The RS485 trigger hrtimers are embedded in the devm-managed port and can
fire after it is freed. The IRQ handler can arm a timer, so free the IRQ
first and then cancel both timers.
Complete the RS485 stop without arming a timer, and cancel the timers
in remove() for the suspend-then-unbind path, where shutdown is not
called.
This issue was found by an in-house static analysis tool.
Fixes: 2c1fd53af2 ("serial: amba-pl011: Fix RTS handling in RS485 mode")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-3-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The RS485 stop hrtimer is used both to drain the transmitter and to wait
out delay_rts_after_send. The callback cannot tell the two apart, so it
restarts the post-send delay on every expiry and the timer never stops.
Add a WAIT_AFTER_SEND_DELAY state so its expiry ends the stop sequence
instead of restarting the delay.
Fixes: 2c1fd53af2 ("serial: amba-pl011: Fix RTS handling in RS485 mode")
Cc: stable <stable@kernel.org>
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260731085915.326775-2-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
KDSKBMETA modifies keyboard meta mode but lacks the !perm check that all
other keyboard setter ioctls in vt_k_ioctl() enforce, allowing a process
to change meta mode on a non-controlling console without authorization.
Assisted-by: AISLE:Snapshot
Cc: stable <stable@kernel.org>
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Link: https://patch.msgid.link/20260731-tty-vt-stuff-v1-2-be99b9da8e30@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
kbd_keycode() reads vc->port.tty without acquiring a tty reference,
racing against con_shutdown() which clears port.tty under a different
lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference
for the duration the tty pointer is needed.
Assisted-by: AISLE:Snapshot
Signed-off-by: Joshua Rogers <linux@joshua.hu>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260731-tty-vt-stuff-v1-1-be99b9da8e30@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout
interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT
(0x0c) but LSR.DR is clear. A character timeout is only cleared by
reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is
set, so nothing ever clears the condition. The interrupt is
level-triggered and re-fires immediately, so on a single-core ARM926
the resulting interrupt storm livelocks the CPU.
It is reproducible when userspace repeatedly opens the front-panel port
(ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and
the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping
the soft-lockup detector in serial8250_handle_irq_locked().
LPC32xx has no dedicated 8250 glue driver, it's driven by the generic
8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up
in of_platform_serial_setup() the same way fsl8250_handle_irq is
installed. The handler follows dw8250_handle_irq(): on an RX timeout
with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR
read to clear the condition, then calls serial8250_handle_irq_locked().
No real received data is ever discarded, and it is a no-op on healthy
UARTs which never report a timeout with DR clear.
This is the same class of bug already worked around in other 8250 drivers;
see commit 424d79183a ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt")
which reports the identical iir=0xcc/lsr=0x60. See also
UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271.
Cc: stable <stable@kernel.org>
Assisted-by: Claude:Opus4.8
Signed-off-by: Ryan Wilbur <rwilbur633@gmail.com>
Link: https://patch.msgid.link/20260730193920.28954-1-rwilbur633@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This includes following USB4/Thunderbolt fixes:
- Correct DMA unmapping of USB4STREAM driver.
- Fix indexing of bandwidth groups.
- More bounds checking for DROM parsing.
- Fix ICM USB4 router operation messaging.
- Fix crash on ICM error path.
All these have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iQJUBAABCgA+FiEEVTdhRGBbNzLrSUBaAP2fSd+ZWKAFAmpwbsYgHG1pa2Eud2Vz
dGVyYmVyZ0BsaW51eC5pbnRlbC5jb20ACgkQAP2fSd+ZWKCoIBAAiGFiQm4tJfJJ
xJaYTF0F1Zk76JivRfdM/roVe0j/USMKrsHpPy4v5PoOHqonQm1nWXeOag8ok7sZ
alV7LLyZw0YVy7CiaDIMlmozm8x6sSqglHrDU+DWKPlzEjEVH0oLB/WS6l7ALQA3
K6ODuPW7SHSNFvH2p7+AOt5ARHzgNqw7hrveaJyzQELMyGCg77gq0ePkCUqvMKDs
KyHMjBpe00WK9VJDiW8rBLtkTM2H98DX4aaK2ECt0mwXLXhSTGPO7Uck2NVK3PnG
Oz3KntVXfR6tYoSA90ypvwQVitEzROWB1FFLqswtyMG6I/S6nX1ip8dg2U0iY+lI
jxBd538mymZNWpxqWZlSK1NXEernTePqPY70bM5dxsB/DSnCjhEmgO3RzlTjcsao
Trxinp9tKxoHKwVjlPUNxx41kRGgRMi5QErcQgKap0xn5wVLC2UxPx67AtLPPYp0
sMZEylcgeo5VC5j71ySfpUYlk8OkonK1KtHoaqh1vwazX7PAeKfcw5FfG07p9lgH
Ya64gdoNxU+inWYLyvj9VA6e5Lp17lZQfFvS4KkUZrsVe2LHqQMQy5DEtf+LmOBP
ZrewtFfGNv3ZLN5JtGT+p5yZxxtaNy+WzYK3FoZ1Pfkw79VmpuyzxjckMsa68Dcs
iIGhb2AswQn9Qh1JUf+XbZ9aHWB/M60=
=TCja
-----END PGP SIGNATURE-----
Merge tag 'thunderbolt-for-v7.2-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fixes for v7.2-rc7
This includes following USB4/Thunderbolt fixes:
- Correct DMA unmapping of USB4STREAM driver.
- Fix indexing of bandwidth groups.
- More bounds checking for DROM parsing.
- Fix ICM USB4 router operation messaging.
- Fix crash on ICM error path.
All these have been in linux-next with no reported issues.
* tag 'thunderbolt-for-v7.2-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Initialize ->domain_released completion before it is being used
thunderbolt: icm: Preserve USB4 proxy data-valid bit
thunderbolt: Bound the DROM dual link port number before indexing sw->ports
thunderbolt: Fix bandwidth group reservation indexing
thunderbolt: stream: Unmap buffers with mapped size
When creating a new vCPU, kvm_vm_ioctl_create_vcpu() will call
kvm_arch_vcpu_postcreate() after the file descriptor for the new vCPU
has been created. The new file descriptor has not been returned yet,
but a malicious userspace program could try to guess it.
If a malicious userspace program manages to start the newly created vCPU
before kvm_arch_vcpu_postcreate() is called, __vcpu_run() will try to
dereference vcpu->arch.gmap and trigger a NULL pointer dereference.
Fix this by adding a new field to struct kvm_vcpu_arch to keep track of
the initialization status of the vCPU. Refuse to run a vCPU that is not
fully initialized.
Fixes: dafd032a15 ("KVM: s390: move vcpu specific initalization to a later point")
Fixes: e38c884df9 ("KVM: s390: Switch to new gmap")
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20260803124040.126471-2-imbrenda@linux.ibm.com>
When working on a new features that reuses the existing pad in the
superblock, I noticed that mounting such a file system on an old kernel
logs a rather confusing warning:
XFS (vdc): Metadir superblock padding fields must be zero.
This is because we only validate the various feature fields in v5
superblocks after the common superblock validation helper is called.
Fix this by calling the feature validation first.
Fixes: eca383fcd6 ("xfs: refactor superblock verifiers")
Cc: <stable@vger.kernel.org> # v4.19
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
All other fields have comments describing them, add one for this field
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Allocating the new bio for a split from the same pool as the original
one can deadlock under memory pressure as the origin bio could be the
last one from the mempool.
Add a separate pool for splitting GC write bios to avoid this.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xlog_recover_dquot_commit_pass2() validates the recovered dquot with
xfs_dqblk_verify() and, on failure, sets error = -EFSCORRUPTED and jumps
to out_release. But out_release unconditionally returns 0, so the
corruption error is discarded: the caller xlog_recover_items_pass2()
sees success, log recovery proceeds as if the dquot were valid, and the
corrupt quota buffer can be written back to disk.
Fixes: 9c235dfc3d ("xfs: dquot recovery does not validate the recovered dquot")
Cc: stable@vger.kernel.org # v6.8
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xfs_dq_get_next_id() takes the quota inode ILOCK before calling
xfs_iread_extents(). If xfs_iread_extents() fails, the function returns
immediately without releasing the lock, leaking the quota inode ILOCK.
This can leave the quota inode locked and cause subsequent quota
operations to hang.
Fix this by jumping to a common unlock path on error instead of returning
directly.
Fixes: bda250dbaf ("xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent")
Cc: stable@vger.kernel.org # v4.12
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM complained that this function ignores runtime errors being
returned by xrep_iunlink_store_*. Rework the function signature so that
we can return runtime errors to abort the repair.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If we find a rogue free inode and decide to reinsert it into the
unlinked list, we need to set the prev pointer to NULLAGINO so that the
incore list gets updated.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
xrep_iunlink_resolve_bucket is supposed to reconstruct as much of the
incore prev and next unlinked list pointers based on what it finds on
disk and in memory before we move on to relinking the truly lost inodes
back into the unlinked list. However, it's still vulnerable to infinite
loops that come in via the next_unlinked pointers.
Fix this problem by remembering which inodes we've already seen and
checking new agino pointers against that. If a bit is already set,
either this is a loop or the inode has nonzero link count. We'll deal
with the second case in a subsequent patch.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
If an allocated inode shows up in the unlinked list, we need to get it
completely off the list. Set the corrected next/prev pointers such that
the inode will not look like it should be on an unlinked list at all.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM noticed that we neglect to check for xfarray_iter itself returning
errors when writing a new AGI. Fix that.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM points out that the only error that xrep_iunlink_mark_ondisk_rec
returns is ENOMEM, but we ignore that, and can end up writing a garbage
AGI based on incomplete information. We shouldn't do that, though here
we must be screen out EFSCORRUPTED/EFSBASDCRC because we haven't
checked the inobt yet.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM notices that xrep_iunlink_relink_prev has the comment "set the
forward pointer..." but then loads the value from the xfarray that
stores pointers to the previous inode in the unlinked list. That's
wrong, so fix the variable access.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM noticed a longstanding bug where xrep_iunlink_walk_ondisk_bucket
tries to walk ragi->sc->sa.agi_bp to rebuild the unlinked inode lists.
Unfortunately, it's possible for agi_bp to be null if the buffer
verifier fails, so we have to use ragi->agi_bp (which skips verifier
checks) instead.
Cc: stable@vger.kernel.org # v6.10
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM points out that online fsck can livelock if an unlinked inode list
contains a loop. Use a bitmap to detect cycles.
Cc: stable@vger.kernel.org # v4.15
Fixes: a12890aebb ("xfs: scrub the AGI")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In the next patch we're going to make this loop more exciting, so hoist
the code to a helper function to reduce clutter in the resulting code.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM noticed a potential UAF if the tempfile creation code fails after
it set sc->tempip. Fix that.
Cc: stable@vger.kernel.org # v6.10
Fixes: 84c14ee39d ("xfs: create temporary files and directories for online repair")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In xchk_nlinks_ilock_dir, take the IOLOCK before accessing internal
inode state to figure out if we need to take ILOCK shared or exclusive.
That way we can't race with directory updates. LOLLM pointed out that
the code was initially correct w.r.t. the IOLOCK, but then I broke it.
Cc: stable@vger.kernel.org # v6.18
Fixes: f477af0cfa ("xfs: fix locking in xchk_nlinks_collect_dir")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM noticed that xrep_xattr_rebuild_tree doesn't check for queued
parent pointer updates when it decides that it's going to zap the attr
fork. This is obviously incorrect, so fix that. We hold the IOLOCK and
the ILOCK of sc->ip at that point in time, so we can't race with any
/new/ operations.
Cc: stable@vger.kernel.org # v6.10
Fixes: e5d7ce0364 ("xfs: replay unlocked parent pointer updates that accrue during xattr repair")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM noticed that scrub sets the CORRUPT flag when xfs_parent_from_attr
thinks it's been given a corrupt parent pointer. This eliminates the
potential to repair the filesystem because that error code is bubbled up
the call stack. Fix this by collapsing them all to ECANCELED in
xchk_parent_pptr, which doesn't have that trait.
Cc: stable@vger.kernel.org # v6.10
Fixes: 0d29a20fbd ("xfs: scrub parent pointers")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
LOLLM notices that the dirtree scrubber can detect a directory that
refers to itself. In this case, it's not correct for the directory tree
repair code to try to iolock/ilock both sc->ip and dp, because they're
the same inode. Fix this by detecting that corner case and handling it
appropriately.
Cc: stable@vger.kernel.org # v6.10
Fixes: 3f31406aef ("xfs: fix corruptions in the directory tree")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
In the cntbt (free space by block count) btree, records are not supposed
to be in startblock order. Hence the mergeability check is pointless.
Remove it, since it does nothing, as LOLLM points out.
Cc: stable@vger.kernel.org # v6.4
Fixes: d5784ae827 ("xfs: flag free space btree records that could be merged")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Assisted-by: LOLLM # finding obvious bugs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
sashiko.dev noticed that these checks clear all the valid flags instead
of invalid. This probably was never hit as it only executed on invalid
flag presence.
Fixes: 2d295fe657 ("xfs: repair inode records")
Signed-off-by: Andrey Albershteyn <aalbersh@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
When exchanging two full-file ranges, xmi_can_exchange_reflink_flags()
can move the reflink inode flag from the file that currently has it to
the other file, as long as exactly one side is marked. This assumes
that the file contents, and therefore all shared extents, are exchanged.
That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set.
xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings
from file1, so an exchange can complete without moving every mapping
that the earlier flag-swap decision accounted for. In that case the
post-operation cleanup can clear the reflink flag from an inode that
still owns shared written extents. Later writes then take the
non-reflink write path and may update blocks that should still have
been protected by CoW, which shows up as data corruption between
reflink-related files.
Fix this by disabling the reflink flag exchange whenever
XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still
proceed; the conservative outcome is that both inodes keep the reflink
flag. The regular reflink flag cleanup path can drop the extra flag
later once the inode no longer has shared extents.
Reported-by: Lin Jiapeng (TencentOS Red Team) <jiapenglin@tencent.com>
Fixes: 966ceafc7a ("xfs: create deferred log items for file mapping exchanges")
Cc: stable@vger.kernel.org # v6.10
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Lin Jiapeng <jiapenglin@tencent.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
- mark gpio and pci reset as a GPIO pin functions in pinctrl-ipq8064
- fix audio_sec_mclk_in1/out1 pin numbers in pinctrl-ipq9650
-----BEGIN PGP SIGNATURE-----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=hvlx
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-qcom-fixes-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes
Qualcomm pin control fixes for v7.2-rc6
- mark gpio and pci reset as a GPIO pin functions in pinctrl-ipq8064
- fix audio_sec_mclk_in1/out1 pin numbers in pinctrl-ipq9650
Signed-off-by: Linus Walleij <linusw@kernel.org>
The UAC mixer of the Logitech PRO X 2 LIGHTSPEED has broken mixer
GET_CUR behavior but otherwise works fine.
Add a quirk table entry matching VID/PID=0x046d/0x0af7 and apply the
MIXER_GET_CUR_BROKEN quirk flag to make the mixer usable again.
Quirky device sample (after applying the quirk flag):
usb 3-2.1: New USB device found, idVendor=046d, idProduct=0af7, bcdDevice= 1.00
usb 3-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-2.1: Product: PRO X 2 LIGHTSPEED
usb 3-2.1: Manufacturer: Logitech
usb 3-2.1: SerialNumber: 0000000000000000
usb 3-2.1: 2:0: broken mixer GET_CUR (-18944/0/256 => -2662)
usb 3-2.1: 6:0: broken mixer GET_CUR (-18944/0/256 => 0)
Fixes: 86aa1ea1f1 ("ALSA: usb-audio: Do not expose sticky mixers")
Suggested-by: Brian van den Berg <faxuser@proton.me>
Reported-by: Brian van den Berg <faxuser@proton.me>
Link: https://lore.kernel.org/all/370007e6-b73b-4bfc-8410-a860781c7ad7@proton.me/
Signed-off-by: Rong Zhang <i@rong.moe>
Link: https://patch.msgid.link/20260731-uac-lg-pro-x-2-ls-v1-1-268eaefe66ab@rong.moe
Signed-off-by: Takashi Iwai <tiwai@suse.de>
tas2781_read_acpi() gets a reference to the matching ACPI device and then
looks up its first physical device node. After taking a reference to the
physical device, it immediately drops the ACPI device reference.
However, every later failure jumps to an error path that drops the ACPI
device reference a second time. This unbalances the reference count and
may prematurely release the ACPI device.
In addition, acpi_get_first_physical_node() may return NULL. Without a
check, the driver passes the NULL physical device to the property helper
calls and may dereference it.
Return -ENODEV when no physical device is associated with the ACPI node,
and remove the duplicate acpi_dev_put() from the common error path.
Fixes: bb5f86ea50 ("ALSA: hda/tas2781: Add tas2781 hda SPI driver")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/97EA8F29DA0D9AF7+20260731033554.949564-1-raoxu@uniontech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Insert a hyphen ('-') in 2 places to prevent kernel-doc warnings:
Warning: include/linux/fixp-arith.h:42 This comment starts with '/**',
but isn't a kernel-doc comment.
* __fixp_sin32() returns the sin of an angle in degrees
Warning: include/linux/fixp-arith.h:66 This comment starts with '/**',
but isn't a kernel-doc comment.
* fixp_sin32() returns the sin of an angle in degrees
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260731050625.455556-1-rdunlap@infradead.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
cifs_try_adding_channels() takes a temporary reference to an interface
before dropping iface_lock. If cifs_ses_add_channel() fails, it drops
that reference and then increments iface->weight_fulfilled.
A concurrent interface list refresh can remove the list reference while
channel creation is in progress. In that case, the failure-path
kref_put() releases the last reference and frees iface. Updating
weight_fulfilled afterward then accesses freed memory.
Increment weight_fulfilled before dropping the temporary reference,
keeping iface alive for the final access.
Fixes: 6aac002bcf ("cifs: failure to add channel on iface should bump up weight")
Cc: stable@vger.kernel.org
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Example:
1. mount -t cifs -o compress //localhost/test /mnt
2. mount | grep cifs
//localhost/test on /mnt type cifs (..., compress, ...)
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make finger2 (and also finger1) unsigned, so that if the finger index in
the packet is 0 then subtracting 1 creates an array index which overflows
above the existing check for FOC_MAX_FINGERS, as the existing comment says
it should, instead of writing to state->fingers[-1].
Fixes: 05be1d079e ("Input: psmouse - support for the FocalTech PS/2 protocol extensions")
Signed-off-by: Richard Davies <richard@arachsys.com>
Link: https://patch.msgid.link/20260701190932.14960-1-richard@arachsys.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
reqsk_queue_hash_req() publishes a TCP_NEW_SYN_RECV request_sock onto
the ehash chain, drops the bucket lock, and only afterwards sets
rsk_refcnt to 3.
Lockless readers such as __inet_lookup_established() handle this with
refcount_inc_not_zero(), but bpf_iter_tcp_established_batch() uses plain
sock_hold() while holding the bucket lock, on the assumption that the
lock guarantees sk_refcnt > 0. That assumption does not hold for
request_sock:
CPU 0 CPU 1
----- -----
tcp_conn_request()
reqsk_queue_hash_req()
inet_ehash_insert(req)
spin_lock(bucket)
__sk_nulls_add_node_rcu(req) // rsk_refcnt == 0
spin_unlock(bucket)
bpf_iter_tcp_established_batch()
spin_lock(bucket)
sock_hold(req) <-- addition on 0
spin_unlock(bucket)
refcount_set(&req->rsk_refcnt, 3) // clobbers saturated value
which surfaces as:
refcount_t: addition on 0; use-after-free.
WARNING: lib/refcount.c:25 at refcount_warn_saturate+0x48/0x90, CPU#1
Call Trace:
bpf_iter_tcp_established_batch+0x14e/0x170
bpf_iter_tcp_batch+0x53/0x200
bpf_iter_tcp_seq_next+0x27/0x70
bpf_seq_read+0x107/0x410
vfs_read+0xb9/0x380
The iterator's stolen reference is lost when the publishing CPU's
refcount_set() overwrites the count, leaving the socket one reference
short. When the last legitimate owner drops its reference the reqsk is
freed while still reachable, leading to use-after-free.
This reproduces in seconds with tcp_syncookies=0, a handful of threads
doing connect()/close() to a local listener while others read an
iter/tcp link in a tight loop.
Use refcount_inc_not_zero() and skip the socket on failure. A skipped
socket is still part of the bucket, so keep counting it in expected.
The reallocations are sized from expected, and a request sock whose
refcount gets published while the lock is held across the last realloc
must already have room.
A skipped socket is counted in expected but never batched, so end_sk
can be short of expected on a batch that is actually complete. Decide
completeness by whether the walk left any socket behind instead. The
WARN after the locked realloc checks the same, replacing an
end_sk == expected check that could not hold on that path since
commit cdec67a489 ("bpf: tcp: Make sure iter->batch always
contains a full bucket snapshot").
If every matching socket in a bucket is mid-init (refcount 0), end_sk
stays 0. Advance to the next bucket rather than returning a batch entry
that was never filled this round.
Fixes: 04c7820b77 ("bpf: tcp: Bpf iter batching and lock_sock")
Assisted-by: Claude:unspecified
Signed-off-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://lore.kernel.org/bpf/20260730-bpf-iter-tcp-refcnt-v3-1-754b9c8a6717@linux.dev
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
The internal keyboard on the HONOR ZQC-P (HONOR MagicBook Pro 14 2026)
does not work after boot.
Using the kernel command line 'i8042.dumbkbd=1' makes the keyboard
functional, but the CapsLock LED does not work. Adding the
'atkbd_deactivate_fixup' quirk fixes the keyboard and CapsLock LED
natively without requiring boot parameters.
DMI: HONOR ZQC-P/ZQC-P-PCB, BIOS 1.09 03/19/2026
Fixes: 9cf6e24c9f ("Input: atkbd - do not skip atkbd_deactivate() when skipping ATKBD_CMD_GETID")
Signed-off-by: Donglin Lyu <donglin_lyu@outlook.com>
Tested-by: Ruslan Shevchenko <adefka@gmail.com>
Link: https://patch.msgid.link/20260801151115.52709-1-donglin_lyu@outlook.com
Cc: stable@vger.kernel.org
[dtor: keep all HONOR entries together]
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The internal keyboard of the Xiaomi Book Pro 14 does not work unless
atkbd skips deactivating it at the end of atkbd_probe().
Using 'i8042.dumbkbd=1' also makes the keyboard work, but then the driver
never writes to the keyboard at all, so the Caps Lock LED is lost. The
atkbd_deactivate_fixup quirk fixes both without a boot parameter.
DMI: XIAOMI Xiaomi Book Pro 14/TM2424, BIOS XMAPT4B0P0909 05/06/2026
Signed-off-by: Zhefu Zhang <a723356@gmail.com>
Reviewed-by: Andrew Zhou <zhoulol888@gmail.com>
Link: https://patch.msgid.link/20260802031559.19701-1-a723356@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
V3D exposes several independent hardware queues (BIN, RENDER, TFU and
CSD) but has only a single, global reset. A timeout on any one queue
therefore has to stop, reset and restart the schedulers of every other
queue as well. That makes concurrent timeout handlers unsafe.
`reset_lock` was never able to make them safe, as a driver-side lock can
only cover the driver's &drm_sched_backend_ops.timedout_job callback.
The scheduler handles the timed out job and its pending list around that
callback, outside of the driver's control, so a global reset triggered
by one queue can still interfere with another queue that is in the
middle of handling a timeout of its own.
Consequently, if a reset happens in the CSD queue while a CL-intensive
application is running, the global reset stops and restarts the CL
queue's scheduler while that queue is handling a timeout of its own. As
drm_sched_stop() and drm_sched_start() subtract and add the credits of
every job sitting on the pending list of the scheduler they are called
on, and as the CL queue's handler concurrently takes its job off that
same list and puts it back, the stop and the start no longer see the
same set of jobs. The CL queue is left with more credits in flight than
its limit:
[ 327.302739] ------------[ cut here ]------------
[ 327.302744] WARNING: CPU: 2 PID: 43 at drivers/gpu/drm/scheduler/sched_main.c:102 drm_sched_run_job_work+0x238/0x4d0 [gpu_sched]
[ 327.302884] CPU: 2 UID: 0 PID: 43 Comm: kworker/u16:1 Not tainted 6.18.39-v8-16k+ #3 PREEMPT
[ 327.302889] Hardware name: Raspberry Pi 5 Model B Rev 1.0 (DT)
[ 327.302893] Workqueue: v3d_bin drm_sched_run_job_work [gpu_sched]
[ 327.302984] Call trace:
[ 327.302987] drm_sched_run_job_work+0x238/0x4d0 [gpu_sched] (P)
[ 327.302997] process_scheduled_works+0x180/0x3d0
[ 327.303010] worker_thread+0x268/0x3e8
[ 327.303016] kthread+0x140/0x250
[ 327.303022] ret_from_fork+0x10/0x20
[ 327.303031] ---[ end trace 0000000000000000 ]---
From that point on, the credit count of the CL queue is broken, causing
a complete GPU hang and UI freeze.
The DRM scheduler already provides a mechanism to serialize the timeout
handlers of different schedulers: an ordered workqueue passed as
drm_sched_init()'s @timeout_wq parameter. By default, each scheduler
queues its timeout work on the system workqueue, which runs the handlers
concurrently. Give all of the queues a shared ordered workqueue instead,
as recommended by the DRM scheduler documentation for hardware that has
distinct queues but resets globally.
Cc: stable@vger.kernel.org # 6.15
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260728-v3d-order-global-reset-v1-1-e47be838158d@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
io.latency is documented only in terms of average latency and the avg_lat
stat, which matches rotational devices. On non-rotational devices a group
misses its target once enough of the IOs in the window individually exceed
it, and io.stat reports missed/total rather than avg_lat/win.
Describe both cases: how a miss is detected, note that the avg_lat tuning
guidance is rotational-only, and update the io.stat field list (mark
avg_lat/win as rotational-only, document missed/total).
Acked-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
- Fix swiotlb initialization on systems where DRAM is located above
4GiB (such as the Tenstorrent Blackhole cards)
- Fix an out-of-bounds access in the memory hot-remove code that can
occur on Sv39 and Sv48 systems
- Avoid oopsing during boot if the SBI component of the unaligned
access performance checking code loses a race against __init
function freeing
- Avoid attempting to install the debug-enabled vDSO when it shouldn't
be built due to !CONFIG_MMU
- Avoid some sparse warnings by adding missing __iomem notations
in get_cycles{,_hi}()
- Drop an unnecessary runtime warning in the SiFive errata handler
-----BEGIN PGP SIGNATURE-----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=gw8o
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Fix swiotlb initialization on systems where DRAM is located above
4GiB (such as the Tenstorrent Blackhole cards)
- Fix an out-of-bounds access in the memory hot-remove code that can
occur on Sv39 and Sv48 systems
- Avoid oopsing during boot if the SBI component of the unaligned
access performance checking code loses a race against __init function
freeing
- Avoid attempting to install the debug-enabled vDSO when it shouldn't
be built due to !CONFIG_MMU
- Avoid some sparse warnings by adding missing __iomem notations in
get_cycles{,_hi}()
- Drop an unnecessary runtime warning in the SiFive errata handler
* tag 'riscv-for-linus-7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: vdso: Only try to install vDSO when present
riscv: mm: Fix out-of-bounds page-table walk during memory hot-remove
riscv: drop __init from vec_check_unaligned_access_speed_all_cpus
riscv: mm: fix SWIOTLB initialization for systems with DRAM above 4GB
riscv/sifive: remove warning in errata
riscv: time: Add missing __iomem in get_cycles() and get_cycles_hi()
- Fix PCI MMIO write syscall falsely reporting success for mappings not
valid for MMIO when MIO is unavailable by returning -EFAULT
- Fix CPRB parameter buffer overflows in zcrypt CCA AES cipher and ECC
private key conversion by rejecting oversized key tokens
- Fix buffer overreads and length underflow in pkey and zcrypt CCA token
validation by checking length fields against actual buffer sizes
- Fix out of bounds permission bitmap access in zcrypt EP11 admin CPRB
filtering on custom device nodes by using AP_DOMAINS as the limit
- Fix speculative permission bitmap reads in zcrypt CCA and EP11 admin
CPRB handling by sanitizing user controlled domain indexes
- Fix sensitive key material left in zcrypt CCA clear key import buffers
by scrubbing CPRB and temporary buffers after use
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmpvT7gACgkQjYWKoQLX
FBg7qAf/eDHPqcayM4/Rasf3P+KVoIquyl0BjBI41Lf348em9ffLdvGI+PmSgo3s
CVOPmsQY1zn4UvWrU3Wn0/Kmgo7U4xv6ODDUbvuTbjr7gUigMOYPoH3zShQJW8dY
bJ5UnbtYC5ZMpnkEFQi4F1xNd3IoOFQLnbUPaFd+5S+slUJygGNh4XjEBEUfo3yS
dyly7GWgml2obf2R4IfRG1ItP4hY8OWo0K9XrDJomh+s5WfkFy5QMlL6uEsuXzcR
iqEPTaHblvz5FhEozZmmFppM3GVclyLouxZTHYHP32OaoLOIgF9NNW4WUmXodyF/
efMV21LmtCjMcLrM4LQ1PohTtXgG+A==
=U3To
-----END PGP SIGNATURE-----
Merge tag 's390-7.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Fix PCI MMIO write syscall falsely reporting success for mappings not
valid for MMIO when MIO is unavailable by returning -EFAULT
- Fix CPRB parameter buffer overflows in zcrypt CCA AES cipher and ECC
private key conversion by rejecting oversized key tokens
- Fix buffer overreads and length underflow in pkey and zcrypt CCA
token validation by checking length fields against actual buffer
sizes
- Fix out of bounds permission bitmap access in zcrypt EP11 admin CPRB
filtering on custom device nodes by using AP_DOMAINS as the limit
- Fix speculative permission bitmap reads in zcrypt CCA and EP11 admin
CPRB handling by sanitizing user controlled domain indexes
- Fix sensitive key material left in zcrypt CCA clear key import
buffers by scrubbing CPRB and temporary buffers after use
* tag 's390-7.2-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix missing mem scrub at clear key import in cca_clr2cipherkey()
s390/zcrypt: Close speculative mem read possibility
s390/zcrypt: Fix wrong domain value verification with EP11 CPRBs
s390/zcrypt: Fix buffer over-read in cca_cipher2protkey
s390/zcrypt: Validate length for CCA ECC private key requests
s390/zcrypt: Validate length for CCA AES cipher key requests
s390/pci: Fix s390_pci_mmio_write syscall error return without MIO
- Fix the boot-time memcmp() asm implementation's constraints
and optimization properties (Mauricio Faria de Oliveira)
- Move the 0xd0...0xd7 AMD Zen5 model range from the Zen6
range where it mistakenly ended up (Pratik Vishwakarma)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EHql
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix the boot-time memcmp() asm implementation's constraints
and optimization properties (Mauricio Faria de Oliveira)
- Move the 0xd0...0xd7 AMD Zen5 model range from the Zen6
range where it mistakenly ended up (Pratik Vishwakarma)
* tag 'x86-urgent-2026-08-02' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Carve out a Zen5 models range
x86/boot: Add volatile, clobbers and zero-length test in memcmp()
Please consider pulling these changes from the signed vfs-7.2-rc6.fixes tag.
Thanks!
Christian
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCam8K1wAKCRCRxhvAZXjc
oicvAP9SaD+BOfpqRkICUIrZ/Lz+x3bIn1a0/yjgDQlPE1xJmQD+JCqIVnvUDN2U
m89mFy/4Mq9FYnuHZ6LWMAeYYIx3OQM=
=+294
-----END PGP SIGNATURE-----
Merge tag 'vfs-7.2-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"binfmt_misc:
- Don't let an 'F' entry pin its own instance.
An entry registered with 'F' opens its interpreter at registration
time and holds that file until the entry is freed, so an entry
nobody removes by hand is only closed once the binfmt_misc
superblock is shut down.
If the interpreter lives on a mount that keeps that superblock
alive the two pin each other and the file is never closed. That's
reachable by pointing the interpreter at the instance itself or by
using the instance as an overlayfs lower layer, and once the mount
namespace is gone there's nothing left to unregister through
either.
- Restore write access when removing an entry.
Registering with the MISC_FMT_OPEN_FILE flag opens the interpreter
via open_exec() which denies write access for as long as the entry
exists, but removal only did filp_close() and never restored it.
The inode's i_writecount stayed permanently negative and opening
the interpreter for writing kept failing with ETXTBSY long after
the entry was gone.
- Use exe_file_deny_write_access() for the interpreter clone so both
sides base their decision on the same mode.
- Reject a flag character as the field delimiter. create_entry() pads
the buffer with the delimiter so the field parsers terminate even
on a truncated string, but check_special_flags() consumes flag
characters instead of scanning for the delimiter.
If the delimiter is itself a flag character the padding stops
acting as a terminator and the scan keeps reading past the end of
the allocation. Such a registration was always rejected, just only
after the out of bounds read has already happened.
- Don't leak the user namespace when the mount fails.
bm_get_tree() hands its reference to get_tree_keyed() and sget_fc()
moves it into sb->s_fs_info, but generic_shutdown_super() only
calls ->put_super() from inside the if (sb->s_root) branch and
bm_fill_super() can fail before either s_root or s_op is in place.
Drop the reference in ->kill_sb() instead, which runs
unconditionally.
netfs:
- Clear PG_private_2 on a copy-to-cache append failure.
- Handle a rolling buffer allocation failure in single-object
writeback and drop the extra folio reference
netfs_write_folio_single() took before the append.
- Release the previously batched readahead folios when
rolling_buffer_load_from_ra() fails in
netfs_prepare_read_iterator()
- Fix the folio_queue ENOMEM in writeback by adding a mempool and
passing gfp flags into the rolling buffer helpers.
iomap:
- Add a separate bio_set for iomap_split_ioend(). It can split bios
that already come from iomap_ioend_bioset and deadlock once that
bioset is exhausted.
afs:
- Set call->async for an asynchronous afs_fs_fetch_data() the way
afs_fs_fetch_data64() already does.
- Subtract subreq->transferred from subreq->len in
afs_fs_fetch_data() rather than adding it.
- Fix a UAF when sending a message"
* tag 'vfs-7.2-rc6.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iomap: add a separate bio_set for iomap_split_ioend
binfmt_misc: don't leak the user namespace when the mount fails
binfmt_misc: reject a flag character as the field delimiter
binfmt_misc: use exe_file_deny_write_access() for the interpreter clone
binfmt_misc: restore write access when removing an entry
binfmt_misc: don't let an 'F' entry pin its own instance
netfs: Fix folio_queue ENOMEM in writeback by adding a mempool
netfs: release readahead folios on iterator preparation failure
netfs: handle single writeback rolling buffer allocation failure
netfs: clear PG_private_2 on copy-to-cache append failure
afs: Fix UAF when sending a message
afs: Fix afs_fs_fetch_data() to subtract transferred from len
afs: Fix afs_fs_fetch_data() to set call->async
