Late cleanup and fixes for Samsung DTS:
1. Fix polarity of pins:
- enable GPIO of NFC chip in Exynos5433 TM2 boards,
- vbus GPIO of EHCI in Exynos4412 Origen board.
2. Correct name of pin configuration nodes - redundant "pins" in the
name (no functional impact).
-----BEGIN PGP SIGNATURE-----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=Se/Q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HF5T
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM and ARM64 changes for v6.1
Late cleanup and fixes for Samsung DTS:
1. Fix polarity of pins:
- enable GPIO of NFC chip in Exynos5433 TM2 boards,
- vbus GPIO of EHCI in Exynos4412 Origen board.
2. Correct name of pin configuration nodes - redundant "pins" in the
name (no functional impact).
* tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
Link: https://lore.kernel.org/r/20221003073916.12588-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
EHCI Oxynos (drivers/usb/host/ehci-exynos.c) drives VBUS GPIO high when
trying to power up the bus, therefore the GPIO in DTS must be marked as
"active high". This will be important when EHCI driver is converted to
gpiod API that respects declared polarities.
Fixes: 4e8991def5 ("ARM: dts: exynos: Enable AX88760 USB hub on Origen board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220927220504.3744878-1-dmitry.torokhov@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
According to s3fwrn5 driver code the "enable" GPIO line is driven "high"
when chip is not in use (mode is S3FWRN5_MODE_COLD), and is driven "low"
when chip is in use.
s3fwrn5_phy_power_ctrl():
...
gpio_set_value(phy->gpio_en, 1);
...
if (mode != S3FWRN5_MODE_COLD) {
msleep(S3FWRN5_EN_WAIT_TIME);
gpio_set_value(phy->gpio_en, 0);
msleep(S3FWRN5_EN_WAIT_TIME);
}
Therefore the line described by "en-gpios" property should be annotated
as "active low".
The wakeup gpio appears to have correct polarity (active high).
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220929011557.4165216-1-dmitry.torokhov@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add a L2 cache node referenced from CPU nodes as the missing cache hierarchy
information because the following warning was issued.
cacheinfo: Unable to detect cache hierarchy for CPU 0
Early cacheinfo failed, ret = -2
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-11-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The generic platform driver pcie-designware-plat.c doesn't work for
UniPhier PCIe host controller, because the controller has some
necessary initialization sequence for the controller-specific logic.
Currently the controller doesn't use "snps,dw-pcie" compatible,
so this is no longer needed. Remove the compatible string from the
pcie node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-10-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
To fix dtbs_check warning:
uniphier-ld20-akebi96.dt.yaml: opp-table0: $nodename:0: 'opp-table0' does not match '^opp-table(-[a-z0-9]+)?$'
From schema: Documentation/devicetree/bindings/opp/opp-v2.yaml
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-9-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
PXs3 reference board can change each USB port 0 and 1 to device mode
with jumpers. Prepare devicetree sources for USB port 0 and 1.
This specifies dr_mode, pinctrl, and some quirks and removes nodes for
unused phys and vbus-supply properties.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-8-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ahci core controller and glue layer nodes including reset-controller
and sata-phy.
This supports for PXs3 and the boards.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-7-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use human-readable definitions for GIC interrupt type and flag, instead of
hard-coding the numbers. No functional change.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-6-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to gpio-hog schema, should add the suffix "-hog" to the node
names including gpio-hog to fix the following warning.
uniphier-ld11-ref.dtb: gpio@55000000: 'xirq0' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
This applies to the devicetre for LD11, LD20 and PXs3 SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-5-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This "usb-glue" stands for an external controller associated with USB core,
however, this is not common. So rename to "usb-controller".
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-4-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Actual phy nodes are each child node. The parent node should be
usb-controller node as a representation of the phy integration.
This applies to the devicetree for LD11 SoC.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042321.4817-3-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The generic platform driver pcie-designware-plat.c doesn't work for
UniPhier PCIe endpoint controller, because the controller has some
necessary initialization sequence for the controller-specific logic.
Currently the controller doesn't use "snps,dw-pcie-ep" compatible,
so this is no longer needed. Remove the compatible string from the
pcie-ep node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-10-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The dtschema warning:
uniphier-ld11-ref.dt.yaml: system-bus@58c00000: 'interrupt-parent' does not
match any of the regexes: '^.*@[1-5],[1-9a-f][0-9a-f]+$', 'pinctrl-[0-9]+'
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-9-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ahci core controller and glue layer nodes including reset-controller
and sata-phy.
This supports for PXs2 and the boards without PXs2 vodka board that
doesn't implement any SATA connectors.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-8-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add ahci controller, glue layer, and clock nodes for Pro4 SoC. The glue
layer includes reset and phy, and the clock node is used for handling ahci
clocks on SoC-glue.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-7-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use human-readable definitions for GIC interrupt type and flag, instead of
hard-coding the numbers. No functional change.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-6-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to gpio-hog schema, should add the suffix "-hog" to the node
names including gpio-hog to fix the following warning.
uniphier-pro4-ref.dtb: gpio@55000000: 'xirq2' does not match any of the regexes: '^.+-hog(-[0-9+)?$', 'pinctrl-[0-9]+'
From schema: Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
This applies to the devicetree for LD4, LD6b, Pro4 and sLD8 SoCs.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-5-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This "usb-glue" stands for an external controller associated with USB core,
however, this is not common. So rename to "usb-controller".
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-4-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Actual phy nodes are each child node. The parent node should be
usb-controller node as a representation of the phy integration.
This applies to the devicetree for Pro4 SoC.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Link: https://lore.kernel.org/r/20220913042249.4708-3-hayashi.kunihiko@socionext.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
According to s5k6a3 driver code, the reset line for the chip appears to
be active low. This also matches the typical polarity of reset lines in
general. Let's fix it up as having correct polarity in DTS is important
when the driver will be switched over to gpiod API.
Fixes: b4fec64758 ("ARM: dts: Add camera device nodes for Exynos4412 TRATS2 board")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220913164104.203957-1-dmitry.torokhov@gmail.com
Link: https://lore.kernel.org/r/20220926104354.118578-2-krzysztof.kozlowski@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
DSI support for rk356x, display-gamma-control for rk3399, display
output for quartz64-b and rk3566-roc-pc, hdmi supplies for rk3399-roc-pc,
some pinctrl improvements for the px30-evb and a number of changes to
bring rk3399 rock4 and rock-pi4 structure closer to names used in schematics.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmMvDVkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgdM7B/0XJOFHfOczgScJ/U0lGKOSdyunaBKxjzJ5
Hdz9Zy7SaW0NztHJA8F5TY+Llw6VKR0jULhcJ/HFxQlAlVKlLyQBpL0K71+9evo/
3EKugxgwWTXVUeCycVRIBcHTCB0F2lrITCTudTyA3C+sJWOOX9NJyccQXnwFtf/D
ScQpIEXGB6/iiU9mTup/JY48HiojnXeJLQsXGos+4D+nY9Pm+KwKhpGlBLvNjf/D
wvmGJTgcuDkoXoPHQ15vvUjUbYrqIIehV7s3zKJSTVjZ7upOcDXsnN/CZBtrYiac
HghziTm5Bn66aNY2Q5/iQ8u3a5Vgxx7+li1SR3+iwCr1YERIDjEA
=nNLu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=oYll
-----END PGP SIGNATURE-----
Merge tag 'v6.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
RK3399-Nanopi-R4S-enterprise as variant board, Gru-Scarlet SKU variants,
DSI support for rk356x, display-gamma-control for rk3399, display
output for quartz64-b and rk3566-roc-pc, hdmi supplies for rk3399-roc-pc,
some pinctrl improvements for the px30-evb and a number of changes to
bring rk3399 rock4 and rock-pi4 structure closer to names used in schematics.
* tag 'v6.1-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: use pin constant for reset-gpios on px30-evb
arm64: dts: rockchip: add pinctrl for mipi-pdn pin on px30-evb
arm64: dts: rockchip: set max drive-strength for cif_clkout_m0 on px30-evb
arm64: dts: rockchip: add avdd-0v9-supply and avdd-1v8-supply on rk3399 rock 4c and pi4
arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4
arm64: dts: rockchip: fix regulator name on rk3399-rock-4
arm64: dts: rockchip: sort nodes/properties on rk3399-rock-4c-plus
arm64: dts: rockchip: fix regulator structure on rk3399-rock-4c-plus
arm64: dts: rockchip: connect vcca_1v8 to APIO5_VDD on rk3399-rock-4c-plus
arm64: dts: rockchip: Add DSI and DSI-DPHY nodes to rk356x
arm64: dts: rockchip: Enable HDMI and GPU on quartz64-b
arm64: dts: rockchip: Add RK3399 NanoPi R4S Enterprise Edition
dt-bindings: Add doc for FriendlyARM NanoPi R4S Enterprise Edition
arm64: dts: rockchip: add i2s0 I2S/PDM/TDM 8ch controller to px30
arm64: dts: rockchip: Add HDMI supplies on rk3399-roc-pc
arm64: dts: rockchip: Support gru-scarlet sku{2,4} variants
dt-bindings: arm: rockchip: Add gru-scarlet sku{2,4} variants
arm64: dts: rockchip: enable gamma control on RK3399
arm64: dts: rockchip: Enable video output on rk3566-roc-pc
Link: https://lore.kernel.org/r/38114097.10thIPus4b@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Now that the pinctrl definitions of the ast2600 SoC have been fixed,
see commit 925fbe1f7e ("dt-bindings: pinctrl: aspeed-g6: add FWQSPI
function/group"), it is safe to activate QSPI on the ast2600 evb.
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220603073705.1624351-1-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Removed NIC EEPROM driver IPMB-12 channel and enabled it as
generic i2c EEPROM.
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Link: https://lore.kernel.org/r/20220914115307.GA339@hcl-ThinkPad-T495
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add initial version of device tree for the BMC in the AMD DaytonaX
platform.
AMD DaytonaX platform is a customer reference board (CRB) with an
Aspeed ast2500 BMC manufactured by AMD.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921210950.10568-3-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Document AMD DaytonaX board compatible.
Signed-off-by: Konstantin Aladyshev <aladyshev22@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220921210950.10568-2-aladyshev22@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Added IPMB-13 channel for Debug Card communication which improves the
readability of the machine and makes it easier to debug the server and
it will display some pieces of information about the server like "system
info", "Critical sensors" and "critical sel".
Signed-off-by: Karthikeyan Pasupathi <pkarthikeyan1509@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220926124313.GA8400@hcl-ThinkPad-T495
Signed-off-by: Joel Stanley <joel@jms.id.au>
Remove the gpio-keys entries from the Ampere's Mt. Jade BMC device
tree. The user space applications are going to change from using
libevdev to libgpiod.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20220915080828.2894070-1-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
hardware reference platform with AmpereOne(TM) processor.
Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220817071539.176110-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
A series of changes for am335x baltos and netcom devices to update nand
transfer type and configure gpio-line-names.
-----BEGIN PGP SIGNATURE-----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=lXnZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmMt1XMACgkQmmx57+YA
GNlmnQ/+IqZtomnZn1P+ETeg9cL5HTLDj5HK3YW2L6SqlGlyim1W6M/cpdJgIvuJ
kl4onl3tx4ldlR/PnkQ1hH1OweZIF2Oleog9KTl5o7WNzwe1rNoaHFc0lFP+F3Ha
Tk4bZjdR29y/3hEkei8ESjxs2X2CTD+lCKONZw5IaelT+K5DXlEJ533K71hXWJIH
L3I0FrKUmN5EjarT+ZFyUtiiKaBopD8Sv4tAbQAwb0ZyPD6eEBUV/c93KLM5W+wC
9eQDk8seHAljTe2Cqqe/RcwfDEIS2Gn/xouv3kH9hPO8swjVIAd6fz75Nv47HiPN
/YZ9LwPwz7JxpcX6VLAaYwCqP/UL1AxSbWGs9oV7drPLQTUfn9m1Z7KbU0I5zo4w
u6s8XUOhwGRLptzT3pQHfhsJaCYW5/JK+bqsy/tiI0YzUcEKecDr5vCZHuzpzeo5
cx+yJPEXMYOKbt6jOGNPf6+axkXat1zXryDYTm2wOs7GabqGxFFQ/7Zwkxlvwbin
LBu1XVUZKrJEsvwdB7MgGnKBviPIeGf4Z4aIEffsAG7tlfvb7aK21rQVkUXJ0JpT
JVHNiy5cchCP7moXgYVNGbthkOJw83kiz+kKyvL6DGeF8uWeCUxmkHANJpaGn1eQ
XS+ZaofIjWz/UKQ5Ga5AQgqvZGgUimEu5PcphftgymRFTnXqoJs=
=t/Cb
-----END PGP SIGNATURE-----
Merge tag 'omap-for-6.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omaps
A series of changes for am335x baltos and netcom devices to update nand
transfer type and configure gpio-line-names.
* tag 'omap-for-6.1/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 2-port devices
ARM: dts: am335x-netcom: add GPIO names for NetCom Plus 8-port devices
ARM: dts: am335x-netcan: add GPIO names for NetCAN Plus device
ARM: dts: am335x-baltos: add GPIO names for ir2110 device
ARM: dts: am335x-baltos: add GPIO names for ir3220 and ir5221 devices
ARM: dts: am335x-baltos: change nand-xfer-type
Link: https://lore.kernel.org/r/pull-1663587735-853102@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Device tree label property should contain label from the box/stick.
Labels for other ports are already specified in DT but wan is missing.
So add missing label for wan port.
Fixes: 26ca8b52d6 ("ARM: dts: add support for Turris Omnia")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Turris Omnia has GPIO51 exported on pin header U16, which works in S/PDIF
output mode. So define S/PDIF audio output card for this pin.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
S/PDIF function on Armada 38x uses only mpp51 pin. So add spdif-pins mpp
pins section for it. It is needed for boards without i2s.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This commit adds the necessary Device Tree information to enable
audio support on the Armada 385 DB platform. In details it:
* Instantiates the CS42L51 audio codec on the I2C0 bus
* Adds simple-card DT binding for audio on Armada 385 DB
* Adds description for both analog I2S and S/PDIF I/O
* Disabled by default
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Star_Automation <star@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This commit adds the description of the I2S controller to the Marvell
Armada 38x SoC's Device Tree, as well as its pin configuration.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Nadav Haklai <nadavh@marvell.com>
Tested-by: Lior Amsalem <alior@marvell.com>
[pali: Fix i2s-pins name]
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
-----BEGIN PGP SIGNATURE-----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=XT9N
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ZHbe
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.
The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.
MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.
A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.
-----BEGIN PGP SIGNATURE-----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=W/0i
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=jPGF
-----END PGP SIGNATURE-----
Merge tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM DTS updates for 6.1
This adds extends the IPQ8064 support with the two variants IPQ8062 and
IPQ8065. MSM8974 and APQ8084 gained RPM stats support.
The Audio DSP remoteproc was added to MSM8226 and enabled for ASUS
ZenWatch 2 and LG G Watch R.
MSM8660 gained one I2C and one SPI bus and the APQ8060 Dragonboard got
the TMA340 Touchscreen described.
A wide range of improvements are done throughout the DTS files to align
with bindings, fix issues and improve structure on things.
* tag 'qcom-dts-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (35 commits)
ARM: dts: qcom: apq8026-lg-lenok: Enable ADSP
ARM: dts: qcom: apq8026-asus-sparrow: Enable ADSP
ARM: dts: qcom: msm8226: Add ADSP node
ARM: dts: qcom: ipq8064: pad addresses to 8 digit
ARM: dts: qcom: ipq8064: reorganize node order and sort them
ARM: dts: qcom: align SDHCI clocks with DT schema
ARM: dts: qcom: align SDHCI reg-names with DT schema
ARM: dts: qcom: msm8960: add clocks to the MMCC device node
ARM: dts: qcom: apq8064: add clocks to the MMCC device node
ARM: dts: qcom: msm8960: add clocks to the GCC device node
ARM: dts: qcom: apq8064: add clocks to the GCC device node
ARM: dts: qcom: msm8960: add clocks to the LCC device node
ARM: dts: qcom: apq8064: add clocks to the LCC device node
ARM: dts: qcom: msm8226: switch TCSR mutex to MMIO
ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO
ARM: dts: qcom: msm8660: fix node names for fixed clocks
ARM: dts: qcom: msm8660: add pxo/cxo clocks to the GCC node
ARM: dts: qcom: apq8060-dragonboard: Add TMA340 to APQ8060 DragonBoard
ARM: dts: qcom: msm8660: Add GSBI3 I2C bus
ARM: dts: qcom: msm8660: Add GSBI1 SPI bus
...
Link: https://lore.kernel.org/r/20220921222619.1338380-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
