Combine two related color manager improvements:
1. Migrate MCM/RMCM, shaper and 3DLUT HW programming to dc_plane_cm
- Continue convergence with upstream Color Manager refactor
- Migrate MCM/RMCM, shaper and 3DLUT programming for dcn401+ to dc_plane_cm
- Unify MCM programming across both legacy and 3DLUT DMA paths
- Add 3DLUT DMA broadcast support for multi-pipe planes
2. Reprogram MCM blend LUT on blend_enable falling edge
- Fix issue where SDR desktop remained desaturated after video playback
- Detect blend_enable falling edge (1->0) in surface update detection
- Force MCM LUT reprogramming on blend state change
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
ensure dtbclk is enabled before hdmistreamclk_en
pmfw could stop dtbclk on idle.
driver needs to ensure dtbclk enabled is enabled before hdmistreamclk_en
also disable debounce timer on dcn42.
Reviewed-by: Chris Park <chris.park@amd.com>
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Roman Li <roman.li@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Add hooks in various entry points to perform hw/sw init for DCN6 asic
- Add dependent changes needed to enable DCN6 asic
- Update the Makefiles so that DCN6 related newly added sources are compiled
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN must not gate DF C-state locally via the DCHUBBUB ALLOW_SELF_REFRESH
controls: forcing a local "disallow" during MM-stutter re-entry can wedge the
fabric and hang boot. When DCN is disallowing c-state or has invalid watermarks
we should be explicit about it rather than using the watermark force selector.
[How]
Register DCN as a client of PMFW's DF C-state arbiter and signal over DALSMC
whether DCN permits DF C-state; PMFW allows DF C-state only once every client
(including DCN) has voted "allow".
- dc_clocks.cstate_allow: last DCN vote acked by PMFW
- clk_mgr_funcs::notify_cstate_disable(clk_mgr, disable)
prepare_bandwidth and headless dc_power_down_on_boot vote Allow;
hardware_release votes Disallow; init_clocks
(D0 entry) only clears the cache (cstate_allow) so the next allow re-syncs with
PMFW.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The dc_update_state commit interface and the dc_probe object model existed
but were not connected: there was no path to validate, commit, and program
a probe through the update pipeline, nor to read the result back. The
measurement waits on OTG frame edges and must not block fast updates.
[How]
- Move the per-commit scratch off dc_stream_state onto a dc-owned pool;
acquire at init, release on cleanup or prepare failure, serialized by the
DM global lock every commit path already holds.
- dc_update_state drives stream commits, probe-only commits, or both through
one staged init/prepare/execute/cleanup loop with a null-arg guard. prepare
releases the scratch slot on failure; cleanup releases it on success.
- Probe prepare installs the absolute probe set in place; execute calls the
perfmon programming hook in the unlocked window and latches results.
- Add resource_validate_probe_set, a context-free achievability check shared
by dc_validate_global_state (full update) and probe prepare (probe-only).
- dc_state_get_status gains a probe status class with a probe filter and a
by-type mapping; dc_validation_set gains probes/probe_count. Drop the dead
actual_* fields from struct dc_qos_info.
Reviewed-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The hubbub perfmon peak-bandwidth path used a monolithic function
combining counter configuration and enable in one call, and wrote results
into a caller-supplied struct outside the dc_state model. A BLS-driven
approach builds the measurement from stateless primitives, gates it to OTG
frame boundaries, and stores results in dc_state.
[How]
- Rename the peak-BW vtable members from "unbounded_bandwidth" to
"out_of_order_bandwidth" and split them into arm and start operations.
- Add the full set of perfmon BLS primitives - param structs, union
members, enum entries, executors, and hwss_add_* builders - for reset,
arm, every start_measuring_* and every get_* operation.
- Add dc_probe_status (valid, type, result union) plus probe_status[] to
dc_state.
- Replace the measure_memory_qos hook with program_perfmon(dc, context),
which writes results into probe_status[].
- dc_get_qos_info no longer calls the removed hook.
Reviewed-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
dc_validate_with_context() took a C array of per-stream elements plus a
separate count. This flat array cannot be extended to carry global objects
without widening the signature further.
[How]
Rename the per-stream element to dc_validation_stream, and make
dc_validation_set a root struct holding streams[MAX_STREAMS] and
stream_count. Update dc_validate_with_context() to take a single
const dc_validation_set * and propagate the new shape through all DC-layer
callers and helpers. Remove the never-implemented
dce112_validate_with_context declaration and the orphaned dce100
forward-declare.
No behavior change.
Reviewed-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Performance measurement needs to commit through the same update entry
point as planes and streams, with DM working against an abstraction of
what to measure rather than the hardware block that performs it.
[How]
Add dc_probe.h defining dc_probe_type (the measurable quantity),
dc_probe_target_state (not measuring / measuring / measured),
dc_probe_scope (global only, per-stream/plane deferred), and
dc_probe_state (an inline descriptor with copy semantics, no refcount).
dc_state carries the committed set as probes[MAX_PROBES] plus
probe_count. dc_state_update carries dc_probe_updates as the desired
absolute set that DC diffs against the committed set.
Reviewed-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Ongoing optimization efforts require splitting DPMS ON around
enable_link, in order to enable running multiple sequences
in parallel.
[How]
* Split link_set_dpms_on across enable_link
* Add return value indicating whether the programming sequence
succeeded and/or run to the end.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dominik Kaszewski <dominik.kaszewski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
DCN4+ use a new structure for MCIF arbiter registers.
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable OLED panels to save more power on the Linux platform by
enabling CACP support on Linux.
[How]
Update abm_feature_support() to return ABM_CACP_SUPPORT for OLED
panels. Enable ABM property for all eDP panels including OLED to
support CACP via set_abm_level.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Bandwidth clock programming build and execution phases were coupled,
preventing the HWSS from orchestrating them through block sequencing.
[how]
Separate clock programming into build and execute phases across
latest versions. Build phase populates the clk_mgr internal block
sequence array, then registers a single CLK_MGR_UPDATE_CLOCKS HWSS step.
Execute phase dispatches the pre-built sequence. Add HWSS operations for
clk_mgr_set_max_memclk, hubbub_program_watermarks, hubbub_program_arbiter,
and hubbub_program_compbuf_segments.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The compound condition checking dp_connector_no_native_i2c
and no_ddc_pin was duplicated across many files, obscuring
intent at every call site.
[How]
Add bool force_i2c_over_aux to struct dc_link, initialized
once during link creation. Add link_get_ddc_aux_inst()
helper to select the correct aux instance. Wire into
link_service via construct_link_service_ddc(). Replace all
duplicated condition checks and aux instance selection
blocks with the new field and helper. No functional change.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
There is an updated workaround for PG Repeater issue in DCN42. This PR is
addressing the dynamic power gating use cases (Driver PG) to align with
the new sequence.
Reviewed-by: Ovidiu (Ovi) Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Begin convergence with upstream Color Manager refactor
(fda768acb2a1 "drm/amd/display: Sync dcn42 with DC 3.2.373") by
consolidating fragmented per-plane CM state (shaper, 3DLUT, blend,
CM2) into a single dc_plane_cm structure shared by dc_plane_state
and dc_surface_update. Legacy fields are gated behind TRIM_CM2 so
that it keeps compatibility with other repositories.
[How]
Refactored to use newer structures.
No functional behavior change intended. Under !TRIM_CM2 the legacy
fields are still populated for compatibility with other repositories.
v2: squash in conflicting types fix
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Rafal Ostrowski <rafal.ostrowski@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The QoS model is now populated directly in clock manager
from firmware data. The translator function pointer is no
longer needed.
[How]
- Remove get_utm_qos_model function pointer from
soc_and_ip_translator_funcs
- Remove associated forward declarations from
soc_and_ip_translator.h
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add support for passing QoS model data from clock manager
to bandwidth calculation consumers.
[How]
- Add forward declaration and const pointer for utm_qos_model
in clk_bw_params
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
For future use in migrating the idle optimizations message to PMFW to
DC core.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The DMUB register offload feature should no longer be used.
This was originally a debug feature for DCN21.
No longer applicable to the DMUB programming model.
[How]
Remove DMUB register offload infrastructure including helper
functions, structures, debug options, and register sequence macros.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add all the bits to enable DSC over FRL.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch adds all relevant includes in DC that are
used by the HDMI FRL implementation in DC.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add DCN42B code to DC
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Matthew Stewart <Matthew.Stewart2@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Add GPU-accessible DRAM buffer fields for bulk data
transfer from PMFW during clock manager initialization.
[How]
Add dal_init_table and dal_init_table_addr fields to
struct clk_mgr_internal for TABLE_DAL_INIT DRAM transfer.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
DCN4x ASICs have different DCCG logic for programming DP DTO. The current
get_pixel_clk_frequency_100hz() function does not account for this.
Rename the function to "get_dp_dto_frequency" to more accurately
reflect its intended behaviour. Create a new function that correctly
calculates the target pixel rate for DCN4.x DCCG design and use it.
Reviewed-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was not used by anything anymore.
Note that the parts of DC that need this information actually
already query it from the pplib and don't use the hardcoded
information from max_clks_by_state.
v2:
- Also delete state_dependent_clocks
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These fields are not used by anything anymore.
v2:
- Delete dm_pp_get_static_clocks()
- Delete pp_to_dc_powerlevel_state()
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In cases where there are two FULL updates within the same display frame,
it's possible for some blocks to be programmed a second time without having
been latched completely from the first programming.
DCN 3.5 and up already work around this with additional validation checks
for frame count and defer as needed via fsleep.
[how]
Enabled existing pipe checks generically for all DCN versions to avoid HW
programming hazards.
Also removed redundant max_frame_count which can be determined by the
register mask and shift.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Aric Cyr <Aric.Cyr@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix various warnings related to unsigned/signed mismatches
- Consistently use the same signedness for a given value
- Explcitly cast between types when needed
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
The QoS reporting interface lacked a field to expose the maximum
active memory bandwidth budget. Adding this field allows callers to
observe the effective bandwidth ceiling.
[How]
Rename struct memory_qos to dc_measured_memory_qos and introduce
a new struct dc_requested_memory_qos holding bandwidth lower bound,
calculated average bandwidth, latency upper bounds, and max bandwidth
budget. Add a get_requested_memory_qos function pointer to
clk_mgr_funcs. Update dc_get_qos_info to call through the new
function pointer and populate all requested QoS fields including
qos_max_bw_budget_in_mbps in dc_qos_info.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add override_memory_bandwidth_request to clk_mgr_funcs and get_utm_qos_model callback
to soc_and_ip_translator_funcs for future test use.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
While smart power oled is enabled,
the infopacket contents are tied to the frame histogram,
so it does not need driver side to update the hdr metadata.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY & HOW]
The original refactor and fixes are causing regressions.
Revert them for now until they can be resolved
Fixes: e56e3cff2a ("drm/amd/display: Sync dcn42 with DC 3.2.373")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Dillon Varone <Dillon.Varone@amd.com>
Signed-off-by: James Lin <pinglei.lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
to make hubp surface_flip_registers field define mismatch
with dc_plane_address
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rename the enum 'pixel_format' to 'dc_pixel_format' to avoid potential
name conflicts with the pixel_format struct defined in
include/video/pixel_format.h.
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Post-driver cases always use linear tiling yet gfx handling for this
case is improper, allowing for incorrect gfx structs to be populated and
used.
[How]
Query DC for the apporpriate linear tiling mode and populate the DCN
specific gfx version structs.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Nicholas Carbones <Nicholas.Carbones@amd.com>
Signed-off-by: Chuanyu Tseng <chuanyu.tseng@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch provides a bulk merge to align driver
support for DCN42 with Display Core version 3.2.373.
It includes upgrade for:
- clk_mgr
- dml2/dml21
- optc
- hubp
- mpc
- optc
- hwseq
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DCN 4.2 clock manager.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why & how]
Add the missing dprefclk and dtbclk clock types to the enum.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Ovidiu Bunea <ovidiu.bunea@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for DCN 4.2 in Display Core
Signed-off-by: Roman Li <Roman.Li@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It turned out that these were actually not necessary.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ensure that the DAC output is enabled at the correct time by
moving it to the DCE link encoder similarly to how digital
outputs are enabled.
This also removes the call to DAC1EncoderControl from the DCE
HWSS, which always felt like it was a hacky solution.
Fixes: 0fbe321a93 ("drm/amd/display: Implement DCE analog link encoders (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Tested-by: Mauro Rossi <issor.oruam@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Direct DCCG register access in hwseq layer was creating register conflicts.
[How]
Migrated DCCG registers from hwseq-dccg component.
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <BhuvanaChandra.Pinninti@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
This reverts commit 949adb4789, which
causes regressions related to HDCP when resuming from S3.
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN 3.6+ hardware supports CRC-32 polynomial in addition to the
legacy CRC-16. Enable 32-bit CRC values per color component for
improvement of precision in display validation.
[How]
When userspace sets crc_poly_mode (0=CRC-16, 1=CRC-32) via the debugfs
interface, the value is stored in dm_irq_params.crc_poly_mode. When CRC
source configuration triggers amdgpu_dm_crtc_configure_crc_source(),
crc_poly_mode is retrieved from dm_irq_params and passed to
dc_stream_configure_crc().
In the DC layer, dc_stream_configure_crc() sets crc_poly_mode into the
crc_params structure and passes it to optc35_configure_crc(). If the
hardware supports the OTG_CRC_POLY_SEL register, the register is
programmed to select CRC-16 or CRC-32 polynomial.
When reading CRC values, optc35_get_crc() checks whether CRC32 register
masks are available. If present, it reads 32-bit CRC values from
OTG_CRC0/1_DATA_R32/G32/B32 registers; otherwise, it falls back
to reading 16-bit CRC values from legacy OTG_CRC0/1_DATA_RG/B
registers.
Reviewed-by: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Direct DIO registers access in hwseq layer was creating register conflicts.
[how]
Migrated DIO registers from hwseq to dio component.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Direct DCCG register access in hwseq layer was creating register conflicts.
[how]
Migrated DCCG registers from hwseq to dccg component.
Reviewed-by: Martin Leung <martin.leung@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[how]
- Consolidate memory QoS measurement functions into a single interface for
better maintainability and usability.
- Update function naming for improved clarity.
- Unify latency measurements into a single function call with update
programming sequence.
- Add `start_measuring_urgent_assertion_count` and
`get_urgent_assertion_count` interfaces.
- Add `start_measuring_prefetch_data_size` and `get_prefetch_data_size`
interfaces.
- Update start_measuring_unbounded_bandwidth implementation to measure 200
data returns in the middle of prefetch window.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Prepare for supporting panel replay on external monitors.
Reviewed-by: Robin Chen <robin.chen@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Peichen Huang <PeiChen.Huang@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Add the ability to enable/disable global fine grain clock gating within DCCG.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Leo Chen <leo.chen@amd.com>
Signed-off-by: Matthew Stewart <matthew.stewart2@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
