Make the complicated interrupt-map property (with multiple '0' entries)
a bit more readable by using known define for GIC_SPI.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260407201839.25759-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Wi-Fi firmware used on Xiaomi Poco F1 (beryllium) phone doesn't
support the host-capability QMI request, so add a quirk to skip it on
this device.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260407-skip-host-cam-qmi-req-v5-3-dfa8a05c6538@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing QSPI-to-memory interconnect path alongside the existing
configuration path. Without this path, the interconnect framework cannot
correctly vote for the bandwidth required by QSPI DMA data transfers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429-spi-nor-v5-7-993016c9711e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing QSPI-to-memory interconnect path alongside the existing
configuration path. Without it, the interconnect framework cannot vote for
the bandwidth required by QSPI DMA data transfers.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429-spi-nor-v5-6-993016c9711e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The QCS615 Ride board has a SPI-NOR flash connected to the QSPI controller
on CS0. Enable the QSPI controller and add the corresponding SPI-NOR flash
node to allow the system to access it.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429-spi-nor-v5-5-993016c9711e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Talos (QCS615) platform includes a QSPI controller used for accessing
external flash storage. Add the QSPI OPP table, TLMM pinmux entries, and
the QSPI controller node to enable support for this hardware.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260429-spi-nor-v5-4-993016c9711e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
On almost all Qualcomm platforms, including Glymur, there is a Crypto
engine IP block to which the CPU can off-load cryptographic computations
for achieving acceleration.
The engine is also DMA capable due to the presence of an associated Bus
Access Manager (BAM) module.
Describe the Crypto engine and its BAM.
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260505-glymur_crypto_enablement-v2-2-bf115aeb1459@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add nodes for the BAM DAM and QCE crypto engine.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260407-crypto-qcom-eliza-v1-2-40f61a1454a2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add additional OPP entries for the Agatti platform to support higher
operating frequencies as specified in the hardware documentation.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260507-iris-ar50lt-v1-16-d22cccedc3e2@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This change enables DP controllers, DPTX0 and DPTX1 alongside
their corresponding PHYs of mdss1 which corresponds to edp2
and edp3.
Signed-off-by: Mani Chandana Ballary Kuntumalla <quic_mkuntuma@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260402095003.3758176-3-quic_mkuntuma@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the FastRPC node to enable offloading compute tasks to the ADSP
via the FastRPC framework.
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260403120753.105869-1-mitltlatltl@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the MCP2518FD CAN controller on the QCS6490 RB3 Gen2 platform.
The controller is connected via SPI3 and uses a 40 MHz oscillator.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260403-can-spi-kodiak-dtsi-v1-1-4055e67dd3fc@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Motorola Edge 30 is a smartphone released in 2022.
This commit has the following features working:
- Display (simplefb)
- Touchscreen
- Power and volume buttons
- Storage (UFS 3.1)
- Battery (ADSP battmgr)
- USB (Type-C, 2.0, dual-role)
- Wi-Fi and Bluetooth (WCN6750 hw1.0)
Signed-off-by: Val Packett <val@packett.cool>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260403054417.167917-2-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Motorola Edge 30 (motorola,dubai) is a smartphone based on the
SM7325 SoC.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Val Packett <val@packett.cool>
Link: https://lore.kernel.org/r/20260403054417.167917-1-val@packett.cool
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
We know these devices are present; most of them are supported by
downstream and are close to the mainline kernels.
This adds placeholders for:
- front camera (imx371)
- rear cameras (imx519, imx376k)
- actuators
This is very handy when rebasing the integration tree with
support for multiple different blocks at the same time.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406-placeholders-v2-1-9cdbe1fc9666@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable USB support on Kaanapali QRD variant. Enable USB controller in
device mode till glink node is added.
Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406174613.3388987-4-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable USB support on Kaanapali MTP variant. Enable USB controller in
device mode till glink node is added.
Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406174613.3388987-3-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the base USB devicetree definitions for Kaanapali platform. The overall
chipset contains a single DWC3 USB3 controller (rev. 200a), SS QMP PHY
(rev. v8) and M31 eUSB2 PHY.
Signed-off-by: Ronak Raheja <ronak.raheja@oss.qualcomm.com>
Signed-off-by: Jingyi Wang <jingyi.wang@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406174613.3388987-2-krishna.kurapati@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the generic "xiaomi,beryllium" compatible string after the
panel-specific one, so the compatible list follows the required
ordering from most specific to most generic.
This allows userspace to fall back to the generic Poco F1 compatible
when no panel-specific match is present. In particular, hexagonrpcd
relies on trying all compatible entries to derive the HexagonFS path,
and currently fails when the generic device string is missing.
This change modifies the DT ABI: systems describing the EBBG variant
will now also match on "xiaomi,beryllium", whereas previously only
the panel-specific compatible was exposed.
In practice, no upstream userspace distinguishes between Tianma and
EBBG panel variants. All known consumers rely only on the generic
device identification, and no panel-specific handling exists.
Therefore, enabling the generic fallback does not change effective
runtime behavior, but fixes userspace that depends on generic matching.
The previous state was incomplete, as it omitted the generic
device-compatible string required for proper fallback matching.
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260405-beryllium-compat-string-v2-2-91149be07835@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the panel-specific compatible string for the Tianma variant
of the Xiaomi Poco F1:
- "xiaomi,beryllium-tianma"
and require the generic fallback compatible:
- "xiaomi,beryllium"
Update the binding to clarify that all panel variants must list the
variant-specific compatible first, followed by the generic device
compatible, in accordance with DT matching rules.
The previous binding documentation did not describe the Tianma variant
and did not clearly specify the required fallback compatible, which
resulted in inconsistent DTS implementations.
No functional differences are currently exposed between Tianma and EBBG
variants at the binding level; both rely on the same generic device
compatibility for software support.
Signed-off-by: David Heidelberg <david@ixit.cz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260405-beryllium-compat-string-v2-1-91149be07835@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is no suspend state in the mainline kernel, use the sleep state
intended for this purpose.
Fixes: 4588245915 ("arm64: dts: qcom: sdm845: add device tree for SHIFT6mq")
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260403-oneplus-nfc-v3-3-fbdce57d63c1@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable NFC controller NXP PN553, which is part of the package NXP NQ330
(NFC + eSE).
Based on work of biemster <l.j.beemster@gmail.com>.
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260403-oneplus-nfc-v3-2-fbdce57d63c1@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The temp-alarm driver probe is failing for the pmh0104 PMICs on glymur.
[ 3.999713] spmi-temp-alarm c426000.spmi:pmic@8:temp-alarm@a00: error -ENODEV: failed to register sensor
[ 4.015066] spmi-temp-alarm c426000.spmi:pmic@9:temp-alarm@a00: error -ENODEV: failed to register sensor
[ 4.033908] spmi-temp-alarm c437000.spmi:pmic@b:temp-alarm@a00: error -ENODEV: failed to register sensor
This happens because thermal zone associated with the temp alarm was
defined under the thermal zones parent node which had a typo (used `_` in
place of `-`). Correct the typo to fix probe failure.
Fixes: 41b6e8db40 ("arm64: dts: qcom: Introduce Glymur base dtsi")
Signed-off-by: Kamal Wadhwa <kamal.wadhwa@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260406-glymur-pmh0104-temp-alarm-fix-v1-1-4441b7b01f85@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct the unit address of USB nodes in Qualcomm IPQ5424 SoC DTSI to
fix W=1 DTC warnings:
ipq5424.dtsi:642.22-693.5: Warning (simple_bus_reg): /soc@0/usb2@1e00000: simple-bus unit address format error, expected "1ef8800"
ipq5424.dtsi:733.22-786.5: Warning (simple_bus_reg): /soc@0/usb3@8a00000: simple-bus unit address format error, expected "8af8800"
Fixes: 113d52bdc8 ("arm64: dts: qcom: ipq5424: Add USB controller and phy nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260405-dts-qcom-w-1-fixes-v2-3-1f2c7b74a93f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct the unit address of USB node in Qualcomm Glymur SoC DTSI to fix
W=1 DTC warning:
glymur.dtsi:4027.23-4093.5: Warning (simple_bus_reg): /soc@0/usb@a2f8800: simple-bus unit address format error, expected "a200000"
Fixes: 4eee57dd4d ("arm64: dts: qcom: glymur: Add USB related nodes")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260405-dts-qcom-w-1-fixes-v2-1-1f2c7b74a93f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This node has no 'reg' property, so it shouldn't have a unit address
(after '@') either
Fixes: b0d5c96e86 ("arm64: dts: qcom: sdm845-oneplus: Add framebuffer")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260402-beryllium-fb-v4-2-46170004da28@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add framebuffer for early console and u-boot support.
Signed-off-by: Petr Hodina <petr.hodina@protonmail.com>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260402-beryllium-fb-v4-1-46170004da28@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The Sony IMX355 is the front camera on the Pixel 3a, mounted in portrait
mode. It is connected to CSIPHY1 and CCI I2C1, and uses MCLK2. Add
support for it.
Co-developed-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260331194437.41041-4-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The camera subsystem is added for the SoC common devicetree, but the
mclk pins should also be common across the SoC. Add the mclk pins for
the cameras.
Suggested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/5135823c-f2e4-4873-9e3a-9d190cac0113@oss.qualcomm.com
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Reviewed-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20260331194437.41041-3-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Endpoints cannot be pre-defined since commit dcf6fb89e6 ("media: qcom:
camss: remove a check for unavailable CAMSS endpoint") was applied,
probing all endpoint nodes and requiring them to have a remote. There is
no sensible remote in the SoC devicetree because camera sensors are
board-specific.
The ports are meant to be extended by a board devicetree in order to
define fully configured endpoints and connect the ports to camera
sensors. For nodes that are only meaningful if extended, labels are
usually assigned. Label these ports so they can be extended directly.
Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20260331194437.41041-2-mailingradian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Make the dt checker happy by filling out the required properties in
line with the schematics.
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260225-topic-wcn6855_pmu_dtbdings-v3-10-576ec5c4e631@oss.qualcomm.com
[bjorn: Remove reference to dropped 12V supply]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix up the supply name to align with bindings.
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260225-topic-wcn6855_pmu_dtbdings-v3-9-576ec5c4e631@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Fix up the supply name to align with bindings.
Reviewed-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260225-topic-wcn6855_pmu_dtbdings-v3-8-576ec5c4e631@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
