The underlying functions already return error pointers, so checking for
NULL with IS_ERR_OR_NULL() is redundant. Use IS_ERR() instead.
This affects:
- nvkm_gsp_rm_alloc_get()
- nvkm_gsp_rm_alloc()
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260528062451.54107-2-zenghongling@kylinos.cn
Reviewed-by: Lyude Paul <lyude@redhat.com>
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
Update tegra_bo_iommu_map() to correctly check for errors from
iommu_map_sgtable.
Fixes: ad8f36e4b6 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421-iommu_map_sgtable-return-v1-2-fb484c07d2a1@nvidia.com
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
pin_job() also was incorrectly assigning to 'int', which could cause
overflows into negative values.
Update pin_job() to correctly check for errors from iommu_map_sgtable.
Fixes: ad8f36e4b6 ("iommu: return full error code from iommu_map_sg[_atomic]()")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421-iommu_map_sgtable-return-v1-1-fb484c07d2a1@nvidia.com
The drivers/gpu/host1x/context_bus.c does not include any declaration of
host1x_context_device_bus_type, and after including "context.h" it also
showed that there are two definitions in the kernel because the extern
declaration was missing the const qualifier.
Include linux/host1x_context_bus.h and drop the wrong declaration from
context.h. While at it, also predeclare struct host1x_memory_context.
Fixes the following sparse warning:
drivers/gpu/host1x/context_bus.c:9:23: warning: symbol 'host1x_context_device_bus_type' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[treding@nvidia.com: minor fixups, reword commit message to reflect changes]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260123140512.609167-1-ben.dooks@codethink.co.uk
The of_for_each_phandle() macro increments the reference count of the
device node it iterates over. If the loop exits early, the reference must
be released manually.
In tegra_dc_has_output(), the function returns true immediately when a
match is found, failing to release the current node's reference.
Fix this by adding a call to of_node_put() before returning from the loop.
Fixes: c57997bce4 ("drm/tegra: sor: Add Tegra186 support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260128-dc-v1-1-a88205826301@gmail.com
Without the cmu, nvdisplay will display colors that are notably darker
than intended. The vendor bootloader and the downstream display driver
enable the cmu and sets a sRGB table. Loading that table here results in
the intended colors.
Co-developed-by: Kurt Kiefer <kekiefer@gmail.com>
Signed-off-by: Kurt Kiefer <kekiefer@gmail.com>
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Tested-by: Jasper Korten <jja2000@gmail.com>
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com> # Jetson AGX Xavier
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260407-tegra-drm-cmu-v4-1-2fe95f305afd@gmail.com
After device_initialize(), the embedded struct device in struct
host1x_device should be released through the device core with
put_device().
In host1x_device_add(), if host1x_device_parse_dt() fails, the current
error path frees the object directly with kfree(device). That bypasses
the normal device lifetime handling and leaks the reference held on the
embedded struct device.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
Fix this by using put_device() in the host1x_device_parse_dt() failure
path.
Fixes: f4c5cf88fb ("gpu: host1x: Provide a proper struct bus_type")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260413141526.2961841-1-lgs201920130244@gmail.com
In tegra_mipi_request(), when provider.np is not equal with args.np, it
returns without calling of_node_put(args.np), causing a reference leak.
Convert to use the existing goto out pattern to ensure proper cleanup.
Fixes: 767598d447 ("gpu: host1x: mipi: Update tegra_mipi_request() to be node based")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260416-mipi-v1-1-9c027175abdf@gmail.com
Fbdev framebuffer allocation now goes through the regular ioctl call
chain. This makes tegra_fb_alloc() an internal helper function. Declare
it as static.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-6-tzimmermann@suse.de
Replace the internal DRM framebuffer with a DRM client buffer. The
client buffer allocates the DRM framebuffer on a file and also uses
GEM object handles via the regular ADDFB2 interfaces.
Using client-buffer interfaces unifies framebuffer allocation for
DRM clients in user space and tegra's internal fbdev emulation. It
also simplifies the clean-up side of the fbdev emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-5-tzimmermann@suse.de
Replace the geometry and size calculation in tegra's fbdev emulation
with DRM format helpers. This consists of a 4CC lookup from the fbdev
parameters, format lookup, pitch calculation and size calculation.
Then allocate the GEM buffer object for the framebuffer memory from
the calculated size.
Set up mode_cmd with the calculated values just before allocating the
framebuffer. This code will later be replaced with a DRM client buffer.
Set framebuffer size fields in struct fb_info from the size stored in
the GEM buffer object instead of what has been requested. The requested
size is an estimate, while the buffer size is the exact value rounded
to the correct alignment.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-4-tzimmermann@suse.de
The screen_buffer field in struct fb_info contains the kernel address
of the first byte of framebuffer memory. Do not add the display offset.
This offset only describes scrolling during scanout.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: de2ba664c3 ("gpu: host1x: drm: Add memory manager and fb")
Cc: dri-devel@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260421073646.144712-3-tzimmermann@suse.de
Add 2 struct member descriptions and convert #define macro constants
comments to kernel-doc comments to eliminate all kernel-doc warnings:
Warning: include/uapi/drm/tegra_drm.h:353 struct member 'cmdbuf' not
described in 'drm_tegra_reloc'
Warning: include/uapi/drm/tegra_drm.h:353 struct member 'target' not
described in 'drm_tegra_reloc'
Warning: include/uapi/drm/tegra_drm.h:780 This comment starts with '/**',
but isn't a kernel-doc comment.
* Specify that bit 39 of the patched-in address should be set to switch
Warning: include/uapi/drm/tegra_drm.h:832 This comment starts with '/**',
but isn't a kernel-doc comment.
* Execute `words` words of Host1x opcodes specified in the
`gather_data_ptr`
Warning: include/uapi/drm/tegra_drm.h:837 This comment starts with '/**',
but isn't a kernel-doc comment.
* Wait for a syncpoint to reach a value before continuing with further
Warning: include/uapi/drm/tegra_drm.h:842 This comment starts with '/**',
but isn't a kernel-doc comment.
* Wait for a syncpoint to reach a value before continuing with further
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260427184454.693794-1-rdunlap@infradead.org
Use correct kernel-doc format and add missing nested struct entries to
eliminate kernel-doc warnings:
Warning: drivers/gpu/drm/tegra/dp.h:28 Incorrect use of kernel-doc format:
* tps3_supported:
Warning: drivers/gpu/drm/tegra/dp.h:54 struct member 'tps3_supported'
not described in 'drm_dp_link_caps'
dp.h:73: warning: Function parameter or struct member 'apply_training'
not described in 'drm_dp_link_ops'
dp.h:73: warning: Function parameter or struct member 'configure'
not described in 'drm_dp_link_ops'
dp.h:160: warning: Excess struct member 'cr' description in 'drm_dp_link'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260427184442.693768-1-rdunlap@infradead.org
In host1x_device_init(), the error teardown paths do not check
client->ops before dereferencing it, unlike the forward init paths
which correctly guard with 'client->ops &&'. This can result in a
NULL pointer dereference if client->ops is NULL.
Fix by adding the missing client->ops check in both the teardown
and teardown_late labels.
Signed-off-by: shayderrr <darknessshayder@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260517170456.84927-1-darknessshayder@gmail.com
Remove the deprecated trivial helper drm_simple_encoder_init(). Inline
the call to drm_encoder_init and add instance of
drm_encoder_funcs.
Signed-off-by: Jacob McLemore <jmclemore.lkml@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260523012824.81043-1-jmclemore.lkml@gmail.com
The helper drm_simple_encoder_init() is a trivial wrapper around
drm_encoder_init() that only provides a static drm_encoder_funcs with
.destroy set to drm_encoder_cleanup(). Open-code the initialization
with a driver-specific instance of drm_encoder_funcs and remove the
dependency on drm_simple_kms_helper.
Suggested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Souradipto Das <souradiptodas6@gmail.com>
[treding@nvidia.com: fix issues flagged by checkpatch]
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260513100501.6468-1-souradiptodas6@gmail.com
When the fence list is empty, host1x_intr_update_hw_state()
falls through to host1x_intr_disable_syncpt_intr()
which does two MMIO writes to disable the syncpoint
interrupt and clear its status.
The ISR has already disabled and acked the interrupt
before calling host1x_intr_handle_interrupt(), making
these two writes redundant. Skip the update_hw_state()
call if no fences remain.
Measured Syncpoint wait latency (50000 samples):
Average latency: 10.6 us -> 9.4 us
99.99 pct latency: 51.90 us -> 36.58 us
Signed-off-by: Tanmay Patil <tanmayp@nvidia.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260514103153.766343-3-tanmayp@nvidia.com
In host1x_syncpt_wait(), the hardware syncpoint value was loaded
initially for expiry check, and then loaded a second time to
populate the caller's value pointer. Reuse a single load for
both purposes.
After dma_fence_wait_timeout(), the previous code reloaded the syncpoint
value for the expiry check, which is only required in the timeout case.
On success (i.e., return value > 0, or return value == 0 with zero
jiffies remaining), the ISR has already cached the value before
signaling the fence. The value pointer can therefore be populated using
the cached value using host1x_syncpt_read_min() without MMIO access.
Only the timeout path requires a fresh load, move host1x_syncpt_load()
under that path.
Measured Syncpoint wait latency (50000 samples):
Average latency: 12.2 us -> 10.6 us
99.99 pct latency: 62.96 us -> 51.90 us
Signed-off-by: Tanmay Patil <tanmayp@nvidia.com>
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260514103153.766343-2-tanmayp@nvidia.com
When a buffer object is pinned via host1x_bo_pin() with a cache, the
resulting mapping is kept in the cache so it can be reused on subsequent
pins. Each mapping held a reference to the underlying host1x_bo (taken
in tegra_bo_pin / gather_bo_pin), so as long as a mapping was cached,
the bo itself could not be freed.
However, the only way to remove the cached mapping was through the free
path of the buffer object. This meant that if a bo got cached, it could
never get freed again.
Resolve the circularity by holding a weak reference to the bo from the
cache side. This is done by having the .pin callbacks not bump the bo's
refcount -- instead the common Host1x bo code does so, except for the
cache reference.
Also move the remove-cache-mapping-on-free code into a common function
inside Host1x code. This is only called from the TegraDRM GEM buffers
since those are the only ones that can be cached at the moment.
Reported-by: Aaron Kling <webgeek1234@gmail.com>
Fixes: 1f39b1dfa5 ("drm/tegra: Implement buffer object cache")
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260515-host1x-bocache-leak-v1-1-a0375f68aeab@nvidia.com
The current power management configuration causes GR2G/GR3D to malfunction
after resume. Reconfigure all PM actions to be handled within the GR*D
probe and remove operations to address this.
Fixes: 62fa0a985e ("drm/tegra: Enable runtime PM during probe")
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260517091450.46728-3-clamor95@gmail.com
The host1x_client_register() function is called just prior to register map
initialization loop, making the device available to userspace. This may
result in userspace attempting to submits a job before the register map is
initialized. Address this by moving register initialization before host1x
client registration.
Acked-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260517091450.46728-2-clamor95@gmail.com
Use __assign_str and __get_str as required by tracing subsystem. Fixes
string fields being rejected by the verifier and unreadable from
userspace.
Tested on v6.18.21.
Signed-off-by: Artur Kowalski <arturkow2000@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260519-host1x-tracing-v1-1-55afb8cbd186@gmail.com
Replace the manual ternary "s" pluralizations with str_plural() to
simplify the code. This also corrects the "0 lanes" case.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260521194658.366737-3-thorsten.blum@linux.dev
The "gems" debugfs file is getting a little too wide for comfort. While
a lot of this is unavoidable due to the theoretical upper limits of
numbers here (e.g. size needs to be 16 chars because 2**48-1 in decimal
is 15 digits, plus one space for separation), the refcount column has a
decent 5 characters to be saved, as it can only ever contain a 10-digit
decimal number.
Reduce the refcount column's width to 11, which fulfils this requirement
with an additional space for separation.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260521-panthor-bo-reclaim-observability-v5-2-49313994da55@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
For fdinfo to be able to fill its evicted counter with data, panthor
needs to keep track of whether a GEM object has ever been reclaimed.
Just checking whether the pages are resident isn't enough, as newly
allocated objects also won't be resident.
Do this with a new atomic_t member on panthor_gem_object. It's increased
when an object gets evicted by the shrinker, and saturates at INT_MAX.
This means that once an object has been evicted at least once, its
reclaim counter will never return to 0.
Due to this, it's possible to distinguish evicted non-resident pages
from newly allocated non-resident pages by checking whether
reclaimed_count is != 0
Also add a new column and status flag to the panthor gems debugfs: the
column is the number of times an object has been evicted, whereas the
flag indicates whether it currently is evicted.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260521-panthor-bo-reclaim-observability-v5-1-49313994da55@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Backmerging to get GEM LRU fixes from commit 379e8f1c ("drm/gem: Make
the GEM LRU lock part of drm_device") and other updates from v7.1-rc5.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmoTZAYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGKZ0H/A8Ti79DXqEl4M6V
S1ZYfteuvyWCdygPfY7+CQsxS1EjfmeRXd0213n95jijUoXvAVe7HJ5FuroTltsF
LYqH3CAedeEWMO1rIZjuDs5J1BzWAh7b0/QoanTlAjI1ZL8c3Btj/o//PoQfztiS
HWlN/aCcsZTi9n0ewV9eQM9jdiuhBlpZujfDX90vYurxAB+3K2c1b0UN+Y4/zMXO
83zaDLMYhIh8cEaU52+23H9UpyfrT0B8n6YgqbU4ZBRIbgA1BC4gloT6B7OHFKfq
PAfjAOBfpe43K8lLUyfbkfNohNblLOboiMmekdf+j2y4wqpCO64o6WigCrZtxtHe
9znkJpM=
=H+I9
-----END PGP SIGNATURE-----
Merge v7.1-rc5 into drm-next
Boris Brezillion needs the gem lru fixes 379e8f1ca5 ("drm/gem: Make
the GEM LRU lock part of drm_device") backmerged for drm-misc-next.
That also means we need to sort out the rename conflict in panthor with
the fixup patch from Boris from drm-tip.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
The exynos_gem->base.size argument is a size_t rather than an
unsigned long, so adapt the printk() format string accordingly:
In file included from drivers/gpu/drm/exynos/exynos_drm_gem.c:16:
drivers/gpu/drm/exynos/exynos_drm_gem.c: In function 'exynos_drm_alloc_buf':
drivers/gpu/drm/exynos/exynos_drm_gem.c:69:49: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'size_t' {aka 'unsigned int'} [-Werror=format=]
69 | DRM_DEV_DEBUG_KMS(drm_dev_dma_dev(dev), "dma_addr(0x%lx), size(0x%lx)\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
70 | (unsigned long)exynos_gem->dma_addr, exynos_gem->base.size);
| ~~~~~~~~~~~~~~~~~~~~~
| |
| size_t {aka unsigned int}
The dma_addr in the same line is already printed using a cast
to unsigned long, so change that similarly to use the correct
%pad format.
Fixes: 11e898373f ("drm/exynos: Drop exynos_drm_gem.size field")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patch.msgid.link/20260527194525.45762-1-arnd@kernel.org
All published NPU firmware versions support D0i3 delayed entry
flow, making this workaround obsolete. It was originally added as
a safety measure for potential firmware bugs.
Recent firmware dropped legacy D0i3 entry support, so the workaround
can't be used anyway. Hardcode d0i3_delayed_entry boot param to 1 to
ensure older firmware works in the correct mode.
No functional changes, just dead code cleanup.
Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com>
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Link: https://patch.msgid.link/20260526125521.594479-1-andrzej.kacprowski@linux.intel.com
The ASUS DC301 USB-C dock containing a Realtek MST branch device
supports the DSC decompression functionality on each of the dock's
downstream connectors, even though there is no discoverable peer-to-peer
virtual device in the MST topology (which the DP Standard
requires/suggests to control the DSC functionality on a per-DFP basis).
Add the DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD quirk for this branch
device as well to enable the DSC decompression functionality on all DFP
connectors of the dock, similarly to how this is done for dock's
containing older Synaptics branch devices.
Cc: Lyude Paul <lyude@redhat.com>
Reported-and-tested-by: Shawn C Lee <shawn.c.lee@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260525125516.2794636-1-imre.deak@intel.com
Use the correct kernel-doc notation for struct members to eliminate
kernel-doc warnings:
Warning: drivers/gpu/drm/drm_panel.c:119 function parameter 'dev'
not described in 'devm_drm_panel_add'
Warning: drivers/gpu/drm/drm_panel.c:119 function parameter 'dev'
not described in 'devm_drm_panel_add'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202605210648.RI4ufD66-lkp@intel.com/
Signed-off-by: Dongyang Jin <jindongyang@kylinos.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260521094545.3039207-1-jindongyang@kylinos.cn
Add dt-bindings for 10.1" TFT LCD module from Ampire Co. Ltd.
as part of panel-simple.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260515082232.1766586-1-dario.binacchi@amarulasolutions.com
The driver unconditionally sets the transmission mode to HDMI, which
leads to display output not working with DVI monitors. Check the
connector's display information sink type to identify the correct mode
to configure the bridge.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260523-it66121-fix-dvi-mode-v5-v5-3-33b4468162f9@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Move the existing .mode_set logic to the .atomic_enable callback. The
former is deprecated and drivers are supposed to use the latter instead.
Also, drop the struct it66121_ctx.connector field because the connector
can be accessed through the atomic state and there is no need to store
it anymore.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260523-it66121-fix-dvi-mode-v5-v5-2-33b4468162f9@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Instead of open coding the HDMI AVI Infoframes buffer management, use the
helpers provided by the HDMI connector framework.
Also, add callbacks to implement HDMI Vendor Specific Infoframe and Audio
InfoFrame support. The driver was not sending these before, but they are
required when using the HDMI helpers.
These were implemented following the IT66121 Programming Guide.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260523-it66121-fix-dvi-mode-v5-v5-1-33b4468162f9@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The cursor plane patch was stalled for a too long time that the
struct drm_atomic_state parameter of atomic modeset hooks has been
changed to struct drm_atomic_commit.
Fix this by replacing the parameter's type. All helpers that retrieve
information from this struct are also changed so simply replacing the
type works.
Fixes: 8c4ae21891 ("drm: verisilicon: add support for cursor planes")
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260525153618.1336239-1-zhengxingda@iscas.ac.cn
- Move fbdev emulation to DRM client buffers
. Reuses standard ADDFB2/GEM paths and simplifies cleanup.
- Use DRM format helpers for geometry and size
. Applies 4CC-based format/pitch/size calculation with stronger checks and PAGE_SIZE alignment.
. Sets screen_size and fix.smem_len from actual allocated size.
Exynos DRM internal cleanup
- Adopt DRM core DMA tracking and drop redundant code
. Removes private DMA tracking, exynos_drm_gem_prime_import(), and obsolete iommu_dma_init_domain() stub.
- Reduce duplication and tighten local scope
. Replaces MAX_FB_BUFFER with DRM_FORMAT_MAX_PLANES.
. Drops redundant exynos_drm_gem.size and internalizes local-only helpers.
Bug fix for Exynos fbdev behavior
- Fix screen_buffer offset handling
. Keeps screen_buffer at framebuffer base and avoids applying scanout offset.
. Includes Fixes and stable Cc for backporting.
-----BEGIN PGP SIGNATURE-----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=sUUs
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
New feature and cleanup for Exynos fbdev
- Move fbdev emulation to DRM client buffers
. Reuses standard ADDFB2/GEM paths and simplifies cleanup.
- Use DRM format helpers for geometry and size
. Applies 4CC-based format/pitch/size calculation with stronger checks and PAGE_SIZE alignment.
. Sets screen_size and fix.smem_len from actual allocated size.
Exynos DRM internal cleanup
- Adopt DRM core DMA tracking and drop redundant code
. Removes private DMA tracking, exynos_drm_gem_prime_import(), and obsolete iommu_dma_init_domain() stub.
- Reduce duplication and tighten local scope
. Replaces MAX_FB_BUFFER with DRM_FORMAT_MAX_PLANES.
. Drops redundant exynos_drm_gem.size and internalizes local-only helpers.
Bug fix for Exynos fbdev behavior
- Fix screen_buffer offset handling
. Keeps screen_buffer at framebuffer base and avoids applying scanout offset.
. Includes Fixes and stable Cc for backporting.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patch.msgid.link/20260521143624.56906-1-inki.dae@samsung.com
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Add VIRTIO_GPU_F_BLOB_ALIGNMENT flag.
Cross-subsystem Changes:
- Add common TMDS character rate constants to video/hdmi and use those
in bridge drivers.
Core Changes:
- Fix leak in drm_syncobj_find_fence.
- Fix OOB reads related to DP-MST.
- Create drm_get_bridge_by_endpoint and convert drivers to use it in
preparation of hotplug.
Driver Changes:
- Assorted bugfixes and cleanups to accel/ethosu, imagination, virtio,
rockchip.
- Expandable device heap support to amdxdna, bridge/chipone-icn6211.
- Add Surface Pro 12 panels.
- Convert ite-it6211 to use drm hdmi audio helpers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f4034e3c-8290-49e1-9410-dc1f449265f4@linux.intel.com
Drivers were accessing this drm_exec member directly.
While that may seem harmless, it will require action if
the drm_exec utility is made a subclass of a dma-resv transaction
utility as outlined in the cover-letter.
Provide an accessor, drm_exec_ticket() to avoid that.
v2:
- Fix amdgpu compile error (Intel CI)
- Update the commit message.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-5-thomas.hellstrom@linux.intel.com
The xe driver was using the drm_exec retry pointer directly to
restart the locking loop after out-of-memory errors. This is
relying on undocumented behaviour.
Instead add a drm_exec_retry() macro that can be used in this
situation, and that also warns if the struct drm_exec is
not newly (re-)initialized.
Use that macro in xe.
v2:
- Only allow if the drm_exec context is newly initialized.
(Christian)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-4-thomas.hellstrom@linux.intel.com
Use __UNIQUE_ID as done elsewhere in the kernel rather than a
hand-rolled __PASTE to craft a unique id.
Also use __maybe_unused rather than (void) to signify that a
variable, althrough written to, may not actually be used.
v2:
- Move assignment to declaration (Christian)
- Declare the retry pointer as void *const.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-3-thomas.hellstrom@linux.intel.com
