Add the needed glue blocks for the RK3506-specific setup.
The RK3506 dwmac only supports up to 100MBit with a RMII PHY,
but no RGMII.
Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251023111213.298860-5-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rockchip RK3506 has two Ethernet controllers based on Synopsys DWC
Ethernet QoS IP.
Add compatible string for the RK3506 variant.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251023111213.298860-4-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A number of dwmac variants from Rockchip SoCs have turned up in the
Rockchip-specific binding, but not in the main list in snps,dwmac.yaml
which as the comment indicates is needed for accurate matching.
So add the missing rk3528, rk3568 and rv1126 to the main list.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251023111213.298860-3-heiko@sntech.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lad Prabhakar says:
====================
net: ravb: SoC-specific configuration
This series addresses several issues in the Renesas Ethernet AVB (ravb)
driver related to SoC-specific resource configuration.
The series includes the following changes:
- Make DBAT entry count configurable per SoC
The number of descriptor base address table (DBAT) entries is not uniform
across all SoCs. Pass this information via the hardware info structure and
allocate resources accordingly.
- Allocate correct number of queues based on SoC support
Use the per-SoC configuration to determine whether a network control queue
is available, and allocate queues dynamically to match the SoC's
capability.
v2: https://lore.kernel.org/20251017151830.171062-1-prabhakar.mahadev-lad.rj@bp.renesas.com
====================
Link: https://patch.msgid.link/20251023112111.215198-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the per-SoC match data flag `nc_queues` to decide how many TX/RX
queues to allocate. If the SoC does not provide a network-control queue,
fall back to a single TX/RX queue. Obtain the match data before calling
alloc_etherdev_mqs() so the allocation is sized correctly.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251023112111.215198-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid wasting coherent DMA memory by allocating the descriptor base
address table sized for the actual number of DBAT/CDARq entries supported
by the SoC. Some platforms (for example GBETH) only provide two CDARq
entries; previously the driver always allocated space for 22 entries which
needlessly consumed memory on those systems.
Pass the per-SoC dbat_entry_num via struct ravb_hw_info and use it for
allocation and initialization in probe. This sizes the table correctly and
removes the unnecessary memory overhead on SoCs with fewer DBAT entries.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://patch.msgid.link/20251023112111.215198-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: pcs support part 2
This is the next part of stmmac PCS support. Not much here, other than
dealing with what remains of the interrupts, which are the PCS AN
complete and PCS Link interrupts, which are just cleared and update
accounting.
Currently, they are enabled at core init time, but if we have an
implementation that supports multiple PHY interfaces, we want to
enable only the appropriate interrupts.
I also noticed that stmmac_fpe_configure_pmac() also modifies the
interrupt mask during run time. As a pre-requisit, we need a way
to ensure that we don't have different threads modifying the
interrupt settings at the same time. So, the first patch introduces
a new function and a spinlock which must be held when manipulating
the interrupt enable/mask state.
The second patch adds the PCS bits for enabling the PCS AN and PCS
link interrupts when the PCS is in-use.
====================
Link: https://patch.msgid.link/aPn5YVeUcWo4CW3c@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to the PCS instance for controlling the PCS interrupts
depending on whether the PCS is used.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrtp-0000000BMYs-3bhI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: add phylink managed WoL and convert stmmac
This series is implementing the thoughts of Andrew, Florian and myself
to improve the quality of Wake-on-Lan (WoL) implementations.
This changes nothing for MAC drivers that do not wish to participate in
this, but if they do, then they gain the benefit of phylink configuring
WoL at the point closest to the media as possible.
We first need to solve the problem that the multitude of PHY drivers
report their device supports WoL, but are not capable of waking the
system. Correcting this is fundamental to choosing where WoL should be
enabled - a mis-reported WoL support can render WoL completely
ineffective.
The only PHY drivers which uses the driver model's wakeup support is
drivers/net/phy/broadcom.c, and until recently, realtek. This means
we have the opportunity for PHY drivers to be _correctly_ converted
to use this method of signalling wake-up capability only when they can
actually wake the system, and thus providing a way for phylink to
know whether to use PHY-based WoL at all.
However, a PHY driver not implementing that logic doesn't become a
blocker to MACs wanting to convert. In full, the logic is:
- phylink supports a flag, wol_phy_legacy, which forces phylink to use
the PHY-based WoL even if the MDIO device is not marked as wake-up
capable.
- when wol_phy_legacy is not set, we check whether the PHY MDIO device
is wake-up capable. If it is, we offer the WoL request to the PHY.
- if neither wol_phy_legacy is set, or the PHY is not wake-up capable,
we do not offer the WoL request to the PHY.
In both cases, after setting any PHY based WoL, we remove the options
that the PHY now reports are enabled from the options mask, and offer
these (if any) to the MAC. The mac will get a "mac_set_wol()" method
call when any settings change.
Phylink mainatains the WoL state for the MAC, so there's no need for
a "mac_get_wol()" method. There may be the need to set the initial
state but this is not supported at present.
I've also added support for doing the PHY speed-up/speed-down at
suspend/resume time depending on the WoL state, which takes another
issue from the MAC authors.
Lastly, with phylink now having the full picture for WoL, the
"mac_wol" argument for phylink_suspend() becomes redundant, and for
MAC drivers that implement mac_set_wol(), the value passed becomes
irrelevant.
====================
Link: https://patch.msgid.link/aPnyW54J80h9DmhB@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert stmmac to use phylink-managed Wake-on-Lan support. To achieve
this, we implement the .mac_wol_set() method, which simply configures
the driver model's struct device wakeup for stmmac, and sets the
priv->wolopts appropriately.
When STMMAC_FLAG_USE_PHY_WOL is set, in the stmmac world this means to
only use the PHY's WoL support and ignore the MAC's WoL capabilities.
To preserve this behaviour, we enable phylink's legacy mode, and avoid
telling phylink that the MAC has any WoL support. This achieves the
same functionality for this case.
When STMMAC_FLAG_USE_PHY_WOL is not set, we provide the MAC's WoL
capabilities to phylink, which then allows phylink to choose between
the PHY and MAC for WoL depending on their individual capabilities
as described in the phylink commit. This only augments the WoL
functionality with PHYs that declare to the driver model that they are
wake-up capable. Currently, very few PHY drivers support this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrRC-0000000BLzg-2tA4@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers, e.g. stmmac, use the speed_up()/speed_down() APIs to
gain additional power saving during Wake-on-LAN where the PHY is
managing the state.
Add support to phylink for this, which can be enabled by the MAC
driver. Only change the PHY speed if the PHY is configured for
wake-up, but without any wake-up on the MAC side, as MAC side
means changing the configuration once the negotiation has
completed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrR7-0000000BLza-2PjK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add core phylink managed Wake-on-Lan support, which is enabled when the
MAC driver fills in the new .mac_wol_set() method that this commit
creates.
When this feature is disabled, phylink acts as it has in the past,
merely passing the ethtool WoL calls to phylib whenever a PHY exists.
No other new functionality provided by this commit is enabled.
When this feature is enabled, a more inteligent approach is used.
Phylink will first pass WoL options to the PHY, read them back, and
attempt to set any options that were not set at the PHY at the MAC.
Since we have PHY drivers that report they support WoL, and accept WoL
configuration even though they aren't wired up to be capable of waking
the system, we need a way to differentiate between PHYs that think
they support WoL and those which actually do. As PHY drivers do not
make use of the driver model's wake-up infrastructure, but could, we
use this to determine whether PHY drivers can participate. This gives
a path forward where, as MAC drivers are converted to this, it
encourages PHY drivers to also be converted.
Phylink will also ignore the mac_wol argument to phylink_suspend() as
it now knows the WoL state at the MAC.
MAC drivers are expected to record/configure the Wake-on-Lan state in
their .mac_set_wol() method, and deal appropriately with it in their
suspend/resume methods. The driver model provides assistance to set the
IRQ wake support which may assist driver authors in achieving the
necessary configuration.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrR2-0000000BLzU-1xYL@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add phy_may_wakeup() which uses the driver model's device_may_wakeup()
when the PHY driver has marked the device as wakeup capable in the
driver model, otherwise use phy_drv_wol_enabled().
Replace the sites that used to call phy_drv_wol_enabled() with this
as checking the driver model will be more efficient than checking the
WoL state.
Export phy_may_wakeup() so that phylink can use it.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrQx-0000000BLzO-1RLt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add phy_can_wakeup() to report whether the PHY driver has marked the
PHY device as being wake-up capable as far as the driver model is
concerned.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vBrQs-0000000BLzI-0w3U@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function smc_find_ism_store_rc() is used to record the reason
why a suitable device (either ISM or RDMA) could not be found.
However, its name suggests it is ISM-specific, which is misleading.
Rename it to better reflect its actual usage.
No functional changes.
Signed-off-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251023020012.69609-1-dust.li@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix to avoid the usage of the `ret` variable uninitialized in the
following macro expansions.
It solves the following warning:
In file included from netlink-dumps.c:21:
netlink-dumps.c: In function ‘dump_extack’:
../kselftest_harness.h:788:35: warning: ‘ret’ may be used uninitialized [-Wmaybe-uninitialized]
788 | intmax_t __exp_print = (intmax_t)__exp; \
| ^~~~~~~~~~~
../kselftest_harness.h:631:9: note: in expansion of macro ‘__EXPECT’
631 | __EXPECT(expected, #expected, seen, #seen, ==, 0)
| ^~~~~~~~
netlink-dumps.c:169:9: note: in expansion of macro ‘EXPECT_EQ’
169 | EXPECT_EQ(ret, FOUND_EXTACK);
| ^~~~~~~~~
The issue can be reproduced, building the tests, with the command:
make -C tools/testing/selftests TARGETS=net
Signed-off-by: Alessandro Zanni <alessandro.zanni87@gmail.com>
Link: https://patch.msgid.link/20251023205354.28249-1-alessandro.zanni87@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
neighbour: Convert RTM_GETNEIGHTBL and RTM_SETNEIGHTBL to RCU.
Patch 1 & 2 are prep for RCU conversion for RTM_GETNEIGHTBL.
Patch 3 & 4 converts RTM_GETNEIGHTBL and RTM_SETNEIGHTBL to RCU.
Patch 5 converts the neighbour table rwlock to the plain spinlock.
====================
Link: https://patch.msgid.link/20251022054004.2514876-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only neigh_for_each() and neigh_seq_start/stop() are on the
reader side of neigh_table.lock.
Let's convert rwlock to the plain spinlock.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-6-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neightbl_set() fetches neigh_tables[] and updates attributes under
write_lock_bh(&tbl->lock), so RTNL is not needed.
neigh_table_clear() synchronises RCU only, and rcu_dereference_rtnl()
protects nothing here.
If we released RCU after fetching neigh_tables[], there would be no
synchronisation to block neigh_table_clear() further, so RCU is held
until the end of the function.
Another option would be to protect neigh_tables[] user with SRCU
and add synchronize_srcu() in neigh_table_clear().
But, holding RCU should be fine as we hold write_lock_bh() for the
rest of neightbl_set() anyway.
Let's perform RTM_SETNEIGHTBL under RCU and drop RTNL.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-5-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neightbl_dump_info() calls these functions for each neigh_tables[]
entry:
1. neightbl_fill_info() for tbl->parms
2. neightbl_fill_param_info() for tbl->parms_list (except tbl->parms)
Both functions rely on the table lock (read_lock_bh(&tbl->lock))
and RTNL is not needed.
Let's fetch the table under RCU and convert RTM_GETNEIGHTBL to RCU.
Note that the first entry of tbl->parms_list is tbl->parms.list and
embedded in neigh_table, so list_next_entry() is safe.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NEIGH_VAR() is read locklessly in the fast path, and IPv6 ndisc uses
NEIGH_VAR_SET() locklessly.
The next patch will convert neightbl_dump_info() to RCU.
Let's annotate accesses to neigh_param with READ_ONCE() and WRITE_ONCE().
Note that ndisc_ifinfo_sysctl_change() uses &NEIGH_VAR() and we cannot
use '&' with READ_ONCE(), so NEIGH_VAR_PTR() is introduced.
Note also that NEIGH_VAR_INIT() does not need WRITE_ONCE() as it is before
parms is published. Also, the only user hippi_neigh_setup_dev() is no
longer called since commit e3804cbebb ("net: remove COMPAT_NET_DEV_OPS"),
which looks wrong, but probably no one uses HIPPI and RoadRunner.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-3-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We will convert RTM_GETNEIGHTBL to RCU soon, where we traverse
tbl->parms_list under RCU in neightbl_dump_info().
Let's use RCU list helper for neigh_parms in neigh_parms_alloc()
and neigh_parms_release().
neigh_table_init() uses the plain list_add() for the default
neigh_parm that is embedded in the table and not yet published.
Note that neigh_parms_release() already uses call_rcu() to free
neigh_parms.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251022054004.2514876-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: dsa: lantiq_gswip: use regmap for register access
This series refactors the lantiq_gswip driver to utilize the regmap API
for register access, replacing the previous approach of open-coding
register operations.
Using regmap paves the way for supporting different busses to access the
switch registers, for example it makes it easier to use an MDIO-based
method required to access the registers of the MaxLinear GSW1xx series
of dedicated switch ICs.
Apart from that, the use of regmap improves readability and
maintainability of the driver by standardizing register access.
When ever possible changes were made using Coccinelle semantic patches,
sometimes adjusting white space and adding line breaks when needed.
The remaining changes which were not done using semantic patches are
small and should be easy to review and verify.
The whole series has been
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
====================
Link: https://patch.msgid.link/cover.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'clear' parameter of gswip_mii_mask_cfg() and gswip_mii_mask_pcdu()
is inconsistent with the semantics of regmap_write_bits() which also
applies the mask to the value to be written.
Change the semantic mask/set of the functions gswip_mii_mask_cfg() and
gswip_mii_mask_pcdu() to follow the regmap_write_bits() pattern.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Link: https://patch.msgid.link/218854236c97a152af071852bda83d02ff2dd918.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Further optimize the previous naive conversion of the *_mask() accessor
functions to regmap_write_bits by manually removing redundant mask
operands.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Link: https://patch.msgid.link/fce2f964b22fe3efc234c664b1e50de28dddf512.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use regmap for register access in preparation for supporting the MaxLinear
GSW1xx family of switches connected via MDIO or SPI.
Rewrite the existing accessor read-poll-timeout functions to use calls to
the regmap API for now.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Link: https://patch.msgid.link/535d968bc6319a74bdf76166ef19364ee659285f.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The comment above writing the default PVID incorrectly states that
"GSWIP 2.2 (GRX300) and later program here the VID directly."
The truth is that even GSWIP 2.2 and newer maintain the behavior of
GSWIP 2.1 unless the VLANMD bit in PCE Global Control Register 1 is
set ("GSWIP2.2 VLAN Mode").
Fix the misleading comment accordingly.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Acked-by; Hauke Mehrtens <hauke@hauke-m.de>:
Link: https://patch.msgid.link/018056a575503d9797f3222f71a988e825316be0.1761045000.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'if (!key && hash_location)' check in tcp_inbound_md5_hash() implies
that hash_location might be null. However, later code in the function
dereferences hash_location anyway, without checking for null first.
Fortunately, there is no real bug, since tcp_inbound_md5_hash() is
called only with non-null values of hash_location.
Therefore, remove the unnecessary and misleading null check of
hash_location. This silences a Smatch static checker warning
(https://lore.kernel.org/netdev/aPi4b6aWBbBR52P1@stanley.mountain/)
Also fix the related comment at the beginning of the function.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Link: https://patch.msgid.link/20251022221209.19716-1-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the long-standing comment in unix_release_sock() that described a
behavioral difference between Linux and BSD regarding when ECONNRESET is
sent to connected UNIX sockets upon closure.
As confirmed by testing on macOS (similar to BSD behavior), ECONNRESET
is only observed for SOCK_DGRAM sockets, not for SOCK_STREAM. Meanwhile,
Linux already returns ECONNRESET in cases where a socket is closed with
unread data or is not yet accept()ed. This means the previous comment no
longer accurately describes current behavior and is misleading.
Suggested-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Sunday Adelodun <adelodunolaoluwa@yahoo.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251021195906.20389-1-adelodunolaoluwa@yahoo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch does not introduce any logical change, it just removes
duplicated code in airoha_regs.h.
Fix naming conventions in airoha_regs.h.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20251022-airoha-regs-cosmetics-v2-1-e0425b3f2c2c@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting "fixes"
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rD+V
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can. Slim pickings, I'm guessing people haven't
really started testing.
Current release - new code bugs:
- eth: mlx5e:
- psp: avoid 'accel' NULL pointer dereference
- skip PPHCR register query for FEC histogram if not supported
Previous releases - regressions:
- bonding: update the slave array for broadcast mode
- rtnetlink: re-allow deleting FDB entries in user namespace
- eth: dpaa2: fix the pointer passed to PTR_ALIGN on Tx path
Previous releases - always broken:
- can: drop skb on xmit if device is in listen-only mode
- gro: clear skb_shinfo(skb)->hwtstamps in napi_reuse_skb()
- eth: mlx5e
- RX, fix generating skb from non-linear xdp_buff if program
trims frags
- make devcom init failures non-fatal, fix races with IPSec
Misc:
- some documentation formatting 'fixes'"
* tag 'net-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
net/mlx5: Fix IPsec cleanup over MPV device
net/mlx5: Refactor devcom to return NULL on failure
net/mlx5e: Skip PPHCR register query if not supported by the device
net/mlx5: Add PPHCR to PCAM supported registers mask
virtio-net: zero unused hash fields
net: phy: micrel: always set shared->phydev for LAN8814
vsock: fix lock inversion in vsock_assign_transport()
ovpn: use datagram_poll_queue for socket readiness in TCP
espintcp: use datagram_poll_queue for socket readiness
net: datagram: introduce datagram_poll_queue for custom receive queues
net: bonding: fix possible peer notify event loss or dup issue
net: hsr: prevent creation of HSR device with slaves from another netns
sctp: avoid NULL dereference when chunk data buffer is missing
ptp: ocp: Fix typo using index 1 instead of i in SMA initialization loop
net: ravb: Ensure memory write completes before ringing TX doorbell
net: ravb: Enforce descriptor type ordering
net: hibmcge: select FIXED_PHY
net: dlink: use dev_kfree_skb_any instead of dev_kfree_skb
Documentation: networking: ax25: update the mailing list info.
net: gro_cells: fix lock imbalance in gro_cells_receive()
...
- Fix a recent coding mistake causing __acpi_node_get_property_reference()
arguments to be put in an incorrect order (Sunil V L)
- Work around bogus -Wstringop-overread warning on LoongArch since
GCC 11 in ACPICA (Xi Ruoyao)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmj6IhISHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1XNoIAJHXoSu9daR9x8GgxYj4fKRDv4NEeVJF
W2ilgU1WUSIOR4YBRPiqjWqi2jGNVMP3gycmoMmusQnfIJYBVQH/Q5AtxkT4HLYB
jaNlQYUiUYi6KWwhnLs+NJu6ey5SvuxOffyIKnlvyl5N2tVDLF/50vLsknSEdR/z
3/g5RGkQ7oZTQrt9OguWq2lsn/c/FSPED/wBv4GjzNAgRLx2TGoHlflaDxN9le5o
2gDFk8gfVvaP/z7qcpsgmTx3RwVpelxV9MUgWur65i2YCkOWBlJL0a4Sr1JWKyzL
dJij0f/KH5RezuGzcDeGn2YgdttwV3dBhTn3bEvxmgpXvLLZcj0V6jk=
=SGjm
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix a fallout of a recent ACPI properties management update and
work around a compiler bug in ACPICA:
- Fix a recent coding mistake causing __acpi_node_get_property_reference()
arguments to be put in an incorrect order (Sunil V L)
- Work around bogus -Wstringop-overread warning on LoongArch since
GCC 11 in ACPICA (Xi Ruoyao)"
* tag 'acpi-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPICA: Work around bogus -Wstringop-overread warning since GCC 11
ACPI: property: Fix argument order in __acpi_node_get_property_reference()
- Add missing _RET == 0 condition to recently introduced conditional
guard definitions for runtime PM (Rafael Wysocki)
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmj6D/ASHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1+eoIAJ1sl2E0tpzsThg4yEjcPH+6Xa4KdYbQ
dHQ1vvdIMZ9D+mi0ububT6fjmd9CsIcZElst9aEeXqLO1BoQrtApHWXuJ6RRkLWz
iEeMusB2wNkUBv/I3jgtYJCOsSdwFEpl8172qrG9RBQftOO3rsUv1RVgTZ+8C8fM
Fb1BpoSgYFCq1nBXhHMaJZElAIECGwEpTQOQ2/DlfTf6uVVIm20ijmLb2idgcgnt
ijeu2qGHUQK4ZaABDL/60CbA7+f21AmtzRX7VV95h2ALv5sPnCa5o/ZKthhGhR2b
wcPejPeVqJc9XHSEFUdOtLGnjZl7xBrW/HeyclAozdqG/ma4zUADHXA=
=z5JQ
-----END PGP SIGNATURE-----
Merge tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These revert a cpuidle menu governor commit leading to a performance
regression, fix an amd-pstate driver regression introduced recently,
and fix new conditional guard definitions for runtime PM.
- Add missing _RET == 0 condition to recently introduced conditional
guard definitions for runtime PM (Rafael Wysocki)
- Revert a cpuidle menu governor change that introduced a serious
performance regression on Chromebooks with Intel Jasper Lake
processors (Rafael Wysocki)
- Fix an amd-pstate driver regression leading to EPP=0 after
hibernation (Mario Limonciello)"
* tag 'pm-6.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: runtime: Fix conditional guard definitions
Revert "cpuidle: menu: Avoid discarding useful information"
cpufreq/amd-pstate: Fix a regression leading to EPP 0 after hibernate
-----BEGIN PGP SIGNATURE-----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=YN21
-----END PGP SIGNATURE-----
Merge tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- in send, fix duplicated rmdir operations when using extrefs
(hardlinks), receive can fail with ENOENT
- fixup of error check when reading extent root in ref-verify and
damaged roots are allowed by mount option (found by smatch)
- fix freeing partially initialized fs info (found by syzkaller)
- fix use-after-free when printing ref_tracking status of delayed
inodes
* tag 'for-6.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: ref-verify: fix IS_ERR() vs NULL check in btrfs_build_ref_tree()
btrfs: fix delayed_node ref_tracker use after free
btrfs: send: fix duplicated rmdir operations when using extrefs
btrfs: directly free partially initialized fs_info in btrfs_check_leaked_roots()
Devcom device and component registration isn't always critical to the
functionality of the caller, hence the registration can fail and we can
continue working with an ERR_PTR value saved inside a variable.
In order to avoid that make sure all devcom failures return NULL.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761136182-918470-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Check the PCAM supported registers mask before querying the PPHCR
register, as it is not supported in older devices.
Fixes: 44907e7c8f ("net/mlx5e: Add logic to read RS-FEC histogram bin ranges from PPHCR")
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761136182-918470-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the PPHCR bit to the port_access_reg_cap_mask field of PCAM
register to indicate that the device supports the PPHCR register
and the RS-FEC histogram feature.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Yael Chemla <ychemla@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1761136182-918470-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When GSO tunnel is negotiated virtio_net_hdr_tnl_from_skb() tries to
initialize the tunnel metadata but forget to zero unused rxhash
fields. This may leak information to another side. Fixing this by
zeroing the unused hash fields.
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Fixes: a2fb4bc4e2 ("net: implement virtio helpers to handle UDP GSO tunneling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://patch.msgid.link/20251022034421.70244-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
