Extend the existing Tegra186 GPIO controller device tree bindings with
support for the GPIO controllers found on Tegra238. Tegra238 has two
GPIO controllers: the main controller and always-on (AON) controller.
The number of pins is slightly different, but the programming model
remains the same.
Add a new header, include/dt-bindings/gpio/nvidia,tegra238-gpio.h,
that defines port IDs as well as the TEGRA238_MAIN_GPIO() helper,
both of which are used in conjunction to create a unique specifier
for each pin.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260514124835.108532-1-pshete@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
The mentioned robustness is relevant for a planned change to struct
i2c_device_id that replaces .driver_data by an anonymous union.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260512152125.924433-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
-----BEGIN PGP SIGNATURE-----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=tVLe
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-gpio-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next
Immutable branch between MFD and GPIO due for the v7.2 merge window
Add support for the EIO GPIO controller found on
xa2ve3288 silicon.
The EIO GPIO block provides access to multiplexed I/O pins exposed
through the EIO interface. Only bank 0 and bank 1 are connected to
external MIO pins, with 26 GPIOs per bank (52 GPIOs total). This
change extends the Zynq GPIO driver to support the EIO GPIO
variant.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://patch.msgid.link/20260512060917.2096456-4-shubhrajyoti.datta@amd.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
EIO (Extended IO) GPIO is a Xilinx IP block that exposes
multiplexed I/O pins through an EIO interface.
The EIO GPIO block has 2 banks with 26 GPIOs each (52 total).
The GPIO width cannot be determined from the hardware registers,
the driver relies on the compatible string to select the correct
bank/pin configuration. A new compatible is therefore required.
The block is currently present on xa2ve3288 silicon.
The compatible string uses version 1.0 matching the IP core version.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Link: https://patch.msgid.link/20260512060917.2096456-3-shubhrajyoti.datta@amd.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
If a GPIO line has a fixed direction, report an error if a consumer
anyway tries to set the direction to something other than what it is
hardcoded to.
This didn't happen much before because what we supported was all lines
input or output and then the implementer would probably not specify the
direction registers, but with sparse fixed direction we can have
a mixture so let's take this into account.
As a consequence, since gpio_regmap_set_direction() can now fail, alter
the semantics in gpio_regmap_direction_output() such that we first check
if we can set the direction to output before we set the value and the
direction.
Suggested-by: Sashiko <sashiko-bot@kernel.org>
Link: https://sashiko.dev/#/patchset/20260507-regmap-gpio-sparse-fixed-dir-v1-1-a2e5855e2701%40kernel.org
Signed-off-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Alex Elder <elder@riscstar.com>
Tested-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20260511-regmap-gpio-sparse-fixed-dir-v3-2-1429ec453be7@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The SPEAr SPI chip-select GPIO driver only depends on generic platform,
OF, and MMIO interfaces, so it can be built outside SPEAr platform
configurations.
Enable compile-test coverage to catch build regressions on other
architectures.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260510195531.10561-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
- add the gpiod_is_single_ended() helper function
-----BEGIN PGP SIGNATURE-----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=J9un
-----END PGP SIGNATURE-----
Merge tag 'ib-gpio-add-gpiod-is-single-ended-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into gpio/for-next
Immutable branch betweeb the GPIO and I2C trees for v7.2-rc1
- add the gpiod_is_single_ended() helper function
The direction of a single-ended (open-drain or open-source) GPIO line
cannot always be reliably determined by reading hardware registers.
In true open-drain implementations, the "high" state is achieved by
entering a high-impedance mode, which many hardware controllers report
as "input" even if the software intends to use it as an output.
This creates issues for consumer drivers (like I2C) that rely on
gpiod_get_direction() to decide if a line can be driven.
Introduce gpiod_is_single_ended() to allow consumers to check the
software configuration (GPIO_FLAG_OPEN_DRAIN/GPIO_FLAG_OPEN_SOURCE) of
a descriptor. This provides a robust way to identify lines that are
capable of being driven, regardless of their instantaneous hardware state.
Signed-off-by: Jie Li <jie.i.li@nokia.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260511113726.49041-2-jie.i.li@nokia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
- add fwnode_gpiod_get() helper to GPIOLIB
-----BEGIN PGP SIGNATURE-----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=JPyU
-----END PGP SIGNATURE-----
Merge tag 'ib-gpio-add-fwnode-gpiod-get-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into gpio/for-next
Immutable branch between the GPIO and PCI trees for v7.2
- add fwnode_gpiod_get() helper to GPIOLIB
Add fwnode_gpiod_get() as a convenience wrapper around
fwnode_gpiod_get_index() for the common case where only the
first GPIO is required.
This mirrors existing gpiod_get() and devm_gpiod_get() helpers
and avoids open-coding index 0 at call sites.
Suggested-by: Manivannan Sadhasivam <mani@kernel.org>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-wakeirq_support-v10-1-c10af9c9eb8c@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The ZEVIO GPIO driver uses generic platform, MMIO, and gpiolib interfaces.
Allow it to build with COMPILE_TEST so it gets coverage on non-ARM
platforms.
Drop the ARM-specific IOMEM() casts around the register pointer. The
pointer is already __iomem, so readl() and writel() can use it directly.
Tested with:
make LLVM=1 ARCH=loongarch drivers/gpio/gpio-zevio.o
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260509003438.956051-1-rosenp@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The Waveshare DSI TOUCH family of panels has separate on-board GPIO
controller, which controls power supplies to the panel and the touch
screen and provides reset pins for both the panel and the touchscreen.
Also it provides a simple PWM controller for panel backlight. Add
support for this GPIO controller.
Tested-by: Riccardo Mereu <r.mereu@arduino.cc>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507-waveshare-dsi-touch-v5-2-d2ac7ccc22d4@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The Waveshare DSI TOUCH family of panels has separate on-board GPIO
controller, which controls power supplies to the panel and the touch
screen and provides reset pins for both the panel and the touchscreen.
Also it provides a simple PWM controller for panel backlight.
Add bindings for these GPIO controllers. As overall integration might be
not very obvious (and it differs significantly from the bindings used by
the original drivers), provide complete example with the on-board
regulators and the DSI panel.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260507-waveshare-dsi-touch-v5-1-d2ac7ccc22d4@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
With no more users, we can remove timb_gpio.h.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-timberdale-swnode-v3-4-9a1bc1b2b124@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The top-level MFD driver now passes the device properties to the GPIO
cell via the software node. Use generic device property accessors and
stop using platform data. We can ignore the "ngpios" property here now
as it will be retrieved internally by GPIO core.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-timberdale-swnode-v3-3-9a1bc1b2b124@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
Using generic device properties instead of custom platform data
structures is preferred due to the resulting unification of the way
properties are accessed in consumer drivers. There's no DT node for the
GPIO cell in this driver but we can create a software node with device
properties and attach it to all the GPIO cells.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260327-gpio-timberdale-swnode-v3-2-9a1bc1b2b124@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
This symbol is only used inside the Timberdale MFD driver. Move into
the .c file as there's no need for it to be exposed in a header.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260327-gpio-timberdale-swnode-v3-1-9a1bc1b2b124@oss.qualcomm.com
Signed-off-by: Lee Jones <lee@kernel.org>
The compiler fills in zeros as needed, so there is no technical reason
to add explicit zeros at the end of a list initializer. Drop them.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260506144918.2445358-2-u.kleine-koenig@baylibre.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
74HC595 and 74LVC594 chains retain their output state from the first
serial write onwards. Today the driver always kicks that first write
from a zero-initialised buffer, so every output comes up low until user
space issues a write. Boards that rely on the chain to drive signals
whose power-on state matters (active-low indicators, reset lines, etc.)
have no way to express the desired initial pattern via DT.
Read the optional lines-initial-states bitmask, recently documented for
this binding, into chip->buffer before the first
__gen_74x164_write_config() so the chain comes up in a known state on
the very first SPI transaction. Bit N maps to GPIO line N (matching the
nxp,pcf8575 convention); on this output-only device, bit=0 drives the
line low and bit=1 drives it high. Property absence keeps the existing
zeroing behaviour intact.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanhong Jung <happycpu@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260429035134.1023330-3-happycpu@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The 74HC595 and 74LVC594 shift registers latch their outputs until the
first serial write, so boards that depend on a specific power-on pattern
(for example active-low indicators, reset lines, or other signals that
must come up non-zero) have no way to express that today: the Linux
driver always writes zeros from its zero-initialised buffer during
probe.
Document support for the existing lines-initial-states bitmask, already
defined for nxp,pcf8575, so the same convention covers this output-only
device. Bit N corresponds to GPIO line N. Because the 74HC595/74LVC594
family is push-pull output only (no input mode, no high-impedance state
under software control), bit=0 drives the line low and bit=1 drives it
high; this differs from nxp,pcf8575, where the 0/1 polarity reflects the
quasi-bidirectional nature of that part.
The bitmask covers up to 32 lines, which fits the typical 1-4 chip
cascades that appear in tree. Should longer chains require seeding in
the future, the property can be extended to a uint32-array without
breaking the bit-N-equals-line-N convention.
Suggested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chanhong Jung <happycpu@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260429035134.1023330-2-happycpu@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Split the old contents from gpio.h for clarity. Ideally any driver
that still includes linux/gpio.h can now be ported over to use
either linux/gpio/legacy.h or linux/gpio/consumer.h, with the
original file getting removed once that is complete.
No functional changes intended for now.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260428154522.2861492-1-arnd@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
If we use the generic GPIO lib for MMIO in the Altera driver
we do not only cut down on the code, we also get get/set_multiple
for free.
Keep the local raw spinlock instead of reusing the bgpio spinlock
because it makes the gpiochip and irqchip nicely orthogonal.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20260427-gpio-mmio-more-v3-3-fe1882351424@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
If the user did not pass a parent in the struct gpio_chip
then use the device used for devres as parent.
This is quite intuitive and can help avoiding having to
assign parent explicitly in every driver using devres
to add the gpiochip.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20260427-gpio-mmio-more-v3-1-fe1882351424@kernel.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Replace sprintf() function calls with sysfs_emit() in the configfs show
callbacks. This will help harden the driver and will bring the driver
up-to-date with more modern functions.
Suggested-by: Bartosz Golaszewski <brgl@kernel.org>
Signed-off-by: Maxwell Doose <m32285159@gmail.com>
Link: https://patch.msgid.link/20260428113439.9783-1-m32285159@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Most IXP4xx platforms are Device Tree-based, and GPIO consumers
use phandle-based descriptors rather than legacy integer GPIO numbers.
Audit of the IXP4xx platform shows:
- No gpio_request(), gpio_get_value(), or gpio_set_value() users
in arch/arm/mach-ixp4xx/
- No platform data using fixed GPIO numbers
This switches the gpiochip to dynamic base allocation, aligning
with modern gpiolib expectations where GPIO numbers are not globally
fixed and may be assigned dynamically.
Set gpiochip.base = -1 to allow gpiolib to assign the GPIO base
dynamically, avoiding global GPIO number space conflicts.
Signed-off-by: Mohamed Ayman <mohamedaymanworkspace@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260427214311.331996-1-mohamedaymanworkspace@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Move a workaround for misdescribed GPIOs from the wsa881x to use a
generic implementation in gpiolib-of.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmnwK+QACgkQJNaLcl1U
h9DoIwgAhjSAeww7KYamhgxhqYeheu88W8vp5KGgQ6J9jdaQO7CL+4zNOwEeEFTm
qUm/5oBYtneCVEiaFJNN8dEOWvqYmJ7rAThhnmJfNS425NTXUozCAJ/wSQ3RpnJJ
ZuhXeJVLT8Mm2Nc0Z7roTM4tdoJbT1xjYsua2PVupQap4Gd/CbgUUkg3Of6WBsMg
cCrfmSzS7SlCDZU9iTfkusi6ZaUIhYB7rXowBL96Fi4dACk8sNoPvo/BNvw14Al2
7F4P/nsns2zkdlRMbbZbkuiUwOFNQQ97AYySWOGypQkldTM8Nwwz6YtVx3nRXocQ
LxcgL+FJDZj6m6kZZ56lSB/yMvBkIQ==
=VqQb
-----END PGP SIGNATURE-----
Merge tag 'asoc-wsa881x-gpiolib-of' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into gpio/for-next
ASoC: wsa881x: Move custom workaround to gpiolib-of
Move a workaround for misdescribed GPIOs from the wsa881x to use a
generic implementation in gpiolib-of.
The WSA881x codec driver has a local workaround for old device
trees that have the "powerdown" GPIO flagged as active high,
despite it is active low.
This quirk can be replaced by a single quirk entry in
gpiolib-of.c
Drop all polarity inversion code and drop the surplus
gpiod_direction_output() call in probe() since we now set up
the line correctly when getting the GPIO.
Also drop the inclusion of the unused <linux/gpio.h>.
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260427-asoc-wsa881x-v2-1-9ef965f94624@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the temporary fallback handle_simple_irq with handle_bad_irq
now that the driver operates with a proper hierarchical IRQ setup.
This ensures unexpected or unmapped interrupts are clearly flagged
instead of being silently handled.
Signed-off-by: Mohamed Ayman <mohamedaymanworkspace@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260424115920.54707-1-mohamedaymanworkspace@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Raspberry Pi 3B by marking the VEC clk critical so it doesn't get
turned off and hang the bus.
-----BEGIN PGP SIGNATURE-----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=JtUn
-----END PGP SIGNATURE-----
Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
- Drop class_create() for the "tsm" class
-----BEGIN PGP SIGNATURE-----
iIYEABYKAC4WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCae40aBAcZGpid0BrZXJu
ZWwub3JnAAoJEN+KhhkeUWxn/F0BAIpdhnq3TbPMC6Pj0q3DfcXpP+LPD0pqqIom
TwsQVZJCAP4rYVEbIbgeXvkilr7Fpcs2AXbidR/ggBsR3lyVBSNhAA==
=ZK/r
-----END PGP SIGNATURE-----
Merge tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull PCIe TSP update from Dan Williams:
"A small update for the TSM core. It is arguably a fix and coming in
late as I have been offline the past few weeks:
- Drop class_create() for the 'tsm' class"
* tag 'tsm-for-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
virt: coco: change tsm_class to a const struct
- kbuild: builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds.
- kbuild: Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep.
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Mathias Krause <minipli@grsecurity.net>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Thomas Weißschuh <linux@weissschuh.net>
-----BEGIN PGP SIGNATURE-----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=yCeR
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nicolas Schier:
- builddeb - avoid recompiles for non-cross-compiles
Avoid triggering complete rebuilds for non-cross-compile Debian
package builds by only triggering the rebuild of host tools for
actual cross-compile builds
- Never respect CONFIG_WERROR / W=e to fixdep
Avoid spurious rebuilds of fixdep w/ and w/o -Werror during a single
kbuild invocation by never respecting CONFIG_WERROR for fixdep
* tag 'kbuild-fixes-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Never respect CONFIG_WERROR / W=e to fixdep
kbuild: builddeb - avoid recompiles for non-cross-compiles
Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode
-----BEGIN PGP SIGNATURE-----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=mY/t
-----END PGP SIGNATURE-----
Merge tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- add data_race() in rtc_dev_poll()
Drivers:
- remove i2c_match_id usage
- abx80x: Disable alarm feature if no interrupt attached
- ti-k3: support resuming from IO DDR low power mode"
* tag 'rtc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: abx80x: Disable alarm feature if no interrupt attached
rtc: ntxec: fix OF node reference imbalance
rtc: pic32: allow driver to be compiled with COMPILE_TEST
rtc: ti-k3: Add support to resume from IO DDR low power mode
rtc: cmos: Use platform_get_irq_optional() in cmos_platform_probe()
dt-bindings: rtc: add olpc,xo1-rtc to trivial-rtc
dt-bindings: rtc: sc2731: Add compatible for SC2730
rtc: add data_race() in rtc_dev_poll()
rtc: armada38x: zalloc + calloc to single allocation
dt-bindings: rtc: isl12026: convert to YAML schema
dt-bindings: rtc: microcrystal,rv3028: Allow to specify vdd-supply
rtc: max77686: convert to i2c_new_ancillary_device
dt-bindings: rtc: mpfs-rtc: permit resets
rtc: rx8025: Remove use of i2c_match_id()
rtc: rv8803: Remove use of i2c_match_id()
rtc: rs5c372: Remove use of i2c_match_id()
rtc: pcf2127: Remove use of i2c_match_id()
rtc: m41t80: Remove use of i2c_match_id()
rtc: abx80x: Remove use of i2c_match_id()
mentioning separately: Rafael's commit converting tpm_crb from ACPI driver
to a platform driver. Starting from this release cycle, the branch with TPM
changes mirrored to next is 'for-next-tpm', and patches for keys have their
own separate 'for-next-keys' branch.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaezVbgAKCRAaerohdGur
0ggHAQDmhaZ2C3ddAV1WjfXh1YqdWAmqEqoP7ZHAh4OrjyRPTQD+Pc4xl9TSOgHx
/9WzzV6AM6fL5RuC2/PO5RvOKF9mswc=
=tpJM
-----END PGP SIGNATURE-----
Merge tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm updates from Jarkko Sakkinen:
"Here are the accumulated fixes for 7.1-rc1 and a single structural
change worth mentioning separately: Rafael's commit converting tpm_crb
from ACPI driver to a platform driver"
* tag 'for-next-tpm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: tpm_tis: stop transmit if retries are exhausted
tpm: tpm_tis: add error logging for data transfer
tpm: avoid -Wunused-but-set-variable
tpm: Use kfree_sensitive() to free auth session in tpm_dev_release()
tpm2-sessions: Fix missing tpm_buf_destroy() in tpm2_read_public()
tpm: Fix auth session leak in tpm2_get_random() error path
tpm: i2c: atmel: fix block comment formatting
tpm_crb: Convert ACPI driver to a platform one
tpm: Make tcpci_pm_ops variable static const
Since v2025.11.22:
Initial SoC Slider support
SoC Slider is an SoC-wide power/performance policy setting.
On SoC Slider systems, EPP plays a diminished role.
Whitespace cleanup via: indent -npro -kr -i8 -ts8 -sob -l160 -ss -ncs -cp1
No functional changes
Signed-off-by: Len Brown <len.brown@intel.com>
x86_energy_perf_policy accesses the SoC Slider via standard
user/kernel APIs to the processor_thermal_soc_slider driver.
Machines that support SoC Slider largely use it instead of EPP,
which may continue to exist in a diminished role, or vanish entirely.
Signed-off-by: Len Brown <len.brown@intel.com>
When processor_thermal_soc_slider is loaded, its slider
and offset modparams are visible. Check that the driver
actually registered the profile named "SoC Slider" before
reading or writing these modparams.
n.b. This utility allows writing the Slider and Offset modparams
even if the driver policy is not "balanced". Currently the
processor_thermal_soc_slider consults those modparams
only in "balanced" mode.
Signed-off-by: Len Brown <len.brown@intel.com>
On Raspberry Pi 3B, the VEC clock is used by the VideoCore firmware
display driver, which remains active until the vc4 driver loads and
sends NOTIFY_DISPLAY_DONE. If this clock is disabled during boot, a bus
lockup happens and the firmware becomes unresponsive, causing a complete
system lockup.
Mark the VEC clock with CLK_IGNORE_UNUSED so it survives the unused
clock disablement and remains available until the vc4 driver takes over
display management.
Fixes: 672299736a ("clk: bcm: rpi: Manage clock rate in prepare/unprepare callbacks")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/r/5f0bec08-f458-4fba-8bf3-06817a100c4c@sirena.org.uk
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patch.msgid.link/20260401111416.562279-2-mcanal@igalia.com
Tested-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Brian Masney <bmasney@redhat.com> # Active contributor to clk
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Several development updates for 7.1-rc1:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
-----BEGIN PGP SIGNATURE-----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=arB6
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM updates from Russell King:
- fix a race condition handling PG_dcache_clean
- further cleanups for the fault handling, allowing RT to be enabled
- fixing nzones validation in adfs filesystem driver
- fix for module unwinding
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9463/1: Allow to enable RT
ARM: 9472/1: fix race condition on PG_dcache_clean in __sync_icache_dcache()
ARM: 9471/1: module: fix unwind section relocation out of range error
fs/adfs: validate nzones in adfs_validate_bblk()
ARM: provide individual is_translation_fault() and is_permission_fault()
ARM: move FSR fault status definitions before fsr_fs()
ARM: use BIT() and GENMASK() for fault status register fields
ARM: move is_permission_fault() and is_translation_fault() to fault.h
ARM: move vmalloc() lazy-page table population
ARM: ensure interrupts are enabled in __do_user_fault()
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of
the saved ring buffer. This is because the ring buffer being read by
user space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other accounting
as well. On boot up, the "reader page" is accounted for but a rewind may
put it back into the buffer and then the reader page may be accounted
for again.
Save off the original reader page and skip accounting it when scanning
the pages in the ring buffer.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaevLRxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsNBAQCO9T+3kbDLD/DxRBYjeMXhTg2iY2OV
SHV9jEzcYTahmwEAqVCFY9sNxVYXait/C924SmHCSi1N0HrIuEzIEd29iwk=
=bv+t
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Fix accounting of persistent ring buffer rewind
On boot up, the head page is moved back to the earliest point of the
saved ring buffer. This is because the ring buffer being read by user
space on a crash may not save the part it read. Rewinding the head
page back to the earliest saved position helps keep those events from
being lost.
The number of events is also read during boot up and displayed in the
stats file in the tracefs directory. It's also used for other
accounting as well. On boot up, the "reader page" is accounted for
but a rewind may put it back into the buffer and then the reader page
may be accounted for again.
Save off the original reader page and skip accounting it when
scanning the pages in the ring buffer.
* tag 'trace-ring-buffer-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Do not double count the reader_page
