We create the stream encoders and attach connectors for each pipe we
have. As the number of pipes has increased, we've failed to update the
topology manager maximum number of payloads to match that. Bump up the
max stream count to match number of pipes, enabling the fourth stream on
platforms that support four pipes.
Cc: stable@vger.kernel.org
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250226135626.1956012-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The fault handler is supposed to return true when it
handles the fault. The pipeDMC and ATS handlers are
returning false instead which results in the
"unreported faults" WARN triggering when it shouldn't.
Fixes: f13011a799 ("drm/i915: Pimp display fault reporting")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224173017.29500-1-ville.syrjala@linux.intel.com
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
The i915 core debugfs has no business looking at power domain guts for
runtime power status. Move the info to the more appropriate place.
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250225121742.721871-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The encoder HW/SW state verification should use a SW state which stays
unchanged while the encoder/output is active. The intel_dp::is_mst flag
used during state computation to choose between the DP SST/MST modes can
change while the output is active, if the sink gets disconnected or the
MST topology is removed for another reason. A subsequent state
verification using intel_dp::is_mst leads then to a mismatch if the
output is disabled/re-enabled without recomputing its state.
Use the encoder's active MST link count instead, which will be always
non-zero for an active MST output and will be zero for SST.
Fixes: 35d2e4b756 ("drm/i915/ddi: start distinguishing 128b/132b SST and MST at state readout")
Fixes: 40d489fac0 ("drm/i915/ddi: handle 128b/132b SST in intel_ddi_read_func_ctl()")
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250224093242.1859583-1-imre.deak@intel.com
Testing HDCP 1.4 becomes tough since the only way our code comes to
HDCP 1.4 pathway is if the monitor only supports HDCP 1.4 which
becomes tough to find sometimes.
Setting this debug_fs entry will force use to use the HDCP 1.4 path
so that more robust HDCP 1.4 testing can take place.
--v2
-Move the code to intel_hdcp.c [Jani]
-Remove useless debug logging [Jani]
-Remove Force_HDCP from the debug file [Jani]
--v3
-Remove leftover debug loggings [Jani]
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213082541.3772212-1-suraj.kandpal@intel.com
During disabling the transcoder in DP 128b/132b mode (both in case of an
MST master transcoder and in case of SST) the transcoder function must
be first disabled without changing any other field in the register (in
particular leaving the DDI port and mode select fields unchanged) and
clearing the DDI port and mode select fields separately, later during
the disabling sequences. Fix the sequence accordingly.
Bspec: 54128, 65448, 68849
Cc: Jani Nikula <jani.nikula@intel.com>
Fixes: 79a6734cd5 ("drm/i915/ddi: disable trancoder port select for 128b/132b SST")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-3-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
At the end of a 128b/132b link training sequence, the HW expects the
transcoder training pattern to be set to TPS2 and from that to normal
mode (disabling the training pattern). Transitioning from TPS1 directly
to normal mode leaves the transcoder in a stuck state, resulting in
page-flip timeouts later in the modeset sequence.
Atm, in case of a failure during link training, the transcoder may be
still set to output the TPS1 pattern. Later the transcoder is then set
from TPS1 directly to normal mode in intel_dp_stop_link_train(), leading
to modeset failures later as described above. Fix this by setting the
training patter to TPS2, if the link training failed at any point.
The clue in the specification about the above HW behavior is the
explicit mention that TPS2 must be set after the link training sequence
(and there isn't a similar requirement specified for the 8b/10b link
training), see the Bspec links below.
v2: Add bspec aspect/link to the commit log. (Jani)
Bspec: 54128, 65448, 68849
Cc: stable@vger.kernel.org # v5.18+
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217223828.1166093-2-imre.deak@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Currently intel_psr_disable is dumping out warning if PSR is not
supported. On monitor supporting only Panel Replay we are seeing this
warning. Fix this by checking Panel Replay support as well.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213111628.2183753-1-jouni.hogander@intel.com
The dedicated display PHYs reset to a power state that blocks S0ix,
increasing idle system power. After a system reset (cold boot,
S3/4/5, warm reset) if a dedicated PHY is not being brought up
shortly, use these steps to move the PHY to the lowest power state
to save power.
1. Follow the PLL Enable Sequence, using any valid frequency such
as DP 1.62 GHz. This brings lanes out of reset and enables the
PLL to allow powerdown to be moved to the Disable state.
2. Follow PLL Disable Sequence. This moves powerdown to the Disable
state and disables the PLL.
v2: Rename WA function to more descriptive (Jani)
For PTL, only port A needs this wa
Add helpers to check presence of C10 phy and pll enabling (Imre)
v3: Rename wa function (Imre)
Check return value of C10 pll tables readout (Imre)
Use PLL request to check pll enabling (Imre)
v4: Move intel_cx0_pll_is_enabled() right after
intel_cx0_pll_disable() (Imre)
Add drm_WARN_ON() if C10 state cannot be calculated from
the tables (Imre)
v5: Add debug message on PLL enabling (Imre)
Add check for intel_encoder_is_dig_port() (Imre)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100019.740556-3-mika.kahola@intel.com
For PLL programming for C10 and C20 we don't need to
carry crtc_state but instead use only necessary parts
of the crtc_state i.e. pll_state.
This change is needed to PTL wa 14023648281 where we would
need to otherwise pass an artificial crtc_state with majority
of the struct members initialized as NULL.
v2: Use err instead of val for error handling (Imre)
Unify parameter order (Imre)
v3: Fix misplaced port_clock, and is_dp in
intel_c20_pll_program() call (Imre)
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250218100019.740556-2-mika.kahola@intel.com
Hook up the display fault irq handlers for VLV/CHV.
Unfortunately the actual hardware doesn't agree with the
spec on how DPINVGTT should behave. The docs claim that
the status bits can be cleared by writing '1' to them,
but in reality there doesn't seem to be any way to clear
them. So we must disable and ignore any fault we've already
seen in the past. The entire register does reset when
the display power well goes down, so we can just always
re-enable all the bits in irq postinstall without having
to track the state beyond that.
v2: Use intel_display instead of dev_priv
Move xe gen2_error_{init,reset}() out
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-9-ville.syrjala@linux.intel.com
Make life a bit more straightforward by removing the bitwise
not from {i9xx,i965}_error_mask() and instead do it when feeding
the value to gen2_error_init(). Make life a bit easier I think.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-8-ville.syrjala@linux.intel.com
Introduce i915_error_regs as the EIR/EMR counterpart
to the IIR/IMR/IER i915_irq_regs, and update the irq
reset/postingstall to utilize them accordingly.
v2: Include xe compat versions
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-7-ville.syrjala@linux.intel.com
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Decode the display faults a bit more extensively so that one
doesn't have to translate the bitmask to planes/etc. manually.
Also for plane faults we can read out a bit of state from the
relevant plane(s) and dump that out.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-4-ville.syrjala@linux.intel.com
I want to capture a little bit more information about the state
of the plane upon faults. To that end introduce a small plane error
state struct and provide per-plane vfuncs to read it out.
For now we just stick the CTL, SURF, and SURFLIVE (if available)
registers contents in there.
v2: Use struct intel_display instead of dev_priv
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-3-ville.syrjala@linux.intel.com
The if ladder in gen8_de_pipe_fault_mask() was missing one
else, add it. Doesn't actually matter since each if branch
just returns directly. But the code is less confusing when
you always do things the same way.
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250217070047.953-2-ville.syrjala@linux.intel.com
Move intel_fb_xy_to_linear() and intel_add_fb_offsets()
These are technially sitting somewhere between plane vs. fb code,
but we do have a bunch of code like that in intel_fb.c anyway.
Might need to think about splitting intel_fb.c into pure fb vs.
plane->fb related stuff somehow, but dunno if that's even feasible.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213150220.13580-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move intel_{rotation,remapped}_info_size() into intel_fb.c as
that seems a slightly better place than intel_display.c. I suppose
these should live somewhere outside the display code as they are
also used by the gem code.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213150220.13580-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
While vlv_wait_port_ready() doens't directly talk to the VLV/CHV
DPIO PHY, the signals it's looking for do come from the PHY. So
it seems appropriate to relocate it into intel_dpio_phy.c.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213150220.13580-8-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Since we have all the necessary bits in intel_connector.c might
as well always initialize the modeset_retry_work for every connector.
Avoids yet another init function you have to remember to call.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250213150220.13580-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Try to keep all the low level skl+ universal plane register
details inside skl_universal_plane.c instead of having them
sprinkled all over the place.
v2: Rebase due to intel_display changes
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250212164330.16891-10-ville.syrjala@linux.intel.com
