Remove unused structures and avoid the following
-Wflex-array-member-not-at-end warnings:
drivers/net/wireless/intel/iwlegacy/iwl-spectrum.h:68:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/intel/iwlegacy/iwl-spectrum.h:60:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Link: https://patch.msgid.link/aJl7TxeWgLdEKWhg@kspp
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The NVRAM selection logic in brcmf_fw_request_nvram_done() used
patterns like:
if ((data = bcm47xx_nvram_get_contents(&data_len)))
free_bcm47xx_nvram = true;
else if ((data = brcmf_fw_nvram_from_efi(&data_len)))
kfree_nvram = true;
This style violates kernel coding style guidelines and triggers
checkpatch.pl errors. It also slightly reduces readability.
Refactor these cases by separating the assignment and the check,
ensuring behavior remains identical while complying with coding
standards.
Signed-off-by: Darshan Rathod <darshanrathod475@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250812123636.2142292-1-darshanrathod475@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Tracepoints that are defined take up around 5K each, even if they are not
used. If they are defined and not used, then they waste memory for unused
code. Soon unused tracepoints will cause warnings.
Remove the unused tracepoints of the cfg80211 subsystem. They are:
cfg80211_chandef_dfs_required
cfg80211_return_u32
cfg80211_return_uint
cfg80211_send_rx_auth
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://patch.msgid.link/20250828221759.131160ee@batman.local.home
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cross-merge networking fixes after downstream PR (net-6.17-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/idpf/idpf_txrx.c
02614eee26 ("idpf: do not linearize big TSO packets")
6c4e684802 ("idpf: remove obsolete stashing code")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
ice: split ice_virtchnl.c git-blame friendly way
Przemek Kitszel says:
Split ice_virtchnl.c into two more files (+headers), in a way
that git-blame works better.
Then move virtchnl files into a new subdir.
No logic changes.
I have developed (or discovered ;)) how to split a file in a way that
both old and new are nice in terms of git-blame
There was not much discussion on [RFC], so I would like to propose
to go forward with this approach.
There are more commits needed to have it nice, so it forms a git-log vs
git-blame tradeoff, but (after the brief moment that this is on the top)
we spend orders of magnitude more time looking at the blame output (and
commit messages linked from that) - so I find it much better to see
actual logic changes instead of "move xx to yy" stuff (typical for
"squashed/single-commit splits").
Cherry-picks/rebases work the same with this method as with simple
"squashed/single-commit" approach (literally all commits squashed into
one (to have better git-log, but shitty git-blame output).
Rationale for the split itself is, as usual, "file is big and we want to
extend it".
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: finish virtchnl.c split into rss.c
ice: extract virt/rss.c: cleanup - p2
ice: extract virt/rss.c: cleanup - p1
ice: split RSS stuff out of virtchnl.c - copy back
ice: split RSS stuff out of virtchnl.c - tmp rename
ice: finish virtchnl.c split into queues.c
ice: extract virt/queues.c: cleanup - p3
ice: extract virt/queues.c: cleanup - p2
ice: extract virt/queues.c: cleanup - p1
ice: split queue stuff out of virtchnl.c - copy back
ice: split queue stuff out of virtchnl.c - tmp rename
ice: add virt/ and move ice_virtchnl* files there
====================
Link: https://patch.msgid.link/20250827224641.415806-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 has a Kconfig co-dependency on VXLAN, even tho it doesn't
call any VXLAN function (unlike mlxsw). Perhaps this dates back
to very old days when tunnel ports were fetched directly from
VXLAN.
Remove the dependency to allow MLX5=y + VXLAN=m kernel configs.
But still avoid compiling in the lib/vxlan code if VXLAN=n.
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://patch.msgid.link/20250827234319.3504852-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The C45 accessors were setting the GR (register number) field twice,
once with the 16-bit register address truncated to five bits, and
then overwritten with the C45 devad. This is harmless since the field
was being cleared prior to being updated with the C45 devad, except
for the extra work.
Remove the redundant code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1urGBn-00000000DCH-3swS@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net_sched: extend RCU use in dump() methods (II)
Second series adding RCU dump() to three actions
First patch removes BH blocking on modules done in the first series.
====================
Link: https://patch.msgid.link/20250827125349.3505302-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_skbmod_params
makes sure there is no discrepancy in tcf_skbmod_act().
No longer block BH in tcf_skbmod_init() when acquiring tcf_lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250827125349.3505302-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_tunnel_key_params
makes sure there is no discrepancy in tunnel_key_act().
No longer block BH in tunnel_key_init() when acquiring tcf_lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250827125349.3505302-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Also storing tcf_action into struct tcf_vlan_params
makes sure there is no discrepancy in tcf_vlan_act().
No longer block BH in tcf_vlan_init() when acquiring tcf_lock.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250827125349.3505302-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Followup of f45b45cbfa ("Merge branch
'net_sched-act-extend-rcu-use-in-dump-methods'")
We never grab tcf_lock from BH context in these modules:
act_connmark
act_csum
act_ct
act_ctinfo
act_mpls
act_nat
act_pedit
act_skbedit
No longer block BH when acquiring tcf_lock from init functions.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250827125349.3505302-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_bus_clks_config() doesn't need to repeatedly on dereference
priv->plat as this remains the same throughout this function. Not only
does this detract from the function's readability, but it could cause
the value to be reloaded each time. Use a local variable.
Also, the final return can simply return zero, and we can dispense
with the initialiser for 'ret'.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1urBvf-000000002ii-37Ce@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_priv() is an inline function, taking a struct net_device
pointer. When passing in the MII bus->priv, which is a void pointer,
there is no need to go via a local ndev variable to type it first.
Thus, instead of:
struct net_device *ndev = bus->priv;
struct stmmac_priv *priv;
...
priv = netdev_priv(ndev);
we can simply do:
struct stmmac_priv *priv = netdev_priv(bus->priv);
which simplifies the code.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/E1urBj2-000000002as-0pod@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add LED support for MT7988's built-in 2.5Gphy. LED hardware has almost
the same design with MT7981's/MT7988's built-in GbE. So hook the same
helper function here.
Before mtk_phy_leds_state_init(), set correct default values of LED0
and LED1.
Signed-off-by: Sky Huang <skylake.huang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250827044755.3256991-1-SkyLake.Huang@mediatek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing locking annotations to two recently introduced
list_for_each_entry_rcu() loops in the core device suspend/resume
code (Johannes Berg)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmiws2ESHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1hSIIAI8UeQnihDtPYR0bklyzENW/g17Du/4M
UZPxd50YB4xSofLhHDZCf214Yg5vihV3Hdj51XkDn+Wyd2HTYC5GW/qLcUL9gpLj
MflA6O0ZtYpAE3bByK+XI4Wwas05h/LuF63ty8i+2zrS7NV7EaFa1+3Hj7wgQ7wZ
QGsaTdet3kxgJa/KbLOkzXayrLiAk4OtrFpABu+8cjzHi1wDg8on00+zW1FN5b9U
f14jsdds+as1usw6Gf8lSSUgtLNQ/kQ41Btg2naG4B6TD9N9WpVwkx1TCrXcDj2E
Wff/dTSfBU8As8D9ZPr4HOk9tmFmdwcFareT4wRBljbys6ixgYvxGX8=
=9Avh
-----END PGP SIGNATURE-----
Merge tag 'pm-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Add missing locking annotations to two recently introduced
list_for_each_entry_rcu() loops in the core device suspend/resume
code (Johannes Berg)"
* tag 'pm-6.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: annotate RCU list iterations
Commit 0d6ccfe6b3 ("selftests: drv-net: rss_ctx: check for all-zero keys")
added a skip exception if NIC has fewer than 3 queues enabled,
but it's just constructing the object, it's not actually rising
this exception.
Before:
# Exception| net.lib.py.utils.CmdExitFailure: Command failed: ethtool -X enp1s0 equal 3 hkey d1:cc:77:47:9d:ea:15:f2:b9:6c:ef:68:62:c0:45:d5:b0:99:7d:cf:29:53:40:06:3d:8e:b9:bc:d4:70:89:b8:8d:59:04:ea:a9:c2:21:b3:55:b8:ab:6b:d9:48:b4:bd:4c:ff:a5:f0:a8:c2
not ok 1 rss_ctx.test_rss_key_indir
After:
ok 1 rss_ctx.test_rss_key_indir # SKIP Device has fewer than 3 queues (or doesn't support queue stats)
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250827173558.3259072-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Dragos Tatulea says:
====================
devmem/io_uring: allow more flexibility for ZC DMA devices
For TCP zerocopy rx (io_uring, devmem), there is an assumption that the
parent device can do DMA. However that is not always the case:
- Scalable Function netdevs [1] have the DMA device in the grandparent.
- For Multi-PF netdevs [2] queues can be associated to different DMA
devices.
The series adds an API for getting the DMA device for a netdev queue.
Drivers that have special requirements can implement the newly added
queue management op. Otherwise the parent will still be used as before.
This series continues with switching to this API for io_uring zcrx and
devmem and adds a ndo_queue_dma_dev op for mlx5.
The last part of the series changes devmem rx bind to get the DMA device
per queue and blocks the case when multiple queues use different DMA
devices. The tx bind is left as is.
[1] Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst
[2] Documentation/networking/multi-pf-netdev.rst
====================
Link: https://patch.msgid.link/20250827144017.1529208-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Multi-PF netdevs have queues belonging to different PFs which also means
different DMA devices. This means that the binding on the DMA buffer can
be done to the incorrect device.
This change allows devmem binding to multiple queues only when the
queues have the same DMA device. Otherwise an error is returned.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://patch.msgid.link/20250827144017.1529208-9-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of reading the requested rx queues after binding the buffer,
read the rx queues in advance in a bitmap and iterate over them when
needed.
This is a preparation for fetching the DMA device for each queue.
This patch has no functional changes besides adding an extra
rq index bounds check.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250827144017.1529208-8-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fetch the DMA device before calling net_devmem_bind_dmabuf()
and pass it on as a parameter.
This is needed for an upcoming change which will read the
DMA device per queue.
This patch has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250827144017.1529208-7-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For zero-copy (devmem, io_uring), the netdev DMA device used
is the parent device of the net device. However that is not
always accurate for mlx5 devices:
- SFs: The parent device is an auxdev.
- Multi-PF netdevs: The DMA device should be determined by
the queue.
This change implements the DMA device queue API that returns the DMA
device appropriately for all cases.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250827144017.1529208-6-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to the new API for fetching DMA devices for a netdev. The API is
called with queue index 0 for now which is equivalent with the previous
behavior.
This patch will allow devmem to work with devices where the DMA device
is not stored in the parent device. mlx5 SFs are an example of such a
device.
Multi-PF netdevs are still problematic (as they were before this
change). Upcoming patches will address this for the rx binding.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250827144017.1529208-5-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new API for getting a DMA device for a specific netdev queue.
This patch will allow io_uring zero-copy rx to work with devices
where the DMA device is not stored in the parent device. mlx5 SFs
are an example of such a device.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20250827144017.1529208-4-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For zerocopy (io_uring, devmem), there is an assumption that the
parent device can do DMA. However that is not always the case:
- Scalable Function netdevs [1] have the DMA device in the grandparent.
- For Multi-PF netdevs [2] queues can be associated to different DMA
devices.
This patch introduces the a queue based interface for allowing drivers
to expose a different DMA device for zerocopy.
[1] Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst
[2] Documentation/networking/multi-pf-netdev.rst
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250827144017.1529208-3-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- another small fix relevant to arm64 systems with memory encryption
(Shanker Donthineni)
- fix relevant to arm32 systems with non-standard CMA configuration
(Oreoluwa Babatunde)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaLAK7gAKCRCJp1EFxbsS
REDxAQC+5hLiyzc/1rR5EQb1D6Xr1f/0VN3IFz3creHp3juFBAEApi1iFMdmahO7
0YKG4KkzHpcNkGrxaXKP0VNtQsDLwww=
=fVrB
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.17-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
- another small fix for arm64 systems with memory encryption (Shanker
Donthineni)
- fix for arm32 systems with non-standard CMA configuration (Oreoluwa
Babatunde)
* tag 'dma-mapping-6.17-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma/pool: Ensure DMA_DIRECT_REMAP allocations are decrypted
of: reserved_mem: Restructure call site for dma_contiguous_early_fixup()
* printk cleanups in memblock and numa_memblks
* update kernel-doc for MEMBLOCK_RSRV_NOINIT to be more accurate and
detailed
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmiv6AwQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kR4SB/4u5L2tlpZaM2PzMqHVrdXDWNs7ntmRr97e
BA0fsIoSVtcqAEUkXiG+2x9cBuzJuiGOkSKOu28u7567zQji8rX3IAHaR1Uw1K+0
2mmzC3QxMjM6g7g310uA+agMAQlZne6ppiCEqyNnng3Uda8zZudL8NojOjtr3rJi
+ebiy5/2KR9DDV+758ZCQ4MmBGqnS5YLXu+xXbmnsPw7AqujSADskvrTLugii5qp
khQwTEX9foUR9kwAsrHPmqW560m2oWNf4eh3uxWtVxuCtbAnqC6uxVnaORW7UKaB
gLcOCinvBE6Le4sggJQvr6NpAJ1HcrXzA61CfBV9UUXNXb9obxDO
=xp5F
-----END PGP SIGNATURE-----
Merge tag 'fixes-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fixes from Mike Rapoport:
- printk cleanups in memblock and numa_memblks
- update kernel-doc for MEMBLOCK_RSRV_NOINIT to be more accurate and
detailed
* tag 'fixes-2025-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix kernel-doc for MEMBLOCK_RSRV_NOINIT
mm: numa,memblock: Use SZ_1M macro to denote bytes to MB conversion
mm/numa_memblks: Use pr_debug instead of printk(KERN_DEBUG)
- Merge two CONFIG_POWERPC64_CPU entries in Kconfig.cputype
- Replace extra-y to always-y in Makefile
- Cleanup to use dev_fwnode helper
- Fix misleading comment in kvmppc_prepare_to_enter()
- misc cleanup and fixes
Thanks to: Amit Machhiwal, Andrew Donnellan, Christophe Leroy, Gautam Menghani,
Jiri Slaby (SUSE), Masahiro Yamada, Shrikanth Hegde, Stephen Rothwell, Venkat
Rao Bagalkote, Xichao Zhao
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEqX2DNAOgU8sBX3pRpnEsdPSHZJQFAmiv5qEACgkQpnEsdPSH
ZJQeEA/+NahRLWuQM/dikXUo/Nje0/VSuQn4t/Yw8SUpqteBmGw84r8VZkxY0yu4
9Mmvi/7flStL59Nede94dEO7TJvOhcn7OD2X0gQpQl5ZaHD3z8oGmEnZ023tUin1
kzuEtsRTepU2ELEpqJCGzGNxV+Sxv+pqP7Okg65/u9HCUaq/1e89J5Km4rw4svx4
LLcs+FUAobbI7LV6SeKr877Ujp0dsLkSwvC/g4aqgszm4HbJi8WiD8QfTJYmzi6L
f4VzCzl+ox1ml+IpQKbQfjbAiB4MCIHc1mMCuK+A4VFmqGnlqk4/oeUmrNanRwSR
tDpeTka0HGO6dOIuf/G/Bc9bf23+dvKrH6NDpz4rI2mP88akedVMpLV9SmQXLZWy
UEnLCf4Ic3DeVGvlwlXd6C+0wAqjqu3ud9I640mlJhGAdPJ+NR0XHDFKP3hgxh7o
H8BQLBqm2CRDYOGFf8veY1u7EBsCTC0pjsvNrZa/IFzjOmZQJXwA4hG5sKkau3YG
yOMzylhjpSPOPl85jaKS5XrIzXLYhFgZ13jqf3NNx6Ydmrg89tR+3RGvqG+H0pi2
s/WQ+84Rw9hqzT7qOAQhUS1H7YHUOreeRrLZUVBl2SNXEh7Vw8ew1GkQJE7yMgsC
8gfrnnomxaMtg0GnxdQEm7pb0rmBujWCc1QBA6pZdgDhE+M8U0Y=
=+F44
-----END PGP SIGNATURE-----
Merge tag 'powerpc-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- Merge two CONFIG_POWERPC64_CPU entries in Kconfig.cputype
- Replace extra-y to always-y in Makefile
- Cleanup to use dev_fwnode helper
- Fix misleading comment in kvmppc_prepare_to_enter()
- misc cleanup and fixes
Thanks to Amit Machhiwal, Andrew Donnellan, Christophe Leroy, Gautam
Menghani, Jiri Slaby (SUSE), Masahiro Yamada, Shrikanth Hegde, Stephen
Rothwell, Venkat Rao Bagalkote, and Xichao Zhao
* tag 'powerpc-6.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/boot/install.sh: Fix shellcheck warnings
powerpc/prom_init: Fix shellcheck warnings
powerpc/kvm: Fix ifdef to remove build warning
powerpc: unify two CONFIG_POWERPC64_CPU entries in the same choice block
powerpc: use always-y instead of extra-y in Makefiles
powerpc/64: Drop unnecessary 'rc' variable
powerpc: Use dev_fwnode()
KVM: PPC: Fix misleading interrupts comment in kvmppc_prepare_to_enter()
Alexander Duyck says:
====================
fbnic: Synchronize address handling with BMC
The fbnic driver needs to communicate with the BMC if it is operating on
the RMII-based transport (RBT) of the same port the host is on. To enable
this we need to add rules that will route BMC traffic to the RBT/BMC and
the BMC and firmware need to configure rules on the RBT side of the
interface to route traffic from the BMC to the host instead of the MAC.
To enable that this patch set addresses two issues. First it will cause the
TCAM to be reconfigured in the event that the BMC was not previously
present when the driver was loaded, but the FW sends a notification that
the FW capabilities have changed and a BMC w/ various MAC addresses is now
present. Second it adds support for sending a message to the firmware so
that if the host adds additional MAC addresses the FW can be made aware and
route traffic for those addresses from the RBT to the host instead of the
MAC.
====================
Link: https://patch.msgid.link/175623715978.2246365.7798520806218461199.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MACDA TCAM can only be accessed by one entity at a time and as such we
cannot have simultaneous reads from the firmware to probe for changes from
the host. As such we have to send a message indicating what the state of
the MACDA is to the firmware when we updated it so that the firmware can
sync up the TCAMs it owns to route BMC packets to the host.
To support that we are adding a new message that is invoked when we write
the MACDA that will notify the firmware of updates from the host and allow
it to sync up the TCAM configuration to match the one on the host side.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623750782.2246365.9178255870985916357.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The BMC itself can decide to abandon a link and move onto another link in
the event of things such as a link flap. As a result the driver may load
with the BMC not present, and then needs to update things to support the
BMC being present while the link is up and the NIC is passing traffic.
To support this we add support to the watchdog to reinitialize the RPC to
support adding the BMC unicast, multicast, and multicast promiscuous
filters while the link is up and the NIC owns the link.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623750101.2246365.8518307324797058580.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To make the __fbnic_set_rx_mode and __fbnic_clear_rx_mode calls usable by
more points in the code we can make to that they expect a fbnic_dev pointer
instead of a netdev pointer.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623749436.2246365.6068665520216196789.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order for us to support the BMC possibly connecting, disconnecting, and
then reconnecting we need to be able to support entities outside of just
the NIC setting up promiscuous mode as the BMC can use a multicast
promiscuous setup.
To support that we should move the promisc_sync code out of the netdev and
into the RPC section of the driver so that it is reachable from more paths.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623748769.2246365.2130394904175851458.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Piotr Kubik says:
====================
Add Si3474 PSE controller driver
From: Piotr Kubik <piotr.kubik@adtran.com>
These patch series provide support for Skyworks Si3474 I2C Power
Sourcing Equipment controller.
Based on the TPS23881 driver code.
Supported features of Si3474:
- get port status,
- get port power,
- get port voltage,
- enable/disable port power
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
====================
Link: https://patch.msgid.link/6af537dc-8a52-4710-8a18-dcfbb911cf23@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a driver for the Skyworks Si3474 I2C Power Sourcing Equipment
controller.
Driver supports basic features of Si3474 IC:
- get port status,
- get port power,
- get port voltage,
- enable/disable port power.
Only 4p configurations are supported at this moment.
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/9b72c8cd-c8d3-4053-9c80-671b9481d166@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the Si3474 I2C Power Sourcing Equipment controller device tree
bindings documentation.
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/71a67c6f-6fce-49c7-96ec-554602dbd4f1@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet says:
====================
net: better drop accounting
Incrementing sk->sk_drops for every dropped packet can
cause serious cache line contention under DOS.
Add optional sk->sk_drop_counters pointer so that
protocols can opt-in to use two dedicated cache lines
to hold drop counters.
Convert UDP and RAW to use this infrastructure.
Tested on UDP (see patch 4/5 for details)
Before:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 615091 0.0
Udp6InErrors 3904277 0.0
Udp6RcvbufErrors 3904277 0.0
After:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 816281 0.0
Udp6InErrors 7497093 0.0
Udp6RcvbufErrors 7497093 0.0
====================
Link: https://patch.msgid.link/20250826125031.1578842-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a packet flood hits one or more RAW sockets, many cpus
have to update sk->sk_drops.
This slows down other cpus, because currently
sk_drops is in sock_write_rx group.
Add a socket_drop_counters structure to raw sockets.
Using dedicated cache lines to hold drop counters
makes sure that consumers no longer suffer from
false sharing if/when producers only change sk->sk_drops.
This adds 128 bytes per RAW socket.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-6-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a packet flood hits one or more UDP sockets, many cpus
have to update sk->sk_drops.
This slows down other cpus, because currently
sk_drops is in sock_write_rx group.
Add a socket_drop_counters structure to udp sockets.
Using dedicated cache lines to hold drop counters
makes sure that consumers no longer suffer from
false sharing if/when producers only change sk->sk_drops.
This adds 128 bytes per UDP socket.
Tested with the following stress test, sending about 11 Mpps
to a dual socket AMD EPYC 7B13 64-Core.
super_netperf 20 -t UDP_STREAM -H DUT -l10 -- -n -P,1000 -m 120
Note: due to socket lookup, only one UDP socket is receiving
packets on DUT.
Then measure receiver (DUT) behavior. We can see both
consumer and BH handlers can process more packets per second.
Before:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 615091 0.0
Udp6InErrors 3904277 0.0
Udp6RcvbufErrors 3904277 0.0
After:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 816281 0.0
Udp6InErrors 7497093 0.0
Udp6RcvbufErrors 7497093 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-5-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some sockets suffer from heavy false sharing on sk->sk_drops,
and fields in the same cache line.
Add sk->sk_drop_counters to:
- move the drop counter(s) to dedicated cache lines.
- Add basic NUMA awareness to these drop counter(s).
Following patches will use this infrastructure for UDP and RAW sockets.
sk_clone_lock() is not yet ready, it would need to properly
set newsk->sk_drop_counters if we plan to use this for TCP sockets.
v2: used Paolo suggestion from https://lore.kernel.org/netdev/8f09830a-d83d-43c9-b36b-88ba0a23e9b2@redhat.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Existing sk_drops_add() helper is renamed to sk_drops_skbadd().
Add sk_drops_add() and convert sk_drops_inc() to use it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to split sk->sk_drops in the future to reduce
potential contention on this field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The uAPI stddef header includes compiler_types.h, a kernel-only
header, to make sure that kernel definitions of annotations
like __counted_by() take precedence.
There is a hack in scripts/headers_install.sh which strips includes
of compiler.h and compiler_types.h when installing uAPI headers.
While explicit handling makes sense for compiler.h, which is included
all over the uAPI, compiler_types.h is only included by stddef.h
(within the uAPI, obviously it's included in kernel code a lot).
Remove the stripping from scripts/headers_install.sh and wrap
the include of compiler_types.h in #ifdef __KERNEL__ instead.
This should be equivalent functionally, but is easier to understand
to a casual reader of the code. It also makes it easier to work
with kernel headers directly from under tools/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250825201828.2370083-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 9e30ecf23b ("net: ipv4: fix incorrect MTU in broadcast routes")
introduced a regression where local-broadcast packets would have their
gateway set in __mkroute_output, which was caused by fi = NULL being
removed.
Fix this by resetting the fib_info for local-broadcast packets. This
preserves the intended changes for directed-broadcast packets.
Cc: stable@vger.kernel.org
Fixes: 9e30ecf23b ("net: ipv4: fix incorrect MTU in broadcast routes")
Reported-by: Brett A C Sheffield <bacs@librecast.net>
Closes: https://lore.kernel.org/regressions/20250822165231.4353-4-bacs@librecast.net
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250827062322.4807-1-oscmaes92@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When the driver is removed the clocks are disabled twice: once in
macb_remove and a second time by runtime pm. Disable wakeup in remove so
all the clocks are disabled and skip the second call to macb_clks_disable.
Always suspend the device as we always set it active in probe.
Fixes: d54f89af6c ("net: macb: Add pm runtime support")
Signed-off-by: Neil Mandir <neil.mandir@seco.com>
Co-developed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Link: https://patch.msgid.link/20250826143022.935521-1-sean.anderson@linux.dev
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A list of kernel header sync changes and two build-id fixes.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaK+XpwAKCRCMstVUGiXM
g/V4AP4keI7dTEyxgGYGDHZcqi0X5Tn/0FSOjtri2d2FNvbhfAEAigK1ogp6hLIU
gwEK8fbBRBKAFllr9o3AP6YzMR5dPAI=
=I/2T
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.17-2025-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf-tools fixes from Namhyung Kim:
"A number of kernel header sync changes and two build-id fixes"
* tag 'perf-tools-fixes-for-v6.17-2025-08-27' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf symbol: Add blocking argument to filename__read_build_id
perf symbol-minimal: Fix ehdr reading in filename__read_build_id
tools headers: Sync uapi/linux/vhost.h with the kernel source
tools headers: Sync uapi/linux/prctl.h with the kernel source
tools headers: Sync uapi/linux/fs.h with the kernel source
tools headers: Sync uapi/linux/fcntl.h with the kernel source
tools headers: Sync syscall tables with the kernel source
tools headers: Sync powerpc headers with the kernel source
tools headers: Sync arm64 headers with the kernel source
tools headers: Sync x86 headers with the kernel source
tools headers: Sync linux/cfi_types.h with the kernel source
tools headers: Sync linux/bits.h with the kernel source
tools headers: Sync KVM headers with the kernel source
perf test: Fix a build error in x86 topdown test
