Update FW initialised state shared resource access with READ/WRITE_ONCE
to prevent following:
- Non-atomic access to variable in multi-thread/CPU case.
- Merge successive loads from the same variable.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260519-b4-context_reset-v2-4-931018a7131d@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Rename the variable from 'booted' to 'initialised' to align with the
driver's expectations and state, indicating that FW boot initialisation
is complete and the firmware is fully initialised.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260519-b4-context_reset-v2-3-931018a7131d@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Verify the job’s fence in the timeout handler; if the firmware has since
signaled completion, then report NO HANG.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260519-b4-context_reset-v2-2-931018a7131d@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Initialise the context ID for the FW common context correctly by moving
the context allocation earlier.
Signed-off-by: Brajesh Gupta <brajesh.gupta@imgtec.com>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/20260519-b4-context_reset-v2-1-931018a7131d@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Up to now drm_of_find_panel_or_bridge() can be called with a bridge pointer
only, a panel pointer only, or both a bridge and a panel pointers. The
logic to handle all the three cases is somewhat complex to read however.
Now all bridge-only callers have been converted to
of_drm_get_bridge_by_endpoint(), which is simpler and handles bridge
refcounting. So forbid new bridge-only users by mandating a non-NULL panel
pointer in the docs and in the sanity checks along with a warning.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-11-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-10-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-9-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-8-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-7-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-6-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. To achieve this, instead of
adding an explicit drm_bridge_put(), migrate to the bridge::next_bridge
pointer which is automatically put when the bridge is eventually freed.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-5-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal. Here the bridge pointer is
only stored in a temporary variable, so a cleanup action is enough.
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-4-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
This driver calls drm_of_find_panel_or_bridge() with a NULL pointer in the
@panel parameter, thus using a reduced feature set of that function.
Replace this call with the simpler of_drm_get_bridge_by_endpoint().
Since of_drm_get_bridge_by_endpoint() increases the refcount of the
returned bridge, ensure it is put on removal.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-3-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
drm_of_find_panel_or_bridge() is widely used, but many callers pass NULL
into the @panel or the @bridge arguments, thus making a very partial usage
of this rather complex function.
Besides, the bridge returned in @bridge is not refcounted, thus making this
API unsafe when DRM bridge hotplug will be introduced.
Solve both issues for the cases of calls to drm_of_find_panel_or_bridge()
with a NULL @panel pointer by adding a new function that only looks for
bridges (and is thus much simpler) and increments the refcount of the
returned bridge.
The new function is identical to drm_of_find_panel_or_bridge() except it:
- handles bridge refcounting: uses of_drm_find_and_get_bridge() instead of
of_drm_find_bridge() internally to return a refcounted bridge
- is simpler to use: just takes no @panel parameter, returns the pointer
in the return value instead of a double pointer argument
- has a simpler implementation: it is equal to
drm_of_find_panel_or_bridge() after removing the code that becomes dead
when @panel == NULL
Also add this function to drm_bridge.c and not drm_of.c because it returns
bridges only.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-2-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Most functions returning a struct drm_bridge pointer currently return a
valid pointer or NULL, but this restricts their ability to return an error
code as an ERR_PTR describing the error kind.
In preparation to have new APIs that can return a struct drm_bridge pointer
holding an ERR_PTR (and for those which already do) make drm_bridge_put()
ignore ERR_PTR values, just like it ignores NULL pointers.
This will avoid annoying error checking in many places and the risk of
missing error checks.
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/all/20260318152533.GA633439@killaraus.ideasonboard.com/
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/all/omlnswxukeqgnatzdvooaashgkfcacjevkvbkm6xt33itgua2k@jcmzll2w6kdq/
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-1-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Use devm_drm_bridge_add() so the bridge is released if probe fails after
registration, and drop drm_bridge_remove() in chipone_dsi_probe.
Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260430194944.78119-2-osama.abdelkader@gmail.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Introduce an expandable device heap to avoid allocating a large heap
upfront. Start with a smaller initial heap and grow it on demand.
Return -EAGAIN when BO allocation fails due to insufficient heap space,
allowing userspace to trigger heap expansion via a heap BO creation
IOCTL and retry the allocation.
Manage heap chunks using an xarray. On expansion, register new chunks
with the firmware via MSG_OP_ADD_HOST_BUFFER.
Since heap shrinking is not supported by the firmware, release all heap
chunks on device close.
Co-developed-by: Wendy Liang <wendy.liang@amd.com>
Signed-off-by: Wendy Liang <wendy.liang@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260515161922.744647-1-lizhi.hou@amd.com
Three sideband reply parsers read 16-bit fields as:
val = (raw->msg[idx] << 8) | (raw->msg[idx+1]);
and check bounds only after the fact. When idx == raw->curlen,
raw->msg[idx+1] reads one byte past the received message data into
the following struct fields (curchunk_len, curchunk_idx, curlen).
Affected functions:
- drm_dp_sideband_parse_enum_path_resources_ack()
full_payload_bw_number and avail_payload_bw_number fields
- drm_dp_sideband_parse_allocate_payload_ack()
allocated_pbn field
- drm_dp_sideband_parse_query_payload_ack()
allocated_pbn field
Fix by using a single combined check (idx + 2 > curlen) before each
2-byte read. Since the check is strictly tighter than idx > curlen,
no separate step is needed.
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added fixes tag]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260510203128.2884846-1-ashutoshdesai993@gmail.com
drm_dp_sideband_parse_remote_dpcd_read() reads num_bytes from the raw
message and then unconditionally does:
memcpy(bytes, &raw->msg[idx], num_bytes);
without checking that idx + num_bytes <= raw->curlen. raw->msg[] is
256 bytes; if a malicious or misbehaving MST hub sets num_bytes larger
than the remaining payload, the memcpy reads past the received data
into whatever follows in raw->msg[].
drm_dp_sideband_parse_remote_i2c_read_ack() has the same flaw (noted
with a /* TODO check */ comment since the code was introduced).
Fix both functions by using a single combined check
(idx + num_bytes > curlen) before each memcpy. Since num_bytes is u8,
it is always >= 0, so this strictly subsumes the simpler idx > curlen
form and no separate step is needed.
Fixes: ad7f8a1f9c ("drm/helper: add Displayport multi-stream helper (v0.6)")
Cc: <stable@vger.kernel.org> # v3.17+
Signed-off-by: Ashutosh Desai <ashutoshdesai993@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[added missing fixes tag]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patch.msgid.link/20260510201733.2882224-1-ashutoshdesai993@gmail.com
Commit 18226ba521 ("drm/syncobj: reject invalid flags in
drm_syncobj_find_fence") forgot to take into account the fact that
drm_syncobj_find() takes a reference to syncobj and returns early
without dropping the reference, leading to memory leaks.
Fixes: 18226ba521 ("drm/syncobj: reject invalid flags in drm_syncobj_find_fence")
Reported by: Sam Spencer <sam.spencer@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Erik Kurzinger <ekurzinger@gmail.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/all/20260507144425.2488057-1-liviu.dudau@arm.com
Regions with a BO are checked against the BO size, but the SRAM
region is not. The SRAM region doesn't have a BO, but the command stream
region size should be checked against the SRAM size. The job's
"sram_size" isn't useful here because an evil userspace could lie about
the size.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260513185434.1667045-1-robh@kernel.org
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
If userspace never maps GEM object, then BO wastes hostmem space
because VirtIO-GPU driver maps VRAM BO at the BO's creating time.
Make mappings on-demand by adding new RESOURCE_CREATE_BLOB IOCTL/UAPI
hinting flag telling that host mapping should be deferred until first
mapping is made when the flag is set by userspace.
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patch.msgid.link/20260501000043.2483678-1-dmitry.osipenko@collabora.com
fpfn and lpfn in struct ttm_place are 32-bit page numbers. With 4KB page
size this can support up to 44-bit physical addressing. Grow these to
64-bit (uint64_t) to support larger physical addresses.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Link: https://patch.msgid.link/20260513141253.20410-1-felix.kuehling@amd.com
Some of the GPU documentation pages are quite long, with various levels
of details. Add document internal tables of contents to the larger
documents to make them easier to navigate.
The index.rst in the sub-directories have toctrees, which provide
similar overviews.
Fix one missing newline at the end of drm-uapi.rst while at it,
primarily because rst should have it, and secondarily because my editor
rst mode refuses to save the file without it.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/e3f9357c0e8198cc48e69e2a3b8ca072c7ab92ca.1778238671.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The main GPU documentation toctree has no limit to the toctree depth,
which means the main GPU index page recursively includes all the
headings in all of GPU documentation in the single table of
contents. This makes getting any kind of overview of the documentation
really difficult.
Limit the main toctree depth to 2 i.e. show at most two levels of
headings.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/cddd2d11c104132801510e3ab4e4b9ef3ea9cb6d.1778238671.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In the past, we use width and height to look up our PLL value.
But actually the actual clock check is also necessnary. There are
some resolutions that width and height same, but its clock different.
Add the clock check when using pll_table to determine the PLL value.
Fixes: da52605eea ("drm/hisilicon/hibmc: Add support for display engine")
Signed-off-by: Lin He <helin52@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260509032302.2057227-5-shiyongbang@huawei.com
If there's no VGA output, this encoder modeset won't be called, which
will cause displaying data from GPU being cut off. It's actually a
common display config for DP and VGA, so move the vdac encoder modeset
to driver load stage.
Removed invalid bit configurations from `hibmc_display_ctrl`
Fixes: 5294967f4a ("drm/hisilicon/hibmc: Add support for VDAC")
Signed-off-by: Lin He <helin52@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260509032302.2057227-4-shiyongbang@huawei.com
Our chip support KVM over IP feature, so hibmc driver need to support
displaying without any connectors plugged in. If no connectors are
connected, the vdac connector status should be set to 'connected' to
ensure proper KVM display functionality. Additionally, for
previous-generation products that may lack hardware link support and
thus cannot detect the monitor, the same approach should be applied
to ensure VGA display functionality.
* Add phys_state in the struct of dp and vdac to check physical outputs.
* The 'epoch_counter' of the vdac connector is incremented when the
physical status changes.
For get_modes: using BMC modes for connector if no display is attached to
phys VGA cable, otherwise use EDID modes by drm_connector_helper_get_modes,
because KVM doesn't provide EDID reads.
The polling mechanism for the KMS helper is enabled.
Fixes: 4c962bc929 ("drm/hisilicon/hibmc: Add vga connector detect functions")
Reported-by: Thomas Zimmermann <tzimmermann@suse.de>
Closes: https://lore.kernel.org/all/0eb5c509-2724-4c57-87ad-74e4270d5a5a@suse.de/
Signed-off-by: Lin He <helin52@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260509032302.2057227-3-shiyongbang@huawei.com
In the past, the link cap is updated in link training at encoder enable
stage, but the hibmc_dp_mode_valid() is called before it, which will use
DP link's rate and lanes. So add the hibmc_dp_update_caps() in
hibmc_dp_update_caps() to avoid some potential risks.
Fixes: 607805abfb ("drm/hisilicon/hibmc: add dp mode valid check")
Signed-off-by: Lin He <helin52@huawei.com>
Signed-off-by: Yongbang Shi <shiyongbang@huawei.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260509032302.2057227-2-shiyongbang@huawei.com
Consolidate the two-element allocation into a single allocation using a
flexible array member. This reduces memory fragmentation and simplifies
the error path by eliminating the need to check for allocation failure
between the two allocations.
Add __counted_by for runtime bounds checking.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Tested-by: Youssef Samir <youssef.abdulrahman@oss.qualcomm.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Link: https://patch.msgid.link/20260401220643.12802-1-rosenp@gmail.com
Currently the DP SDP log helpers use spaces for indentation. Switch to
tabs for indentation and use drm_printf_indent to keep the format
strings readable.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-10-ankit.k.nautiyal@intel.com
The field target_rr_divider is missing from the AS SDP logging.
Add it and print the divider value (1.001 or 1.000) as per the DP 2.1 spec.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-9-ankit.k.nautiyal@intel.com
Introduce dp_sdp_type_get_name() to get the SDP type as a string.
Use this to log the SDP type based on the sdp_type fields of the
VSC and AS SDPs instead of the hardcoded strings.
v2: Modify the SDP names to match the DisplayPort Spec. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-8-ankit.k.nautiyal@intel.com
Add new field in struct drm_dp_as_sdp to store coasting vtotal.
This is used by the sinks that support Panel Replay and Asynchronous
timing during PR Active to derive refresh rate, when AS SDP transmission
is stopped by the source.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-7-ankit.k.nautiyal@intel.com
Replace underscores with spaces in AS SDP log field labels to be
consistent with the VSC SDP logging style.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-6-ankit.k.nautiyal@intel.com
Add additional DPCDs required to be configured to support VRR with Panel
Replay. These DPCDs are specifically required for configuring Adaptive Sync
SDP and are introduced in DP v2.1.
v2:
- Correct the shift for the bits. (Ville)
- Add DP_PR_ prefix for the PR-related fields.
v3:
- Use macro values in their shifted form to match the convention. (Ville)
v4:
- Add macro for the mask. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-5-ankit.k.nautiyal@intel.com
DP v2.1 introduced support for sending AS SDP payload bytes for FAVT.
Add the relavant bits for the same.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-4-ankit.k.nautiyal@intel.com
Align the DP_DPRX feature enumeration macros for better readability and
consistency, and use the BIT() macro instead of open-coded shifts.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-3-ankit.k.nautiyal@intel.com
The AS SDP payload field masks were misnamed and placed under the DPRX
feature enumeration list. These are not DPRX capability bits, but are
payload field masks for the Adaptive Sync SDP.
Relocate both masks next to the AS SDP definitions.
Update users to the corrected names. No functional change.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-2-ankit.k.nautiyal@intel.com
Now that all panel drivers use devm_drm_panel_alloc(),
there are no external callers of drm_panel_init().
Make it static to prevent new users from bypassing the
refcounted allocation path.
Remove stale references to drm_panel_init() in kdocs.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-10-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-9-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-8-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-7-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-6-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-5-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move to using the new API devm_drm_panel_alloc() to allocate the
panel. In the call to the new API, avoid using explicit type and use
__typeof() for more type safety.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Albert Esteve <aesteve@redhat.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260508-drm_panel_init_rm-v2-4-0bd4ac429971@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
