Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Add the necessary bits into the gen2 platforms tables and handlers
to allow decoding streams into 10bit pixel formats.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The 10bit pixel format can be only used when the decoder identifies the
stream as decoding into 10bit pixel format buffers, so update the
find_format helper to filter the formats and only allow the proper
formats when setting or trying a capture format.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Update the gen2 response and vdec s_fmt code to take in account
the P010 and QC010 when calculating the width, height and stride.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add the necessary plumbing into the HFi Gen2 to signal the decoder
the right 10bit pixel format and stride when in compressed mode.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The P010 (YUV format with 16-bits per pixel with interleaved UV)
and QC10C (P010 compressed mode similar to QC08C) requires specific
buffer calculations to allocate the right buffer size for the DPB
(decoded picture buffer) frames and frames consumed by userspace.
Similar to 8bit, the 10bit DPB frames uses QC10C format.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Use div_u64() instead of mult_fract as u64 operator division fails on 32 bit
systems which don't link against libgcc.
Fixes: 5c66647a5c ("media: iris: add FPS calculation and VPP FW overhead in frequency formula")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606030132.qnBXVDkM-lkp@intel.com/
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add support for the vfe-340 PIX write engine, enabling frame capture
through the PIX video device (e.g. msm_vfe0_pix). The PIX path requires
a separate configuration flow from RDI, including cropping setup, line-
based write engine configuration, and the correct packer format based
on the input pixel format.
In contrast to RDI, the PIX interface embeds a lightweight processing
engine we can use for cropping, configuring custom stride/alignment,
and, in the future, extracting frame statistics.
The functionality has been validated on Arduino-Uno-Q with:
media-ctl -d /dev/media0 --reset
media-ctl -d /dev/media0 -l '"msm_csiphy0":1->"msm_csid0":0[1],"msm_csid0":4->"msm_vfe0_pix":0[1]'
media-ctl -d /dev/media0 -V '"imx219 1-0010":0[fmt:SRGGB8_1X8/640x480 field:none]'
media-ctl -d /dev/media0 -V '"msm_csiphy0":0[fmt:SRGGB8_1X8/640x480 field:none]'
media-ctl -d /dev/media0 -V '"msm_csid0":0[fmt:SRGGB8_1X8/640x480 field:none]'
media-ctl -d /dev/media0 -V '"msm_vfe0_pix":0[fmt:SRGGB8_1X8/640x480 field:none]'
yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 640x480 /dev/video3
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
[bod: Squash down fix for bpp unused in vfe_packer_format]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
We need to properly map camss WM index to our internal WM client
instance. Today we only support RDI interfaces with the RDI_WM
macro, introduce a __wm_to_client helper to support any interface.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add PIX path support to the CSID-340 driver. The hardware exposes a
dedicated PIX interface in addition to the existing RDI paths, but
the driver only supported RDI stream configuration so far.
The PIX path is configured similarly to RDI but requires decode-format
to be specified.
The PIX pipeline can subsequently perform further processing,
including scaling, cropping, and statistics.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The CSID-340 block uses different register offsets for the PIX and RDI
interfaces, but the driver previously indexed these registers directly
with the camss port number. This happened to work for RDI because the
port index matches the RDI register layout, but this assumption breaks
with upcoming PIX interface support
Introduce an explicit port-to-interface mapping and use the mapped iface
index when programming CSID_CFG0 and CSID_CTRL. This replaces the
standalone __csid_ctrl_rdi() helper and simplifies the RDI stream setup
path.
Also correct the CSID_CFG0/CTRL base offsets and clean up the code in
preparation for full PIX path support.
Like RDI, PIX outputs Bayer frames but can also achieve some image
processing such as scaling, cropping and generating statitics (e.g.
histogram), it also offer more flexebility in term of image alignment
and stride. All of that can then later be leveraged to improve
software or hardware frames post-processing.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The former RDI-specific register definitions (CSID_RDI_CFG0/CTRL) are
renamed to unified CSID_CFG0/CSID_CTRL variants, as their layout is
interface agnostic. This refactoring provides the foundation for
extending csid-340 with missing PIX interface/path support.
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The HFI sys ops were previously initialized in probe() but, we don't
have firmware loaded at probe time. Since HFI is tightly coupled to
firmware, initialize the HFI sys ops after firmware has been successfully
loaded and booted.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The struct iris_fmt unites pixfmt with the plane type, however the type
from the struct is not actually used. Drop the struct completely and use
u32 pixfmt in all the callsites.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Introduce platform data for X1P42100, derived from SM8550 but using a
different clock configuration and a dedicated OPP setup.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
On X1P42100 the Iris block has an extra BSE clock. Wire this clock into
the power on/off sequence.
The BSE clock is used to drive the Bin Stream Engine, which is a sub-block
of the video codec hardware responsible for bitstream-level processing. It
is required to be enabled separately from the core clock to ensure proper
codec operation.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The existing iris_vpu_dec_comv_size() used VIDEO_MAX_FRAME (32) as
num_comv count unconditionally when calculating the co-located motion
vector (COMV) buffer size. This resulted in an oversized COMV buffer
allocation throughout decode session, wasting memory regardless of
actual number of buffers required.
For VPU3x and VPU4x platforms, introduce iris_vpu3x_4x_dec_comv_size() to
replace iris_vpu_dec_comv_size(). These derive num_comv dynamically, it
uses inst->fw_min_count once the firmware has reported its buffer
requirements, and fallback to output count during initialization before
firmware has communicated its requirements. This aligns the COMV buffer
size to the actual count needed rather than always allocating with fixed
VIDEO_MAX_FRAME value.
Additionally, during iris_vdec_inst_init(), fw_min_count was initialized
to MIN_BUFFERS instead of 0. This masked the fallback logic and caused the
COMV size calculation to use MIN_BUFFERS even before firmware had reported
its actual requirements. Fix this by initializing fw_min_count to 0.
During testing of 1080p AVC, it reduces the COMV buffer size from 32.89MB
to 6.16MB per decode session, significantly reducing memory consumption.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The driver was using a fixed default FPS value when calculating the VPU
frequency. This caused wrong frequency requests for high‑frame‑rate
streams, for example 4K at 240 FPS. Because of this, the hardware was
running at a lower frequency than needed.
Add the FPS measurement based on the decoder input buffer arrival rate.
The measured FPS is stored per instance and used in frequency calculation
instead of the fixed default FPS. The value is clamped so that it does
not exceed platform limits. Add a VPP firmware overhead when running in
STAGE_2.
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Vishnu Reddy <busanna.reddy@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Modify iris_hfi_gen1_packet_session_set_property to simplify size
calculations and remove redundant code patterns.
Previously, packet->shdr.hdr.size was incremented by sizeof(u32) in
every switch case, resulting in repetitive and less maintainable
logic.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add hierarchical coding support for both gen1 and gen2 encoders by enabling
the following V4L2 controls:
H264:
V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING,
V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE,
V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER
HEVC(gen2 only):
V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_TYPE,
V4L2_CID_MPEG_VIDEO_HEVC_HIER_CODING_LAYER
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add support for B-frame configuration on both gen1 and gen2 encoders by
enabling V4L2_CID_MPEG_VIDEO_B_FRAMES control.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add Long-Term Reference(LTR) frame support for both gen1 and gen2
encoders by enabling the following V4L2 controls:
V4L2_CID_MPEG_VIDEO_LTR_COUNT
V4L2_CID_MPEG_VIDEO_USE_LTR_FRAMES
V4L2_CID_MPEG_VIDEO_FRAME_LTR_INDEX
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add support for intra refresh configuration on gen1 encoder by enabling
V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD and
V4L2_CID_MPEG_VIDEO_INTRA_REFRESH_PERIOD_TYPE controls.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Requesting the IRQ and then immediately disabling it is fragile as it
leaves a window when the IRQ is still enabled although the underlying
device might be not completely setup for IRQ handling. Pass
IRQF_NO_AUTOEN instead of calling disable_irq_nosync().
Fixes: fb583a2143 ("media: iris: introduce host firmware interface with necessary hooks")
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Appended Fix to patch title for -stable clarity]
[bod: Added cc stable for backporting]
Cc: stable@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Add decode and encode blacklist properties to allow disabling different
codecs per Venus device, instead of doing it per HFI version.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Attach power domains for vdec and venc cores and power them up if a vdec
or venc session is started.
Vcodec clocks are added and enabled to the core Venus device both for
vcodec0 and vcodec1. To ensure they are added only once, introduce a new
property "vcodec_clks", which is an array of clocks which are enabled
both during decode and encode and is retrieved from the device tree only
once.
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Erikas Bitovtas <xerikasxx@gmail.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Encoder HFI capabilities on v6 enforce a 16-pixel step for frame and blur
dimensions, which does not reflect actual hardware requirements and can
reject valid userspace configurations.
Relax the step size to 1 while leaving min/max limits unchanged.
Fixes: 869d77e706 ("media: venus: hfi_plat_v6: Populate capabilities for v6")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Encoder HFI capabilities on v4 advertise a 16-pixel step for frame and
blur dimensions. This is overly restrictive and can cause userspace caps
negotiation to fail even for valid resolutions.
Relax the advertised step size to 1 and keep alignment enforcement in
buffer layout and size calculations.
Fixes: 8b88cabef4 ("media: venus: hfi_plat_v4: Populate codecs and capabilities for v4")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
get_framesize_raw_nv12() currently adds SZ_4K to the UV plane size and an
additional SZ_8K to the total buffer size. This inflates the calculated
sizeimage and leads userspace to over-allocate buffers without a clear
requirement.
Remove the extra SZ_4K/SZ_8K padding and compute the NV12 size as the sum
of Y and UV planes, keeping the final ALIGN(size, SZ_4K) intact.
Fixes: e1cb72de70 ("media: venus: helpers: move frame size calculations on common place")
Signed-off-by: Renjiang Han <renjiang.han@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
This reverts commit c0ab2901fc ("media: venus: hfi_platform: Correct
supported codecs for sc7280"). The codecs might be deprecated, but they
still work (somewhat) perfectly and don't cause any issues with the rest
of the system. Reenable VP8 codecs by reverting the offending commit.
Tested with fluster:
|Test|FFmpeg-VP8-v4l2m2m|GStreamer-VP8-V4L2|
|TOTAL|50/61|50/61|
|TOTAL TIME|12.171s|11.824s|
Fixes: c0ab2901fc ("media: venus: hfi_platform: Correct supported codecs for sc7280")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
In preparation to adding support for several firmware revisions to be
used for a platform, extract the firmware description data. It
incorporates firmware name, HFI ops and buffer requirements of the
particular firmware build.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Made struct iris_firmware_desc into static consts to pass media CI]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The linux-firmware is providing the vpuNN_pM.mbn firmware for SM8250
since August of 2024. Stop using the legacy firmware name
(vpu-1.0/venus.mbn) and switch to the standard firmware name schema
(vpu/vpu20_p4.mbn).
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Finalize the logical separation of the software and hardware interface
descriptions by moving hardware properties to the files specific to the
particular VPU version.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Having firmware-related fields in platform data results in the tying
platform data to the HFI firmware data rather than the actual hardware.
For example, SM8450 uses Gen2 firmware, so currently its platform data
should be placed next to the other gen2 platforms, although it has the
VPU2.0 core, similar to the one found on SM8250 and SC7280 and so the
hardware-specific platform data is also close to those devices.
Split firmware data to a separate struct, separating hardware-related
data from the firmware interfaces.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The HW response time is a constant between platforms. Remove it from the
iris_platform_data structure and use it directly.
Suggested-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The get_instance() is a callback tightly connected to the HFI
implementation. Move it into the new iris_hfi_sys_ops structure, merging
all core callbacks into a single vtable.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
There is little point in having two different structures for HFI-related
core ops. Merge both of them into the new iris_hfi_ops structure.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Calling HFI instance-specific ops should not require double indirection
through the core ops. Split instance-specific ops to a separate struct,
keep a pointer to it in struct iris_inst and set it directly in the
get_instance function.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
To note that iris_set_num_comv() is gen2-internal, rename it to
iris_hfi_gen2_set_num_comv() and then stop using hfi_ops indirection to
set session property (like other functions in this file do).
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The set_preset_registers is (currently) common to all supported devices.
Extract it to a iris_vpu_common.c and call it directly from
iris_vpu_power_on(). Later, if any of the devices requires special
handling, it can be sorted out separately.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The PAS ID, the authentication service ID, used by the Iris is a
constant and it is not expected to change anytime. Drop it from the
platform data and use the constant instead.
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
With the Iris and Venus driver having more or less feature parity for
"HFI 6xx" platforms and with Iris gaining support for SC7280, flip the
switch. Use Iris by default for SM8250 and SC7280, the platforms which
are supported by both drivers, and use Venus only if Iris is not
compiled at all. Use IS_ENABLED to strip out the code and data
structures which are used by the disabled platforms.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Vikash Garodia <vikash.garodia@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
[bod: Moved two conditional compats inside of one ifdef for ci]
[bod: Changed IS_V6(core) (0) to ((void)(core), 0) for ci]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
On SM8250 most of the video clocks are powered by the MMCX domain, while
the PLL is powered on by the MX domain. Extend the driver to support
scaling both power domains, while keeping compatibility with the
existing DTs, which define only the MX domain.
Fixes: 0aeabfa29a ("media: venus: core: add sm8250 DT compatible and resource data")
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
On SM8250 most of the video clocks are powered by the MMCX domain, while
the PLL is powered on by the MX domain. Extend the driver to support
scaling both power domains, while keeping compatibility with the
existing DTs, which define only the MX domain.
Fixes: 79865252ac ("media: iris: enable video driver probe of SM8250 SoC")
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Now as all UBWC configuration bits were migrated to be used or derived
from the global UBWC platform-specific data, drop the unused struct and
field definitions.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
The UBWC max_channels spreading is specified in the Iris driver, but it
also can be calculated from the platform UBWC config. Use the platform
UBWC configuration instead of specifying it directly in the source.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Tested-by: Wangao Wang <wangao.wang@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
