Update the register definition for GRBM_SOFT_RESET
to match what was in the old radeon driver and use
these bits in the soft reset implementation.
For the soft reset, use basically the same
implementation as GFX7-8, the main difference being
the GRBM_SOFT_RESET bit fields and the fact that
GFX6 doesn't have MQD/HQD. Reset every block using
the GRBM, then proceed to reset the GRBM and SEM blocks
using the SRBM.
The soft reset also calls the clock and powergating
functions of the IP block. This is necessary for
correct operation, otherwise the GPU might fall
off the PCIe bus.
Add a gfx_v6_0_late_init() function for consistency
with other GPU generations. This function will
later serve the same purpose as it does on GFX7+
when we get around to enable more IRQs on GFX6.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
since gfx 9.4.3 HW is calculating accumulated activity counter
per-queue in register sdmax_rlcx_utilization_hi/lo, CPFW adds it in
sdma MQD for save/restore, KFD will read it from there. gfx 9.4.2
will still keep the way to read from memory at rptr+8.
v2: read dynamic counter directly from utilization register
v3: add CPFW supported version check (Harish)
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New offset and sh/mask are added for vpe v2.0.0
Acked-by: Roy Chan <Roy.Chan@amd.com>
Signed-off-by: Caden Chien <chih-wei.chien@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required FRL registers for DCN316.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required FRL registers for DCN315.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add all the required registers to support FRL on DCN303.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required FRL registers for DCN302.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add all the required registers to support FRL on DCN314.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit add the basic set of FRL registers associated with DCN32.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the required DCN3.2.1 registers to enable FRL in this ASIC.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit introduces multiple hardware registers necessary to enable
FRL on AMD devices.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Introduce the stream creation function, which requires the FRL
registers for DCN30.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add header files for nbio v6_3_2 register offsets
and shift masks
v2: Update nbio v6_3_2 ip headers up to CL7337280
v3: Update nbio v6_3_2 ip headers up to CL7749557
v4: Clean up registers (Alex)
v5: squash in updates (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add header files for gc v12_1_1 register offsets
and shift masks
v2: Update gc v12_1_1 ip headers
v3: Update gc v12_1_1 ip headers
Signed-off-by: Bing Ma <Bing.Ma@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DCN42 underflow detection functions in dcn42_optc.c use
OPTC_RSMU_UNDERFLOW register but the register offset definitions
were missing from dcn_4_2_0_offset.h and dcn42_resource.h.
[How]
Add missing register definitions.
Fixes: e56e3cff2a ("drm/amd/display: Sync dcn42 with DC 3.2.373")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch provides a bulk merge to align driver
support for DCN42 with Display Core version 3.2.373.
It includes upgrade for:
- clk_mgr
- dml2/dml21
- optc
- hubp
- mpc
- optc
- hwseq
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DCN 4.2 clock manager.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The reason the RAP is not granting access to 0x58200 is that
a dedicated RSMU slot would have to be spent for this address range,
and MPASP is close to running out of RSMU slots.
This will help to fix PSP TOC load failure during secureboot.
GFX Driver Need to use indirect access for SMN address regs.
Signed-off-by: sguttula <suresh.guttula@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register headers for the following IPs:
- DCN 4.2.0
- DPCS 4.0.0
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
v2: Added SPI bits to sh_mask header
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Implement Gfx v12.1 VFi interface under SRIOV
- Redirect all RLCG interface access to new function after
Gfx v12.1
v2: squash in register updates
Signed-off-by: Bokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add header files for osssys v7_1_0 register offsets
and shift masks
v2: Update osssys v7_1_0 ip headers to the latest version
v3: Clean up registers (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sid.h header contained some VCE1 register definitions, but
they were using byte offsets (probably copied from the old radeon
driver). Move all of these to the proper VCE1 headers and ensure
they are in dword offsets.
Also add the register definitions that we need for the
firmware validation mechanism in VCE1.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Co-developed-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some HDCP related register headers for future use.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vcn v5_0_0 register offset and shift masks
header files
Only include the registers required for MMSCH
initialization
Signed-off-by: fanhuang <FangSheng.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used later when switching away from sid.h/si_enums.h.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move and rename DMA_SEM_INCOMPLETE_TIMER_CNTL and DMA_SEM_WAIT_FAIL_TIMER_CNTL
in oss_1_0_d.h
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used later when switching away from sid.h/si_enums.h.
v2: fix whitespace (Alex)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
They will be used later when switching away from sid.h/si_enums.h.
v2: fix up whitespace (Alex)
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
By replacing VGA_VSTATUS_CNTL by VGA_RENDER_CONTROL__VGA_VSTATUS_CNTL_MASK,
we also need to fix its usage in GMC6.
Note: VGA_VSTATUS_CNTL's binary value was inverted in dce_6_0_sh_mask.h,
so we need to invert its value where it was used.
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for more per-process flags starting with option to configure
MFMA precision for gfx 9.5
v2: Change flag name to KFD_PROC_FLAG_MFMA_HIGH_PRECISION
Remove unused else condition
v3: Bump the KFD API version
v4: Missed SH_MEM_CONFIG__PRECISION_MODE__SHIFT define. Added it.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds register needed for debugging purposes.
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add core reset control registers for JPEG4_0_3
Signed-off-by: Sathishkumar S <sathishkumar.sundararaju@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA writes has to probe invalidate RW lines. Set snoop bit in mmhub for
this to happen.
v2: Missed a few mmhub_v9_4. Added now.
v3: Calculate hub offset once since it doesn't change inside the loop
Modified function names based on review comments.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add register headers for DCN36.
V2: adjust copyright license text
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
