tcp_time_to_recover() does not need the @flag argument.
Its first parameter can be marked const, and of tcp_sock type.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618091246.1260322-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As discussesd before in [0] proxy entries (which are more configuration
than runtime data) should stay when the link (carrier) goes does down.
This is what happens for regular neighbour entries.
So lets fix this by:
- storing in proxy entries the fact that it was added as NUD_PERMANENT
- not removing NUD_PERMANENT proxy entries when the carrier goes down
(same as how it's done in neigh_flush_dev() for regular neigh entries)
[0]: https://lore.kernel.org/netdev/c584ef7e-6897-01f3-5b80-12b53f7b4bf4@kernel.org/
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250617141334.3724863-1-nico.escande@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allow tx_packets and tx_bytes counter in the driver to represent
the packets transmitted post GSO processing.
Currently they are populated as bigger pre-GSO packets and bytes
Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Migrate tasklet APIs to the new bottom half workqueue mechanism. It
replaces all occurrences of tasklet usage with the appropriate workqueue
APIs throughout the usbnet driver. This transition ensures compatibility
with the latest design and enhances performance.
Signed-off-by: Jun Miao <jun.miao@intel.com>
Link: https://patch.msgid.link/20250618173923.950510-1-jun.miao@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Don't populate the const read-only array supported_sizes on the
stack at run time, instead make it static.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Vitaly Lifshits <vitaly.lifshits@intel.com>>
Link: https://patch.msgid.link/20250618135408.1784120-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij Rempel says:
====================
convert lan78xx driver to the PHYLINK
This series converts the lan78xx driver to use the PHYLINK framework,
which enhances PHY and MAC management. The changes also streamline the
driver by removing unused elements and improving link status reporting.
This is the final part of the previously split conversion series:
https://lore.kernel.org/all/20250428130542.3879769-1-o.rempel@pengutronix.de/
Tested on EVB_LAN7850.
====================
Link: https://patch.msgid.link/20250618122602.3156678-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove unused members from struct lan78xx_net, including:
driver_priv
suspend_count
mdix_ctrl
These fields are no longer used in the driver and can be safely removed
as part of a cleanup.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-7-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor Energy-Efficient Ethernet (EEE) support in the LAN78xx driver to
fully integrate with the phylink Low Power Idle (LPI) API. This includes:
- Replacing direct calls to `phy_ethtool_get_eee` and `phy_ethtool_set_eee`
with `phylink_ethtool_get_eee` and `phylink_ethtool_set_eee`.
- Implementing `.mac_enable_tx_lpi` and `.mac_disable_tx_lpi` to control
LPI transitions via phylink.
- Configuring `lpi_timer_default` to align with recommended values from
LAN7800 documentation.
- ensure EEE is disabled on controller reset
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-6-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Refactor lan78xx_get_link_ksettings and lan78xx_set_link_ksettings to
use the phylink API (phylink_ethtool_ksettings_get and
phylink_ethtool_ksettings_set) instead of directly interfacing with the
PHY. This change simplifies the code and ensures better integration with
the phylink framework for link management.
Additionally, the explicit calls to usb_autopm_get_interface() and
usb_autopm_put_interface() have been removed. These were originally
needed to manage USB power management during register accesses. However,
lan78xx_mdiobus_read() and lan78xx_mdiobus_write() already handle USB
auto power management internally, ensuring that the interface remains
active when necessary. Since there are no other direct register accesses
in these functions that require explicit power management handling, the
extra calls have become redundant and are no longer needed.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-5-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace the custom lan78xx_get_link implementation with the standard
ethtool_op_get_link helper, which uses netif_carrier_ok to reflect
the current link status accurately.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-4-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The EVENT_LINK_RESET macro currently triggers deferred work after a PHY
interrupt. Prior to PHYLINK conversion, this work included reconfiguring
the MAC and PHY, effectively performing a 'link reset'.
However, after porting the driver to the PHYLINK framework, the logic
associated with this event now solely handles the acknowledgment of
the PHY interrupt. The MAC and PHY reconfiguration is now managed by
PHYLINK's dedicated callbacks.
To accurately reflect its current, narrowed functionality, rename
EVENT_LINK_RESET to EVENT_PHY_INT_ACK.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-3-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the LAN78xx USB Ethernet driver to use the PHYLINK framework for
managing PHY and MAC interactions. This improves consistency with other
network drivers, simplifies pause frame handling, and enables cleaner
suspend/resume support.
Key changes:
- Replace all PHYLIB-based logic with PHYLINK equivalents:
- Replace phy_connect()/phy_disconnect() with phylink_connect_phy()
- Replace phy_start()/phy_stop() with phylink_start()/phylink_stop()
- Replace pauseparam handling with phylink_ethtool_get/set_pauseparam()
- Introduce lan78xx_phylink_setup() to configure PHYLINK
- Add phylink MAC operations:
- lan78xx_mac_config()
- lan78xx_mac_link_up()
- lan78xx_mac_link_down()
- Remove legacy link state handling:
- lan78xx_link_status_change()
- lan78xx_link_reset()
- Handle fixed-link fallback for LAN7801 using phylink_set_fixed_link()
- Replace deprecated flow control handling with phylink-managed logic
Power management:
- Switch suspend/resume paths to use phylink_suspend()/phylink_resume()
- Ensure proper use of rtnl_lock() where required
- Note: full runtime testing of power management is currently limited
due to hardware setup constraints
Note: Conversion of EEE (Energy Efficient Ethernet) handling to the
PHYLINK-managed API will be done in a follow-up patch. For now, the
legacy EEE enable logic is preserved in mac_link_up().
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250618122602.3156678-2-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can avoid open-coding the loop construct which counts firmware child
nodes with a specific name by using the newly added
device_get_named_child_node_count().
The gianfar driver has such open-coded loop. Replace it with the
device_get_child_node_count_named().
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/3a33988fc042588cb00a0bfc5ad64e749cb0eb1f.1750248902.git.mazziesaccount@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to clean up of the VLAN handling, factor out the VLAN
handling into separate function fec_enet_rx_vlan().
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-11-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move __vlan_hwaccel_put_tag() into the if statement that sets
vlan_packet_rcvd = true. This change eliminates the unnecessary
vlan_packet_rcvd variable, simplifying the code and improving clarity.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-10-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to clean up of the VLAN handling, reduce the scope of data.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-9-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For better readability and maintainability, use the provided helper function
skb_vlan_eth_hdr() to replace manual the VLAN header calculation, and change
the type of vlan_header to struct vlan_ethhdr to take into account that the
Ethernet header plus VLAN header is returned.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-8-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are the functions fec_enet_rx_queue() and fec_enet_tx_queue(),
one for handling the RX queue the other one handles the TX queue.
However they don't have the same signature. Align fec_enet_rx_queue()
argument order with fec_enet_tx_queue() to make code more readable.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-7-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace "1 << 5" for configuring 1000 MBit/s with a defined constant to
improve code readability and maintainability.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-6-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In da722186f6 ("net: fec: set GPR bit on suspend by DT
configuration.") the platform_device_id fec_devtype::driver_data was
converted from holding the quirks to a pointing to struct fec_devinfo.
The struct fec_devinfo holding the information for the i.MX6SX was
named fec_imx6x_info.
Rename fec_imx6x_info to fec_imx6sx_info to align with the SoC's name.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-5-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a preparation patch to make addition of new includes easier
without breaking the alphabetic order.
Suggested-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-4-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In commit 4d494cdc92 ("net: fec: change data structure to support
multiqueue") the data structures were changed, so that the comment about
the sent-in-place skb doesn't apply any more. Remove it.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-2-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
codespell has found some typos in the comments, fix them.
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://patch.msgid.link/20250618-fec-cleanups-v4-1-c16f9a1af124@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: stmmac: loongson1: cleanups
A couple of patches to cleanup loongson1. First, introducing a match
data struct to allow the per-match data to be extended beyond the init
function pointer, and then adding a setup method to allow the resource
base address to be translated to the MAC index at probe time rather
than repeatedly in the setup function.
====================
Link: https://patch.msgid.link/aFKXzlno7HkG-cNh@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ls1b_dwmac_syscon_init() was getting the stmmac iomem resource to detect
which GMAC block is being used. Move this to a separate setup() function
that only runs at probe time, so it can sensibly behave with an
unrecognised resource adress. Use this to set a MAC index (id) which is
then used in place of testing the base address.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B & LS1C
Link: https://patch.msgid.link/E1uRqEE-004c7M-Go@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide a structure for match data rather than using the function
pointer as match data. This allows stronger type-checking for the
function itself, and allows extensions to the match data.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Tested-by: Keguang Zhang <keguang.zhang@gmail.com> # on LS1B & LS1C
Link: https://patch.msgid.link/E1uRqE9-004c7G-CB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pass the stmmac_priv structure into the pcs_set_ane() MAC method rather
than having callers dereferencing this structure for the IO address.
Tested-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> # sa8775p-ride-r3
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/E1uRqbQ-004djP-1l@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
requires adding support for a number of new FW commands so
it's quite large in terms of LoC. The rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue reset,
prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=2mAa
-----END PGP SIGNATURE-----
Merge tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless.
The ath12k fix to avoid FW crashes requires adding support for a
number of new FW commands so it's quite large in terms of LoC. The
rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK
support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue
reset, prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path"
* tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1
net: airoha: Compute number of descriptors according to reserved memory size
tools: ynl: fix mixing ops and notifications on one socket
net: atm: fix /proc/net/atm/lec handling
net: atm: add lec_mutex
mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available
net: airoha: Always check return value from airoha_ppe_foe_get_entry()
NFC: nci: uart: Set tty->disc_data only in success path
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
MAINTAINERS: Remove Shannon Nelson from MAINTAINERS file
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
eth: fbnic: avoid double free when failing to DMA-map FW msg
tcp: fix passive TFO socket having invalid NAPI ID
selftests: net: add test for passive TFO socket NAPI ID
selftests: net: add passive TFO test binary
selftests: netdevsim: improve lib.sh include in peer.sh
tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
Octeontx2-pf: Fix Backpresure configuration
net: ftgmac100: select FIXED_PHY
net: ethtool: remove duplicate defines for family info
...
EN7581 SoC allows configuring the size and the number of buffers in
hwfd payload queue for both QDMA0 and QDMA1.
In order to reduce the required DRAM used for hwfd buffers queues and
decrease the memory footprint, differentiate hwfd buffer size for QDMA0
and QDMA1 and reduce hwfd buffer size to 1KB for QDMA1 (WAN) while
maintaining 2KB for QDMA0 (LAN).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-2-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to not exceed the reserved memory size for hwfd buffers,
compute the number of hwfd buffers/descriptors according to the
reserved memory size and the size of each hwfd buffer (2KB).
Fixes: 3a1ce9e3d0 ("net: airoha: Add the capability to allocate hwfd buffers via reserved-memory")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-1-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- ath12k
- avoid busy-waiting
- activate correct number of links
- iwlwifi
- iwldvm regression (lots of warnings)
- iwlmld merge damage regression (crash)
- fix build with some old gcc versions
- carl9170: don't talk to device w/o FW [syzbot]
- ath6kl: remove bad FW WARN [syzbot]
- ieee80211: use variable-length arrays [syzbot]
- mac80211
- remove WARN on delayed beacon update [syzbot]
- drop OCB frames with invalid source [syzbot]
-----BEGIN PGP SIGNATURE-----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=Q6JR
-----END PGP SIGNATURE-----
Merge tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
More fixes:
- ath12k
- avoid busy-waiting
- activate correct number of links
- iwlwifi
- iwldvm regression (lots of warnings)
- iwlmld merge damage regression (crash)
- fix build with some old gcc versions
- carl9170: don't talk to device w/o FW [syzbot]
- ath6kl: remove bad FW WARN [syzbot]
- ieee80211: use variable-length arrays [syzbot]
- mac80211
- remove WARN on delayed beacon update [syzbot]
- drop OCB frames with invalid source [syzbot]
* tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking
wifi: iwlwifi: dvm: restore n_no_reclaim_cmds setting
wifi: iwlwifi: cfg: Limit cb_size to valid range
wifi: iwlwifi: restore missing initialization of async_handlers_list (again)
wifi: ath6kl: remove WARN on bad firmware input
wifi: carl9170: do not ping device which has failed to load firmware
wifi: ath12k: don't wait when there is no vdev started
wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process()
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: fix documentation on firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: ath12k: update link active in case two links fall on the same MAC
wifi: ath12k: support WMI_MLO_LINK_SET_ACTIVE_CMDID command
wifi: ath12k: update freq range for each hardware mode
wifi: ath12k: parse and save sbs_lower_band_end_freq from WMI_SERVICE_READY_EXT2_EVENTID event
wifi: ath12k: parse and save hardware mode info from WMI_SERVICE_READY_EXT_EVENTID event for later use
wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STAT
wifi: mac80211: don't WARN for late channel/color switch
wifi: mac80211: drop invalid source address OCB frames
wifi: remove zero-length arrays
====================
Link: https://patch.msgid.link/20250618210642.35805-6-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The multi message support loosened the connection between the request
and response handling, as we can now submit multiple requests before
we start processing responses. Passing the attr set to NlMsgs decoding
no longer makes sense (if it ever did), attr set may differ message
by messsage. Isolate the part of decoding responsible for attr-set
specific interpretation and call it once we identified the correct op.
Without this fix performing SET operation on an ethtool socket, while
being subscribed to notifications causes:
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1096, in _op
# Exception| return self._ops(ops)[0]
# Exception| ~~~~~~~~~^^^^^
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1040, in _ops
# Exception| nms = NlMsgs(reply, attr_space=op.attr_set)
# Exception| ^^^^^^^^^^^
The value of op we use on line 1040 is stale, it comes form the previous
loop. If a notification comes before a response we will update op to None
and the next iteration thru the loop will break with the trace above.
Fixes: 6fda63c45f ("tools/net/ynl: fix cli.py --subscribe feature")
Fixes: ba8be00f68 ("tools/net/ynl: Add multi message support to ynl")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250618171746.1201403-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: atm: protect dev_lec[] with a mutex
Based on an initial syzbot report.
First patch is adding lec_mutex to address the report.
Second patch protects /proc/net/atm/lec operations.
We probably should delete this driver, it seems quite broken.
====================
Link: https://patch.msgid.link/20250618140844.1686882-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/proc/net/atm/lec must ensure safety against dev_lec[] changes.
It appears it had dev_put() calls without prior dev_hold(),
leading to imbalance and UAF.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # Minor atm contributor
Link: https://patch.msgid.link/20250618140844.1686882-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The message "Error getting PHY irq. Use polling instead"
is emitted when the mlxbf_gige driver is loaded by the
kernel before the associated gpio-mlxbf driver, and thus
the call to get the PHY IRQ fails since it is not yet
available. The driver probe() must return -EPROBE_DEFER
if acpi_dev_gpio_irq_get_by() returns the same.
Fixes: 6c2a6ddca7 ("net: mellanox: mlxbf_gige: Replace non-standard interrupt handling")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250618135902.346-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
airoha_ppe_foe_get_entry routine can return NULL, so check the returned
pointer is not NULL in airoha_ppe_foe_flow_l2_entry_update()
Fixes: b81e0f2b58 ("net: airoha: Add FLOW_CLS_STATS callback support")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250618-check-ret-from-airoha_ppe_foe_get_entry-v2-1-068dcea3cc66@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting tty->disc_data before opening the NCI device means we need to
clean it up on error paths. This also opens some short window if device
starts sending data, even before NCIUARTSETDRIVER IOCTL succeeded
(broken hardware?). Close the window by exposing tty->disc_data only on
the success path, when opening of the NCI device and try_module_get()
succeeds.
The code differs in error path in one aspect: tty->disc_data won't be
ever assigned thus NULL-ified. This however should not be relevant
difference, because of "tty->disc_data=NULL" in nci_uart_tty_open().
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Fixes: 9961127d4b ("NFC: nci: add generic uart support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250618073649.25049-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Brett Creeley is taking ownership of AMD/Pensando drivers while I wander
off into the sunset with my retirement this month. I'll still keep an
eye out on a few topics for awhile, and maybe do some free-lance work in
the future.
Meanwhile, thank you all for the fun and support and the many learning
opportunities :-).
Special thanks go to DaveM for merging my first patch long ago, the big
ionic patchset a few years ago, and my last patchset last week.
Redirect things to a non-corporate account.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20250616224437.56581-1-shannon.nelson@amd.com
[Jakub: squash in the .mailmap update]
Signed-off-by: Shannon Nelson <sln@onemain.com>
Link: https://patch.msgid.link/20250619010603.1173141-1-sln@onemain.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmhSfcsTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnDRmB/0WzxWVwV/xoCHiUeIy5y2j+veMhkC6
/sgHtiG0UQZ9ELliczM8//sODGUK34NTDIGV8sQ3Htr2S6WMncJKeGS2SNysRwLE
GxKphxizVfy8NxvHYU6TreAeyhcbJLsy+AhFnormPjBCgZOJZwN3x3quSdxRDDV/
/fNnlRK/06cikqToLxVqeZyrAchr0UJZ0JxLc8QseG0WFkX0286w3S/N/yp5rA1Y
GY1Y+EMo+zRWYRWNpkYM9lzcOURW8VyjXwzJeww/jot/sZs0tHzzx/9PmPU6s1t4
JAIRLgTDDa94GlbzXezc9fhTzqydpLxKroKhLX8wHyjqSUO41viuCG4L
=hU1D
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.17-20250618' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-06-18
All 10 patches are by Geert Uytterhoeven, target the rcar_canfd
driver, first cleanup/refactor the driver and then add support for
Transceiver Delay Compensation.
* tag 'linux-can-next-for-6.17-20250618' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rcar_canfd: Add support for Transceiver Delay Compensation
can: rcar_canfd: Return early in rcar_canfd_set_bittiming() when not FD
can: rcar_canfd: Share config code in rcar_canfd_set_bittiming()
can: rcar_canfd: Rename rcar_canfd_setrnc() to rcar_canfd_set_rnc()
can: rcar_canfd: Repurpose f_dcfg base for other registers
can: rcar_canfd: Simplify data access in rcar_canfd_{ge,pu}t_data()
can: rcar_canfd: Add helper variable dev to rcar_canfd_reset_controller()
can: rcar_canfd: Add helper variable ndev to rcar_canfd_rx_pkt()
can: rcar_canfd: Remove bittiming debug prints
can: rcar_canfd: Consistently use ndev for net_device pointers
====================
Link: https://patch.msgid.link/20250618092336.2175168-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before calling lan743x_ptp_io_event_clock_get(), the 'channel' value
is checked against the maximum value of PCI11X1X_PTP_IO_MAX_CHANNELS(8).
This seems correct and aligns with the PTP interrupt status register
(PTP_INT_STS) specifications.
However, lan743x_ptp_io_event_clock_get() writes to ptp->extts[] with
only LAN743X_PTP_N_EXTTS(4) elements, using channel as an index:
lan743x_ptp_io_event_clock_get(..., u8 channel,...)
{
...
/* Update Local timestamp */
extts = &ptp->extts[channel];
extts->ts.tv_sec = sec;
...
}
To avoid an out-of-bounds write and utilize all the supported GPIO
inputs, set LAN743X_PTP_N_EXTTS to 8.
Detected using the static analysis tool - Svace.
Fixes: 60942c397a ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://patch.msgid.link/20250616113743.36284-1-aleksei.kodanev@bell-sw.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu says:
====================
selftests: net: use slowwait to make sure setup finished
The two updated tests sometimes failed because the network setup hadn't
completed. Used slowwait to ensure the setup finished and the tests
always passed. I ran both tests 50 times, and all of them passed.
====================
Link: https://patch.msgid.link/20250617105101.433718-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sometimes the vxlan vnifiltering test failed on slow machines due to
network setup not finished. e.g.
TEST: VM connectivity over vnifiltering vxlan (ipv4 default rdst) [ OK ]
TEST: VM connectivity over vnifiltering vxlan (ipv6 default rdst) [FAIL]
Let's use slowwait to make sure the connection is finished.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250617105101.433718-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
