When sun4i_backend_init_sat() calls reset_control_deassert() it
increments the deassert_count of the reset controller, and must
pair that with a reset_control_assert() call to decrement it.
In the error path where clk_prepare_enable() fails, the function
returns immediately without calling reset_control_assert(), leaking
the reference count. Other error paths, like the devm_clk_get()
failure, correctly jump to the err_assert_reset label which performs
the missing assert.
Fix the leak by using the existing err_assert_reset label in the
clk_prepare_enable error path instead of returning directly.
Cc: stable@vger.kernel.org
Fixes: 440d2c7b12 ("drm/sun4i: backend: Handle the SAT")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260607030950.83636-1-vulab@iscas.ac.cn
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Simple KMS helper are deprecated since they only add an intermediate
layer between drivers and the atomic modesetting.
This patch removes the dependency on drm simple helpers from sun4i
DRM drivers.
Signed-off-by: Diogo Silva <diogompaissilva@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20260623-sun4i_simple-v1-1-fa6696df1fad@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
On partial screen updates, SSD133X controllers expect to get the
rectangle addresses as arguments of the "Set Column Address" and "Set
Row Address" commands. Each command expects the start address and end
address of the row/column in absolute format, however the end
addresses were being sent in a relative format (relative to the start
address).
The relative end addresses work only when the start address is 0. In
those situations, there is no value difference between relative and
absolute addresses.
Fixes: b4299c936d ("drm/ssd130x: Add support for the SSD133x OLED controller family")
Cc: stable@vger.kernel.org
Signed-off-by: Amit Barzilai <amit.barzilai22@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260622122604.32500-4-amit.barzilai22@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
The ssd132x_update_rect had to calculate the column address twice in
the same function by dividing the byte address and the segment_width.
Optimize this by hoisting the result into a col variable.
Renamed the "y" variable to "row" to match the change made in the x
axis.
Signed-off-by: Amit Barzilai <amit.barzilai22@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260622122604.32500-3-amit.barzilai22@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
On partial screen updates, SSD132X controllers expect to get the
rectangle addresses as arguments of the "Set Column Address" and "Set
Row Address" commands. Each command expects the start address and end
address of the row/column in absolute format, however the end
addresses were being sent in a relative format (relative to the start
address).
The relative end addresses work only when the start address is 0. In
those situations, there is no value difference between relative and
absolute addresses.
Fixes: fdd591e00a ("drm/ssd130x: Add support for the SSD132x OLED controller family")
Cc: stable@vger.kernel.org
Signed-off-by: Amit Barzilai <amit.barzilai22@gmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260622122604.32500-2-amit.barzilai22@gmail.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
commit 4827d6d83f ("drm/sched: Remove racy hack from
drm_sched_fini()") removed the necessity to mark an entity as stopped in
drm_sched_fini(). The documentation, however, still details that.
Update sched_entity's documentation.
Acked-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://patch.msgid.link/20260629083631.2547199-2-phasta@kernel.org
In rocket_job_run(), after taking an extra fence reference for
job->done_fence via dma_fence_get(), the error paths have three bugs:
- The dma_fence reference held by job->done_fence is never released,
causing a reference leak.
- pm_runtime_get_sync() increments the usage counter even on failure,
but the error path does not decrement it, leaking the runtime PM
reference and preventing the NPU from suspending.
- A valid but unsignaled fence is returned to the DRM scheduler,
which triggers WARN("Fence ... released with pending signals!")
when the scheduler drops its reference.
Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get()
which auto-balances the usage counter on failure, releasing both fence
references on error, and returning ERR_PTR(ret) instead of the
unsignaled fence.
Cc: stable@vger.kernel.org
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
Signed-off-by: ZhaoJinming <zhaojinming@uniontech.com>
Link: https://lore.kernel.org/r/20260610071045.3414828-1-zhaojinming@uniontech.com
[tomeu: Refactored error paths to use consolidated goto labels]
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
rocket_job_push() allocates a temporary array to hold all input and
output GEM object pointers:
bos = kvmalloc_array(job->in_bo_count + job->out_bo_count,
sizeof(void *), GFP_KERNEL);
memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *));
memcpy(&bos[job->in_bo_count], job->out_bos, ...);
Two bugs exist:
1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and
the subsequent memcpy() dereferences it, causing a kernel NULL
pointer dereference.
2. Integer overflow: in_bo_count and out_bo_count are both u32, set
directly from userspace-supplied in_bo_handle_count and
out_bo_handle_count with no prior validation. Their sum is computed
in u32 arithmetic and can wrap to a smaller value, causing the
allocation count passed to kvmalloc_array() to be smaller than
intended. Subsequent uses still operate on the original counts when
copying and locking objects, which may lead to out-of-bounds accesses
on the temporary array.
Fix by using check_add_overflow() to detect count overflow before the
allocation, and adding a NULL check on the allocation result.
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Link: https://lore.kernel.org/r/20260524155716.90955-1-meatuni001@gmail.com
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
rocket_ioctl_submit_job() releases rjob through rocket_job_put() on
allocation error paths. rocket_job_cleanup() unconditionally calls
rocket_iommu_domain_put(job->domain), but job->domain is assigned only
after task copying and BO lookups. A failure before that assignment can
therefore clean up a job with a NULL domain pointer.
Take the per-file domain reference before the first error path can release
rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so
the common cleanup path cannot free the task array again after a task-copy
error.
Fixes: 0810d5ad88 ("accel/rocket: Add job submission IOCTL")
Cc: stable@vger.kernel.org
Signed-off-by: Shuvam Pandey <shuvampandey1@gmail.com>
Link: https://lore.kernel.org/r/6a454b48.6a8fa39a.27019b.984b@mx.google.com
Signed-off-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
When a new mapping intersects with an existing GPU VA, but either
end lies before or beyond the existing VA's edges, then the prev
and next mapping operations part of a remap will reflect this
condition by being set to NULL.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Link: https://patch.msgid.link/20260608-gpuvm-minor-fixes-v2-2-af07ef9ca969@collabora.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
The DW HDMI QP TX library was developed for and is currently only used
by Rockchip platforms. Add it to the Rockchip DRM drivers section to
ensure all relevant parties are kept in the loop on any changes.
As its file paths fall outside the generic wildcard patterns defined in
the ARM/Rockchip SoC support section, also add the
linux-rockchip@lists.infradead.org mailing list to avoid any
notification gaps.
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260612-maintainers-rk-drm-upd-v2-1-3ff65fc41a93@collabora.com
Replace hardcoded fixed usleep_range() delays during clock recovery and
channel equalization with drm_dp_link_train_clock_recovery_delay()
and drm_dp_link_train_channel_eq_delay() helpers.
The original fixed delays are only valid for the case where bit[6:0] of
DPCD TRAINING_AUX_RD_INTERVAL(0000Eh) is 0x00, while core helpers apply
spec-compliant timings matching actual receiver capability values.
Additionally, add dpcd buffer to struct analogix_dp_device to cache
receiver capabilities. Call drm_dp_read_dpcd_caps() at commit entry to
populate cached DPCD data for subsequent link training steps, and
prepare for further usage of other DP helper APIs.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260623075207.320603-1-damon.ding@rock-chips.com
Enable display compression (DSC v1.2) for 1080x2400 Visionox
VTDR6130 AMOLED DSI panel.
This panel is the default panel for the following devices:
- SM8550-QRD
- SM8550-HDK
- SM8650-QRD
- SM8650-HDK
Enable DSC since now functional in the MSM/DPU/DSI driver.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260703-topic-sm8x50-vtdr6130-dsc-v4-1-9eff51ec717a@linaro.org
Add a DRM panel driver for the DLC DLC0697 1080x1920@60Hz MIPI DSI
panel based on the Ilitek ILI7807S display controller.
The panel operates in video burst mode with four data lanes using
RGB888 pixel format.
Signed-off-by: Arpit Saini <arpit.saini@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260701-ili7807s-v4-2-c7d76d4780a5@oss.qualcomm.com
ILI7807S is a DSI display controller used to drive MIPI-DSI panels.
The DLC DLC0697 1080x1920 LCD panel is based on this controller.
The panel requires a reset GPIO, I/O voltage supply (vddi), positive
LCD bias supply (avdd) and negative LCD bias supply (avee). The panel
operates in video burst mode with four data lanes using RGB888 pixel
format.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Arpit Saini <arpit.saini@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260701-ili7807s-v4-1-c7d76d4780a5@oss.qualcomm.com
The num_fences, count, i, and j variables in dma_fence_dedup_array() and
__dma_fence_unwrap_merge() have inconsistent integer types, mixing both
unsigned int and int.
Use type size_t consistently for these instead, and update the return
type of dma_fence_dedup_array() accordingly.
Signed-off-by: Shahyan Soltani <shahyan.soltani@amd.com>
Suggested-by: Philipp Stanner <phasta@mailbox.org>
Link: https://lore.kernel.org/r/20260630160401.67544-1-shahyan.soltani@amd.com
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
lcdif_attach_bridge() uses dev_err_probe() on all its error returns to
store a specific deferral message.
However its caller lcdif_load() calls dev_err_probe() again on error,
overwriting the specific deferral messages with a unique, unavoidably
generic, message.
Make the specific deferral message visible by using a plain 'return ret' on
the caller.
Acked-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260619-drm-lcdif-deferral-msg-v1-1-ce2392dca985@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Dropping the _sw_ part from the names was proposed multiple times now and
IIRC people generally agreed with the idea already.
The function requests a fence to signal and triggers some sort of HW
interaction on most backends.
So this is not really software related at all and the callback is already
just named enable_signaling as well.
Just streamline that and use a consistent name everywhere.
Assisted-by: Claude Sonet 4
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20260624122917.2483-2-christian.koenig@amd.com
I'm leaving Imagination; remove myself as a maintainer. A separate patch
leaves a personal forwarding address in the .mailmap.
Acked-by: Matt Coster <opensource@mtcoster.net>
Acked-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260629-goodbye-v1-2-3bab53a80c53@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
I'm leaving Imagination; remove myself as a maintainer but leave
a personal forwarding address.
Acked-by: Matt Coster <opensource@mtcoster.net>
Acked-by: Alessio Belle <alessio.belle@imgtec.com>
Link: https://patch.msgid.link/20260629-goodbye-v1-1-3bab53a80c53@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
This commit fixes the NULL pointer dereference issue that would have
happened on the split of GPU mapping due to partial unmap of an evicted
BO. There is a logic to handle the partial unmap of huge pages when the
GPU mapping is split. That logic was not being completely skipped for
the VMA of an evicted BO and that resulted in a NPD possibility for the
'bo->backing.pages' pointer, which is set to NULL when pages of a
BO are released on eviction.
Following dump was seen when a partial unmap was exercised for an
evicted BO.
Unable to handle kernel paging request at virtual address 0000000000002000
Mem abort info:
ESR = 0x0000000096000004
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x04: level 0 translation fault
Data abort info:
ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 4k pages, 48-bit VAs, pgdp=00000008842e8000
[0000000000002000] pgd=0000000000000000, p4d=0000000000000000
Internal error: Oops: 0000000096000004 [#1] SMP
<snip>
pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : iova_mapped_as_huge_page+0x20/0x68 [panthor]
lr : panthor_gpuva_sm_step_remap+0x39c/0x498 [panthor]
sp : ffff800086193920
x29: ffff800086193920 x28: ffff800086193a18 x27: ffff800086193b80
x26: 0000000000400000 x25: 0000000000810000 x24: 0000000000400000
x23: ffff000808af1800 x22: 0000000000a00000 x21: ffff800086193a00
x20: ffff000806fd3f00 x19: 0000000000410000 x18: 00000000ffffffff
x17: 0000000000000000 x16: 0000000000000000 x15: ffff800083ce2d83
x14: 0000000000000000 x13: 3120646574636976 x12: 6520303030303138
x11: 2d30303030313420 x10: ffff8000836e6c80 x9 : ffff80007bfc889c
x8 : 3fffffffffffefff x7 : ffff8000836e6c80 x6 : 0000000000000000
x5 : ffff00097ef19088 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000010000 x1 : 0000000000000400 x0 : 0000000000000000
Call trace:
iova_mapped_as_huge_page+0x20/0x68 [panthor] (P)
op_remap_cb.isra.0+0x70/0xb0
__drm_gpuvm_sm_unmap+0xf8/0x1c0
drm_gpuvm_sm_unmap+0x40/0x60
panthor_vm_exec_op+0xa0/0x168 [panthor]
panthor_vm_bind_exec_sync_op+0x8c/0xb8 [panthor]
panthor_ioctl_vm_bind+0xbc/0x170 [panthor]
drm_ioctl_kernel+0xc0/0x140
drm_ioctl+0x20c/0x500
__arm64_sys_ioctl+0xb4/0x118
invoke_syscall+0x5c/0x120
el0_svc_common.constprop.0+0x48/0xf8
do_el0_svc+0x28/0x40
el0_svc+0x38/0x128
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x198/0x1a0
Code: 8b030021 cb020021 f940b800 d34cfc21 (f8617801)
---[ end trace 0000000000000000 ]---
v2: Fix indentation
Fixes: 8e7460eac7 ("drm/panthor: Support partial unmaps of huge pages")
Signed-off-by: Akash Goel <akash.goel@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260623130119.2737003-1-akash.goel@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
virtio_gpu_init() sends GET_DISPLAY_INFO when scanouts are present and
waits for display_info_pending to clear. If the response never arrives,
the wait result is ignored and probe still succeeds.
Return -ETIMEDOUT on display-info timeout. Because this happens after
virtio_device_ready(), reset the device and tear down modesetting before
using the existing vbuf and virtqueue cleanup path.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/735301/
[dmitry.osipenko@collabora.com: rebase on misc-next]
The size of the mmap'ed framebuffer could be smaller than the minimum
required framebuffer size. Validate the resource size against the
framebuffer size.
Buggy firmware that triggers this check should be fixed up with a quirk
on a case-by-case base.
v3:
- fix size checks (Sashiko)
- improve error message for alignment check (Thierry)
- do not store aligned size value
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Suggested-by: Sashiko <sashiko-bot@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260625094509.157581-6-tzimmermann@suse.de
Validate the computed stride against the maximum value INT_MAX.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 7bfa5c7b28 ("drm/simpledrm: Compute linestride with drm_format_info_min_pitch()")
Cc: <stable@vger.kernel.org> # v6.1+
Link: https://patch.msgid.link/20260625094509.157581-5-tzimmermann@suse.de
The helper simplefb_get_validated_int() is only a wrapper around
drm_sysfb_get_validated_int(). Inline the function into its callers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260625094509.157581-4-tzimmermann@suse.de
Validate the panel size from the device-tree node against the
limitations of struct drm_display_mode. The type only stores sizes
in 16-bit fields. Fail transparently on errors; do not warn.
v3:
- move comments to a more prominent place (Thierry)
v2:
- only use initialized values in debugging output (Sashiko)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 2a6d731a8f ("drm/simpledrm: Allow physical width and height configuration via panel node")
Cc: Rayyan Ansari <rayyan@ansari.sh>
Cc: <stable@vger.kernel.org> # v6.4+
Link: https://patch.msgid.link/20260625094509.157581-3-tzimmermann@suse.de
Validate the framebuffer size from the firmware against the
limitations of struct drm_display_mode. The type only stores sizes
in 16-bit fields. Fail probing on errors.
v2:
- remove unused function simplefb_get_validated_int0() (Sashiko)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Cc: <stable@vger.kernel.org> # v5.14+
Fixes: 11e8f5fd22 ("drm: Add simpledrm driver")
Link: https://patch.msgid.link/20260625094509.157581-2-tzimmermann@suse.de
Mark CONFIG_SYSFB_SIMPLEFB as deprecated. Enabling it allows to
run simpledrm and simplefb on EFI/VESA framebuffers. Doing this
is discouraged in favor of using efidrm and vesadrm.
v2:
- resolve conflicting help texts (Sashiko)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260625065724.15794-1-tzimmermann@suse.de
lima_vm_create() is currently run before va_start and va_end are set up,
meaning they are both 0. lima_vm_create() runs drm_mm_init() with them
as arguments for the allocator, and if DRM_DEBUG_MM is enabled the
DRM_MM_BUG_ON check in drm_mm_init then fires, as seen here on
exynos4412-odroid-u2:
[ 1.736297] ------------[ cut here ]------------
[ 1.740370] kernel BUG at drivers/gpu/drm/drm_mm.c:931!
[ 1.745574] Internal error: Oops - BUG: 0 [#1] SMP ARM
[ 1.750697] Modules linked in:
[ 1.753734] CPU: 0 UID: 0 PID: 41 Comm: kworker/u16:1 Not tainted 7.0.10-postmarketos-exynos4 #11 PREEMPT
[ 1.763372] Hardware name: Samsung Exynos (Flattened Device Tree)
[ 1.769446] Workqueue: events_unbound deferred_probe_work_func
[ 1.775261] PC is at drm_mm_init+0x9c/0xa4
[ 1.779339] LR is at lima_vm_create+0x144/0x17c
[ ... ]
Fix the issue by moving the lima_vm_create() call after va_start and
va_end are set up.
Fixes: a1d2a63399 ("drm/lima: driver for ARM Mali4xx GPUs")
Signed-off-by: Henrik Grimler <henrik.grimler@axis.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patch.msgid.link/20260601-lima-alloc-fix-v1-1-16d3f3b7b780@axis.com
Wire up the newly parsed panel_type from drm_display_info into
amdgpu_dm's panel type detection path. When neither the AMD VSDB
nor DPCD determines the panel type, fall back to the DisplayID
Display Device Technology field to set PANEL_TYPE_LCD or
PANEL_TYPE_OLED accordingly. Also expose LCD to userspace via
the panel_type connector property.
Assisted-by: Copilot:Claude-Opus-4.6
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260526030254.1460480-4-chen-yu.chen@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Parse the Display Parameters Data Block (tag 0x21) defined in
DisplayID v2.1a Section 4.2.6. Extract the Display Device Technology
field from the color depth and device technology byte, which indicates
whether the panel uses LCD or OLED technology.
Add a panel_type field to struct drm_display_info and populate it
during DisplayID iteration so downstream drivers can use it for
panel-type-dependent behavior. Add DRM_MODE_PANEL_TYPE_LCD to the UAPI
panel type property alongside the existing OLED value.
Assisted-by: Copilot:Claude-Opus-4.6
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260526030254.1460480-3-chen-yu.chen@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
Extract the DisplayID base section header logging and non_desktop
detection from update_displayid_info() into a dedicated helper,
drm_displayid_process_base_section_header(). Remove the break so the
iterator walks through all data blocks, preparing for future patches
that will parse additional block types within the loop.
The helper is called only once for the base section via a
base_section_header_processed flag. Since version and primary_use are
only captured from the base section, and extension sections carry a
primary use of zero per spec, the non_desktop logic is unaffected.
No functional change.
Assisted-by: Copilot:Claude-Opus-4.6
Signed-off-by: Chenyu Chen <chen-yu.chen@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20260526030254.1460480-2-chen-yu.chen@amd.com
Signed-off-by: Mario Limonciello <superm1@kernel.org>
These entries were previously unaligned with MAINTAINERS, but will be
even more so now that entries are being changed there. Bring them in
sync by replacing the list here with the updated one from MAINTAINERS.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Acked-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Link: https://patch.msgid.link/20260626-maintainer-updates-v2-3-e1b3f246c44c@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
New people are taking up maintainership roles within the team.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Acked-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Link: https://patch.msgid.link/20260626-maintainer-updates-v2-2-e1b3f246c44c@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
There's a bunch of useful information missing from this entry, flesh it
out and simplify the dt-bindings pattern while we're at it.
Reviewed-by: Frank Binns <frank.binns@imgtec.com>
Reviewed-by: Alessio Belle <alessio.belle@imgtec.com>
Acked-by: Luigi Santivetti <luigi.santivetti@imgtec.com>
Link: https://patch.msgid.link/20260626-maintainer-updates-v2-1-e1b3f246c44c@imgtec.com
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
device removal, along with documentation fixes and minor AMD driver
cleanups.
-----BEGIN PGP SIGNATURE-----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=V3cD
-----END PGP SIGNATURE-----
Merge tag 'ntb-7.2' of https://github.com/jonmason/ntb
Pull NTB updates from Jon Mason:
"An EPF bug fix to prevent an invalid unmap during device removal,
along with documentation fixes and minor AMD driver cleanups"
* tag 'ntb-7.2' of https://github.com/jonmason/ntb:
ntb: amd: Use named initializer for pci_device_id::driver_data
NTB: fix kernel-doc warnings in ntb.h
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
ntb_hw_amd: Fix incorrect debug message in link disable path
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in
F30 and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCakCsxwAKCRBAj56VGEWX
nCICAQDSgfrAi+4SqTb92EjtdQO+ypluS42mKO75LTitJcS8dAEA1iKmdss8mGww
c4ai4W+UFxori7IqgkoQ7LfaPTOWlA0=
=QP4c
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull more input updates from Dmitry Torokhov:
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in F30
and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
* tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gscps2 - advance receive buffer write index
Input: rmi4 - tolerate short register descriptor structure
Revert "Input: rmi4 - fix register descriptor address calculation"
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
Two more fixes that I managed to put into the public branch merged into
next before my first PR but missed to include them in it. The first
change is a relevant change that fixes misconfigurations due to a
variable overflow. The 2nd is only cosmetic but very obviously an
improvement.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEP4GsaTp6HlmJrf7Tj4D7WH0S/k4FAmpAE2gACgkQj4D7WH0S
/k7tnAgAsjkBQWoav1MF8kyVzew+iIuVvBrtUPimzeMs2gzwC1czi/TPKCvZxGND
XaPESmf51lC9AZuFd/2Wfvb2GydxA/wmsbVB0Q6ZBwLtS6/L4yiv3DpYN2to9yWN
QvVHeVCBdSbMHOQXdG0iFbhMiLyUX5YwCwyZT2cuVUHb4gvNLuDuKbgSXX9Odh1R
/p9C0afNMbdxuj2yRy+S8CM5Rl5v4yfBw6cswKX6w3uA+LnvksWuC8og7tEfFa/F
Vdwy4csWeKHGm7jEP9o6iSlWYy+DMKf5Llop+yFLZV6Db6AXMlEpNOXJsGxEv95y
qMTQFCGhepNWqVuUDDOOeUs60Asjpg==
=0WY9
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux
Pull pwm fixes from Uwe Kleine-König:
"Two more fixes that I managed to put into the public branch merged
into next before my first pull request but missed to include them in
it.
The first change is a relevant change that fixes misconfigurations due
to a variable overflow. The second is only cosmetic but very obviously
an improvement"
* tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: rzg2l-gpt: Add missing newlines to dev_err_probe() messages
pwm: rzg2l-gpt: Fix period_ticks type from u32 to u64
Fixes:
- fbcon: fix NULL pointer dereference for a console without vc_data [Ian Bridges]
- fbdev: fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var [Ian Bridges]
Fixes in failure paths:
- pm2fb: unwind write-cache setting on probe failure [Haoxiang Li]
- goldfishfb: fail pan display on base-update timeout [Pengpeng Hou]
- viafb: return error on DMA copy time-out [Pengpeng Hou]
- fbcon: fix out-of-bounds read in error path of fbcon_do_set_font() [Mingyu Wang]
- fbdev: fix modelist use-after-free in store_modes() [Ian Bridges]
Code cleanup:
- vga16fb: clean up platform_device_id table [Uwe Kleine-König]
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCakAKnwAKCRD3ErUQojoP
X27+AQCPvMJUMScjO1dlGKkPnnIFiOWCU6AW1aM2m6T+qWrCTQEAnNi5CCI3JiLi
6NCcyPm7/4R6tSXDm+UcWJ5tyzaNvww=
=EBHb
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull more fbdev updates from Helge Deller:
"Fixes for generic fbdev & fbcon code for the handling of modelists
and preventing a potential NULL ptr dereference in the console code.
Fix missed cleanups in the error path of various fbdev drivers.
And Uwe Kleine-König contributed a cleanup patch to use named
initializers in the vga16fb driver"
* tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
fbcon: fix NULL pointer dereference for a console without vc_data
fbdev: fix use-after-free in store_modes()
fbdev: viafb: return an error when DMA copy times out
fbdev: goldfishfb: fail pan display on base-update timeout
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
fbdev: pm2fb: unwind WC setup on probe failure
fbdev: vga16fb: Drop unused assignment of platform_device_id driver data
A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments caiaq
/ Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight
-----BEGIN PGP SIGNATURE-----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=hJ5w
-----END PGP SIGNATURE-----
Merge tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
