Since 3D merge allows for larger modes to be supported across 2 layer
mixers, filter modes based on adjusted mode clock / 2 when 3d merge is
supported.
Reported-by: Abel Vesa <abel.vesa@linaro.org>
Fixes: 62b7d68352 ("drm/msm/dpu: Filter modes based on adjusted mode clock")
Signed-off-by: Jessica Zhang <jessica.zhang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/676353/
Link: https://lore.kernel.org/r/20250923-modeclk-fix-v2-1-01fcd0b2465a@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
YUV formats on this hardware needs scaling for chroma planes. However it
is not implemented for QSEED2 which breaks display pipeline if YUV format
is used (causing partial and corrupted output with PPDONE timeouts).
This patch temporarily disables YUV by switching affected sub-block to
RGB only format list.
Fixes: daf9a92dae ("drm/msm/dpu: Add support for MSM8996")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/682061/
Link: https://lore.kernel.org/r/20251018-b4-dpu-fixes-v1-6-1852278064d0@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
UBWC-related register configuration for writeback is not implemented in
the driver yet but there aren't any checks for non-linear modifiers in
atomic_check. Thus when compressed framebuffer is attached to writeback
connector it will be filled with linear image data. This patch forbids
non-linear modifiers for writeback framebuffers until UBWC support for
writeback is properly implemented.
Fixes: 71174f362d ("drm/msm/dpu: move writeback's atomic_check to dpu_writeback.c")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/681922/
Link: https://lore.kernel.org/r/20251017-b4-dpu-fixes-v1-5-40ce5993eeb6@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In _dpu_plane_setup_pixel_ext function instead of dividing just chroma
source resolution once (component 1 and 2), second component is divided
once more because src_w and src_h variable is reused between iterations.
Third component receives wrong source resolution too (from component 2).
To fix this introduce temporary variables for each iteration.
Fixes: dabfdd89ea ("drm/msm/disp/dpu1: add inline rotation support for sc7280")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/681921/
Link: https://lore.kernel.org/r/20251017-b4-dpu-fixes-v1-4-40ce5993eeb6@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Scaling is not implemented for some type of scalers (QSEED2 and RGB) but
it was unintentionally re-enabled with change below. The remaining
condition in dpu_plane_atomic_check_pipe is not enough because it only
checks for length of scaler block (which is present). This patch adds a
additional check for setup_scaler operation.
Fixes: 8f15005783 ("drm/msm/dpu: move scaling limitations out of the hw_catalog")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/681918/
Link: https://lore.kernel.org/r/20251017-b4-dpu-fixes-v1-3-40ce5993eeb6@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The dpu_plane_virtual_assign_resources function might fail if there is
no suitable SSPP(s) for the plane. This leaves sspp field in plane
state uninitialized and later leads to NULL dereference during commit:
Call trace:
_dpu_crtc_blend_setup+0x194/0x620 [msm] (P)
dpu_crtc_atomic_begin+0xe4/0x240 [msm]
drm_atomic_helper_commit_planes+0x88/0x358
msm_atomic_commit_tail+0x1b4/0x8b8 [msm]
commit_tail+0xa8/0x1b0
drm_atomic_helper_commit+0x180/0x1a0
drm_atomic_commit+0x94/0xe0
drm_mode_atomic_ioctl+0xa88/0xd60
drm_ioctl_kernel+0xc4/0x138
drm_ioctl+0x364/0x4f0
__arm64_sys_ioctl+0xac/0x108
invoke_syscall.constprop.0+0x48/0x100
el0_svc_common.constprop.0+0x40/0xe8
do_el0_svc+0x24/0x38
el0_svc+0x30/0xe0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
Fixes: 3ed12a3664 ("drm/msm/dpu: allow sharing SSPP between planes")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/681916/
Link: https://lore.kernel.org/r/20251017-b4-dpu-fixes-v1-2-40ce5993eeb6@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Due to condition in dpu_rm_reserve_sspp, RGB SSPPs are only tried when
scaling is requested, which prevents those SSPPs from being reserved if
we don't need scaling at all. Instead we should check if YUV support is
requested, since scaling on RGB SSPPs is optional and is not implemented
in driver yet.
Fixes: 774bcfb731 ("drm/msm/dpu: add support for virtual planes")
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/681914/
Link: https://lore.kernel.org/r/20251017-b4-dpu-fixes-v1-1-40ce5993eeb6@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When in bonded DSI mode, only one PLL in one DSI PHY is used for both
DSI PHYs, meaning that parents of the secondary DSI PHY will use the
primary DSI PHY PLL as parent.
In this case the primary DSI PHY PLL will be set even if the primary
DSI PHY is not yet enabled. The DSI PHY code has support for this
particular use-case and will handle the fact the PLL was already
set when initializing the primary DSI PHY.
By introducing a protected variable pll_enable_cnt in the commit
cb55f39bf7 ("drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared"),
this variable is only initially set to 1 when the DSI PHY is initialized
making it impossible to set the PLL before, breaking the bonded DSI
use case by returning 0 when setting the PLL from the secondary DSI
PHY driver and skipping the correct clocks initialization.
But since it was already possible to set the PLL without enabling
the DSI PHY, just drop the pll_enable_cnt setting from the PHY
enable/disable and simply increment/decrement the pll_enable_cnt
variable from the dsi_pll_enable/disable_pll_bias to make sure any
PLL operation is done with the PLL BIAS enabled.
Fixes: cb55f39bf7 ("drm/msm/dsi/phy: Fix reading zero as PLL rates when unprepared")
Closes: https://lore.kernel.org/all/50a49d72-2b1e-471d-b0c4-d5a0b38b2a21@linaro.org/
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/683688/
Link: https://lore.kernel.org/r/20251027-topic-sm8x50-fix-dsi-bonded-v1-1-a477cd3f907d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[Why&How]
Return -EINVAL when userspace asks us to enable vblank on a crtc that is
not yet enabled.
Suggested-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1856
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cb57b8cdb0)
Cc: stable@vger.kernel.org
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE or
Gnome.
This add another quirk to worksaround to skip VSC that is incompatible
with an eDP panel.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4452
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99441824be)
Cc: stable@vger.kernel.org
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: e8529dbc75 ("drm/amdgpu: add ip offset support for cyan skillfish")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 102c4f7c55)
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: d1bb646510 ("drm/amdgpu: add irq source ids for VCN5_0/JPEG5_0")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68c20d7b17)
This should be MIT. The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.
Fixes: 523b69c654 ("drm/amd/include: Add amd cper header")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 72c5482cb0)
These should be MIT. The driver in general is MIT and
the license text at the top of the files is MIT so fix
it.
Fixes: 92d5d2a09d ("drm/amdgpu: Introduce funcs for populating CPER")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit abd3f87640)
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18aafc59b1 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92b0a6ae66)
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.
Fixes: 18edef19ea ("drm/amd/powerplay: implement fw image related smu interface for Fiji.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c52238c9fb)
'table_index' is a variable defined by the smu driver (kmd)
'table_id' is a variable defined by the hw smu (pmfw)
This code should use table_index as a bounds check.
Fixes: caad2613dc ("drm/amd/powerplay: move table setting common code to smu_cmn.c")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fca0c66b22)
Before commit 33056a97ae ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
checked the low-power debug flag before calling
dpp3_power_on_blnd_lut(false).
After commit 33056a97ae ("drm/amd/display: Remove double checks for
`debug.enable_mem_low_power.bits.cm`"), dpp3_program_blnd_lut(NULL)
unconditionally calls dpp3_power_on_blnd_lut(false). The BLNDGAM power
helper writes BLNDGAM_MEM_PWR_FORCE when CM low-power is disabled, causing
immediate SRAM power toggles instead of deferring at vupdate. This can
disrupt atomic color/LUT sequencing during transitions between
direct scanout and composition within gamescope's DRM backend on
Steam Deck OLED.
To fix this, leave the BLNDGAM power state unchanged when low-power is
disabled, matching dpp3_power_on_hdr3dlut and dpp3_power_on_shaper.
Fixes: 33056a97ae ("drm/amd/display: Remove double checks for `debug.enable_mem_low_power.bits.cm`")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 13ff4f63fc)
Cc: stable@vger.kernel.org
v1:
Pause the workload setting in dm when doinn idle optimization
v2:
Rebase patch to latest kernel code base (kernel 6.16)
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit bc6d54ac7e)
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() drm_put_dev()'ing to trigger it to be free'd
should be done by devres.
However, drm_put_dev() is still in the probe error and device remove
paths. When the driver fails to probe warnings like the following are
shown because devres is trying to drm_put_dev() after the driver
already did it.
[ 5.642230] radeon 0000:01:05.0: probe with driver radeon failed with error -22
[ 5.649605] ------------[ cut here ]------------
[ 5.649607] refcount_t: underflow; use-after-free.
[ 5.649620] WARNING: CPU: 0 PID: 357 at lib/refcount.c:28 refcount_warn_saturate+0xbe/0x110
Fixes: a9ed2f052c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3eb8c0b4c0)
Since the allocation of the drivers main structure was changed to
devm_drm_dev_alloc() rdev is managed by devres and we shouldn't be calling
kfree() on it.
This fixes things exploding if the driver probe fails and devres cleans up
the rdev after we already free'd it.
Fixes: a9ed2f052c ("drm/radeon: change drm_dev_alloc to devm_drm_dev_alloc")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 16c0681617)
[Why]
Newer VPE microcode has functionality that will decrease DPM level
only when a workload has run for 2 or more seconds. If VPE is turned
off before this DPM decrease and the PMFW doesn't reset it when
power gating VPE, the SOC can get stuck with a higher DPM level.
This can happen from amdgpu's ring buffer test because it's a short
quick workload for VPE and VPE is turned off after 1s.
[How]
In idle handler besides checking fences are drained check PMFW version
to determine if it will reset DPM when power gating VPE. If PMFW will
not do this, then check VPE DPM level. If it is not DPM0 reschedule
delayed work again until it is.
v2: squash in return fix (Alex)
Cc: Peyton.Lee@amd.com
Reported-by: Sultan Alsawaf <sultan@kerneltoast.com>
Reviewed-by: Sultan Alsawaf <sultan@kerneltoast.com>
Tested-by: Sultan Alsawaf <sultan@kerneltoast.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4615
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ac635367e)
Cc: stable@vger.kernel.org
A recent change fixed device reference leaks when looking up drm
platform device driver data during bind() but failed to remove a partial
fix which had been added by commit 80805b62ea ("drm/mediatek: Fix
kobject put for component sub-drivers").
This results in a reference imbalance on component bind() failures and
on unbind() which could lead to a user-after-free.
Make sure to only drop the references after retrieving the driver data
by effectively reverting the previous partial fix.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 1f403699c4 ("drm/mediatek: Fix device/node reference count leaks in mtk_drm_get_all_drm_priv")
Reported-by: Sjoerd Simons <sjoerd@collabora.com>
Closes: https://lore.kernel.org/r/20251003-mtk-drm-refcount-v1-1-3b3f2813b0db@collabora.com
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Sjoerd Simons <sjoerd@collabora.com>
Tested-by: Ritesh Raj Sarraf <ritesh.sarraf@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20251006093937.27869-1-johan@kernel.org/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4lRQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylROwCfXKoJX39yhNjPuNdqVLp5wW4+1LsAn3fd7x0E
9czT0dxL2IipOWrV1ZMj
=Gu5v
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small char/misc/android driver fixes for 6.18-rc3 for
reported issues. Included in here are:
- rust binder fixes for reported issues
- mei device id addition
- mei driver fixes
- comedi bugfix
- most usb driver bugfixes
- fastrpc memory leak fix
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
most: usb: hdm_probe: Fix calling put_device() before device initialization
most: usb: Fix use-after-free in hdm_disconnect
binder: remove "invalid inc weak" check
mei: txe: fix initialization order
comedi: fix divide-by-zero in comedi_buf_munge()
mei: late_bind: Fix -Wincompatible-function-pointer-types-strict
misc: fastrpc: Fix dma_buf object leak in fastrpc_map_lookup
mei: me: add wildcat lake P DID
misc: amd-sbi: Clarify that this is a BMC driver
nvmem: rcar-efuse: add missing MODULE_DEVICE_TABLE
binder: Fix missing kernel-doc entries in binder.c
rust_binder: report freeze notification only when fully frozen
rust_binder: don't delete FreezeListener if there are pending duplicates
rust_binder: freeze_notif_done should resend if wrong state
rust_binder: remove warning about orphan mappings
rust_binder: clean `clippy::mem_replace_with_default` warning
Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4l4g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ym2zACgq0WPUJl3X/5+M0sWs9rd4afh2TMAn1RlLJZE
1Qj5OIhSn1v5SfkLyqXf
=Wn6c
-----END PGP SIGNATURE-----
Merge tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for the gpib subsystem to
resolve some reported issues. Included in here are:
- memory leak fixes
- error code fixes
- proper protocol fixes
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: gpib: Fix device reference leak in fmh_gpib driver
staging: gpib: Return -EINTR on device clear
staging: gpib: Fix sending clear and trigger events
staging: gpib: Fix no EOI on 1 and 2 byte writes
Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4mow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykXPACfVp7KKDyM+10AxrV/xccYT53iUaAAoMQEWvES
/0acQXalH6XunybjHkOd
=cBYS
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for reported issues.
Included in here are:
- sh-sci serial driver fixes
- 8250_dw and _mtk driver fixes
- sc16is7xx driver bugfix
- new 8250_exar device ids added
All of these have been in linux-next this past week with no reported
issues"
* tag 'tty-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250_mtk: Enable baud clock and manage in runtime PM
serial: 8250_dw: handle reset control deassert error
dt-bindings: serial: sh-sci: Fix r8a78000 interrupts
serial: sc16is7xx: remove useless enable of enhanced features
serial: 8250_exar: add support for Advantech 2 port card with Device ID 0x0018
tty: serial: sh-sci: fix RSCI FIFO overrun handling
Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaP4nSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yliXgCfZzBRNhHGVV0gQrBy2dz9owzfhLQAoISf3He8
dwzYP7TSYXungxfq9dSL
=NaGG
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB driver fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for 6.18-rc3.
Included in here are:
- new option serial driver device ids added
- dt bindings fixes for numerous platforms
- xhci bugfixes for many reported regressions
- usbio dependency bugfix
- dwc3 driver fix
- raw-gadget bugfix
All of these have been in linux-next this week with no reported issues"
* tag 'usb-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: option: add Telit FN920C04 ECM compositions
USB: serial: option: add Quectel RG255C
tcpm: switch check for role_sw device with fw_node
usb/core/quirks: Add Huawei ME906S to wakeup quirk
usb: raw-gadget: do not limit transfer length
USB: serial: option: add UNISOC UIS7720
xhci: dbc: enable back DbC in resume if it was enabled before suspend
xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event
usb: xhci-pci: Fix USB2-only root hub registration
dt-bindings: usb: qcom,snps-dwc3: Fix bindings for X1E80100
usb: misc: Add x86 dependency for Intel USBIO driver
dt-bindings: usb: switch: split out ports definition
usb: dwc3: Don't call clk_bulk_disable_unprepare() twice
dt-bindings: usb: dwc3-imx8mp: dma-range is required only for imx8mp
a Clang build
- Make sure a Retbleed mitigation message is printed only when necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256 check is
needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which supports
assignable counters but where L3 total and local bandwidth monitoring has
been disabled at boot
-----BEGIN PGP SIGNATURE-----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=EZGc
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Remove dead code leftovers after a recent mitigations cleanup which
fail a Clang build
- Make sure a Retbleed mitigation message is printed only when
necessary
- Correct the last Zen1 microcode revision for which Entrysign sha256
check is needed
- Fix a NULL ptr deref when mounting the resctrl fs on a system which
supports assignable counters but where L3 total and local bandwidth
monitoring has been disabled at boot
* tag 'x86_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Remove dead code which might prevent from building
x86/bugs: Qualify RETBLEED_INTEL_MSG
x86/microcode: Fix Entrysign revision check for Zen1/Naples
x86,fs/resctrl: Fix NULL pointer dereference with events force-disabled in mbm_event mode
subsystem after a rework
-----BEGIN PGP SIGNATURE-----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=oIwu
-----END PGP SIGNATURE-----
Merge tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Restore the original buslock locking in a couple of places in the irq
core subsystem after a rework
* tag 'irq_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/manage: Add buslock back in to enable_irq()
genirq/manage: Add buslock back in to __disable_irq_nosync()
genirq/chip: Add buslock back in to irq_set_handler()
- Add one more Rust noreturn function to objtool's list
-----BEGIN PGP SIGNATURE-----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=d4ht
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Borislav Petkov:
- Fix x32 build due to wrong format specifier on that sub-arch
- Add one more Rust noreturn function to objtool's list
* tag 'objtool_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix failure when being compiled on x32 system
objtool/rust: add one more `noreturn` Rust function
throttled otherwise task movement and manipulation would lead to dangling
cfs_rq references and an eventual crash
-----BEGIN PGP SIGNATURE-----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=8MbE
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Borislav Petkov:
- Make sure a CFS runqueue on a throttled hierarchy has its PELT clock
throttled otherwise task movement and manipulation would lead to
dangling cfs_rq references and an eventual crash
* tag 'sched_urgent_for_v6.18_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Start a cfs_rq on throttled hierarchy with PELT clock throttled
- In Device::parent(), do not make any assumptions on the device
context of the parent device.
- Check visibility before changing ownership of a sysfs attribute
group.
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL().
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs.
- Do not warn about a pending fw_devlink sync state.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaPyrfAAKCRBFlHeO1qrK
LoXVAP9tGeaWsoQgYUSBDZAGysWqwzar0xl27IOe40Mgg6xWDgEAmzPHt6KeQS7d
XhwHeFVRyQ8e04tPSlhI7qSLdeLLiwo=
=ID4F
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- In Device::parent(), do not make any assumptions on the device
context of the parent device
- Check visibility before changing ownership of a sysfs attribute
group
- In topology_parse_cpu_capacity(), replace an incorrect usage of
PTR_ERR_OR_ZERO() with IS_ERR_OR_NULL()
- In devcoredump, fix a circular locking dependency between
struct devcd_entry::mutex and kernfs
- Do not warn about a pending fw_devlink sync state
* tag 'driver-core-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
arch_topology: Fix incorrect error check in topology_parse_cpu_capacity()
rust: device: fix device context of Device::parent()
sysfs: check visibility before changing group attribute ownership
devcoredump: Fix circular locking dependency with devcd->mutex.
driver core: fw_devlink: Don't warn about sync_state() pending
A small collection of FireWire fixes. This includes collections to sparse
and API documentation.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaPyn7gAKCRCsLtaWM8Lw
E1n9AQDZQBuY7/WiMS6GoIfCpyqwnpLG7xaMIofoLzrBD2DR/AD+PD683h4bjO5P
Th4pjtrlUtgmnvchmtCzZYaQUvMbAwk=
=IipF
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fixes from Takashi Sakamoto:
"A small collection of FireWire fixes. This includes corrections to
sparse and API documentation"
* tag 'firewire-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: init_ohci1394_dma: add missing function parameter documentation
firewire: core: fix __must_hold() annotation
Since the vm is lazily created, to allow userspace to opt-in to a
VM_BIND context, we can't assume it is already created.
Fixes: 2e6a8a1fe2 ("drm/msm: Add VM_BIND ioctl")
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/682939/
Message-ID: <20251022222039.9937-1-robin.clark@oss.qualcomm.com>
We need PRR support in order to implement MAP_NULL. Userspace shouldn't
be trying to use this if it is unsupported.
Reported-by: Valentine Burley <valentine.burley@collabora.com>
Link: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/37935#note_3153730
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Valentine Burley <valentine.burley@collabora.com>
Patchwork: https://patchwork.freedesktop.org/patch/682941/
Message-ID: <20251022222051.10030-1-robin.clark@oss.qualcomm.com>
Several RISC-V fixes for v6.18-rc3:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant macro
-----BEGIN PGP SIGNATURE-----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=g9cN
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Close a race during boot between userspace vDSO usage and some
late-initialized vDSO data
- Improve performance on systems with non-CPU-cache-coherent
DMA-capable peripherals by enabling write combining on
pgprot_dmacoherent() allocations
- Add human-readable detail for RISC-V IPI tracing
- Provide more information to zsmalloc on 64-bit RISC-V to improve
allocation
- Silence useless boot messages about CPUs that have been disabled in
DT
- Resolve some compiler and smatch warnings and remove a redundant
macro
* tag 'riscv-for-linus-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: hwprobe: avoid uninitialized variable use in hwprobe_arch_id()
riscv: cpufeature: avoid uninitialized variable in has_thead_homogeneous_vlenb()
riscv: hwprobe: Fix stale vDSO data for late-initialized keys at boot
riscv: add a forward declaration for cpuinfo_op
RISC-V: Don't print details of CPUs disabled in DT
riscv: Remove the PER_CPU_OFFSET_SHIFT macro
riscv: mm: Define MAX_POSSIBLE_PHYSMEM_BITS for zsmalloc
riscv: Register IPI IRQs with unique names
ACPI: RIMT: Fix unused function warnings when CONFIG_IOMMU_API is disabled
RISC-V: Define pgprot_dmacoherent() for non-coherent devices
Signed-off-by: Carlos Maiolino <cem@kernel.org>
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQSmtYVZ/MfVMGUq1GNcsMJ8RxYuYwUCaPyVuAAKCRBcsMJ8RxYu
Y7ctAYDUsUnEuqhD2kvGhED6GXXUv1Ibl6vliCqBUbTkaKpXAq1QJrJBYrpwiAh+
AVQyUoQBgNDi6zY1Ej85luZQEQCpTz6e9Z81Kwq5tBiCQz512SdmtluuzLJhkIt1
BCbAS69DMg==
=z2aZ
-----END PGP SIGNATURE-----
Merge tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Carlos Maiolino:
"The main highlight here is a fix for a bug brought in by the removal
of attr2 mount option, where some installations might actually have
'attr2' explicitly configured in fstab preventing system to boot by
not being able to remount the rootfs as RW.
Besides that there are a couple fix to the zonefs implementation,
changing XFS_ONLINE_SCRUB_STATS to depend on DEBUG_FS (was select
before), and some other minor changes"
* tag 'xfs-fixes-6.18-rc3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: fix locking in xchk_nlinks_collect_dir
xfs: loudly complain about defunct mount options
xfs: always warn about deprecated mount options
xfs: don't set bt_nr_sectors to a negative number
xfs: don't use __GFP_NOFAIL in xfs_init_fs_context
xfs: cache open zone in inode->i_private
xfs: avoid busy loops in GCD
xfs: XFS_ONLINE_SCRUB_STATS should depend on DEBUG_FS
xfs: do not tightly pack-write large files
xfs: Improve CONFIG_XFS_RT Kconfig help
-----BEGIN PGP SIGNATURE-----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=6x96
-----END PGP SIGNATURE-----
Merge tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"smbdirect (RDMA) fixes in order avoid potential submission queue
overflows:
- free transport teardown fix
- credit related fixes (five server related, one client related)"
* tag 'v6.18-rc2-smb-server-fixes' of git://git.samba.org/ksmbd:
smb: server: let free_transport() wait for SMBDIRECT_SOCKET_DISCONNECTED
smb: client: make use of smbdirect_socket.send_io.lcredits.*
smb: server: make use of smbdirect_socket.send_io.lcredits.*
smb: server: simplify sibling_list handling in smb_direct_flush_send_list/send_done
smb: server: smb_direct_disconnect_rdma_connection() already wakes all waiters on error
smb: smbdirect: introduce smbdirect_socket.send_io.lcredits.*
smb: server: allocate enough space for RW WRs and ib_drain_qp()
Clang is not happy with set but unused variable (this is visible
with `make W=1` build:
kernel/sched/sched.h:3744:18: error: variable 'cpumask' set but not used [-Werror,-Wunused-but-set-variable]
It seems like the variable was never used along with the assignment
that does not have side effects as far as I can see. Remove those
altogether.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- drm_panic: bunch of size calculation fixes
- pantor: fix kernel panic on partial gpu va unmap
- rockchip: hdmi hotplug setup fix
- amdgpu: dp mst, dc/display fixes
- i915: fix panic structure leak
- xe: madvise uapi fix, wq alloc error, vma flag handling fix
-----BEGIN PGP SIGNATURE-----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=EjON
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Simona Vetter:
"Very quiet, all just small stuff and nothing scary pending to my
knowledge:
- drm_panic: bunch of size calculation fixes
- pantor: fix kernel panic on partial gpu va unmap
- rockchip: hdmi hotplug setup fix
- amdgpu: dp mst, dc/display fixes
- i915: fix panic structure leak
- xe: madvise uapi fix, wq alloc error, vma flag handling fix"
* tag 'drm-fixes-2025-10-24' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe: Check return value of GGTT workqueue allocation
drm/amd/display: use GFP_NOWAIT for allocation in interrupt handler
drm/amd/display: increase max link count and fix link->enc NULL pointer access
drm/amd/display: Fix NULL pointer dereference
drm/panic: Fix 24bit pixel crossing page boundaries
drm/panic: Fix divide by 0 if the screen width < font width
drm/panic: Fix kmsg text drawing rectangle
drm/panic: Fix qr_code, ensure vmargin is positive
drm/panic: Fix overlap between qr code and logo
drm/panic: Fix drawing the logo on a small narrow screen
drm/xe/uapi: Hide the madvise autoreset behind a VM_BIND flag
drm/xe: Retain vma flags when recreating and splitting vmas for madvise
drm/i915/panic: fix panic structure allocation memory leak
drm/panthor: Fix kernel panic on partial unmap of a GPU VA region
drm/rockchip: dw_hdmi: use correct SCLIN mask for RK3228
-----BEGIN PGP SIGNATURE-----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=UcX7
-----END PGP SIGNATURE-----
Merge tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fixes from Bjorn Helgaas:
- Add DWC custom pci_ops for the root bus instead of overwriting the
DBI base address, which broke drivers that rely on the DBI address
for iATU programming; fixes an FU740 probe regression (Krishna
Chaitanya Chundru)
- Revert qcom ECAM enablement, which is rendered unnecessary by the DWC
custom pci_ops (Krishna Chaitanya Chundru)
- Fix longstanding MIPS Malta resource registration issues to avoid
exposing them when the next commit fixes the boot failure (Maciej W.
Rozycki)
- Use pcibios_align_resource() on MIPS Malta to fix boot failure caused
by using the generic pci_enable_resources() (Ilpo Järvinen)
- Enable only ASPM L0s and L1, not L1 PM Substates, for devicetree
platforms because we lack information required to configure L1
Substates; fixes regressions on powerpc and rockchip. A qcom
regression (L1 Substates no longer enabled) remains and will be
addressed next (Bjorn Helgaas)
* tag 'pci-v6.18-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/ASPM: Enable only L0s and L1 for devicetree platforms
MIPS: Malta: Use pcibios_align_resource() to block io range
MIPS: Malta: Fix PCI southbridge legacy resource reservations
MIPS: Malta: Fix keyboard resource preventing i8042 driver from registering
Revert "PCI: qcom: Prepare for the DWC ECAM enablement"
PCI: dwc: Use custom pci_ops for root bus DBI vs ECAM config access
Add missing kernel-doc parameter descriptions for five functions
in init_ohci1394_dma.c to fix documentation warnings when building
with W=1.
This patch addresses the following warnings:
- init_ohci1394_wait_for_busresets: missing @ohci description
- init_ohci1394_enable_physical_dma: missing @ohci description
- init_ohci1394_reset_and_init_dma: missing @ohci description
- init_ohci1394_controller: missing @num, @slot, @func descriptions
- setup_ohci1394_dma: missing @opt description
Tested with GCC 13.2.0 and W=1 flag. All documentation warnings
for these functions have been resolved.
Signed-off-by: Nirbhay Sharma <nirbhay.lkd@gmail.com>
Link: https://lore.kernel.org/r/20251024203219.101990-2-nirbhay.lkd@gmail.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Avoid some false-positive KMSAN warnings by restoring the dependency of
the architecture-optimized Poly1305 code on !KMSAN.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQSacvsUNc7UX4ntmEPzXCl4vpKOKwUCaPvOAhQcZWJpZ2dlcnNA
a2VybmVsLm9yZwAKCRDzXCl4vpKOK9HxAQDpK0Js70YuHIbtRJIiLJSD13uYqc5z
UbHWSve7c6nIkwD+IVNcHZ04t4iiYCf1v7txPQa/vrJP3RpvrFIeSvSs5A8=
=f+r4
-----END PGP SIGNATURE-----
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library fix from Eric Biggers:
"Avoid some false-positive KMSAN warnings by restoring the dependency
of the architecture-optimized Poly1305 code on !KMSAN"
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crypto: poly1305: Restore dependency of arch code on !KMSAN
-----BEGIN PGP SIGNATURE-----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=AS5A
-----END PGP SIGNATURE-----
Merge tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- add missing tracepoints
- smbdirect (RDMA) fix
- fix potential issue with credits underflow
- rename fix
- improvement to calc_signature and additional cleanup patch
* tag '6.18-rc2-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: #include cifsglob.h before trace.h to allow structs in tracepoints
cifs: Call the calc_signature functions directly
smb: client: get rid of d_drop() in cifs_do_rename()
cifs: Fix TCP_Server_Info::credits to be signed
cifs: Add a couple of missing smb3_rw_credits tracepoints
smb: client: allocate enough space for MR WRs and ib_drain_qp()
-----BEGIN PGP SIGNATURE-----
iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmj62psQHGF4Ym9lQGtl
cm5lbC5kawAKCRD301j7KXHgpjMiD/0cTxemB2tYk5Nd1QIAda8cwO0fn1jLgamH
tjQfy0uq4kxzSY4QWWx8HkA8sEybAOpAwP2u+F3RN/CsW3//TMA+H8JGW1h0k5OG
dh+0asF0iru9euyAePTLUExOw2V3VgEajjvt/2ezkjussNki6vcXBoIzGfeZKQ5E
MSx6LTbnpzAy+SUydYFpLFtFcokXzUyp/TKZY+QgsIzsqo/ReUm3Caa/KbxQBPQm
7MhpUpnTdI1PjYZZE/Y/p4iWtesCSpiSOayYKhtBQX4FzMo12MZw5nRkJkliLUvm
EtPuSYBSCQEKnYVlfCqLuVd8r7drgMgwZOmNhOsdtUHLigtkPolxQOqQKniX3u70
ycMqn3b1BdEFSqVe/eXhIRZ3YCL3xEAJUYTBRvwbf7XVC804F8VV+CqAey835A4D
IIcIh8vYrkw0HD5HP3aILKlWPHilArDqjcuU260Qd9i79EV7zVRUJrySc0mZ9zK9
XVKX0csETx1SrdH9vRlwBaeJzQyF9J18fuYMD7JV1dK0FhkEX6+pF5dY5rE6S+0r
/tjZgEwSS4siQYhsOM+q3J/ZoLMP2RmW10rYYcKiS9NrqYm1b5VNenBVm7bX6SQO
P29JtDJG374ygPiFn7opMbY79LDJ8JNS5g+vq0en8HtEGwtWuFM3vVCYyerPkiCl
IgVxWd/xYQ==
=Zqjz
-----END PGP SIGNATURE-----
Merge tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block fixes from Jens Axboe:
- Fix dma alignment for PI
- Fix selinux bogosity with nbd, where sendmsg would get rejected
* tag 'block-6.18-20251023' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
block: require LBA dma_alignment when using PI
nbd: override creds to kernel when calling sock_{send,recv}msg()
