For zero-copy (devmem, io_uring), the netdev DMA device used
is the parent device of the net device. However that is not
always accurate for mlx5 devices:
- SFs: The parent device is an auxdev.
- Multi-PF netdevs: The DMA device should be determined by
the queue.
This change implements the DMA device queue API that returns the DMA
device appropriately for all cases.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250827144017.1529208-6-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to the new API for fetching DMA devices for a netdev. The API is
called with queue index 0 for now which is equivalent with the previous
behavior.
This patch will allow devmem to work with devices where the DMA device
is not stored in the parent device. mlx5 SFs are an example of such a
device.
Multi-PF netdevs are still problematic (as they were before this
change). Upcoming patches will address this for the rx binding.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250827144017.1529208-5-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new API for getting a DMA device for a specific netdev queue.
This patch will allow io_uring zero-copy rx to work with devices
where the DMA device is not stored in the parent device. mlx5 SFs
are an example of such a device.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/20250827144017.1529208-4-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For zerocopy (io_uring, devmem), there is an assumption that the
parent device can do DMA. However that is not always the case:
- Scalable Function netdevs [1] have the DMA device in the grandparent.
- For Multi-PF netdevs [2] queues can be associated to different DMA
devices.
This patch introduces the a queue based interface for allowing drivers
to expose a different DMA device for zerocopy.
[1] Documentation/networking/device_drivers/ethernet/mellanox/mlx5/switchdev.rst
[2] Documentation/networking/multi-pf-netdev.rst
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20250827144017.1529208-3-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Duyck says:
====================
fbnic: Synchronize address handling with BMC
The fbnic driver needs to communicate with the BMC if it is operating on
the RMII-based transport (RBT) of the same port the host is on. To enable
this we need to add rules that will route BMC traffic to the RBT/BMC and
the BMC and firmware need to configure rules on the RBT side of the
interface to route traffic from the BMC to the host instead of the MAC.
To enable that this patch set addresses two issues. First it will cause the
TCAM to be reconfigured in the event that the BMC was not previously
present when the driver was loaded, but the FW sends a notification that
the FW capabilities have changed and a BMC w/ various MAC addresses is now
present. Second it adds support for sending a message to the firmware so
that if the host adds additional MAC addresses the FW can be made aware and
route traffic for those addresses from the RBT to the host instead of the
MAC.
====================
Link: https://patch.msgid.link/175623715978.2246365.7798520806218461199.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The MACDA TCAM can only be accessed by one entity at a time and as such we
cannot have simultaneous reads from the firmware to probe for changes from
the host. As such we have to send a message indicating what the state of
the MACDA is to the firmware when we updated it so that the firmware can
sync up the TCAMs it owns to route BMC packets to the host.
To support that we are adding a new message that is invoked when we write
the MACDA that will notify the firmware of updates from the host and allow
it to sync up the TCAM configuration to match the one on the host side.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623750782.2246365.9178255870985916357.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The BMC itself can decide to abandon a link and move onto another link in
the event of things such as a link flap. As a result the driver may load
with the BMC not present, and then needs to update things to support the
BMC being present while the link is up and the NIC is passing traffic.
To support this we add support to the watchdog to reinitialize the RPC to
support adding the BMC unicast, multicast, and multicast promiscuous
filters while the link is up and the NIC owns the link.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623750101.2246365.8518307324797058580.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To make the __fbnic_set_rx_mode and __fbnic_clear_rx_mode calls usable by
more points in the code we can make to that they expect a fbnic_dev pointer
instead of a netdev pointer.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623749436.2246365.6068665520216196789.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order for us to support the BMC possibly connecting, disconnecting, and
then reconnecting we need to be able to support entities outside of just
the NIC setting up promiscuous mode as the BMC can use a multicast
promiscuous setup.
To support that we should move the promisc_sync code out of the netdev and
into the RPC section of the driver so that it is reachable from more paths.
Signed-off-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/175623748769.2246365.2130394904175851458.stgit@ahduyck-xeon-server.home.arpa
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Piotr Kubik says:
====================
Add Si3474 PSE controller driver
From: Piotr Kubik <piotr.kubik@adtran.com>
These patch series provide support for Skyworks Si3474 I2C Power
Sourcing Equipment controller.
Based on the TPS23881 driver code.
Supported features of Si3474:
- get port status,
- get port power,
- get port voltage,
- enable/disable port power
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
====================
Link: https://patch.msgid.link/6af537dc-8a52-4710-8a18-dcfbb911cf23@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a driver for the Skyworks Si3474 I2C Power Sourcing Equipment
controller.
Driver supports basic features of Si3474 IC:
- get port status,
- get port power,
- get port voltage,
- enable/disable port power.
Only 4p configurations are supported at this moment.
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/9b72c8cd-c8d3-4053-9c80-671b9481d166@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the Si3474 I2C Power Sourcing Equipment controller device tree
bindings documentation.
Signed-off-by: Piotr Kubik <piotr.kubik@adtran.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/71a67c6f-6fce-49c7-96ec-554602dbd4f1@adtran.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet says:
====================
net: better drop accounting
Incrementing sk->sk_drops for every dropped packet can
cause serious cache line contention under DOS.
Add optional sk->sk_drop_counters pointer so that
protocols can opt-in to use two dedicated cache lines
to hold drop counters.
Convert UDP and RAW to use this infrastructure.
Tested on UDP (see patch 4/5 for details)
Before:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 615091 0.0
Udp6InErrors 3904277 0.0
Udp6RcvbufErrors 3904277 0.0
After:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 816281 0.0
Udp6InErrors 7497093 0.0
Udp6RcvbufErrors 7497093 0.0
====================
Link: https://patch.msgid.link/20250826125031.1578842-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a packet flood hits one or more RAW sockets, many cpus
have to update sk->sk_drops.
This slows down other cpus, because currently
sk_drops is in sock_write_rx group.
Add a socket_drop_counters structure to raw sockets.
Using dedicated cache lines to hold drop counters
makes sure that consumers no longer suffer from
false sharing if/when producers only change sk->sk_drops.
This adds 128 bytes per RAW socket.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-6-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a packet flood hits one or more UDP sockets, many cpus
have to update sk->sk_drops.
This slows down other cpus, because currently
sk_drops is in sock_write_rx group.
Add a socket_drop_counters structure to udp sockets.
Using dedicated cache lines to hold drop counters
makes sure that consumers no longer suffer from
false sharing if/when producers only change sk->sk_drops.
This adds 128 bytes per UDP socket.
Tested with the following stress test, sending about 11 Mpps
to a dual socket AMD EPYC 7B13 64-Core.
super_netperf 20 -t UDP_STREAM -H DUT -l10 -- -n -P,1000 -m 120
Note: due to socket lookup, only one UDP socket is receiving
packets on DUT.
Then measure receiver (DUT) behavior. We can see both
consumer and BH handlers can process more packets per second.
Before:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 615091 0.0
Udp6InErrors 3904277 0.0
Udp6RcvbufErrors 3904277 0.0
After:
nstat -n ; sleep 1 ; nstat | grep Udp
Udp6InDatagrams 816281 0.0
Udp6InErrors 7497093 0.0
Udp6RcvbufErrors 7497093 0.0
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-5-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some sockets suffer from heavy false sharing on sk->sk_drops,
and fields in the same cache line.
Add sk->sk_drop_counters to:
- move the drop counter(s) to dedicated cache lines.
- Add basic NUMA awareness to these drop counter(s).
Following patches will use this infrastructure for UDP and RAW sockets.
sk_clone_lock() is not yet ready, it would need to properly
set newsk->sk_drop_counters if we plan to use this for TCP sockets.
v2: used Paolo suggestion from https://lore.kernel.org/netdev/8f09830a-d83d-43c9-b36b-88ba0a23e9b2@redhat.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-4-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Existing sk_drops_add() helper is renamed to sk_drops_skbadd().
Add sk_drops_add() and convert sk_drops_inc() to use it.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-3-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We want to split sk->sk_drops in the future to reduce
potential contention on this field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250826125031.1578842-2-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The uAPI stddef header includes compiler_types.h, a kernel-only
header, to make sure that kernel definitions of annotations
like __counted_by() take precedence.
There is a hack in scripts/headers_install.sh which strips includes
of compiler.h and compiler_types.h when installing uAPI headers.
While explicit handling makes sense for compiler.h, which is included
all over the uAPI, compiler_types.h is only included by stddef.h
(within the uAPI, obviously it's included in kernel code a lot).
Remove the stripping from scripts/headers_install.sh and wrap
the include of compiler_types.h in #ifdef __KERNEL__ instead.
This should be equivalent functionally, but is easier to understand
to a casual reader of the code. It also makes it easier to work
with kernel headers directly from under tools/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250825201828.2370083-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski says:
====================
eth: fbnic: Extend hw stats support
Mohsin says:
Extend hardware stats support for fbnic by adding the ability to reset
hardware stats when the device experience a reset due to a PCI error and
include MAC stats in the hardware stats reset. Additionally, expand
hardware stats coverage to include FEC, PHY, and Pause stats.
v1: https://lore.kernel.org/20250822164731.1461754-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250825200206.2357713-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to read pause stats for fbnic. Unlike FEC and PCS stats,
pause stats won't wrap, do not fetch them under the service task. Since,
they are exclusively accessed via the ethtool API, don't include them in
fbnic_get_hw_stats().
]# ethtool -I -a eth0
Pause parameters for eth0:
Autonegotiate: on
RX: off
TX: off
Statistics:
tx_pause_frames: 0
rx_pause_frames: 0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support to fetch PHY stats consisting of PCS and FEC stats from the
device. When reading the stats counters, the lo part is read first, which
latches the hi part to ensure consistent reading of the stats counter.
FEC and PCS stats can wrap depending on the access frequency. To prevent
wrapping, fetch these stats periodically under the service task. Also to
maintain consistency fetch these stats along with other 32b stats under
__fbnic_get_hw_stats32().
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reset the MAC stats as part of the hardware stats reset to ensure
consistency. Currently, hardware stats are reset during device bring-up
and upon experiencing PCI errors; however, MAC stats are being skipped
during these resets.
When fbnic_reset_hw_stats() is called upon recovering from PCI error,
MAC stats are accessed outside the rtnl_lock. The only other access to
MAC stats is via the ethtool API, which is protected by rtnl_lock. This
can result in concurrent access to MAC stats and a potential race. Protect
the fbnic_reset_hw_stats() call in __fbnic_pm_attach() with rtnl_lock to
avoid this.
Note that fbnic_reset_hw_mac_stats() is called outside the hardware
stats lock which protects access to the fbnic_hw_stats. This is intentional
because MAC stats are fetched from the device outside this lock and are
exclusively read via the ethtool API.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upon experiencing a PCI error, fbnic reset the device to recover from
the failure. Reset the hardware stats as part of the device reset to
ensure accurate stats reporting.
Note that the reset is not really resetting the aggregate value to 0,
which may result in a spike for a system collecting deltas in stats.
Rather, the reset re-latches the current value as previous, in case HW
got reset.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move hw_stats_lock out of fbnic_dev to a more appropriate struct
fbnic_hw_stats since the only use of this lock is to protect access to
the hardware stats. While at it, enclose the lock and stats
initialization in a single init call.
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825200206.2357713-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca says:
====================
macsec: replace custom netlink attribute checks with policy-level checks
We can simplify attribute validation a lot by describing the accepted
ranges more precisely in the policies, using NLA_POLICY_MAX etc.
Some of the checks still need to be done later on, because the
attribute length and acceptable range can vary based on values that
can't be known when the policy is validated (cipher suite determines
the key length and valid ICV length, presence of XPN changes the PN
length, detection of duplicate SCIs or ANs, etc).
As a bonus, we get a few extack messages from the policy
validation. I'll add extack to the rest of the checks (mostly in the
genl commands) in an future series.
v1: https://lore.kernel.org/netdev/cover.1664379352.git.sd@queasysnail.net
====================
Link: https://patch.msgid.link/cover.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MACSEC_SA_ATTR_PN is either a u32 or a u64, we can now use NLA_UINT
for this instead of a custom binary type. We can then use a min check
within the policy.
We need to keep the length checks done in macsec_{add,upd}_{rx,tx}sa
based on whether the device is set up for XPN (with 64b PNs instead of
32b).
On the dump side, keep the existing custom code as userspace may
expect a u64 when using XPN, and nla_put_uint may only output a u32
attribute if the value fits.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c9d32bd479cd4464e09010fbce1becc75377c8a0.1756202772.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krishna Kumar says:
====================
net: Prevent RPS table overwrite of active flows
This series splits the original RPS patch [1] into two patches for
net-next. It also addresses a kernel test robot warning by defining
rps_flow_is_active() only when aRFS is enabled. I tested v3 with
four builds and reboots: two for [PATCH 1/2] with aRFS enabled &
disabled, and two for [PATCH 2/2]. There are no code changes in v4
and v5, only documentation. Patch v6 has one line change to keep
'hash' field under #ifdef, and was test built with aRFS=on and
aRFS=off. The same two builds were done for v7, along with 15m load
testing with aRFS=on to ensure the new changes are correct.
The first patch prevents RPS table overwrite for active flows thereby
improving aRFS stability.
The second patch caches hash & flow_id in get_rps_cpu() to avoid
recalculating it in set_rps_cpu().
[1] lore.kernel.org/netdev/20250708081516.53048-1-krikku@gmail.com/
[2] lore.kernel.org/netdev/20250729104109.1687418-1-krikku@gmail.com/
====================
Link: https://patch.msgid.link/20250825031005.3674864-1-krikku@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
get_rps_cpu() can cache flow_id and hash as both are required by
set_rps_cpu() instead of recalculating them twice.
Signed-off-by: Krishna Kumar <krikku@gmail.com>
Link: https://patch.msgid.link/20250825031005.3674864-3-krikku@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes an issue where two different flows on the same RXq
produce the same hash resulting in continuous flow overwrites.
Flow #1: A packet for Flow #1 comes in, kernel calls the steering
function. The driver gives back a filter id. The kernel saves
this filter id in the selected slot. Later, the driver's
service task checks if any filters have expired and then
installs the rule for Flow #1.
Flow #2: A packet for Flow #2 comes in. It goes through the same steps.
But this time, the chosen slot is being used by Flow #1. The
driver gives a new filter id and the kernel saves it in the
same slot. When the driver's service task runs, it runs through
all the flows, checks if Flow #1 should be expired, the kernel
returns True as the slot has a different filter id, and then
the driver installs the rule for Flow #2.
Flow #1: Another packet for Flow #1 comes in. The same thing repeats.
The slot is overwritten with a new filter id for Flow #1.
This causes a repeated cycle of flow programming for missed packets,
wasting CPU cycles while not improving performance. This problem happens
at higher rates when the RPS table is small, but tests show it still
happens even with 12,000 connections and an RPS size of 16K per queue
(global table size = 144x16K = 64K).
This patch prevents overwriting an rps_dev_flow entry if it is active.
The intention is that it is better to do aRFS for the first flow instead
of hurting all flows on the same hash. Without this, two (or more) flows
on one RX queue with the same hash can keep overwriting each other. This
causes the driver to reprogram the flow repeatedly.
Changes:
1. Add a new 'hash' field to struct rps_dev_flow.
2. Add rps_flow_is_active(): a helper function to check if a flow is
active or not, extracted from rps_may_expire_flow(). It is further
simplified as per reviewer feedback.
3. In set_rps_cpu():
- Avoid overwriting by programming a new filter if:
- The slot is not in use, or
- The slot is in use but the flow is not active, or
- The slot has an active flow with the same hash, but target CPU
differs.
- Save the hash in the rps_dev_flow entry.
4. rps_may_expire_flow(): Use earlier extracted rps_flow_is_active().
Testing & results:
- Driver: ice (E810 NIC), Kernel: net-next
- #CPUs = #RXq = 144 (1:1)
- Number of flows: 12K
- Eight RPS settings from 256 to 32768. Though RPS=256 is not ideal,
it is still sufficient to cover 12K flows (256*144 rx-queues = 64K
global table slots)
- Global Table Size = 144 * RPS (effectively equal to 256 * RPS)
- Each RPS test duration = 8 mins (org code) + 8 mins (new code).
- Metrics captured on client
Legend for following tables:
Steer-C: #times ndo_rx_flow_steer() was Called by set_rps_cpu()
Steer-L: #times ice_arfs_flow_steer() Looped over aRFS entries
Add: #times driver actually programmed aRFS (ice_arfs_build_entry())
Del: #times driver deleted the flow (ice_arfs_del_flow_rules())
Units: K = 1,000 times, M = 1 million times
|-------|---------|------| Org Code |---------|---------|
| RPS | Latency | CPU | Add | Del | Steer-C | Steer-L |
|-------|---------|------|--------|--------|---------|---------|
| 256 | 227.0 | 93.2 | 1.6M | 1.6M | 121.7M | 267.6M |
| 512 | 225.9 | 94.1 | 11.5M | 11.2M | 65.7M | 199.6M |
| 1024 | 223.5 | 95.6 | 16.5M | 16.5M | 27.1M | 187.3M |
| 2048 | 222.2 | 96.3 | 10.5M | 10.5M | 12.5M | 115.2M |
| 4096 | 223.9 | 94.1 | 5.5M | 5.5M | 7.2M | 65.9M |
| 8192 | 224.7 | 92.5 | 2.7M | 2.7M | 3.0M | 29.9M |
| 16384 | 223.5 | 92.5 | 1.3M | 1.3M | 1.4M | 13.9M |
| 32768 | 219.6 | 93.2 | 838.1K | 838.1K | 965.1K | 8.9M |
|-------|---------|------| New Code |---------|---------|
| 256 | 201.5 | 99.1 | 13.4K | 5.0K | 13.7K | 75.2K |
| 512 | 202.5 | 98.2 | 11.2K | 5.9K | 11.2K | 55.5K |
| 1024 | 207.3 | 93.9 | 11.5K | 9.7K | 11.5K | 59.6K |
| 2048 | 207.5 | 96.7 | 11.8K | 11.1K | 15.5K | 79.3K |
| 4096 | 206.9 | 96.6 | 11.8K | 11.7K | 11.8K | 63.2K |
| 8192 | 205.8 | 96.7 | 11.9K | 11.8K | 11.9K | 63.9K |
| 16384 | 200.9 | 98.2 | 11.9K | 11.9K | 11.9K | 64.2K |
| 32768 | 202.5 | 98.0 | 11.9K | 11.9K | 11.9K | 64.2K |
|-------|---------|------|--------|--------|---------|---------|
Some observations:
1. Overall Latency improved: (1790.19-1634.94)/1790.19*100 = 8.67%
2. Overall CPU increased: (777.32-751.49)/751.45*100 = 3.44%
3. Flow Management (add/delete) remained almost constant at ~11K
compared to values in millions.
Signed-off-by: Krishna Kumar <krikku@gmail.com>
Link: https://patch.msgid.link/20250825031005.3674864-2-krikku@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'ret' variable in ipc_pcie_resources_request() either stores '-EBUSY'
directly or holds returns from pci_request_regions() and ipc_acquire_irq().
Storing negative error codes in u32 causes no runtime issues but is
stylistically inconsistent and very ugly. Change 'ret' from u32 to int
type - this has no runtime impact.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20250826135021.510767-1-rongqianfeng@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
swphy_read_reg() doesn't change the passed struct fixed_phy_status,
so we can pass &fp->status directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/c49195c7-a3a1-485c-baed-9b33740752de@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use int instead of unsigned int for the 'ret' variable to store return
values from functions that either return zero on success or negative error
codes on failure. Storing negative error codes in an unsigned int causes
no runtime issues, but it's ugly as pants, Change 'ret' from unsigned int
to int type - this change has no runtime impact.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250826142159.525059-1-rongqianfeng@vivo.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For some odd reason we were very jealous about the value of the EMAC
clock register from the syscon block, insisting on a reset value and
only doing read-modify-write operations on that register, even though we
pretty much know the register layout.
This already led to a basically redundant entry for the H6, which only
differs by that value. We seem to have the same situation with the new
A523 SoC, which again is compatible to the A64, but has a different
syscon reset value.
Drop any assumptions about that value, and set or clear the bits that we
want to program, from scratch (starting with a value of 0). For the
remove() implementation, we just turn on the POWERDOWN bit, and deselect
the internal PHY, which mimics the existing code.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Corentin LABBE <clabbe.montjoie@gmail.com>
Tested-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250825172055.19794-1-andre.przywara@arm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of stating the supported values for the ti,rx-gain-reduction-db
property in free text format, add an enum entry that can help validating
the devicetree files.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250826141736.712827-1-festevam@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RK3328 GMAC clock delay macros define enable/disable controls for
TX and RX clock delay. While the TX definitions are correct, the
RXCLK_DLY_DISABLE macro incorrectly clears bit 0.
The macros RK3328_GMAC_TXCLK_DLY_DISABLE and
RK3328_GMAC_RXCLK_DLY_DISABLE are not referenced anywhere
in the driver code. Remove them to clean up unused definitions.
No functional change.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20250826102219.49656-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds support for the TRIGGER_NETDEV_LINK trigger. It activates
the LED when a link is established, regardless of the speed.
Tested on Orange Pi PC2 with RTL8211E PHY.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250825211059.143231-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
