The rt9455_boost_voltage_values[] array is only used when USB PHY
support is enabled, causing a W=1 warning otherwise:
drivers/power/supply/rt9455_charger.c:200:18: error: 'rt9455_boost_voltage_values' defined but not used [-Werror=unused-const-variable=]
Enclose the definition in the same #ifdef as the references to it.
Fixes: e86d69dd78 ("power_supply: Add support for Richtek RT9455 battery charger")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-10-arnd@kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Currently we notify PM core about occurred wakes after any resume. This
is not actually needed after resume from runtime suspend. Hence, notify
PM core about occurred wakes only after resume from system sleep. Also,
if the wake occurred in USB4 router upstream port, we don't notify the
PM core about it since it is not actually needed and can cause
unexpected autowake (e.g. if /sys/power/wakeup_count is used).
While there add the missing kernel-doc for tb_switch_resume().
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Currently we don't configure correctly the wake events after unplug of device
router. What can happen is that the downstream ports of host router will be
configured to wake on: USB4-wake and wake-on-disconnect, but not on
wake-on-connect. This may cause the later plugged device not to wake the
domain and fail in enumeration. Fix this by clearing downstream port's "USB4
Port is Configured" bit, after unplug of a device router.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When the driver notices fw_status == 0xff it tries to perform a PCI
reset on itself via pci_reset_function() in the context of the driver's
health thread. However, pdsc_reset_prepare calls
pdsc_stop_health_thread(), which attempts to stop/flush the health
thread. This results in a deadlock because the stop/flush will never
complete since the driver called pci_reset_function() from the health
thread context. Fix by changing the pdsc_check_pci_health_function()
to queue a newly introduced pdsc_pci_reset_thread() on the pdsc's
work queue.
Unloading the driver in the fw_down/dead state uncovered another issue,
which can be seen in the following trace:
WARNING: CPU: 51 PID: 6914 at kernel/workqueue.c:1450 __queue_work+0x358/0x440
[...]
RIP: 0010:__queue_work+0x358/0x440
[...]
Call Trace:
<TASK>
? __warn+0x85/0x140
? __queue_work+0x358/0x440
? report_bug+0xfc/0x1e0
? handle_bug+0x3f/0x70
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __queue_work+0x358/0x440
queue_work_on+0x28/0x30
pdsc_devcmd_locked+0x96/0xe0 [pds_core]
pdsc_devcmd_reset+0x71/0xb0 [pds_core]
pdsc_teardown+0x51/0xe0 [pds_core]
pdsc_remove+0x106/0x200 [pds_core]
pci_device_remove+0x37/0xc0
device_release_driver_internal+0xae/0x140
driver_detach+0x48/0x90
bus_remove_driver+0x6d/0xf0
pci_unregister_driver+0x2e/0xa0
pdsc_cleanup_module+0x10/0x780 [pds_core]
__x64_sys_delete_module+0x142/0x2b0
? syscall_trace_enter.isra.18+0x126/0x1a0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fbd9d03a14b
[...]
Fix this by preventing the devcmd reset if the FW is not running.
Fixes: d9407ff118 ("pds_core: Prevent health thread from running during reset/remove")
Reviewed-by: Shannon Nelson <shannon.nelson@amd.com>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With default dts configuration for BPI-R2Pro, the regulator for sd card is
powered off when reboot is commanded, and the only solution to detect the
sd card again, and therefore, allow rebooting from there, is to do a
hardware reset.
Configure the regulator for sd to be always on for BPI-R2Pro in order to
avoid this issue.
Fixes: f901aaadaa ("arm64: dts: rockchip: Add Bananapi R2 Pro")
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240305143222.189413-1-jtornosm@redhat.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The definition of spectre_bhi_state() incorrectly returns a const char
* const. This causes the a compiler warning when building with W=1:
warning: type qualifiers ignored on function return type [-Wignored-qualifiers]
2812 | static const char * const spectre_bhi_state(void)
Remove the const qualifier from the pointer.
Fixes: ec9404e40e ("x86/bhi: Add BHI mitigation knob")
Reported-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240409230806.1545822-1-daniel.sneddon@linux.intel.com
There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream. This property looks
like some real hardware, just described wrongly. Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.
This fixes dtbs_check warning:
rk3568-lubancat-2.dtb: pcie@fe260000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240407102854.38672-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There is no "disable-gpios" property in the PCI bindings or Linux
driver, so assume this was copied from downstream. This property looks
like some real hardware, just described wrongly. Rockchip PCIe
controller (DesignWare based) does not define any other GPIO-s property,
except reset-gpios which is already there, so not sure what would be the
real property for this GPIO.
This fixes dtbs_check warning:
rk3566-lubancat-1.dtb: pcie@fe260000: Unevaluated properties are not allowed ('disable-gpios' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240407102854.38672-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
There is no "pcie-reset-suspend" property in the PCI bindings or Linux
driver, so assume this was copied from downstream. Drop the property,
but leave the comment, because it might be useful for someone.
This fixes dtbs_check warning:
rk3399-gru-scarlet-dumo.dtb: pcie@f8000000: Unevaluated properties are not allowed ('pcie-reset-suspend' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240407102854.38672-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Mark the PMIC as system power controller, so the board will shut-down
properly and fix the typo on rk806_dvs1_null pins property.
Fixes: 236d225e1e ("arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus")
Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240407173210.372585-1-efectn@6tel.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Designate the primary RK806 PMIC on the Pine64 QuartzPro64 as the system
power controller, so the board shuts down properly on poweroff(8).
Fixes: 152d3d070a9c ("arm64: dts: rockchip: Add QuartzPro64 SBC device tree")
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/c602dfb3972a0844f2a87b6245bdc5c3378c5989.1712512497.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
On x86 each struct cpu_hw_events maintains a table for counter assignment but
it missed to update one for the deleted event in x86_pmu_del(). This
can make perf_clear_dirty_counters() reset used counter if it's called
before event scheduling or enabling. Then it would return out of range
data which doesn't make sense.
The following code can reproduce the problem.
$ cat repro.c
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <linux/perf_event.h>
#include <sys/ioctl.h>
#include <sys/mman.h>
#include <sys/syscall.h>
struct perf_event_attr attr = {
.type = PERF_TYPE_HARDWARE,
.config = PERF_COUNT_HW_CPU_CYCLES,
.disabled = 1,
};
void *worker(void *arg)
{
int cpu = (long)arg;
int fd1 = syscall(SYS_perf_event_open, &attr, -1, cpu, -1, 0);
int fd2 = syscall(SYS_perf_event_open, &attr, -1, cpu, -1, 0);
void *p;
do {
ioctl(fd1, PERF_EVENT_IOC_ENABLE, 0);
p = mmap(NULL, 4096, PROT_READ, MAP_SHARED, fd1, 0);
ioctl(fd2, PERF_EVENT_IOC_ENABLE, 0);
ioctl(fd2, PERF_EVENT_IOC_DISABLE, 0);
munmap(p, 4096);
ioctl(fd1, PERF_EVENT_IOC_DISABLE, 0);
} while (1);
return NULL;
}
int main(void)
{
int i;
int n = sysconf(_SC_NPROCESSORS_ONLN);
pthread_t *th = calloc(n, sizeof(*th));
for (i = 0; i < n; i++)
pthread_create(&th[i], NULL, worker, (void *)(long)i);
for (i = 0; i < n; i++)
pthread_join(th[i], NULL);
free(th);
return 0;
}
And you can see the out of range data using perf stat like this.
Probably it'd be easier to see on a large machine.
$ gcc -o repro repro.c -pthread
$ ./repro &
$ sudo perf stat -A -I 1000 2>&1 | awk '{ if (length($3) > 15) print }'
1.001028462 CPU6 196,719,295,683,763 cycles # 194290.996 GHz (71.54%)
1.001028462 CPU3 396,077,485,787,730 branch-misses # 15804359784.80% of all branches (71.07%)
1.001028462 CPU17 197,608,350,727,877 branch-misses # 14594186554.56% of all branches (71.22%)
2.020064073 CPU4 198,372,472,612,140 cycles # 194681.113 GHz (70.95%)
2.020064073 CPU6 199,419,277,896,696 cycles # 195720.007 GHz (70.57%)
2.020064073 CPU20 198,147,174,025,639 cycles # 194474.654 GHz (71.03%)
2.020064073 CPU20 198,421,240,580,145 stalled-cycles-frontend # 100.14% frontend cycles idle (70.93%)
3.037443155 CPU4 197,382,689,923,416 cycles # 194043.065 GHz (71.30%)
3.037443155 CPU20 196,324,797,879,414 cycles # 193003.773 GHz (71.69%)
3.037443155 CPU5 197,679,956,608,205 stalled-cycles-backend # 1315606428.66% backend cycles idle (71.19%)
3.037443155 CPU5 198,571,860,474,851 instructions # 13215422.58 insn per cycle
It should move the contents in the cpuc->assign as well.
Fixes: 5471eea5d3 ("perf/x86: Reset the dirty counter to prevent the leak for an RDPMC task")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240306061003.1894224-1-namhyung@kernel.org
This patch to differentiate external rev id for gfx 11.5.0.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[Why]
OLED panels show no display for large vtotal timings.
[How]
Check if ss is enabled and read from lut for spread spectrum percentage.
Adjust dprefclk as required. DP_DTO adjustment is for edp only.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Zhongwei <zhongwei.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous check for the is_vsc_sdp_colorimetry_supported flag
for MST sink signals did nothing. Simplify the code and use the
same check for MST and SST.
Cc: stable@vger.kernel.org
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In order for display colorimetry to work correctly on DP displays
we need to send the VSC SDP packet. We should only do so for
panels with DPCD revision greater or equal to 1.4 as older
receivers might have problems with it.
Cc: stable@vger.kernel.org
Cc: Joshua Ashton <joshua@froggi.es>
Cc: Xaver Hugl <xaver.hugl@gmail.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Wrong logic cause screen corruption.
[How]
Port logic from DCN35/314.
Cc: stable@vger.kernel.org
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Fudongwang <fudong.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
We should not be recursively calling the manual trigger programming function when
FAMS is not in use.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
In current implemenation ODM mode is only reset when the last plane is
removed from dc state. For any dc validate we will always remove all
current planes and add new planes. However when switching from no planes
to 1 plane, ODM mode is not reset because no planes get removed. This
has caused an issue where we kept ODM combine when it should have been
remove when a plane is added. The change is to reset ODM mode when
adding the first plane.
Cc: stable@vger.kernel.org
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RB bitmap should be global active RB bitmap &
active RB bitmap based on active SA.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
mode_config's max width x height is 4096x2160 and is higher than DWB's
max resolution 3840x2160 which is returned instead.
Cc: stable@vger.kernel.org
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If there are more than one device doing reset in parallel, the first
device will call kfd_suspend_all_processes() to evict all processes
on all devices, this call takes time to finish. other device will
start reset and recover without waiting. if the process has not been
evicted before doing recover, it will be restored, then caused page
fault.
Signed-off-by: Zhigang Luo <Zhigang.Luo@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
set_q_mode_offs don't get cleared after GPU reset, nexting SET_Q_MODE
packet to init shadow memory will be skiped, hence there has a page fault.
[How]
VM flush is needed after GPU reset, clear set_q_mode_offs when
emitting VM flush.
Fixes: 8bc75586ea ("drm/amdgpu: workaround to avoid SET_Q_MODE packets v2")
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
VCN need not be shared in CPX mode always for all GFX 9.4.3 SOC SKUs. In
certain configs, VCN instance can be exclusively allocated to a
partition even under CPX mode.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
fix the high voltage issue after unload on smu 13.0.10
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
dynamic memory safety error detector (KASAN) catches and generates error
messages "BUG: KASAN: slab-out-of-bounds" as writeback connector does not
support certain features which are not initialized.
[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3199
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
SDMA_CNTL is not set in some cases, driver configures it by itself.
v2: simplify code
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch to add smu 14.0.1 support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
update ppsmc.h pmfw.h and driver_if.h for smu v14_0_1
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: lima1002 <li.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
From MES version 0x54, the log entry increased and require the log buffer
size to be increased. The 16k is maximum size agreed
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The MES log might slow down the performance for extra step of log the data,
disable it by default and introduce a parameter can enable it when necessary
Signed-off-by: shaoyunl <shaoyun.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
While doing multiple S4 stress tests, GC/RLC/PMFW get into
an invalid state resulting into hard hangs.
Adding a GFX reset as workaround just before sending the
MP1_UNLOAD message avoids this failure.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a new DCN veriosn 3.5.1 need to load
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SOC21 ASICs, there is an issue in re-enabling PM features if a
suspend got aborted. In such cases, reset the device during resume
phase. This is a workaround till a proper solution is finalized.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Otherwise the old one will be used during GPU reset.
That's not expected.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Downgrade to debug information when IBs are skipped. Also, use dev_* to
identify the device.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There are cases where soft reset seems to succeed, but
does not, so always use mode1/2 for now.
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Currently, with F32 HWS GPU reset is only when unmap queue fails.
However, if compute queue doesn't repond to preemption request in time
unmap will return without any error. In this case, only preemption error
is logged and Reset is not triggered. Call GPU reset in this case also.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Eric Dumazet says:
====================
net: start to replace copy_from_sockptr()
We got several syzbot reports about unsafe copy_from_sockptr()
calls. After fixing some of them, it appears that we could
use a new helper to factorize all the checks in one place.
This series targets net tree, we can later start converting
many call sites in net-next.
====================
Link: https://lore.kernel.org/r/20240408082845.3957374-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
copy_from_sockptr() helper is unsafe, unless callers
did the prior check against user provided optlen.
Too many callers get this wrong, lets add a helper to
fix them and avoid future copy/paste bugs.
Instead of :
if (optlen < sizeof(opt)) {
err = -EINVAL;
break;
}
if (copy_from_sockptr(&opt, optval, sizeof(opt)) {
err = -EFAULT;
break;
}
Use :
err = copy_safe_from_sockptr(&opt, sizeof(opt),
optval, optlen);
if (err)
break;
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240408082845.3957374-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In 9p2000 legacy mode, stat2inode initializes nlink to 1,
which is redundant with what alloc_inode should have already set.
9p2000.u overrides this with extensions if present in the stat
structure, and 9p2000.L incorporates nlink into its stat structure.
At the very least this probably messes with directory nlink
accounting in legacy mode.
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This chain fixes some problems with some previous patches for handling
the ASP1 config registers. The root of the problem is that the ownership
of these registers can be either with the firmware or the driver, and that
the chip has to be soft-reset after downloading the firmware.
This chain adds and uses a regmap_read_bypassed() function so that the
driver can leave the regmap in cache-only until the chip has rebooted,
but still poll a register to detect when the chip has rebooted.
Richard Fitzgerald (4):
regmap: Add regmap_read_bypassed()
ALSA: hda: cs35l56: Exit cache-only after
cs35l56_wait_for_firmware_boot()
ASoC: cs35l56: Fix unintended bus access while resetting amp
ASoC: cs35l56: Prevent overwriting firmware ASP config
drivers/base/regmap/regmap.c | 37 ++++++++++++++
include/linux/regmap.h | 8 +++
include/sound/cs35l56.h | 2 +
sound/pci/hda/cs35l56_hda.c | 4 ++
sound/soc/codecs/cs35l56-sdw.c | 2 -
sound/soc/codecs/cs35l56-shared.c | 83 ++++++++++++++++++++-----------
sound/soc/codecs/cs35l56.c | 26 +++++++++-
7 files changed, 130 insertions(+), 32 deletions(-)
--
2.39.2
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The current code will reset the ChainDMA on release unconditionally which
can result the following error when the CHainDMA is not allocated:
ipc tx : 0xe040000|0x0: GLB_CHAIN_DMA
ipc tx reply: 0x2e000007|0x0: GLB_CHAIN_DMA
FW reported error: 7 - Unsupported operation requested
ipc error for msg 0xe040000|0x0
sof_pcm_stream_free: pcm_ops hw_free failed -22
Background:
Pulseaudio and Pipewire on startup opens all available streams and
closes them without triggering a start (after probing it's capabilities).
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
We somehow missed the default path for DSP libraries for LNL, and need
to restrict support for D0i3 w/ IPC4. Also add debugfs support for
firmware profile information so that sof-test scripts can show what is
being tested.
