During VF post-migration recovery, MMIO communication channel to GuC
is used, despite CTB channel being enabled. This behavior is rooted
in the save-restore architecture specification.
Therefore, a VF driver cannot assert that CTB is disabled while sending
MMIO messages to GuC. Such assertion needs to be PF only, or be removed.
This patch simply removes the assertion.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Suggested-by: Michał Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107151357.1623733-2-tomasz.lis@intel.com
The GGTT looks to be stored inside stolen memory on igpu which is not
treated as normal RAM. The core kernel skips this memory range when
creating the hibernation image, therefore when coming back from
hibernation the GGTT programming is lost. This seems to cause issues
with broken resume where GuC FW fails to load:
[drm] *ERROR* GT0: load failed: status = 0x400000A0, time = 10ms, freq = 1250MHz (req 1300MHz), done = -1
[drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01
[drm] *ERROR* GT0: firmware signature verification failed
[drm] *ERROR* CRITICAL: Xe has declared device 0000:00:02.0 as wedged.
Current GGTT users are kernel internal and tracked as pinned, so it
should be possible to hook into the existing save/restore logic that we
use for dgpu, where the actual evict is skipped but on restore we
importantly restore the GGTT programming. This has been confirmed to
fix hibernation on at least ADL and MTL, though likely all igpu
platforms are affected.
This also means we have a hole in our testing, where the existing s4
tests only really test the driver hooks, and don't go as far as actually
rebooting and restoring from the hibernation image and in turn powering
down RAM (and therefore losing the contents of stolen).
v2 (Brost)
- Remove extra newline and drop unnecessary parentheses.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3275
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241101170156.213490-2-matthew.auld@intel.com
In order to uniquely identify the jobs, xe_sched_job tracepoints need
to have the tuple (gt_id, guc_id). Find a "hole" where the next entry is
unaligned and add one more field.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241107060606.3130885-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Local values of scheduling priorities need to be adjusted when
changing the schedule_if_idle policy as those are related.
Disabling schedule_if_idle policy forces the low priority, and
enabling schedule_if_idle policy forces the normal priority.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106151301.2079-6-michal.wajdeczko@intel.com
Add 'sched_priority' attribute that will represents the scheduling
prority of the VF or PF. Values {0,1,2} correspond to priorities
{LOW,NORMAL,HIGH} respectively.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lukasz Laguna <lukasz.laguna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106151301.2079-5-michal.wajdeczko@intel.com
In couple of places the wrong error handling goto was used to release
locks. Fix these to ensure all locks dropped on exec IOCTL errors.
Cc: Francois Dugast <francois.dugast@intel.com>
Fixes: d16ef1a18e ("drm/xe/exec: Switch hw engine group execution mode upon job submission")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106224944.30130-1-matthew.brost@intel.com
GuC uses GUC_ID_UNKNOWN if it can not map the CAT fault to any
context. We shouldn't treat that as G2H protocol error that would
justify a GT reset, as it may happen due to some VF activity.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105204557.1991-1-michal.wajdeczko@intel.com
While highly unlikely, incoming G2H message might be too short
so we shouldn't read any data from it prior to checking a length.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105173032.1947-4-michal.wajdeczko@intel.com
We are now logging details of the failed G2H message (including
its length) at the GuC CT component. Drop now redundant log from
the GuC submit code.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105173032.1947-3-michal.wajdeczko@intel.com
We are already logging an error once we failed to process a G2H
message, but then it's quite hard to extract the content of the
broken G2H message from the captured snapshot. Extend our error
log with the raw hexdump of the G2H message.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105173032.1947-2-michal.wajdeczko@intel.com
If another VF migration happened during post-migration recovery,
then the current worker should be finished to allow the next
one start swiftly and cleanly.
Check for defer in two places: before fixups, and before
sending RESFIX_DONE.
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-6-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
During post-migration recovery, only MMIO communication to GuC is
allowed. The VF KMD needs to use that channel to ask for the new
provisioning, which includes a new GGTT range assigned to the VF.
v2: query config only instead of handshake; no need to get pm ref as
it's now kept through whole recovery (Michal)
v3: switched names of 'err' and 'ret' (Michal)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-5-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
After restore, GuC will not answer to any messages from VF KMD until
fixups are applied. When that is done, VF KMD sends RESFIX_DONE
message to GuC, at which point GuC resumes normal operation.
This patch implements sending the RESFIX_DONE message at end of
post-migration recovery.
v2: keep pm ref during whole recovery, style fixes (Michal)
v3: assert removal to separate patch, debug message per GuC instead
of one, comments changes (Michal)
v4: improve one debug message (Michal)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-4-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
This adds a documentation chapter, containing high level flow
of VF restore procedure.
v2: Better describe initial conditions, include GuC states on
sequence diagram (Michal)
v3: moved DOC to .c (Michal)
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-3-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
To properly support VF Save/Restore procedure, fixups need to be
applied after PF driver finishes its part of VF Restore. The fixups
are required to adjust the ongoing execution for a hardware switch
that happened, because some GFX resources are not fully virtualized,
and assigned to a VF as range from a global pool. The VF on which
a VM is restored will often have different ranges provisioned than
the VF on which save process happened. Those resource fixups are
applied by the VF driver within a restored VM.
A VF driver gets informed that it was migrated by receiving an
interrupt from each GuC. The interrupt assigned for that purpose
is "GUC SW interrupt 0". Seeing that fields set from within the
irq handler should be the trigger for fixups.
The VF can safely do post-migration fixups on resources associated
to each GuC only after that GuC issued the MIGRATED interrupt.
This change introduces a worker to be used for post-migration fixups,
and a mechanism to schedule said worker when all GuCs sent the irq.
v2: renamed and moved functions, updated logged messages, removed
unused includes, used anon struct (Michal)
v3: ordering, kerneldoc, asserts, debug messages,
on_all_tiles -> on_all_gts (Michal)
v4: fixed missing header include
v5: Explained what fixups are, explained which IRQ is used, style
fixes (Michal)
Bspec: 50868
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104213449.1455694-2-tomasz.lis@intel.com
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reword documentation to possibly what it meant to be.
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-4-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The exec queue timestamp is only really useful when it's being queried
through the fdinfo. There's no need to update it so often, on every
job_free. Tracing a simple app like vkcube running shows an update
rate of ~ 120Hz. In case of discrete, the BO is on vram, creating a lot
of pcie transactions.
The update on job_free() is used to cover a gap: if exec
queue is created and destroyed rapidly, before a new query, the
timestamp still needs to be accumulated and accounted for in the xef.
Initial implementation in commit 6109f24f87 ("drm/xe: Add helper to
accumulate exec queue runtime") couldn't do it on the exec_queue_fini
since the xef could be gone at that point. However since commit
ce8c161cba ("drm/xe: Add ref counting for xe_file") the xef is
refcounted and the exec queue always holds a reference, making this safe
now.
Improve the fix in commit 2149ded630 ("drm/xe: Fix use after free when
client stats are captured") by reducing the frequency in which the
update is needed.
Fixes: 2149ded630 ("drm/xe: Fix use after free when client stats are captured")
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Help debugging when LRC timestamp is updated for a exec queue.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104143815.2112272-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
In unlikely event that we fail during sending the new VF GGTT
configuration to the GuC, we will free only the GGTT node data
struct but will miss to release the actual GGTT allocation.
This will later lead to list corruption, GGTT space leak and
finally risking crash when unloading the driver:
[ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-EIO)
[ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT
[ ] list_add corruption. next->prev should be prev (ffff88813cfcd628), but was 0000000000000000. (next=ffff88813cfe2028).
[ ] RIP: 0010:__list_add_valid_or_report+0x6b/0xb0
[ ] Call Trace:
[ ] drm_mm_insert_node_in_range+0x2c0/0x4e0
[ ] xe_ggtt_node_insert+0x46/0x70 [xe]
[ ] pf_provision_vf_ggtt+0x7f5/0xa70 [xe]
[ ] xe_gt_sriov_pf_config_set_ggtt+0x5e/0x770 [xe]
[ ] ggtt_set+0x4b/0x70 [xe]
[ ] simple_attr_write_xsigned.constprop.0.isra.0+0xb0/0x110
[ ] ... [drm] GT0: PF: Failed to provision VF1 with 1073741824 (1.00 GiB) GGTT (-ENOSPC)
[ ] ... [drm] GT0: PF: VF1 provisioning remains at 0 (0 B) GGTT
[ ] Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b7b: 0000 [#1] PREEMPT SMP NOPTI
[ ] RIP: 0010:drm_mm_remove_node+0x1b7/0x390
[ ] Call Trace:
[ ] <TASK>
[ ] ? die_addr+0x2e/0x80
[ ] ? exc_general_protection+0x1a1/0x3e0
[ ] ? asm_exc_general_protection+0x22/0x30
[ ] ? drm_mm_remove_node+0x1b7/0x390
[ ] ggtt_node_remove+0xa5/0xf0 [xe]
[ ] xe_ggtt_node_remove+0x35/0x70 [xe]
[ ] xe_ttm_bo_destroy+0x123/0x220 [xe]
[ ] intel_user_framebuffer_destroy+0x44/0x70 [xe]
[ ] intel_plane_destroy_state+0x3b/0xc0 [xe]
[ ] drm_atomic_state_default_clear+0x1cd/0x2f0
[ ] intel_atomic_state_clear+0x9/0x20 [xe]
[ ] __drm_atomic_state_free+0x1d/0xb0
Fix that by using pf_release_ggtt() on the error path, which now
works regardless if the node has GGTT allocation or not.
Fixes: 34e804220f ("drm/xe: Make xe_ggtt_node struct independent")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104144901.1903-1-michal.wajdeczko@intel.com
Upon failure all locks need to be dropped before returning to the user.
Fixes: 58480c1c91 ("drm/xe: Skip VMAs pin when requesting signal to the last XE_EXEC")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105043524.4062774-3-matthew.brost@intel.com
In a couple of places after an exec queue is looked up the exec IOCTL
returns on input errors without dropping the exec queue ref. Fix this
ensuring the exec queue ref is dropped on input error.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241105043524.4062774-2-matthew.brost@intel.com
Add a documentation page to detail the device coredump as implemented by
xe - it was documented in the source code, but not visible in the
rendered (html) documentation.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241102161254.1818604-3-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Let the introduction be useful for both userspace and kernel. Also
improve the formatting to wire up later to the documentation build.
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241102161254.1818604-2-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
If CONFIG_DRM_USE_DYNAMIC_DEBUG is set, 'drm_dbg' function is replaced
with '__dynamic_func_call_cls', which is replaced with a do while
statement. So in the previous code, there are the following build
errors.
include/linux/dynamic_debug.h:221:58: error: expected expression before ‘do’
221 | #define __dynamic_func_call_cls(id, cls, fmt, func, ...) do { \
| ^~
include/linux/dynamic_debug.h:248:9: note: in expansion of macro ‘__dynamic_func_call_cls’
248 | __dynamic_func_call_cls(__UNIQUE_ID(ddebug), cls, fmt, func, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~~~~~
include/drm/drm_print.h:425:9: note: in expansion of macro ‘_dynamic_func_call_cls’
425 | _dynamic_func_call_cls(cat, fmt, __drm_dev_dbg, \
| ^~~~~~~~~~~~~~~~~~~~~~
include/drm/drm_print.h:504:9: note: in expansion of macro ‘drm_dev_dbg’
504 | drm_dev_dbg((drm) ? (drm)->dev : NULL, DRM_UT_DRIVER, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~
include/drm/drm_print.h:522:33: note: in expansion of macro ‘drm_dbg_driver’
522 | #define drm_dbg(drm, fmt, ...) drm_dbg_driver(drm, fmt, ##__VA_ARGS__)
| ^~~~~~~~~~~~~~
drivers/gpu/drm/xe/xe_macros.h:14:21: note: in expansion of macro ‘drm_dbg’
14 | ((cond) && (drm_dbg(&(xe)->drm, \
| ^~~~~~~
drivers/gpu/drm/xe/xe_bo.c:2029:13: note: in expansion of macro ‘XE_IOCTL_DBG’
2029 | if (XE_IOCTL_DBG(xe, !gem_obj))
The problem is that XE_IOCTL_DBG uses this function for conditional expr.
Use a statement expression so it can also be used on conditional checks.
v2: Modify to print when only cond is true.
v3: Modify to evaluate cond only once.
Signed-off-by: Gyeyoung Baek <gye976@gmail.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241102022204.155039-1-gye976@gmail.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Fix merge in commit c787c2901e ("Merge drm/drm-next into
drm-xe-next"). That workaround needs to be done only once.
While at it, also remove undesired newline before checking for error.
Fixes: c787c2901e ("Merge drm/drm-next into drm-xe-next")
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241104183104.2265275-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Backmerging to get up-to-date and to bring in a fix that was
merged through drm-misc-fixes.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The usual collection of singletons - please see the changelogs.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCZyfGDAAKCRDdBJ7gKXxA
jr19AQD6bfDF/6L2Alq1QG26pgrgccEbKzDSzR6pBajwCbdrNQD/XPhiv3zRJfGf
lgt0Qkqwe/ApBhVYUnL8y1CePv3EDgA=
=W5W0
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs"
* tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes
mm: shrinker: avoid memleak in alloc_shrinker_info
.mailmap: update e-mail address for Eugen Hristev
vmscan,migrate: fix page count imbalance on node stats when demoting pages
mailmap: update Jarkko's email addresses
mm: allow set/clear page_type again
nilfs2: fix potential deadlock with newly created symlinks
Squashfs: fix variable overflow in squashfs_readpage_block
kasan: remove vmalloc_percpu test
tools/mm: -Werror fixes in page-types/slabinfo
mm, swap: avoid over reclaim of full clusters
mm: fix PSWPIN counter for large folios swap-in
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
mm/codetag: fix null pointer check logic for ref and tag
mm/gup: stop leaking pinned pages in low memory conditions
Driver fixes for:
- TI driver fix to set EOP for cyclic BCDMA transfers
- sh rz-dmac driver fix for handling config with zero address
-----BEGIN PGP SIGNATURE-----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=Ngtc
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine fixes from Vinod Koul:
- TI driver fix to set EOP for cyclic BCDMA transfers
- sh rz-dmac driver fix for handling config with zero address
* tag 'dmaengine-fix-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: ti: k3-udma: Set EOP for all TRs in cyclic BCDMA transfer
dmaengine: sh: rz-dmac: handle configs where one address is zero
Here is a single driver core revert for 6.12-rc6. It reverts a change
that came in -rc1 that was supposed to resolve a reported problem, but
caused another one, so revert it for now so that we can get this all
worked out properly in 6.13.
The revert has been in linux-next all week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZydlNw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymZQACdGsXkF7ULnB66l3v6+tRov2nNwV8AnAldVvEY
14YCtM4i/bYhoQElLsOB
=TFSg
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core revert from Greg KH:
"Here is a single driver core revert for 6.12-rc6. It reverts a change
that came in -rc1 that was supposed to resolve a reported problem, but
caused another one, so revert it for now so that we can get this all
worked out properly in 6.13.
The revert has been in linux-next all week with no reported issues"
* tag 'driver-core-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "driver core: Fix uevent_show() vs driver detach race"
Here are some small USB and Thunderbolt driver fixes for 6.12-rc6 that
have been sitting in my tree this week. Included in here are the
following:
- thunderbolt driver fixes for reported issues
- USB typec driver fixes
- xhci driver fixes for reported problems
- dwc2 driver revert for a broken change
- usb phy driver fix
- usbip tool fix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZydklw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynrOQCgvUxfi1tUPR78CDuIR1fiaNxdsDsAoI+WwyFt
5U2D3ezAl3ovyRVWlN4y
=DSxw
-----END PGP SIGNATURE-----
Merge tag 'usb-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.12-rc6 that
have been sitting in my tree this week. Included in here are the
following:
- thunderbolt driver fixes for reported issues
- USB typec driver fixes
- xhci driver fixes for reported problems
- dwc2 driver revert for a broken change
- usb phy driver fix
- usbip tool fix
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: typec: tcpm: restrict SNK_WAIT_CAPABILITIES_TIMEOUT transitions to non self-powered devices
usb: phy: Fix API devm_usb_put_phy() can not release the phy
usb: typec: use cleanup facility for 'altmodes_node'
usb: typec: fix unreleased fwnode_handle in typec_port_register_altmodes()
usb: typec: qcom-pmic-typec: fix missing fwnode removal in error path
usb: typec: qcom-pmic-typec: use fwnode_handle_put() to release fwnodes
usb: acpi: fix boot hang due to early incorrect 'tunneled' USB3 device links
Revert "usb: dwc2: Skip clock gating on Broadcom SoCs"
xhci: Fix Link TRB DMA in command ring stopped completion event
xhci: Use pm_runtime_get to prevent RPM on unsupported systems
usbip: tools: Fix detach_port() invalid port error path
thunderbolt: Honor TMU requirements in the domain when setting TMU mode
thunderbolt: Fix KASAN reported stack out-of-bounds read in tb_retimer_scan()
When the MM_WALK capability is enabled, memory that is mostly accessed by
a VM appears younger than it really is, therefore this memory will be less
likely to be evicted. Therefore, the presence of a running VM can
significantly increase swap-outs for non-VM memory, regressing the
performance for the rest of the system.
Fix this regression by always calling {ptep,pmdp}_clear_young_notify()
whenever we clear the young bits on PMDs/PTEs.
[jthoughton@google.com: fix link-time error]
Link: https://lkml.kernel.org/r/20241019012940.3656292-3-jthoughton@google.com
Fixes: bd74fdaea1 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reported-by: David Stevens <stevensd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm: multi-gen LRU: Have secondary MMUs participate in
MM_WALK".
Today, the MM_WALK capability causes MGLRU to clear the young bit from
PMDs and PTEs during the page table walk before eviction, but MGLRU does
not call the clear_young() MMU notifier in this case. By not calling this
notifier, the MM walk takes less time/CPU, but it causes pages that are
accessed mostly through KVM / secondary MMUs to appear younger than they
should be.
We do call the clear_young() notifier today, but only when attempting to
evict the page, so we end up clearing young/accessed information less
frequently for secondary MMUs than for mm PTEs, and therefore they appear
younger and are less likely to be evicted. Therefore, memory that is
*not* being accessed mostly by KVM will be evicted *more* frequently,
worsening performance.
ChromeOS observed a tab-open latency regression when enabling MGLRU with a
setup that involved running a VM:
Tab-open latency histogram (ms)
Version p50 mean p95 p99 max
base 1315 1198 2347 3454 10319
mglru 2559 1311 7399 12060 43758
fix 1119 926 2470 4211 6947
This series replaces the final non-selftest patchs from this series[1],
which introduced a similar change (and a new MMU notifier) with KVM
optimizations. I'll send a separate series (to Sean and Paolo) for the
KVM optimizations.
This series also makes proactive reclaim with MGLRU possible for KVM
memory. I have verified that this functions correctly with the selftest
from [1], but given that that test is a KVM selftest, I'll send it with
the rest of the KVM optimizations later. Andrew, let me know if you'd
like to take the test now anyway.
[1]: https://lore.kernel.org/linux-mm/20240926013506.860253-18-jthoughton@google.com/
This patch (of 2):
The removed stats, MM_LEAF_OLD and MM_NONLEAF_TOTAL, are not very helpful
and become more complicated to properly compute when adding
test/clear_young() notifiers in MGLRU's mm walk.
Link: https://lkml.kernel.org/r/20241019012940.3656292-1-jthoughton@google.com
Link: https://lkml.kernel.org/r/20241019012940.3656292-2-jthoughton@google.com
Fixes: bd74fdaea1 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Here are some small char/misc/iio fixes for 6.12-rc6 that resolves some
reported issues. Included in here are the following:
- small IIO driver fixes for many reported issues
- mei driver fix for a suddenly much reported issue for an "old"
issue.
- MAINTAINERS update for a developer who has moved companies and
forgot to update their old entry.
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZydl6A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yl1jACfWZJs7WLkK8N36jPvdFtHD/mBmA0AnRJc1bw+
f8XQ6MJsU6nZi5PErB8s
=/D+f
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull misc driver fixes from Greg KH:
"Here are some small char/misc/iio fixes for 6.12-rc6 that resolve
some reported issues. Included in here are the following:
- small IIO driver fixes for many reported issues
- mei driver fix for a suddenly much reported issue for an "old"
issue.
- MAINTAINERS update for a developer who has moved companies and
forgot to update their old entry.
All of these have been in linux-next this week with no reported
issues"
* tag 'char-misc-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: use kvmalloc for read buffer
MAINTAINERS: add netup_unidvb maintainer
iio: dac: Kconfig: Fix build error for ltc2664
iio: adc: ad7124: fix division by zero in ad7124_set_channel_odr()
staging: iio: frequency: ad9832: fix division by zero in ad9832_calc_freqreg()
docs: iio: ad7380: fix supply for ad7380-4
iio: adc: ad7380: fix supplies for ad7380-4
iio: adc: ad7380: add missing supplies
iio: adc: ad7380: use devm_regulator_get_enable_read_voltage()
dt-bindings: iio: adc: ad7380: fix ad7380-4 reference supply
iio: light: veml6030: fix microlux value calculation
iio: gts-helper: Fix memory leaks for the error path of iio_gts_build_avail_scale_table()
iio: gts-helper: Fix memory leaks in iio_gts_build_avail_scale_table()
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at suspend
when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZycQwgAKCRBAj56VGEWX
nFgtAQDxuWplL+cwA5f3g+/Rq38faHBY5ebmsC9G/QnBZs4hTQD/dL04tU9NwvNq
GYw4MYRNaDIeY8vyq21Y+dQe0uL0rAM=
=xAeU
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at
suspend when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix regression when re-registering input handlers
Input: adp5588-keys - do not try to disable interrupt 0
Input: edt-ft5x06 - fix regmap leak when probe fails
- Fix a memory leak in modpost
- Resolve build issues when cross-compiling RPM and Debian packages
- Fix another regression in Kconfig
- Fix incorrect MODULE_ALIAS() output in modpost
-----BEGIN PGP SIGNATURE-----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=QPqn
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix a memory leak in modpost
- Resolve build issues when cross-compiling RPM and Debian packages
- Fix another regression in Kconfig
- Fix incorrect MODULE_ALIAS() output in modpost
* tag 'kbuild-fixes-v6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
modpost: fix input MODULE_DEVICE_TABLE() built for 64-bit on 32-bit host
modpost: fix acpi MODULE_DEVICE_TABLE built with mismatched endianness
kconfig: show sub-menu entries even if the prompt is hidden
kbuild: deb-pkg: add pkg.linux-upstream.nokerneldbg build profile
kbuild: deb-pkg: add pkg.linux-upstream.nokernelheaders build profile
kbuild: rpm-pkg: disable kernel-devel package when cross-compiling
sumversion: Fix a memory leak in get_src_version()
When CONFIG_AMD_NB is not set a COMPILE_TEST of an AMD specific driver
fails due to a missing inline stub. Add the stub to cure it.
-----BEGIN PGP SIGNATURE-----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=p6Lo
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A trivial compile test fix for x86:
When CONFIG_AMD_NB is not set a COMPILE_TEST of an AMD specific driver
fails due to a missing inline stub. Add the stub to cure it"
* tag 'x86-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/amd_nb: Fix compile-testing without CONFIG_AMD_NB
When a thread is cloned, the posix CPU timers are not inherited.
If the parent has a CPU timer armed the corresponding tick dependency in
the tasks tick_dep_mask is set and copied to the new thread, which means
the new thread and all decendants will prevent the system to go into full
NOHZ operation.
Clear the tick dependency mask in copy_process() to fix this.
-----BEGIN PGP SIGNATURE-----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=83r/
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for posix CPU timers.
When a thread is cloned, the posix CPU timers are not inherited.
If the parent has a CPU timer armed the corresponding tick dependency
in the tasks tick_dep_mask is set and copied to the new thread, which
means the new thread and all decendants will prevent the system to go
into full NOHZ operation.
Clear the tick dependency mask in copy_process() to fix this"
* tag 'timers-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear TICK_DEP_BIT_POSIX_TIMER on clone
- Plug a race between pick_next_task_fair() and try_to_wake_up() where
both try to write to the same task, even though both paths hold a
runqueue lock, but obviously from different runqueues.
The problem is that the store to task::on_rq in __block_task() is
visible to try_to_wake_up() which assumes that the task is not queued.
Both sides then operate on the same task.
Cure it by rearranging __block_task() so the the store to task::on_rq is
the last operation on the task.
- Prevent a potential NULL pointer dereference in task_numa_work()
task_numa_work() iterates the VMAs of a process. A concurrent unmap of
the address space can result in a NULL pointer return from vma_next()
which is unchecked.
Add the missing NULL pointer check to prevent this.
- Operate on the correct scheduler policy in task_should_scx()
task_should_scx() returns true when a task should be handled by sched
EXT. It checks the tasks scheduling policy.
This fails when the check is done before a policy has been set.
Cure it by handing the policy into task_should_scx() so it operates
on the requested value.
- Add the missing handling of sched EXT in the delayed dequeue
mechanism. This was simply forgotten.
-----BEGIN PGP SIGNATURE-----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=4mie
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
- Plug a race between pick_next_task_fair() and try_to_wake_up() where
both try to write to the same task, even though both paths hold a
runqueue lock, but obviously from different runqueues.
The problem is that the store to task::on_rq in __block_task() is
visible to try_to_wake_up() which assumes that the task is not
queued. Both sides then operate on the same task.
Cure it by rearranging __block_task() so the the store to task::on_rq
is the last operation on the task.
- Prevent a potential NULL pointer dereference in task_numa_work()
task_numa_work() iterates the VMAs of a process. A concurrent unmap
of the address space can result in a NULL pointer return from
vma_next() which is unchecked.
Add the missing NULL pointer check to prevent this.
- Operate on the correct scheduler policy in task_should_scx()
task_should_scx() returns true when a task should be handled by sched
EXT. It checks the tasks scheduling policy.
This fails when the check is done before a policy has been set.
Cure it by handing the policy into task_should_scx() so it operates
on the requested value.
- Add the missing handling of sched EXT in the delayed dequeue
mechanism. This was simply forgotten.
* tag 'sched-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/ext: Fix scx vs sched_delayed
sched: Pass correct scheduling policy to __setscheduler_class
sched/numa: Fix the potential null pointer dereference in task_numa_work()
sched: Fix pick_next_task_fair() vs try_to_wake_up() race
perf_event_clear_cpumask() uses list_for_each_entry_rcu() without being
in a RCU read side critical section, which triggers a "suspicious RCU
usage" warning.
It turns out that the list walk does not be RCU protected because the
write side lock is held in this contxt.
Change it to a regular list walk.
-----BEGIN PGP SIGNATURE-----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=qlTN
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Thomas Gleixner:
"perf_event_clear_cpumask() uses list_for_each_entry_rcu() without
being in a RCU read side critical section, which triggers a
'suspicious RCU usage' warning.
It turns out that the list walk does not be RCU protected because the
write side lock is held in this context.
Change it to a regular list walk"
* tag 'perf-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Fix missing RCU reader protection in perf_event_clear_cpumask()
- Fix an off-by-one error in the failure path of msi_domain_alloc(),
which causes the cleanup loop to terminate early and leaking the first
allocated interrupt.
- Handle a corner case in GIC-V4 versus a lazily mapped Virtual
Processing Element (VPE). If the VPE has not been mapped because the
guest has not yet emitted a mapping command, then the set_affinity()
callback returns an error code, which causes the vCPU management to fail.
Return success in this case without touching the hardware. This will be
done later when the guest issues the mapping command.
-----BEGIN PGP SIGNATURE-----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=6Li6
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
- Fix an off-by-one error in the failure path of msi_domain_alloc(),
which causes the cleanup loop to terminate early and leaking the
first allocated interrupt.
- Handle a corner case in GIC-V4 versus a lazily mapped Virtual
Processing Element (VPE). If the VPE has not been mapped because the
guest has not yet emitted a mapping command, then the set_affinity()
callback returns an error code, which causes the vCPU management to
fail.
Return success in this case without touching the hardware. This will
be done later when the guest issues the mapping command.
* tag 'irq-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v4: Correctly deal with set_affinity on lazily-mapped VPEs
genirq/msi: Fix off-by-one error in msi_domain_alloc()
When building a 64-bit kernel on a 32-bit build host, incorrect
input MODULE_ALIAS() entries may be generated.
For example, when compiling a 64-bit kernel with CONFIG_INPUT_MOUSEDEV=m
on a 64-bit build machine, you will get the correct output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*r*a*0,*1,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*r*a*0,*1,*18,*1C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*r*a*0,*1,*m*l*s*f*w*");
However, building the same kernel on a 32-bit machine results in
incorrect output:
$ grep MODULE_ALIAS drivers/input/mousedev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*110,*130,*r*0,*1,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*2,*k*r*8,*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*14A,*16A,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*145,*165,*r*a*0,*1,*18,*1C,*20,*21,*38,*3C,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*3,*k*110,*130,*r*a*0,*1,*20,*21,*m*l*s*f*w*");
A similar issue occurs with CONFIG_INPUT_JOYDEV=m. On a 64-bit build
machine, the output is:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*120,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*130,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*r*a*m*l*s*f*w*");
However, on a 32-bit machine, the output is incorrect:
$ grep MODULE_ALIAS drivers/input/joydev.mod.c
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*0,*20,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*2,*22,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*8,*28,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*3,*k*r*a*6,*26,*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*11F,*13F,*r*a*m*l*s*f*w*");
MODULE_ALIAS("input:b*v*p*e*-e*1,*k*2C0,*2E0,*r*a*m*l*s*f*w*");
When building a 64-bit kernel, BITS_PER_LONG is defined as 64. However,
on a 32-bit build machine, the constant 1L is a signed 32-bit value.
Left-shifting it beyond 32 bits causes wraparound, and shifting by 31
or 63 bits makes it a negative value.
The fix in commit e0e9263271 ("[PATCH] PATCH: 1 line 2.6.18 bugfix:
modpost-64bit-fix.patch") is incorrect; it only addresses cases where
a 64-bit kernel is built on a 64-bit build machine, overlooking cases
on a 32-bit build machine.
Using 1ULL ensures a 64-bit width on both 32-bit and 64-bit machines,
avoiding the wraparound issue.
Fixes: e0e9263271 ("[PATCH] PATCH: 1 line 2.6.18 bugfix: modpost-64bit-fix.patch")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
