These changes enable PCI, Ethernet and HDA support on Jetson AGX Orin.
DMA support is enabled for I2C on a number of SoC generations and the
Google Pixel C (a.k.a. Smaug) device receives Bluetooth and Wi-Fi
support.
Other than that this also contains some minor cleanups and fixes.
-----BEGIN PGP SIGNATURE-----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=hMuy
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=fOSZ
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v6.1-rc1
These changes enable PCI, Ethernet and HDA support on Jetson AGX Orin.
DMA support is enabled for I2C on a number of SoC generations and the
Google Pixel C (a.k.a. Smaug) device receives Bluetooth and Wi-Fi
support.
Other than that this also contains some minor cleanups and fixes.
* tag 'tegra-for-6.1-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add GPCDMA support for Tegra I2C
arm64: tegra: Add iommus for HDA on Tegra234
arm64: tegra: Enable HDA node for Jetson AGX Orin
arm64: tegra: Add context isolation domains on Tegra234
arm64: tegra: Fixup iommu-map property formatting
arm64: dts: tegra: smaug: Add Wi-Fi node
arm64: dts: tegra: smaug: Add Bluetooth node
arm64: tegra: Enable MGBE on Jetson AGX Orin Developer Kit
arm64: tegra: Add MGBE nodes on Tegra234
arm64: tegra: Fix up compatible for Tegra234 GPCDMA
arm64: tegra: Enable PCIe slots in P3737-0000 board
arm64: tegra: Add P2U and PCIe controller nodes to Tegra234 DT
arm64: tegra: Add regulators required for PCIe
Link: https://lore.kernel.org/r/20220916101957.1635854-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
-----BEGIN PGP SIGNATURE-----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=fXO9
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PY4Y
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v6.1-rc1
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
* tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Host1x context stream IDs on Tegra234
dt-bindings: net: Add Tegra234 MGBE
Link: https://lore.kernel.org/r/20220916101957.1635854-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYyQybAAKCRCejrg/N2X7
/R+wAQCDcL8RVW4opVAOjDkMOCnVxq8M+pjx+jVOnIPIRsGnNwEAxZ9sX5gP8HM3
ygUF/qoc3bUxXAN/YH6HfWIpYszV8wY=
=9Ge/
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=49Pi
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v6.1 #2
It contains:
- new SAMA5D3 based board, namely SAMA5D3-EDS
- adjustments to pass the DT binding validations
- disable AES on some LAN966 based boards as they are reserverd by
secure OS
* tag 'at91-dt-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
spi: dt-bindings: atmel,at91rm9200-spi: Add DMA related properties
ARM: dts: at91: Add `atmel,usart-mode` required property to serial nodes
ARM: dts: at91: sam9x60ek: Add DBGU compatibles to uart1
ARM: dts: at91: sama7g5: Swap rx and tx for spi11
dts: arm: at91: Add SAMA5D3-EDS Board
dt-bindings: arm: at91: Add info on SAMA5D3-EDS
ARM: dts: lan966x: disable aes
Link: https://lore.kernel.org/r/20220916105407.1287452-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The DT nodes of the SPI IP's may contain DMA related properties so
make sure that the binding is able to properly validate those as
well by making it aware of these optional properties.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-5-sergiu.moga@microchip.com
Add the missing required DT property `atmel,usart-mode` to the serial
nodes of Atmel/Microchip DT files.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-4-sergiu.moga@microchip.com
Maintain consistency among the compatibles of the serial nodes of
sam9x60ek and highlight the incremental characteristic of its serial
IP's by making sure that all serial nodes contain both the sam9x60
and sam9260 usart/dbgu compatibles.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-3-sergiu.moga@microchip.com
Swap the rx and tx of the DMA related DT properties of the spi11 node
in order to maintain consistency across Microchip/Atmel SoC files.
Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220913142205.162399-2-sergiu.moga@microchip.com
please pull the following:
- Rafal adds the BCM4908 LED controller node and describes all 32 LED
pins, he also adds support for the Asus GC-AC5300 LEDs
-----BEGIN PGP SIGNATURE-----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=+IBl
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ybyG
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.1/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM64-based SoC changes for 6.1,
please pull the following:
- Rafal adds the BCM4908 LED controller node and describes all 32 LED
pins, he also adds support for the Asus GC-AC5300 LEDs
* tag 'arm-soc/for-6.1/devicetree-arm64' of https://github.com/Broadcom/stblinux:
arm64: dts: broadcom: bcm4908: add Asus GT-AC5300 LEDs
arm64: dts: broadcom: bcm4908: add LEDs controller block
arm64: dts: broadcom: bcm4908: add remaining LED pins
Link: https://lore.kernel.org/r/20220915023044.2350782-3-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
for 6.1, please pull the following:
- Rafal improves the BCM5301X PCIe DT nodes schema validation by
flagging the PCIe controller with a missing "device_type" property
- William merges BCM4908 within BCMBCA since this chip is part of the
Broadcom Broadband Carrier Access group and follows the architecture of
those chips
-----BEGIN PGP SIGNATURE-----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=JcYR
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=4L+j
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-6.1/devicetree' of https://github.com/Broadcom/stblinux into arm/dt
This pull request contains Broadcom ARM-based SoC Device Tree updates
for 6.1, please pull the following:
- Rafal improves the BCM5301X PCIe DT nodes schema validation by
flagging the PCIe controller with a missing "device_type" property
- William merges BCM4908 within BCMBCA since this chip is part of the
Broadcom Broadband Carrier Access group and follows the architecture of
those chips
* tag 'arm-soc/for-6.1/devicetree' of https://github.com/Broadcom/stblinux:
arm64: bcmbca: Merge ARCH_BCM4908 to ARCH_BCMBCA
arm64: dts: Add BCM4908 generic board dts
arm64: dts: Move BCM4908 dts to bcmbca folder
arm64: dts: bcmbca: update BCM4908 board dts files
dt-bindings: arm64: bcmbca: Update BCM4908 description
dt-bindings: arm64: bcmbca: Merge BCM4908 into BCMBCA
ARM: dts: BCM5301X: Add basic PCI controller properties
Link: https://lore.kernel.org/r/20220915023044.2350782-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add dma properties to support GPCDMA for I2C in Tegra 186 and later
chips
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add the iommus property to the HDA node on Tegra234.
Signed-off-by: Mohan Kumar <mkumard@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add Host1x context isolation domains on Tegra234. On Tegra234 we have
two IOMMUs that are connected to Host1x-channel programmed engines,
so we have to include domains for each of them.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make sure that each phandle-array is enclosed in a set of angular
brackets and properly indent each entry.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Google Pixel C contains a BRCM4354 Wi-Fi + BT module.
Add a DT node for its Wi-Fi functionality. Tested on Pixel C.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Google Pixel C contains a BRCM4354 Wi-Fi + BT module.
Add a DT node for its BT functionality. Tested on Pixel C.
Signed-off-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Signed-off-by: Thierry Reding <treding@nvidia.com>
A Multi-Gigabit Ethernet (MGBE) instance drives the primary Ethernet
port on the Jetson AGX Orin Developer Kit. Enable it.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add device tree nodes for the four instances of the Multi-Gigabit
Ethernet (MGBE) IP found on NVIDIA Tegra234 SoCs.
Signed-off-by: Bhadram Varka <vbhadram@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is no need to list the Tegra194-specific compatible for Tegra234
because the backwards-compatibility goes back all the way to Tegra186.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add defines for stream IDs used for Host1x context isolation
on Tegra234. The same stream IDs are used for both NISO0 and
NISO1 SMMUs since Host1x's stream ID protection tables don't
make a distinction between the two.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SAMA5D3-EDS board is an Ethernet Development Platform allowing for
evaluating many Microchip ethernet switch and PHY products. Various
daughter cards can connect via an RGMII connector or an RMII connector.
The EDS board is not intended for stand-alone use and has no ethernet
capabilities when no daughter board is connected. As such, this device
tree is intended to be used with a DT overlay defining the add-on board.
To better ensure consistency, some items are defined here as a form of
documentation so that all add-on overlays will use the same terms.
Link: https://www.microchip.com/en-us/development-tool/SAMA5D3-ETHERNET-DEVELOPMENT-SYSTEM
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
[claudiu.beznea: s/gpio-inputs/gpio-keys in at91-sama5d3_eds.dts]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909163022.13022-2-jerry.ray@microchip.com
Adding the SAMA5D3-EDS board from Microchip into the atmel AT91 board
description yaml file.
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909163022.13022-1-jerry.ray@microchip.com
Disable AES node on lan966x pcb8290, pcb891 and pcb8309 because these
boards have lan966x that uses secure OS which reserves the AES block.
Therefore it can't be exposed to non-secure world.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220908070451.3730608-1-horatiu.vultur@microchip.com
Highlights:
----------
- MPU:
- General:
- Add I2C support (5 instances) on STM32MP13.
- Add SPI support (5 instabces) on STM32MP13.
- Add timer interrupts support on STM32MP15.
- ST boards:
- Enable I2C1 and I2C5 on stm32mp135f-dk board.
- Add SPI5 on stm32mp135f-dk board but disabled as only available on
the GPIO expansion connector.
- ARGON:
- Remove spidev node as not used by the code.
-----BEGIN PGP SIGNATURE-----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=QRRi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=iYz9
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v6.1, round 1
Highlights:
----------
- MPU:
- General:
- Add I2C support (5 instances) on STM32MP13.
- Add SPI support (5 instabces) on STM32MP13.
- Add timer interrupts support on STM32MP15.
- ST boards:
- Enable I2C1 and I2C5 on stm32mp135f-dk board.
- Add SPI5 on stm32mp135f-dk board but disabled as only available on
the GPIO expansion connector.
- ARGON:
- Remove spidev node as not used by the code.
* tag 'stm32-dt-for-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: dts: stm32: argon: remove spidev node
ARM: dts: stm32: Create separate pinmux for qspi cs pin in stm32mp15-pinctrl.dtsi
ARM: dts: stm32: Fix typo in license text for Engicam boards
ARM: dts: stm32: Add timer interrupts on stm32mp15
ARM: dts: stm32: add pinctrl and disabled spi5 node in stm32mp135f-dk
ARM: dts: stm32: add spi nodes into stm32mp131.dtsi
ARM: dts: stm32: enable i2c1 and i2c5 on stm32mp135f-dk.dts
ARM: dts: stm32: add i2c nodes into stm32mp131.dtsi
Link: https://lore.kernel.org/r/d80afc20-2745-24a2-ab70-a5a03439bd50@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
different display outputs), Pine64 Pinephone Pro, Open AI Lab EAIDK-610.
New components of the rk356x (Video encoder/decoder, pcie, CSI dphy).
New board-peripherals for rock3a (pcie, i2c, regulators, rtc), quartz64-b
(pcie, analog audio) and BPI-R2-Pro (pcie), ROCK Pi (leds), Odroid Go (charger)
Usage of the new-ish bclk special handling for audio on rk3399.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmMb5bkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgXqMCACFPWLeVM94oEMr6RLP66BAgwZ6a9EF2CMi
P9Vu0A3Ruros7tjyHCDAMLCqdNUD7DnqEJanywN+vige1+0ybm9jg9XrOKTkij+j
CdeKh13guPHWn1eCfnZujfGMiSgdF0hVOCa6xfw3SWtSl0lzLjHf1OvEOqTTvpwS
6vTDbA1QIFXT5oB1UWYgwVT7H685Ry7GCbAUEJyXnjyBpUve2e5fzDUZJKrtBPCs
2Bt3K03zDdFeBeVUlU7X+CLJaDZ0yH3YCX4j6rJbbeysLvifO1Mw60D6SoiaLWNz
JN88eSfuCLidGus81G/jxAbxkfLIBBewVm3S4Txnq0y7ZdzA6PqL
=LcZi
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=cCcV
-----END PGP SIGNATURE-----
Merge tag 'v6.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
New boards the Anberic RG353P and RG503, Radxa Rock4c+ (variant with
different display outputs), Pine64 Pinephone Pro, Open AI Lab EAIDK-610.
New components of the rk356x (Video encoder/decoder, pcie, CSI dphy).
New board-peripherals for rock3a (pcie, i2c, regulators, rtc), quartz64-b
(pcie, analog audio) and BPI-R2-Pro (pcie), ROCK Pi (leds), Odroid Go (charger)
Usage of the new-ish bclk special handling for audio on rk3399.
* tag 'v6.1-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: use BCLK to GPIO switch on rk3399
arm64: dts: rockchip: Add Hantro encoder node to rk356x
arm64: dts: rockchip: Add VPU support for RK3568/RK3566
arm64: dts: rockchip: Enable PCIe controller on rock3a
arm64: dts: rockchip: add rtc to rock3a
arm64: dts: rockchip: Add PCIe 2 nodes to quartz64-b
arm64: dts: rockchip: add Anbernic RG353P and RG503
dt-bindings: arm: rockchip: Add Anbernic RG353P and RG503
dt-bindings: vendor-prefixes: add Anbernic
arm64: dts: rockchip: Add regulator suffix to BPI-R2-Pro
arm64: dts: rockchip: add LEDs for ROCK 4C+
arm64: dts: rockchip: add LED for ROCK Pi 4A/B/C/A+/B+
arm64: dts: rockchip: add rk817 chg to Odroid Go Advance
arm64: dts: rockchip: Fix SD card controller probe on Pinephone Pro
arm64: dts: rockchip: rk3399: Radxa ROCK 4C+
arm64: dts: rockchip: Add RK3399-T OPP table
dt-bindings: arm: rockchip: Document Radxa ROCK 4C+
arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro
dt-bindings: arm: rockchip: Add PinePhone Pro bindings
arm64: dts: rockchip: Add dts for a rk3399 based board EAIDK-610
...
Link: https://lore.kernel.org/r/5600929.DvuYhMxLoT@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 956b200a84 ("spi: spidev: Warn loudly if instantiated from DT
as "spidev"") states that there should not be spidev nodes in DTs.
Remove this non-HW description. There won't be a regression because it
won't bind since 2015 anyhow.
Fixes: 16e3e44c5b ("ARM: dts: stm32: Add support for the emtrion emSBC-Argon")
Cc: Reinhold Mueller <reinhold.mueller@emtrion.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Create a separate pinmux for qspi chip select in stm32mp15-pinctrl.dtsi.
In the case we want to use transfer_one() API to communicate with a SPI
device, chip select signal must be driven individually.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The timer units in the stm32mp15x CPUs have interrupts, depending on the
timer flavour either one "global" or four dedicated ones. Add the irqs
to the timer units on stm32mp15x.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add pinctrl information and a disabled spi5 node within
stm32mp135f-dk.dts in order to use the spi5 bus which is
available via the GPIO expansion pins of the STM32MP135 Discovery board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the 5 instances of spi busses supported by the stm32mp131.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Enable the two i2c busses i2c1 and i2c5 available on the
stm32mp135f-dk Discovery board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the 5 instances of i2c busses supported by the stm32mp131.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on
may cause the speaker melting issue. Removing LRCLK while BCLK
is present can cause unexpected output behavior including a large
DC output voltage as described in the Max98357a datasheet.
In order to:
1. prevent BCLK from turning on by other component.
2. keep BCLK and LRCLK being present at the same time
This patch adjusts the device tree to allow BCLK to switch
to GPIO func before LRCLK output, and switch back during
LRCLK is output.
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20220708080726.4170711-1-judyhsiao@chromium.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The RK3566 and RK3568 come with a dedicated Hantro instance solely for
encoding. This patch adds a node for this to the device tree, along with
a node for its MMU.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20220612155346.16288-4-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the nodes to enable the PCIe controller on the
Radxa ROCK3 Model A board. Run test with the MT7921
pcie wireless card.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20220726023516.6487-1-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The emac_rockchip.txt file is converted to YAML.
Phy nodes are now a subnode of mdio, so restyle
the emac nodes of rk3036/rk3066/rk3188.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220603163539.537-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Linux kernel has no logic to decide which driver to probe first.
To prevent race conditions remove the rk3036 emac node
fall back compatible string.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20220603163539.537-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Anbernic RG353P and RG503 are both RK3566 based handheld gaming devices
from Anbernic.
Both devices have:
- 2 SDMMC slots.
- A Realtek rtl8821cs WiFi/Bluetooth adapter.
- A mini HDMI port.
- A USB C host port and a USB C otg port (currently only working as
device).
- Multiple GPIO buttons and a single ADC button.
- Dual analog joysticks controlled via a GPIO mux.
- A headphone jack with amplified stereo speakers via a SGM4865 amp.
- A PWM based vibrator for force feedback.
The RG353P has:
- 2GB LPDDR4 RAM.
- A 32GB eMMC.
- A 3.5 inch 640x480 4-lane DSI panel of unknown origin with an i2c
controlled touchscreen (touchscreen is a Hynitron CST340).
The RG503 has:
- 1GB LPDDR4 RAM.
- A 5 inch 960x544 AMOLED 2-lane DSI/DBI panel manufactured by Samsung
with part number ams495qa04. Data for this panel is provided via the
DSI interface, however commands are sent via a 9-bit 3-wire SPI
interface. The MISO pin of SPI3 of the SOC is wired to the input of
the panel, so it must be bitbanged.
This devicetree enables the following hardware:
- HDMI (plus audio).
- Analog audio, including speakers.
- All buttons.
- All SDMMC/eMMC/SDIO controllers.
- The ADC joysticks (note a pending patch is required to use them).
- WiFi/Bluetooth (note out of tree drivers are required).
- The PWM based vibrator motor.
The following hardware is not enabled:
- The display panels (drivers are being written and there are issues
with the upstream DSI and VOP2 subsystems).
- Battery (driver pending).
- Touchscreen on the RG353P (note the i2c2 bus is enabled for it).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20220906210324.28986-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add entry for the Anbernic RG353P and RG503 handheld devices.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220906210324.28986-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
