Correct spaces or mix of tabs+spaces into proper tab-indented lines.
No functional impact (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Neither Linux drivers nor DT bindings ever described or used clock-names
and reset-names for this SoC. The binding allows clock-names only for
atmel,at91sam9g45-ehci and atmel,at91rm9200-ohci, but not for HiSilicon.
reset-names were never allowed.
Drop them from DTS to fix dtbs_check warnings:
hi3798cv200-poplar.dtb: usb@9880000 (generic-ohci): False schema does not allow ['bus', 'clk12', 'clk48']
hi3798cv200-poplar.dtb: usb@9880000 (generic-ohci): Unevaluated properties are not allowed ('reset-names' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The rt1711h Type-C controller on the HiKey960 has the USB role-switch
endpoint placed as a top-level 'port' node, outside the connector
subnode. This triggers two dtbs_check warnings against
richtek,rt1711h.yaml:
- 'port' does not match any of the regexes: '^pinctrl-[0-9]+$'
- connector:ports: 'port@0' is a required property
Move the role-switch endpoint into the connector's port@0, which is
where usb-connector.yaml expects it. Update the DWC3 remote-endpoint
phandle accordingly.
The TCPM core (tcpm.c) looks up the role switch starting from the
connector fwnode via fwnode_usb_role_switch_get(). With the endpoint
inside the connector's port@0, it is found through the primary lookup
path rather than the device-level fallback.
Cross-compiled for arm64. Verified with dt_binding_check and
dtbs_check. Not runtime-tested on hardware.
Signed-off-by: Akash Sukhavasi <akash.sukhavasi@gmail.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs,
and two older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and IOT
(QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53 cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores, with
additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using low-end
Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M
or i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last
board specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip
-----BEGIN PGP SIGNATURE-----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=5Dwm
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"A number of SoC platforms are adding modernized variants of their
already supported chips time, with a total of 12 new SoCs, and two
older SoC getting removed:
- Qualcomm Glymur is a compute SoC using 18 Oryon-2 CPU cores
- Qualcomm Mahua is a variant of Glymur with only 12 CPU cores, but
largely identical.
- Qualcomm Eliza is an embeded platform for mobile phone (SM7750) and
IOT (QC7790S/M) workloads
- Qualcomm IPQ5210 is a wireless networking SoC using Cortex-A53
cores
- Qualcomm apq8084 and ipq806x had only rudimentary support but no
actual products using them, so they are now gone.
- Axis ARTPEC-9 is a follow-up to the ARTPEC-8 embedded SoC, using
the Samsung SoC platform but now with Cortex-A55 cores
- ARM Zena is a virtual platform in FVP using Cortex-A720AE cores,
with additional versions planned to be merged in the future.
- ARM corstone-1000-a320 is a reference platform for IOT, using
low-end Cortex-A320 cores
- Microchip LAN9691 is an updated 64-bit variant of the arm32 lan966x
series of networking SoCs
- Microchip PIC64GX is an embedded RISC-V chip using SIFIVE U54 CPU
cores
- Rockchip RV1103B is the low-end 32-bit single-core vision processor
- Renesas RZ/G3L (r9a08g046) is an industrial embedded chip using
Cortex-A55 cores, similar to the G3E and G3S variants we already
supported.
- NXP S32N79 is an automotive SoC using Cortex-A78AE cores, a
significant upgrade from the older S32V and S32G series
These all come with at least one reference board or an initial product
using these, in total there are 67 newly added boards. The ones for
already supported SoCs are:
- Two more Aspeed BMC based boards
- Three older tablets based on 32-bit OMAP4 and Exynos5 SoCs
- One Set-top-box based on Allwinner H6
- 22 additional industrial/embedded boards using 64-bit NXP i.MX8M or
i.MX9 SoCs
- 20 Qualcomm SoC based machines across all possible markets:
workstation, gaming, laptop, phone, networking, reference, ...
- Three more Rockchips rk35xx based boards
- Four variants of the Toradex Verdin using TI AM62
Other notable bits are:
- A cleanup for the 32-bit Tegra paz00 board moved the last board
specific code on Tegra into equivalent dts syntax.
- There continues to be a significant number of fixes for static
checking of dtc syntax, but it feels like this is slowing down,
hopefully getting into a state where most known issues are
addressed
- Additional hardware support for many existing boards across SoC
families, notably Qualcomm, Broadcom, i.MX2, i.MX6, Rockchips,
STM32, Mediatek, Tegra, TI and Microchip"
* tag 'soc-dt-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (841 commits)
arm64: dts: ti: k3: Use memory-region-names for r5f
ARM: dts: imx: Add DT overlays for DH i.MX6 DHCOM SoM and boards
ARM: dts: imx6sx: remove fallback compatible string fsl,imx28-lcdif
ARM: dts: imx25: rename node name tcq to touchscreen
ARM: dts: imx: b850v3: Disable unused usdhc4
ARM: dts: imx: b850v3: Define GPIO line names
ARM: dts: imx: b850v3: Use alphabetical sorting
ARM: dts: imx: bx50v3: Configure phy-mode to eliminate a warning
ARM: dts: imx: bx50v3: Configure switch PHY max-speed to 100Mbps
ARM: dts: imx7ulp: Add CPU clock and OPP table support
ARM: dts: imx7-mba7: Deassert BOOT_EN after boot
ARM: dts: tqma7: add boot phase properties
ARM: dts: imx7s: add boot phase properties
ARM: dts: tqma6ul[l]: correct spelling of TQ-Systems
ARM: dts: mba6ulx: add boot phase properties
ARM: dts: imx6ul[l]-tqma6ul[l]: add boot phase properties
ARM: dts: imx6ul/imx6ull: add boot phase properties
ARM: dts: imx6qdl-mba6: add boot phase properties
ARM: dts: imx6qdl-tqma6: add boot phase properties
ARM: dts: imx6qdl: add boot phase properties
...
- Add NXP vendor and IW61x device IDs for WiFi chips over SDIO
- Add quirk for incorrect manufacturing date
- Add support for manufacturing date beyond 2025
- Optimize support for secure erase/trim for some Kingston eMMCs
- Remove support for the legacy "enable-sdio-wakeup" DT property
- Use single block writes in the retry path
MMC host:
- dw_mmc: A great amount of cleanups/simplifications to improve the code
- dw_mmc: Add clk_phase_map support
- dw_mmc: Remove mshc DT alias support
- dw_mmc-rockchip: Fix runtime PM support for internal phase
- dw_mmc-rockchip: Add support for the RV1103B variant
- loongson2: Add support for the Loongson-2K0300 SD/SDIO/eMMC controller
- mtk-sd: Add support for the MT8189 variant
- renesas_sdhi_core: Add support for selecting an optional mux
- rtsx_pci_sdmmc: Simplify voltage switch handling
- sdhci: Stop advertising the driver in dmesg
- sdhci-esdhc-imx: Add 1-bit bus width support
- sdhci-esdhc-imx: Add support for the NXP S32N79 variant
- sdhci-msm: Add support for the IPQ5210 and IPQ9650 variants
- sdhci-msm: Add support for wrapped keys
- sdhci-msm: Enable ICE for CQE-capable controllers with non-CQE cards
- sdhci-of-arasan: Add support for the Axiado AX3000 variant
- sdhci-of-aspeed: Add support for the AST2700 variant
- sdhci-of-bst: Add driver for the Black Sesame Technologies C1200 controller
- sdhci-of-dwcmshc: Add support for the Canaan K230 variant
- sdhci-of-dwcmshc: Add support for the HPE GSC variant
- sdhci-of-dwcmshc: Prevent clock glitches to avoid malfunction
- sdhci-of-k1: Add support for the K3 variant
mux core/consumers:
- core: Add helper functions for getting optional and selected mux-state
- i2c-omap: Convert to devm_mux_state_get_optional_selected()
- phy-renesas: Convert to devm_mux_state_get_optional_selected()
- phy-can-transceiver: Convert to devm_mux_state_get_optional()
-----BEGIN PGP SIGNATURE-----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=CAAu
-----END PGP SIGNATURE-----
Merge tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Add NXP vendor and IW61x device IDs for WiFi chips over SDIO
- Add quirk for incorrect manufacturing date
- Add support for manufacturing date beyond 2025
- Optimize support for secure erase/trim for some Kingston eMMCs
- Remove support for the legacy "enable-sdio-wakeup" DT property
- Use single block writes in the retry path
MMC host:
- dw_mmc:
- A great amount of cleanups/simplifications to improve the code
- Add clk_phase_map support
- Remove mshc DT alias support
- dw_mmc-rockchip:
- Fix runtime PM support for internal phase
- Add support for the RV1103B variant
- loongson2:
- Add support for the Loongson-2K0300 SD/SDIO/eMMC controller
- mtk-sd:
- Add support for the MT8189 variant
- renesas_sdhi_core:
- Add support for selecting an optional mux
- rtsx_pci_sdmmc:
- Simplify voltage switch handling
- sdhci:
- Stop advertising the driver in dmesg
- sdhci-esdhc-imx:
- Add 1-bit bus width support
- Add support for the NXP S32N79 variant
- sdhci-msm:
- Add support for the IPQ5210 and IPQ9650 variants
- Add support for wrapped keys
- Enable ICE for CQE-capable controllers with non-CQE cards
- sdhci-of-arasan:
- Add support for the Axiado AX3000 variant
- sdhci-of-aspeed:
- Add support for the AST2700 variant
- sdhci-of-bst:
- Add driver for the Black Sesame Technologies C1200 controller
- sdhci-of-dwcmshc:
- Add support for the Canaan K230 variant
- Add support for the HPE GSC variant
- Prevent clock glitches to avoid malfunction
- sdhci-of-k1:
- Add support for the K3 variant
mux core/consumers:
- core:
- Add helper functions for getting optional and selected mux-state
- i2c-omap:
- Convert to devm_mux_state_get_optional_selected()
- phy-renesas:
- Convert to devm_mux_state_get_optional_selected()
- phy-can-transceiver:
- Convert to devm_mux_state_get_optional()"
* tag 'mmc-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (131 commits)
mmc: sdhci-msm: Fix the wrapped key handling
mmc: sdhci-of-dwcmshc: Disable clock before DLL configuration
mmc: core: Simplify with scoped for each OF child loop
mmc: core: Optimize size of struct mmc_queue_req
mmc: vub300: clean up module init
mmc: vub300: rename probe error labels
mmc: dw_mmc: Remove dw_mci_start_request wrapper and rename core function
mmc: dw_mmc: Inline dw_mci_queue_request() into dw_mci_request()
mmc: block: Use MQRQ_XFER_SINGLE_BLOCK for both read and write recovery
mmc: mmc_test: Replace hard-coded values with macros and consolidate test parameters
mmc: block: Convert to use DEFINE_SIMPLE_DEV_PM_OPS()
mmc: core: Replace the hard-coded shift value 9 with SECTOR_SHIFT
mmc: sdhci-dwcmshc: Refactor Rockchip platform data for controller revisions
mmc: core: Switch to use pm_ptr() for mmc_host_class_dev_pm_ops
mmc: core: Remove legacy 'enable-sdio-wakeup' DT property support
mmc: mmc_test: use kzalloc_flex
mmc: mtk-sd: disable new_tx/rx and modify related settings for mt8189
dt-bindings: mmc: hisilicon,hi3660-dw-mshc: Convert to DT schema
dt-bindings: mmc: sdhci-msm: add IPQ9650 compatible
mmc: block: use single block write in retry
...
The core mmc devicetree schema expects mmc controller nodes to be named
using '^mmc(@.*)?$' pattern.
The legacy Hisilicon SoC files (hi3660, hi3670, and hi6220) previously
used the 'dwmmc' prefix for their nodes. This caused warnings during
dtbs_check.
Rename the 'dwmmc' nodes to 'mmc' to comply with the standard schema and
dtbs_check warnings. The legacy phandle labels are kept intact.
Signed-off-by: Bhargav Joshi <rougueprince47@gmail.com>
Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Reboot starts failing on Poplar since commit 8424ecdde7 ("arm64: mm:
Set ZONE_DMA size based on devicetree's dma-ranges"), which effectively
changes zone_dma_bits from 30 to 32 for arm64 platforms that do not
properly define dma-ranges in device tree. It's unclear how Poplar reboot
gets broken by this change exactly, but a dma-ranges limiting zone_dma to
the first 1 GB fixes the regression.
Fixes: 2f20182ed6 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The PCIe reset GPIO on Poplar is actually active low. The active high
worked before because kernel driver didn't respect the setting from DT.
This is changed since commit 1d26a55fbe ("PCI: histb: Switch to using
gpiod API"), and thus PCIe on Poplar got brken since then.
Fix the problem by correcting the polarity.
Fixes: 32fa01761b ("arm64: dts: hi3798cv200: enable PCIe support for poplar board")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Convert the long-deprecated mshc alias to standard mmc alias.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
"snps,tx_de_emphasis" is supposed to be a u8, not a u32. Since it is big
endian, 0 will be read rather than 1. The DWC3 Linux driver simply ORs
the value if "snps,tx_de_emphasis_quirk" is set, so the 2 properties
have no effect. (The driver doesn't clear the field either which is
another problem).
"snps,gctl-reset-quirk" is not documented nor used in the driver, so
drop it as well.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260105174002.2997615-1-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
During CPU low power modes, ETM components will lose their context. Add
the "arm,coresight-loses-context-with-cpu" property to ETM nodes to save
and restore ETM context for CPU idle states.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Remove "enable-dma" and "bus-id" properties which are both unused in the
kernel and undocumented. Most likely they are leftovers from downstream.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Each syscon node must come with a dedicated/specific compatible, which
is also reported by dtbs_check:
hi3660-hikey960.dtb: usb3_otg_bc@ff200000: compatible: ['syscon', 'simple-mfd'] is too short
Link: https://lore.kernel.org/r/20240518204443.122586-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes, which might have practical impact, however things were broken for
long enough to justify pushing it regular path:
1. ARM Juno: shorten node names for thermal zones, because Linux drivers
have strict limit of 20 characters.
2. HiSilicon: correct size of GIC GICC address space and add missing
GICH and GICV spaces, add cache info to properly describe cache
topology and solve kernel boot warning.
Several cleanups:
1. Use capital "OR" for multiple licenses in SPDX.
2. Correct white-spaces for code readability.
3. Fix W=1 dtc compiler warnings, which should not have practical
impact for Amazon, APM, Cavium, Realtek, Socionext Uniphier and
Spreadtrum like:
- missing unit addresses,
- nodes not belonging to soc node,
- not using generic node names,
- few incorrect unit addresses.
-----BEGIN PGP SIGNATURE-----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=+DRC
-----END PGP SIGNATURE-----
Merge tag 'dt64-cleanup-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements in ARM64 DTS for v6.10
Fixes, which might have practical impact, however things were broken for
long enough to justify pushing it regular path:
1. ARM Juno: shorten node names for thermal zones, because Linux drivers
have strict limit of 20 characters.
2. HiSilicon: correct size of GIC GICC address space and add missing
GICH and GICV spaces, add cache info to properly describe cache
topology and solve kernel boot warning.
Several cleanups:
1. Use capital "OR" for multiple licenses in SPDX.
2. Correct white-spaces for code readability.
3. Fix W=1 dtc compiler warnings, which should not have practical
impact for Amazon, APM, Cavium, Realtek, Socionext Uniphier and
Spreadtrum like:
- missing unit addresses,
- nodes not belonging to soc node,
- not using generic node names,
- few incorrect unit addresses.
* tag 'dt64-cleanup-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt: (28 commits)
arm64: dts: cavium: thunder2-99xx: drop redundant reg-names
arm64: dts: amazon: alpine-v3: correct gic unit addresses
arm64: dts: amazon: alpine-v3: drop cache nodes unit addresses
arm64: dts: amazon: alpine-v3: add missing io-fabric unit addresses
arm64: dts: amazon: alpine-v2: move non-MMIO node out of soc
arm64: dts: amazon: alpine-v2: add missing io-fabric unit addresses
arm64: dts: apm: shadowcat: move non-MMIO node out of soc
arm64: dts: apm: storm: move non-MMIO node out of soc
arm64: dts: cavium: correct unit addresses
arm64: dts: cavium: move non-MMIO node out of soc
arm64: dts: realtek: rtc16xx: add missing unit address to soc node
arm64: dts: realtek: rtd139x: add missing unit address to soc node
arm64: dts: realtek: rtd129x: add missing unit address to soc node
arm64: dts: uniphier: ld20-global: drop audio codec port unit address
arm64: dts: uniphier: ld20-global: use generic node name for audio-codec
arm64: dts: uniphier: ld11-global: drop audio codec port unit address
arm64: dts: uniphier: ld11-global: use generic node name for audio-codec
arm64: dts: sharkl3: add missing unit addresses
arm64: dts: whale2: add missing ap-apb unit address
arm64: dts: sc9860: move GIC to soc node
...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixed regulators are not part of any MMIO bus, so they should not have
unit addresses. This fixes dtc W=1 warnings:
hi6220-hikey.dts:85.26-92.4: Warning (unit_address_vs_reg): /regulator@0: node has a unit name, but no reg or ranges property
hi6220-hikey.dts:94.27-102.4: Warning (unit_address_vs_reg): /regulator@1: node has a unit name, but no reg or ranges property
hi6220-hikey.dts:104.26-113.4: Warning (unit_address_vs_reg): /regulator@2: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
adv7533 ports should have "reg" propeties, as reported by dtc W=1
warnings:
hi6220-hikey.dts:516.11-520.6: Warning (unit_address_vs_reg): /soc/i2c@f7102000/adv7533@39/ports/port@0: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Non-MMIO devices, which are BTW not really part of the SoC, should not
be within simple-bus, as reported by dtc W=1 warning:
hip07.dtsi:1486.20-1493.5: Warning (unit_address_vs_reg): /soc/ethernet@4: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Correct dsa and pcie unit addresses to fix dtc W=1 warnings:
hip06.dtsi:439.23-571.5: Warning (simple_bus_reg): /soc/dsa@c7000000: simple-bus unit address format error, expected "c5000000"
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Non-MMIO devices, which are BTW not really part of the SoC, should not
be within simple-bus, as reported by dtc W=1 warning:
hip06.dtsi:377.18-381.5: Warning (simple_bus_reg): /soc/refclk: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Correct local-bus children unit addresses to fix dtc W=1 warnings:
hip05-d02.dts:57.16-76.4: Warning (simple_bus_reg): /soc/local-bus@80380000/nor-flash@0,0: simple-bus unit address format error, expected "0"
hip05-d02.dts:78.11-81.4: Warning (simple_bus_reg): /soc/local-bus@80380000/cpld@1,0: simple-bus unit address format error, expected "100000000"
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Non-MMIO devices, which are BTW not really part of the SoC, should not
be within simple-bus, as reported by dtc W=1 warning:
hip05.dtsi:301.30-305.5: Warning (simple_bus_reg): /soc/refclk200mhz: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
During boot, the kernel complains:
[ 0.044029] cacheinfo: Unable to detect cache hierarchy for CPU 0
So add L1/L2 cache info to the dts according to the datasheet. (32KiB L1
i-cache + 32 KiB L1 d-cache + 512 KiB L2 unified cache)
With this patch, the line above is gone and the following info is added
to the output of `lscpu`:
Caches (sum of all):
L1d: 128 KiB (4 instances)
L1i: 128 KiB (4 instances)
L2: 512 KiB (1 instance)
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240219-cache-v3-3-a33c57534ae9@outlook.com
[krzysztof: drop Fixes/cc-stable, because this is a missing feature, not
a fix]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This is needed by KVM to make use of VGIC code. Just like regular
GIC-400, PPI #9 is the hypervisor maintenance interrupt. It has been
verified.
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Link: https://lore.kernel.org/r/20240219-cache-v3-2-a33c57534ae9@outlook.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
During boot, Linux kernel complains:
[ 0.000000] GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
This SoC is using a regular GIC-400 and the GICR space size should be
8KB rather than 256B.
With this patch:
[ 0.000000] GIC: Using split EOI/Deactivate mode
So this should be the correct fix.
Fixes: 2f20182ed6 ("arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board")
Signed-off-by: Yang Xiwen <forbidden405@outlook.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240219-cache-v3-1-a33c57534ae9@outlook.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Clean up the SPMI node by dropping the redundant status property and
moving the 'reg' property after 'compatible' for consistency.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The Hi6421 PMIC regulator child nodes do not have unit addresses so drop
the incorrect '#address-cells' and '#size-cells' properties.
Fixes: 6219b20e1e ("arm64: dts: hisilicon: Add support for Hikey 970 PMIC")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The DTS code coding style expects exactly one space before and after '='
sign.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
We want to unify the pinctrl-single pin group nodes to use naming "pins".
Otherwise non-standad pin group names will add make dtbs checks errors
when the pinctrl-single yaml binding gets merged.
Let's also correct the pinctrl controller #size-cells to 0 while at it.
Cc: Conor Dooley <conor+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
As all level 2 and level 3 caches are unified, add required
cache-unified properties to fix warnings like:
hi3660-hikey960.dtb: l2-cache0: 'cache-unified' is a required property
Link: https://lore.kernel.org/r/20230421223215.115666-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The node names should be generic and DT schema expects certain pattern:
hisilicon/hi3660-hikey960.dtb: leds: wlan_active_led: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)
Link: https://lore.kernel.org/r/20221125144140.477225-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The DeviceTree Specification v0.3 specifies that the cache node
'compatible' and 'cache-level' properties are 'required'. Cf.
s3.8 Multi-level and Shared Cache Nodes
The 'cache-unified' property should be present if one of the
properties for unified cache is present ('cache-size', ...).
Update the Device Trees accordingly.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Align the name of operating-points node to dtschema to fix warnings like:
cpu_opp_table: $nodename:0: 'cpu_opp_table' does not match '^opp-table(-[a-z0-9]+)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
compatible = "arm,sp805", "arm,primecell";
The current compatible string doesn't exist at all. Fix it.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Add a device tree for the HiSilicon 6421v600 SPMI PMIC, used
on HiKey970 board.
As we now have support for it, change the fixed regulators
used by the SD I/O to use the proper LDO supplies.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
When the driver is registered, it produces a warning when
registering the PCI bridge:
[ 5.363450] pci_bus 0000:00: root bus resource [bus 00-01]
[ 5.396998] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-01] (conflicts with (null) [bus 00-01])
[ 5.284831] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
The reason is that the bus-range is wrong. Address it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
s/Hisilicon/HiSilicon/.
It should use capital S, according to the official website
https://www.hisilicon.com/en.
Signed-off-by: Hao Fang <fanghao11@huawei.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The I2C buses are not declared at the device tree. As this will
be needed by further patches, add them, keeping all in
disabled state. Per-board settings can override it.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
There are several pinctrl settings that are missing at this
DT file.
Also, the entries are out of order.
Add the missing bits, as they'll be required by the DRM driver - and
probably by other drivers not upstreamed yet.
Reorder the entres, adding the missing bits.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
This is required in order to support USB.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
The "smmu-cb-memtype" is a private property developed by the Hisilicon
driver in the early stage and is not used now. So delete it.
Otherwise, below YAML check warnings are reported:
arch/arm64/boot/dts/hisilicon/hip06-d03.dt.yaml: iommu@a0040000: \
'smmu-cb-memtype' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/hisilicon/hip07-d05.dt.yaml: iommu@a0040000: \
'smmu-cb-memtype' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
