Calculate sdma instance number according to xcc_mask and
num_inst_per_xcc, and correct adev->sdma.sdma_mask according
to totally sdma instance number.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UMC node_inst_num can exceed 32, causing
(1 << node_inst_num) to shift a 32-bit int
out of bounds
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For MP0 15.0.8, IMU ucode is part of IFWI and ASP would load it by default.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update GFX CGCG flags and fix num_xcc assignment
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return false from soc_v1_0_reset_on_init as psp is loaded with ifwi and
sol register will be non zero on first load itself
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IH v7_1 changes the offsets of some registers relative to
IH v7_0. Introduce IH v7_1-specific register access
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If DF function not initialized, NULL pointer issue
will happen on soc24.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On some hardware configuration, sriov guests
cannot access mm_index and mm_data. Update the
IPD table via memcpy in these cases
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implement a driver path to read the IP discovery
binary offset and size from DRIVER_SCRATCH registers
BIOS signals usage by setting a feature flag that
instructs the driver to use this method. Otherwise,
fallback to legacy approach.
v2: Simplify discovery offset/size retrieval in
get_tmr_info
v3: Update get_tmr_info to cover discovery offset
and size retrieval for both bare-metal and sriov
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use an common function to check the validation of discovery table.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Support for new IP discovery binary header version 2.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Error handling path should unreserve bo then return failed.
Fixes: 305cd109b7 ("drm/amdkfd: Validate user queue update")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Alex Sierra <alex.sierra@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along the following updates:
- [FW Promotion] Release 0.1.50.0
- Sync DCN42 with DC 3.2.373
- Add DML support for dcn42
- Enable dcn42 DC clk_mgr
- Clean up unused code
- Add back missing memory type in array
- Fix compile warnings in dml2_0
- Check for S0i3 to be done before DCCG init on DCN21
- Add documentation and cleanup DMUB HW lock manager
- Add new types to replay config
- Fix HWSS v3 fast path determination
- Add missing DCCG register entries for DCN20-DCN316
- Add ESD detection for replay recovery
- Update underflow detection
- Add COLOR_ENCODING/COLOR_RANGE to overlay planes
- Add NV12/P010 formats to primary plane
- Set chroma taps to 1 if luma taps are 1
- Add min clock init for DML21 mode programming
- Return early from vesa replay enable function
- Clean up NULL pointer warnings in dml2
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch provides a bulk merge to align driver
support for DCN42 with Display Core version 3.2.373.
It includes upgrade for:
- clk_mgr
- dml2/dml21
- optc
- hubp
- mpc
- optc
- hwseq
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DML support for DCN 4.2
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DCN 4.2 clock manager.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Silence warning by cleaning up unused code.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
Add back some missing memory type in window_memory_type.
It should be aligned with enum dmub_window_id.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
On DCN21, dccg2_init() is called in dcn10_init_hw() before
bios_golden_init(). During S0i3 resume, BIOS sets MICROSECOND_TIME_BASE_DIV
to 0x00120464 as a marker. dccg2_init() overwrites this to 0x00120264,
causing dcn21_s0i3_golden_init_wa() to misdetect the state and skip golden
init.
Eventually during the resume sequence, a flip timeout occurs.
[HOW]
Skip DCCG on dccg2_is_s0i3_golden_init_wa_done() on DCN21.
Fixes: 4c595e7511 ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To document how the helpers should be used before a subsequent change
adds new locations that these helpers will be used.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We're checking surface and stream updates after they've been applied to
their respective states within `update_planes_and_stream_state`.
Medium updates under the HWSS V3 fast path that are not supported or
tested are getting implicitly if they don't trigger a DML validation
and getting updated in place on the dc->current_state context.
[HOW]
Fix this issue by moving up the fast path determination check prior
to `update_planes_and_stream_state`. This is how the V2 path works
and how the V3 path used to work prior to the refactors in this area.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 4c595e7511 ("drm/amd/display: Migrate DCCG registers access
from hwseq to dccg component.") moved register writes from hwseq to
dccg2_*() functions but did not add the registers to the DCCG register
list macros. The struct fields default to 0, so REG_WRITE() targets
MMIO offset 0, causing a GPU hang on resume (seen on DCN21/DCN30
during IGT kms_cursor_crc@cursor-suspend).
Add
- MICROSECOND_TIME_BASE_DIV
- MILLISECOND_TIME_BASE_DIV
- DCCG_GATE_DISABLE_CNTL
- DCCG_GATE_DISABLE_CNTL2
- DC_MEM_GLOBAL_PWR_REQ_CNTL
to macros in dcn20_dccg.h, dcn301_dccg.h, dcn31_dccg.h, and dcn314_dccg.h.
Fixes: 4c595e7511 ("drm/amd/display: Migrate DCCG registers access from hwseq to dccg component.")
Reported-by: Rafael Passos <rafael@rcpassos.me>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[HOW]
Add Replay recovery flow so that when HPD occurs and ESD is detected,
Replay can restore the system back to normal.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Weiguang Li <wei-guang.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Add underflow detection for later ASICs.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Extend COLOR_ENCODING and COLOR_RANGE property creation to overlay
planes in addition to primary planes. This allows overlay planes to
use YUV formats with proper color space configuration when the
hardware supports NV12/P010 formats.
These properties control the YUV-to-RGB conversion matrix selection
(BT.601/BT.709/BT.2020) and range handling (limited/full range).
Assisted-by: Claude: claude-sonnet-4.5
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add NV12, NV21, and P010 YUV formats to the primary plane's supported
format list, enabling YUV content to be scanned out directly from the
primary plane.
Assisted-by: Claude: claude-sonnet-4.5
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When luma is unscaled we also want chroma to be pixel-perfect.
When luma taps are > 1 the result will be a blurred luma plane,
even when the image isn't scaled.
This makes IGT tests for CSC colorop pass.
Assisted-by: Claude: claude-sonnet-4.5
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
0 stream cases do not go through any DML validation which leaves DCN
clocks in unoptimized states.
If requesting DML validation or programming with 0 streams, program
DCN clocks to lowest DPM state.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
If the enable state is already as expect then just return.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit addresses multiple warnings by adding defensive
checks for NULL pointers before dereferencing them. The changes ensure
that pointers such as are validated, preventing potential undefined
behavior.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Gaghik Khachatrian <gaghik.khachatrian@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Debugfs files for amdgpu are better to be handled in the dedicated
amdgpu_debugfs.c/.h files.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up the amdgpu_userq_create function clean up in
failure condition using goto method. This avoid replication
of cleanup for every failure condition.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The userq create path publishes queues to global xarrays such as
userq_doorbell_xa and userq_xa before creation was fully complete.
Later on if create queue fails, teardown could free an already
visible queue, opening a UAF race with concurrent queue walkers.
Also calling amdgpu_userq_put in such cases complicates the cleanup.
Solution is to defer queue publication until create succeeds and no
partially initialized queue is exposed.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
get_checkpoint_info() in kfd_mqd_manager_v9.c finds 32-bit value
ctl_stack_size by multiplying two 32-bit values. This can overflow to a
lower value, which could result in copying outside the bounds of
a buffer in checkpoint_mqd() in the same file.
Put in a check for the overflow, and fail with -EINVAL if detected.
v2: use check_mul_overflow()
Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Below is the warning thrown by the clang compiler:
linux/drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:588:9: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
stats_dir_filename);
^~~~~~~~~~~~~~~~~~
linux/drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:588:9: note: treat the string as an argument to avoid this
stats_dir_filename);
^
"%s",
linux/drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:635:18: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
p->kobj, counters_dir_filename);
^~~~~~~~~~~~~~~~~~~~~
linux/drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:635:18: note: treat the string as an argument to avoid this
p->kobj, counters_dir_filename);
^
"%s",
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
CC: Philip Yang <philip.yang@amd.com>
CC: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
linux/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:2358:24: warning: format string is not a string literal (potentially insecure) [-Wformat-security]
sprintf(ring->name, amdgpu_sw_ring_name(i));
^~~~~~~~~~~~~~~~~~~~~~
linux/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c:2358:24: note: treat the string as an argument to avoid this
sprintf(ring->name, amdgpu_sw_ring_name(i));
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable aid/xcd/hbm temperature reporting for smu_v13_0_12 via gpu
metrics
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add aid, xcd & hbm temperatures to gpu metrics for smu_v13_0_12
v2: Use correct umc control per stack (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is the best way to describe the GPU to a tool loading
the devcoredump.
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Older versions of the MES firmware may cause abnormal GPU power consumption.
When performing inference tasks on the GPU (e.g., with Ollama using ROCm),
the GPU may show abnormal power consumption in idle state and incorrect GPU load information.
This issue has been fixed in firmware version 0x8b and newer.
Closes: https://github.com/ROCm/ROCm/issues/5706
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The following members of struct amdgpu_mode_info do not have valid
references in the related kernel-doc sections:
- plane_shaper_lut_property
- plane_shaper_lut_size_property,
- plane_lut3d_size_property
Correct all affected comment blocks.
Fixes: f545d82479 ("drm/amd/display: add plane shaper LUT and TF driver-specific properties")
Fixes: 671994e3bf ("drm/amd/display: add plane 3D LUT driver-specific properties")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Now that we are using struct drm_edid, we can just call drm_edid_free
directly. Remove the function and update calls to drm_edid_free.
Signed-off-by: Joshua Peisach <jpeisach@ubuntu.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
