Lets move all the code dealing with struct drm_sched_rq into a separate
compilation unit. Advantage being sched_main.c is left with a clearer set
of responsibilities.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Matthew Brost <matthew.brost@intel.com> # v1
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-4-tvrtko.ursulin@igalia.com
Move the code dealing with entities entering and exiting run queues to
helpers to logically separate it from jobs entering and exiting entities.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-3-tvrtko.ursulin@igalia.com
Since we have removed the case where amdgpu was initializing entitites
with either no schedulers on the list, or with a single NULL scheduler,
and there appears no other drivers which rely on this, we can simplify the
scheduler by explicitly rejecting that early.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Philipp Stanner <phasta@kernel.org>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260417103744.76020-2-tvrtko.ursulin@igalia.com
nouveau_abi16_chan_fini() does invoke drm_sched_entity_fini() twice:
Once directly, and a second time through nouveau_sched_destroy().
That's likely undesired behavior and might be a bug since
drm_sched_entity_fini() decrements reference counts.
Fix the issue by using the appropriate function,
drm_sched_entity_kill(), to kill all remaining jobs within the entity.
Cc: stable@kernel.vger.org
Fixes: 9a0c32d698 ("drm/nouveau: don't fini scheduler if not initialized")
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260415144956.272506-3-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Some drivers do not care on teardown whether the last jobs pending in an
entity are actually executed before teardown completed. For such
scenarios, drm_sched_entity_flush() is not the ideal function since it's
intended to wait for jobs to complete.
Make drm_sched_entity_kill() public for that use-case and update the
documentation.
Suggested-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260415144956.272506-2-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Static analysis issue:
In all other uses of the function drm_object_property_get_default_value,
the return value of the function is checked before the output is saved to
the relevant object parameter. Though likely unnecessary given the
execution path involved, keep the behavior consistent across uses and only
set colorop_state->curve_1d_type in __drm_colorop_state_reset if
drm_object_property_get_default_value succeeds.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Link: https://patch.msgid.link/20260202214709.8037-2-jonathan.cavitt@intel.com
Statis analysis issue:
drm_gpuvm_prepare_range issues an exec_object_prepare call to all
drm_gem_objects mapped between addr and addr + range. However, it is
possible (albeit very unlikely) that the objects found through
drm_gpuvm_for_each_va_range (as connected to va->gem) are NULL, as seen
in other functions such as drm_gpuva_link and drm_gpuva_unlink_defer.
Do not prepare NULL objects.
Fixes: 50c1a36f59 ("drm/gpuvm: track/lock/validate external/evicted objects")
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://patch.msgid.link/20260130191953.61718-2-jonathan.cavitt@intel.com
In amdxdna_iommu_alloc(), if iommu_map() fails after successfully
allocating both iova and cpu_addr, the code jumps to free_iova
which only frees the iova, leaking the allocated pages.
Fixes: ece3e89809 ("accel/amdxdna: Allow forcing IOVA-based DMA via module parameter")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260416-amdxdna-v1-1-30c13008365c@gmail.com
Add support for configuring the hardware scheduler time quantum to
improve fairness across concurrent contexts.
The scheduler enforces a fixed time slice per context, preventing
long-running workloads from monopolizing the device and allowing
other contexts to make forward progress.
The default time quantum is 30ms and can be configured via the
time_quantum_ms module parameter.
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260415171139.904947-1-lizhi.hou@amd.com
Modernize the open coded test framework by using kunit.
Add a num_online_cpus() check to test_race_signal_callback() as the
default kunit.py runs the VM with a single CPU and this test depends on
two truly parallel kthreads. Skip it instead of hanging.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/2-v1-0a349a394eff+14110-dmabuf_kunit_jgg@nvidia.com
Modernize the open coded test framework by using kunit.
The kunit tool can be used to build a kernel and run it in a VM with:
$ tools/testing/kunit/kunit.py run --build_dir build_kunit_x86_64 --arch x86_64 --kunitconfig ./drivers/dma-buf/.kunitconfig
Along with the other ways to run kunits.
To make the kunit tool work like this the DMABUF_KUNIT_TEST kconfig must
select DMA_SHARED_BUFFER to get it turned on without building a driver
using it.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/1-v1-0a349a394eff+14110-dmabuf_kunit_jgg@nvidia.com
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
We need to handle the two cases: when a panel_bridge is added and when it
isn't. So:
* in the 'else' case a panel_bridge is not added and bridge is found: use
of_drm_find_and_get_bridge() to get a reference to the found bridge
* in the 'then' case a panel_bridge is found using a devm function which
already takes a refcount and will put it on removal, but we need to take
another so the following code in this function always get exactly one
reference that it needs to put
In order to put the reference, add the needed drm_bridge_put() calls in the
existing cleanup function.
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260409-drm-bridge-alloc-getput-drm_of_find_bridge-4-v5-2-d7381c07788a@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done.
This is made somewhat simpler by the fact that 'bridge' is a local
variable.
However we need to handle both branches of the main if().
In the 'else' case, just switch to of_drm_find_and_get_bridge() to ensure
the bridge is not freed while in use in the function tail
(drm_bridge_attach() mainly).
In the 'then' case, devm_drm_panel_bridge_add_typed() already increments
the refcount using devres which ties the bridge allocation lifetime to the
device lifetime, so we would not need to do anything. However to have the
same behaviour in both branches take an additional reference here, so that
the bridge needs to be put whichever branch is taken without more
complicated logic.
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260409-drm-bridge-alloc-getput-drm_of_find_bridge-4-v5-1-d7381c07788a@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Take the encoder chain mutex while iterating over the encoder chain in
drm_atomic_bridge_chain_pre_enable() and
drm_atomic_bridge_chain_post_disable() to ensure the lists won't change
while being inspected.
These functions have nested list_for_each_*() loops, which makes them
complicated. list_for_each_entry_from() loops could be replaced by
drm_for_each_bridge_in_chain_from(), but it would not work in a nested way
in its current implementation. Besides, there is no "_reverse" variant of
drm_for_each_bridge_in_chain_from().
Keep code simple and readable by explicitly locking around the outer
loop. Thankfully there are no break or return points inside the loops, so
the change is trivial and readable.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-encoder-chain-mutex-v5-7-8bf786c5c7e6@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
These loops in drm_bridge.c iterate over the encoder chain using
list_for_each_entry_reverse(), which does not prevent changes to the bridge
chain while iterating over it.
Take the encoder chain mutex while iterating to avoid chain changes while
iterating.
All the "simple" loops are converted. drm_atomic_bridge_chain_pre_enable()
and drm_atomic_bridge_chain_post_disable() are handled by a separate
commit.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-encoder-chain-mutex-v5-6-8bf786c5c7e6@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
These loops in drm_bridge.c iterate over the encoder chain using
list_for_each_entry_from(), which does not prevent changes to the bridge
chain while iterating over it.
Convert most of those loops to instead use
drm_for_each_bridge_in_chain_from(), which locks the chain.
This also simplifies code.
All the "simple" loops are converted here. The only ones not touched are
those in drm_atomic_bridge_chain_pre_enable() and
drm_atomic_bridge_chain_post_disable(), because they have nested loops
which are not well handled by drm_for_each_bridge_in_chain_from(). Those
two functions are handled by a separate commit.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-encoder-chain-mutex-v5-5-8bf786c5c7e6@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
drm_for_each_bridge_in_chain_scoped() and
drm_for_each_bridge_in_chain_from() currently get/put the bridge at each
iteration. But they don't protect the encoder chain, so it could change
(bridges added/removed) while some code is iterating over the list
itself. Such code can then derail on incorrect pointers.
To make iterations safe, augment these for_each macros to lock the encoder
chain mutex at the beginning and unlock it at the end of the loop (be it at
the end of the list, or earlier due to a 'break' or 'return' statement).
This change requires more operations when starting and ending the loop. To
avoid making the macros even more complex, move these operations to helper
functions. Also remname some of the existing helper functions for
consistency.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-encoder-chain-mutex-v5-4-8bf786c5c7e6@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
drm_bridge_attach() modifies the encoder bridge chain, so take a mutex
around such operations to allow users of the chain to protect themselves
from chain modifications while iterating.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-encoder-chain-mutex-v5-3-8bf786c5c7e6@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
drm_encoder_cleanup() modifies the encoder chain by removing bridges via
drm_bridge_detach(). Protect this whole operation by taking the mutex, so
that:
* any users iterating over the chain will not access it during the change
* other code willing to modify the list (drm_bridge_attach()) will wait
until drm_encoder_cleanup() is done
Note that the _safe macro in use here is providing a different and
orthogonal kind of protection than the mutex:
1. list_for_each_entry_safe() allows removing the current entry from the
list it is iterating on, synchronously; the non-safe version would be
unable to find the next entry after the current entry has been removed
2. the mutex being added allows to ensure that the list is not used
asynchronously by other code while it is being modified; this prevents
such other concurrent code to derail because it is iterating over an
element while it is removed
The _safe macro, which works by taking the "next" pointer in addition to
the "current" one, does not even try to provide the protection at item 2
above. This is visible e.g. when the "next" element is removed by other
concurrent code. This is what would happen without the added mutex:
1. start loop: list_for_each_entry_safe(pos, n, ...) sets:
pos = list_first_entry() = (bridge 1)
n = list_next_entry(pos) = (bridge 2)
2. enter the loop 1st time, do something with *pos (bridge 1)
3. in the meanwhile bridge 2 is hot-unplugged
-> another thread removes bridge 2
-> drm_bridge_detach()
-> list_del() sets (bridge 2)->next = LIST_POISON1
4. loop iteration 1 finishes, list_for_each_entry_safe() sets:
pos = n (previously set to bridge 2)
n = (bridge 2)->next = LIST_POISON1
5. enter the loop 2nd time, do something with *pos (bridge 2)
6. loop iteration 2 finishes, list_for_each_entry_safe() sets:
pos = n = LIST_POISON1 ==> bug!
However, simply adding mutex_[un]lock(&encoder->bridge_chain_mutex)
before/after the list_for_each_entry_safe() seems a simple and good
solution, but it is introducing a possible ABBA deadlock (found by
PROVE_LOCKING). The two code paths involved are:
* drm_encoder_cleanup():
- takes the bridge_chain_mutex (A)
- calls drm_bridge_detach -> drm_atomic_private_obj_fini ->
DRM_MODESET_LOCK_ALL_BEGIN() which takes all locks in the
acquisition context (B)
* drm_mode_getconnector() (and other code paths):
- calls drm_helper_probe_single_connector_modes() which:
- takes a drm_modeset_lock in the acquisition context (B)
- calls __drm_helper_update_and_validate ->
drm_bridge_chain_mode_valid -> drm_for_each_bridge_in_chain_from()
which takes the bridge_chain_mutex (A)
To avoid this potential ABBA deadlock, move all list items to a temporary
list while holding the bridge_chain_mutex, then detach all elements from
the temporary list without the mutex.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-encoder-chain-mutex-v5-2-8bf786c5c7e6@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The per-encoder bridge chain is currently assumed to be static once it is
fully initialized. Work is in progress to add hot-pluggable bridges,
breaking that assumption.
With bridge removal, the encoder chain can change without notice, removing
tail bridges. This can be problematic while iterating over the chain.
Add a mutex to be taken whenever looping or changing the encoder chain.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260324-drm-bridge-alloc-encoder-chain-mutex-v5-1-8bf786c5c7e6@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The RZ/G2L hardware manual (Rev. 1.50, May 2025), Section 34.4.2.1,
requires deasserting the CMN_RSTB signal after setting the Link registers.
Move the reset_control_deassert() call from rzg2l_mipi_dsi_dphy_init() to
rzg2l_mipi_dsi_startup(), placing it after the Link register writes. This
reset signal is optional for RZ/V2H SoCs, so add a NULL check. Drop the
unused ret variable from rzg2l_mipi_dsi_dphy_init().
The CMN_RSTB signal is not required for reading PHY registers in the
probe. Move reset_control_assert() from rzg2l_mipi_dsi_dphy_exit() to
rzg2l_mipi_dsi_stop(), placing it before the dphy_exit() call. Since this
reset signal is optional for RZ/V2H, the call is a no-op on that SoC.
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260330104450.128512-4-biju.das.jz@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
The RZ/G2L hardware manual (Rev. 1.50, May 2025), Section 34.4.2.1,
requires waiting at least 1 msec after deasserting the CMN_RSTB signal
before the DSI-Tx module is ready. Increase the delay from 1 usec to
1 msec by replacing udelay(1) with fsleep(1000) for RZ/G2L SoCs.
Fixes: 7a043f978e ("drm: rcar-du: Add RZ/G2L DSI driver")
Cc: stable@vger.kernel.org
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260330104450.128512-3-biju.das.jz@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
The RZ/G2L hardware manual (Rev. 1.50, May 2025), Section 34.4.2.1,
requires display timings to be set after the HS clock is started. Move
rzg2l_mipi_dsi_set_display_timing() from
rzg2l_mipi_dsi_atomic_pre_enable() to rzg2l_mipi_dsi_atomic_enable(),
placing it after rzg2l_mipi_dsi_start_hs_clock(). Drop the unused ret
variable from rzg2l_mipi_dsi_atomic_pre_enable().
Fixes: 5ce16c169a ("drm: renesas: rz-du: Add atomic_pre_enable")
Fixes: 7a043f978e ("drm: rcar-du: Add RZ/G2L DSI driver")
Cc: stable@vger.kernel.org
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Link: https://patch.msgid.link/20260330104450.128512-2-biju.das.jz@bp.renesas.com
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Adjust struct fatal_error_info to match the expected driver/firmware
interface layout.
The structure is used to retrieve debug information from firmware when
a command becomes stuck on the device. The reserved field currently
uses 128 u32 entries, which makes the structure larger than intended
and causes the layout to no longer match the firmware definition.
Reduce the reserved array size from 128 to 127 entries so the
structure matches the expected interface format.
Fixes: 25854131c0 ("accel/amdxdna: Support retrieving hardware context debug information")
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260414165625.788853-1-lizhi.hou@amd.com
Trace_dma_fence_signaled, trace_dma_fence_wait_end and
trace_dma_fence_destroy can all currently dereference a null fence->ops
pointer after it has been reset on fence signalling.
Lets use the safe string getters for most tracepoints to avoid this class
of a problem, while for the signal tracepoint we move it to before ops are
cleared to avoid losing the driver and timeline name information. Apart
from moving it we also need to add a new tracepoint class to bypass the
safe name getters since the signaled bit is already set.
For dma_fence_init we also need to use the new tracepoint class since the
rcu read lock is not held there, and we can do the same for the enable
signaling since there we are certain the fence cannot be signaled while
we are holding the lock and have even validated the fence->ops.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 541c8f2468 ("dma-buf: detach fence ops on signal v3")
Cc: Christian König <christian.koenig@amd.com>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20260415083207.40513-2-tvrtko.ursulin@igalia.com
Mailbox message IDs are allocated cyclically. When destroying a mailbox
channel, pending messages are canceled starting from message ID 0. This
results in an incorrect cancellation order when the ID of the last posted
message wraps around and is smaller than the ID of the first posted
message.
Fix this by canceling pending messages starting from the next available
message ID, ensuring the correct ordering across wraparound.
Fixes: a37d78470b ("accel/amdxdna: Replace idr api with xarray")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260413181843.670796-1-lizhi.hou@amd.com
iommu_map_sgtable() returns negative error codes on failure, but the
result is stored in an unsigned variable. This prevents proper error
detection.
Change the variable type to ssize_t so negative error values can be
handled correctly.
Fixes: ece3e89809 ("accel/amdxdna: Allow forcing IOVA-based DMA via module parameter")
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/all/adk7kOUBwIyYnX1M@stanley.mountain/
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Wendy Liang <wendy.liang@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260413180238.668441-1-lizhi.hou@amd.com
Convert this driver to DRM_BRIDGE_ATTACH_NO_CONNECTOR and to the
drm_bridge_connector framework which is the current DRM bridge best
practice.
Based on the in-tree dts[i] files this introduces no regression. Based on
the kernel doc of drm_bridge_connector.c:
* To make use of this helper, all bridges in the chain shall report bridge
* operation flags (&drm_bridge->ops) and bridge output type
* (&drm_bridge->type), as well as the DRM_BRIDGE_ATTACH_NO_CONNECTOR attach
* flag (none of the bridges shall create a DRM connector directly).
and each of the 3 LCDIF blocks in the i.MX8MP, all of them comply with the
above requirement:
* For the LCDIF3, the pipeline is:
LCDIF3 -> fsl,imx8mp-hdmi-pvi -> fsl,imx8mp-hdmi-tx -> HDMI connector
And the involved bridges are:
* fsl,imx8mp-hdmi-pvi has ops = 0 (it doesn't set it) because it
implements none the optional features mentioned by those flags, and it
honors the DRM_BRIDGE_ATTACH_NO_CONNECTOR by propagating it
* fsl,imx8mp-hdmi-tx is implemented based on dw-hdmi, which sets ops as
appropriate and also propagates the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag
* display-connector (enabled via the DT overlay if needed) sets ops and
makes DRM_BRIDGE_ATTACH_NO_CONNECTOR mandatory
* The LCDIF2 involves the panel-bridge, display-connector and lvds-decoder
(even though only the pane-bridge is currently supported), and all these
three also set ops as needed and propagate
DRM_BRIDGE_ATTACH_NO_CONNECTOR or make it mandatory.
* The LCDIF1 is used with the adv7511, tc358767 and the panel bridge
drivers which also comply with the requirements.
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-11-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The imx8mp-hdmi-tx one of many drivers based on dw-hdmi. dw-hdmi in turn
can operate in two different modes, depending on the platform data as set
by the driver:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used [0]
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
The imx8mp-hdmi-tx driver falls in case A. Switching to case B, which is
the current best practice, requires that the HDMI connector is always
described in the live device tree, and a previous commit ensured this is
always the case by adding an overlay in case the device tree does not
comply.
So now we can simply switch to the new mode and support
DRM_BRIDGE_ATTACH_NO_CONNECTOR.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-10-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Describing the HDMI connector in device tree is recommended. While the
overlay insertion is a workaround to avoid breaking existing devices, every
dts should be improved by adding a connector description.
Add a warning to make users aware as far as possible.
As a warning line cannot hold all the relevant info, add a detailed comment
in the code so it easy to find when the warning is seen.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-9-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The imx8mp-hdmi-tx is one of many drivers based on dw-hdmi. dw-hdmi in turn
can operate in two different modes, depending on the platform data as set
by the driver:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used [0]
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
The imx8mp-hdmi-tx driver falls in case A. This implies next_bridge will
always be NULL, and so dw_hdmi_bridge_attach() [1] will always fail if
called with the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.
In fact case A assumes that DRM_BRIDGE_ATTACH_NO_CONNECTOR is not set and
in that case it adds an HDMI Type A connector programmatically at bridge
attach time.
Support for DRM_BRIDGE_ATTACH_NO_CONNECTOR is implemented by dw-hdmi.c in
case B. However switching to base B requires that port@1 is connected to a
"next bridge" DT node, typically the HDMI connector, because dw-hdmi won't
add the connector when using DRM_BRIDGE_ATTACH_NO_CONNECTOR.
Many dts files for imx8mp-based boards in the kernel have such a connector
described and linked to port@1, so the pipeline will be fully attached up
to a display-connector and a drm_connector added by the
bridge-connector. Sadly some of those dts files don't have the connector
described. Adding it would solve the problem easily, but this would break
existing devices which do not update the dtb when upgrading to a newer
kernel.
In preparation for switching to case B while preserving backward
compatibility for such devices, introduce a module adding the
hdmi-connector node to the live device tree at init time. This will allow
the dw-hdmi code to find the next bridge (the one wrapping the
hdmi-connector) and let the pipeline work as before.
The module is inserted only if there is no endpoint in port@1. So boards
whose device tree describe the connector will not have the device tre
modified, and will start isntantiating the correct HDMI connector type as
described in the device tree.
For boards lacking a connector description in DT the overlay will be added,
abd the HDMI connector will be Type A, which is a reasonable fallback and
is what the driver is currently doing.
[0] https://elixir.bootlin.com/linux/v7.0-rc1/source/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c#L3310
[1] https://elixir.bootlin.com/linux/v7.0-rc1/source/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c#L2907
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-8-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver looks up the next_bridge at probe time and stores it in
hdmi->bridge.next_bridge, but only uses the stored value when attaching,
and only in the DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
This will be problematic with an upcoming change, adding an hdmi-connector
using a device tree overlay when not present. That change is in turn
necessary to migrate the i.MX LCDIF driver to the bridge-connector.
The problem is that, adding the hdmi-connector via an overlay, devlink
considers hdmi-connector a consumer of the dw-hdmi device, generating a
chicken-egg problem:
* hdmi-connector probe won't be tried until dw-hdmi is probed (devlink)
* dw-hdmi probe will defer until it finds the next_bridge (the
hdmi-connector wrapper bridge)
In preparation for those changes, move the next_bridge lookup from probe to
attach, when it is actually used. This allows dw-hdmi to probe, so that the
hdmi-connector can probe as well.
Also avoid storing the pointer in hdmi->bridge.next_bridge: the value is
computed when needed, thus a local variable is enough.
Finally, this also allows to slightly improve the code by not doing any DT
lookup in the !DRM_BRIDGE_ATTACH_NO_CONNECTOR case.
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Acked-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Damon Ding <damon.ding@rock-chips.com> # rk3399
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-7-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
dw-hdmi can operate in two different modes, depending on the platform data
as set by the driver:
A. hdmi->plat_data->output_port = 0:
the HDMI output (port@1) in device tree is not used
B. hdmi->plat_data->output_port = 1:
the HDMI output (port@1) is parsed to find the next bridge
Only case B is supported when the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag is
passed to the attach callback. Emit a warning when this is violated. Also
return -EINVAL which would be returned by drm_bridge_attach() right after
anyway.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Tested-by: Damon Ding <damon.ding@rock-chips.com> # rk3399
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-6-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The meaning of this flag may not be obvious at first sight.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Tested-by: Damon Ding <damon.ding@rock-chips.com> # rk3399
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-5-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The bridge and ret variables are per-iteration variables, whose values
don't have to be carried to the next iteration or be used after the loop
end. Move their declaration inside the loop scope as a cleanup and to make
code clearer.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-4-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
lcdif_attach_bridge() uses dev_err_probe() in some error paths, dev_err() +
return in others. Use dev_err_probe() for all of them to make code
consistent, simpler and with better error reporting.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-3-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Putting the remote device_node reference requires a of_node_put(remote) in
two places. Use a cleanup action to simplify the code.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Tested-by: Martyn Welch <martyn.welch@collabora.com>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com> # TQMa8MPxL/MBa8MPxL
Link: https://patch.msgid.link/20260407-drm-lcdif-dbanc-v4-1-247a16e61ef9@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
A job timeout does not necessarily indicate that the device is hung, as
it may still be processing other jobs.
Track whether any jobs have been successfully submitted or completed,
and use this information to determine if the device is making forward
progress. If so, return DRM_GPU_SCHED_STAT_NO_HANG instead of treating
the timeout as a device hang.
In the meanwhile the timeout interval is changed to 2 seconds which meets
the userspace requirement.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260409175826.195665-1-lizhi.hou@amd.com
In order to unify the handling of the panel and bridge, apply
panel_bridge helpers for Analogix DP driver. With this patch, the
bridge support will also become available.
The following changes have ben made:
- Apply plane_bridge helper to wrap the panel as the bridge.
- Remove the explicit panel APIs calls, which can be replaced with
the automic bridge APIs calls wrapped by the panel.
- Remove the unnecessary analogix_dp_bridge_get_modes().
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-9-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The analogix_dp_unbind() should be balanced with analogix_dp_bind().
There are no bridge enabling and panel preparing in analogix_dp_bind(),
so it should be reasonable to remove the bridge disabing and panel
unpreparing in analogix_dp_unbind().
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-8-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Uniformly, move the next bridge attachment to the Analogix side
rather than scattered on Rockchip and Exynos sides. It can also
help get rid of the callback &analogix_dp_plat_data.attach() and
make codes more concise.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-7-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Apply analogix_dp_finish_probe() in order to move the panel/bridge
parsing from Exynos side to the Analogix side.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-6-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Apply analogix_dp_finish_probe() in order to move the panel/bridge
parsing from Rockchip side to the Analogix side.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-5-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Since the panel/bridge should logically be positioned behind the
Analogix bridge in the display pipeline, it makes sense to handle
the panel/bridge parsing on the Analogix side. Therefore, we add
a new API analogix_dp_finish_probe(), which combines the panel/bridge
parsing with component addition, to do it.
In order to process component binding right after the probe completes,
the &analogix_dp_plat_data.ops is newly added to pass &component_ops,
for which the &dp_aux_ep_device_with_data.done_probing() of DP AUX bus
only supports passing &drm_dp_aux.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-4-damon.ding@rock-chips.com
[Luca: propagate 'depends on OF' to DRM_ANALOGIX_DP and reverse dependencies]
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Initialize bridge_connector for both Rockchip and Exynos encoder sides.
Then, make DRM_BRIDGE_ATTACH_NO_CONNECTOR mandatory for Analogix bridge
side, as the private &drm_connector is no longer created.
The previous &drm_connector_funcs and &drm_connector_helper_funcs APIs
are replaced by the corresponding &drm_bridge_funcs APIs:
analogix_dp_atomic_check() -> analogix_dp_bridge_atomic_check()
analogix_dp_detect() -> analogix_dp_bridge_detect()
analogix_dp_get_modes() -> analogix_dp_bridge_get_modes()
analogix_dp_bridge_edid_read()
Additionally, the compatibilities of Analogix DP bridge based on whether
the next bridge is a 'panel'. If it is, OP_MODES and OP_DETECT are
supported; If not (the next bridge is a 'monitor' or a bridge chip),
OP_EDID and OP_DETECT are supported.
The devm_drm_bridge_add() is placed in analogix_dp_bind() instead of
analogix_dp_probe(), because the type of next bridge (the panel, monitor
or bridge chip) can only be determined after the probe process has fully
completed.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> # rk3588
Link: https://patch.msgid.link/20260413132551.1049307-3-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
