The 1Ah M80H SoC uses a different set of SMU mailbox register offsets
compared to the existing 1Ah variants: message at 0xA10, argument at
0xA18, and response at 0xA14.
Add amd_1ah_m80_cpu_info with these offsets, wire it into the PCI ID
table via PCI_DEVICE_DATA(), populate scratch_reg field with
AMD_PMC_SCRATCH_REG_1AH and add the corresponding ACPI ID AMDI000C.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609143952.2999707-3-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace the scattered per-field assignments in amd_pmc_get_ip_info() with
a single amd_pmc_cpu_info struct capturing all SoC-specific parameters
such as SMU offsets, IP block table, and OS hint.
Define static const instances per SoC variant and embed them as driver_data
in the PCI ID table via PCI_DEVICE_DATA(). Consolidate pci_match_id() into
amd_pmc_set_cpu_info(), which assigns driver_data directly to cpu_info,
the switch falls through only for 1Ah M20H/M60H variants requiring
boot_cpu_data.x86_model detection to distinguish the M70 sub-variant.
Add scratch_reg to amd_pmc_cpu_info and populate it for each SoC
variant, allowing amd_pmc_idlemask_read() to drop its cpu_id switch
in favour of a single cpu_info->scratch_reg lookup.
Move dev->cpu_id assignment into amd_pmc_set_cpu_info() so it is valid
before the switch statement. Handle SP/SHP directly in the switch since
their NULL driver_data bypasses the early return, and remove the duplicate
check from probe.
Remove amd_pmc_get_os_hint() and use cpu_info->os_hint directly at call
sites and rename AMD_CPU_ID_* to PCI_DEVICE_ID_AMD_CPU_ID_* with backward
compatibility aliases.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Co-developed-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Sanket Goswami <Sanket.Goswami@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260609143952.2999707-2-Shyam-sundar.S-k@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The volume rocker buttons on the HP ProBook x360 440 G1 convertible emit
events 0xc4-0xc7 via the intel-hid ACPI device (INT33D5). These codes are
only present in intel_array_keymap, which is used when the "5 button
array" input device exists. On this machine button_array_present()
returns false because the firmware does not advertise the array through
the HEBC method, so notify_handler() routes the events to a NULL
priv->array and they are dropped as "unknown event 0xc4". As a result
the side volume keys do nothing.
Add the machine to button_array_table so the array device is created and
the volume rocker emits KEY_VOLUMEUP / KEY_VOLUMEDOWN. This is equivalent
to booting with the enable_5_button_array=1 module parameter, which was
used to confirm the fix on the affected hardware.
Signed-off-by: Nikolay Metchev <nikolaymetchev@gmail.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260609213309.445019-1-nikolaymetchev@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert the explicit mutex_lock/mutex_unlock pair in mem_write() into
a cleanup.h guard(mutex)() scope-based lock acquisition. This removes
the remaining goto-based cleanup path and keeps the lock held until
the end of the mem_write() scope.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://patch.msgid.link/20260521130848.2860219-2-zhaojinming@uniontech.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
With tab=8 (Linux Kernel coding style), there are a couple of lines
misaligned in the comment ASCII tables. Fix indentation for them.
Signed-off-by: Shawn Guo <shengchao.guo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260608082348.92575-1-shengchao.guo@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-ap0xxx (board ID: 8E35) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_legacy_thermal_params.
Testing on board 8E35 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Ahmet Öztürk <sivasli-ahmet@gmx.de>
Reported-by: Ahmet Öztürk <sivasli-ahmet@gmx.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221523
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260608134255.36280-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the firmware string '1583EMS1.109' to the ALLOWED_FW_10 array.
This enables Embedded Controller support, including battery charge
thresholds, for the MSI Pulse GL66 12UEK (MS-1583) laptop.
Signed-off-by: Luis de Carlos <reskoldo73@gmail.com>
Link: https://patch.msgid.link/20260527134750.25263-1-reskoldo73@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Inspiron N5110 needs the touchpad LED quirk (Vostro V130 quirk)
to properly control the touchpad LED. Add its DMI identifier
to the existing quirk table, next to the similar Inspiron M5110 entry.
Tested on Dell Inspiron N5110.
The touchpad LED works correctly with this quirk enabled.
Signed-off-by: Gleb Sonichev <sonichev555@gmail.com>
Acked-by: Pali Rohár <pali@kernel.org>
Link: https://patch.msgid.link/20260525100047.20046-1-sonichev555@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-ap0xxx (board ID: 8D26) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_legacy_thermal_params.
Testing on board 8D26 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Alberto Escaño <alberto_e_88@yahoo.es>
Reported-by: Alberto Escaño <alberto_e_88@yahoo.es>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221514
Cc: stable@vger.kernel.org # v6.18+
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260525102226.56300-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
convert_ltr_scale() emits an unconditional pr_warn() whenever an LTR row
encoded by hardware has a scale-factor field of 6 or 7 (reserved values
per the PCIe LTR ECN). The function is called twice per LTR row (snoop
+ non-snoop) by pmc_core_ltr_show(), which is invoked on every read of
/sys/kernel/debug/pmc_core/ltr_show as well as during certain platform
driver activity.
On a Meteor Lake laptop with an Intel AX210 Wi-Fi card, this produces
4-12 "Invalid LTR scale factor." lines per second in dmesg, with no
context to help identify which PMC IP / row carries the bad value.
Switch to pr_warn_once() so the warning still flags the spec violation
once per boot, and include the offending scale value in the message.
Identifying the originating LTR row would require restructuring the
caller's loop to perform the validity check itself; that is left as a
separate change.
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Mike Bommarito <michael.bommarito@gmail.com>
Link: https://patch.msgid.link/20260523114517.101305-1-michael.bommarito@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Added thermal support for board ID 8B2F.
Signed-off-by: yahia ahmed <yahia.a.abdrabou@gmail.com>
Link: https://patch.msgid.link/20260522203418.28784-1-yahia.a.abdrabou@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In mem_write(), the temporary array returned by
parse_int_array_user() must be released on all exit paths.
Convert the array variable to use cleanup.h scope-based
cleanup so it is freed automatically on return.
This also moves the array declaration next to
parse_int_array_user() as required by cleanup.h usage
guidelines.
Fixes: 8e0a2fc68e ("platform/x86/intel/tpmi: Use 32 bit aligned address for debugfs mem write")
Cc: stable@vger.kernel.org
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://patch.msgid.link/20260521130848.2860219-1-zhaojinming@uniontech.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
OneXPlayer Super X identifies itself via DMI as:
board vendor: ONE-NETBOOK
board name: ONEXPLAYER SUPER X
product name: ONEXPLAYER SUPER X
Current mainline oxpec does not contain a matching DMI entry for this
system, so the in-tree driver is not auto-loaded.
The tested Super X fan, PWM, turbo-toggle, and battery charge-control EC
layout matches the existing ONEXPLAYER G1 A handling.
Add a DMI match for OneXPlayer Super X and reuse the oxp_g1_a board data.
Reviewed-by: Derek J Clark <derekjohn.clark@gmail.com>
Reviewed-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Alexander Egorov <begeebe@gmail.com>
Link: https://patch.msgid.link/20260519155124.3240359-1-begeebe@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Both ARM and ARM64 which are a dependency for CHROME_PLATFORMS have
seldomly used big-endian variants.
The ChromeOS EC framework and drivers are written under the assumption
that they will be running on a little-endian systems. Code which would
be broken on big-endian can be found trivially.
Some examples:
cros_ec.c: suspend_params.sleep_timeout_ms = ec_dev->suspend_timeout_ms
cros_ec_debugfs.c: resp->time_since_ec_boot_ms
cros_ec_wdt.c: arg.req.reboot_timeout_sec = wdd->timeout
Prevent the build for big-endian systems.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20260531-cros-big-endian-v1-2-0cc90f39c636@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Add a SAM client device node group and registry entry for the
Microsoft Surface Pro, 12-inch with Snapdragon.
This set enables the use of the following devices.
1: cover keyboard
2: cover touchpad
3: pen stash events.
The battery info and charger info devices have been
purposefully omitted as they are also reported by
other drivers and cause conflicts.
Signed-off-by: Harrison Vanderbyl <harrison.vanderbyl@gmail.com>
Link: https://patch.msgid.link/ab458aadea651396d9ea7629419a32dc7510c593.1778822464.git.harrison.vanderbyl@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently the code enqueue work items using {queue|mod}_delayed_work(),
using system_wq, which will be deprecated soon and replaced by
system_percpu_wq.
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
The function(s) mentioned earlier, end up calling __queue_delayed_work(),
which set a global timer that could fire anywhere, enqueuing the work
where the timer fired.
Unbound works could benefit from scheduler task placement, to optimize
performance and power consumption.
Since the workqueue work doesn't rely on per-cpu variables, there is no
obvious reason that justify the use of a per-cpu workqueue. So change
system_wq with system_dfl_wq so that the work may benefit from
scheduler task placement.
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260515145851.318787-1-marco.crivellari@suse.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled array, only its representation in
source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260519154040.1594878-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
While touching all these arrays, unify usage of whitespace in the list
terminator.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://patch.msgid.link/20260519144341.1589034-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo GameZone/Other interfaces have some delicate divergences
among different devices. When making a bug report or adding support for
new devices/interfaces, capdata is the most important information to
cross-check with.
Add a debugfs file (lenovo_wmi/<device_name>/capdata), so that users can
dump capdata and include it in their reports.
Since `struct capdata01' is just an extension to `struct capdata00',
also convert the former to include the latter anonymously
(-fms-extensions, since v6.19). This is declared as a union in the
capdata01 struct, with both the anonymous declaration and as a named
member to avoid type casting when passing just the capdata00 struct
pointer.
Tested-by: Kurt Borja <kuurtb@gmail.com>
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
We are about to add debugfs support for lenovo-wmi-capdata. Let's setup
a debugfs directory called "lenovo_wmi" for tidiness, so that any
lenovo-wmi-* device can put its subdirectory under the directory.
Subdirectories will be named after the corresponding WMI devices.
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some Lenovo BIOS have been shown to have incomplete and/or broken
capability data and WMI attribute IDs. In some cases the capability data
reports that a feature is not supported when the get/set methods are
fully implemented. It is also possible that the ACPI methods from the
ideapad_laptop driver we defer to could be bugged while the WMI method
is fully working. To aid end users in submitting more complete bug
reports in these situations, add an override to skip the ACPI and
compatibility checks to force load the power supply extension as if it
is fully supported and has no conflicts.
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add charge_behaviour and charge_types attributes through a power supply
extension for devices that support WMI based charge enable & disable.
Lenovo Legion devices that implement WMI function and capdata ID
0x03010001 in their BIOS are able to enable or disable charging at 80%
through the lenovo-wmi-other interface. Add a charge_types attribute for
BATX devices to expose this capability with Standard and Long_Life types
enabled.
Additionally, devices that support WMI function and capdata ID 0x03020000
are able to force discharge of the battery. Expose this capability with
a charge_behaviour attribute in the power supply extension, with the auto
and force-discharge behaviors enabled. The GET method for this attribute
is bugged. After analyzing the DSDT, and some testing, it appears the
method grabs bit(3) instead of bit(4) from the EC register that stores the
current status, and will only report if charging has been inhibited or
not. To work around this, store and report the last setting written to the
attribute.
As some devices only expose one attribute or the other, a bitmask is
added with a lookup table and some helper macros to select the correct
configuration for the hardware at runtime.
The ideapad_laptop driver provides the charge_types attribute to provide
similar functionality. When the WMI method is set this can corrupt the
ACPI method return and cause hardware and driver errors. To avoid
conflicts between the drivers, we get the acpi_handle and do the same
check that ideapad_laptop does when it enables the feature. If the
feature is supported in ideapad_laptop, abort adding the extension from
lenovo-wmi-other. The ACPI method is more reliable when both are
present from my testing, so we can prefer that implementation and do
not need to worry about de-conflicting from inside that driver.
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In the next patch a power supply extension is added which requires
a name attribute. Instead of creating another const macro with the
same information, rename LWMI_OM_FW_ATTR_BASE_PATH to
LWMI_OM_SYSFS_NAME.
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-4-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use an enum for all GPU attribute feature ID's and add GPU attributes.
Reviewed-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use an enum for all device ID's and CPU attribute feature ID's,
add missing CPU attributes.
Reviewed-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260520060740.119554-2-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
If the DW5826e is in a frozen state and unable to receive USB commands,
this driver provides a method for the user to reset the DW5826e via ACPI.
E.g: echo 1 > /sys/bus/platform/devices/PALC0001\:00/wwan_reset
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Jack Wu <jackbb_wu@compal.com>
Link: https://patch.msgid.link/20260526-dell-reset-v8-v8-1-d3a29cb4cf2f@compal.com
[ij: removed default m]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enable battery charge modes on supported TUXEDO devices by adding the
feature bit to the respective device descriptors.
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260512232145.329260-9-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Many Uniwill-based devices do not supports the already existing
charge limit functionality, but instead support an alternative
interface for controlling the battery charge algorithm.
Add support for this interface and update the documentation.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-8-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turned out that EC_ADDR_OEM_4 also contains bits with a volatile
nature. Mark the whole register as volatile to prepare for the usage
of said bits. This also means that we now have to save/restore the
touchpad toggle state ourself.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-7-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently the suspend handling for the FN lock and super key enable
features saves the whole values of the affected registers instead of
the individual feature state. This duplicates the register access
logic from the associated sysfs attributes.
Rework the suspend handling to reuse said register access logic and
only store the individual feature state as a boolean value.
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-6-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Introduce a rwsem for protecting `ec_dev` to prevent Use-After-Free on
the `ec_dev`.
- Writers: In driver's probe() and remove().
- Readers: In file operations.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20260525052654.4076429-5-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Introduce an event relayer mechanism. Instead of each open file
registering directly with `ec_dev->event_notifier`, the platform device
registers a single relayer notifier. Individual files then register
with a local subscribers list in `chardev_pdata`.
This allows the driver to safely disconnect from the event chain
`ec_dev->event_notifier` during cros_ec_chardev_remove(), preventing
events from being delivered to open files after the device is removed,
while still allowing those files to be closed safely later.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20260525052654.4076429-4-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Move `ec_dev` and `cmd_offset` from `chardev_priv` to `chardev_pdata` as
they are per-device properties but not per-open-file properties.
Hold a reference to `chardev_pdata` for each open file to ensure the
data remains valid even if the underlying platform device is removed.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20260525052654.4076429-3-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Introduce struct chardev_pdata to hold platform driver data.
The platform driver data is allocated by kzalloc() instead of devm
variant, allowing for managed cleanup that can eventually extend beyond
device removal if files are still open.
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20260525052654.4076429-2-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Fixes and New HW Support
- Add ACPI_HANDLE()/ACPI_COMPANION() NULL checks (many drivers) to
handle match overrides gracefully
- asus-armoury:
- Fix mini-LED mode get/set
- Add support for FA401EA, FX607VU, G614FR, and GU605CP
- bitland-mifs-wmi: Add CONFIG_LEDS_CLASS dependency
- hp-wmi: Add thermal support for Omen 16-c0xxx (board 8902)
- intel/vsec: Fix enable_cnt imbalance due to PCIe error recovery
- surface/aggregator_registry: Remove battery & AC nodes on Surface
Laptop 7 to avoid duplicated devices
- uniwill-laptop:
- Handle uninitialized and invalid charging threshold values
- Accept charging threshold of 0 through power supply sysfs ABI and
clamp it to 1
- Make 'force' parameter to work also when device descriptor is found
- Do not enable charging limit despite the 'force' parameter to avoid
permanent damage to battery
The following is an automated shortlog grouped by driver:
acer-wireless:
- Check ACPI_COMPANION() against NULL
adv_swbutton:
- Check ACPI_HANDLE() against NULL
asus-armoury:
- add support for FA401EA
- add support for FX607VU
- add support for G614FR
- add support for GU605CP
- fix mini-LED mode get/set on MODE2 devices
asus-laptop:
- Check ACPI_COMPANION() against NULL
bitland-mifs-wmi:
- add CONFIG_LEDS_CLASS dependency
dell/dell-rbtn:
- Check ACPI_COMPANION() against NULL
eeepc-laptop:
- Check ACPI_COMPANION() against NULL
fujitsu:
- Check ACPI_COMPANION() against NULL
fujitsu-tablet:
- Check ACPI_COMPANION() against NULL
hp_accel:
- Check ACPI_COMPANION() against NULL
hp-wmi:
- fix support for thermal profile Omen 16-с0xxx laptops
intel-hid:
- Check ACPI_HANDLE() against NULL
intel/rst:
- Check ACPI_COMPANION() against NULL
intel_sar:
- Check ACPI_HANDLE() against NULL
intel/smartconnect:
- Check ACPI_HANDLE() against NULL
intel-vbtn:
- Check ACPI_HANDLE() against NULL
intel/vsec:
- Fix enable_cnt imbalance on PCIe error recovery
lg-laptop:
- Check ACPI_COMPANION() against NULL
panasonic-laptop:
- Check ACPI_COMPANION() against NULL
sony-laptop:
- Check ACPI_COMPANION() against NULL
surface: aggregator_registry:
- omit battery & AC nodes on Surface Laptop 7
surface: surfacepro3_button:
- Check ACPI_COMPANION()
system76:
- Check ACPI_COMPANION() against NULL
toshiba_acpi:
- Check ACPI_COMPANION() against NULL
toshiba_bluetooth:
- Check ACPI_COMPANION() against NULL
toshiba_haps:
- Check ACPI_COMPANION() against NULL
uniwill-laptop:
- Accept charging threshold of 0
- Do not enable the charging limit even when forced
- Fix behavior of "force" module param
- Properly initialize charging threshold
wireless-hotkey:
- Check ACPI_COMPANION() against NULL
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCahBSaQAKCRBZrE9hU+XO
MXuOAQDhdhmEHMF6DLGsS1oYVgRmLe+JTH7sC+j4GX7EXzdKYQEAtBWYBsVl6FXF
2ICXDIIg1nUX4L8Ilr5pqnC4qYYLQAM=
=rdI2
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from
- Add ACPI_HANDLE()/ACPI_COMPANION() NULL checks (many drivers) to
handle match overrides gracefully
- asus-armoury:
- Fix mini-LED mode get/set
- Add support for FA401EA, FX607VU, G614FR, and GU605CP
- bitland-mifs-wmi:
- Add CONFIG_LEDS_CLASS dependency
- hp-wmi:
- Add thermal support for Omen 16-c0xxx (board 8902)
- intel/vsec:
- Fix enable_cnt imbalance due to PCIe error recovery
- surface/aggregator_registry:
- Remove battery & AC nodes on Surface Laptop 7 to avoid duplicated
devices
- uniwill-laptop:
- Handle uninitialized and invalid charging threshold values
- Accept charging threshold of 0 through power supply sysfs ABI and
clamp it to 1
- Make 'force' parameter to work also when device descriptor is
found
- Do not enable charging limit despite the 'force' parameter to
avoid permanent damage to battery
* tag 'platform-drivers-x86-v7.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (35 commits)
platform/x86: bitland-mifs-wmi: add CONFIG_LEDS_CLASS dependency
platform/x86: wireless-hotkey: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_haps: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_bluetooth: Check ACPI_COMPANION() against NULL
platform/x86: toshiba_acpi: Check ACPI_COMPANION() against NULL
platform/x86: system76: Check ACPI_COMPANION() against NULL
platform/x86: sony-laptop: Check ACPI_COMPANION() against NULL
platform/x86: panasonic-laptop: Check ACPI_COMPANION() against NULL
platform/x86: lg-laptop: Check ACPI_COMPANION() against NULL
platform/x86: intel/smartconnect: Check ACPI_HANDLE() against NULL
platform/x86: intel/rst: Check ACPI_COMPANION() against NULL
platform/x86: fujitsu-tablet: Check ACPI_COMPANION() against NULL
platform/x86: fujitsu: Check ACPI_COMPANION() against NULL
platform/x86: eeepc-laptop: Check ACPI_COMPANION() against NULL
platform/x86: dell/dell-rbtn: Check ACPI_COMPANION() against NULL
platform/x86: asus-laptop: Check ACPI_COMPANION() against NULL
platform/x86: acer-wireless: Check ACPI_COMPANION() against NULL
platform/x86: asus-armoury: add support for GU605CP
platform/x86: asus-armoury: add support for FA401EA
platform/x86: asus-armoury: add support for G614FR
...
The newly added driver requires the LED classdev support
and causes a link failure when that is disabled:
x86_64-linux-ld: vmlinux.o: in function `bitland_mifs_wmi_probe':
bitland-mifs-wmi.c:(.text+0xede02a): undefined reference to `devm_led_classdev_register_ext'
Fixes: dc1ec4fa86 ("platform/x86: bitland-mifs-wmi: Add new Bitland MIFS WMI driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260519202804.1339581-1-arnd@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_keys_acpi_driver in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the input device registered by the driver will appear
under the platform device used for driver binding.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/2002306.taCxCBeP46@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_ipml_acpi_driver in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the backlight and rfkill devices registered by the
driver will appear under the platform device used for driver binding.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/3753883.R56niFO833@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_tablet_acpi_driver in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the input device registered by the driver will appear
under the platform device used for driver binding.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/4504318.ejJDZkT8p0@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_accel_acpi_driver in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the input device registered by the driver will
appear under the platform device used for driver binding, but the sysfs
attribute added by the driver under the ACPI companion of that device
will stay there in case there are utilities in user space expecting
it to be present there.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/24365138.6Emhk5qWAg@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert cmpc_accel_acpi_driver_v4 in the Classmate
laptop driver from an ACPI driver to a platform one.
After this change, the input device registered by the driver will
appear under the platform device used for driver binding, but the sysfs
attributes added by the driver under the ACPI companion of that device
will stay there in case there are utilities in user space expecting
them to be present there.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/3609276.QJadu78ljV@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to using struct
platform_driver instead of struct acpi_driver, make it install its ACPI
notify handlers directly instead of using struct acpi_driver .notify()
callbacks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/1856277.VLH7GnMWUR@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since cmpc_add_acpi_notify_device() and cmpc_remove_acpi_notify_device()
have been modified to take a plain struct device pointer as the first
argument, then have nothing to do with ACPI in principle, so rename
them to cmpc_add_notify_device() and cmpc_remove_notify_device(),
respectively, and consolidate white space around the call sites of
the former.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/3338539.5fSG56mABF@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to using struct
platform_driver instead of struct acpi_driver, modify two helper
functions in it, cmpc_add_acpi_notify_device() and
cmpc_remove_acpi_notify_device(), to take a struct device pointer
argument instead of a struct acpi_device pointer argument and update
their callers accordingly.
While at it, change the return type of cmpc_remove_acpi_notify_device()
to void because its return value is never checked.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/9615385.CDJkKcVGEf@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent modifications, change code ordering in
cmpc_accel_add_v4(), cmpc_accel_add(), and cmpc_accel_remove_v4()
so that the ordering of the probe rollback code is the same as the
ordering of the corresponding removal code.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/2036641.PYKUYFuaPT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Switch over cmpc_accel_add_v4() and cmpc_accel_add() to using
devm_kzalloc() for allocating the accel object which will cause it
to be freed automatically on device removal, so it won't be leaked
any more.
This also simplifies the rollback paths in these functions somewhat.
Fixes: 529aa8cb0a ("classmate-laptop: add support for Classmate PC ACPI devices")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/10846403.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use devm_kzalloc() and devm_input_allocate_device() in
ebook_switch_probe() for allocating the button object and the
input device, respectively, to simplify the rollback path in
that function and ebook_switch_remove().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/6015220.DvuYhMxLoT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 wireless-hotkey driver.
Fixes: 8507277ef1 ("platform/x86: wireless-hotkey: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3899916.MHq7AAxBmi@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_haps driver.
Fixes: 3a96c7915d ("platform/x86: toshiba_haps: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2285136.Mh6RI2rZIc@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_bluetooth driver.
Fixes: 553b2ac59f ("platform/x86: toshiba_bluetooth: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2715450.Lt9SDvczpP@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 toshiba_acpi driver.
Fixes: 246d6cefe5 ("platform/x86: toshiba_acpi: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/1973170.CQOukoFCf9@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 system76 driver.
Fixes: 80b8f68b94 ("platform/x86: system76: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2072699.usQuhbGJ8B@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 sony-laptop driver.
Fixes: 138db7ee58 ("platform/x86: sony-laptop: Convert PIC driver to a platform one")
Fixes: 14004dd31c ("platform/x86: sony-laptop: Convert NC driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/1871155.VLH7GnMWUR@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 panasonic-laptop driver.
Fixes: de6837243a ("platform/x86: panasonic-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3353471.5fSG56mABF@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 lg-laptop driver.
Fixes: 2d9cb20610 ("platform/x86: lg-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3706551.iIbC2pHGDl@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel/smartconnect driver.
Fixes: 8a44bd3ffd ("platform/x86: intel/smartconnect: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/7956676.EvYhyI6sBW@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 intel/rst driver.
Fixes: 163a68a31f ("platform/x86: intel/rst: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2051525.PYKUYFuaPT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 fujitsu-tablet driver.
Fixes: bd13b265d3 ("platform/x86: fujitsu-tablet: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/10861611.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add requisite ACPI_COMPANION() checks against NULL to the
platform/x86 fujitsu-laptop driver.
Fixes: 6da22b031a ("platform/x86: fujitsu: Convert laptop driver to a platform one")
Fixes: d5c9212ccf ("platform/x86: fujitsu: Convert backlight driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://patch.msgid.link/3430329.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 eeepc-laptop driver.
Fixes: 079b59fd2d ("platform/x86: eeepc-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3056852.e9J7NaK4W3@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 dell-rbtn driver.
Fixes: 19ebacfb44 ("platform/x86: dell/dell-rbtn: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2276487.irdbgypaU6@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 asus-laptop driver.
Fixes: ba19eb1017 ("platform/x86: asus-laptop: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/5083741.GXAFRqVoOG@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 acer-wireless driver.
Fixes: f7e648027d ("platform/x86: acer-wireless: Convert ACPI driver to a platform one")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/4746824.LvFx2qVVIh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
While being less compact, using named initializers allows to more easily
see which members of the structs are assigned which value without having
to lookup the declaration of the struct. And it's also more robust
against changes to the struct definition.
This patch doesn't modify the compiled arrays, only their representation
in source form benefits. The former was confirmed with x86 and arm64
builds.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20260519150819.1591409-2-u.kleine-koenig@baylibre.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Add TDP data for laptop model GU605CP.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-5-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model FA401EA.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model G614FR.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model FX607VU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517220005.4594-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The mini-LED current_value attribute does not work on devices that use
ASUS_WMI_DEVID_MINI_LED_MODE2 (2024 and newer models).
Reading is broken: mini_led_mode_current_value_show() fetches the mode
from the device but then decodes a literal 0 instead of the value it
just read:
mode = FIELD_GET(ASUS_MINI_LED_MODE_MASK, 0);
So mode is always 0, and the attribute always reports the same thing
regardless of the real hardware state.
Writing is broken too. The number a user writes is an index; the value
the firmware actually wants is looked up from that index in
mini_led_mode_map[]. mini_led_mode_current_value_store() skips that
lookup and passes the raw index straight to armoury_attr_uint_store().
On 2024 devices the firmware numbers its modes differently from the
index, so some writes are rejected with -EINVAL and the rest send the
wrong mode to the hardware.
Fix both paths: decode the value actually read from the device when
reading, and look up the firmware value before sending it when
writing. Older (MODE1) devices were unaffected because there the index
and the firmware value are the same.
Fixes: f99eb09809 ("platform/x86: asus-armoury: move existing tunings to asus-armoury module")
Signed-off-by: Ahmed Yaseen <yaseen@ghoul.dev>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260517182957.11069-1-yaseen@ghoul.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After a PCIe Uncorrectable Error has been reported by a device with
Intel Vendor Specific Extended Capabilities and has been recovered
through a Secondary Bus Reset, its driver calls intel_vsec_pci_probe()
to rescan and reinitialize VSECs.
intel_vsec_pci_probe() invokes pcim_enable_device() and thereby adds
another devm action which calls pcim_disable_device() on driver unbind.
So once the driver unbinds, pcim_disable_device() will be called as many
times as an Uncorrectable Error occurred, plus one. This will lead to
an enable_cnt imbalance on driver unbind.
Additionally, since commit dc957ab6aa ("platform/x86/intel/vsec: Add
private data for per-device data"), a devm_kzalloc() allocation is
leaked on every Uncorrectable Error.
Avoid by splitting the VSEC rescan out of intel_vsec_pci_probe() into a
separate helper and calling that on PCIe error recovery.
Fixes: 936874b77d ("platform/x86/intel/vsec: Add PCI error recovery support to Intel PMT")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v6.0+
Link: https://patch.msgid.link/bd594d09fa866dc51dddc9a447c3b23f9b1402cc.1778736835.git.lukas@wunner.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It seems that on some older models (~2020) the battery charging limit
can permanently damage the battery. Prevent users from enabling this
feature thru the "force" module parameter to avoid causing permanent
hardware damage on such devices.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Link: https://www.reddit.com/r/XMG_gg/comments/ld9yyf/battery_limit_hidden_function_discovered_on/
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-5-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Users might want to force-enable all possible features even on
machines with a valid device descriptor. Until now the "force"
module param was ignored on such machines. Fix this to make
it easier to test for support of new features.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-4-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The power supply sysfs ABI states that:
Not all hardware is capable of setting this to an arbitrary
percentage. Drivers will round written values to the nearest
supported value. Reading back the value will show the actual
threshold set by the driver.
The driver currently violates this ABI by rejecting a charging
threshold of 0. Fix this by clamping this value to 1.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-3-W_Armin@gmx.de
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The EC might initialize the charge threshold with 0 to signal that
said threshold is uninitialized. Detect this and replace said value
with 100 to signal the EC that we want to take control of battery
charging. Also set the threshold to 100 if the EC-provided value
is invalid.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260512232145.329260-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
surfacepro3_button driver.
Fixes: d913a5a12b ("platform/surface: surfacepro3_button: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Chen Yu <yu.c.chen@intel.com>
Link: https://patch.msgid.link/23119222.EfDdHjke4D@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel-vbtn driver.
Fixes: 26173179fa ("platform/x86: intel-vbtn: Eval VBDL after registering our notifier")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/3426431.aeNJFYEL58@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel_sar driver.
Fixes: dcfbd31ef4 ("platform/x86: BIOS SAR driver for Intel M.2 Modem")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/14023870.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 intel-hid driver.
Fixes: ecc83e52b2 ("intel-hid: new hid event driver for hotkeys")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/1971512.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
platform/x86 hp_accel driver.
Fixes: 8ebcb6c94c ("platform/x86: hp_accel: Convert to be a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/2425918.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_HANDLE() check against NULL to the
platform/x86 adv_swbutton driver.
Fixes: 3d904005f6 ("platform/x86: add support for Advantech software defined button")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/5115425.31r3eYUQgx@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-c0xxx (board ID: 8902) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to the omen_v1_legacy_thermal_params quirk.
Testing on board 8902 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Signed-off-by: Konenko Andrey Viktorovich <admin@aquinas.su>
Link: https://patch.msgid.link/T3DTKbKwQzOgk_0eUG-kMg@aquinas.su
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Surface Laptop 7 exposes battery and AC status via Qualcomm PMIC GLINK
qcom_battmgr. Registering the standard SSAM battery and AC client
devices on this platform causes duplicate power-supply devices to
appear.
Drop the SSAM battery and AC nodes from the Surface Laptop 7 registry
group so that only the qcom_battmgr power supplies are instantiated.
Fixes: b27622f131 ("platform/surface: Add OF support")
Signed-off-by: Oliver White <oliverjwhite07@gmail.com>
Link: https://patch.msgid.link/20260409034347.17381-1-oliverjwhite07@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Intel NVL platform uses IPU8 powered by a TPS68470 PMIC,
requiring board data to configure the GPIOs and regulators for
proper camera sensor operation.
Signed-off-by: Arun T <arun.t@intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Rename the MSI-specific daisy-chain GPIO properties and software node
to generic names so they can be reused by other platforms that also
require daisy-chain GPIO configuration for TPS68470.
Signed-off-by: Arun T <arun.t@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Add changes to support new ranking table version. Version 2 of the
heterogeneous ranking table provides static CPU rankings. Version 3 adds
dynamic ranking table support on newer AMD platforms. These changes ensure
that platforms still reporting version 2 continue to function with the
existing static ranking path, avoiding regressions on older hardware
that does not supply a dynamic ranking table.
Signed-off-by: Krishnamoorthi M <krishnamoorthi.m@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://patch.msgid.link/20260507190926.1211726-1-krishnamoorthi.m@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Transition to the new wmi_buffer based WMI API.
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260429-aw-new-api-v5-1-7702668d04c6@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes and New HW Support:
- asus-nb-wmi: Use existing keyboard quirk for ASUS Zenbook Duo UX8407AA
- hp-wmi: Add support for Victus 16-r0xxx (8BC2)
- intel/vsec_tpmi:
- Move debugfs register before creating devices
- Prevent fault during unbind
- lenovo-wmi-*:
- Fix memory leak in lwmi_dev_evaluate_int()
- Balance IDA id allocation and free
- Balance component bind and unbind
- Prevent sending uninitialized WMI arguments to the device
- Decouple lenovo-wmi-gamezone and lenovo-wmi-other to simplify module
dependency graph
- Limit adding attributes to supported devices
- samsung-galaxybook: Handle kbd backlight, mic mure and camera block
hotkeys
The following is an automated shortlog grouped by driver:
asus-nb-wmi:
- add DMI quirk for ASUS Zenbook Duo UX8407AA
hp-wmi:
- Add support for Victus 16-r0xxx (8BC2)
intel:
- Add notifiers support
- Move debugfs register before creating devices
intel/tpmi/plr:
- Prevent fault during unbind
lenovo:
- Decouple lenovo-wmi-gamezone and lenovo-wmi-other
lenovo-wmi-helpers:
- Fix memory leak in lwmi_dev_evaluate_int()
- Move gamezone enums to wmi-helpers
lenovo-wmi-other:
- Add Attribute ID helper functions
- Balance component bind and unbind
- Balance IDA id allocation and free
- Fix tunable_attr_01 struct members
- Limit adding attributes to supported devices
- Zero initialize WMI arguments
samsung-galaxybook:
- Handle ACPI hotkey notifications
- Refactor camera lens cover input device
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCagcH8QAKCRBZrE9hU+XO
Mc3EAQCmrzg+JyqGiMCY+3rAFiZ25B4QDDpNHH0FoWFTQWi/bAD+LvweVeAnPze8
qWXx1QU4QJnq9JnbTcCSuuL7IEArNgs=
=hOGN
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- asus-nb-wmi:
- Use existing keyboard quirk for ASUS Zenbook Duo UX8407AA
- hp-wmi:
- Add support for Victus 16-r0xxx (8BC2)
- intel/vsec_tpmi:
- Move debugfs register before creating devices
- Prevent fault during unbind
- lenovo-wmi-*:
- Fix memory leak in lwmi_dev_evaluate_int()
- Balance IDA id allocation and free
- Balance component bind and unbind
- Prevent sending uninitialized WMI arguments to the device
- Decouple lenovo-wmi-gamezone and lenovo-wmi-other to simplify
module dependency graph
- Limit adding attributes to supported devices
- samsung-galaxybook:
- Handle kbd backlight, mic mute and camera block hotkeys
* tag 'platform-drivers-x86-v7.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: asus-nb-wmi: add DMI quirk for ASUS Zenbook Duo UX8407AA
platform/x86: lenovo-wmi-other: Limit adding attributes to supported devices
platform/x86: lenovo-wmi-other: Add Attribute ID helper functions
platform/x86: lenovo-wmi-helpers: Move gamezone enums to wmi-helpers
platform/x86: lenovo: Decouple lenovo-wmi-gamezone and lenovo-wmi-other
platform/x86: lenovo-wmi-other: Fix tunable_attr_01 struct members
platform/x86: lenovo-wmi-other: Zero initialize WMI arguments
platform/x86: lenovo-wmi-other: Balance component bind and unbind
platform/x86: lenovo-wmi-other: Balance IDA id allocation and free
platform/x86: lenovo-wmi-helpers: Fix memory leak in lwmi_dev_evaluate_int()
platform/x86: hp-wmi: Add support for Victus 16-r0xxx (8BC2)
platform/x86/intel/tpmi/plr: Prevent fault during unbind
platform/x86: intel: Add notifiers support
platform/x86: intel: Move debugfs register before creating devices
platform/x86: samsung-galaxybook: Handle ACPI hotkey notifications
platform/x86: samsung-galaxybook: Refactor camera lens cover input device
The MSI prestige AI EVO 13 and 16 have the same camera configuration
as model 14. Use the same platform data for all.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
[Sakari Ailus: Use user-reported board name for model 16.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Ensure MSI system is correct by checking board name too.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
wilco_ec event driver.
Fixes: 27d58498f6 ("platform/chrome: wilco_ec: event: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/2076666.usQuhbGJ8B@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
chromeos_tbmc driver.
Fixes: a2676ead25 ("platform/chrome: chromeos_tbmc: Convert to a platform driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1875121.VLH7GnMWUR@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Every platform driver can be forced to match a device that doesn't match
its list of device IDs because of device_match_driver_override(), so
platform drivers that rely on the existence of a device's ACPI companion
object need to verify its presence.
Accordingly, add a requisite ACPI_COMPANION() check against NULL to the
chromeos_privacy_screen driver.
Fixes: d3c2872ae3 ("platform/chrome: Convert ChromeOS privacy-screen driver to platform")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/3357444.5fSG56mABF@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The Lenovo diagnostics and support team have requested a mechanism
to get the raw data from the HWDD commands to support customer debug
situations.
Add a debugfs entry to display the HWDD raw data.
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260429015210.1863316-1-mpearson-lenovo@squebb.ca
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use a flexible array member to combine allocations. Avoids having to
free separately.
Add __counted_by for extra runtime analysis.
Move counting variable assignment to after allocations as is already
done by kzalloc_flex for GCC 15 and above.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260430224307.109311-1-rosenp@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Change to a flexible array member to allocate once instead of twice.
Use __counted_by for extra runtime analysis. Move the counting
variable assignment to right after allocation as done by
kzalloc_flex for GCC 15 and above.
Remove + 1 to allocation. It's already done in the previous line.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260430221555.83351-1-rosenp@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When the platform driver is loaded or unloaded, it overwrites the
existing LED states. This can cause a loss of early boot state when the
driver loads, and it can cause the ALARM contact to change state or
flicker.
Explicitly retain the existing LED state to prevent overwriting on
driver load and unload.
Tested-By: Robert Joslyn <robert.joslyn@redrectangle.org>
Reviewed-by: Robert Joslyn <robert.joslyn@redrectangle.org>
Signed-off-by: Brodie Abrew <brodie_abrew@selinc.com>
Link: https://patch.msgid.link/20260507004916.6710-1-brodie_abrew@selinc.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the OLPC XO-1.5 ebook switch driver from an
ACPI driver to a platform one.
After this change, the input device registered by the driver will appear
under the platform device used for driver binding.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8688586.T7Z3S40VBb@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3420768.aeNJFYEL58@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix formatting of two labels in ebook_switch_add() to make that
function follow the current kernel coding style more closely.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/14016199.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The device_set_wakeup_enable() call in ebook_switch_add() doesn't
actually do anything because power.can_wakeup is not set for ACPI
device objects. Moreover, had it done anything, it would have
registered a wakeup source object that wouldn't have been used
going forward and that wakeup source would have been leaked after
driver removal because ebook_switch_remove() doesn't clean it up.
Accordingly, remove that call from ebook_switch_add().
Also prevent leaking an enabled ACPI GPE after removing the driver by
adding appropriate cleanup code to ebook_switch_remove().
Fixes: 89ca11771a ("OLPC XO-1.5 ebook switch driver")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1966125.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
While being more verbose using a named initializer yields easier to
understand code and doesn't rely on the two hidden zeros in the
PCI_VDEVICE macro.
This doesn't introduce any changes to the compiled result of the array,
which was confirmed with an ARCH=x86 build.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Link: https://patch.msgid.link/20260507155025.3186956-2-u.kleine-koenig@baylibre.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use the existing zenbook duo keyboard quirk for the UX8407AA model too.
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260508070956.62201-1-p.pisati@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add Embedded controller driver support for Hamoa/Purwa/Glymur qualcomm
reference boards. It handles fan control, temperature sensors, access
to EC state changes and supports reporting suspend entry/exit to the
EC.
Co-developed-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Tested-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Co-developed-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Signed-off-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-add-driver-for-ec-v9-2-e5437c39b7f8@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds lwmi_is_attr_01_supported, and only creates the attribute subfolder
if the attribute is supported by the hardware. Due to some poorly
implemented BIOS this is a multi-step sequence of events. This is
because:
- Some BIOS support getting the capability data from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS support get/set for the current value from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS report capability data for a method that is not fully
implemented.
- Some BIOS have methods fully implemented, but no complimentary
capability data.
To ensure we only expose fully implemented methods with corresponding
capability data, we check each outcome before reporting that an
attribute can be supported.
Checking for lwmi_is_attr_01_supported during remove is not done to
ensure that we don't attempt to call cd01 or send WMI events if one of
the interfaces being removed was the cause of the driver unloading.
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Kurt Borja <kuurtb@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/DG60P3SHXR8H.3NSEHMZ6J7XRC@gmail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-10-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds lwmi_attr_id() function. In the same vein as LWMI_ATTR_ID_FAN_RPM(),
but as a generic, to de-duplicate attribute_id assignment boilerplate.
Adds tunable_attr_01_id() function that breaks out the members of a
tunable_attr_01 struct and passes them to lwmi_attr_id().
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-9-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In a later patch in the series the thermal mode enum will be accessed
across three separate drivers (wmi-capdata, wmi-gamezonem and wmi-other).
An additional patch in the series will also add a function prototype that
needs to reference this enum in wmi-helpers.h. To avoid having all these
drivers begin to import each others headers, and to avoid declaring an
opaque enum to hande the second case, move the thermal mode enum to
helpers where it can be safely accessed by everything that needs it from
a single import.
While at it, since the gamezone_events_type enum is the only remaining
item in the header, move that as well and remove the gamezone header
entirely.
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, lenovo-wmi-gamezone depends on lenovo-wmi-other as the former
imports symbols from the latter. The imported symbols are just used to
register a notifier block. However, there is no runtime dependency
between both drivers, and either of them can run without the other,
which is the major purpose of using the notifier framework.
Such a link-time dependency is non-optimal. A previous attempt to "fix"
it made LENOVO_WMI_GAMEZONE select LENOVO_WMI_TUNING, which was
fundamentally broken and resulted in undefined Kconfig behavior, as
`select' cannot be used on a symbol with potentially unmet dependencies.
Decouple both drivers by moving the thermal mode notifier chain to
lenovo-wmi-helpers. Methods for notifier block (un)registration are
exported for lenovo-wmi-gamezone, while a method for querying the
current thermal mode are exported for lenovo-wmi-other.
This turns the dependency graph from
+------------ lenovo-wmi-gamezone
| |
v |
lenovo-wmi-helpers |
^ |
| V
+------------ lenovo-wmi-other
into
+------------ lenovo-wmi-gamezone
|
v
lenovo-wmi-helpers
^
|
+------------ lenovo-wmi-other
To make it clear, the name of the notifier chain is also renamed from
`om_chain_head' to `tm_chain_head', indicating that it's used to query
the current thermal mode.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 6e38b9fcbf ("platform/x86: lenovo: gamezone needs "other mode"")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603252259.gHvJDyh3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202603260302.X0NjQOda-lkp@intel.com/
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In struct tunable_attr_01 the capdata pointer is unused and the size of
the id members is u32 when it should be u8. Fix these prior to adding
additional members.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds explicit initialization of wmi_method_args_32 declarations with
zero values to prevent uninitialized data from being sent to the device
BIOS when passed.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 22024ac536 ("platform/x86: Add Lenovo Gamezone WMI Driver")
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Rong Zhang <i@rong.moe>
Closes: https://lore.kernel.org/platform-driver-x86/95c7e7b539dd0af41189c754fcd35cec5b6fe182.camel@rong.moe/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When lwmi_om_master_bind() fails, the master device's components are
left bound, with the aggregate device destroyed due to the failure
(found by sashiko.dev [1]).
Balance calls to component_bind_all() and component_unbind_all() when an
error is propagated to the component framework.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-4-derekjohn.clark@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, the IDA id is only freed on wmi-other device removal or
failure to create firmware-attributes device, kset, or attributes. It
leaks IDA ids if the wmi-other device is bound multiple times, as the
unbind callback never frees the previously allocated IDA id.
Additionally, if the wmi-other device has failed to create a
firmware-attributes device before it gets removed, the wmi-device
removal callback double frees the same IDA id.
These bugs were found by sashiko.dev [1].
Fix them by moving ida_free() into lwmi_om_fw_attr_remove() so it is
balanced with ida_alloc() in lwmi_om_fw_attr_add(). With them fixed,
properly set and utilize the validity of priv->ida_id to balance
firmware-attributes registration and removal, without relying on
propagating the registration error to the component framework, which is
more reliable and aligns with the hwmon device registration and removal
sequences.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: e521d16e76 ("platform/x86: Add lenovo-wmi-helpers")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-2-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ifdeffery is unnecessary, as the compiler can already optimize away
all of the mfd-specific code based on the IS_ENABLED() in
keyboard_led_is_mfd_device().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20260404-cros_kbd_led-cleanup-v1-3-0dc1100d54e3@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Make the code simpler to read by passing the 'struct keyboard_led' as
a parameter to the 'init' callbacks instead of relying on the platform
device driver data.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20260404-cros_kbd_led-cleanup-v1-2-0dc1100d54e3@weissschuh.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
A race condition exists between the probe of cros-ec-sysfs and
cros-ec-sensorhub.
The `kb_wake_angle` attribute should only be visible if the sensor hub
detects two or more accelerometers. If cros_ec_sysfs_probe() runs
before cros_ec_sensorhub_register() completes sensor enumeration, the
sysfs attributes are created while `has_kb_wake_angle` is still false,
hiding `kb_wake_angle` incorrectly.
Store the created attribute group pointer in `ec_dev->group`. When
the sensor hub completes sensor enumeration, it checks for this group
and calls sysfs_update_group() to notify the sysfs core to re-evaluate
attribute visibility. This ensures the `kb_wake_angle` attribute
visibility is correctly updated regardless of the driver probe order.
Co-developed-by: Gwendal Grignou <gwendal@chromium.org>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Link: https://lore.kernel.org/r/20260407102615.1605317-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Add Nova Lake support in intel_pmc_core driver
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20260505043342.2573556-8-xi.pardee@linux.intel.com
[ij: added missing statics to a few structs]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update the Intel PMC Core driver to fetch PMC information only for
available PMCs. Previously, the driver attempted to retrieve PMC info
even when the corresponding PMC was not present.
This change aligns with recent updates to the Intel SSRAM Telemetry
driver. Starting with NVL, the SSRAM Telemetry driver is probed for
each individual SSRAM device. The prior implementation could not
differentiate between an unavailable PMC and one that had not yet
completed information retrieval. To resolve this, the PMC Core driver
now skips obtaining PMC info for unavailable PMCs.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20260505043342.2573556-7-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for handling different DMU Die C6 offsets across platforms.
The previous implementation assumed a uniform DMU Die C6 offset for all
platforms, which is no longer valid after an upcoming change.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20260505043342.2573556-6-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update the PMC SSRAM discovery process to identify the device using its
PCI Device ID rather than relying on a fixed PCI bus location. The
enumeration of integrated devices on the PCI bus is no longer guaranteed
to be consistent across CPUs.
On earlier platforms, the IOE and PCH SSRAM devices were hidden from the
BIOS, and the SOC SSRAM device is associated to telemetry regions from all
available SSRAM devices. Starting with Nova Lake, the IOE and PCH SSRAM
devices register their telemetry regions independently, meaning each
telemetry region is now linked to its corresponding SSRAM device. A new
ssram_hidden attribute has been added to the pmc_dev_info structure to
reflect this distinction.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20260505043342.2573556-5-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enable the Package C-state blocking counter in the PMT telemetry
region. This counter reports the number of 10 µs intervals during
which a Package C-state 10.2/3 entry was blocked for the specified
reasons.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20260505043342.2573556-4-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Enable the Package C-state LTR blocking counter in the PMT telemetry
region. This counter records how many times any Package C-state entry
is blocked for the specified reasons.
Add pmc_core_pkgc_counters_show() as a common helper to display
package C-state blocking counters from the telemetry region.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20260505043342.2573556-3-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Use scope-based cleanup in pmc_core_punit_pmt_init() instead of manually
freeing. This simplifies the code flow by removing the explicit put call,
making it less error-prone.
Signed-off-by: Xi Pardee <xi.pardee@linux.intel.com>
Link: https://patch.msgid.link/20260505043342.2573556-2-xi.pardee@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In order to allow GPIOLIB to match cherryview and baytrail GPIO
controllers by their firmware nodes instead of their names, we need to
attach the - currently "dangling" - existing software nodes to their
target devices dynamically.
The driver uses platform_create_bundle() and expects all required
providers to be present before it itself is probed. We know the name of
the device we're waiting for so look them up and assign the appropriate
software node as the secondary firmware node of the underlying ACPI node.
Scheduling fine-grained devres actions allows for proper teardown and
unsetting of the secondary firmware nodes.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260504-baytrail-real-swnode-v5-2-c7878b69e383@oss.qualcomm.com
[ij: added linux/bug.h include]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
struct platform_device_info now has the 'swnode' field allowing passing
software nodes directly to platform_device_register_full() without going
through software_node_fwnode(). It supports both registered and
unregistered software nodes. Use it to drop one layer of indirection.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260429-pcengines-apuv2-swnodes-v1-1-cd1a6fad856d@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The software node representing the GPIO controller to consumers is
"dangling": it's not really attached to the device. The GPIO lookup
relies on matching the name of the node to the chip's label. Switch to
using platform_device_register_full() and use the swnode field of struct
platform_device_info to attach the software node to the GPIO device.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427102459.110332-1-bartosz.golaszewski@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently if a user enqueues a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
This patch continues the effort to refactor worqueue APIs, which has begun
with the change introducing new workqueues and a new alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
Replace system_wq with system_percpu_wq, keeping the same behavior.
The old wq (system_wq) will be kept for a few release cycles.
Cc: Marek Behun <kabel@kernel.org>
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Marek Behún <kabel@kernel.org>
Fixes
- hp-wmi: silence unknown board warning for 8D41
- lenovo/wmi-other: Fix uninitialized variable in fan RPM handling
- wmi: Check min_size also when ACPI does not return an out object
The following is an automated shortlog grouped by driver:
hp-wmi:
- silence unknown board warning for 8D41
lenovo: wmi-other:
- Fix uninitialized variable in lwmi_om_hwmon_write()
wmi:
- Fix unchecked min_size in wmidev_invoke_method()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCafx4pgAKCRBZrE9hU+XO
MerAAP9ALfDumabgsXGDibvB5700w4oXxKpf+NS/O0RGlKSpigD/bvo4xIut5Qow
xYZfEhYkRUyd0bSQwYh5i7fS8am7Nw8=
=Lais
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
- Silence unknown board warning for 8D41 (hp-wmi)
- Fix uninitialized variable in fan RPM handling (lenovo/wmi-other)
- Check min_size also when ACPI does not return an out object (wmi)
* tag 'platform-drivers-x86-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lenovo: wmi-other: Fix uninitialized variable in lwmi_om_hwmon_write()
platform/x86: hp-wmi: silence unknown board warning for 8D41
platform/wmi: Fix unchecked min_size in wmidev_invoke_method()
The HP Victus 16-r0xxx (board ID: 8BC2) has the same WMI as other Victus
S boards, but requires quirks for correctly switching thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8BC2 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Signed-off-by: Haichen Feng <2806891994@qq.com>
Link: https://patch.msgid.link/tencent_8E29805D8DC7B6005244C3433C62DD9DF606@qq.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This driver faults when intel vsec driver is unbound from PCI driver
interface. For example:
echo 0000:00:03.1 > /sys/bus/pci/drivers/intel_vsec/unbind
This is caused by accessing plr->dbgfs_dir after vsec_tpmi driver is
removed. Here vsec_tpmi driver is the parent. On unbind, the parent
device remove callback is called first which here will remove debugfs
interface. Hence plr->dbgfs_dir is no longer valid.
Register notifier for TPMI_CORE_EXIT and make this pointer to NULL,
so that debugfs_remove_recursive() is not called with bad plr->dbgfs_dir
pointer.
After notifier is returned the vsec_tpmi driver will call remove debugfs
by calling debugfs_remove_recursive().
Fixes: 811f67c516 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-4-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In some cases a driver using services of vsec_tpmi driver requires some
processing before vsec_tpmi exits. For example a children using debugfs
can't use debugfs as this will be deleted by the vsec_tpmi driver.
This is the case when unbind using PCI driver interface. In this case
the remove callback of vsec_tpmi driver is called first, then remove
callback of its children.
Add support of blocking chain notifiers support. Notify on successful probe
and before clean up in the remove callback.
Fixes: 811f67c516 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-3-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It is possible that the driver handling device is enumerated before
registering debugfs. If the driver wants to access debugfs by calling
tpmi_get_debugfs_dir(), this will return error in this case.
Hence register debugfs before creating devices.
Fixes: 811f67c516 ("platform/x86/intel/tpmi: Add new auxiliary driver for performance limits")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: Stable@vger.kernel.org
Link: https://patch.msgid.link/20260430151103.1549733-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On Samsung Galaxy Book 5 (SAM0430), the keyboard backlight, microphone
mute, and camera block hotkeys do not generate i8042 scancodes.
Instead they arrive as ACPI notifications 0x7d, 0x6e, and 0x6f
respectively, all of which previously fell through to the default
"unknown" warning in galaxybook_acpi_notify().
Add handling for these three events:
- 0x7d (Fn+F9, keyboard backlight): schedule the existing
kbd_backlight_hotkey_work which cycles brightness.
- 0x6e (Fn+F10, microphone mute): emit KEY_MICMUTE via the driver's
input device.
- 0x6f (Fn+F11, camera block): if block_recording is active use the
existing block_recording_hotkey_work; otherwise emit a toggle of
SW_CAMERA_LENS_COVER via the driver's input device on models where
the block_recording ACPI feature is not supported.
Tested on Samsung Galaxy Book 5 (SAM0430) and Samsung Galaxy Book2 Pro
(SAM0429).
Signed-off-by: Ayaan Mirza Baig <ayaanmirzabaig85@gmail.com>
Co-developed-by: Joshua Grisham <josh@joshuagrisham.com>
Signed-off-by: Joshua Grisham <josh@joshuagrisham.com>
Link: https://patch.msgid.link/20260418004613.93981-3-ayaanmirzabaig85@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename the camera_lens_cover_switch input device to a generic input
device which can be used for multiple input events. Move input device
allocation and registration into a dedicated galaxybook_input_init()
helper which is called early in probe so that the device is available
to all features.
No functional change.
Signed-off-by: Ayaan Mirza Baig <ayaanmirzabaig85@gmail.com>
Link: https://patch.msgid.link/20260418004613.93981-2-ayaanmirzabaig85@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
* Fixes
- Fix a NULL dereference in cros_ec_typec.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCafql3BMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0WUYBANT74RbimiLqthwB3eAKwDI/NoY1n4L1
DFLw9p9aAZ44AQDobVTg3UirNAo7tzcXDXaAhNSMn02A8cOQfrSShLadAQ==
=WDBR
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome-platform fix from Tzung-Bi Shih:
- Fix a NULL dereference in cros_ec_typec
* tag 'chrome-platform-fixes-v7.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_typec: Init mutex in Thunderbolt registration
Insufficient data is exported to allow direct access to TPMI registers
through MMIO. On non-partitioned systems domain_id can be used both for
mapping CPUs to their compute die IDs and for mapping die indices to
their MMIO memory blocks presented to userspace via TPMI debugfs.
However on partitioned systems the debugfs association doesn't work
anymore. This is due to how TPMI partitioning influences domain_id
calculation. The previous association is lost on partitioned systems in
order to keep using domain_id for mapping CPUs to compute dies.
Expose the instance ID in sysfs that's unique in the scope of one TPMI
partition (and hence one TPMI device). It's a physical index into mapped
MMIO blocks and can be used by userspace to figure out how to directly
access TPMI registers.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/b9ae8d5f1ab86bcdb1a8636fa48865a9e49e2e21.1775665057.git.m.wieczorretman@pm.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The "instance" word has a specific meaning in TPMI. It is a physical
index related to compute dies and IO dies present on a single TPMI
partition (which is also a single TPMI device). It's used for mapping
MMIO blocks for direct TPMI register access.
The currently used "instance_id" uncore_data struct field is a
sequentially generated value that's used for appending to uncore
directories inside the /sys/devices/system/cpu/intel_uncore_frequency
directory. It has no relation to the physical TPMI elements.
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/4d983157199cf0e163597df254e2dc629878b818.1775665057.git.m.wieczorretman@pm.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
cros_typec_register_thunderbolt() missed initializing the `adata->lock`
mutex. This leads to a NULL dereference when the mutex is later
acquired (e.g. in cros_typec_altmode_work()).
Initialize the mutex in cros_typec_register_thunderbolt() to fix the
issue.
Cc: stable@vger.kernel.org
Fixes: 3b00be26b1 ("platform/chrome: cros_ec_typec: Thunderbolt support")
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Link: https://lore.kernel.org/r/20260505053403.3335740-1-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
When the flag relax_fan_constraint is set, local variable 'raw'
is never assigned, and lwmi_om_hwmon_write() will pass uninitialized
value to lwmi_om_fan_get_set() resulting in undefined behavior.
This flag allows user to bypass minimum fan RPM divisor rounding,
but assignment to 'raw' only happens in the non-relaxed path.
Fix by defaulting 'raw' to user provided 'val' in the else branch.
Fixes: 51ed34282f ("platform/x86: lenovo-wmi-other: Add HWMON for fan reporting/tuning")
Reviewed-by: Rong Zhang <i@rong.moe>
Signed-off-by: Yufei CHENG <cd345al@gmail.com>
Link: https://patch.msgid.link/20260426165034.9073-1-cd345al@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen Max 16-ah0xxx, DMI board ID 8D41 is currently marked with
victus_s_thermal_params in the victus_s_thermal_profile_boards[] list.
This disables thermal profile readback and adds a dmesg warning during
driver init for "unknown board".
After testing we know that (similar to another HP Omen Max 16 device,
board ID 8D87), the embedded controller on this board does not expose
thermal profile which means we have to intentionally disable EC
readback.
Changing its driver_data to omen_v1_no_ec_thermal_params is sufficient
to silence the warning.
Tested-by: Benjamin Y <hectare.plains1h@icloud.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260429180953.129885-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
After calling wmidev_evaluate_method(), if the ACPI core does not return
an out object, then wmidev_invoke_method() bypasses the min_size check
and returns 0. Add a check for min_size if there is not an out object.
Fixes: 1aeded2f55 ("platform/wmi: Extend wmidev_query_block() to reject undersized data")
Closes: https://sashiko.dev/#/patchset/20260406203237.2970-1-W_Armin%40gmx.de
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260429-invoke-fix-v1-1-ce938eb80cd3@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Remove an unneeded goto statement in hotkey_kthread(). Since
the function has a single exit location with no cleanup code,
the jump provides no benefit. Per the kernel coding style,
returning directly is preferred over goto in such case [1].
[1] https://www.kernel.org/doc/html/latest/process/coding-style.html
Signed-off-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Tested-by: Eduardo Vasconcelos <eduardo@eduardovasconcelos.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260425063936.9360-1-eduardo@eduardovasconcelos.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The lpc_ich MFD driver now exposes the software node associated with the
its GPIO controller cell. Remove the dummy software node from the
meraki-mx100 driver and reference the real one instead.
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260427-meraki-swnodes-v5-1-ad91cd306472@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
strcpy() has been deprecated [1] because it performs no bounds checking
on the destination buffer, which can lead to buffer overflows. While the
current code works correctly, replace strcpy() with the safer strscpy()
to follow secure coding best practices.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strcpy [1]
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260410091633.2822-6-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The buffer parameters in populate_{security,string}_buffer() and
call_{biosattributes,password}_interface() are raw byte buffers, not
character strings - use 'u8 *' instead of 'char *' to reflect this.
Update the local buffer variables at the call sites and in
populate_security_buffer() accordingly.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260410091633.2822-4-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Highlights:
- asus-wmi:
- Retain battery charge threshold during boot which avoids unsolicited
change to 100%. Return -ENODATA when the limit is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
- barco-p50-gpio: Normalize gpio_get return values
- bitland-mifs-wmi: Add driver for Bitland laptops (supports platform
profile,hwmon, kbd backlight, gpu mode, hotkeys, and
fan boost)
- dell_rbu: Fix using uninitialized value in sysfs write function
- dell-wmi-sysman: Respect destination length when constructing enum
strings
- hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and Omen MAX
16-ak0xxxx
- input: trackpoint & thinkpad_acpi: Enable doubletap by default and
add sysfs enable/disable
- int3472: Add support for GPIO type 0x02 (IR flood LED)
- intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
- intel/vsec: Refactor to support ACPI-enumerated PMT endpoints.
- pcengines-apuv2: Attach software node to the gpiochip
- uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
- wmi: Perform output size check within WMI core to allow simpler WMI
drivers
- acpi_driver -> platform driver conversions (a large number of changes
from Rafael J. Wysocki)
- Miscellaneous cleanups / refactoring / improvements
The following is an automated shortlog grouped by driver:
acer-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wireless:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
asus-wmi:
- adjust screenpad power/brightness handling
- do not enforce a battery charge threshold
- fix screenpad brightness range
barco-p50-gpio:
- convert to guard() notation
- normalize return value of gpio_get
bitland-mifs-wmi:
- Add new Bitland MIFS WMI driver
dell/dell-rbtn:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
dell_rbu:
- avoid uninit value usage in packet_size_write()
dell-wmi-sysman:
- bound enumeration string aggregation
- Clean up security buffer helpers
- Fix typo in function comment
- Use standard kobj_sysfs_ops
- Use sysfs_emit{_at} in show functions
Documentation: laptops:
- Update documentation for uniwill laptops
Documentation:
- thinkpad-acpi - Document doubletap_enable attribute
eeepc-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
fujitsu:
- Convert backlight driver to a platform one
- Convert laptop driver to a platform one
- Register ACPI notify handlers directly
- Reorder code to avoid forward declarations
fujitsu-tablet:
- Convert ACPI driver to a platform one
hp-wmi:
- add locking for concurrent hwmon access
- add Omen 14-fb0xxx (board 8C58) support
- Add support for Omen 16-n0xxx (8A44)
- Add support for Omen 16-wf1xxx (8C77)
- Add support for OMEN MAX 16-ak0xxx (8D87)
- avoid cancel_delayed_work_sync from work handler
- fix fan table parsing
- fix ignored return values in fan settings
- fix u8 underflow in gpu_delta calculation
- Ignore backlight and FnLock events
- use mod_delayed_work to reset keep-alive timer
input:
- trackpoint - Enable doubletap by default on capable devices
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
- Parameterize LED con_id in registration
- Rename pled to led in LED registration code
- Use local variable for LED struct access
intel/rst:
- Convert ACPI driver to a platform one
intel/smartconnect:
- Convert ACPI driver to a platform one
intel/tpmi:
- Use 32 bit aligned address for debugfs mem write
intel/vsec:
- Decouple add/link helpers from PCI
- Make driver_data info const
- Plumb ACPI PMT discovery tables through vsec
- Refactor base_addr handling
- Return real error codes from registration path
- Switch exported helpers from pci_dev to device
lg-laptop:
- Convert ACPI driver to a platform one
- Drop debug-only ACPI notify handler
nvsw-sn2201:
- Drop unused include
panasonic-laptop:
- Convert ACPI driver to a platform one
- Fix OPTD notifier registration and cleanup
- Make pcc_register_optd_notifier() void
- Register ACPI notify handler directly
- Remove redundant checks from 3 functions
pcengines-apuv2:
- attach software node to the gpiochip
sony-laptop:
- Convert NC driver to a platform one
- Convert PIC driver to a platform one
- Register ACPI notify handler directly
surface: hotplug:
- Correct inclusion for GPIO APIs
surface: surfacepro3_button:
- Convert to a platform driver
- Drop wakeup source on remove
- Register ACPI notify handler
system76:
- Convert ACPI driver to a platform one
- Drop redundant devm_led_classdev_unregister()
- Register ACPI notify handler directly
thinkpad_acpi:
- Add sysfs control for TrackPoint double-tap
- Drop ACPI driver registration
- remove obsolete TODO comment
- use seq_puts() instead of seq_printf()
tools/power/x86/intel-speed-select:
- Avoid current base freq as maximum
- Fix cpu extended family ID decoding
- Fix output when running on unsupported CLX platforms
- Fix some program return value
- Print Version info when Incompatible API version is detected
- v1.26 release
topstar-laptop:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_acpi:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
- Reorder code to avoid forward declaration
toshiba_bluetooth:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
toshiba_haps:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
uniwill-laptop:
- Apply features across all TUXEDO devices
- Fix signedness bug
- Fix XMG Fusion 15 (L19) entries
- Implement USB-C power priority setting
- Rework hwmon feature defines
wireless-hotkey:
- Convert ACPI driver to a platform one
- Register ACPI notify handler directly
wmi:
- Add wmidev_invoke_procedure()
- Convert drivers to use wmidev_invoke_procedure()
- Extend wmidev_invoke_method() to reject undersized data
- Extend wmidev_query_block() to reject undersized data
- Prepare to reject undersized unmarshalling results
- Replace .no_notify_data with .min_event_size
x86:
- remove unnecessary module_init/exit() functions
Merges:
- Merge branch 'intel-sst' of https://github.com/spandruvada/linux-kernel into review-ilpo-next
- Merge tag 'fixes' into 'for-next'
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaeYxSwAKCRBZrE9hU+XO
MRzTAQCPUKVOpSY/cjtPXVBn0uJbAo1MSvytv00Kv7dcatvrrwEA9lqmwOfl0kzr
CowEVVCD3om++W9vOsL65hachbAl1QA=
=1qkw
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
"asus-wmi:
- Retain battery charge threshold during boot which avoids
unsolicited change to 100%. Return -ENODATA when the limit
is not yet known
- Improve screenpad power/brightness handling consistency
- Fix screenpad brightness range
barco-p50-gpio:
- Normalize gpio_get return values
bitland-mifs-wmi:
- Add driver for Bitland laptops (supports platform profile,
hwmon, kbd backlight, gpu mode, hotkeys, and fan boost)
dell_rbu:
- Fix using uninitialized value in sysfs write function
dell-wmi-sysman:
- Respect destination length when constructing enum strings
hp-wmi:
- Propagate fan setting apply failures and log an error
- Fix sysfs write vs work handler cancel_delayed_work_sync() deadlock
- Correct keepalive schedule_delayed_work() to mod_delayed_work()
- Fix u8 underflows in GPU delta calculation
- Use mutex to protect fan pwm/mode
- Ignore kbd backlight and FnLock key events that are handled by FW
- Fix fan table parsing (use correct field)
- Add support for Omen 14-fb0xxx, 16-n0xxx, 16-wf1xxx, and
Omen MAX 16-ak0xxxx
input: trackpoint & thinkpad_acpi:
- Enable doubletap by default and add sysfs enable/disable
int3472:
- Add support for GPIO type 0x02 (IR flood LED)
intel-speed-select: (updated to v1.26)
- Avoid using current base frequency as maximum
- Fix CPU extended family ID decoding
- Fix exit code
- Improve error reporting
intel/vsec:
- Refactor to support ACPI-enumerated PMT endpoints.
pcengines-apuv2:
- Attach software node to the gpiochip
uniwill:
- Refactor hwmon to smaller parts to accomodate HW diversity
- Support USB-C power/performance priority switch through sysfs
- Add another XMG Fusion 15 (L19) DMI vendor
- Enable fine-grained features to device lineup mapping
wmi:
- Perform output size check within WMI core to allow simpler WMI
drivers
misc:
- acpi_driver -> platform driver conversions (a large number of
changes from Rafael J. Wysocki)
- cleanups / refactoring / improvements"
* tag 'platform-drivers-x86-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (106 commits)
platform/x86: hp-wmi: Add support for Omen 16-wf1xxx (8C77)
platform/x86: hp-wmi: Add support for Omen 16-n0xxx (8A44)
platform/x86: hp-wmi: Add support for OMEN MAX 16-ak0xxx (8D87)
platform/x86: hp-wmi: fix fan table parsing
platform/x86: hp-wmi: add Omen 14-fb0xxx (board 8C58) support
platform/wmi: Replace .no_notify_data with .min_event_size
platform/wmi: Extend wmidev_query_block() to reject undersized data
platform/wmi: Extend wmidev_invoke_method() to reject undersized data
platform/wmi: Prepare to reject undersized unmarshalling results
platform/wmi: Convert drivers to use wmidev_invoke_procedure()
platform/wmi: Add wmidev_invoke_procedure()
platform/x86: int3472: Add support for GPIO type 0x02 (IR flood LED)
platform/x86: int3472: Parameterize LED con_id in registration
platform/x86: int3472: Rename pled to led in LED registration code
platform/x86: int3472: Use local variable for LED struct access
platform/x86: thinkpad_acpi: remove obsolete TODO comment
platform/x86: dell-wmi-sysman: bound enumeration string aggregation
platform/x86: hp-wmi: Ignore backlight and FnLock events
platform/x86: uniwill-laptop: Fix signedness bug
platform/x86: dell_rbu: avoid uninit value usage in packet_size_write()
...
* Improvements
- Reduce transmission size by dropping unnecessary data in
cros_ec_lightbar.
- Convert chromeos_privacy_screen, chromeos_tbmc, and wilco_ec/event
from ACPI drivers to platform drivers.
* Fixes
- Drop wakeup source on remove() in chromeos_tbmc.
* Cleanups
- Simplify workqueue usage with devm in cros_usbpd_logger.
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQS0yQeDP3cjLyifNRUrxTEGBto89AUCadxO8xMcdHp1bmdiaUBr
ZXJuZWwub3JnAAoJECvFMQYG2jz0OVoBAPtLHW2L473NZlD6JLwq3YPu2+6SJcZ1
5lh7X26mVNTZAQCNsphLzHhGm9aFQQsAaz+MUUwPahuFI3ezqFOiEiCKDg==
=oxrT
-----END PGP SIGNATURE-----
Merge tag 'chrome-platform-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Tzung-Bi Shih:
"Improvements:
- Reduce transmission size by dropping unnecessary data in
cros_ec_lightbar
- Convert chromeos_privacy_screen, chromeos_tbmc, and wilco_ec/event
from ACPI drivers to platform drivers
Fixes:
- Drop wakeup source on remove() in chromeos_tbmc
Cleanups:
- Simplify workqueue usage with devm in cros_usbpd_logger"
* tag 'chrome-platform-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_usbpd_logger: Simplify with devm
platform/chrome: wilco_ec: event: Convert to a platform driver
platform/chrome: wilco_ec: event: Register ACPI notify handler
platform/chrome: chromeos_tbmc: Convert to a platform driver
platform/chrome: chromeos_tbmc: Register ACPI notify handler
platform/chrome: chromeos_tbmc: Drop wakeup source on remove
platform/chrome: Convert ChromeOS privacy-screen driver to platform
platform/chrome: lightbar: Optimize command size
-----BEGIN PGP SIGNATURE-----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=3RtB
-----END PGP SIGNATURE-----
Merge tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- new CSI tegra support, covering Tegra20 and Tegra30
- new camera sensor drivers: T4ka3 and ov2732
- m88ds3103: add 3103c chip support
- uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format
- synopsys csi2rx: add i.MX93 support
- imx8-isi: add i.MX95 support
- imx8mq-mipi-csi2: add i.MX8ULP support
- dw100: add V4L2 requests support
- support for DTV devices from Hauppauge got some improvements
- media staging: dropped starfive-camss driver
- media docs: document multi-committers model and improve maint profile
- media core:
- add v4l2_subdev_get_frame_desc_passthrough() helper
- improve error handling in fwnode parsing
- lots of driver fixes, cleanups and improvements
* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
media: synopsys: csi2rx: add i.MX93 support
media: dt-bindings: add NXP i.MX93 compatible string
media: synopsys: csi2rx: Use enum and u32 array for register offsets
media: synopsys: csi2rx: implement .get_frame_desc() callback
media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
media: i2c: imx283: add support for non-continuous MIPI clock mode
media: i2c: ov08d10: add support for 24 MHz input clock
media: i2c: ov08d10: add support for reset and power management
media: i2c: ov08d10: add support for binding via device tree
dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
media: i2c: ov08d10: add missing newline to prints
media: i2c: ov08d10: fix some typos in comments
media: i2c: ov08d10: remove duplicate register write
media: i2c: ov08d10: fix image vertical start setting
media: i2c: ov08d10: fix runtime PM handling in probe
staging: media: ipu7: Update TODO
media: Add t4ka3 camera sensor driver
media: i2c: Add ov2732 image sensor driver
...
The HP Omen 16-wf1xxx (board ID: 8C77) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8C77 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Thomas Arici <absolute3d86@gmail.com>
Reported-by: Thomas Arici <absolute3d86@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221300
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-5-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-n0xxx (board ID: 8A44) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile.
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_legacy_thermal_params.
Testing on board 8A44 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Prasoon Dev <prasoon5050@outlook.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-4-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP OMEN MAX 16-ak0xxx (8D87) requires the same WMI queries as other
Victus S devices, hence it has been added to the corresponding list.
For this reason, platform_profile_victus_s_get_ec() will be called
during thermal_profile_setup() and victus_s_powersource_event() to
obtain hardware state (platform profile) by reading from the Embedded
Controller, however, this particular board's EC does not seem to expose
the platform profile value, unlike other boards. Hence EC readback is
disabled.
Testing on board 8D87 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Jinyang Zhu <Jakie101@proton.me>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-3-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
For Victus S devices, the BIOS fan table header was being incorrectly
parsed as:
struct {
u8 unknown;
u8 num_entries;
}
The first field should be num_fans and the second should be unknown. It
is pure coincidence that interpreting an "unknown" field as "num_entries"
worked on multiple device, however for board 8D87 (in an upcoming patch),
this assumption fails, and the hp-wmi driver fails to load.
We fix this by correcting the header definition and compensating for
num_entries by parsing each entry of the fan table until an all-NULL row
is obtained, mirroring the behavior of OMEN Gaming Hub on Windows.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260410191039.125659-2-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
- Update maintainers information regarding ACPICA (Rafael Wysocki)
- Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy() (Kees
Cook)
- Trigger an ordered system power off after encountering a fatal error
operator in AML (Armin Wolf)
- Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
- Remove the temporary stop-gap acpi_pptt_cache_v1_full structure from
the ACPI PPTT parser (Ben Horgan)
- Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
DeSimone)
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in target
callbacks to allow it to control performance bounds via standard
scaling_min_freq and scaling_max_freq sysfs attributes and add sysfs
documentation for the Performance Limited Register to it (Sumit Gupta)
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a platform
device for the CMOS RTC, and drop CMOS RTC PNP device support (Rafael
Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
- Clean up the ACPI TAD driver in various ways and add an RTC class
device interface, including both the RTC setting/reading and alarm
timer support, to it (Rafael Wysocki)
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
- Consolidate the interface for obtaining a CPU UID from ACPI across
architectures and use it to address incorrect PCI TPH Steering Tag
on ARM64 resulting from the invalid assumption that the ACPI
Processor UID would always be the same as the corresponding logical
CPU ID in Linux (Chengwen Feng)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmnY/bcSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1chAH/1cGRzh9lSgQ3ZdzIIA5rpRtwKC+CTNz
iNDvQ97W73B2N+WYzMaloOh+ZVA1Vdqc+8921aH6HI+v7wtg/ZV3h/hU7TagHNY/
bRFDYaeRXVj4aBXNfoVdn7G5UU9j/kIDcV25I2ubOBqZaO6T5p8p1BK0j0vEj+sG
yR7XwpEhr2OUQwlIFGKskJwFaH57QJXPEY8wf+o+lMEx/7o/JQRJzKFwsYu01ZZV
kQy9Ee08P/rsNJwU2ibmZu5P3JMnhategAT8VAMBvkfLScv2sKX+1Vz19NGXzm71
ARaT7y8MSPNb7SAvWmNZ/rVYrYIL+D3a76Gd7MOGrbVWEn6oXIbCIhY=
=6vEK
-----END PGP SIGNATURE-----
Merge tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support updates from Rafael Wysocki:
"These include an update of the CMOS RTC driver and the related ACPI
and x86 code that, among other things, switches it over to using the
platform device interface for device binding on x86 instead of the PNP
device driver interface (which allows the code in question to be
simplified quite a bit), a major update of the ACPI Time and Alarm
Device (TAD) driver adding an RTC class device interface to it, and
updates of core ACPI drivers that remove some unnecessary and not
really useful code from them.
Apart from that, two drivers are converted to using the platform
driver interface for device binding instead of the ACPI driver one,
which is slated for removal, support for the Performance Limited
register is added to the ACPI CPPC library and there are some
janitorial updates of it and the related cpufreq CPPC driver, the ACPI
processor driver is fixed and cleaned up, and NVIDIA vendor CPER
record handler is added to the APEI GHES code.
Also, the interface for obtaining a CPU UID from ACPI is consolidated
across architectures and used for fixing a problem with the PCI TPH
Steering Tag on ARM64, there are two updates related to ACPICA, a
minor ACPI OS Services Layer (OSL) update, and a few assorted updates
related to ACPI tables parsing.
Specifics:
- Update maintainers information regarding ACPICA (Rafael Wysocki)
- Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()
(Kees Cook)
- Trigger an ordered system power off after encountering a fatal
error operator in AML (Armin Wolf)
- Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
- Remove the temporary stop-gap acpi_pptt_cache_v1_full structure
from the ACPI PPTT parser (Ben Horgan)
- Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
DeSimone)
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael
Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit
Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in
target callbacks to allow it to control performance bounds via
standard scaling_min_freq and scaling_max_freq sysfs attributes and
add sysfs documentation for the Performance Limited Register to it
(Sumit Gupta)
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a
platform device for the CMOS RTC, and drop CMOS RTC PNP device
support (Rafael Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
- Clean up the ACPI TAD driver in various ways and add an RTC class
device interface, including both the RTC setting/reading and alarm
timer support, to it (Rafael Wysocki)
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver
(Rafael Wysocki)
- Update the ACPI core device drivers to stop setting
acpi_device_name() unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver
to bind to platform devices instead of ACPI devices (Rafael
Wysocki)
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
- Consolidate the interface for obtaining a CPU UID from ACPI across
architectures and use it to address incorrect PCI TPH Steering Tag
on ARM64 resulting from the invalid assumption that the ACPI
Processor UID would always be the same as the corresponding logical
CPU ID in Linux (Chengwen Feng)"
* tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
ACPICA: Update maintainers information
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: processor: idle: Reset cpuidle on C-state list changes
cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
PCI/TPH: Pass ACPI Processor UID to Cache Locality _DSM
ACPI: PPTT: Use acpi_get_cpu_uid() and remove get_acpi_id_for_cpu()
perf: arm_cspmu: Switch to acpi_get_cpu_uid() from get_acpi_id_for_cpu()
ACPI: Centralize acpi_get_cpu_uid() declaration in include/linux/acpi.h
x86/acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
RISC-V: ACPI: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
LoongArch: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
arm64: acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
ACPI: tables: Enable FPDT on LoongArch
ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
ACPI: processor: idle: Reset power_setup_done flag on initialization failure
ACPI: TAD: Add alarm support to the RTC class device interface
...
- debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
- device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
- devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
- driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes
a potential UAF from unsynchronized access to driver_override in
bus match() callbacks
- Simplify __device_set_driver_override() logic
- kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs
file and directory removal
- Add corresponding selftests for memcg
- platform:
- Allow attaching software nodes when creating platform devices via
a new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
- software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
- SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
- sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
- Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and
the unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable
in code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations
for IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool conversion,
and const get()
- Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCadl5SwAKCRBFlHeO1qrK
LpjDAQCSG3vYznwrngfpmRU5bCB9sdUy/pZiX5px1357+amJkwEA9LgIVQvtHAZW
ZXcQ7Jr+mR3mJEdlatbkWHp3w1VHqAQ=
=y1DV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes a
potential UAF from unsynchronized access to driver_override in bus
match() callbacks
- Simplify __device_set_driver_override() logic
kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
and directory removal
- Add corresponding selftests for memcg
platform:
- Allow attaching software nodes when creating platform devices via a
new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and the
unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable in
code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
Example:
```
register! {
/// UART control register.
CTRL(u32) @ 0x18 {
/// Receiver enable.
19:19 rx_enable => bool;
/// Parity configuration.
14:13 parity ?=> Parity;
}
/// FIFO watermark and counter register.
WATER(u32) @ 0x2c {
/// Number of datawords in the receive FIFO.
26:24 rx_count;
/// RX interrupt threshold.
17:16 rx_water;
}
}
impl WATER {
fn rx_above_watermark(&self) -> bool {
self.rx_count() > self.rx_water()
}
}
fn init(bar: &pci::Bar<BAR0_SIZE>) {
let water = WATER::zeroed()
.with_const_rx_water::<1>(); // > 3 would not compile
bar.write_reg(water);
let ctrl = CTRL::zeroed()
.with_parity(Parity::Even)
.with_rx_enable(true);
bar.write_reg(ctrl);
}
fn handle_rx(bar: &pci::Bar<BAR0_SIZE>) {
if bar.read(WATER).rx_above_watermark() {
// drain the FIFO
}
}
fn set_parity(bar: &pci::Bar<BAR0_SIZE>, parity: Parity) {
bar.update(CTRL, |r| r.with_parity(parity));
}
```
- IRQ:
- Move 'static bounds from where clauses to trait declarations for
IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool
conversion, and const get()
Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation"
* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
bus: fsl-mc: use generic driver_override infrastructure
s390/ap: use generic driver_override infrastructure
s390/cio: use generic driver_override infrastructure
vdpa: use generic driver_override infrastructure
platform/wmi: use generic driver_override infrastructure
PCI: use generic driver_override infrastructure
driver core: make software nodes available earlier
software node: remove software_node_exit()
kernel: ksysfs: initialize kernel_kobj earlier
MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
drivers/base/memory: fix stale reference to memory_block_add_nid()
device property: Document how to check for the property presence
soundwire: debugfs: initialize firmware_file to empty string
debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
debugfs: check for NULL pointer in debugfs_create_str()
driver core: Make deferred_probe_timeout default a Kconfig option
driver core: simplify __device_set_driver_override() clearing logic
driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
device property: Make modifications of fwnode "flags" thread safe
rust: devres: embed struct devres_node directly
...
Board 8C58 (HP Omen Transcend Gaming Laptop 14-fb0xxx) appears to use
the same thermal profile handling as other supported Omen systems,
including board 8E41.
Add it to omen_thermal_profile_boards so hp-wmi can expose the firmware
thermal profiles through the platform_profile interface.
Tested on Omen 14-fb0xxx: the profile handler exposes cool, balanced,
and performance modes, and selecting performance increases sustained CPU
package power under load.
Signed-off-by: Shaun Varghese <shaunvarghese43@gmail.com>
Link: https://patch.msgid.link/20260410174651.1424000-1-shaunvarghese43@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
WMI drivers using the buffer-based WMI API are expected to reject
undersized event payloads. Extend the WMI driver core to allow
such drivers to specify their minimum supported event payload size.
Also remove the now redundant .no_notify_data field.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260406203237.2970-7-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
WMI drivers using the buffer-based WMI API are expected to reject
undersized query results. Extend wmidev_query_block() to enable
the WMI driver core to perform this size check internally.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260406203237.2970-6-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
WMI drivers using the buffer-based WMI API are expected to reject
undersized method return values. Extend wmidev_invoke_method() to
enable the WMI driver core to perform this size check internally.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260406203237.2970-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Driver using the buffer-based WMI API usually reject buffers resulting
from WMI method calls or block queries if they contain not enough data.
Prepare the WMI core for assisting in this by automatically rejecting
undersized unmarshalling results.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260406203237.2970-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert users of wmidev_invoke_method() to wmidev_invoke_procedure()
where applicable to prepare for future changes.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260406203237.2970-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some WMI methods return no values, so the whole postprocessing
of the result data is not needed for them. Add a special function
for calling such WMI methods to prepare for future changes of
the main wmidev_invoke_method() function.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260406203237.2970-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add support for GPIO type 0x02, which controls an IR flood LED used
for face authentication on some laptops (e.g. Dell Pro Max 16 Premium).
Without this patch, the kernel logs "GPIO type 0x02 unknown; the sensor
may not work" and IR sensors paired with a flood LED cannot function.
The flood LED is registered through the LED subsystem like the existing
privacy LED, including a lookup entry to allow future consumer drivers
to find and control it via led_get().
To support multiple LEDs per INT3472 device, convert the single led
struct member to an array with a counter.
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260401203638.1601661-5-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a con_id parameter to skl_int3472_register_led() to allow callers
to specify both the LED name suffix and lookup con_id instead of
hardcoding "privacy". This prepares for registering additional LED
types with different names.
While at it, rename the privacy LED's GPIO con_id from "privacy-led"
to "privacy" in int3472_get_con_id_and_polarity() and pass it
directly to skl_int3472_register_led(), reducing churn when adding
new LED types.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-4-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename the privacy LED type, struct member, and functions from "pled"
to "led" in preparation for supporting additional LED types beyond
just the privacy LED.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-3-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Introduce a local struct int3472_pled pointer in the LED registration,
unregistration, and brightness callback functions to avoid repeatedly
dereferencing int3472->pled. In the brightness callback, use
container_of() to get the int3472_pled struct directly instead of
going through int3472_discrete_device.
No functional change.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Marco Nenciarini <mnencia@kcore.it>
Link: https://patch.msgid.link/20260401203638.1601661-2-mnencia@kcore.it
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Merge ACPI core driver core driver updates and assorted driver updates
related to ACPI support for 7.1-rc1:
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver (Rafael
Wysocki)
- Update the ACPI core device drivers to stop setting acpi_device_name()
unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver to
bind to platform devices instead of ACPI devices (Rafael Wysocki)
* acpi-driver:
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: AC: Define ACPI_AC_CLASS in one place
ACPI: driver: Do not set acpi_device_class() unnecessarily
ACPI: driver: Avoid using pnp.device_class for netlink handling
ACPI: event: Redefine acpi_notifier_call_chain()
ACPI: driver: Do not set acpi_device_name() unnecessarily
ACPI: video: Consolidate pnp.bus_id workarounds handling
ACPI: video: Rework checking for duplicate video bus devices
driver core: auxiliary bus: Introduce dev_is_auxiliary()
ACPI: PAD: Rearrange notify handler installation and removal
ACPI: AC: Get rid of unnecessary declarations
This patch removes the obsolete TODO comment regarding fan speed
presets in fan_write_cmd_speed. After discussion with the
maintainers, it was decided that fixed presets (low/medium/high)
are not suitable due to platform-specific variations.
Signed-off-by: Daniil Bulgar <bulgardaniil18@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260407190546.109900-1-bulgardaniil18@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
populate_enum_data() aggregates firmware-provided value-modifier
and possible-value strings into fixed 512-byte struct members.
The current code bounds each individual source string but then
appends every string and separator with raw strcat() and no
remaining-space check.
Switch the aggregation loops to a bounded append helper and
reject enumeration packages whose combined strings do not fit
in the destination buffers.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260408084501.1-dell-wmi-sysman-v2-pengpeng@iscas.ac.cn
[ij: add include]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On HP OmniBook 7 the keyboard backlight and FnLock keys are handled
directly by the firmware. However, they still trigger WMI events which
results in "Unknown key code" warnings in dmesg.
Add these key codes to the keymap with KE_IGNORE to silence the warnings
since no software action is needed.
Tested-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221181
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260403080155.169653-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The function sysfs_match_string() can return negative error codes and
the variable assigned to it is the enum 'option'. Which could be an
unsigned int due to different compiler implementations.
Assign signed variable 'ret' to sysfs_match_string(), check for error,
then assign ret to option.
Detected by Smatch:
drivers/platform/x86/uniwill/uniwill-acpi.c:919 usb_c_power_priority_store()
warn: unsigned 'option' is never less than zero.
Fixes: 03ae0a0d09 ("platform/x86: uniwill-laptop: Implement USB-C power priority setting")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260403070928.802196-1-ethantidmore06@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Ensure the temp value has been properly parsed from the user-provided
buffer and initialized to be used in later operations. While at it,
prefer a convenient kstrtoul() helper.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: ad6ce87e5b ("[PATCH] dell_rbu: changes in packet update mechanism")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260403134240.604837-1-pchelkin@ispras.ru
[ij: add include]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_hwmon_priv.mode and .pwm are written by hp_wmi_hwmon_write() in
sysfs context and read by hp_wmi_hwmon_keep_alive_handler() in a
workqueue. A concurrent write and keep-alive expiry can observe an
inconsistent mode/pwm pair (e.g. mode=MANUAL with a stale pwm).
Add a mutex to hp_wmi_hwmon_priv protecting mode and pwm. Hold it in
hp_wmi_hwmon_write() across the field update and apply call, and in
hp_wmi_hwmon_keep_alive_handler() before calling apply.
In hp_wmi_hwmon_read(), only the pwm_enable path reads priv->mode; use
scoped_guard() there to avoid holding the lock across unrelated WMI
calls.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-6-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
gpu_delta was declared as u8. If the firmware specifies a GPU RPM
lower than the CPU RPM, subtracting them causes an underflow
(e.g. 10 - 20 = 246), which forces the GPU fan to remain clamped at
U8_MAX (100% speed) during operation.
Change gpu_delta to int and use signed arithmetic. Existing signed logic
in hp_wmi_fan_speed_set() correctly handles negative deltas.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-5-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, schedule_delayed_work() is used to queue the 90s keep-alive
timer. If a user manually changes the fan speed at T=85s,
schedule_delayed_work() leaves the existing timer in place as it is a
no-op if the work is already pending. This results in the keep-alive
timer firing unnecessarily at T=90s, just 5 seconds after the user
action.
Replace schedule_delayed_work() with mod_delayed_work() to reset the
90s timer whenever fan settings are applied. This guarantees a full 90s
delay after every user interaction, preventing redundant keep-alive
executions and improving efficiency.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-4-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_apply_fan_settings() uses cancel_delayed_work_sync() to stop
the keep-alive timer in AUTO mode. However, since
hp_wmi_apply_fan_settings() is also called from the keep-alive
handler, a race condition with a sysfs write can cause the handler to
wait on itself, leading to a deadlock.
Replace cancel_delayed_work_sync() with cancel_delayed_work() in
hp_wmi_apply_fan_settings() to avoid the self-flush deadlock.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-3-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_get_fan_count_userdefine_trigger() can fail, but its return
value was silently ignored in hp_wmi_apply_fan_settings() for
PWM_MODE_MAX/AUTO. Propagate these errors consistently.
Additionally, handle the return value of hp_wmi_apply_fan_settings()
in its callers by adding appropriate warnings on failure, and remove an
unreachable "return 0" at the end of the function.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-2-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In calculate_security_buffer(), call strlen() once and use ALIGN() to
round up to an even size.
In populate_security_buffer(), also avoid recomputing strlen(), rename
the u32 pointer from 'seclen' to 'seclenp' to avoid confusion with the
new length variable, and drop the memcpy() guard since calling it with
size 0 is a no-op and therefore safe.
Use 'const char *' for the read-only source string in both helpers.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260331160310.608857-3-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There is no point in registering an ACPI driver that only has an empty
.add() callback, which is done by the thinkpad_acpi driver, since
after binding to an ACPI device it only sits there and does nothing.
That binding only effectively causes the ACPI device's reference count
to increase, but that can be achieved by using acpi_get_acpi_dev()
instead of acpi_fetch_acpi_dev() in setup_acpi_notify(), and doing
the corresponding cleanup in ibm_exit().
Update the code accordingly and get rid of the non-functional ACPI
driver.
No intentional functional impact beyond altering sysfs content.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/3949487.kQq0lBPeGt@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Asus wireless ACPI driver to a platform
one.
After this change, the subordinate input and LED devices will be
registered under the platform device used for driver binding instead of
its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/13959361.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/1949745.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Asus laptop ACPI driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/2402539.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/5082508.31r3eYUQgx@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 12046f8c77 ("platform/x86: wmi: Add driver_override support")
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/20260324005919.2408620-7-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Toshiba HDD Active Protection Sensor
driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Note that the sysfs attributes in haps_attr_group will still be there
in the sysfs directory of the ACPI companion of the platform device
used for driver binding in case there are tools in user space expecting
them to be present there.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2045343.PYKUYFuaPT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10834562.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Toshiba Bluetooth Enable driver from an
ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3420881.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3048289.e9J7NaK4W3@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Toshiba Laptop ACPI Extras driver from
an ACPI driver to a platform one.
After this change, all of the subordinate hwmon, IIO, and LED class
devices will be registered under the platform device used for driver
binding instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
However, the sysfs attributes in toshiba_attr_group will still be there
in the sysfs directory of the ACPI companion of the platform device used
for driver binding to maintain backwards compatibility with possibly
existing user space utilities depending on the presence of those
attributes.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2269772.irdbgypaU6@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5070377.GXAFRqVoOG@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the definition of toshiba_acpi_notify() before the definitions of
the functions that will refer to it after subsequent updates to avoid
having to add a forward declarations of it.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4734258.LvFx2qVVIh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The memory write feature supports 32-bit writes to any TPMI offset.
However, future hardware generations may not allow writes to non-32-bit
aligned addresses due to hardware optimizations.
Since all TPMI addresses are 64-bit aligned and correspond to 64-bit
registers, enforce 32-bit alignment for write operations.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260326182446.3478672-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Uses the more fine granular and/or new feature defines to enable more
features across the TUXEDO device lineup.
Also adds features to TUXEDO devices that where already present in the
driver, but not tested until now.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-5-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add alternative XMG Fusion system vendor name and clarify edition in ident.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-4-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some devices Uniwill offers the option to set the USB-C port to
prioritise charging or performance. This patch exposes this setting to the
userspace via sysfs for all TUXEDO devices supporting it.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-3-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Split hwmon feature define in smaller parts to accommodate for diverse
hardware. You can now specify the presence of a cpu and/or a gpu temp
sensor separately and if one or 2 fans exists.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Werner Sembach <wse@tuxedocomputers.com>
Tested-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260324203413.454361-2-wse@tuxedocomputers.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes and New HW Support
- amd/hsmp: Fix typo in error message
- asus-armoury: Add support for G614FP, GA503QM, GZ302EAC, and GZ302EAC
- asus-nb-wmi: Add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
- hp-wmi: Support for Omen 16-k0xxx, 16-wf1xxx, 16-xf0xxx
- intel-hid: Disable wakeup_mode during hibernation
- ISST:
- Check HWP support before MSR access
- Correct locked bit width
- lenovo: wmi-gamezone: Drop unused gz_chain_head
- olpc-xo175-ec: Fix overflow error message
The following is an automated shortlog grouped by driver:
amd/hsmp:
- Fix typo in error message
asus-armoury:
- add support for G614FP
- add support for GA503QM
- add support for GZ302EA and GZ302EAC
asus-nb-wmi:
- add DMI quirk for ASUS ROG Flow Z13-KJP GZ302EAC
hp-wmi:
- Add Omen 16-xf0xxx (8BCA) support
- Add support for Omen 16-k0xxx (8A4D)
- Add support for Omen 16-wf1xxx (8C76)
intel-hid:
- disable wakeup_mode during hibernation
ISST:
- Check HWP support before MSR access
- Correct locked bit width
lenovo: wmi-gamezone:
- Drop gz_chain_head
MAINTAINERS:
- change email address of Denis Benato
olpc: olpc-xo175-ec:
- Fix overflow error message to print inlen
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCacPa+wAKCRBZrE9hU+XO
Mf/1AP9M2dbDElMJQtS8wrcyML5xgGGInfzXACXaQKhVV6ZYugD8DDDdxdtreT+E
1eb8adT4cyGTW8s2YvJFeAD3FXY+FgU=
=ktTR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCacvZhgAKCRBZrE9hU+XO
MQNHAP4yxM/7280O22QTWRSLGbaCkpxYiyXuo/7Vp/LUnVAbVQD+K0FCXj2A1pWW
IXjfKpmDExlnzrO1L5g/4v+/d1zr7gI=
=MOOt
-----END PGP SIGNATURE-----
Merge tag 'fixes' into 'for-next'
Allows uniwill-laptop feature work that depends on changes in the fixes
branch proceed.
Add TDP data for laptop model GU605MU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260329124659.3967495-4-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model FA607NU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260329124659.3967495-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model GV302XU.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260329124659.3967495-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix screenpad brightness range being too limited without reason:
testing this patch on a Zenbook Duo showed the hardware minimum not being
too low, therefore allow the user to configure the entire range, and
expose to userspace the hardware brightness range and value.
Fixes: 2c97d3e55b ("platform/x86: asus-wmi: add support for ASUS screenpad")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20260302174431.349816-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix illogical screen off control by hardcoding 0 and 1 depending on the
requested brightness and also do not rely on the last screenpad power
state to issue screen brightness commands.
Fixes: 2c97d3e55b ("platform/x86: asus-wmi: add support for ASUS screenpad")
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Signed-off-by: Luke Jones <luke@ljones.dev>
Link: https://patch.msgid.link/20260302174431.349816-2-denis.benato@linux.dev
Link: https://patch.msgid.link/20260326231154.856729-2-ethantidmore06@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This platform is a similar vintage of platforms that had a BIOS bug
leading to a 10s delay at resume from s0i3.
Add a quirk for it.
Reported-by: Imrane <ihalim.me@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221273
Tested-by: Imrane <ihalim.me@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260324211647.357924-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current implementation doesn't require any changes to support minor
version 3, hence increment it to avoid "Unsupported minor version:3"
message.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260325193158.3417382-2-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The current implementation doesn't require any changes to support minor
version 3, hence increment it to avoid "Unsupported minor version:3"
message.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260325193158.3417382-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When the AUTONOMOUS_UFS_DISABLED bit is set in the header, the ELC
(Efficiency Latency Control) feature is non-functional. Hence, return
error for read or write to ELC attributes.
Fixes: bb516dc79c ("platform/x86/intel-uncore-freq: Add support for efficiency latency control")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260325192909.3417322-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Based on feature revision, number of buckets can be less than the
TRL_MAX_BUCKETS. In that case core counts in the remaining buckets
can be set to some invalid values.
Hence reset core count to 0 for all buckets before assigning correct
values.
Fixes: 885d1c2a30 ("platform/x86: ISST: Support SST-TF revision 2")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260325192638.3417281-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A few fields in structs containing regulator initialisation data for Dell
laptops are initialised to 0 and NULL. Drop the explicit initialisation as
redundant.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Define regulators and gpio for ov5675 in MSI Prestige 14 AI EVO+ laptop.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
[Sakari Ailus: Drop redundant initialisation to 0 and NULL.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The tps68470 supports i2c daisy chain, which need to be configured by
gpio-tps68470 driver. Add daisy chain information to software node.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Users are complaining for the battery limit being reset at 100% during
the boot process while the general consensus appears to not apply
unsolicited hardware changes, therefore stop resetting the battery
charge limit at boot and return -ENODATA on charge_end_threshold to
signal for an unknown limit.
Suggested-by: Antheas Kapenekakis <lkml@antheas.dev>
Suggested-by: Derek J. Clark <derekjohn.clark@gmail.com>
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Reviewed-by: Derek J. Clark <derekjohn.clark@gmail.com>
Tested-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260304132608.33815-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a new driver for Bitland laptops that utilize the MIFS (MiInterface)
WMI interface.
The driver implements several features through the WMI interface:
- Platform Profile: Supports "Quiet", "Balanced", "Performance", and
"Full Speed" modes. The "Full Speed" mode is intelligently restricted
based on the AC adapter type (requires DC power, not supported on
USB-C charging) as required by the hardware.
- Hwmon: Provides monitoring for CPU, GPU, and System fan speeds,
as well as CPU temperature sensors.
- Keyboard Backlight: Integrated with the LED class device for
brightness control and provides sysfs attributes for keyboard modes
(cyclic, fixed, etc.).
- GPU Mode: Allows switching between Hybrid, Discrete, and UMA
graphics modes via sysfs.
- Hotkeys: Handles WMI events for system hotkeys (Calculator, Browser,
App launch) using sparse keymaps and reports status changes for
Airplane mode, Touchpad, and CapsLock.
- Fan Boost: Provides a sysfs interface to force fans to maximum speed.
The driver registers two WMI GUIDs:
- B60BFB48-3E5B-49E4-A0E9-8CFFE1B3434B: Control methods
- 46C93E13-EE9B-4262-8488-563BCA757FEF: Event notifications
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Mingyou Chen <qby140326@gmail.com>
Link: https://patch.msgid.link/20260323132218.444383-1-qby140326@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
SST-PP locked bit width is set to three bits. It should be only one bit.
Use SST_PP_LOCK_WIDTH define instead of SST_PP_LEVEL_WIDTH.
Fixes: ea009e4769 ("platform/x86: ISST: Add SST-PP support via TPMI")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260323153635.3263828-1-srinivas.pandruvada@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a freeze handler which clears wakeup_mode. This fixes aborted hibernation on
Dell Precision 3880.
Wakeup event detected during hibernation, rolling back
This system sends power button events during hibernation, even when triggered by
software.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218634
Fixes: 0c4cae1bc0 ("PM: hibernate: Avoid missing wakeup events during hibernation")
Signed-off-by: David McFarland <corngood@gmail.com>
Link: https://patch.msgid.link/20260205231629.1336348-1-corngood@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for tablet models GZ302EA and GZ302EAC.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260313004939.4103835-1-matthew.schwartz@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ASUS ROG Flow Z13-KJP GZ302EAC model uses sys_vendor name ASUS
rather than ASUSTeK COMPUTER INC., but it needs the same folio quirk as
the other ROG Flow Z13. To keep things simple, just match on sys_vendor
ASUS since it covers both.
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260312212246.1608080-1-matthew.schwartz@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix a typo in the HSMP error message where "tmeout" should be "timeout".
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20260310125307.700108-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The gz_chain_head variable has been unused since the driver's initial
addition to the tree. Its use was eliminated between v3 and v4 during
development but due to the reference of gz_chain_head's wait_list
member, the compiler could not warn that it was unused.
After a (tip) commit ("locking/rwsem: Remove the list_head from struct
rw_semaphore"), which removed a reference to the variable passed to
__RWSEM_INITIALIZER(), certain configurations show an unused variable
warning from the Lenovo wmi-gamezone driver:
drivers/platform/x86/lenovo/wmi-gamezone.c:34:31: warning: 'gz_chain_head' defined but not used [-Wunused-variable]
34 | static BLOCKING_NOTIFIER_HEAD(gz_chain_head);
| ^~~~~~~~~~~~~
include/linux/notifier.h:119:39: note: in definition of macro 'BLOCKING_NOTIFIER_HEAD'
119 | struct blocking_notifier_head name = \
| ^~~~
Remove the variable to prevent the warning from showing up.
Fixes: 22024ac536 ("platform/x86: Add Lenovo Gamezone WMI Driver")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260313-lenovo-wmi-gamezone-remove-gz_chain_head-v1-1-ce5231f0c6fa@kernel.org
[ij: reorganized the changelog]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On some systems, HWP can be explicitly disabled in the BIOS settings
When HWP is disabled by firmware, the HWP CPUID bit is not set, and
attempting to read MSR_PM_ENABLE will result in a General Protection
(GP) fault.
unchecked MSR access error: RDMSR from 0x770 at rIP: 0xffffffffc33db92e (disable_dynamic_sst_features+0xe/0x50 [isst_tpmi_core])
Call Trace:
<TASK>
? ex_handler_msr+0xf6/0x150
? fixup_exception+0x1ad/0x340
? gp_try_fixup_and_notify+0x1e/0xb0
? exc_general_protection+0xc9/0x390
? terminate_walk+0x64/0x100
? asm_exc_general_protection+0x22/0x30
? disable_dynamic_sst_features+0xe/0x50 [isst_tpmi_core]
isst_if_def_ioctl+0xece/0x1050 [isst_tpmi_core]
? ioctl_has_perm.constprop.42+0xe0/0x130
isst_if_def_ioctl+0x10d/0x1a0 [isst_if_common]
__se_sys_ioctl+0x86/0xc0
do_syscall_64+0x8a/0x100
entry_SYSCALL_64_after_hwframe+0x78/0xe2
RIP: 0033:0x7f36eaef54a7
Add a check for X86_FEATURE_HWP before accessing the MSR. If HWP is
not available, return true safely.
Fixes: 12a7d2cb81 ("platform/x86: ISST: Add SST-CP support via TPMI")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20260303074635.2218-1-lirongqing@baidu.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-k0xxx (board ID: 8A4D) has the same WMI interface as
other Victus S boards, but requires additional quirks for correctly
switching thermal profile.
Create a new quirk omen_v1_legacy_thermal_params which allows a board to
use Omen V1 thermal values, but rely on the older legacy
HP_OMEN_EC_THERMAL_PROFILE_OFFSET. Add the DMI board name to
victus_s_thermal_profile_boards[] table and map it to the newly added
quirk.
Testing on board 8A4D confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: Qinfeng Wu <qwqgong@gmail.com>
Reported-by: Qinfeng Wu <qwqgong@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221150
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260302073525.71037-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-wf1xxx (board ID: 8C76) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to board 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on board 8C76 confirmed that platform profile is registered
successfully and fan RPMs are readable and controllable.
Tested-by: WJ Enderlava <jie7172585@gmail.com>
Reported-by: WJ Enderlava <jie7172585@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221149
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260227154106.226809-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-xf0xxx board 8BCA uses the same Victus-S fan and
thermal WMI path as other recently supported Omen/Victus boards,
but it requires Omen v1 thermal profile parameters for correct
platform profile behavior.
Add board 8BCA to victus_s_thermal_profile_boards[] and map it
to omen_v1_thermal_params.
Validated on HP Omen 16-xf0xxx (board 8BCA):
- /sys/firmware/acpi/platform_profile exposes
low-power/balanced/performance
- fan RPM reporting works (fan1_input/fan2_input)
- manual fan control works through hp-wmi hwmon (pwm1/pwm1_enable)
Signed-off-by: Raed <thisisraed@outlook.com>
Link: https://patch.msgid.link/20260311131338.965249-1-youaretalkingtoraed@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model G614FP.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260309183559.433555-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model GA503QM.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260309183559.433555-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Using guard notation simplifies control flow and makes the code clearer.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260318-barco-p50-gpio-set-v2-2-c0a4a6416163@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by p50_gpio_get() is normalized
to the [0, 1] range.
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260318-barco-p50-gpio-set-v2-1-c0a4a6416163@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This driver includes the legacy header <linux/gpio.h> but does
not use any symbols from it. Drop the inclusion.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260320222033.3238317-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The modern GPIO APIs are available for users via linux/gpio/consumer.h.
The linux/gpio.h is legacy header that is subject to remove. Hence
replace the latter by the former in the driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260320221143.3237791-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Dell Airplane Mode Switch (rbtn) ACPI
driver to a platform one.
After this change, the subordinate rfkill device will be registered
under the platform device used for driver binding instead of its ACPI
companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/6141354.MhkbZ0Pkbq@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9591832.CDJkKcVGEf@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the System76 ACPI driver to a platform one.
After this change, the subordinate hwmon, input and LED class devices
will be registered under the platform device used for driver binding
instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3401648.aeNJFYEL58@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13970743.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Drop two redundant devm_led_classdev_unregister() calls from
system76_remove().
No intentional functional impact.
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5057164.GXAFRqVoOG@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Panasonic laptop ACPI driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
To maintain backwards compatibility with possibly existing user space,
the sysfs attributes created by the driver under the ACPI device object
used by it are not relocated. Accordingly, the driver will continue to
use the driver_data pointer in struct acpi_device which needs to be
cleared on driver removal.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/8664183.T7Z3S40VBb@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/13979037.uLZWGnKmhe@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The device pointer cannot be NULL in acpi_pcc_hotkey_add() and
acpi_pcc_hotkey_remove() because these functions are ACPI driver
callbacks and NULL is never passed to any of them as an argument.
Likewise, acpi_pcc_hotkey_resume() is a resume callback of a
device driver and NULL is never passed to it as an argument, so
the dev pointer in it cannot be NULL.
Moreover, since acpi_pcc_hotkey_remove() and acpi_pcc_hotkey_resume()
can only run after acpi_pcc_hotkey_add() has completed successfully,
the acpi_driver_data() of the device object used by them cannot be
NULL when they run.
Drop all of the redundant NULL checks of the pointers mentioned above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1957824.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
An ACPI notify handler is leaked if device_create_file() returns an
error in acpi_pcc_hotkey_add().
Also, it is pointless to call pcc_unregister_optd_notifier() in
acpi_pcc_hotkey_remove() if pcc->platform is NULL and it is better
to arrange the cleanup code in that function in the same order as
the rollback code in acpi_pcc_hotkey_add().
Address the above by placing the pcc_register_optd_notifier() call in
acpi_pcc_hotkey_add() after the device_create_file() return value
check and placing the pcc_unregister_optd_notifier() call in
acpi_pcc_hotkey_remove() right before the device_remove_file() call.
Fixes: d5a81d8e86 ("platform/x86: panasonic-laptop: Add support for optical driver power in Y and W series")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2411055.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Convert pcc_register_optd_notifier() whose return value is never used to
a void function.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/5093613.31r3eYUQgx@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Simplify the driver by using devm interfaces, which allow to drop
probe() error paths and the remove() callback.
Change is not equivalent in the workqueue itself: use non-legacy API
which does not set (__WQ_LEGACY | WQ_MEM_RECLAIM). The workqueue is
used to update logs, thus there is no point to run it for memory
reclaim.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20260305-workqueue-devm-v2-10-66a38741c652@oss.qualcomm.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the main part of the Fujitsu laptop driver
from an ACPI driver to a platform one.
After this change, the subordinate LED and input devices will be
registered under the platform device used for driver binding instead of
its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://patch.msgid.link/10818905.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the backlight part of the Fujitsu laptop
driver from an ACPI driver to a platform one.
After this change, the backlight and input subordinate devices will be
registered under the platform device used for driver binding instead of
its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://patch.msgid.link/3407755.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to using struct
platform_driver instead of struct acpi_driver, make it install its ACPI
notify handlers directly instead of using struct acpi_driver .notify()
callbacks.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Link: https://patch.msgid.link/3035290.e9J7NaK4W3@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Move the definitions of acpi_fujitsu_bl_notify() and
acpi_fujitsu_laptop_notify() along with some helpers above
the definitions of the functions that will refer to them
after subsequent changes, to avoid having to add forward
declarations of them.
No intentional functional impact.
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1950259.tdWV9SEqCh@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the fujitsu-tablet ACPI driver to a platform
one.
After this change, the subordinate input device will be registered under
the platform device used for driver binding instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Acked-by: Jonathan Woithe <jwoithe@just42.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2403432.ElGaqSPkdT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the airplane mode button for AMD, HP and
Xiaomi laptops driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9607409.CDJkKcVGEf@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3953848.kQq0lBPeGt@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Topstar Laptop ACPI Extras driver from
an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10834824.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3425557.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Programmable IO Control (pic) part of
the Sony laptop driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2059875.yKVeVyVuyW@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Notebook Control (nc) part of the Sony
laptop driver from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/886676729.0ifERbkFSE@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2559802.jE0xQCEvom@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the LG Gram ACPI features and hotkeys driver
from an ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1868365.VLH7GnMWUR@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to using struct
platform_driver instead of struct acpi_driver, drop the debug-only
notify handler method from the driver.
No intentional functional impact beyond debug.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3346280.5fSG56mABF@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some platforms expose PMT discovery via ACPI instead of PCI BARs. Add a
generic discovery source flag and carry ACPI discovery entries alongside
the existing PCI resource path so PMT clients can consume either.
Changes:
- Add enum intel_vsec_disc_source { _PCI, _ACPI }.
- Extend intel_vsec_platform_info and intel_vsec_device with source enum
and ACPI discovery table pointer/
- When src==ACPI, skip BAR resource setup and copy the ACPI discovery
entries into the aux device.
No user-visible behavior change yet; this only wires ACPI data through vsec
in preparation for ACPI-enumerated PMT clients.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-7-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Stop collapsing registration results into booleans. Make
intel_vsec_walk_header() return int and propagate the first non-zero error
from intel_vsec_register_device(). intel_vsec_register() now returns that
error directly and 0 on success.
This preserves success behavior while surfacing meaningful errors instead
of hiding them behind a bool/-ENODEV, which makes debugging and probe
ordering issues clearer.
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-6-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Preparatory refactor for ACPI-enumerated PMT endpoints. Several exported
PMT/VSEC interfaces and structs carried struct pci_dev * even though
callers only need a generic struct device. Move those to struct device * so
the same APIs work for PCI and ACPI parents.
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-5-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This refactor prepares for adding ACPI-enumerated PMT endpoints. While
intel_vsec is bound to PCI today, some helpers are used by code that will
also register PMT endpoints from non-PCI (ACPI) paths. Clean up
PCI-specific plumbing where it isn’t strictly required and rely on generic
struct device where possible.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-4-david.e.box@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Treat PCI id->driver_data (intel_vsec_platform_info) as read-only by making
vsec_priv->info a const pointer and updating all function signatures to
accept const intel_vsec_platform_info *.
This improves const-correctness and clarifies that the platform info data
from the driver_data table is not meant to be modified at runtime.
No functional changes intended.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-3-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The base_addr field in intel_vsec_platform_info was originally added to
support devices that emulate PCI VSEC capabilities in MMIO. Previously,
the code would check at registration time whether base_addr was set,
falling back to the PCI BAR if not.
Refactor this by making base_addr an explicit function parameter. This
clarifies ownership of the value and removes conditional logic from
intel_vsec_add_dev(). It also enables making intel_vsec_platform_info
const in a later patch, since the function no longer needs to write to
info->base_addr.
No functional change intended.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Link: https://patch.msgid.link/20260313015202.3660072-2-david.e.box@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add a sysfs attribute to enable or disable TrackPoint double-tap hotkey
events at the kernel level.
The TrackPoint firmware enables double-tap support automatically. This
interface allows userspace to control whether double-tap events are
forwarded to userspace.
The attribute is available at:
/sys/devices/platform/thinkpad_acpi/doubletap_enable
0 - Disable double-tap hotkey events
1 - Enable double-tap hotkey events (default)
Filtering is implemented by suppressing ACPI hotkey delivery without
injecting synthetic input events.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Suggested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260311143144.482145-3-vishnuocv@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The ACPI_AC_CLASS symbol is defined in several places in the same way
which is rather unfortunate.
Instead, define it in one common header file (acpi_bus.h) so that it is
accessible to all of its users.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/6163384.MhkbZ0Pkbq@rafael.j.wysocki
Replace sprintf() with sysfs_emit() and sysfs_emit_at() in sysfs show
functions. sysfs_emit() and sysfs_emit_at() are preferred for formatting
sysfs output because they provide safer bounds checking.
In reset_bios_show(), use sysfs_emit_at() to avoid manual buffer size
accounting.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260305140912.258090-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Surface Pro 3 button ACPI driver to a
platform one.
After this change, the subordinate input device and wakeup source class
device will be registered under the platform device used for driver
binding instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3207406.CbtlEUcBR6@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1881356.TLkxdtWsSY@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The wakeup source added by device_init_wakeup() in surface_button_add()
needs to be dropped during driver removal, so update the driver to do
that.
Fixes: 19351f3407 ("platform/x86: surfacepro3: Support for wakeup from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4368848.1IzOArtZ34@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Intel Smart Connect disabling ACPI
driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/24282289.6Emhk5qWAg@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Intel Rapid Start Technology (rst) ACPI
driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3599223.QJadu78ljV@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the EEEPC laptop ACPI driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/3329436.5fSG56mABF@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/3681264.iIbC2pHGDl@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Acer wireless ACPI driver to a platform
one.
After this change, the subordinate input device will be registered
under the platform device used for driver binding instead of its ACPI
companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2032103.PYKUYFuaPT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10810967.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
checkpatch.pl reported warnings where seq_printf() was used for simple
strings with no format specifiers.
Replace these instances with seq_puts() to avoid the overhead of runtime
string parsing and to conform to kernel coding standards.
Signed-off-by: Coby McKinney <coby@bytemap.space>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/20260202205214.18898-1-coby@bytemap.space
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ChromeOS Wilco Embedded Controller event
ACPI driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/9600287.CDJkKcVGEf@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/7931926.EvYhyI6sBW@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ChromeOS tablet mode change (TBMC) ACPI
driver to a platform one.
After this change, the subordinate input device and wakeup source class
device will be registered under the platform device used for driver
binding instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/10827297.nUPlyArG6x@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/3413961.aeNJFYEL58@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
The wakeup source added by device_init_wakeup() in chromeos_tbmc_add()
needs to be dropped during driver removal, so add a .remove() callback
to the driver for this purpose.
Fixes: 0144c00ed8 ("platform/chrome: chromeos_tbmc: Report wake events")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/6151957.MhkbZ0Pkbq@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the ChromeOS privacy-screen ACPI driver
to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/1963835.tdWV9SEqCh@rafael.j.wysocki
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Cc: stable@vger.kernel.org
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Link: https://patch.msgid.link/20260303113050.58127-2-thorsten.blum@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
wmi_sysman_kobj_sysfs_ops are identical to the standard kobj_sysfs_ops.
Drop the unnecessary custom copy.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260223-sysfs-const-dell-wmi-sysman-v1-1-8a690884044e@weissschuh.net
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
GPIO subsystem is switching the way it locates GPIO chip instances for
GPIO references in software nodes from matching on node names to
identity matching, which necessitates assigning firmware nodes
(software nodes) to GPIO chips.
Attach apu2_gpiochip_node to the platform device representing the GPIO
controller.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Link: https://patch.msgid.link/aY-oAVI0TubcaD2K@google.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Two x86 platform drivers have unnecessary module_init() and module_exit()
functions that are empty or just print a message. Remove them.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260131020118.46171-1-enelsonmoore@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model FA401UM.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260226141944.352923-3-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add TDP data for laptop model GX650RX.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260226141944.352923-2-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Some systems have much larger amounts of enumeration attributes
than have been previously encountered. This can lead to page allocation
failures when using kcalloc(). Switch over to using kvcalloc() to
allow larger allocations.
Fixes: 6b2770bfd6 ("platform/x86: hp-bioscfg: enum-attributes")
Cc: stable@vger.kernel.org
Reported-by: Paul Kerry <p.kerry@sheffield.ac.uk>
Tested-by: Paul Kerry <p.kerry@sheffield.ac.uk>
Closes: https://bugs.debian.org/1127612
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260225210646.59381-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Aokzoe A2 Pro is an older device that the oxpec driver is missing the
quirk for. It has the same behavior as the AOKZOE A1 devices. Add a
quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-5-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
X1 Air is an X1 variant with a newer Intel chipset. It uses the same
registers as the X1. Add a quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-4-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
X1z is a variant of OneXPlayer X1 A with 8840U. It seems that only one
user has this one. Add a quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-3-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
OneXPlayer Apex is a new Strix Halo handheld. It uses the same registers
as the OneXPlayer Fly devices. Add a quirk for it to the oxpec driver.
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Link: https://patch.msgid.link/20260223183004.2696892-2-lkml@antheas.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On many devices, the user can toggle the Fn lock state by
pressing Fn + Esc. Forward the associated event to the fn_lock
sysfs attribute as a poll notification.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that the FN lock status can be changed by the underlying
hardware when the user presses a special key combination. Mark the
associated register as volatile to prevent regmap from caching said
value. Also add the necessary suspend/resume handling.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On devices that have not UNIWILL_FEATURE_BATTERY set, the underlying
hardware might still send the UNIWILL_OSD_BATTERY_ALERT event. In such
a situation, the driver will access uninitialized data structures when
handling said event.
Prevent this by only handling the UNIWILL_OSD_BATTERY_ALERT event when
UNIWILL_FEATURE_BATTERY is set.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that both sysfs attributes actually directly control
the FN lock status/super key enable status, rather than the
triggering of the associated events. This behavior was first observed
on a Tuxedo notebook and was belived to be a hardware quirk.
However, it seems that i simply misunderstood the manual of the
OEM software for Intel NUC devices. The correct behavior is:
- fn_lock_toggle_enable enables/disables FN lock mode
- super_key_toggle_enable enables/disables the super key
Rename both sysfs attributes to avoid confusing users.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch adds more Fn hotkeys (like Refresh rate toggle).
Additionally, remap the setup key from KEY_SETUP to KEY_CONFIG.
As KEY_CONFIG is supported by Desktop Environments for launching
system settings, whereas KEY_SETUP is often ignored by userspace.
Signed-off-by: Jesse Guo <JesseGuoTech@outlook.com>
Reviewed-by: Gladyshev Ilya <foxido@foxido.dev>
Link: https://patch.msgid.link/TYCPR01MB6851636256C39B170F2312E5D192A@TYCPR01MB6851.jpnprd01.prod.outlook.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Alienware m18 laptops support G-Mode. Therefore, match them with
G-Series quirks.
Cc: stable@vger.kernel.org
Tested-by: Olexa Bilaniuk <obilaniu@gmail.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20260129-m18-gmode-v1-1-48be521487b9@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reverse engineering of the HP Omen Windows utility shows that for performance
mode it uses the same codes listed in hp_thermal_profile_omen_v1. Therefore it
seems sufficient to add the board model name to omen_thermal_profile_boards.
Tested on Omen 14-fb1xxx: CPU power in performance profile reaches the Windows
limit (65W), instead of 45W in automatic BIOS mode. Max fan speed was reached
as well.
Link: https://patch.msgid.link/20260203164832.40514-1-plotnikovanton@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
