rk3066_hdmi.c calls drm_bridge_connector_init(), but
ROCKCHIP_RK3066_HDMI selects neither DRM_BRIDGE_CONNECTOR nor
DRM_DISPLAY_HELPER, whose module carries the bridge-connector code. A
configuration with ROCKCHIP_RK3066_HDMI as the only enabled Rockchip
output option fails to link:
aarch64-linux-gnu-ld: drivers/gpu/drm/rockchip/rk3066_hdmi.o: in function `rk3066_hdmi_bind':
rk3066_hdmi.c:(.text+0x7a4): undefined reference to `drm_bridge_connector_init'
aarch64-linux-gnu-ld: drivers/gpu/drm/rockchip/rk3066_hdmi.o: in function `rk3066_hdmi_bridge_atomic_enable':
rk3066_hdmi.c:(.text+0xe74): undefined reference to `drm_atomic_helper_connector_hdmi_update_infoframes'
Select both, like ROCKCHIP_CDN_DP, ROCKCHIP_LVDS and ROCKCHIP_RGB do.
DRM_BRIDGE_CONNECTOR in turn selects DRM_DISPLAY_HDMI_STATE_HELPER,
which resolves the second symbol.
Fixes: 57d6811e8a ("drm/rockchip: rk3066_hdmi: switch to drm bridge")
Signed-off-by: Igor Paunovic <royalnet026@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260813144019.12089-3-royalnet026@gmail.com
dw_dp-rockchip.c calls drm_bridge_connector_init(), but ROCKCHIP_DW_DP
does not select DRM_BRIDGE_CONNECTOR. A configuration with
ROCKCHIP_DW_DP as the only enabled Rockchip output option fails to
link:
aarch64-linux-gnu-ld: drivers/gpu/drm/rockchip/dw_dp-rockchip.o: in function `dw_dp_rockchip_bind':
dw_dp-rockchip.c:(.text+0x1d4): undefined reference to `drm_bridge_connector_init'
Five other Rockchip encoder options that call
drm_bridge_connector_init() (ROCKCHIP_ANALOGIX_DP, ROCKCHIP_CDN_DP,
ROCKCHIP_DW_HDMI_QP, ROCKCHIP_LVDS, ROCKCHIP_RGB) already select it,
which masks the gap in any configuration that enables one of them.
ROCKCHIP_INNO_HDMI is covered through its DRM_INNO_HDMI core option.
The same change was posted by Marius Dinu in March and dropped when
the failure stopped reproducing in his build. The failure is
configuration-dependent - any other enabled option that selects
DRM_BRIDGE_CONNECTOR hides it - and it still reproduces on current
drm-misc-next with the configuration described above.
Select DRM_BRIDGE_CONNECTOR like the other users do.
Fixes: d68ba7bac9 ("drm/rockchip: Add RK3588 DPTX output support")
Link: https://lore.kernel.org/r/aneNCDU12OzG99UX@venus # ack to handle this apart from the dw-dp series
Link: https://lore.kernel.org/r/20260319155051.1944-1-m95d+git@psihoexpert.ro # earlier submission by Marius Dinu
Signed-off-by: Igor Paunovic <royalnet026@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260813144019.12089-2-royalnet026@gmail.com
rockchip_dp_drm_encoder_enable() uses sprintf() to format a device tree
path into a 32-byte stack buffer. Device tree paths are not limited to
this size, so a sufficiently long path can overflow the buffer.
Use snprintf() with the destination size to truncate the generated name
and keep the writes within bounds.
Fixes: 729f8eefdc ("drm/rockchip: analogix_dp: Add support for RK3588")
Cc: stable@vger.kernel.org
Signed-off-by: Yudi Yang <2000jedi@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260901195511.2761251-1-2000jedi@gmail.com
There's a large number of vm_get_page_prot(vma->vm_flags) invocations.
Make life easier by introducing vma_get_page_prot() parameterised by the
VMA.
This also makes converting vm_get_page_prot() to vma_flags_t easier.
Also update the userland VMA tests to reflect the change.
No functional change intended.
Link: https://lore.kernel.org/20260711-b4-vma-flags-mm-v2-8-0fa2357d5431@kernel.org
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Jani Nikula <jani.nikula@intel.com> # for i915
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> [DRM]
Reviewed-by: Vlastimil Babka (SUSE) <vbabka@kernel.org>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dave Airlie <airlied@gmail.com>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jann Horn <jannh@google.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pedro Falcato <pfalcato@suse.de>
Cc: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Callers of of_drm_find_panel() and drm_of_find_panel_or_bridge()
receive a pointer with no reference held, creating a window where
the panel device can be unregistered and freed between the lookup
and first use (e.g., drm_panel_prepare()).
Fix the lookup function by acquiring a reference with drm_panel_get()
before returning, under panel_lock. Callers are now responsible for
calling drm_panel_put() when they no longer need the pointer.
For bridge drivers that immediately wrap the panel in a panel_bridge
(which acquires its own reference), release the lookup reference right
after the bridge creation call.
For analogix-anx6345, which stores the panel for direct use, release
the reference in the i2c remove path.
For platform drivers using analogix_dp_core with a component lifecycle
(exynos_dp, rockchip analogix_dp), release the lookup reference in the
platform remove() function. The panel_bridge created during bind() holds
a separate reference that devm cleanup releases after remove() returns.
Also fix devm_drm_of_get_bridge() and drmm_of_get_bridge() in
bridge/panel.c itself, update a second batch of drivers calling
of_drm_find_panel() or drm_of_find_panel_or_bridge() to release the
lookup reference after wrapping the panel in a bridge, and handle the
cases where a panel is found but cannot be used, dropping the reference
immediately in those paths.
Assisted-by: Claude:claude-opus-4-6
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260717-drm_refcount_wiring-v3-3-023900c32e01@redhat.com
Simple KMS helper are deprecated since they only add an intermediate
layer between drivers and the atomic modesetting.
This patch removes the drm_simple_encoder_init() helper usage in the
rockchip drivers by open coding it and using the encoder atomic helpers
directly. This is a step to eventually get rid of this simple KMS helper,
once all drivers that use it have been converted.
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260704-rockchip-drm-simple-v5-1-a333f527a4f9@gmail.com
Replace the #include of <linux/mod_devicetable.h> by the more specific
<linux/device-id/*.h> where applicable. For most cases the include
can be dropped completely, only a few drivers need one or two headers
added.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://patch.msgid.link/1a3f2007c5c5dcf555c09a4035ce3ae8ef1b6c49.1782808461.git.u.kleine-koenig@baylibre.com
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-66-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-65-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge_funcs.atomic_reset callback and its
drm_atomic_helper_bridge_reset() helper are deprecated.
Switch to the atomic_create_state callback and its
drm_atomic_helper_bridge_create_state() counterpart.
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-64-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
With the introduction of the supported_formats member in the
dw-hdmi-qp platform data struct, drivers that have access to this
information should now set it.
Set it in the rockchip dw_hdmi_qp glue driver.
This allows this information to be passed down to the dw-hdmi-qp core,
which sets it in the bridge it creates, and consequently will allow the
common HDMI bridge code to act on it.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-17-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Switch between requested color formats by setting the right bus formats,
configuring the VO GRF registers, and setting the right output mode.
To do this, the encoder's atomic_check queries the bus format of the
first bridge, which was determined by the bridge chain recursive format
selection. Pick the input format if it's !FIXED, otherwise, pick the
output format.
The previously unused GRF register color format defines are redone as
well. Both RK3588 and RK3576 use the same defines; it didn't look like
this as there was a typo in the previously (unused) definition.
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-16-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
For RK3576 to be able to output YUV422 signals, it first needs to be
able to pick the right output mode in the display controller to do so.
The RK3576 hardware specifies different output formats depending on the
used display protocol.
Adjust the written register value based on the SoC and connector, so
other users of vcstate->output_mode don't have to care about this.
Reviewed-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-14-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
The Rockchip VOP2 video output driver has a "is_yuv_output" function,
which returns true when a given bus format is a YUV format, and false
otherwise.
This switch statement is lacking the bus format used for YUV422 10-bit.
Add the two component orderings of the YUV422 10-bit bus formats to the
switch statement.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-13-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Much like RK3588, RK3576 requires an RG swap to be performed for YUV444
8-bit and YUV444 10-bit bus formats.
Add its version to the already existing check for RK3588, so that YUV444
output is correct on this platform.
Fixes: 944757a4cb ("drm/rockchip: vop2: Add support for rk3576")
Reviewed-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-12-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
The Rockchip display controller has a general YUV422 output mode, and
some SoC-specific connector-specific output modes for RK3576.
Add them, based on the values in downstream and the TRM (dsp_out_mode in
RK3576 TRM Part 2, register POST*_CTRL_POST_DSP_CTRL).
Reviewed-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-11-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
rockchip_drm_sys_resume()/drm_mode_config_helper_resume() is called
before the resume pm ops of dw-hdmi. This result in an atomic_enable()
before dw_hdmi_rockchip_resume()/dw_hdmi_resume() is called.
Resume (without changes):
- rockchip_drm_sys_resume()
- drm_mode_config_helper_resume()
- atomic_enable()
- dw_hdmi_rockchip_resume()
- dw_hdmi_resume()
- dw_hdmi_init_hw()
Change to use resume_early pm ops for system suspend to ensure pm ops
for dw-hdmi is run before rockchip-drm pm ops. Also fix a possible NULL
pointer dereference timing issue while at it.
Resume (with changes):
- dw_hdmi_rockchip_resume_early()
- dw_hdmi_resume()
- dw_hdmi_init_hw()
- rockchip_drm_sys_resume()
- drm_mode_config_helper_resume()
- atomic_enable()
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-12-jonas@kwiboo.se
The HDMI block is currently hardcoded to expect RGB output from the
display controller. However, the VOP in some SoCs are capable of YCbCr
output to the HDMI block.
Read the negotiated bus format from the bridge state and propagate it to
the CRCT state in form of output mode and bus format. Treat the format
MEDIA_BUS_FMT_FIXED as RGB888 and reject any unsupported formats.
This has no inpact until dw-hdmi bridge is fully converted to a HDMI
bridge and also adds support for the "color format" connector property.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-11-jonas@kwiboo.se
The HDMI helpers negotiated TMDS character rate and output bpc are
available from the connector state. Change the encoder helper from
mode_set() to atomic_mode_set() so these values can be used to configure
the HDMI PHY using phy_configure().
This has no impact until the dw-hdmi bridge is fully converted into a
HDMI bridge and HDMI helpers are used to assign hdmi.tmds_char_rate.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-10-jonas@kwiboo.se
All in-tree RK3568/RK3566 device trees using HDMI also include the
required hdmi-connector node at port@1 since their introduction.
Define the output_port for RK3568 so that dw-hdmi bridge driver can pick
up the display-connector bridge once the dw-hdmi connector is replaced
with a bridge connector in a future change.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-9-jonas@kwiboo.se
Move the blank line before the RK3328 definitions for readability and
make the phy_config table spacing consistent with other tables.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-8-jonas@kwiboo.se
Remove the empty disable() and static return true mode_fixup() encoder
helper funcs as they do not provide any useful functionality.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-7-jonas@kwiboo.se
Take a reference on the dw-hdmi bridge during bind and drop it again
from unbind to ensure the bridge is kept alive for the lifetime of the
encoder component.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-6-jonas@kwiboo.se
Inline rockchip_hdmi_parse_dt() into dw_hdmi_rockchip_bind() so the
probe path is easier to follow in one place. Also ensure failures in
bind() use dev_err_probe() so probe deferrals and errors are reported
consistently.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-5-jonas@kwiboo.se
Change to use drmres helpers drmm_kzalloc() to allocate driver data
and drmm_encoder_init() to initialize the encoder. With use of drmres
the manual encoder cleanup in failure path and unbind is also removed.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-4-jonas@kwiboo.se
Replace indirect struct device accesses via hdmi->dev and pdev->dev with
the local dev parameter already available in dw_hdmi_rockchip_bind(),
for consistency and readability.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-3-jonas@kwiboo.se
Change to use of_device_get_match_data() to get match data prior to
allocating private data. All current entries in the of_device_id match
table provide match data, so no functional change is intended.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3328
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260518193748.2482823-2-jonas@kwiboo.se
RK3576 integrates Analogix eDP 1.3 TX and Samsung combo PHY
hardware blocks that fully match the proven RK3588 design.
Add dedicated chip data table and device tree matching entry
to bring up basic eDP functionality for the RK3576 platform.
Support is limited to RGB output up to 4K@60Hz for now; audio,
PSR and other advanced eDP 1.3 features remain unvalidated.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-12-damon.ding@rock-chips.com
Acquire and enable the HCLK_VO1 bus clock explicitly for RK3588
eDP controller to guarantee register and datapath access.
The clock was previously enabled implicitly via rockchip,vo-grf
phandle reference, which relies on side effect and is fragile.
Fetch optional "hclk" clock in driver to align with updated device
tree binding and keep consistent with hardware clock dependency.
Fixes: 729f8eefdc ("drm/rockchip: analogix_dp: Add support for RK3588")
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601065100.1103873-6-damon.ding@rock-chips.com
After the old_layer_sel local was removed, the only caller of
rk3568_vop2_wait_for_layer_cfg_done() already passes vop2->old_layer_sel
as the expected value.
Drop the redundant parameter and read the member directly inside the
function.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-5-730226a7331e@collabora.com
The layer_sel and atv_layer_sel local variables in
rk3568_vop2_setup_layer_mixer() are unconditionally assigned from
vop2->old_layer_sel and the RK3568_OVL_LAYER_SEL register read,
respectively, before any use.
Remove the superfluous zero-initializers.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-4-730226a7331e@collabora.com
The old_layer_sel and old_port_sel local variables were introduced to
hold the previous VP configuration for comparisons and wait targets,
working around the premature update of vop2->old_layer_sel and
vop2->old_port_sel earlier in the function.
Remove these superfluous locals and instead defer the assignments of
vop2->old_layer_sel and vop2->old_port_sel to just before the
corresponding shadow register writes, where the transition from old to
new logically belongs.
No functional change intended.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-3-730226a7331e@collabora.com
LAYERSEL_REGDONE_SEL mask of RK3568_OVL_CTRL register controls which
Video Port (VP) vsync latches the shared RK3568_OVL_{LAYER|PORT}_SEL
shadow registers into the active configuration.
rk3568_vop2_setup_layer_mixer() overwrites LAYERSEL_REGDONE_SEL to the
current VP ID before waiting for the previous VP layer configuration to
take effect. As a consequence, the previous VP vsync can no longer
trigger the latch, so the wait polls a value that might never appear.
Move the layer cfg done wait before the RK3568_OVL_CTRL write so the
previous VP vsync can still commit the pending configuration.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-2-730226a7331e@collabora.com
rk3568_vop2_setup_layer_mixer() waits for the previous Video Port (VP)
layer configuration to take effect before writing a new one to the
shared RK3568_OVL_LAYER_SEL shadow register. However, it passes
vop2->old_layer_sel to rk3568_vop2_wait_for_layer_cfg_done() as the
expected value, which at that point already contains the new VP layer.
This causes the wait to poll for a value that has not been written to
the shadow register yet, resulting in spurious timeouts when two
non-blocking atomic commits race:
rockchip-drm display-subsystem: [drm] *ERROR* wait layer cfg done timeout [...]
Pass the local old_layer_sel instead, which still holds the value
captured from vop2->old_layer_sel before it was overwritten, i.e. the
previous VP target that the hardware is expected to latch.
Fixes: 3e89a8c683 ("drm/rockchip: vop2: Fix the update of LAYER/PORT select registers when there are multi display output on rk3588/rk3568")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260504-vop2-layer-cfg-tmout-v1-1-730226a7331e@collabora.com
The VOP2 background color must be programmed with 10-bit precision,
using YUV format when the overlay operates in YUV mode, and RGB
otherwise.
Add the required RGB-to-YCbCr conversion logic, covering all color
spaces supported by the display controller: BT601L, BT601F, BT709L and
BT2020L.
Since the color is currently programmed to hardware on every atomic
commit, minimize the computation cost by splitting the work across the
two paths: in atomic_enable(), perform the conversion unconditionally
(the hardware state is unknown after power-on), while in atomic_flush(),
perform it only when the DRM property has actually changed.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601-vop2-bg-yuv-v2-2-e5aef1d16fec@collabora.com
Rename CSC_BT2020 to CSC_BT2020L for consistency with the other
limited-range enum members (CSC_BT601L, CSC_BT709L) and to distinguish
it from a potential future full-range BT.2020 variant.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Andy Yan <andyshrk@163.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601-vop2-bg-yuv-v2-1-e5aef1d16fec@collabora.com
The dw_hdmi-rockchip driver validates pixel clock rates against the
HDMI PHY's internal clock provider on certain SoCs like RK3328.
This is currently achieved by dereferencing hdmi->phy->dev.of_node
to obtain the provider node, which violates the Generic PHY API's
encapsulation (the goal is for struct phy to be an opaque pointer
with a hidden definition, to be interacted with only using API
functions or NULL pointer checks, for the case where optional variants
of phy_get() did not find a PHY).
Refactor dw_hdmi_rockchip_bind() to perform a manual phandle lookup
on the "hdmi" PHY index within the controller's DT node. This provides
a parallel path to the clock provider's OF node without relying on the
internal structure of the struct phy handle.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260505100523.1922388-16-vladimir.oltean@nxp.com
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
-----BEGIN PGP SIGNATURE-----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=T0tH
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2026-04-20' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v7.1-rc1:
UAPI Changes:
- Expose per-client BO memory usage via fdinfo in amdxdna. (Hou)
- Change the default priority of drm scheduler to fair. (Tvrtko)
Cross-subsystem Changes:
- Revert hugetlb support in udmabuf. (Gunthorpe)
- Fix error in udmabuf with CONFIG_DMA_API_DEBUG(/ _SG). (Gavrilov)
- Add Docbook for DRM_IOCTL_SYNCOBJ_EVENTFD, (Ser)
clarify drm_bridge_get/put. (Tvrtko)
- Change signature of drm_connector_attach_hdr_output_metadata_property. (Canal)
- Use IOVA allocations in gpusvm and pagemap APIs. (Brost)
- Fix tracepoints vs dma-fence lifetime. (Tvrtko)
- Convert st-dma*.c tests to use kunit. (Gunthorpe)
Core Changes:
- Deduplicate counter and timestamp retrieval in vblank code. (Ville)
- Parse AMD VSDB v3 in CTA extension blocks, and use it in amdgpu. (Chen)
- Prevent bridge and encoder chain changes at inopportune times. (Ceresoli)
- Map the run queue 1:1 to the drm scheduler. (Tvrtko)
Driver Changes:
- Assorted bugfixes and (documentation) updates to rockchip, bridge/synopsis,
panfrost, tidss, accel/qaic, tilcdc, vc4, ast, imagination, panthor,
renesas, accel/amdxdna, msxfb, bridge/imx8mp, nouveau.
bridge/analogix_dp, bridge/exynos_dp, omap.
- Add support for CSW PNB601LS1-2, LGD LP116WHA-SPB1, panels.
- Add support for a lot of waveshare panels (Baryshkov)
- Support for AIE4 devices in accel/wamdxdna. (Zhang)
- Enable support for GEM shrinking in panthor. (Goel/Brezillon)
- Runtime Power Management is added to v3d. (Canal)
- Allow panel probing and use the panel bridge helper in analogix_dp. (Ding)
- Support XRGB1555 and C8 in mgag and XRGB1555 in ast. (Zimmermann)
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/bf31b1a1-951b-4f60-b226-22e8c083697d@linux.intel.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
The KMS framework uses two slightly different definitions for the state
concept. For a given object (plane, CRTC, encoder, etc., so
drm_$OBJECT_state), the state is the entire state of that object.
However, at the device level, drm_atomic_state refers to a state update
for a limited number of objects.
Thus, drm_atomic_state isn't the entire device state, but only the full
state of some objects in that device. This has been an endless source of
confusion and thus bugs.
We can rename the drm_atomic_state structure to drm_atomic_commit to
make it less confusing.
This patch was created using:
rg -l drm_atomic_state | \
xargs sed -i 's/drm_atomic_state/drm_atomic_commit/g; s/drm_atomic_commit_helper/drm_atomic_state_helper/g'
mv drivers/gpu/drm/tests/drm_atomic_state_test.c drivers/gpu/drm/tests/drm_atomic_commit_test.c
Acked-by: Simona Vetter <simona.vetter@ffwll.ch>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patch.msgid.link/20260427-drm-drm-atomic-update-v4-1-c0e713bfdf25@kernel.org
