In lm25066_probe(), the PMBus coefficients for current and power are
scaled based on the shunt resistor value. The calculation evaluates the
multiplication using 32-bit arithmetic because info->m is an int and
shunt is a u32:
static int lm25066_probe(struct i2c_client *client) {
...
info->m[PSC_CURRENT_IN] = info->m[PSC_CURRENT_IN] * shunt / 1000;
info->m[PSC_POWER] = info->m[PSC_POWER] * shunt / 1000;
...
}
For large coefficients like 26882 (LM25056) or 15076 (LM5066i), a device
tree shunt-resistor-micro-ohms value exceeding approximately 159,000
(159 mOhm, which is physically valid for low-current applications) causes
the intermediate product to exceed UINT_MAX (4,294,967,295). This results
in a silent wraparound before the division by 1000.
Furthermore, if the wrapped value has the most significant bit set,
converting it back to the signed int info->m results in negative
coefficients. This logic error leads to drastically corrupted current and
power readings, which can cause erratic thermal or power management
behavior in the system.
Fix the problem by using 64-bit operations for the multiply/divide
operations. This can still overflow, but only for unreasonably large
shunt resistor values.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Fixes: 94ee5fcc24 ("hwmon: (pmbus/lm25066) Support configurable sense resistor values")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
I hit the following on one of my machines:
mce: CPU0 BANK15 CMCI inherited storm
------------[ cut here ]------------
ODEBUG: assert_init not available (active state 0) object: (____ptrval____) object type: timer_list hint: 0x0
WARNING: lib/debugobjects.c:632 at debug_object_assert_init+0x178/0x230, CPU#0: swapper/0/0
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 7.2.0-rc5 #3 PREEMPTLAZY
RIP: 0010:debug_object_assert_init+0x18f/0x230
Call Trace:
<TASK>
__mod_timer
mce_timer_kick
cmci_discover
intel_init_cmci
mce_intel_feature_init
mcheck_cpu_init
identify_cpu
identify_boot_cpu
arch_cpu_finalize_init
start_kernel
A second splat follows right after, from timer_setup() finding that same
timer already queued:
ODEBUG: init active (active state 0) object: (____ptrval____) object type: timer_list hint: stub_timer+0x0/0x10
This is happening because CMCI storm detection is trying to modify the timer
before latter was properly set up.
Set up the timer first. __mcheck_cpu_setup_timer() only calls timer_setup(),
and depends on neither the generic nor the vendor init.
[ bp: Massage commit message. ]
Fixes: 1f68ce2a02 ("x86/mce: Handle Intel threshold interrupt storms")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260803-mce_timer_init-v1-1-9539db424330@debian.org
in6_dev_get() reads dev->ip6_ptr under RCU and then unconditionally
increments its refcount. Device teardown can clear the pointer and drop
the last reference between these operations. The increment then
resurrects an object whose RCU free has already been queued, so callers
can use it after it is freed.
Use refcount_inc_not_zero() and return NULL when the object has already
reached zero. RCU keeps the memory accessible through the attempted
reference acquisition, and a successful increment pins the object for
the caller.
An independent run on the exact unpatched 6f5156d7a3 (v7.2-rc3)
kernel reproduced the invalid reference acquisition as UID 1000:
refcount_t: addition on 0; use-after-free.
ip6_mc_source+0xef4/0x17e0
It was followed by the corresponding reference underflow in
ip6_mc_source(). The supplied trace from the same unpatched revision
additionally shows the access after the RCU read-side section ends:
BUG: KASAN: slab-use-after-free in mutex_lock+0x76/0xe0
Write of size 8 at addr ffff888015b50240 by task poc/1219
Bug found and triaged by OpenAI Security Research and
validated by Trail of Bits.
Fixes: 8814c4b533 ("[IPV6] ADDRCONF: Convert addrconf_lock to RCU.")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Zeng <kylebot@openai.com>
Co-developed-by: David Lee <david.lee@trailofbits.com>
Signed-off-by: David Lee <david.lee@trailofbits.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260803122758.666112-1-david.lee@trailofbits.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A small number of fixes that seem too important to
wait until the next release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCgAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmpxXrUPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpX5IIAJhVIR6djPQ/Hf24pHD+wHPAvKbV4+CCrtlv
S/Frw7R8bTn0byvr3iuAHcuWLKSMXPYxfGKQRI1E7E4vbbKD81N0p+vYiO41pyV6
d7BKUxSIEOEExJ8c198ajo+S2n5OdLjayLfYagzqbClwb2Snz+mdGjBIcSLJttSb
i53LebWHDXV8/uZLkyd0H8YlHXHmxroIOq16UpwwvO+lgafxZPs6ZinBS5fwEJxk
fyKKf1rdoPbqQhrDU5IaHlQdqS+ZjL+3ab3rT49wCSnn+FKpzzikhxELNylZZMof
StC/Y3HAbC8rY54ZMjxGcDt1KfntRchZySuOmhZ/Av+sCXaegm0=
=EMjO
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull vhost/vdpa fixes from Michael Tsirkin:
"A small number of fixes that seem too important to
wait until the next release"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-scsi: reject feature changes after endpoint
vhost-scsi: flush backend after device ioctls
vhost: reset the vring metadata cache on vring reconfiguration
vhost-scsi: Validate T10 PI scatterlist counts
vdpa/mlx5: Fix buffer length in create_direct_keys()
vhost/vdpa: reject overflowing PA map page counts on 32-bit
vhost_iotlb: bound map allocation in add_range
The init_device() call in nzxt_smart2_hid_probe() can fail because it
sends HID output reports to the hardware to detect fans and set the
update interval. If the hardware is not responding or the HID reports
fail, init_device() returns a negative error code.
However, the return value was ignored, causing the probe to continue
and register an hwmon device even though the device was never properly
initialized. This leads to an inconsistent state where the driver
reports stale data or blocks on wait queues that will never be woken.
The same function's return value is already checked in the
reset_resume() handler, confirming the author's intent that errors
should be propagated.
Note that this fix was not possible before commit 59d104b54b
("hwmon: (nzxt-smart2) Stop device IO before calling hid_hw_stop")
because the out_hw_close error path was missing hid_device_io_stop(),
which would have opened a use-after-free risk window.
Fixes: 53e68c20ae ("hwmon: add driver for NZXT RGB&Fan Controller/Smart Device v2.")
Signed-off-by: Qingshuang Fu <fuqingshuang@kylinos.cn>
Link: https://lore.kernel.org/r/20260804074842.505923-1-fffsqian@163.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add Ryan and Billy as reviewers for ASPEED SoC patches. I asked both to add
themselves to increase ASPEED's visibility of upstream changes.
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCanGGJhwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmDFoA+wVan8QYBaVyH4ESK0nz
73koP4V+NcoMRFeH7WHlKi3yAQDkXhq553bJXUlEhM8Gmy8A+29bjc1YsbwqQ1k9
DBw6DA==
=IW7p
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=qDYR
-----END PGP SIGNATURE-----
Merge tag 'aspeed-7.3-maintainers-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
aspeed: Update MAINTAINERS for 7.3
Add Ryan and Billy as reviewers for ASPEED SoC patches. I asked both to add
themselves to increase ASPEED's visibility of upstream changes.
* tag 'aspeed-7.3-maintainers-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
MAINTAINERS: add Ryan Chen and Billy Tsai as reviewer for ARM/ASPEED
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Again a one-off change, fixing OF resource leaks in the SMP-bringup code for the
NPCM7xx SoCs.
-----BEGIN PGP SIGNATURE-----
iJEEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCanGNzhwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGm7q0BALVNMCCpkq7EUdoXlLXQ
kKLaa/eHSsRjlVkWysp8KMNhAPitU483DtqvcGiPeLD/ljIc4SC6CubwoE0YcNdg
SCkL
=jyvO
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=g+dz
-----END PGP SIGNATURE-----
Merge tag 'nuvoton-7.2-arm-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
nuvoton: First batch of ARM arch fixes for 7.2
Again a one-off change, fixing OF resource leaks in the SMP-bringup code for the
NPCM7xx SoCs.
* tag 'nuvoton-7.2-arm-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
ARM: npcm: Fix OF node refcount leaks in SMP setup
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQQdXVVFGN5XqKr1Hj7LwZzRsCrn5QUCanIVbBQcem9oYXJAbGlu
dXguaWJtLmNvbQAKCRDLwZzRsCrn5ZZJAPoCMJOvZSkj5EZVUr/fsO6MiC8rQDu6
OhNe4lripeVOowD/RapG1/PcGuYNlqtOxjFaB/Y0FYRH2hnGHpgqW/If0ws=
=2zQ5
-----END PGP SIGNATURE-----
Merge tag 'integrity-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity fixes from Mimi Zohar:
"Two IMA bug fixes: one addresses a potential integer underflow, the
other instantiates two LSM hooks"
* tag 'integrity-v7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: Instantiate file_truncate and path_truncate hooks
ima: fix out-of-bounds read in xattr_verify()
VFs were missing the call to apply the global scheduling policy.
Call xe_guc_submit_enable() during vf_uc_load_hw() to ensure VFs
get the same policy enforcement as PF.
Fixes: 26caeae9fb ("drm/xe/guc: Set RCS/CCS yield policy")
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Marcin Bernatowicz <marcin.bernatowicz@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patch.msgid.link/20260709075945.1337660-1-marcin.bernatowicz@linux.intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit f09360e857130f7ab7f069e2421e6b4a6e502531)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The q->replay_state is blindly overwritten, which can potentially leak
memory that was previously allocated by vmemdup_user().
Return an error if q->replay_state is not empty.
Discovered using AI-assisted static analysis confirmed by Intel Product
Security.
Reported-by: Martin Hodo <martin.hodo@intel.com>
Fixes: 1026c1a73a ("drm/xe: Implement DRM_XE_EXEC_QUEUE_SET_HANG_REPLAY_STATE")
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260624111421.1258364-1-michal.winiarski@intel.com
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry picked from commit f6b6cc1118bdbc4265fa8b3bdf8565b26f13e56e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Instantiate the file_truncate and path_truncate LSM hooks to reset the
action cache flags (IMA_DONE_MASK) as soon as truncation is requested,
so the file, based on policy, is re-collected, re-measured, re-audited,
and re-appraised on next access.
Tested-by: Frederick Lawler <fred@cloudflare.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The digest-length check in xattr_verify() mixes int and size_t:
if (xattr_len - sizeof(xattr_value->type) - hash_start >=
iint->ima_hash->length)
sizeof() yields size_t, so the usual arithmetic conversions promote
the whole left-hand side to unsigned 64-bit before the subtraction
runs. For a truncated xattr this underflows instead of going negative:
a 1-byte IMA_XATTR_DIGEST_NG xattr (xattr_len == 1, hash_start == 1)
turns "1 - 1 - 1" into SIZE_MAX, which is trivially >= ima_hash->length.
The check then passes and the following memcmp() reads
iint->ima_hash->length bytes starting past the end of the buffer
vfs_getxattr_alloc() allocated for it.
Nothing upstream clamps xattr_len back into a safe range first:
ima_get_hash_algo() only special-cases xattr_len < 2 to pick a default
algorithm, and evm_verifyxattr() returns INTEGRITY_UNKNOWN rather than
failing when no HMAC key is loaded, so a truncated security.ima value
reaches the length check as-is.
Rewrite the comparison so every operand stays a signed int and no
implicit conversion to size_t can occur.
Fixes: 3ea7a56067 ("ima: provide hash algo info in the xattr")
Cc: stable@vger.kernel.org
Signed-off-by: Lincoln Wallace <locnnil0@gmail.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
capture_urb_complete() resubmits each capture URB without anchoring it:
usb_get_urb(urb);
ret = usb_submit_urb(urb, GFP_ATOMIC);
Anchoring is a property of a submission, not of the URB. The giveback
path calls usb_unanchor_urb() before urb->complete(), so an URB
resubmitted from its own completion handler is off the anchor. The
capture URBs are anchored once, at stream start, so from the first
completion onward tascam->capture_anchor is empty.
tascam_free_urbs(), tascam_disconnect(), tascam_suspend() and the
stop-work path all call usb_kill_anchored_urbs(&tascam->capture_anchor)
to reap the capture URBs before anything is freed. With the anchor empty
those calls return immediately and the URBs stay queued on the host
controller.
tascam_free_urbs() then returns the capture transfer buffers with
usb_free_coherent(), and snd_card_free() releases the snd_card
allocation that embeds tascam (card->private_data). The controller
completes the queued URBs afterwards, writing device-supplied data into
the freed transfer buffer, and capture_urb_complete() dereferences the
freed driver object.
KASAN on 7.2.0-rc5 (arm64):
BUG: KASAN: slab-use-after-free in dummy_timer
Write of size 512 at addr ffff000015b62000
__asan_memcpy
dummy_timer
hrtimer_run_softirq
Allocated by task 64:
usb_alloc_coherent
tascam_alloc_urbs
tascam_probe
Freed by task 170:
usb_free_coherent
tascam_free_urbs
tascam_disconnect
usb_unbind_interface
BUG: KASAN: slab-use-after-free in capture_urb_complete
Read of size 4 at addr ffff0000170ee878
Freed by task 170:
release_card_device
snd_card_free
tascam_disconnect
Restore the usb_anchor_urb() between the reference count bump and the
resubmission. That also makes the handler's usb_unanchor_urb() failure
arm meaningful again and restores usb_kill_anchored_urbs() as a barrier
on the disconnect, suspend and stop-work paths.
The anchoring was removed on the premise that the URB is already anchored
from the initial submission, which does not hold once the first giveback
has run.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 5cff1529a2 ("ALSA: us144mkii: capture_urb_complete: redundant usb_anchor_urb corrupts anchor list on each resubmission")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260804123625.91769-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
fcp_ioctl_set_meter_map() bounds the user-supplied Level Meter map size
by the driver's own limit of 255
if (map.map_size < 1 || map.map_size > 255 ||
map.meter_slots < 1 || map.meter_slots > 255)
return -EINVAL;
and passes it to fcp_add_new_ctl() as the control's channel count, where
it is stored as elem->channels.
Every control read writes into struct snd_ctl_elem_value, whose integer
array is declared long value[128], so the limit is 128, not 255.
fcp_meter_ctl_get() stores one 64-bit word per channel into that array
with no bound of its own:
for (i = 0; i < elem->channels; i++) {
int idx = private->meter_level_map[i];
int value = idx < 0 ? 0 : le32_to_cpu(resp[idx]);
ucontrol->value.integer.value[i] = value;
}
snd_ctl_elem_read_user() serves that object from
memdup_user(_control, sizeof(*control)), 1224 bytes on LP64 out of
kmalloc-2048. offsetof(struct snd_ctl_elem_value, value) is 72, so
element i is written at byte 72 + 8 * i and element 144 already lands
past the allocation. At map_size 255 the last store ends at byte 2112,
888 bytes past the object and 64 bytes into the adjacent slab object.
The stored words come from the device and meter_level_map[] selects
which word lands in which slot, so extent and contents are both
controlled.
The core does not catch this. snd_ctl_check_elem_info() is reached only
from __snd_ctl_elem_info(), which snd_ctl_elem_read() calls under
CONFIG_SND_CTL_DEBUG; without that option snd_ctl_skip_validation() is a
compile-time true. __snd_ctl_add_replace() validates kcontrol->count and
never inspects elem->channels.
Installing an oversized map needs CAP_SYS_RAWIO, but the control outlives
the hwdep descriptor that created it, so the out-of-bounds stores are
issued by any process able to read controls on /dev/snd/controlC0.
KASAN on 7.2.0-rc5 (arm64), triggered by an unprivileged control read:
BUG: KASAN: slab-out-of-bounds in fcp_meter_ctl_get
Write of size 8 at addr ffff000017af04c8 by task fcp_trigger/185
__asan_store8
fcp_meter_ctl_get
snd_ctl_elem_read
snd_ctl_ioctl
Allocated by task 185:
memdup_user
snd_ctl_ioctl
The buggy address is located 0 bytes to the right of
allocated 1224-byte region [ffff000017af0000, ffff000017af04c8)
Bound the map size by the ABI limit rather than by 255, and bound the
store loop at the sink so it cannot run past the value array whatever
elem->channels holds.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com>
Fixes: 46757a3e7d ("ALSA: FCP: Add Focusrite Control Protocol driver")
Reported-by: Federico Kirschbaum <federico.kirschbaum@xbow.com>
Reported-by: Baul Lee <baul.lee@xbow.com>
Cc: stable@vger.kernel.org
Signed-off-by: Baul Lee <baul.lee@xbow.com>
Link: https://patch.msgid.link/20260804123611.91715-1-baul.lee@xbow.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
As reported by Jiri Vozar, commit 7edea6e8c8 ("selinux: beef up
isvalid checks") introduces a new loop in mls_level_isvalid() that
causes ~89-94% throughput regression in System V IPC message queue
operations (msgsnd/msgrcv).
Move the expensive part of the ebitmap checking to policy load time
instead as the reporter suggested.
Link: https://lore.kernel.org/selinux/CAMgFczCi2Z011dNf84Amc0Q-qnTt0+VUjWY+Y7zPyXdaH35Jvw@mail.gmail.com/
Fixes: 7edea6e8c8 ("selinux: beef up isvalid checks")
Reported-by: Jiri Vozar <jvozar@redhat.com>
Suggested-by: Jiri Vozar <jvozar@redhat.com>
Signed-off-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Another challenge with unlocked filters.
There is a short window in tc_new_tfilter where a tcf_proto can be found
and briefly referenced by a totally unrelated, unlocked classifier's request
and cause a race.
Feng created a poc which created this race with two threads, one creating a
u32 filter and other a flower filter in the same chain/prio:
1. Both threads enter tc_new_tfilter, both find the chain empty, both
drop filter_chain_lock
2. u32 finishes tcf_proto_create("u32") first, calls
tcf_chain_tp_insert_unique() -> inserts u32_tp into the chain
3. flower finishes tcf_proto_create("flower") later, calls
tcf_chain_tp_insert_unique() -> tcf_chain_tp_find() now sees u32_tp
already there, takes a reference on it, destroys flower's own tp_new
and returns u32_tp to the caller.
Flower then hits the kind mismatch check (because it requested for kind
"flower" but tp->ops->kind is "u32") and goes through the errout path
which calls tcf_proto_put() on u32_tp. If the u32 thread has already
gone through its own errout (its change() call failed on the PoC's empty
options) and dropped its create and insert refs, flower's put is the
last one and drops u32_tp's refcnt to zero.
At this point tp->ops->destroy() runs in a context that never took
rtnl_lock. When that happens, it might cause a UAF like the following
(illustrated by the PoC):
[ +0.000710] BUG: KASAN: slab-use-after-free in u32_init (net/sched/cls_u32.c:393)
[ +0.000281] Read of size 8 at addr ffff888120022f00 by task poc_feng_xue/524
Call Trace:
u32_init (net/sched/cls_u32.c:393)
tc_new_tfilter (net/sched/cls_api.c:2378)
Allocated by task 526:
u32_init (net/sched/cls_u32.c:378)
tc_new_tfilter (net/sched/cls_api.c:2378)
Freed by task 522:
kfree
u32_destroy (net/sched/cls_u32.c:662)
tcf_proto_destroy (net/sched/cls_api.c:446)
tcf_proto_put (net/sched/cls_api.c:459)
tc_new_tfilter (net/sched/cls_api.c:2459)
Fix this by having tcf_proto_destroy() take rtnl_lock around
tp->ops->destroy() for locked classifiers whenever rtnl is not held.
To explain why I used a temp variable "not_lockless" I'd like to point to a
semi-related note on rtnl_held vs TCF_PROTO_OPS_DOIT_UNLOCKED (adding here
for future cleanup if deemed necessary):
The rtnl_held parameter and the TCF_PROTO_OPS_DOIT_UNLOCKED flag are
redundant sources of truth for whether rtnl_lock is held. Among the nine
classifier destroy(..rtnl_held..) callbacks, only flower consults the
rtnl_held parameter which it propagates to tc_setup_cb_destroy()
and tc_setup_cb_call(). The other eight (u32, flow, bpf, cgroup, route, basic,
fw, mall) ignore it entirely;-> those that call tc_setup_cb_destroy()
(u32, bpf, mall) hardcode true always instead of forwarding the parameter.
A future cleanup should remove the rtnl_held parameter from the destroy callback
signature entirely and have callers rely solely on their knowledge whether
they are running in an unlocked context.
Fixes: 12db03b65c ("net: sched: extend proto ops to support unlocked classifiers")
Reported-by: Feng Xue <feng.xue@outlook.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260801125632.360365-1-jhs@mojatatu.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The security team is still seeing a lot of reports lacking a full patch
and showing missing contents and formatting issues. Since AI assistants
tend to be better than humans at following instructions, let's defer to
coding-assistants.rst to follow mandatory steps, and insist on the plain
text format, as well as asking for recipient addresses and an e-mail
client setup hint to be mentioned early in the report for the reporter.
Also add a link to https://github.com/masoncl/kres.git which contains
way more advanced and detailed steps for those willing to go further.
Tested with Opus-5 and Qwen3.6-27B-Architect-Polaris2-Fable-B-F451, both
of which proceeded according to instructions.
Cc: Greg KH <greg@kroah.com>
Cc: Chris Mason <clm@meta.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260802203540.3453-6-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Due to the increasing capabilities of available AI models, it's becoming
common to see them used to find bugs anywhere. Unfortunately the quality
of reports (especially when they're believed to be security relevant) is
still lacking a lot.
Let's add a section dedicated to bug finding, explaining the few
mandatory steps (noting commit ID, writing the fix from the session that
found the bug, building and testing, etc). This was tested both against
Qwen3.6-27B-Architect-Polaris2-Fable-B-F451 running under Hermes, and
Opus-5, and both followed the instructions to the letter, verifying
their results and checking threat-model.rst to decline the vulnerability
aspect. At least in the current form it's expected to improve the
situation a little bit.
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260802203540.3453-5-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Too often we're getting reports saying "still valid in latest mainline"
with no indication of when this was verified, making this indication
pointless. Let's clarify it and insist on having a version or commit ID,
and that the version must necessarily be for a kernel.org kernel and not
a distro one.
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260802203540.3453-4-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When originally writing the "fake USB device" entry, it was difficult
to find a suitable section for it and it ended up in "non production
use" but that doesn't fit particularly well. Actually it's very similar
to crafted filesystems, it's a matter of spec violation. Both drivers
and FS are written against a spec, and what the threat model doesn't
cover is out-of-spec use. So let's move the entry there and rename the
crafted FS entry to "Non-conforming devices and media" instead.
Overall it looks more consistent.
The spec was tested agains Qwen3.6-27B-Architect-Polaris2-Fable-B-F451,
Opus-5 and Gemini by reading the threat-model file, then reading a tens
of FS and driver fixes, and they were now all properly classified as
regular bugs, except two that Gemini and Opus rightfully classified as
vulns (Qwen didn't spot the security potential but that's out of our
scope).
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260802203540.3453-3-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Throwing an LLM (Opus 5) at a file looking for random bugs after having
read the threat model made it ignore certain bugs it found because "the
threat model said they must be ignored". When asked why, the LLM
rightfully reported the ambiguous wording used at a few places:
"is not a security bug", which can also be read as "is not a bug",
despite the rest of the document. That is particularly true when the
LLM decides to look for info using grep.
This change replaces "security bug" with "vulnerability" at a few places
in order to remove this identified ambiguity, and uses "bugs" instead of
issues in two such sentences to insist that what is described remains a
bug.
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260802203540.3453-2-w@1wt.eu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the ->huge_fault handler do not install a PMD huge page
mapping if the huge page exceeds the boundaries of the VMA.
All other ->huge_fault handlers have similar checks and the
resulting mapping will trigger a VM_BUG_ON_VMA() if it ever
reaches copy_pmd_range().
Cc: Pedro Demarchi Gomes <pedrodemargomes@gmail.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: stable@vger.kernel.org
Fixes: fc3bbf34e6 ("drm/shmem-helper: Fix huge page mapping in fault handler")
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20260622215718.1532689-1-lk@c--e.de
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
When a packet arrives on an ARPHRD_NONE device (e.g. TUN),
ovs_flow_key_extract() trusts the user-provided skb->protocol field: if
it is ETH_P_TEB, the packet is classified as MAC_PROTO_ETHERNET and
key_extract() is called without ensuring the skb has ETH_HLEN (14) bytes
of linear data. key_extract() unconditionally pulls 2 * ETH_ALEN bytes
for MAC addresses and parse_ethertype() pulls 2 more, either of which
triggers a kernel BUG in __skb_pull() when the linear area is too small.
kernel BUG at include/linux/skbuff.h:2848!
RIP: 0010:key_extract+0xa7e/0xd90 net/openvswitch/flow.c:933
ovs_flow_key_extract+0x419/0xa70
ovs_vport_receive+0x222/0x390
netdev_frame_hook+0x3e0/0x630
tun_get_user+0x2d0c/0x38e0
Fixed by calling check_header() in key_extract() before accessing the
Ethernet header.
Fixes: 217ac77a3c ("openvswitch: allow L3 netdev ports")
Reported-by: AutonomousCodeSecurity@microsoft.com
Reviewed-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260730222006.118652-1-blbllhy@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
packet_set_ring() updates the RX ring state under sk_receive_queue.lock,
but used to publish the tpacket receive mode through po->prot_hook.func
after releasing that lock. packet_poll() and packet_recvmsg() can then
run the pressure clearing path after the ring has been cleared while
still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference
stale or NULL ring storage.
Move the existing receive hook assignment into the same
sk_receive_queue.lock section as the ring state update. Keep the
assignment otherwise unchanged, including on TX ring reconfiguration, to
avoid adding behavior changes that are not required for the fix.
Serialize packet_recvmsg() pressure clearing with the same queue lock
only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear
and the socket has moved away from tpacket_rcv, packet_set_ring() has
already detached the socket and waited for synchronize_net(), so no new
packet input can set the flag again.
packet_poll() already holds sk_receive_queue.lock, so it uses the new
unlocked helper directly.
Fixes: 2ccdbaa6d5 ("packet: rollover lock contention avoidance")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Assisted-by: Codex:gpt-5.4
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Link: https://patch.msgid.link/f90b5688311fa278d1361ea8c6be0bf25967d591.1785247446.git.zihanx@nebusec.ai
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This time it's a single fix for a kfifo overrun, caused by the the lpc-snoop
driver implementation behaving as multiple consumers.
-----BEGIN PGP SIGNATURE-----
iJIEABYKADoWIQSoUT1x3bOSX/nAa8ajM9GZTrjhpgUCanGJnxwcYW5kcmV3QGNv
ZGVjb25zdHJ1Y3QuY29tLmF1AAoJEKMz0ZlOuOGmFzUA/RYKJEPxwID+xqkE6wtz
oJjsSkOqFzhjixC5AafLnz6OAQCe2bJyi7AWkBG2EiBKBp2GIvF1pZ1md4KXDDPw
P7qICQ==
=VvQf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=JG8D
-----END PGP SIGNATURE-----
Merge tag 'aspeed-7.2-driver-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux into arm/fixes
aspeed: First batch of driver fixes for 7.2
This time it's a single fix for a kfifo overrun, caused by the the lpc-snoop
driver implementation behaving as multiple consumers.
* tag 'aspeed-7.2-driver-fixes-0' of https://git.kernel.org/pub/scm/linux/kernel/git/bmc/linux:
soc: aspeed: lpc-snoop: Fix usercopy overflow in snoop_file_read
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
xhci is unusable on some systems after driver switched to BIT() macro.
Upper 32bits of 64bit CRCR command register are unintentionally cleared.
Seen on a raspberry pi 4B compiled for arm32.
The main symptoms were the following log message:
[ 0.549897] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-02-25T12:11:39
[ 0.626859] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.626889] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1
[ 0.812619] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000200000000890
[ 0.813188] xhci_hcd 0000:01:00.0: xHCI Host Controller
[ 0.813203] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2
[ 0.813219] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed
[ 0.813602] hub 1-0:1.0: USB hub found
[ 0.814052] hub 2-0:1.0: USB hub found
[ 0.952714] xhci_hcd 0000:01:00.0: ERROR mismatched command completion event
Additionally running lsusb just hangs. Running the same kernel compiled
for aarch64 worked fine. Bisected to the commit in the Fixes line.
Additionally a USB device plugged in to the USB3.0 (or 2.0) did not
enumerate. Once this patch is applied the USB device enumerates properly.
The CRCR register is 64 bits wide - commit abe93f27cd
("xhci: use BIT macro") changed the flag definitions from (1 << n),
a signed int, to BIT(n), an unsigned long. Within
xhci_set_cmd_ring_deq(), the following operation is performed on the
CRCR register:
...
crcr &= ~CMD_RING_PTR_MASK;
crcr |= deq_dma;
crcr &= ~CMD_RING_CYCLE;
crcr |= xhci->cmd_ring->cycle_state;
...
Previously, ~CMD_RING_CYCLE was ~(int)1, a negative signed value
(0xFFFFFFFE with the sign bit set). Widening a negative signed int to
u64 sign-extends it to 0xFFFFFFFFFFFFFFFE, correctly clearing only bit
0 and preserving the 64-bit pointer written two lines above.
After the change when running on 32 bit kernels, ~CMD_RING_CYCLE is
~(unsigned long)1UL. On a 32-bit host this is an unsigned 32-bit
value (0xFFFFFFFE, no sign bit). Widening an unsigned value to u64
zero-extends it instead (0x00000000FFFFFFFE), so the subsequent AND
silently clears bits 63:32 of crcr, truncating the command ring
pointer that was just written before the value reaches hardware.
To fix, similar to how CMD_RING_PTR_MASK is defined, make sure we
use the BIT_ULL variant when defining the CRCR bits.
[Mathias: use BIT_ULL() for ERST_EHB and EP_CTX_CYCLE_MASK as suggested
by Michal Pecio, also include raspberry case in commit message]
Fixes: abe93f27cd ("xhci: use BIT macro")
Cc: stable <stable@kernel.org>
Assisted-by: Claude:claude-sonnet-5
cc: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Lachlan Hodges <lachlan.hodges@morsemicro.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260804083639.2148950-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers says:
====================
Fixes for bpf_get_fsverity_digest()
Two fixes for bpf_get_fsverity_digest().
Changed in v2:
- Added patch to fix silent truncation.
- Updated commit message to clarify that the size > INT_MAX case
seems to be unreachable currently.
- Added Acked-bys
====================
Link: https://patch.msgid.link/20260803181232.14743-1-ebiggers@kernel.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
bpf_get_fsverity_digest() silently truncates the digest if the provided
buffer is too small. This is a footgun, and it doesn't match the
semantics of the equivalent UAPI (FS_IOC_MEASURE_VERITY).
Change it to return -EOVERFLOW instead, matching FS_IOC_MEASURE_VERITY.
Fixes: 67814c00de ("bpf, fsverity: Add kfunc bpf_get_fsverity_digest")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20260803181232.14743-3-ebiggers@kernel.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The BPF verifier and the dynptr abstraction ensure that the memory space
referenced by a dynptr remains valid. They do not, however, provide any
guarantee that the contents of the memory are stable. kfuncs are
expected to remain memory-safe even if concurrent modifications occur.
bpf_get_fsverity_digest() didn't follow that: it could crash if
arg->digest_size was concurrently modified.
Fix that by using the known-good value hash_alg->digest_size instead.
Also widen 'dynptr_sz' and 'out_digest_sz' to u64 to match the return
type of __bpf_dynptr_size(). It doesn't appear that it can actually be
more than INT_MAX currently (since __bpf_dynptr_data_rw() excludes
file-based pointers), but the correct type might as well be used.
Fixes: 67814c00de ("bpf, fsverity: Add kfunc bpf_get_fsverity_digest")
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/bpf/20260803181232.14743-2-ebiggers@kernel.org
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The driver allocates max_touch_num input slots, which are indexed from
zero through max_touch_num - 1. The current check allows a finger ID
equal to max_touch_num to reach cst3xx_report_contact(). While the input
core ignores out-of-range slot indices, reporting touch data without a
valid slot change corrupts the touch state of the previously active slot.
The touch count is read from the controller's report and is used to
index the fixed-size report buffer without first checking its range.
Reject counts larger than the supported number of touch slots before
checking the trailing byte or parsing touch data.
Reject finger IDs equal to or greater than max_touch_num, and return
immediately when an invalid finger ID is encountered so that corrupt
touch frames are discarded instead of reporting partial contact state.
The V821 Avaota F1 board configures the vendor driver with one touch
slot, so finger ID 1 is already invalid on that device.
Fixes: 66603243f5 ("Input: add driver for Hynitron cstxxx touchscreens")
Signed-off-by: Jianing Li <m13940358460@163.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260804031339.2379-1-m13940358460@163.com
Assisted-by: Antigravity:gemini-3.6-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add Ryan Chen and myself as a reviewer for the ARM/ASPEED MACHINE SUPPORT
entry to reflect ongoing review and contribution work on AST2xxx/AST27xx
platform support.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
vhost_scsi_setup_vq_cmds() runs from VHOST_SCSI_SET_ENDPOINT and allocates
each command's protection scatterlist array (prot_sgl) according to the
acknowledged VIRTIO_SCSI_F_T10_PI bit. The command pools are not rebuilt
when VHOST_SET_FEATURES changes that bit later.
Although virtio feature bits must not change after feature negotiation,
vhost_scsi_set_features() currently accepts such a request after the
endpoint is active and updates acked_features. Enabling T10-PI after
endpoint setup therefore leaves prot_sgl NULL while the I/O path follows
the new feature bit.
For a 129-page protection payload, vhost_scsi_mapal() passes the missing
first chunk to sg_alloc_table_chained():
sg_alloc_table_chained(table, 129, first_chunk=NULL,
nents_first_chunk=inline_sg_cnt)
sg_pool_index() then hits:
BUG_ON(nents > SG_CHUNK_SIZE); /* 129 > 128 */
The kernel reported the following call trace and register state:
Call Trace:
<TASK>
? __sg_alloc_table+0x1d8/0x250
? __pfx_vhost_run_work_list+0x10/0x10 [vhost]
sg_alloc_table_chained+0x59/0xf0
? __pfx_sg_pool_alloc+0x10/0x10
? vhost_scsi_calc_sgls.constprop.0+0x43/0x60 [vhost_scsi]
vhost_scsi_handle_vq+0xf02/0x1700 [vhost_scsi]
? __pfx_vhost_scsi_handle_vq+0x10/0x10 [vhost_scsi]
vhost_scsi_handle_kick+0x37/0x50 [vhost_scsi]
vhost_run_work_list+0x8e/0xd0 [vhost]
vhost_task_fn+0xe1/0x210
ret_from_fork+0x348/0x540
</TASK>
RIP: 0010:0x4
CR2 = 0x4
RSP: 0018:ffffc90000dbf940 EFLAGS: 00010202
RAX: ffffffff82396810 RBX: ffff88811dc28b80 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000820 RDI: 0000000000000081
VHOST_F_LOG_ALL is a vhost-specific runtime feature and remains the only
exception.
Reject changes to any feature other than VHOST_F_LOG_ALL while the
endpoint is active. This preserves the existing runtime log toggle while
preventing feature-dependent command resources and data-path state from
becoming inconsistent. Userspace must clear the endpoint before changing
any other negotiated feature and set the endpoint up again afterward.
Fixes: bf2d650391 ("vhost-scsi: Allocate T10 PI structs only when enabled")
Signed-off-by: Jia Jia <physicalmtea@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260726144314.1652934-1-physicalmtea@gmail.com>
vhost-scsi translates guest response descriptors into userspace iovecs
when commands are submitted. Target-core completes those commands
asynchronously, so VHOST_SET_MEM_TABLE can replace the memory table while
an in-flight command still retains response iovecs translated through the
old table.
If the old mapping is reused after VHOST_SET_MEM_TABLE returns, command
completion can write the response to an unrelated userspace object.
Flush the vhost-scsi backend after vhost_dev_ioctl() handles a device
ioctl. This waits for in-flight commands that can still use the old
response iovecs before the ioctl returns.
Signed-off-by: Jia Jia <physicalmtea@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-ID: <20260724060919.1569170-1-physicalmtea@gmail.com>
vq->meta_iotlb[] caches the vhost_iotlb_map that backs each vring
metadata region, and iotlb_access_ok() returns early on a cache hit,
taking the hit as proof that the region has already been validated:
if (vhost_vq_meta_fetch(vq, addr, len, type))
return true;
The cache is reset on VHOST_IOTLB_UPDATE and VHOST_IOTLB_INVALIDATE, on
device IOTLB (re)initialisation and on vq reset, but not when
VHOST_SET_VRING_ADDR replaces vq->desc, vq->avail and vq->used, nor when
VHOST_SET_VRING_NUM changes the region sizes.
With a device IOTLB attached both ioctls are accepted while the vq is
live, and neither validates the addresses at ioctl time: vq_access_ok()
and vq_log_used_access_ok() return true early because the addresses are
GIOVAs, deferring validation to prefetch time. Once the cache has been
populated that deferred validation no longer runs -- vq_meta_prefetch()
hits the stale entry and returns true -- and vhost_vq_meta_fetch() keeps
translating through the old mapping as
map->addr + addr - map->start
for an address the mapping no longer covers. vhost_copy_to_user() and
vhost_copy_from_user() consume the result with __copy_to_user() and
__copy_from_user(), which do not check it either, so a subsequent used
ring update or descriptor fetch accesses memory outside the region the
IOTLB actually maps.
Reset the metadata cache whenever the vring is reconfigured, so the new
addresses are pushed back through iotlb_access_ok()'s slow path.
Fixes: f889491380 ("vhost: introduce O(1) vq metadata cache")
Cc: stable@vger.kernel.org
Assisted-by: tencentos-corvus-ai:kimi-k3
Signed-off-by: Jun Yang <junvyyang@tencent.com>
Message-ID: <20260803014823.68623-1-juny24602@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When T10 PI is negotiated, vhost-scsi splits protection bytes from
the data iterator before mapping the request scatterlists. A malformed
request can claim protection bytes that cover or exceed the full payload
length. The former leaves no data bytes to map, while the latter
underflows exp_data_len before advancing the iterator. Both cases can let
a zero data SGL count reach sg_alloc_table_chained(), which triggers
BUG_ON(!nents).
Reject protection lengths that cover or exceed the payload before
subtracting prot_bytes and advancing the iterator. Also propagate
negative errors from the protection SGL calculation before calling the
allocator, matching the data SGL path.
Fixes: bca939d5bc ("vhost-scsi: Dynamically allocate scatterlists")
Suggested-by: Jia Jia <physicalmtea@gmail.com>
Signed-off-by: Jia Jia <physicalmtea@gmail.com>
Assisted-by: OpenAI-Codex:GPT-5
Signed-off-by: Linfeng Sun <linfeng.sun.dev@gmail.com>
Message-ID: <20260727081841.923151-1-slf@hdu.edu.cn>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The sch_cake ACK filter parses packets to find the TCP header and filter
duplicated ACKs if the flow is backlogged. The parsing code contains a
WARN_ON(1) which can be triggered by a malformed IP header in certain
cases. Depending on the system configuration, this leads either to
either spamming dmesg with warnings, or a panic if panic_on_warn is set.
The code already correctly skips the offending packet in the branch that
triggers the warning, so the WARN_ON itself doesn't really serve any
purpose. So just drop it altogether to avoid the inconvenient side
effects.
Fixes: 8b7138814f ("sch_cake: Add optional ACK filter")
Reported-by: Zhiling Zou <zhilinz@nebusec.ai>
Reported-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://patch.msgid.link/20260729191417.45665-1-toke@toke.dk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__skb_udp_tunnel_segment() gets the UDP header before ensuring the
tunnel header is in the skb head. If the pull reallocates skb->head,
the saved UDP header pointer is no longer valid.
Get the UDP header after the pull to avoid a potential use-after-free.
Fixes: dbef491ebe ("udp: Use uh->len instead of skb->len to compute checksum in segmentation")
Signed-off-by: Xuanqiang Luo <luoxuanqiang@kylinos.cn>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://patch.msgid.link/20260730093554.68127-1-xuanqiang.luo@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by
a user-supplied length (udata_len) without checking a lower bound, then
set udata_offset to a fixed non-zero value and pass both to a reply
callback. The callback bounds-checks the copy with
if ((udata_len - udata_offset) < len)
Both fields are u32, so a udata_len smaller than udata_offset makes the
subtraction wrap and the check pass, and the following memcpy() writes
past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from
kzalloc(), which the existing NULL check does not catch.
Reject buffers smaller than udata_offset before allocating, so the
callback subtraction can no longer underflow.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Cc: stable@vger.kernel.org
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Hidayath Khan <hidayath@linux.ibm.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260730142216.218309-1-hidayath@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib_nlmsg_size() still estimates nexthop space as if every gateway is
encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an
IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA.
As a result, route notifications can allocate an skb that is too small.
fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the
WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With
panic_on_warn set, this becomes a kernel panic.
Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for
IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop
layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is
actually present.
Fixes: d15662682d ("ipv4: Allow ipv6 gateway with ipv4 routes")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zihan Xi <zihanx@nebusec.ai>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/6f53fa797fcaeb26966432ed7ae9bb87c4961f37.1785411220.git.zihanx@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_rx_splice() passes pages to splice_to_pipe() before taking the
references that cover the lifetime of each splice entry. In the
VM-backed RMB path, splice_to_pipe() may drop unqueued entries through
smc_rx_spd_release(), while queued entries are released later via the
pipe buffer callback.
The old post-splice accounting also derives the number of queued VM pages
from an offset mutated while building the descriptor, and a multi-page
splice pairs one sock_hold() with multiple sock_put() calls.
Take the page and socket references for every candidate entry before
splice_to_pipe(), and drop the matching private state, page reference,
and socket reference from smc_rx_spd_release() for entries that never
get queued. This fixes a refcount imbalance that can underflow page
refcounts and trigger a use-after-free.
Fixes: 9014db202c ("smc: add support for splice()")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Co-developed-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Xiao Liu <lx24@stu.ynu.edu.cn>
Signed-off-by: Daming Li <d4n.for.sec@gmail.com>
Signed-off-by: Ren Wei <enjou1224z@gmail.com>
Reviewed-by: Dust Li <dust.li@linux.alibaba.com>
Reviewed-by: Sidraya Jayagond <sidraya@linux.ibm.com>
Link: https://patch.msgid.link/20260730145552.360287-2-enjou1224z@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If allocation of auxr_dev fails during auxiliary device setup, the error
path calls auxiliary_device_uninit(), which eventually invokes
bnge_aux_dev_release().
The release callback unconditionally dereferences aux_priv->auxr_dev->pdev
to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated
on this failure path, the dereference results in a NULL pointer exception
Retrieve the parent bnge_dev from the auxiliary device's parent instead of
auxr_dev, and free auxr_dev only when it was successfully allocated. This
allows the release callback to correctly clean up partially initialized
auxiliary devices.
Fixes: 8ac050ec3b ("bng_en: Add RoCE aux device support")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Bhargava Marreddy <bhargava.marreddy@broadcom.com>
Link: https://patch.msgid.link/20260731192301.1427645-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In evdev_pass_values(), the input_event structure is allocated on the
kernel stack and populated field-by-field. However, it is never fully
initialized. On architectures where struct input_event contains explicit
or implicit padding (such as the 32-bit __pad field on SPARC64), these
padding bytes are left uninitialized.
When this event structure is subsequently passed to the client buffer
and later copied to userspace, the uninitialized padding bytes leak
kernel stack memory, potentially exposing sensitive information.
Similar issues exist in __evdev_queue_syn_dropped and __pass_event.
Fix this by explicitly zeroing the entire event structure with memset()
before populating its fields. This ensures all padding bytes are cleared
before the data crosses the security boundary.
Reported-by: sashiko-bot@kernel.org
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/ampGGKo4UMKru6f5@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
When the interface has NETIF_F_SG enabled and skb_linearize() fails in
ax88179_tx_fixup(), the function returns NULL without freeing the skb.
usbnet_start_xmit() treats a NULL return from tx_fixup() as a drop
(info->flags does not set FLAG_MULTI_PACKET for this driver), jumping
to the "drop" label where it does `if (skb) dev_kfree_skb_any(skb)`.
Because tx_fixup() returned NULL, the local skb variable in
usbnet_start_xmit() is NULL, so the original skb is never freed — a
memory leak on every TX frame whose linearization fails (i.e. under
memory pressure).
Free the skb before returning, matching the error handling already used
for the pskb_expand_head() failure path in the same function.
Fixes: 16b1c4e01c ("net: usb: ax88179_178a: add TSO feature")
Cc: stable@vger.kernel.org
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Link: https://patch.msgid.link/20260729030436.3420477-1-cong.yi@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stanislav Fomichev says:
====================
xsk: harden TX metadata validation against races
Cen Zhang reported a KASAN out-of-bounds read when AF_XDP is configured
with a TX metadata area smaller than struct xsk_tx_metadata. The metadata
is also shared with user space, so reading its flags more than once can
produce inconsistent validation and processing decisions.
Require enough space for the flags and one request field, validate the
launch-time field against the configured metadata length, and use one
snapshot of the flags while processing each request. Carry the validated
decision through completion handling so later user-space changes cannot
enable an unrequested completion timestamp.
Reported-by: AutonomousCodeSecurity@microsoft.com
Reported-by: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Link: https://lore.kernel.org/netdev/20260720155210.34229-1-blbllhy@gmail.com/
====================
Link: https://patch.msgid.link/20260727161959.885642-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The zero-copy path validates TX metadata while obtaining the descriptor
context, then reads it again later when preparing the hardware request.
User space can change the metadata between those operations and bypass the
original validation.
Validate the metadata in xsk_tx_metadata_request() and use the resulting
flags snapshot for every feature check. Read request fields once so all
zero-copy drivers process only values observed after successful
validation.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-7-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xsk_tx_metadata_request() must validate metadata with
xsk_buff_valid_tx_metadata(), which is defined in xdp_sock_drv.h. Move the
helper there before adding that dependency. All callers already include
the destination header, so this has no functional effect.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-6-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Launch-time metadata extends beyond the first 16 bytes of struct
xsk_tx_metadata. Reject the request when the registered metadata area does
not contain the complete field.
Snapshot the validated flags for the generic transmit path and use that
snapshot for request and completion processing, avoiding inconsistent
decisions if user space changes the flags concurrently.
Note that only xsk_skb_metadata is properly using the flags,
__xsk_buff_get_metadata ignores them. Next commits address that.
Fixes: ca4419f15a ("xsk: Add launch time hardware offload support to XDP Tx metadata")
Cc: Cen Zhang (Microsoft) <blbllhy@gmail.com>
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260727161959.885642-5-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
