@kernel.org
The mem_accounting kernel parameter is used by heaps to know if they
should account allocations in their respective cgroup controllers.
Since we're going to allow heaps to compile as modules, we need to
export that variable.
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260427-dma-buf-heaps-as-modules-v5-1-b6f5678feefc@kernel.org
Convert the IT66121 HDMI bridge driver from manually registering an
hdmi-codec platform device to using the DRM HDMI Audio Helper framework
via DRM_BRIDGE_OP_HDMI_AUDIO instead.
The previous implementation manually allocated hdmi_codec_pdata,
registered the platform device, and implemented hdmi_codec_ops callbacks
including get_eld. The new approach sets DRM_BRIDGE_OP_HDMI_AUDIO on the
bridge, letting the framework handle the codec registration. This also
resolves some non-compliance issues with the current audio implementation,
such as HDMI audio advertising a non-functional capture stream to userspace.
The audio callbacks are converted from hdmi_codec_ops signatures to
drm_bridge_funcs hdmi_audio callbacks:
- it66121_audio_hw_params -> it66121_hdmi_audio_prepare
- it66121_audio_startup -> it66121_hdmi_audio_startup
- it66121_audio_shutdown -> it66121_hdmi_audio_shutdown
- it66121_audio_mute -> it66121_hdmi_audio_mute_stream
The it66121_audio_get_eld, it66121_audio_codec_ops, and
it66121_audio_codec_init functions are removed as the framework handles
these responsibilities.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sen Wang <sen@ti.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260318154636.3230454-1-sen@ti.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Replace the driver local defines with the shared constants defined in the
<linux/hdmi.h> header for the minimum and maximum TMDS character rates.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-9-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Replace the driver local defines with the shared constants defined in the
<linux/hdmi.h> header for the minimum and maximum TMDS character rates.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-8-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Replace the 165000000 magic number with the shared constant defined
in the <linux/hdmi.h> header.
The old comment referenced "HDMI <= 1.2" but 165 MHz is actually
the maximum TMDS character rate defined by the HDMI 1.0 spec.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Chen-Yu Tsai <wens@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-7-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Replace the 340000000 and 165000000 magic numbers with the shared
constants defined in the <linux/hdmi.h> header.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-6-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Replace the driver local INNO_HDMI_MIN_TMDS_CLOCK define with the shared
constant defined in the <linux/hdmi.h> header.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-5-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Replace the driver local HDMI14_MAX_TMDSCLK define with the shared
constant defined in the <linux/hdmi.h> header.
The local define incorrectly referenced HDMI 1.4, but the 340 MHz
maximum TMDS character rate was actually introduced in HDMI 1.3.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-4-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Replace the driver local HDMI14_MAX_TMDSCLK define with the shared
constant defined in the <linux/hdmi.h> header.
The local define incorrectly referenced HDMI 1.4, but the 340 MHz
maximum TMDS character rate was actually introduced in HDMI 1.3.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-3-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Several DRM drivers already define their own constants for minimum and
maximum TMDS character rates.
By defining common rate constants in a shared header, drivers can just use
them instead of having driver local define macros or use magic numbers.
The values defined in the <linux/hdmi.h> header correspond to maximum TMDS
character rates defined by each HDMI specification version:
- HDMI_TMDS_CHAR_RATE_MIN_HZ: 25 MHz (minimum for all versions)
- HDMI_1_0_TMDS_CHAR_RATE_MAX_HZ: 165 MHz (HDMI 1.0 maximum)
- HDMI_1_3_TMDS_CHAR_RATE_MAX_HZ: 340 MHz (HDMI 1.3 maximum)
- HDMI_2_0_TMDS_CHAR_RATE_MAX_HZ: 600 MHz (HDMI 2.0 maximum)
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260520144424.1633354-2-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The dw_hdmi-rockchip driver validates pixel clock rates against the
HDMI PHY's internal clock provider on certain SoCs like RK3328.
This is currently achieved by dereferencing hdmi->phy->dev.of_node
to obtain the provider node, which violates the Generic PHY API's
encapsulation (the goal is for struct phy to be an opaque pointer
with a hidden definition, to be interacted with only using API
functions or NULL pointer checks, for the case where optional variants
of phy_get() did not find a PHY).
Refactor dw_hdmi_rockchip_bind() to perform a manual phandle lookup
on the "hdmi" PHY index within the controller's DT node. This provides
a parallel path to the clock provider's OF node without relying on the
internal structure of the struct phy handle.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260505100523.1922388-16-vladimir.oltean@nxp.com
virtio_gpu_cursor_plane_update() and virtio_gpu_resource_flush() lock
the framebuffer BO's dma_resv via virtio_gpu_array_lock_resv() and
ignore its return value. The function can fail with -EINTR from
dma_resv_lock_interruptible() (signal during lock wait) or with
-ENOMEM from dma_resv_reserve_fences() (fence slot allocation),
leaving the resv lock not held. The queue path then walks the object
array and calls dma_resv_add_fence(), which requires the lock held;
with lockdep enabled this trips dma_resv_assert_held():
WARNING: drivers/dma-buf/dma-resv.c:296 at dma_resv_add_fence+0x71e/0x840
Call Trace:
virtio_gpu_array_add_fence
virtio_gpu_queue_ctrl_sgs
virtio_gpu_queue_fenced_ctrl_buffer
virtio_gpu_cursor_plane_update
drm_atomic_helper_commit_planes
drm_atomic_helper_commit_tail
commit_tail
drm_atomic_helper_commit
drm_atomic_commit
drm_atomic_helper_update_plane
__setplane_atomic
drm_mode_cursor_universal
drm_mode_cursor_common
drm_mode_cursor_ioctl
drm_ioctl
__x64_sys_ioctl
Beyond the WARN, mutating the dma_resv fence list without the lock
races with concurrent readers/writers and can corrupt the list.
Both call sites run inside the .atomic_update plane callback, which
DRM atomic helpers do not allow to fail (by the time it runs, the
commit has been signed off to userspace and there is no clean
rollback path). Moving the lock acquisition to .prepare_fb was
rejected because the broader lock scope deadlocks against other BO
locking paths in the same atomic commit.
Introduce virtio_gpu_lock_one_resv_uninterruptible() that uses
dma_resv_lock() instead of dma_resv_lock_interruptible(). This
eliminates the -EINTR failure mode -- the realistic syzbot trigger
-- without extending the lock hold across the commit. The helper
locks a single BO and rejects nents > 1 with -EINVAL; both fix
sites lock exactly one BO.
Use it from virtio_gpu_cursor_plane_update() and
virtio_gpu_resource_flush(); check the return value to handle the
remaining -ENOMEM case from dma_resv_reserve_fences() by freeing
the objs and skipping the plane update for that frame. The
framebuffer BOs touched here are not shared with other contexts
and lock contention is expected to be brief, so the loss of
signal-interruptibility is acceptable.
Other callers of virtio_gpu_array_lock_resv() (the ioctl paths)
continue to use the interruptible variant.
The bug was reported by syzbot, triggered via fault injection
(fail_nth) on the DRM_IOCTL_MODE_CURSOR path, which forces the
-ENOMEM branch in dma_resv_reserve_fences().
Reported-by: syzbot+72bd3dd3a5d5f39a0271@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=72bd3dd3a5d5f39a0271
Fixes: 5cfd31c5b3 ("drm/virtio: fix virtio_gpu_cursor_plane_update().")
Cc: stable@vger.kernel.org
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260519082247.34470-1-kartikey406@gmail.com
Add VIRTGPU_PARAM_BLOB_ALIGNMENT as a param that can be read with
VIRTGPU_GETPARAM by userspace applications running in the guest to
obtain the host's page size and find out the right alignment to be used
in shared memory allocations.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-4-slp@redhat.com
If VIRTIO_GPU_F_BLOB_ALIGNMENT has been negotiated, blob size must be
aligned to blob_alignment. Validate this in verify_blob() so that
invalid requests are rejected early.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-3-slp@redhat.com
Support VIRTIO_GPU_F_BLOB_ALIGNMENT, a feature that indicates the device
provides a valid blob_alignment field in its configuration, and that
both RESOURCE_CREATE_BLOB and RESOURCE_MAP_BLOB requests must be aligned
to that value.
Signed-off-by: Sergio Lopez <slp@redhat.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patch.msgid.link/20260428194450.518296-2-slp@redhat.com
Add support for workload submission trace points.
Co-developed-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Donald Robson <donald.robson@imgtec.com>
Signed-off-by: Alexandru Dadu <alexandru.dadu@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260513-b4-pvr-trace-points-v1-1-81222d1a4c99@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Update FW initialised state shared resource access with READ/WRITE_ONCE
to prevent following:
- Non-atomic access to variable in multi-thread/CPU case.
- Merge successive loads from the same variable.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260519-b4-context_reset-v2-4-931018a7131d@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Rename the variable from 'booted' to 'initialised' to align with the
driver's expectations and state, indicating that FW boot initialisation
is complete and the firmware is fully initialised.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260519-b4-context_reset-v2-3-931018a7131d@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Verify the job’s fence in the timeout handler; if the firmware has since
signaled completion, then report NO HANG.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260519-b4-context_reset-v2-2-931018a7131d@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Initialise the context ID for the FW common context correctly by moving
the context allocation earlier.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260519-b4-context_reset-v2-1-931018a7131d@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Up to now drm_of_find_panel_or_bridge() can be called with a bridge pointer
only, a panel pointer only, or both a bridge and a panel pointers. The
logic to handle all the three cases is somewhat complex to read however.
Now all bridge-only callers have been converted to
of_drm_get_bridge_by_endpoint(), which is simpler and handles bridge
refcounting. So forbid new bridge-only users by mandating a non-NULL panel
pointer in the docs and in the sanity checks along with a warning.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-11-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-10-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-9-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-8-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-7-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-6-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
