[WHY & HOW]
Virtual sink is not audio-capable and this causes kms_hdmi_inject's
inject-audio to fail. Set it to HDMI according to EDID.
Reviewed-by: Chao-kai Wang <stylon.wang@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 4ad3ee5ccc.
[WHY & HOW]
Virtual signal is not supported as audio capable by DC.
Reviewed-by: Chao-kai Wang <stylon.wang@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Bandwidth validation failure on framepack tests.
Need to double pixel clock when 3D format is
framepack. Also for HDMI displays, we need to
keep the ITC flag to 1 by default.
[how]
Double the pixel clock when using framepack 3D format.
Set hdmi ITC bit to 1.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Intermittent reboot hangs are observed introduced by
"Improve x86 and dmub ips handshake".
[How]
Bring back the commit but fix the polling.
Avoid hanging in place forever by bounding the delay and ensure that
we still message DMCUB on IPS2 exit to notify driver idle has been
cleared.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Unify pipe resource management logic in dc resource layer.
V2:
Add default case for switch.
CC: Hamza Mahfooz <hamza.mahfooz@amd.com>
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need DML2 to support new pipe resource management APIs.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Currently set_default_brightness_aux function uses 5 nits as lower limit
to check for valid default_backlight setting. However some newer panels
can support even lower default settings
Reviewed-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Swapnil Patel <swapnil.patel@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Certain test equipment vendors check the SDP VSC for colorimetry against
the value from the test request during certain DP link layer tests for
YCbCr test cases.
[How]
Update SDP VSC with colorimetry from test automation request.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Need a helper function to check idle power is allowed
so that dc doesn't access any registers that are power-gated.
[how]
Implement helper function to check idle power optimization.
Enable a hook to check if detection is allowed.
V2:
Add function hooks for set and get idle states.
Check if function hook was properly initialized.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Reviewed-by: Nicholas Choi <nicholas.choi@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 1288d70208.
Causes intermittent hangs during reboot stress testing.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dcn35 misses .enable_symclk_se hook that makes MST DSC
not functional when having multiple FE clk to be enabled.
Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently there are separate but related checks:
* amdgpu_device_should_use_aspm()
* amdgpu_device_aspm_support_quirk()
* amdgpu_device_pcie_dynamic_switching_supported()
Simplify into checking whether DPM was enabled or not in the auto
case. This works because amdgpu_device_pcie_dynamic_switching_supported()
populates that value.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is no need for every ASIC driver to perform the same check.
Move the duplicated code into amdgpu_device_should_use_aspm().
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than individual ASICs checking for the quirk, set the quirk at the
driver level.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit dc427a473e.
The change prevents migrating the entire range to VRAM because retry
fault restore_pages map the remaining system memory range to GPUs. It
will work correctly to submit together with partial mapping to GPU
patch later.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit f9caf6cdd5.
Needed for the next revert patch.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Fix incomplete copyright notice in DC code.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove restriction of sriov max_pfn so that TBA and TMA can move to high
47 bits address.
Regression test: change range alloc flag of libdrm as
AMDGPU_VA_RANGE_HIGH and there is no flr occur when testing amdgpu_test
of drm.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_svm.c:2073: warning: Function parameter or member 'remap_list' not described in 'svm_range_add'
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW is responsible for RAS error reset in some conditions, driver can
skip the operation.
v2: add check for ras->in_recovery, it's set earlier than
amdgpu_in_reset.
v3: fix error in gpu reset check.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable it by default on APU platform.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Otherwise IB test would fail during GPU reset.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When DML 2 was introduced, it changed part of the generic sequence of
DC, which caused issues on previous DCNs with DMUB support. This commit
ensures the new sequence only works for new DCNs from 3.5 and above.
Changes since V1:
- Harry: Use the attribute using_dml2 instead of check the DCN version.
Cc: Vitaly Prosyak <vprosyak@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Fixes: 7966f319c6 ("drm/amd/display: Introduce DML2")
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Originally we were quirking ASPM disabled specifically for VI when
used with Alder Lake, but it appears to have problems with Rocket
Lake as well.
Like we've done in the case of dpm for newer platforms, disable
ASPM for all Intel systems.
Cc: stable@vger.kernel.org # 5.15+
Fixes: 0064b0ce85 ("drm/amd/pm: enable ASPM by default")
Reported-and-tested-by: Paolo Gentili <paolo.gentili@canonical.com>
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2036742
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Some ASICs keep backlight powered on after dpms off
command has been issued.
[How]
The check for no edp power sequencing was never going to pass.
The value is never changed from what it is set by design.
Cc: stable@vger.kernel.org # 6.1+
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2765
Reviewed-by: Swapnil Patel <swapnil.patel@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Agustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When DML2 was introduced, it targeted only new DCN versions. For
controlling which ASIC should use this new version of DML, it was
introduced the using_dml2 attribute. To avoid ambiguities, this commit
explicitly sets using_dml2 to false in all ASICs that do not support
DML2.
Cc: Vitaly Prosyak <vprosyak@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Qingqing Zhuo <Qingqing.Zhuo@amd.com>
Cc: Daniel Wheeler <daniel.wheeler@amd.com>
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix the return value in default case and drop
redundant 'break'.
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fetch the full version of IP including variant and subrevision.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Le Ma <le.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
PMFW will handle the features disablement properly for gpu reset case,
driver involvement may cause some unexpected issues.
Signed-off-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
remove unnecessary "enable" in if condition.
Signed-off-by: Li Ma <li.ma@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the origin function might return the wrong node.
Fixes: 5b1270beb3 ("drm/amdgpu: add ras_err_info to identify RAS error source")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
During system boot in second screen only mode on a seamless boot system,
there is a chance that the pipe's det size might not be reset.
[How]
Reset the det size while resetting the pipe during seamless boot.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hugo Hu <hugo.hu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Call amdgpu_ras_set_mca_debug_mode when we set mca debug mode in smu
v13_0_6.
Signed-off-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
usb: typec: altmodes/displayport: Signal hpd low when exiting mode
and
drm: Add HPD state to drm_connector_oob_hotplug_event()
sideswiped each other.
Signal disconnected always.
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is just a process PR to merge the topic branch into drm-next, this contains some core kernel and drm changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----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=8GVw
-----END PGP SIGNATURE-----
Merge tag 'topic/vmemdup-user-array-2023-10-24-1' of git://anongit.freedesktop.org/drm/drm into drm-next
vmemdup-user-array API and changes with it.
This is just a process PR to merge the topic branch into drm-next, this contains some core kernel and drm changes.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231024010905.646830-1-airlied@redhat.com
Updates for v6.7
DP:
- use existing helpers for DPCD handling instead of open-coded functions
- set the subconnector type according to the plugged cable / dongle
skip validity check for DP CTS EDID checksum
DPU:
- continued migration of feature flags to use core revision checks
- reworked interrupts code to use '0' as NO_IRQ, removed raw IRQ indices
from log / trace output
gpu:
- a7xx support (a730, a740)
- fixes and additional speedbins for a635, a643
core:
- decouple msm_drv from kms to more cleanly support headless devices (like
imx5+a2xx)
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvzkBL2_OgyOeP_b6rVEjrNdfm8jcKzaB04HqHyT5jYwA@mail.gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmU1ngkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGrsIH/0k/+gdBBYFFdEym
foRhKir9WV3ZX4oIozJjA1f7T+qVYclKs6kaYm3gNepRBb6AoG8pdgv4MMAqhYsf
QMe2XHi0MrO/qKBgfNfivxEa9jq+0QK5uvTbqCRqCAB8LfwVyDqapCmg3EuiZcPW
UbMITmnwLIfXgPxvp9rabmCsTqO6FLbf0GDOVIkNSAIDBXMpcO1iffjrWUbhRa7n
oIoiJmWJLcXLxPWDsRKbpJwzw2cIG08YhfQYAiQnC3YaeRm1FKLDIICRBsmfYzja
rWv9r4dn4TDfV4/AnjggQnsZvz2yPCxNaFSQIT88nIeiLvyuUTJ9j8aidsSfMZQf
xZAbzbA=
=NoQv
-----END PGP SIGNATURE-----
BackMerge tag 'v6.6-rc7' into drm-next
This is needed to add the msm pr which is based on a higher base.
Signed-off-by: Dave Airlie <airlied@redhat.com>
- don't try to print warnings to the console when it is no longer
available
- fix theoretical memory leak in SSDT override handling
- make sure that the boot_params global variable is set before the KASLR
code attempts to hash it for 'randomness'
- avoid soft lockups in the memory acceptance code
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQQm/3uucuRGn1Dmh0wbglWLn0tXAUCZTKmyAAKCRAwbglWLn0t
XOvWAQCz+MYqhf3HbmsyuzEV/HWxEw9gf+KGqSN9wmCrOI5nRAEA7pIWUpZ2e6Jt
eW/6DiyPZ+o7xLMX6J01vLROmQt1ogo=
=iVui
-----END PGP SIGNATURE-----
Merge tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fixes from Ard Biesheuvel:
"The boot_params pointer fix uses a somewhat ugly extern struct
declaration but this will be cleaned up the next cycle.
- don't try to print warnings to the console when it is no longer
available
- fix theoretical memory leak in SSDT override handling
- make sure that the boot_params global variable is set before the
KASLR code attempts to hash it for 'randomness'
- avoid soft lockups in the memory acceptance code"
* tag 'efi-fixes-for-v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi/unaccepted: Fix soft lockups caused by parallel memory acceptance
x86/boot: efistub: Assign global boot_params variable
efi: fix memory leak in krealloc failure handling
x86/efistub: Don't try to print after ExitBootService()
- Fix stale propagated yield_cpu in qspinlocks leading to lockups.
- Fix broken hugepages on some configs due to ARCH_FORCE_MAX_ORDER.
- Fix a spurious warning when copros are in use at exit time.
Thanks to: Nicholas Piggin, Christophe Leroy, Nysal Jan K.A Sachin Sant,
Shrikanth Hegde.
-----BEGIN PGP SIGNATURE-----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=2Sx6
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix stale propagated yield_cpu in qspinlocks leading to lockups
- Fix broken hugepages on some configs due to ARCH_FORCE_MAX_ORDER
- Fix a spurious warning when copros are in use at exit time
Thanks to Nicholas Piggin, Christophe Leroy, Nysal Jan K.A Sachin Sant,
and Shrikanth Hegde.
* tag 'powerpc-6.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/qspinlock: Fix stale propagated yield_cpu
powerpc/64s/radix: Don't warn on copros in radix__tlb_flush()
powerpc/mm: Allow ARCH_FORCE_MAX_ORDER up to 12
- fix interrupt handling in suspend and wakeup in gpio-vf610
- fix a bug on setting direction to output in gpio-vf610
- add a missing memset() in gpio ACPI code
-----BEGIN PGP SIGNATURE-----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=atb6
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix interrupt handling in suspend and wakeup in gpio-vf610
- fix a bug on setting direction to output in gpio-vf610
- add a missing memset() in gpio ACPI code
* tag 'gpio-fixes-for-v6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpiolib: acpi: Add missing memset(0) to acpi_get_gpiod_from_data()
gpio: vf610: set value before the direction to avoid a glitch
gpio: vf610: mask the gpio irq in system suspend and support wakeup
