Fixes the following Coccinelle/coccicheck warning reported by
string_choices.cocci:
opportunity for str_plural(zgroup->g_nr_zones)
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[BUG]
There is a recent report that when memory pressure is high (including
cached pages), btrfs can spend most of its time on memory allocation in
btrfs_alloc_page_array() for compressed read/write.
[CAUSE]
For btrfs_alloc_page_array() we always go alloc_pages_bulk_array(), and
even if the bulk allocation failed (fell back to single page
allocation) we still retry but with extra memalloc_retry_wait().
If the bulk alloc only returned one page a time, we would spend a lot of
time on the retry wait.
The behavior was introduced in commit 395cb57e85 ("btrfs: wait between
incomplete batch memory allocations").
[FIX]
Although the commit mentioned that other filesystems do the wait, it's
not the case at least nowadays.
All the mainlined filesystems only call memalloc_retry_wait() if they
failed to allocate any page (not only for bulk allocation).
If there is any progress, they won't call memalloc_retry_wait() at all.
For example, xfs_buf_alloc_pages() would only call memalloc_retry_wait()
if there is no allocation progress at all, and the call is not for
metadata readahead.
So I don't believe we should call memalloc_retry_wait() unconditionally
for short allocation.
Call memalloc_retry_wait() if it fails to allocate any page for tree
block allocation (which goes with __GFP_NOFAIL and may not need the
special handling anyway), and reduce the latency for
btrfs_alloc_page_array().
Reported-by: Julian Taylor <julian.taylor@1und1.de>
Tested-by: Julian Taylor <julian.taylor@1und1.de>
Link: https://lore.kernel.org/all/8966c095-cbe7-4d22-9784-a647d1bf27c3@1und1.de/
Fixes: 395cb57e85 ("btrfs: wait between incomplete batch memory allocations")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add an ASSERT to catch a faulty delayed reference item resulting from
prematurely cleared extent buffer.
Also, add a WARN to detect if we try to dirty a ZEROOUT buffer again, which
is suspicious as its update will be lost.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Btrfs clears the content of an extent buffer marked as
EXTENT_BUFFER_ZONED_ZEROOUT before the bio submission. This mechanism is
introduced to prevent a write hole of an extent buffer, which is once
allocated, marked dirty, but turns out unnecessary and cleaned up within
one transaction operation.
Currently, btrfs_clear_buffer_dirty() marks the extent buffer as
EXTENT_BUFFER_ZONED_ZEROOUT, and skips the entry function. If this call
happens while the buffer is under IO (with the WRITEBACK flag set,
without the DIRTY flag), we can add the ZEROOUT flag and clear the
buffer's content just before a bio submission. As a result:
1) it can lead to adding faulty delayed reference item which leads to a
FS corrupted (EUCLEAN) error, and
2) it writes out cleared tree node on disk
The former issue is previously discussed in [1]. The corruption happens
when it runs a delayed reference update. So, on-disk data is safe.
[1] https://lore.kernel.org/linux-btrfs/3f4f2a0ff1a6c818050434288925bdcf3cd719e5.1709124777.git.naohiro.aota@wdc.com/
The latter one can reach on-disk data. But, as that node is already
processed by btrfs_clear_buffer_dirty(), that will be invalidated in the
next transaction commit anyway. So, the chance of hitting the corruption
is relatively small.
Anyway, we should skip flagging ZEROOUT on a non-DIRTY extent buffer, to
keep the content under IO intact.
Fixes: aa6313e6ff ("btrfs: zoned: don't clear dirty flag of extent buffer")
CC: stable@vger.kernel.org # 6.8
Link: https://lore.kernel.org/linux-btrfs/oadvdekkturysgfgi4qzuemd57zudeasynswurjxw3ocdfsef6@sjyufeugh63f/
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
These two patches are fixes that the feature depends on, but they also
fix generic issues. So I'm picking them up for fixes as well as
for-next.
* commit 'aea702dde7e9876fb00571a2602f25130847bf0f':
riscv: Fix loading 64-bit NOMMU kernels past the start of RAM
riscv: Fix TASK_SIZE on 64-bit NOMMU
Link: https://lore.kernel.org/r/20240227003630.3634533-1-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
commit 3335068f87 ("riscv: Use PUD/P4D/PGD pages for the linear
mapping") added logic to allow using RAM below the kernel load address.
However, this does not work for NOMMU, where PAGE_OFFSET is fixed to the
kernel load address. Since that range of memory corresponds to PFNs
below ARCH_PFN_OFFSET, mm initialization runs off the beginning of
mem_map and corrupts adjacent kernel memory. Fix this by restoring the
previous behavior for NOMMU kernels.
Fixes: 3335068f87 ("riscv: Use PUD/P4D/PGD pages for the linear mapping")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On NOMMU, userspace memory can come from anywhere in physical RAM. The
current definition of TASK_SIZE is wrong if any RAM exists above 4G,
causing spurious failures in the userspace access routines.
Fixes: 6bd33e1ece ("riscv: add nommu support")
Fixes: c3f896dcf1 ("mm: switch the test_vmalloc module to use __vmalloc_node")
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Bo Gan <ganboing@gmail.com>
Link: https://lore.kernel.org/r/20240227003630.3634533-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Running turbostat on a 16 socket HPE Scale-up Compute 3200 (SapphireRapids) fails with:
turbostat: /sys/devices/system/cpu/intel_uncore_frequency/package_010_die_00/current_freq_khz: open failed: No such file or directory
We observe the sysfs uncore frequency directories named:
...
package_09_die_00/
package_10_die_00/
package_11_die_00/
...
package_15_die_00/
The culprit is an incorrect sprintf format string "package_0%d_die_0%d" used
with each instance of reading uncore frequency files. uncore-frequency-common.c
creates the sysfs directory with the format "package_%02d_die_%02d". Once the
package value reaches double digits, the formats diverge.
Change each instance of "package_0%d_die_0%d" to "package_%02d_die_%02d".
[lenb: deleted the probe part of this patch, as it was already fixed]
Signed-off-by: Justin Ernst <justin.ernst@hpe.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics sysfs snapshots share similar logic.
Combine them into one function to avoid code duplication.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Graphics drivers (i915/Xe) have different sysfs knobs on different
platforms, and it is possible that different sysfs knobs fit into the
same turbostat columns.
Instead of specifying different sysfs knobs every time, detect them
once and cache the path for future use.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Some of the future Intel platforms will require reading the RAPL
counters via perf and not MSR. On current platforms we can still read
them using both ways.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Enable DMA mappings in vmwgfx after TTM has been fixed in commit
3bf3710e37 ("drm/ttm: Add a generic TTM memcpy move for page-based iomem")
This enables full guest-backed memory support and in particular allows
usage of screen targets as the presentation mechanism.
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Reported-by: Ye Li <ye.li@broadcom.com>
Tested-by: Ye Li <ye.li@broadcom.com>
Fixes: 3b0d6458c7 ("drm/vmwgfx: Refuse DMA operation when SEV encryption is active")
Cc: Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Martin Krastev <martin.krastev@broadcom.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408022802.358641-1-zack.rusin@broadcom.com
Stop compiling vmenter.S with OBJECT_FILES_NON_STANDARD to skip objtool's
stack validation now that __svm_vcpu_run() and __svm_sev_es_vcpu_run()
create stack frames (though the former's effectiveness is dubious).
Note, due to a quirk in how OBJECT_FILES_NON_STANDARD was handled by the
build system prior to commit bf48d9b756 ("kbuild: change tool coverage
variables to take the path relative to $(obj)"), vmx/vmenter.S got lumped
in with svm/vmenter.S. __vmx_vcpu_run() already plays nice with frame
pointers, i.e. it was collateral damage when commit 7f4b5cde24 ("kvm:
Disable objtool frame pointer checking for vmenter.S") added the
OBJECT_FILES_NON_STANDARD hack-a-fix.
Link: https://lore.kernel.org/all/20240217055504.2059803-1-masahiroy@kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Now that KVM uses the host save area to context switch RBP, i.e.
preserves RBP for the entirety of __svm_sev_es_vcpu_run(), create a stack
frame using the standared FRAME_{BEGIN,END} macros.
Note, __svm_sev_es_vcpu_run() is subtly not a leaf function as it can call
into ibpb_feature() via UNTRAIN_RET_VM.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the host save area to preserve volatile registers that are used in
__svm_sev_es_vcpu_run() to access function parameters after #VMEXIT.
Like saving/restoring non-volatile registers, there's no reason not to
take advantage of hardware restoring registers on #VMEXIT, as doing so
shaves a few instructions and the save area is going to be accessed no
matter what.
Converting all register save/restore code to use the host save area also
make it easier to follow the SEV-ES VMRUN flow in its entirety, as
opposed to having a mix of stack-based versus host save area save/restore.
Add a parameter to RESTORE_HOST_SPEC_CTRL_BODY so that the SEV-ES path
doesn't need to write @spec_ctrl_intercepted to memory just to play nice
with the common macro.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the host save area to save/restore non-volatile (callee-saved)
registers in __svm_sev_es_vcpu_run() to take advantage of hardware loading
all registers from the save area on #VMEXIT. KVM still needs to save the
registers it wants restored, but the loads are handled automatically by
hardware.
Aside from less assembly code, letting hardware do the restoration means
stack frames are preserved for the entirety of __svm_sev_es_vcpu_run().
Opportunistically add a comment to call out why @svm needs to be saved
across VMRUN->#VMEXIT, as it's not easy to decipher that from the macro
hell.
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Michael Roth <michael.roth@amd.com>
Cc: Alexey Kardashevskiy <aik@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
POP @spec_ctrl_intercepted into RAX instead of RBX when discarding it from
the stack so that __svm_sev_es_vcpu_run() doesn't modify any non-volatile
registers. __svm_sev_es_vcpu_run() doesn't return a value, and RAX is
already are clobbered multiple times in the #VMEXIT path.
This will allowing using the host save area to save/restore non-volatile
registers in __svm_sev_es_vcpu_run().
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop 32-bit "support" from __svm_sev_es_vcpu_run(), as SEV/SEV-ES firmly
64-bit only. The "support" was purely the result of bad copy+paste from
__svm_vcpu_run(), which in turn was slightly less bad copy+paste from
__vmx_vcpu_run().
Opportunistically convert to unadulterated register accesses so that it's
easier (but still not easy) to follow which registers hold what arguments,
and when.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Compile (and link) __svm_sev_es_vcpu_run() if and only if SEV support is
actually enabled. This will allow dropping non-existent 32-bit "support"
from __svm_sev_es_vcpu_run() without causing undue confusion.
Intentionally don't provide a stub (but keep the declaration), as any sane
compiler, even with things like KASAN enabled, should eliminate the call
to __svm_sev_es_vcpu_run() since sev_es_guest() unconditionally returns
"false" if CONFIG_KVM_AMD_SEV=n.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Unconditionally create a stack frame in __svm_vcpu_run() to play nice with
unwinding via frame pointers, at least until the point where RBP is loaded
with the guest's value. Don't bother conditioning the code on
CONFIG_FRAME_POINTER=y, as RBP needs to be saved and restored anyways (due
to it being clobbered with the guest's value); omitting the "MOV RSP, RBP"
is not worth the extra #ifdef.
Creating a stack frame will allow removing the OBJECT_FILES_NON_STANDARD
tag from vmenter.S once __svm_sev_es_vcpu_run() is fixed to not stomp all
over RBP for no reason.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240223204233.3337324-2-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Remove KVM's unnecessary zeroing of memory when allocating the pages array
in sev_pin_memory() via __vmalloc(), as the array is only used to hold
kernel pointers. The kmalloc() path for "small" regions doesn't zero the
array, and if KVM leaks state and/or accesses uninitialized data, then the
kernel has bigger problems.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c7619a3d3cbb36463531a7c73ccbde9db587986c.1710004509.git.christophe.jaillet@wanadoo.fr
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
nouveau:
- regression fix for GSP display enable.
-----BEGIN PGP SIGNATURE-----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=pPLP
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2024-04-09' of https://gitlab.freedesktop.org/drm/kernel
Pull drm nouveau fix from Dave Airlie:
"A previous fix to nouveau devinit on the GSP paths fixed the Turing
but broke Ampere, I did some more digging and found the proper fix.
Sending it early as I want to make sure it makes the next 6.8 stable
kernels to fix the regression.
Regular fixes will be at end of week as usual.
nouveau:
- regression fix for GSP display enable"
* tag 'drm-fixes-2024-04-09' of https://gitlab.freedesktop.org/drm/kernel:
nouveau: fix devinit paths to only handle display on GSP.
check_timer_distribution() runs ten threads in a busy loop and tries to
test that the kernel distributes a process posix CPU timer signal to every
thread over time.
There is not guarantee that this is true even after commit bcb7ee7902
("posix-timers: Prefer delivery of signals to the current thread") because
that commit only avoids waking up the sleeping process leader thread, but
that has nothing to do with the actual signal delivery.
As the signal is process wide the first thread which observes sigpending
and wins the race to lock sighand will deliver the signal. Testing shows
that this hangs on a regular base because some threads never win the race.
The comment "This primarily tests that the kernel does not favour any one."
is wrong. The kernel does favour a thread which hits the timer interrupt
when CLOCK_PROCESS_CPUTIME_ID expires.
Rewrite the test so it only checks that the group leader sleeping in join()
never receives SIGALRM and the thread which burns CPU cycles receives all
signals.
In older kernels which do not have commit bcb7ee7902 ("posix-timers:
Prefer delivery of signals to the current thread") the test-case fails
immediately, the very 1st tick wakes the leader up. Otherwise it quickly
succeeds after 100 ticks.
CI testing wants to use newer selftest versions on stable kernels. In this
case the test is guaranteed to fail.
So check in the failure case whether the kernel version is less than v6.3
and skip the test result in that case.
[ tglx: Massaged change log, renamed the version check helper ]
Fixes: e797203fb3 ("selftests/timers/posix_timers: Test delivery of signals across threads")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240409133802.GD29396@redhat.com
Add an optional gpio property to control external CBJ circuits
to avoid some electric noise caused by sleeve/ring2 contacts floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The codec leaves tie combo jack's sleeve/ring2 to floating status
default. It would cause electric noise while connecting the active
speaker jack during boot or shutdown.
This patch requests a gpio to control the additional jack circuit
to tie the contacts to the ground or floating.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://msgid.link/r/20240408091057.14165-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds microphone detection for the Acer 315-24p, after which a microphone appears on the device and starts working
Signed-off-by: end.to.start <end.to.start@mail.ru>
Link: https://msgid.link/r/20240408152454.45532-1-end.to.start@mail.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
The ChipID bytes are read in inverse order: invert the ChipID value
defined as IT5205FN_CHIP_ID and used for validating the same.
Fixes: 41fe9ea169 ("usb: typec: mux: Add ITE IT5205 Alternate Mode Passive MUX driver")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240409113646.305105-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When sending a patch to (among others) Li Yang the nxp MTA replied that
the address doesn't exist and so the mail couldn't be delivered. The
error code was 550, so at least technically that's not a temporal issue.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20240405072042.697182-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The MT6360 regulator binding, the example in the MT6360 mfd binding, and
the devicetree users of those bindings are rightfully declaring MT6360
regulator subnodes with non-capital names, and luckily without using the
deprecated regulator-compatible property.
With this driver declaring capitalized BUCKx/LDOx as of_match string for
the node names, obviously no regulator gets probed: fix that by changing
the MT6360_REGULATOR_DESC macro to add a "match" parameter which gets
assigned to the of_match.
Fixes: d321571d5e ("regulator: mt6360: Add support for MT6360 regulator")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240409144438.410060-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It turns out that while the QSEECOM APP_SEND command has specific fields
for request and response buffers, uefisecapp expects them both to be in
a single memory region. Failure to adhere to this has (so far) resulted
in either no response being written to the response buffer (causing an
EIO to be emitted down the line), the SCM call to fail with EINVAL
(i.e., directly from TZ/firmware), or the device to be hard-reset.
While this issue can be triggered deterministically, in the current form
it seems to happen rather sporadically (which is why it has gone
unnoticed during earlier testing). This is likely due to the two
kzalloc() calls (for request and response) being directly after each
other. Which means that those likely return consecutive regions most of
the time, especially when not much else is going on in the system.
Fix this by allocating a single memory region for both request and
response buffers, properly aligning both structs inside it. This
unfortunately also means that the qcom_scm_qseecom_app_send() interface
needs to be restructured, as it should no longer map the DMA regions
separately. Therefore, move the responsibility of DMA allocation (or
mapping) to the caller.
Fixes: 759e7a2b62 ("firmware: Add support for Qualcomm UEFI Secure Application")
Cc: stable@vger.kernel.org # 6.7
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # X13s
Link: https://lore.kernel.org/r/20240406130125.1047436-1-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The circular buffer is NULLified in uart_tty_port_shutdown()
under the spin lock. However, the PM or other timer based callbacks
may still trigger after this event without knowning that buffer pointer
is not valid. Since the serial code is a bit inconsistent in checking
the buffer state (some rely on the head-tail positions, some on the
buffer pointer), it's better to have both aligned, i.e. buffer pointer
to be NULL and head-tail possitions to be the same, meaning it's empty.
This will prevent asynchronous calls to dereference NULL pointer as
reported recently in 8250 case:
BUG: kernel NULL pointer dereference, address: 00000cf5
Workqueue: pm pm_runtime_work
EIP: serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809)
...
? serial8250_tx_chars (drivers/tty/serial/8250/8250_port.c:1809)
__start_tx (drivers/tty/serial/8250/8250_port.c:1551)
serial8250_start_tx (drivers/tty/serial/8250/8250_port.c:1654)
serial_port_runtime_suspend (include/linux/serial_core.h:667 drivers/tty/serial/serial_port.c:63)
__rpm_callback (drivers/base/power/runtime.c:393)
? serial_port_remove (drivers/tty/serial/serial_port.c:50)
rpm_suspend (drivers/base/power/runtime.c:447)
The proposed change will prevent ->start_tx() to be called during
suspend on shut down port.
Fixes: 43066e3222 ("serial: port: Don't suspend if the port is still busy")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404031607.2e92eebe-lkp@intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240404150034.41648-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
thread_info.syscall is used by syscall_get_nr to supply syscall nr
over a thread stack frame.
Previously, thread_info.syscall is only saved at syscall_trace_enter
when syscall tracing is enabled. However rest of the kernel code do
expect syscall_get_nr to be available without syscall tracing. The
previous design breaks collect_syscall.
Move saving process to syscall entry to fix it.
Reported-by: Xi Ruoyao <xry111@xry111.site>
Link: https://github.com/util-linux/util-linux/issues/2867
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
If the "bootconfig" kernel command-line argument was specified or if
the kernel was built with CONFIG_BOOT_CONFIG_FORCE, but if there are
no embedded kernel parameter, omit the "# Parameters from bootloader:"
comment from the /proc/bootconfig file. This will cause automation
to fall back to the /proc/cmdline file, which will be identical to the
comment in this no-embedded-kernel-parameters case.
Link: https://lore.kernel.org/all/20240409044358.1156477-2-paulmck@kernel.org/
Fixes: 8b8ce6c75430 ("fs/proc: remove redundant comments from /proc/bootconfig")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
A fix for the ccache driver which no longer probed after the PLIC driver
was converted to a platform driver. The JH7100 SoC depends on this
driver to provide cache management ops that must be registered with an
arch_initcall, so the ccache driver is partly converted to a platform
driver, registering only the cache management ops with the initcall and
the debug/edac register provision features of the driver as a platform
driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRh246EGq/8RLhDjO14tDGHoIJi0gUCZhEeLQAKCRB4tDGHoIJi
0jdgAP0X6EECKhObfIXHP7uJFafYQA5UKBOgNZrA/N/VXxCDiQEAhZOz/2bq0EZu
RN8ZIjF+bV9yDPulcS9IHMJlLNw/RQg=
=F2ys
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PJbD
-----END PGP SIGNATURE-----
Merge tag 'riscv-soc-fixes-for-v6.9-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes
RISC-V SoC driver fixes for v6.9-rc3
A fix for the ccache driver which no longer probed after the PLIC driver
was converted to a platform driver. The JH7100 SoC depends on this
driver to provide cache management ops that must be registered with an
arch_initcall, so the ccache driver is partly converted to a platform
driver, registering only the cache management ops with the initcall and
the debug/edac register provision features of the driver as a platform
driver.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
* tag 'riscv-soc-fixes-for-v6.9-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux:
cache: sifive_ccache: Partially convert to a platform driver
Link: https://lore.kernel.org/r/20240406-botch-disband-efc69b8236be@spud
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A single fix to address the incorrect check of VM ID count for the
global notification in the response received for FFA_NOTIFICATION_INFO_GET()
in the schedule receiver interrupt handler.
-----BEGIN PGP SIGNATURE-----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=cVg4
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmYVUNwACgkQYKtH/8kJ
UieKDRAA4PPStD8HpQO1YL2or0roqG4mIJkD1G2CCYbYn4iZngOp+d3FoVS7AIhu
MoaDDZ3YC42vqoYIB/+/2Eu11cOfSKNcFiSencGYKlMJKu2+pUzPK9nkgKw2LzD3
AFTsY3AO0Ww5YQnwOZvuy2DRPfXkqgPS3jefw6VR1aICukR/giLzDQ8oDo/mEGMk
cr89aXD5NvF76WzhHjIeKEg45SeeMRS55GvQFmVtADcg+j/uSxMR1EVh/yeWuOfR
UPmyg+4nT83gvVtHrub51Hra9oW1VmoA5tyNRUe4QsHaObcfpDOlFDheJXl7MSZp
DDAscGN6C+mgjQp362PoqkPAP+kloGxmCwKX4+e1ROiWf92558DXxSq/ohXwcgFz
tEGWiQPYoiZuiEZOjqnNqi16vZa/NwiCAnomj2kUX5eQm4qLnzLrtcejBgcRrvUq
P7i3GZdLtXcGsLNo8AWIYE4z5xiOa+2WV6r+AWGeNo4R5RsyNB1AQtjS5mxTYoB/
3+zVFK8+CfQuX1AyOI8oc8mUigBItiHhuyvDAEdTWVgdcsjHmAaNMDVP+pFpsX1J
EWSogIvVuYvmLE6jy0GPHCvzKCKwXK3oNYBN3VpdzHKaqv1V91RSgJXTuKSioDm6
LvgbsJsiJS9k226xqbscuEZy5+ri7UvjYYBvJSpXoYKkHgkPcVU=
=NSXv
-----END PGP SIGNATURE-----
Merge tag 'ffa-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm FF-A fix for v6.9
A single fix to address the incorrect check of VM ID count for the
global notification in the response received for FFA_NOTIFICATION_INFO_GET()
in the schedule receiver interrupt handler.
* tag 'ffa-fix-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_ffa: Fix the partition ID check in ffa_notification_info_get()
Link: https://lore.kernel.org/r/20240404140339.450509-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Couple of fixes to address wrong fastchannel initialization in powercap
protocol and disable seeking support for SCMI raw debugfs entries.
-----BEGIN PGP SIGNATURE-----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=iYDI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4cp1
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI fixes for v6.9
Couple of fixes to address wrong fastchannel initialization in powercap
protocol and disable seeking support for SCMI raw debugfs entries.
* tag 'scmi-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Make raw debugfs entries non-seekable
firmware: arm_scmi: Fix wrong fastchannel initialization
Link: https://lore.kernel.org/r/20240404140306.450330-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A couple of i.MX7 board fixes from Fabio Estevam that use correct
'no-mmc' property and pass 'link-frequencies' for OV2680.
- A series from Frank Li to fix LPCG clock indices for i.MX8 subsystems.
- A couple of changes from Tim Harvey that fix USB VBUS regulator for
imx8mp-venice board.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmYOakUUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6TJwf9FXjyq5/iqt84oXWhOcYN5GfxkJ6x
7PoVEHk2YlGX1kyPLVZaQuHn9ABJdOvcALZKCjTJjresEkg61or1PCFUBE+rOqeb
0U5u005M073EdkkRzn2Fn1mDqIhWxNfCJ5N4wigTz985PqjEe3evjjL/Y1T8MXOG
Is4S+1g2imjwKJq6zLsre4QpO74Zi8cJHjoxPZMcmNIYoPHXoancNneuNQyTgGt4
YBpo5W1LwUQMBo5rstNdjELwbI5xfxrXsVBuW4XqQGd39BPDkX+IqXFPUH6atuH5
46v7atL+1vEiPWCkbxCE98/11VcW8UYh1njvdDP0O4bh66SEhjKHRm1NUw==
=2zFX
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=6Ly1
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 6.9:
- A couple of i.MX7 board fixes from Fabio Estevam that use correct
'no-mmc' property and pass 'link-frequencies' for OV2680.
- A series from Frank Li to fix LPCG clock indices for i.MX8 subsystems.
- A couple of changes from Tim Harvey that fix USB VBUS regulator for
imx8mp-venice board.
* tag 'imx-fixes-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8qm-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix can lpcg indices
arm64: dts: imx8-ss-dma: fix adc lpcg indices
arm64: dts: imx8-ss-dma: fix pwm lpcg indices
arm64: dts: imx8-ss-dma: fix spi lpcg indices
arm64: dts: imx8-ss-conn: fix usb lpcg indices
arm64: dts: imx8-ss-lsio: fix pwm lpcg indices
ARM: dts: imx7s-warp: Pass OV2680 link-frequencies
ARM: dts: imx7-mba7: Use 'no-mmc' property
arm64: dts: imx8-ss-conn: fix usdhc wrong lpcg clock order
arm64: dts: freescale: imx8mp-venice-gw73xx-2x: fix USB vbus regulator
arm64: dts: freescale: imx8mp-venice-gw72xx-2x: fix USB vbus regulator
Link: https://lore.kernel.org/r/Zg5rfaVVvD9egoBK@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A series of fixes for n8x0 GPIO regressions caused by the changes to use
GPIO descriptors.
-----BEGIN PGP SIGNATURE-----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=pHnd
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=m+W/
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v6.9/n8x0-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
GPIO regression fixes for n8x0
A series of fixes for n8x0 GPIO regressions caused by the changes to use
GPIO descriptors.
* tag 'omap-for-v6.9/n8x0-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: fix USB regression on Nokia N8x0
mmc: omap: restore original power up/down steps
mmc: omap: fix deferred probe
mmc: omap: fix broken slot switch lookup
ARM: OMAP2+: fix N810 MMC gpiod table
ARM: OMAP2+: fix bogus MMC GPIO labels on Nokia N8x0
Link: https://lore.kernel.org/r/pull-1712135932-125424@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
I'm working now at bootlin, so I'll use my bootlin address for kernel
development from now on.
Update also the yaml file for atmel-serial accordingly.
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20240408101329.9448-1-richard.genoud@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mitigation was intended to stop the irq completely. That may be
better than a hard lock-up but it turns out that you get a crash anyway
if you're using pmac_zilog as a serial console:
ttyPZ0: pmz: rx irq flood !
BUG: spinlock recursion on CPU#0, swapper/0
That's because the pr_err() call in pmz_receive_chars() results in
pmz_console_write() attempting to lock a spinlock already locked in
pmz_interrupt(). With CONFIG_DEBUG_SPINLOCK=y, this produces a fatal
BUG splat. The spinlock in question is the one in struct uart_port.
Even when it's not fatal, the serial port rx function ceases to work.
Also, the iteration limit doesn't play nicely with QEMU, as can be
seen in the bug report linked below.
A web search for other reports of the error message "pmz: rx irq flood"
didn't produce anything. So I don't think this code is needed any more.
Remove it.
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Aneesh Kumar K.V <aneesh.kumar@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.ibm.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@kernel.org
Cc: linux-m68k@lists.linux-m68k.org
Link: https://github.com/vivier/qemu-m68k/issues/44
Link: https://lore.kernel.org/all/1078874617.9746.36.camel@gaston/
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable <stable@kernel.org>
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Link: https://lore.kernel.org/r/e853cf2c762f23101cd2ddec0cc0c2be0e72685f.1712568223.git.fthain@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver complains that PCI IDs are not needed for some of the LAVA cards:
[ 0.297252] serial 0000:04:00.0: Redundant entry in serial pci_table.
[ 0.297252] Please send the output of lspci -vv, this
[ 0.297252] message (0x1407,0x0120,0x0000,0x0000), the
[ 0.297252] manufacturer and name of serial board or
[ 0.297252] modem board to <linux-serial@vger.kernel.org>.
Do as suggested.
Reported-by: Jimmy A <jimand04@hotmail.com>
Closes: https://lore.kernel.org/r/VI1P194MB052751BE157EFE9CEAB75725CE362@VI1P194MB0527.EURP194.PROD.OUTLOOK.COM
Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240403224152.945099-1-andy.shevchenko@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
