Upcoming GNSS (NMEA) port type support requires exporting it via the
GNSS subsystem. On another hand, we still need to do basic WWAN core
work: call the port stop operation, purge queues, release the parent
WWAN device, etc. To reuse as much code as possible, split the port
unregistering function into the deregistration of a regular WWAN port
device, and the common port tearing down code.
In order to keep more code generic, break the device_unregister() call
into device_del() and put_device(), which release the port memory
uniformly.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-5-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upcoming GNSS (NMEA) port type support requires exporting it via the
GNSS subsystem. On another hand, we still need to do basic WWAN core
work: find or allocate the WWAN device, make it the port parent, etc. To
reuse as much code as possible, split the port creation function into
the registration of a regular WWAN port device, and basic port struct
initialization.
To be able to use put_device() uniformly, break the device_register()
call into device_initialize() and device_add() and call device
initialization earlier.
While at it, fix a minor number leak upon WWAN port registration
failure.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20260126062158.308598-4-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need information about existing WWAN device children since we remove
the device after removing the last child. Previously, we tracked users
implicitly by checking whether ops was registered and existence of a
child device of the wwan_class class. Upcoming GNSS (NMEA) port type
support breaks this approach by introducing a child device of the
gnss_class class.
And a modem driver can easily trigger a kernel Oops by removing regular
(e.g., MBIM, AT) ports first and then removing a GNSS port. The WWAN
device will be unregistered on removal of a last regular WWAN port. And
subsequent GNSS port removal will cause NULL pointer dereference in
simple_recursive_removal().
In order to support ports of classes other than wwan_class, switch to
explicit references counting. Introduce a dedicated counter to the WWAN
device struct, increment it on every wwan_create_dev() call, decrement
on wwan_remove_dev(), and actually unregister the WWAN device when there
are no more references.
Run tested with wwan_hwsim with NMEA support patches applied and
different port removing sequences.
Reported-by: Daniele Palmas <dnlplm@gmail.com>
Closes: https://lore.kernel.org/netdev/CAGRyCJE28yf-rrfkFbzu44ygLEvoUM7fecK1vnrghjG_e9UaRA@mail.gmail.com/
Suggested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20260126062158.308598-3-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was used initially for a port id allocation, then removed, and then
accidently introduced again, but it is still unused. Drop it again to
keep code clean.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-2-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mike Marciniszyn says:
====================
eth fbnic: Add debugfs for mbx and tx/rx
This patches adds debugfs read of the firmware mailbox tx/rx
and of the tx/rx rings for each napi vector.
====================
Link: https://patch.msgid.link/20260127200644.11640-1-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add debugfs hooks to display tx/rx rings for each napi
vector.
Note that the cloning mechanism in fbnic_ethtool.c for configuration
changes protects against concurrency issues with simultaneous config
changes along with debugs ring accesses.
The configuration switch builds up the new configuration offline,
takes the current config down, which removes the debugfs nv files, and
switches to the new configuration. The new configuration is brought
up which brings the debugfs files back on top of the new configuration
rings.
The interaction with fbnic_queue_stop() and fbnic_queue_start() will
similarly delete and add the files for the indicated vector.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260127200644.11640-3-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds reporting the Rx and Tx information
interfacing with the firmware.
The result of reading fbnic/fw_mbx is:
Rx
Rdy: 1 Head: 11 Tail: 10
Idx Len E Addr F H Raw
----------------------------------
00 4096 0 000101fea000 0 1 1000000101fea001
01 4096 0 000101feb000 0 1 1000000101feb001
.
.
.
15 4096 0 000101fe9000 0 1 1000000101fe9001
Tx
Rdy: 1 Head: 4 Tail: 4
Idx Len E Addr F H Raw
----------------------------------
00 0004 1 00010321b000 1 1 000440010321b003
01 0004 1 00010228d000 1 1 000440010228d003
.
.
.
15 0004 1 00010321b000 1 1 000440010321b003
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260127200644.11640-2-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Many USB network drivers define get_drvinfo functions which add no
value over usbnet_get_drvinfo, only setting the driver name and
version. usbnet_get_drvinfo automatically sets the driver name, and
separate driver versions are now frowned upon in the kernel. Remove all
driver versions and replace these get_drvinfo functions with references
to usbnet_get_drvinfo where possible. Where that is not possible,
remove unnecessary code to set the driver name. Also remove two
unnecessary initializations from aqc111_get_drvinfo, an inaccurate
comment in pegasus.c, and an unused macro in catc.c.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com> (for dm9601.c)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260129042435.13395-2-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the support to read the rx alignment errors and update
them in the standard rtnl_link_stats64 structure.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260129111520.1567097-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds SNMP drop count increment for the packets in
per NUMA queues which were introduced in commit b650bf0977
("udp: remove busylock and add per NUMA queues"). note that SNMP
counters are incremented currently by the caller for skb. And
that these skbs on the intermediate queue cannot be counted
there so need similar logic in their error path.
Signed-off-by: Mahdi Faramarzpour <mahdifrmx@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260129083806.204752-1-mahdifrmx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default, when a kmem_cache is created with SLAB_TYPESAFE_BY_RCU,
slub has to use extra storage for the freelist pointer after each
object, because slub assumes that any bit in the object
can be used by RCU readers.
Because proto_register() is also using SLAB_HWCACHE_ALIGN,
this forces slub to use one extra cache line per object.
We can instead put the slub freelist anywhere in the object,
granted the concurrent RCU readers are not supposed to
use the pointer value.
Add a new (struct sock)sk_freeptr field, in an union
with sk_rcu: No RCU readers would need to look at sk_rcu,
which is only used at free phase.
Tested:
grep . /sys/kernel/slab/TCP/{object_size,slab_size,objs_per_slab}
grep . /sys/kernel/slab/TCPv6/{object_size,slab_size,objs_per_slab}
Before:
/sys/kernel/slab/TCP/object_size:2368
/sys/kernel/slab/TCP/slab_size:2432
/sys/kernel/slab/TCP/objs_per_slab:13
/sys/kernel/slab/TCPv6/object_size:2496
/sys/kernel/slab/TCPv6/slab_size:2560
/sys/kernel/slab/TCPv6/objs_per_slab:12
After this patch, we can pack one more TCPv6 object per slab,
and object_size == slab_size.
/sys/kernel/slab/TCP/object_size:2368
/sys/kernel/slab/TCP/slab_size:2368
/sys/kernel/slab/TCP/objs_per_slab:13
/sys/kernel/slab/TCPv6/object_size:2496
/sys/kernel/slab/TCPv6/slab_size:2496
/sys/kernel/slab/TCPv6/objs_per_slab:13
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260129153458.4163797-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bhargava Marreddy says:
====================
bng_en: enhancements for RX and TX datapath
This series enhances the bng_en driver by adding:
1. Tx support (standard + TSO)
2. Rx support (standard + LRO/TPA)
====================
Link: https://patch.msgid.link/20260128185623.26559-1-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable TPA functionality in the VNIC and add functions
to handle TPA events, which help in processing LRO/GRO.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-9-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add AGG event handling in the RX path to receive packet data
on AGG rings. This enables Jumbo and HDS functionality.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-7-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add functions to support xmit along with TSO/GSO.
Also, add functions to handle TX completion events in the NAPI context.
This commit introduces the fundamental transmit data path
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul-rg.gupta@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-5-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since the HWRM completion for a sent request lands on the NQ,
add functions to handle the HWRM completion event.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-4-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to receive packet using NAPI, build and deliver the skb
to stack. With help of meta data available in completions, fill the
appropriate information in skb.
Signed-off-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Reviewed-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Rajashekar Hudumula <rajashekar.hudumula@broadcom.com>
Reviewed-by: Ajit Kumar Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Rahul Gupta <rahul-rg.gupta@broadcom.com>
Link: https://patch.msgid.link/20260128185623.26559-3-bhargava.marreddy@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to Lantech 8330-262D-E, the Lantech 8330-265D also reports
2500MBd instead of 3125MBd.
Also, all 8330-265D report normal RX_LOS in EEPROM, but some signal
inverted RX_LOS. We therefore need to ignore RX_LOS on these modules.
Signed-off-by: Marek Behún <kabel@kernel.org>
Link: https://patch.msgid.link/20260128170044.15576-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch updates the count_eot calculation for CN20K devices.
Where the count_eot feild extended to 2 bits, while maintaining
CN10K compatibility where only bit 0 is used.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260128022448.4402-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
-----BEGIN PGP SIGNATURE-----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=70Rs
-----END PGP SIGNATURE-----
Merge tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
Another fairly large set of changes, notably:
- cfg80211/mac80211
- most of EPPKE/802.1X over auth frames support
- additional FTM capabilities
- split up drop reasons better, removing generic RX_DROP
- NAN cleanups/fixes
- ath11k:
- support for Channel Frequency Response measurement
- ath12k:
- support for the QCC2072 chipset
- iwlwifi:
- partial NAN support
- UNII-9 support
- some UHR/802.11bn FW APIs
- remove most of MLO/EHT from iwlmvm
(such devices use iwlmld)
- rtw89:
- preparations for RTL8922DE support
* tag 'wireless-next-2026-01-29' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (184 commits)
wifi: iwlegacy: add missing mutex protection in il4965_store_tx_power()
wifi: iwlegacy: add missing mutex protection in il3945_store_measurement()
wifi: mac80211: use u64_stats_t with u64_stats_sync properly
wifi: p54: Fix memory leak in p54_beacon_update()
wifi: cfg80211: treat deprecated INDOOR_SP_AP_OLD control value as LPI mode
wifi: rtw88: sdio: Migrate to use sdio specific shutdown function
wifi: rsi: sdio: Migrate to use sdio specific shutdown function
sdio: Provide a bustype shutdown function
wifi: nl80211/cfg80211: support operating as RSTA in PMSR FTM request
wifi: nl80211/cfg80211: add negotiated burst period to FTM result
wifi: nl80211/cfg80211: clarify periodic FTM parameters for non-EDCA based ranging
wifi: nl80211/cfg80211: add new FTM capabilities
wifi: iwlwifi: rename struct iwl_mcc_allowed_ap_type_cmd::offset_map
wifi: iwlwifi: mvm: Remove link_id from time_events
wifi: iwlwifi: mld: change cluster_id type to u8 array
wifi: iwlwifi: support V13 of iwl_lari_config_change_cmd
wifi: iwlwifi: split bios_value_u32 to separate the header
wifi: iwlwifi: uefi: cache the DSM functions
wifi: iwlwifi: acpi: cache the DSM functions
wifi: iwlwifi: mvm: Cleanup MLO code
...
====================
Link: https://patch.msgid.link/20260129110136.176980-39-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bjørn Mork says:
====================
Airoha AN8811HB 2.5 Gbps phy support
The RFC patch posted earlier has been split into a series based on the
feedback received:
1/3: preparing the EN8811H driver for maximum reuse
2/3: adding support for the new AN8811HB hardware
3/3: adding (optional) clock driver for AN8811HB
Patch 3/3 is not required for a functional device. It is included here
for full feature parity between the EN8811H and AN8811HB drivers.
The AN8811HB phy requires new firmware, which is now available with
the 20260110 release of linux-firmware,
====================
Link: https://patch.msgid.link/20260127125547.1475164-1-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement clk provider driver so we can disable the clock output when it
isn't needed. This helps to reduce EMF noise
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20260127125547.1475164-4-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Airoha AN8811HB is mostly compatible with the EN8811H, adding 10Base-T
support and reducing power consumption.
This driver is based on the air_an8811hb v0.0.4 out-of-tree driver
written by "Lucien.Jheng <lucien.jheng@airoha.com>"
Firmware is available in linux-firmware. The driver has been tested with
firmware version 25110702
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Link: https://patch.msgid.link/20260127125547.1475164-3-bjorn@mork.no
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver now depends on the core to tell it what the rx page size
should be for the agg ring. We must populate the ndo_default_qcfg
callback even if we don't support any queue ops.
This fixes:
Oops: divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
RIP: 0010:bnxt_alloc_rx_page_pool (drivers/net/ethernet/broadcom/bnxt/bnxt.c:3852)
with fw version 225.1.109.0.
Link: https://lore.kernel.org/20250421222827.283737-20-kuba@kernel.org
Fixes: f96e1b3577 ("eth: bnxt: support qcfg provided rx page size")
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260128193258.125274-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fan Gong says:
====================
net: hinic3: Fix code styles
This patchset provides 4 code styles fixes:
Remove empty lines between error handling.
Remove defensive txq_num check.
Use array_size instead of multiplying.
SQ use SQ_CTXT_PREF_CI_HI to improve readability.
====================
Link: https://patch.msgid.link/cover.1769656467.git.zhuyikai1@h-partners.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fl6_update_dst() is called for every TCP (and others) transmit,
and is a nop for common cases.
Split it in two parts :
1) fl6_update_dst() inline helper, small and fast.
2) __fl6_update_dst() for the exception, out of line.
Small size increase to get better TX performance.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 2/2 grow/shrink: 8/0 up/down: 296/-125 (171)
Function old new delta
__fl6_update_dst - 104 +104
rawv6_sendmsg 2244 2284 +40
udpv6_sendmsg 3013 3043 +30
tcp_v6_connect 1514 1534 +20
cookie_v6_check 1501 1519 +18
ip6_datagram_dst_update 673 690 +17
inet6_sk_rebuild_header 499 516 +17
inet6_csk_route_socket 507 524 +17
inet6_csk_route_req 343 360 +17
__pfx___fl6_update_dst - 16 +16
__pfx_fl6_update_dst 16 - -16
fl6_update_dst 109 - -109
Total: Before=22570304, After=22570475, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260128185548.3738781-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NIX SQ manager sticky mode is known to cause stalls when multiple SQs
share an SMQ and transmit concurrently. Additionally, PSE may deadlock
on transitions between sticky and non-sticky transmissions. There is
also a credit drop issue observed when certain condition clocks are
gated.
work around these hardware errata by:
- Disabling SQM sticky operation:
- Clear TM6 (bit 15)
- Clear TM11 (bit 14)
- Disabling sticky → non-sticky transition path that can deadlock PSE:
- Clear TM5 (bit 23)
- Preventing credit drops by keeping the control-flow clock enabled:
- Set TM9 (bit 21)
These changes are applied via NIX_AF_SQM_DBG_CTL_STATUS. With this
configuration the SQM/PSE maintain forward progress under load without
credit loss, at the cost of disabling sticky optimizations.
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127125147.1642-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The test_rss_flow_label_6only test case fails on devices that do not
support IPv6 flow label hashing. Make it skip neatly, consistent with
the behavior of the test_rss_flow_label case.
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20260128090217.663366-1-noren@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: rk: second chunk of cleanups
This series is a cut-down installment of the dwmac-rk cleanups, covering
up to the point that the AI review had its first issue with the patches.
Unfortunately, this means that we introduce ->init but do not add any
users for it yet. That will be in the next round once this has got
through AI review and merged.
====================
Link: https://patch.msgid.link/aXnrzIbZN-gaZTia@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All the definitions of the RGMII related xxx_GMAC_CLK_xxx definitions
use the same field values to select the clock rate. Provide common
definitions for these field values, passing them in to a single macro
for each variant that generates the appropriate values for the speed
register.
No change to produced code on aarch64.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vl3G0-00000006v3R-2ZBc@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rk_gmac_setup() delves into the PHY's DT node to retrieve its reset
control using of_reset_control_get(). However, it never releases it
when the driver is removed. Add reset_control_put() to rk_gmac_exit()
to clean this up.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patch.msgid.link/E1vl3Fv-00000006v3L-215v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: report active phy interface
The original patch needs dwmac-thead fixed so the PHY_INTF* definitions
do not clash.
====================
Link: https://patch.msgid.link/aXnpTy6XckPGcmg0@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the active PHY interface from the point of view of the dwmac
hardware to the kernel log, where the core supports reading this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vl36F-00000006url-1fWA@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid conflicts between stmmac PHY_INTF_* and GMAC_INTF_CTRL register
definitions by replacing the PHY_ prefix with GMAC_.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vl36A-00000006urf-19ox@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 9b443e58a8 ("net: stmmac: qcom-ethqos: remove MAC_CTRL_REG
modification"), ethqos->mac_base is only written, never read. Let's
remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vl39x-00000006uvc-0A3S@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The closing #endif comment in otx2_devlink.h refers to RVU_DEVLINK_H,
but the actual header guard is OTX2_DEVLINK_H.
Fix the comment to match the correct header guard name.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260127174333.1247747-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the dpll subsystem exports the fractional frequency offset
(FFO) in parts per million (ppm). This granularity is insufficient for
high-precision synchronization scenarios which often require parts per
trillion (ppt) resolution.
Add a new netlink attribute DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET_PPT
to expose the FFO in ppt.
Update the dpll netlink core to expect the driver-provided FFO value
to be in ppt. To maintain backward compatibility with existing userspace
tools, populate the legacy DPLL_A_PIN_FRACTIONAL_FREQUENCY_OFFSET
attribute by dividing the new ppt value by 1,000,000.
Update the zl3073x and mlx5 drivers to provide the FFO value in ppt:
- zl3073x: adjust the fixed-point calculation to produce ppt (10^12)
instead of ppm (10^6).
- mlx5: scale the existing ppm value by 1,000,000.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://patch.msgid.link/20260126162253.27890-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch moves netconsole selftests from drivers/net to its own target
in drivers/net/netconsole.
This change helps saving some resources from CI since tests in
drivers/net automatically run against real hardware which are not used
by netconsole tests as they rely solely on netdevsim.
lib_netcons.sh is kept under drivers/net/lib since it is also used by
bonding selftests. Finally, drivers/net config remains unchanged as
netpoll_basic.py requires netconsole (and does leverage real HW testing).
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Link: https://patch.msgid.link/20260127-netcons-selftest-target-v2-1-f509ab65b3bc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
