Add KUnit tests for six pure-logic functions in
amdgpu_dm_color.c: amdgpu_dm_fixpt_from_s3132,
__is_lut_linear, __drm_ctm_to_dc_matrix,
__drm_ctm_3x4_to_dc_matrix, amdgpu_tf_to_dc_tf,
and amdgpu_colorop_tf_to_dc_tf.
Expose these static functions under CONFIG_DRM_AMD_DC_KUNIT_TEST
and add a new amdgpu_dm_color.h header with the KUnit-only
prototypes. The test file re-declares the dc and amdgpu
transfer function enums locally to avoid pulling in the full
DC/amdgpu include chain that fails under UML.
26 test cases cover signed-magnitude to two's complement
conversion, LUT linearity detection, CTM-to-DC matrix
conversion, and transfer function enum mapping.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit tests that verify the three supported transfer
function bitmask constants exported by amdgpu_dm_colorop.c:
amdgpu_dm_supported_degam_tfs, amdgpu_dm_supported_shaper_tfs,
and amdgpu_dm_supported_blnd_tfs.
Each bitmask is tested for presence of each expected curve
flag and absence of any unexpected bits. A cross-check
confirms that degam and blnd bitmasks are identical.
amdgpu_dm_initialize_default_pipeline() is not tested
because it needs a fully initialised drm_plane backed by
an amdgpu_device with DC color caps.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Expose process_output() as non-static when CONFIG_DRM_AMD_DC_KUNIT_TEST
is enabled and add KUnit tests exercising its full branch logic:
- property_validate_dwork is always enqueued (delay=0)
- callback_dwork is scheduled when callback_needed is set
- callback_dwork is cancelled when callback_stop is set
- watchdog_timer_dwork is scheduled when watchdog_timer_needed is set
- watchdog_timer_dwork is cancelled when watchdog_timer_stop is set
- Both dworks are scheduled independently when both flags are set
Assisted-by: Copilot:Claude-Sonnet-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DM CRC parsing functions are an easy candidate for exploring the use of
KUnit unit-testing frameworks. Add a few tests for the same.
The test file and .kunitconfig are placed under amdgpu_dm/tests/ to
follow the convention of keeping test code separate from production
sources.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of coming up with more sophisticated names for states a VM BO
can be in, group them by the type of BO first and then by the state.
So we end with BO type kernel, always_valid and individual and then states
evicted, moved and idle.
Not much functional change, except that evicted_user is moved back
together with the other BOs again which makes the handling in
amdgpu_vm_validate() a bit more complex.
Also fixes a problem with user queues and amdgpu_vm_ready(). We didn't
considered the VM ready when user BOs were not ideally placed, harmless
performance impact for kernel queues but a complete show stopper for
userqueues.
v2: fix a few typos in comments, rename the BO types to make them more
descriptive, fix a couple of bugs found during testing
v3: squashed together with revert to old status lock handling, looks
like the first patch still had some bug which this one here should fix.
Fix a missing lock around debugfs printing.
v4: fix merge clash pointed out by Prike
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
return error when converting records to nps pages fails
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
check the upper and lower limits of first record offset
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check and drop invalid bad page records.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When generating ras cper file, the original data nodes in the ras
log ring buffer may be deleted, leading to invalid pointer
access. Copy the data from the ras log ring instead of directly
referencing the pointers to avoid this issue.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Change psp_copy_fw from void to int: return -ENODEV when drm_dev_enter
fails, and -EINVAL when the image size is zero or larger than the
1 MiB PSP private buffer.
Replace open-coded memset/memcpy into fw_pri_buf with psp_copy_fw.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Well mostly the same issues the other code had as well:
1. Memory allocation while holding the userq_mutex lock is forbidden!
2. Things were created/started/published in the wrong order.
3. The reset lock was taken in the wrong order and seems to be
unecessary in the first place.
4. Error messages on invalid input parameters can spam the logs.
5. Error messages on memory allocation failures are usually superflous
as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use mutex to prevent concurrent access conflicts.
Signed-off-by: YiPeng Chai <YiPeng.Chai@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
check the upper and lower limits of first record offset
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reject undersized tables and cap the derived entry count
to AMDGPU_MAX_I2C_BUS so we do not overrun adev->i2c_bus[]
or walk an absurd number of entries on corrupt size fields.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cap nesting at 32 levels with execute_depth and
return -ELOOP when exceeded.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bound CPER record fetch allocation by buffer size.
v2: Drop redundant cap on cper_num and raise
GET_CPER_RECORD max buffer size.
Suggested-by: YiPeng Chai <YiPeng.Chai@amd.com>
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add more IP versions for uniras
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, the i2s_pdata structure is dynamically allocated in
acp_hw_init() but never freed in both the error handling path and
the acp_hw_fini() cleanup path, causing a permanent memory leak.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
'evergreen_surface_check' is called with a NULL warning prefix when
handling potentially recoverable issues or just to compute the alignment
requirements, and 'evergreen_surface_check' is called again in case of
failure (with the correct prefix, as opposed to NULL), therefore, the
initial check must not print a warning, because the surface may be
accepted successfully after having been corrected, however if it isn't,
the final check will print the warning anyway. The surface check
functions specific to array modes already implement this behavior, but
the 'evergreen_surface_check' function itself doesn't.
This is also supposed to fix the "'%s' directive argument is null
[-Werror=format-overflow=]" compiler warning.
Fixes: 285484e2d5 ("drm/radeon: add support for evergreen/ni tiling informations v11")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Vitaliy Triang3l Kuzmin <ml@triang3l.ru>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The SMU EEPROM read paths pass byte-sized record field addresses
to mca_ipid_parse(), whose outputs are u32 pointers.
Writing through those widened pointers can clobber adjacent fields
and bytes beyond the record storage.
Parse the IPID values into local u32 temporaries instead, then
explicitly narrow the values when storing them in the EEPROM record.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When CPER ring overflow handling advances the read pointer, it trusts the
parsed entry size from the current ring contents. Corrupt CPER data can
produce an entry size that does not advance rptr after dword conversion
and pointer masking.
In that case the recovery loop keeps testing the same location while
holding the CPER ring mutex. This can hang the worker that is writing the
next CPER record.
Detect a no-progress rptr update and reset the CPER ring to an empty
state instead. This drops the corrupt contents and lets the writer leave
the recovery path without spinning.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Multiple queues needs these bo_va objects belonging to
the same uq_mgr. So once they are mapped lets not unmap
them as at any point of time any of the queues might be
using it.
Also userq_va_mapped should be a boolean than atomic.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The original addition operation in 64-bit unsigned type may encounter
overflow situations. To prevent such issues and safely reject invalid
inputs, the check_add_overflow() function is used.
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_umc_handle_bad_pages() allocates err_data->err_addr before
querying UMC error information. In the direct and firmware query paths,
the pointer is reassigned to a fresh allocation before the original
buffer is released, so the initial allocation is leaked on each handled
event.
Free the existing buffer before replacing it in those query paths so the
function exit cleanup only owns the active allocation.
Signed-off-by: Xiang Liu <xiang.liu@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During Mode 1 reset, the ASIC undergoes a reset cycle and becomes temporarily
inaccessible via PCIe. Any attempt to access framebuffer or MMIO registers during
this window can result in uncompleted PCIe transactions, leading to NMI panics or
system hangs.
To prevent this, Unmap all of the applications mappings of the framebuffer
and doorbell BARs before mode1 reset. Also prevent new mappings from coming in
during the reset process.
v2: remove inode in kfd_dev (Christian)
v3: correct unmap offset (Felix), remove prevent new mappings part
to avoid deadlock (Christian)
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- Add amdgpu_dm KUnit test for:
* CRC function
* HDCP process_output
* colorop TF bitmasks
* color helpers
* PSR and Replay functions
* ISM functions
- Fix eDP receiver ready status check in T7 sequence
- Enable dcn42 pstate pmo
- Refactor PSR. Replay and ABM functionality into dedicated power modules
- Fix assertion due to disable/enable CM blocks
- Enable additional wait for pipe pending checks
- Fix ISM dc_lock deadlock during suspend
- Use lockdep_assert_held() for dc_lock check
- Fix clear PSR config flow
- Exclude the MST overhead from BW deallocation
- Allow power up even w/ powergating disabled on DCN42
- Fix integer overflow in bios_get_image()
- Validate GPIO pin LUT table size before iterating
- Add Auxless-ALPM support in VESA Panel Replay
- Add debug option for replay ESD recovery.
- Validate payload length and link_index in dc_process_dmub_aux_transfer_async.
- Add ADDR3 swizzle modes.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
New swizzle modes are needed for ADDR3 block support.
[How]
Add DC_ADDR3_SW_64KB_2D_Z and DC_ADDR3_SW_256KB_2D_Z enum
values to dc_hw_types.h.
Reviewed-by: Ilya Bakoulin <ilya.bakoulin@amd.com>
Signed-off-by: Wenxian Wang <wenxian.wang@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
dc_process_dmub_aux_transfer_async() copies payload->length bytes into a
16-byte stack buffer (dpaux.data[16]) guarded only by an ASSERT(), which
is a no-op in release builds. If a caller ever passes length > 16 this
results in a stack buffer overflow via memcpy.
Additionally, link_index is used to dereference dc->links[] without
bounds checking against dc->link_count, risking an out-of-bounds access.
Replace the ASSERT with a hard runtime check that returns false when
payload->length exceeds the destination buffer size, and add a bounds
check for link_index before it is used.
Assisted-by: GitHub Copilot:Claude claude-4-opus
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
Add a new debug option "enable_replay_esd_recovery" to control whether
to enable the replay ESD recovery feature.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wei-Guang Li <wei-guang.li@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[How]
Add Auxless-ALPM data in VESA PR initialization
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Leon Huang <Leon.Huang1@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
The GPIO pin table parsers in get_gpio_i2c_info() and
bios_parser_get_gpio_pin_info() derive an element count from the VBIOS
table_header.structuresize field, then iterate over gpio_pin[] entries.
However, GET_IMAGE() only validates that the table header itself fits
within the BIOS image. If the VBIOS reports a structuresize larger than
the actual mapped data, the loop reads past the end of the BIOS image,
causing an out-of-bounds read.
Fix this by calling bios_get_image() to validate that the full claimed
structuresize is accessible within the BIOS image before entering the
loop in both functions.
Assisted-by: GitHub Copilot:claude-opus-4-6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why&How]
The bounds check in bios_get_image() computes 'offset + size' using
unsigned 32-bit arithmetic before comparing against bios_size. If a
VBIOS image contains a near-UINT32_MAX offset the addition wraps to a
small value, the comparison passes, and the function returns a wild
pointer past the VBIOS mapping.
Additionally, the comparison uses '<' (strict), which incorrectly
rejects the valid exact-fit case where offset + size == bios_size.
Fix both issues by restructuring the check to avoid the addition
entirely: first reject if offset alone exceeds bios_size, then check
size against the remaining space (bios_size - offset). This eliminates
the overflow and correctly permits exact-fit accesses.
Assisted-by: GitHub Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Extract all Replay related functions from power.c and
power_helpers.c into a new power_replay.c module for
better code organization and maintainability.
[How]
Create new power_replay.c file containing
Replay-related functions moved from power.c
and power_helpers.c . Update mod_power.h with
function declarations. Maintain forward
declaration for type compatibility.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Do not exit early dcn42 pg control functions on power up for pipe PG
failsafe.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The MST overhead was incorrectly included
in the requested BW during BW deallocation.
[How]
Exclude the MST overhead from BW deallocation.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
mutex_is_locked() only tells whether *some* task holds the mutex, not
the current one, so the existing ASSERT can silently pass when the
caller violates the contract.
[How]
Use the kernel's lockdep debugging utility (include/linux/lockdep.h)
and replace ASSERT(mutex_is_locked(&dm->dc_lock)) with
lockdep_assert_held(&dm->dc_lock), which checks the current task's
held-lock stack.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
System hang observed during suspend/resume while video is playing.
amdgpu_dm_ism_disable() is called under dc_lock and waits for ISM
delayed work via disable_delayed_work_sync(). The work handlers
themselves take dc_lock, producing an ABBA deadlock when a worker is
in flight at suspend time.
[How]
Split the disable path into two phases with opposite locking
contracts:
1. amdgpu_dm_ism_disable() -- quiesces workers, must NOT hold
dc_lock.
2. amdgpu_dm_ism_force_full_power() (new) -- drives the ISM FSM
back to FULL_POWER_RUNNING, must hold dc_lock.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In cases where there are two FULL updates within the same display frame,
it's possible for some blocks to be programmed a second time without having
been latched completely from the first programming.
DCN 3.5 and up already work around this with additional validation checks
for frame count and defer as needed via fsleep.
[how]
Enabled existing pipe checks generically for all DCN versions to avoid HW
programming hazards.
Also removed redundant max_frame_count which can be determined by the
register mask and shift.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Some dc state transitions can result in CM blocks being disabled, then
re-enabled. The disable will set a defer bit, but re-enable will not
clear it. When optimizing later, an assert will be hit due to incorrect
expected HW state.
[how]
Clear defer bits if the block is re-enabled before optimization is
executed.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Extract all PSR (Panel Self Refresh) related functions from power.c
into a new power_psr.c module for better code organization and
maintainability.
[How]
Create new power_psr.c file containing all PSR-related functions
moved from power.c. Remove static qualifier from shared functions
to enable cross-file access:
- psr_context_to_mod_power_psr_context: Convert PSR context to
module power PSR context
- map_index_from_stream: Map stream to power entity index
- delay_two_frames: Wait for two frame periods
Add function declarations to header. Maintain forward declaration of struct
core_power for type compatibility.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Lohita Mudimela <lohita.mudimela@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some eDP panels return sinkstatus as 0x5, causing the original sinkstatus == 1
check to never match and resulting in unnecessary polling delay. The
equality check is too restrictive and doesn't properly validate the
specific status bit that indicates receiver readiness.
[How]
Replace direct value comparison with proper bitmask check using
DP_RECEIVE_PORT_0_STATUS constant.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Sung-huai Wang <Danny.Wang@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This reverts commit f71d0b68ec.
1. Auto-generated Header: The file 'dmub_cmd.h' is an auto-generated header
managed in an external repository (dmu_stg). Manual changes made directly in
this repository will be overwritten and lost during the next automated weekly
synchronization.
2. Tooling Compatibility: This header is governed by internal AMD firmware
standards which require Doxygen formatting for cross-team documentation.
Moving to kernel-doc syntax may break internal documentation pipelines.
3. Suppressing Warnings: Current 'make htmldocs' and 'make W=1' builds
do not actively scan 'dmub_cmd.h' for kernel-doc compliance, thus no warnings
are triggered during standard compilation. To address warnings generated when
manually running './scripts/kernel-doc', we have added a notice at the file
header indicating that this is an auto-generated file that does not strictly
follow kernel-doc formatting. This ensures that any future linting tools or
manual checks recognize the formatting as intentional.
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Some DCN4.2 related code is missing from upstream
Fixes: e56e3cff2a ("drm/amd/display: Sync dcn42 with DC 3.2.373")
Acked-by: ChiaHsuan Chung <ChiaHsuan.Chung@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
amdgpu_pmops_runtime_suspend() runs almost the same code that
amdgpu_pmops_runtime_idle() runs. That is there is pointless code
duplication.
[How]
Move amdgpu_pmops_runtime_idle() up, extract common code and then
call from both functions. No intended functional changes.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
allocate_sdma_queue has an option where the sdma queue id can be
specified (used by CRIU). We weren't bounds-checking that
value.
Confirm it's less than the maximum number of queues.
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In amdgpu_seq64_alloc there is a possibility that two difference cores
from two separate NODES can try to and could get the same free slot.
So this fixes that race here using atomic test_and_set clear operations.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
